Lamp and Control Panel (Lamp Panel)

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "Lamp and Control Panel (Lamp Panel)"

Transcription

1 Lamp and Control Panel (Lamp Panel) Operating Instructions BA 47/0 EN

2 NOTE! Changes may have been made to a product after going to press with this documentation. We expressly reserve the right to make changes to a product s technical data and design, as well as changes to the scope of delivery. In all cases, the information submitted and agreements concluded during processing of the quotation and order in question shall be binding.

3 Table of Contents Table of Contents About this document Safety instructions Validity Documents for the device Operating instructions (this document)... 5 Safety instructions... 6 General notes Intended use Transport and packaging Performance features Scope of delivery Function Continuous contact series Decade contact range Views and connection Front view Rear view Connection Technical data Appendix Connection to a continuous contact range, horizontal/vertical lamp panel Connection to a decade contact range, horizontal/vertical lamp panel... Operating Instructions BA 47/0 EN Lamp Panel 47/0 EN Maschinenfabrik Reinhausen GmbH 009

4

5 About this document About this document. Safety instructions The following safety instructions relating to the operation of the Lamp Panel are used in this document. These instructions must always be observed. ATTENTION! Designates a possibly damaging situation. If this situation is not prevented, the product or something in the vicinity may be damaged.. Validity This document is valid for the Lamp Panel.. Documents for the device NOTE! The target group of these documents is specially trained, authorized expert personnel only. NOTE! Contains important information and special notes... Operating instructions (this document) The operating instructions contain detailed descriptions of the connection, commissioning, and operation of the device. In addition, it also contains safety instructions and general instructions regarding the device. Operating Instructions BA 47/0 EN Lamp Panel 47/0 EN Maschinenfabrik Reinhausen GmbH 009 5

6 Safety instructions Safety instructions The respective responsible party for transportation, installation, operation, maintenance, and the disposal of the product or parts of the product must ensure the following in order to avoid accidents, malfunctions and collisions as well as undesired effects on the environment: All warnings and safety instructions must be observed at all times! Failure to follow the safety instructions may lead to accidents and severe personal injury for you or your colleagues. Please read this document before commissioning the equipment! Please read this document before commissioning the Lamp Panel. As the operator, you are responsible for making sure that the staff has understood the operation and safety instructions. Train your staff! Before asking staff to work with the device, provide training regarding general and special safety instructions and accident prevention regulations. Only suitably qualified personnel should work with the Lamp Panel! The Lamp Panel is designed exclusively for application in electrical or energy systems and facilities operated by appropriately trained staff, who perform the necessary work. This staff comprises people who are familiar with the installation, assembly, commissioning and operation of such products. Make sure that all information is available to the staff! Make sure that it is always possible for personnel to view the regulations and operating instructions for safe work and the applicable information on behavior during accidents and fires, and if necessary, this information must be posted at the place of work. Do not make any changes in the device! Do not make any changes in the device without consulting with Maschinenfabrik Reinhausen. Improper changes can lead to personal injury, property damage, and malfunctions. Maschinenfabrik Reinhausen assumes no liability for damage from unpermitted or improper changes in the device. Observe the characteristic data! The service life of the device can be reduced by unsuitable ambient conditions and incorrect mounting. Make sure the specified operating conditions, installation site requirements, and maintenance regulations are observed. Make sure that the necessary devices and protective equipment are available! Make sure that the devices and precautions required for safe work and the personal protective equipment required for certain jobs are available and put to use. Operating Instructions BA 47/0 EN Lamp Panel 6 Maschinenfabrik Reinhausen GmbH /0 EN

7 General notes General notes The product and the delivered devices and special tools meet the laws, regulations and standards, and in particular the applicable safety and health requirements, which were valid at the time of the delivery. When used as intended and when the prerequisites and conditions listed in this document and the warnings in the document and/ or on the product itself are observed, the product does not represent a danger to persons, property and environment. This applies over the entire lifespan, from delivery to installation and operation up until disassembly and disposal. The company quality assurance system ensures a uniformly high quality standard, in particular with respect to the adherence to safety and health requirements.. Intended use. Transport and packaging ATTENTION! Damage to the lamp panel! Pay attention to the changed connection diagrams when you replace a previous model of this lamp panel with this one. ATTENTION! Impairment of the drive, on-load tap-changer, and transformer function! Only use the lamp panel for the onload tap-changer specified in the order. Installation, electrical connection and commissioning of the lamp panel must only be carried out by qualified, skilled personnel and only in accordance with these operating instructions. The plant owner must ensure the intended use of the lamp panel. For safety reasons, any unauthorized work such as installation, alteration, electrical connection, commissioning or modification to the lamp panel is forbidden without first consulting MR! The trouble-free operation of the drive, the on-load tap-changer and the transformer may be put at risk. Keep the original packaging for later transport. Maschinenfabrik Reinhausen does not assume responsibility for damage due to improper transport. Shipping should take place only using the original packaging. If the original packaging is no longer available, make sure the new packaging provides sufficient protection from damage, moisture, heat, and cold.. Performance features The Lamp Panel is particularly characterized by the following properties: Easy installation and operation Compact, lightweight construction Display of the operating position of the on-load tapchanger in a control room Remote-controlled change of the operating position of the on-load tap-changer.4 Scope of delivery The lamp panel is shipped as follows: Lamp panel (standard housing) Two fastening clips (Form B) Operating instructions NOTE! The shipment is to be fully checked for completeness on the basis of the shipping documents. The parts must be stored in a dry place until assembly. The scope of functions of the device depend on the ordered equipment or device variant, not on the contents of this documentation. Operating Instructions BA 47/0 EN Lamp Panel 47/0 EN Maschinenfabrik Reinhausen GmbH 009 7

8 General notes.5 Function The lamp panel is used for the display of the current operating position of the on-load tap-changer and the manual change of the operating position from any location. The distance between this location and the motor-drive unit is limited to the voltage drop of the line and depends on the voltage applied on the motor-drive unit. The number of displayed operating positions depends on whether a continuous or decade contact range is connected to the lamp panel..5. Continuous contact range In the case of the system of the continuous contact range, a terminal of the position transmitter module is assigned to each position of the on-load tap-changer. Only this terminal leads to a signal in the intended position, but all other terminals do not. Since 8 lighting elements are provided on the lamp panel, a maximum of 8 positions can be displayed with one continuous contact range connected to a lamp panel (Figure )..5. Decade contact range If more than 8 positions are to be displayed, a decade contact range must be connected to the lamp panel. In the process, the zero and first power are displayed separately. 0 terminals are assigned the values 0 to 9 and 0 terminals the values 00 to 90. In Position 9, for example, the terminal with a value of 9 and the terminal with a value of 0 conduct signals (Figure ). Decimal Continuous contact range Figure Continuous contact range Decimal Decade contact range Decimal Decade contact range Figure Decade contact range Operating Instructions BA 47/0 EN Lamp Panel 8 Maschinenfabrik Reinhausen GmbH /0 EN

9 4 Views and connection 4 Views and connection 4. Front view 4. Connection 4 4 ATTENTION! Damage to the lamp panel! Before connecting the lamp panel, make sure it is de-energized. Otherwise, individual components may be damaged. The lamp panel should be connected according to the connecting diagrams in Chapter 6. and Chapter 6.. Figure Front view ) Illuminated switching element for adjusting the operating position in the "RAISE" direction with integrated LED for displaying a (direction-dependent) run indication. ) Illuminated switching element for trigging the motor protective switch with integrated LED for displaying the "Motor protective switch OFF" message. ) Illuminated switching element for adjusting the operating position in the "LOWER" direction with integrated LED for displaying a (direction-dependent) run indication. 4) Display of the respective operating position of the on-load tap-changer (operating positions -8 or 0-90; see Chapter.5). 4. Rear view X4 X5 X6 X7 X X X AC out AC out Test AC out PE Power TAPIND 0 Power: Fuse: Serial no.: 48-60V AC,5 A Figure 4 Rear view X Connection of the motor-drive unit (raise, lower, motor protective switch) X Power, grounding X Internal wiring, lamp test X4-X7 Connection of the motor-drive unit (display of the operating positions) Operating Instructions BA 47/0 EN Lamp Panel 47/0 EN Maschinenfabrik Reinhausen GmbH 009 9

10 5 Technical data 5 Technical data Connection: Phoenix connector with screw-type connection technology, 0.5 to 0.75 mm Supply: connecting terminals ( x power, x PE), in a pluggable design Input voltage: Via all-voltage power supply unit DC/AC V (50/60 Hz), preliminary fuse A Actuation: 8 connecting terminals (Inputs -8), in a pluggable design Actuation of the motor-drive unit: 9 connecting terminals, in a pluggable design Lamp test: connecting terminals (potential-free N/O contact) Operating temperature: -5 C to +50 C Storage: -5 C to +70 C Degree of protection: IP0 Dimensions: 96 x 9 x 6.5 mm Control panel cutout: 9 x 85 mm Attachment: Fastening clip, Form B - DIN 485 Installation depth: Max. 5 mm (8 mm front frame height) Weight: About 800 g Operating Instructions BA 47/0 EN Lamp Panel 0 Maschinenfabrik Reinhausen GmbH /0 EN

11 6 Appendix 6 Appendix 6. Connection to a continuous contact range, horizontal/vertical lamp panel L / L V AC/DC N / L- X... 4 ED S40M N/O CONTACT RANGE S40P Lamppanel AC out AC out Test AC out Lamptest PE 9 9 PE POWER POWER Operating Instructions BA 47/0 EN Lamp Panel 47/0 EN Maschinenfabrik Reinhausen GmbH 009

12 & ' $ % ( # & ' $ % ( # # $ #! % & $ # $ #! % & $ * " "!! 6 Appendix 6. Connection to a decade contact range, horizontal/vertical lamp panel L / L V AC/DC N / L- 4 X5: ED Lamppanel S5AM S5AP S5BM S5BP AC out 8 AC out Test AC out Lamptest PE 9 9 PE POWER 6 6 POWER Operating Instructions BA 47/0 EN Lamp Panel Maschinenfabrik Reinhausen GmbH /0 EN

13

14

15

16 Maschinenfabrik Reinhausen GmbH Tel.: Falkensteinstraße 8 Fax: Regensburg, Germany BA 47/0 EN 04/09 F090 Printed in Germany

Drive electronics pq12

Drive electronics pq12 Drive electronics pq12 Amplifier module with constant current controller for proportional valves Control of one solenoid Easy mounting directly on bearing rails acc. to EN 50022 Standard voltage and current

More information

Compact Orifice FlowMeter

Compact Orifice FlowMeter Steam Data Reference Tables IM/OM/SDT Issue 1 Compact Orifice FlowMeter ABB The Company We are an established world force in the design and manufacture of instrumentation for industrial process control,

More information

Operating Instructions for Digital Manometer. Model: MAN-SD

Operating Instructions for Digital Manometer. Model: MAN-SD Operating Instructions for Digital Manometer Model: MAN-SD 1. Contents 1. Contents...2 2. Note...3 3. Instrument Inspection...3 4. Regulation Use...4 5. Operating Principle...4 6. Mechanical Connection...5

More information

Installation guide 862 MIT / MIR

Installation guide 862 MIT / MIR Installation guide 862 MIT / MIR in combination with: 864 MTT or 863 MRT or (dual) spot element November 2005 Part no. 4416.232_Rev3 Enraf BV PO Box 812 2600 AV Delft Netherlands Tel. : +31 15 2701 100

More information

AIR CONDITIONER (SPLIT TYPE) SERVICE MANUAL

AIR CONDITIONER (SPLIT TYPE) SERVICE MANUAL AIR CONDITIONER (SPLIT TYPE) SERVICE MANUAL FILE No. A10-023-1 REVISION 1 : Mar.2012 Re-edit version.( file volume down) Contents have NOT been changed. Model name: RAS-M10PKVP-E RAS-M13PKVP-E RAS-M16PKVP-E

More information

Latest generation testo air velocity & IAQ probes with cable handle. Instruction manual

Latest generation testo air velocity & IAQ probes with cable handle. Instruction manual Latest generation testo air velocity & IAQ probes with cable handle Instruction manual Contents Contents 1 About this document... 5 2 Safety and disposal... 5 3 System description... 6 4 Description of

More information

PHOENIX CONTACT - 04/2016. Features

PHOENIX CONTACT - 04/2016. Features Signal conditioner Data sheet 100238_de_06 1 Description PHOENIX CONTACT - 04/2016 Features The MCR-C-UI-UI(-450)-DCI(-NC) 3-way isolation amplifier is used to electrically isolate and convert analog signals.

More information

Instruction. Vacuum Circuit Breaker Operator Module. Type 3AH 4.16kV to 38kV. Power Transmission & Distribution

Instruction. Vacuum Circuit Breaker Operator Module. Type 3AH 4.16kV to 38kV. Power Transmission & Distribution Instruction 0001-22-2--00 Vacuum Circuit Breaker Operator Module Type 3AH 4.16kV to 38kV Power Transmission & Distribution Hazardous voltages and high-speed moving parts. Will cause death, serious injury

More information

ER2 Short-head Electric Chain Hoist

ER2 Short-head Electric Chain Hoist O/M NO.SHER2-0903-CE-00 ER2 Short-head Electric Chain Hoist (250kg to 5t) Operation Manual (SHER2M/SHER2SG/SHER2SP) Introduction The KITO Short-head Electric Chain Hoist is intended for effective use in

More information

ISOCON-3 MAINS POWERED ISOLATING SIGNAL CONVERTER

ISOCON-3 MAINS POWERED ISOLATING SIGNAL CONVERTER ISOCON-3 MAINS POWERED ISOLATING SIGNAL CONVERTER CAUTION: This equipment is designed for connection to mains voltages and must be used in accordance with this guide. If it is not, the safety protection

More information

RADIATION SAFETY GUIDELINES FOR NON-USERS

RADIATION SAFETY GUIDELINES FOR NON-USERS RADIATION SAFETY GUIDELINES FOR NON-USERS This is a Read and Sign Awareness Training document. You should read and sign this document if you: 1. DO NOT work directly with radioactive materials, but 2.

More information

N) manual. Biomaster Operating manual

N) manual. Biomaster Operating manual 830 ual N) manual Operating manual Copyright 2013 Eppendorf AG, Hamburg. No part of this publication may be reproduced without the prior permission of the copyright owner. Trademarks Eppendorf and the

More information

AM 500A 500 WATT AM 1A 1 KILOWATT AM BROADCAST TRANSMITTERS. October, 1999 IM No

AM 500A 500 WATT AM 1A 1 KILOWATT AM BROADCAST TRANSMITTERS. October, 1999 IM No AM 500A 500 WATT AM 1A 1 KILOWATT AM BROADCAST TRANSMITTERS October, 1999 IM No. 597 1112 EQUIPMENT LOST OR DAMAGED IN TRANSIT. When delivering the equipment to you, the truck driver or carrier s agent

More information

Installation Manual. Installation manual for PerfectEnergy Solar Modules. Content

Installation Manual. Installation manual for PerfectEnergy Solar Modules. Content Installation manual for PerfectEnergy Solar Modules Content 1. Preface 2. Technical data/general 3. Safety instructions 4. Mechanical Installation 5. Electrical installation 6. Grounding 7. Maintenance

More information

THE POWER OF ASTRONERGY

THE POWER OF ASTRONERGY ASM6610 module series with 40mm frame THE POWER OF ASTRONERGY CRYSTALLINE SILICON PV MODULE INSTALLATION GUIDE CRYSTALLINE SILICON PV MODULE INSTALLATION GUIDE 1. Introduction 1.1 About this installation

More information

3B SCIENTIFIC PHYSICS

3B SCIENTIFIC PHYSICS 3B SCIENIFIC PHYSICS Stefan-Boltzmann Lamp 1008523 Instruction manual 11/12 NF/ALF 1. Safety instructions he Stefan-Boltzmann lamp conforms to the safety stipulations for electrical measuring, control

More information

Type B xxx/60. Snowplough // USER MANUAL Version 1.0 EN. Art.Nr.:

Type B xxx/60. Snowplough // USER MANUAL Version 1.0 EN. Art.Nr.: USER MANUAL Type B xxx/60 Snowplough 21.12.2012 Version 1.0 EN Art.Nr.: 10040218 Kugelmann Maschinenbau e.k. Gewerbepark 1-5 87675 Rettenbach a.a. GERMANY www.kugelmann.com office@kugelmann.com +49 (0)

More information

ISOCON-6. 24V AC or DC POWERED ISOLATING SIGNAL CONVERTER

ISOCON-6. 24V AC or DC POWERED ISOLATING SIGNAL CONVERTER ISOCON-6 24V AC or DC POWERED ISOLATING SIGNAL CONVERTER Whilst every effort has been taken to ensure the accuracy of this document, we accept no responsibility for damage, injury, loss or expense resulting

More information

PLOW MOUNT KIT FOR POLARIS RANGER P/N ASSEMBLY / OWNERS MANUAL

PLOW MOUNT KIT FOR POLARIS RANGER P/N ASSEMBLY / OWNERS MANUAL PLOW MOUNT KIT FOR POLARIS RANGER P/N 34-3010 ASSEMBLY / OWNERS MANUAL Application PLOW PUSH FRAME NO. 34-0000 or 34-0070 Before you begin, please read these instructions and check to be sure all parts

More information

Presco AG. Standard Air Capacitor 10 nf / 2 kv. Type CL-0N10-K201. User's manual

Presco AG. Standard Air Capacitor 10 nf / 2 kv. Type CL-0N10-K201. User's manual Zürcherstrasse 70 -CH 8104 Weiningen Tel. + 41 44 750 63 63 Fax + 41 44 750 63 66 P.O. Box 155 Switzerland Email info@prescoag.com Internet : www.prescoag.com Standard Air Capacitor 10 nf / 2 kv Type CL-0N10-K201

More information

FrelTec GmbH. Shielded SMD Power Inductors Power Choke

FrelTec GmbH. Shielded SMD Power Inductors Power Choke GmbH Mathildenstr. 10A 82319 Starnberg Germany Power Choke 11/18/2015 1/16 GmbH www.freltec.com SPECIFICATION Part Number 175 0315D * 101 * M E02 ** Type Size Value Tolerance Packing 175 : Shielded SMD

More information

SPECIFICATION SHEET : FHS2-UNV-36L

SPECIFICATION SHEET : FHS2-UNV-36L SPECIFICATION SHEET : FHS2-UNV-36L This Is An Original Product From Fulham Co., Inc Description : For Back-up Lighting This driver will operate constant current LED arrays with a working voltage between

More information

Field Pro Operation and Installation Manual

Field Pro Operation and Installation Manual Field Pro Operation and Installation Manual Xtreme Research Corporation SkyScan Division P.O. Box 336, Port Richey, FL 34673-0336 1-800-732-0665 Table of Contents 1. Installation 3 2. Operation 5 3. Care

More information

Safety Precautions WARNING If critical situations that could lead to user s death or serious injury is assumed by mishandling of the product.

Safety Precautions WARNING If critical situations that could lead to user s death or serious injury is assumed by mishandling of the product. Safety Precautions Observe the following notices to ensure personal safety or to prevent accidents. To ensure that you use this product correctly, read this User s Manual thoroughly before use. Make sure

More information

Request Ensure that this Instruction Manual is delivered to the end users and the maintenance manager.

Request Ensure that this Instruction Manual is delivered to the end users and the maintenance manager. Request Ensure that this Instruction Manual is delivered to the end users and the maintenance manager. 1 -C - Safety section - This Safety section should be read before starting any work on the relay.

More information

PLOW MOUNT KIT FOR YAMAHA VIKING P/N ASSEMBLY / OWNERS MANUAL. Application PLOW PUSH FRAME NO or

PLOW MOUNT KIT FOR YAMAHA VIKING P/N ASSEMBLY / OWNERS MANUAL. Application PLOW PUSH FRAME NO or PLOW MOUNT KIT FOR YAMAHA VIKING P/N 34-5020 ASSEMBLY / OWNERS MANUAL Application PLOW PUSH FRAME NO. 34-0000 or 34-0070 Before you begin, please read these instructions and check to be sure all parts

More information

Eppendorf SmartBlock. Instructions for use

Eppendorf SmartBlock. Instructions for use Instructions for use Instructions Eppendorf see Fig. Tab. p. p. SmartBlock for use Copyright 2016 Eppendorf AG, Germany. All rights reserved, including graphics and images. No part of this publication

More information

FOR POLARIS ATV s P/N ASSEMBLY / OWNERS MANUAL

FOR POLARIS ATV s P/N ASSEMBLY / OWNERS MANUAL MID-MOUNT KIT FOR POLARIS ATV s P/N 15-3591 ASSEMBLY / OWNERS MANUAL Application PLOW PUSH FRAME NO. 15-0070, 33-0000 or 33-0070 Before you begin, please read these instructions and check to be sure all

More information

Ultra-Small Footprint N-Channel FemtoFET MOSFET Test EVM

Ultra-Small Footprint N-Channel FemtoFET MOSFET Test EVM User's Guide SLPU007 December 07 Ultra-Small Footprint N-Channel FemtoFET MOSFET Test EVM Contents Introduction... Description... Electrical Performance Specifications... 4 Schematic... 4 Test Setup....

More information

Eppendorf Vis Cuvettes. Instructions for use

Eppendorf Vis Cuvettes. Instructions for use Eppendorf Vis Cuvettes Instructions for use Copyright 2013 Eppendorf AG, Hamburg. No part of this publication may be reproduced without the prior permission of the copyright owner. Eppendorf, the Eppendorf

More information

Chip tantalum capacitors (Fail-safe open structure type)

Chip tantalum capacitors (Fail-safe open structure type) TCFG0J106M8R Chip tantalum capacitors (Fail-safe open structure type) TCFG Series Case Features 1) Safety design by open function built - in. 2) Wide capacitance range 3) Screening by thermal shock. Dimensions

More information

WCAP-AS5H Aluminum Electrolytic Capacitors

WCAP-AS5H Aluminum Electrolytic Capacitors A Dimensions: [mm] B Recommended hole pattern: [mm] D1 Electrical Properties: Properties Test conditions Value Unit Tol. Capacitance 0.25V; 120Hz C 10 µf ± 20% Rated voltage U R 16 V (DC) max. Leakage

More information

Procedure To Be Adopted When Working on High Voltage Mechanically Switched Capacitors with Damping Network (MSCDN)

Procedure To Be Adopted When Working on High Voltage Mechanically Switched Capacitors with Damping Network (MSCDN) 1. SCOPE This document details the procedures to be adopted when working on High Voltage Mechanically Switched Capacitors with. 2. ISSUE RECORD This is a Reference document. The current version is held

More information

FOREMAN ASSEMBLY / OWNER S MANUAL

FOREMAN ASSEMBLY / OWNER S MANUAL ATV PLOW MOUNT For HONDA FOREMAN ASSEMBLY / OWNER S MANUAL Part No: 15-1610 MAN0418 Rev. 00 OPERATING INSTRUCTIONS Congratulations! You ve just purchased the most durable plow component in the industry.

More information

VK2 volume flow controller Overview

VK2 volume flow controller Overview New option with sound attenuator Maintenance-free VK2 volume flow controller that operates without an auxiliary power supply, for ventilation and air conditioning systems. Adjustable on site. Outstanding

More information

DRIFTER PLOW-IN-A-BOX

DRIFTER PLOW-IN-A-BOX DRIFTER PLOW-IN-A-BOX ASSEMBLY / OWNER S MANUAL Part No: 10-0550 OPERATING INSTRUCTIONS Congratulations! You ve just purchased one of the industry s top plow systems. The DRIFTER Plow System works great

More information

FLT5A FLT5A. abc. abc. Thermometer User Guide. Thermometer User Guide. Internet:

FLT5A FLT5A. abc. abc. Thermometer User Guide. Thermometer User Guide. Internet: abc instruments international FLT5A Thermometer Land Instruments International Dronfield, S18 1DJ England Telephone: (1246) 417691 Facsimile: (1246) 41585 Email: infrared.sales@landinst.com Internet: www.landinst.com

More information

Richter Optica. Instructions for Model: S850 Stereo Zoom Microscope

Richter Optica. Instructions for Model: S850 Stereo Zoom Microscope Richter Optica info@richter-optica.com Instructions for Model: S850 Stereo Zoom Microscope Microscope Head Focus Knob Stage Clips Zoom Knob C-Mount Adapter Eyepiece Focusing Holder Focusing Holder Set

More information

Operating instructions Vortex flow meter. SVxxx / / 2015

Operating instructions Vortex flow meter. SVxxx / / 2015 Operating instructions Vortex flow meter SVxxx0 80229859 / 00 06 / 2015 Contents 1 Safety instructions...3 2 Functions and features...3 3 Function...4 4 Installation...4 5 Electrical connection...6 6 Operating

More information

This chip is used for: power module BSM 75GD120DN2. Emitter pad size 8 x ( 2.99 x 1.97 ) Thickness 200 µm. Wafer size 150 mm

This chip is used for: power module BSM 75GD120DN2. Emitter pad size 8 x ( 2.99 x 1.97 ) Thickness 200 µm. Wafer size 150 mm IGBT Chip in NPT-technology Features: 1200V NPT technology low turn-off losses short tail current positive temperature coefficient easy paralleling integrated gate resistor This chip is used for: power

More information

5SJ4...-.HG Circuit Breakers to IEC and UL 489

5SJ4...-.HG Circuit Breakers to IEC and UL 489 Siemens AG 009 5SJ...-.HG Circuit Breakers to IEC and UL 89 BETA Low-Voltage Circuit Protection Compliance with industry standards is a must in today's manufacturing environment. Worldwide acceptance is

More information

Chip tantalum capacitors (Fail-safe open structure type)

Chip tantalum capacitors (Fail-safe open structure type) TCFG1C6M8R Chip tantalum capacitors (Fail-safe open structure type) TCFG Series Case Features 1) Safety design by open function built - in. 2) Wide capacitance range 3) Screening by thermal shock. Dimensions

More information

FL ballasts Electronic fixed output. PC TC PRO sr 1/2x11 42 W PC PRO compact

FL ballasts Electronic fixed output. PC TC PRO sr 1/2x11 42 W PC PRO compact FL ballasts EL HE PC TC PRO sr 1/2x11 42 W PC PRO compact Product description CELMA Energy Efficiency Index A2 BAT / A2 T Nominal life-time up to 50,000 h (at ta 50 C with a failure rate max. 0.2 % per

More information

PUSH TUBE STANDARD DUTY

PUSH TUBE STANDARD DUTY PUSH TUBE STANDARD DUTY ASSEMBLY / OWNER S MANUAL Part No: 15-0070 PUR223 Rev. 00 OPERATING INSTRUCTIONS Congratulations! You ve just purchased the most durable plow component in the industry. Cycle Country

More information

State Unitary Enterprise Production Amalgamation Novosibirsk Instrument-Making Plant PN-6K. Servise Manual

State Unitary Enterprise Production Amalgamation Novosibirsk Instrument-Making Plant PN-6K. Servise Manual State Unitary Enterprise Production Amalgamation Novosibirsk Instrument-Making Plant Night Sight PN-6K Servise Manual Contents 1. General directions 4 2. Specifications 5 3. Delivery set 6 4. Safety regulations

More information

User Manual VX4750 Function Generator Module

User Manual VX4750 Function Generator Module User Manual VX4750 Function Generator Module 070-9151-05 This document applies for firmware version 2.60 and above. Copyright Tektronix, Inc. All rights reserved. Tektronix products are covered by U.S.

More information

ASSEMBLY / OWNER S MANUAL

ASSEMBLY / OWNER S MANUAL ATV PLOW MOUNT For Yamaha ATVs ASSEMBLY / OWNER S MANUAL Part No: 15-5590 MAN0050 Rev. 01 OPERATING INSTRUCTIONS Congratulations! You ve just purchased the most durable plow component in the industry.

More information

Panel Mount, Single Phase 120 and 240 Volt Fixed Shaft (click blue text for more details)

Panel Mount, Single Phase 120 and 240 Volt Fixed Shaft (click blue text for more details) Staco Energy Products Co. has been a leading manufacturer of variable transformers for over 60 years, building standard as well as custom-designed products for industrial, commercial and military applications.

More information

SkyScan EWS-PRO - Manual -

SkyScan EWS-PRO - Manual - INTRODUCTION SkyScan EWS-PRO - Manual - EWS-Pro gives you advance weather warning technology you can use at home, indoors or out, and take wherever you go, for any kind of outdoor activity. Your EWS-Pro

More information

KM-70 Panel-mounting Thermostat

KM-70 Panel-mounting Thermostat KM-70 Panel-mounting Thermostat B 60.2045.0 Operating Instructions 2008-10-24/00073778 Please read these Operating Instructions before commissioning the instrument. Keep the manual in a place that is accessible

More information

What You Need to Get Started INSTALLATION GUIDE

What You Need to Get Started INSTALLATION GUIDE INSTALLATION GUIDE SBS-96F SHIELDED BACKSHELL This guide describes how to assemble and install the SBS-96F shielded backshell with low-voltage SCXI modules, VXI-DAQ modules, or low-voltage TBX terminal

More information

Melton Series. Owners Manual. Lab Centrifuge. Model # s A C, A C, B C, B C, C C, C C, D C, D C

Melton Series. Owners Manual. Lab Centrifuge. Model # s A C, A C, B C, B C, C C, C C, D C, D C Melton Series Owners Manual Lab Centrifuge Model # s A-4-115-C, A-4-220-C, B-4-115-C, B-4-220-C, C-4-115-C, C-4-220-C, D-4-115-C, D-4-220-C Serial Numbers 85500 & Above NOTICE Wire this centrifuge according

More information

RAYTECH USA, Inc. 90C Randall Avenue, Woodlyn, PA USA Tel Fax Instruction Manual

RAYTECH USA, Inc. 90C Randall Avenue, Woodlyn, PA USA Tel Fax Instruction Manual RAYTECH USA, Inc. 90C Randall Avenue, Woodlyn, PA 19094 USA Tel. 610 833 3016 Fax. 610 833 3018 Instruction Manual 50 Amp / 3 Channel Winding Resistance Meter Model: WR50-13 Preliminary Instruction Manual

More information

VX25 Enclosure System. Technical documentation PE conductor connection, current carrying capacity

VX25 Enclosure System. Technical documentation PE conductor connection, current carrying capacity VX Enclosure System Technical documentation PE conductor connection, current carrying capacity Enclosure system VX Contents Contents. General remarks. Introduction. Notes on the design of the earthing

More information

FOR CAN-AM ATV s P/N ASSEMBLY / OWNERS MANUAL

FOR CAN-AM ATV s P/N ASSEMBLY / OWNERS MANUAL MID-MOUNT KIT FOR CAN-AM ATV s P/N 15-7580 ASSEMBLY / OWNERS MANUAL Application PLOW PUSH FRAME NO. 15-0070, 33-0000 or 33-0070 Before you begin, please read these instructions and check to be sure all

More information

Operating instructions Magnetic-inductive flow meter SM6x04 SM7x04 SM8x04

Operating instructions Magnetic-inductive flow meter SM6x04 SM7x04 SM8x04 Operating instructions Magnetic-inductive flow meter SM6x04 SM7x04 SM8x04 UK 80223776 / 00 11 / 2018 Contents 1 Preliminary note...3 2 Safety instructions...4 3 Functions and features...4 4 Function...5

More information

Solenoid valve Types CSV 2 - CSV 22 (NC) and solenoid coil

Solenoid valve Types CSV 2 - CSV 22 (NC) and solenoid coil Data sheet Solenoid valve s CSV 2 - CSV 22 (NC) and solenoid coil CSV is a direct or servo-operated solenoid valve for liquid, suction, and hot gas lines with fluorinated refrigerants. CSV valves are for

More information

Non-Contact Safety Systems CMS

Non-Contact Safety Systems CMS Selection table for non-contact safety system // Evaluation units Connection Desi Read head contact assembly Assured switch-on distance S ao [mm] Assured switch-on distance S ar [mm] Number of outputs

More information

HACCP Concept. Overview of HACCP Principles. HACCP Principles. Preliminary Tasks Development of the HACCP Plan

HACCP Concept. Overview of HACCP Principles. HACCP Principles. Preliminary Tasks Development of the HACCP Plan HACCP Concept Overview of HACCP Principles A systematic approach to be used in food production as a means to assure food safety. National Advisory Committee on Microbiological Criteria for Foods (NACMCF)

More information

QUANTUM CONCEPT. Swimming User s Manual

QUANTUM CONCEPT. Swimming User s Manual QUANTUM CONCEPT Swimming User s Manual 480.508.0 Version.4 Edition July 05 Documentation Updates Swiss Timing Ltd. reserves the right to make improvements in the products described in this documentation

More information

Overview of HACCP Principles. OFFICE OF THE TEXAS STATE CHEMIST Texas Feed and Fertilizer Control Service Agriculture Analytical Service

Overview of HACCP Principles. OFFICE OF THE TEXAS STATE CHEMIST Texas Feed and Fertilizer Control Service Agriculture Analytical Service Overview of HACCP Principles OFFICE OF THE TEXAS STATE CHEMIST Texas Feed and Fertilizer Control Service Agriculture Analytical Service OFFICE OF THE TEXAS STATE CHEMIST 2 HACCP Concept A systematic approach

More information

TPM(A) Quick Startup Guide SIEMENS SINAMICS S120

TPM(A) Quick Startup Guide SIEMENS SINAMICS S120 Quick Startup Guide TPM(A) 00 110 SIEMENS SINAMICS S120 Version : 1.2 Date : 1 th December 200 File : 091_D012_0.doc Doc.No. : 091-D012-0 Technical changes reserved! Table of Contents TABLE OF CONTENTS...

More information

CHEMICAL MANAGEMENT PROGRAM

CHEMICAL MANAGEMENT PROGRAM 1 ALBUQUERQUE PUBLIC SCHOOLS RISK MANAGEMENT DEPARTMENT CHEMICAL MANAGEMENT PROGRAM TABLE OF CONTENTS TABLE OF CONTENTS...2 I. PURPOSE...3 II. SCOPE AND APPLICATION...3 III. DEFINITIONS...4 IV. INVENTORIES...5

More information

Alternating Current (AC): Alternating Current is electric current that reverses directions at regular intervals.

Alternating Current (AC): Alternating Current is electric current that reverses directions at regular intervals. Glossary Alternating Current (AC): Alternating Current is electric current that reverses directions at regular intervals. American National Standards Institute (ANSI): American National Standards Institute

More information

ISEmax CAM40/CAS40. Technical Information

ISEmax CAM40/CAS40. Technical Information Technical Information Online measurement of nutrient parameters Ion-selective electrode system for the continuous measurement of ammonium and nitrate Application The ion-selective electrode system works

More information

Product Manual (Revision D) Original Instructions. Speed Switch and Integrated Speed Switch. Installation and Operation Manual

Product Manual (Revision D) Original Instructions. Speed Switch and Integrated Speed Switch. Installation and Operation Manual Product Manual 82310 (Revision D) Original Instructions Speed Switch and Integrated Speed Switch Installation and Operation Manual General Precautions Read this entire manual and all other publications

More information

product manual H-3220A Benkelman Beam

product manual H-3220A Benkelman Beam 05.12 product manual H-3220A Benkelman Beam General The H-3220A Benkelman Beam Apparatus is a convenient and accurate device used for measuring the deflection of flexible pavements under moving wheel

More information

ATV WP2 FRONT MOUNT PUSH TUBE

ATV WP2 FRONT MOUNT PUSH TUBE ATV WP2 FRONT MOUNT PUSH TUBE ASSEMBLY / OWNER S MANUAL Part No: 16-0000 MAN0352 Rev. 00 OPERATING INSTRUCTIONS Congratulations! You ve just purchased the most durable plow component in the industry. Cycle

More information

2.12. Ex-Linear light fittings for fluorescent lamps - max. ambient temperature + 60 C - nllk W - 58 W for Zone 2 and 22

2.12. Ex-Linear light fittings for fluorescent lamps - max. ambient temperature + 60 C - nllk W - 58 W for Zone 2 and 22 .1 Ex-Linear light fittings for fluorescent lamps - max. ambient temperature + C - nllk 09 18 W - 58 W for Zone and The lighting solution for high temperatures up to C The linear luminaires series nllk

More information

Kingspan Smart-Lite Kite Luminaire

Kingspan Smart-Lite Kite Luminaire Kingspan Smart-Lite Kite Luminaire The Kite High Bay products are designed to complement the ZEL (Zero Energy Lighting) initiative championed by Kingspan. The combination of pressure die-cast aluminium

More information

Power Resistor Thick Film Technology

Power Resistor Thick Film Technology Power Resistor Thick Film Technology LTO series are the extension of RTO types. We used the direct ceramic mounting design (no metal tab) of our RCH power resistors applied to semiconductor packages. FEATURES

More information

METALLIZED POLYPROPYLENE AC FILTERING CAPACITORS

METALLIZED POLYPROPYLENE AC FILTERING CAPACITORS METALLIZED POLYPROPYLENE AC FILTERING CAPACITORS Technology looking ahead With the new LNF series a new level of safety for the AC capacitors has been reached: Active safety: When the capacitor is stressed

More information

/2 way valves (solenoid actuated diaphragm with forced lifting) 1/4... 2

/2 way valves (solenoid actuated diaphragm with forced lifting) 1/4... 2 / way valves (solenoid actuated diaphragm with forced lifting) /4... Damped operation Operation without differential Suitable for vacuum igh flow rate For systems with low or fluctuating Brass body Wide

More information

TA7262P,TA7262P(LB),TA7262F

TA7262P,TA7262P(LB),TA7262F TOSHIBA BIPOLAR LINEAR INTEGRATED CIRCUIT SILICON MONOLITHIC TA7262P,TA7262P(LB),TA7262F DC MOTOR DRIVER (3 PHASE Bi DIRECTIONAL) The TA7262P / P (LB) / F are 3 Phase Bi Directional supply voltage control

More information

WeatherHub2 Quick Start Guide

WeatherHub2 Quick Start Guide WeatherHub2 Quick Start Guide Table of Contents 1 Introduction... 1 2 Packing List... 1 3 Connections... 1 4 IP Addressing... 2 5 Browser Access... 3 6 System Info... 3 7 Weather Station Settings... 4

More information

INSTALLATION INSTRUCTIONS ATV Plow Blade Part Number: (50 ), (54 ), or (60 ) Application: All Terrain Vehicles

INSTALLATION INSTRUCTIONS ATV Plow Blade Part Number: (50 ), (54 ), or (60 ) Application: All Terrain Vehicles INSTALLATION INSTRUCTIONS ATV Plow Blade Part Number: 78950 (50 ), 78954 (54 ), or 78960 (60 ) Application: All Terrain Vehicles Your safety, and the safety of others, is very important. To help you make

More information

Health, Safety, Security and Environment

Health, Safety, Security and Environment Document owner and change code Document Owner Aaron Perronne Title HSSE Manager Mark X Change Code Description X N/A First Issue A Typographical/Grammatical correction; formatting change; text clarification-no

More information

FrelTec GmbH. Thick Film Chip Resistor SMD Low Ohm

FrelTec GmbH. Thick Film Chip Resistor SMD Low Ohm GmbH Mathildenstr. 10A 82319 Starnberg Germany Thick Film Chip Resistor SMD Low Ohm 9/10/2012 1/13 GmbH www.freltec.com SPECIFICATION Part Number 016 05 * 001k * J * T05 ** *** Type Size Value Tolerance

More information

Meteorological Station P03/3-RS485-WAGO

Meteorological Station P03/3-RS485-WAGO Meteorological Station P03/3-RS485-WAGO Technical data and notes for installation Elsner Elektronik GmbH Control and Automation Engineering Herdweg 7 D-75391 Gechingen Germany Phone: +49 (0) 70 56/93 97-0

More information

FrelTec GmbH. Multilayer Chip Ferrite Bead SMD

FrelTec GmbH. Multilayer Chip Ferrite Bead SMD GmbH Mathildenstr. 10A 82319 Starnberg Germany SMD 3/21/2017 1/12 GmbH www.freltec.com SPECIFICATION Part Number 198 05 * 151 * S * Q * E02 Type Size Nominal Impedance Material Rated Current Tolera nce

More information

Maintenance/ Discontinued

Maintenance/ Discontinued ICs for Compact Disc/CD-ROM Player AN8783SB 4-channel linear driver IC for CD/CD-ROM drive Overview The AN8783SB employs one channel of power op-amp. system and three channels of H-bridge system. Two channels

More information

SPECIFICATION SHEET : FHS2-UNV-36L

SPECIFICATION SHEET : FHS2-UNV-36L SPECIFICATION SHEET : FHS2-UNV-36L This Is An Original Product From Fulham Co., Inc Description : Emergency LED Driver For Back-up Lighting This driver will operate constant current LED arrays with a working

More information

2 nd Generation thinq! TM SiC Schottky Diode

2 nd Generation thinq! TM SiC Schottky Diode IDH12S6C 2 nd Generation thinq! TM SiC Schottky Diode Features Revolutionary semiconductor material - Silicon Carbide Switching behavior benchmark No reverse recovery/ No forward recovery Product Summary

More information

2 nd Generation thinq! TM SiC Schottky Diode

2 nd Generation thinq! TM SiC Schottky Diode IDH8S6C 2 nd Generation thinq! TM SiC Schottky Diode Features Revolutionary semiconductor material - Silicon Carbide Switching behavior benchmark No reverse recovery/ No forward recovery Product Summary

More information

5 V/10 V Low Drop Voltage Regulator TLE 4266

5 V/10 V Low Drop Voltage Regulator TLE 4266 5 /1 Low Drop oltage Regulator TLE 266 Features Output voltage 5 or 1 Output voltage tolerance ±2% 12 ma current capability ery low current consumption Low-drop voltage Overtemperature protection Reverse

More information

BINOCULAR STEREOSCOPIC MICROSCOPE MBS-10. User Manual

BINOCULAR STEREOSCOPIC MICROSCOPE MBS-10. User Manual BINOCULAR STEREOSCOPIC MICROSCOPE MBS-10 User Manual ATTENTION! Мicroscope design may differ somewhat from description in this manual. 2 1 - PURPOSE The MBS-10 microscope is intended for observing both

More information

Low Drop Voltage Regulator TLE 4295

Low Drop Voltage Regulator TLE 4295 Low Drop Voltage Regulator TLE 4295 Features Four versions: 2.6 V, 3.0 V, 3.3 V, 5.0 V tolerance ±4% Very low drop voltage Output current: 30 ma Power fail output Low quiescent current consumption Wide

More information

Surface Mount Multilayer Ceramic Chip Capacitors for Safety Certified Applications

Surface Mount Multilayer Ceramic Chip Capacitors for Safety Certified Applications Surface Mount Multilayer Ceramic Chip Capacitors for Safety Certified Applications FEATURES Approved IEC 60384-14 Specialty: safety certified capacitors Wet build process Reliable Noble Metal Electrode

More information

SK Series BOX PLOW INSTALLATION & OWNER S MANUAL TABLE OF CONTENTS

SK Series BOX PLOW INSTALLATION & OWNER S MANUAL TABLE OF CONTENTS SK Series BOX PLOW INSTALLATION & OWNER S MANUAL TABLE OF CONTENTS SAFETY... 2 INTRODUCTIONS... 5 TIPS ON PLOWING SNOW... 6 BOX PLOW ASSEMBLY PROCEDURE... 7 BOX PLOW BLADE ASSEMBLY DRAWING AND PARTS LIST...

More information

FG Silicon N-channel MOS FET (FET1) Silicon P-channel MOS FET (FET2) For switching circuits. Package. Overview. Features. Marking Symbol: V7

FG Silicon N-channel MOS FET (FET1) Silicon P-channel MOS FET (FET2) For switching circuits. Package. Overview. Features. Marking Symbol: V7 FG6943 Silicon N-channel MOS FET (FET) Silicon P-channel MOS FET (FET2) For switching circuits Overview FG6943 is N-P channel dual type small signal MOS FET employed small size surface mounting package.

More information

Eppendorf UVette. Instructions for use

Eppendorf UVette. Instructions for use Instructions for use Instructions Eppendorf see Fig. Tab. p. p. UVette for use Copyright 2014 Eppendorf AG, Hamburg, Germany. All rights reserved, including graphics and images. No part of this publication

More information

Maintenance/ Discontinued

Maintenance/ Discontinued oltage Regulators N7xx/N7xxF Series 3-pin positive output voltage regulator ( type) Overview The N7xx series and the N7xxF series are 3- pin, fixed positive output type monolithic voltage regulators. Stabilized

More information