Control and signalling units Ø 22

Transcription

1 Separate components and accessories : electrical blocks References Contact blocks with screw clamp terminal connections (1) Description Type of contact Sold in Unit Weight lots of reference ZBE-101 N/O N/C Standard single 1 5 ZBE contact block 1 5 ZBE ZBE-10 Standard double 5 ZBE contact block 5 ZBE ZBE ZBE ZBE-04 Special contacts 1 5 ZBE (for low power switching and dust protected) cannot be fitted with supplementary contact blocks 1 5 ZBE Body/fixing collar ZB5-AZ009 For use Sold in Unit Weight with lots of reference Electrical blocks (contact or light) 10 ZB5-AZ Clip-on legend holders for electrical blocks with screw clamp terminal connections ZBZ-001 Identification of 10 ZBZ an XB5-A control or signalling unit Sheet of 50 blank legends Legend holder ZBZ ZBY SIS labelling software (for legends ZBY-001) Legend design 1 XBY-1EN (English version) Legend design 1 XBY-1FR (French version) XBY-1ii /40 Te Legend design 1 XBY-1GE (German version) (1) The contact blocks enable variable composition of body sub-assemblies and can be stacked to 3 rows, either : 3 rows of 3 single contacts or 1 row of 3 double contacts + 1 row of 3 single contacts (double contact blocks occupy rows).

2 Separate components and accessories : electrical blocks ZBV-Bi Light blocks with screw clamp terminal connections Description Supply Colour of Sold in Unit Weight voltage light source lots of reference V Integral LED z 4 White 5 ZBV-B Green 5 ZBV-B Red 5 ZBV-B Yellow 5 ZBV-B Blue 5 ZBV-B c White 5 ZBV-G Green 5 ZBV-G Red 5 ZBV-G Yellow 5 ZBV-G Blue 5 ZBV-G c White 5 ZBV-M Green 5 ZBV-M Red 5 ZBV-M Yellow 5 ZBV-M Blue 5 ZBV-M Direct 50 5 ZBV supply for BA 9s.4 W max. bulb Not included (1) Body/fixing collar For use Sold in Unit Weight with lots of reference Electrical block (contact or light) 10 ZB5-AZ ZB5-AZ009 Clip-on legend holders for electrical blocks with screw clamp terminal connections Identification of 10 ZBZ an XB5-A control or signalling unit ZBZ-001 Sheet of 50 blank legends Legend holder ZBZ ZBY SIS labelling software (for legends ZBY-001) Legend design 1 XBY-1EN (English version) XBY-1ii Legend design 1 XBY-1FR (French version) Legend design 1 XBY-1GE (German version) (1) Bulb to be ordered separately : see page /5. Te /41

3 Separate components and accessories : electrical blocks Contact blocks for plug-in connector Description Type of contact Sold in Unit Weight lots of reference N/C N/O Standard contacts 1 5 ZBE ZBE ZBE Light blocks for plug-in connector ZBE-104 Description Supply Colour of Sold in Unit Weight voltage light source lots of reference V Integral LED z 4 White 5 ZBV-B Green 5 ZBV-B Red 5 ZBV-B Yellow 5 ZBV-B Blue 5 ZBV-B c White 5 ZBV-G ZBV-Bi4 Green 5 ZBV-G Red 5 ZBV-G Yellow 5 ZBV-G Blue 5 ZBV-G c White 5 ZBV-M Green 5 ZBV-M Red 5 ZBV-M Yellow 5 ZBV-M APE-1C50 Blue 5 ZBV-M Connecting cables and connector Description Number of Wire Length Sold in Unit Weight connectors c.s.a. lots of reference mm mm APE-1PAD1 Cables with 1 0, APE-1C150 0,10 connector -pin, 5.08 mm 0, APE-1C50 0,180 Self-stripping 16 APE-1PAD1 0,080 connector Body/fixing collar ZB5-AZ009 For use Sold in Unit Weight with lots of reference Electrical block (contact or light) 10 ZB5-AZ /4 Te

4 Separate components and accessories : electrical blocks Contact block for printed circuit board connection (1) Description Type of contact Sold in Unit Weight lots of reference ZBE-701 N/O N/C Standard contacts 1 10 ZBE ZBE ZBE-70 Special contacts 1 10 ZBE (for low power switching and dust protected) 1 10 ZBE ZBV-Bi7 Light blocks for printed circuit board connection (1) Description Supply Colour Sold in Unit Weight voltage of LED lots of reference V Integral LED z 4 White 5 ZBV-B Green 5 ZBV-B (for heads with integral LED, see page /31) Red 5 ZBV-B Yellow 5 ZBV-B Blue 5 ZBV-B ZB5-AZ009 Body/fixing collar For use Sold in Unit Weight with lots of reference Electrical block (contact or light) 10 ZB5-AZ ZB5-AZ079 ZBZ-010 Accessories specifically for printed circuit board mounting Description Application Sold in Unit Weight lots of reference Fixing collar/pillar Printed circuit 10 ZB5-AZ board support Adaptor Electrical blocks 10 ZBZ (socket) (contact or light) Fixing screw Direct mounting of 10 ZBZ for printed circuit electrical blocks board on fixing collar/pillar ZB5-AZ079 Mounting electrical blocks 10 ZBZ with adaptor ZBZ-010 (1) For details of support drilling and printed circuit board : See page /63. Te /43

5 Separate components and accessories : for heads References Can be used with XAL control stations, see pages 3/6 to 3/11. ZBA-i Pushbutton caps - unmarked For use Type of Colour Sold in Unit Weight with pushbutton lots of reference ZB5-AA0 Flush White 10 ZBA circular Black 10 ZBA pushbutton Green 10 ZBA heads supplied Red 10 ZBA without cap Yellow 10 ZBA Blue 10 ZBA colours (1) 1 ZBA ZBL-i Projecting White 10 ZBL Black 10 ZBL Green 10 ZBL Red 10 ZBL Yellow 10 ZBL Blue 10 ZBL colours (1) 1 ZBL ZBA-i33 Pushbutton caps - marked (sold in lots of 10) For use Type Marking Colour Unit Weight with of push Text Colour of cap reference ZB5-AA0 Flush I () White Green ZBA circular Black White ZBA pushbutton heads supplied II White Green ZBA without cap Black White ZBA III White Green ZBA Black White ZBA IV White Green ZBA Black White ZBA START () White Green ZBA Black White ZBA ON White Green ZBA Black White ZBA MARCHE White Green ZBA Black White ZBA UP() Black White ZBA DOWN () White Black ZBA () White Green ZBA-345 0,001!(3) Black White ZBA-334 () White Black ZBA-335 () O () White Red ZBA Black ZBA ARRET White Red ZBA Black ZBA STOP () White Red ZBA Black ZBA OFF White Red ZBA Black ZBA R () White Blue ZBA (1) Set of 6 different coloured caps : white, black, green, red, yellow, blue. () Double injection moulded marking. (3) Cap supplied not clipped-in, allowing orientation of arrow in 4 directions :!, à, x or v. /44 Te

6 Separate components and accessories : for heads Can be used with XAL control stations, see pages 3/6 to 3/11. ZBZ-3 ZBY-i101 Standard (30 x 40 mm) legend holders for 8 x 7 mm legends (1) Description Legend Sold Unit Weight Colour Marking in reference lots of Without 10 ZBZ legend With blank Black or red 10 ZBY legend bacround (for engraving) White or 10 ZBY yellow bacround With 8 x 7 mm Black or red O (black bacround) 1 ZBY international bacround language O (red bacround) 1 ZBY marked legend I 1 ZBY II 1 ZBY O-I 1 ZBY I-II 1 ZBY I-O-II 1 ZBY AUTO 1 ZBY STOP 1 ZBY ZBY-303 With 8 x 7 mm Black or red AUTO-HAND 1 ZBY English bacround language () AUTO-O-HAND 1 ZBY marked legend CLOSE 1 ZBY DOWN 1 ZBY EMERGENCY STOP 1 ZBY FAST 1 ZBY FORWARD 1 ZBY HAND 1 ZBY HAND-OFF-AUTO 1 ZBY INCH 1 ZBY LEFT 1 ZBY OFF 1 ZBY OFF-ON 1 ZBY ON 1 ZBY OPEN 1 ZBY POWER ON 1 ZBY RESET (red bacround) 1 ZBY RESET (black bacround) 1 ZBY REVERSE 1 ZBY RIGHT 1 ZBY RUN 1 ZBY SLOW 1 ZBY START 1 ZBY STOP-START 1 ZBY UP 1 ZBY (1) Legends, see pages /47 to /49. () Start functions : white letters on black bacround. Stop functions : white letters on red bacround (unless otherwise specified above). Te /45

7 Separate components and accessories : for heads Can be used with XAL control stations, see pages 3/6 to 3/11. ZBY-107 ZBY-8 /46 Te Standard (30 x 40 mm) legend holders for 8 x 7 mm legends (continued) Description Legend Reference Weight Colour Marking With French Black or red ARRET (red bacround) ZBY language bacround ARRET (black bacround) ZBY marked legend (1) ARRET GENERAL ZBY ARRET REARMEMENT ZBY ARRET D'URGENCE ZBY ARRET-MARCHE ZBY ARRIERE ZBY AUTO CYCLE-CYCLE ZBY AUTO CYCLE-MAIN ZBY AUTO-MAIN ZBY AUTO-O-MAIN ZBY AVANT ZBY AVANT-O-ARRIERE ZBY C-P-C-NORMAL ZBY CYCLE-MAIN ZBY DECLENCHEMENT ZBY DEFAUT (black bacround) ZBY DEFAUT (red bacround) ZBY DEPART CYCLE ZBY DESCENTE ZBY DROITE ZBY ENCLENCHEMENT ZBY EN SERVICE ZBY FERMETURE ZBY GAUCHE ZBY HORS SERVICE ZBY HORS-EN ZBY LENT ZBY MAIN ZBY MARCHE ZBY MONTEE ZBY OUVERTURE ZBY PHASE / PHASE ZBY REARMEMENT (red bacround) ZBY REARMEMENT (black bacround) ZBY SOUS TENSION ZBY VITE ZBY With German Black or red AB ZBY language bacround AUF ZBY marked legend (1) AUS ZBY AUS-EIN ZBY AUS-IN BETRIEB ZBY AUS-RUCKSTELLUNG ZBY AUSSCHALTEN ZBY AUTO-HAND ZBY AUTO-O-HAND ZBY AUTOZYKL-HAND ZBY AUTOZYKL- 1 ZYKL ZBY C-P-C-NORMAL ZBY EIN ZBY EINSCHALTEN ZBY HAND ZBY LANGSAM ZBY LINKS ZBY NOT-AUS (red bacround) ZBY NOT-AUS (yellow bacround) ZBY NOT-HALT ZBY ÖFFNEN ZBY RECHTS ZBY RUCKSTELLUNG ZBY SCHLIESSEN ZBY SCHNELL ZBY SPANNUNG EIN ZBY STEUERUNG AUS ZBY STEUERUNG EIN ZBY STORUNG (black bacround) ZBY STORUNG (red bacround) ZBY VOR ZBY VOR-O-ZURUCK ZBY ZURUCK ZBY ZYKLUS-HAND ZBY ZYRLUSSTART ZBY (1) Start functions : white letters on black bacround. Stop functions : white letters on red bacround (unless otherwise specified above).

8 Separate components and accessories : for heads Can be used with XAL control stations, see pages 3/6 to 3/11. Flush mounting with bezel legend holders (30 x 40 mm) for 8 x 7 mm legends Description For use with Colour Sold in Unit Weight lots of Reference Without legend Circular heads 10 ZBZ Square heads 10 ZBC-Z ZBZ-34 ZBY-iH101 With blank Circular heads Black or red bacround 10 ZBY-H legend White or yellow bacround 10 ZBY-4H Square heads Black or red bacround 10 ZBC-YH White or yellow bacround 10 ZBC-Y4H Standard (30 x 50 mm) legend holders for 18 x 7 mm legends Description For use with Colour Sold in Unit Weight lots of Reference` Without legend Circular and 10 ZBZ square heads ZBZ-33 ZBY-610i With blank Circular and Black or red bacround 10 ZBY legend square heads White or yellow bacround 10 ZBY Flush mounting with bezel legend holders (30 x 50 mm) for 18 x 7 mm legends Description For use with Colour Sold in Unit Weight lots of Reference` Without legend Circular heads 10 ZBZ Square heads 10 ZBC-Z ZBZ-35 ZBY-6H10i With blank Circular heads Black or red bacround 10 ZBY-6H legend White or yellow bacround 10 ZBY-6H Square heads Black or red bacround 10 ZBC-Y6H White or yellow bacround 10 ZBC-Y6H Legends for engraving Description For use with Colour Sold in Unit Weight lots of Reference mm 8 x 7 30 x 40 mm Black or red bacround 10 ZBY legend holders White or yellow bacround 10 ZBY x 7 30 x 50 mm Black or red bacround 10 ZBY legend holders White or yellow bacround 10 ZBY Sheets of peel-off legends (with backing board and protective transparent cover) Description For use with Sold in Unit Weight lots of Reference Sheet of x 40 mm legend holders 10 ZBY x 7 mm ZBZ-3 and ZBZ-34 legends Sheet of x 50 mm legend holders 10 ZBY x 7 mm ZBZ-33 and ZBZ-35 legends SIS labelling software Application Reference Weight XBY-1ii Legend design (English version) XBY-1EN Legend design (French version) XBY-1FR Legend design (German version) XBY-1GE Te /47

9 Separate components and accessories : for heads Can be used with XAL control station, see pages 3/6 to 3/11. 8 x 7 mm marked legends (for 30 x 40 mm legend holders ZBZ-3 and ZBZ-34) Colour Marking Reference Weight ZBY-0178 Black or red International O (black bacround) ZBY bacround (1) O (red bacround) ZBY I ZBY II ZBY O-I ZBY I-II ZBY I-O-II ZBY AUTO ZBY STOP ZBY ZBY-0303 English AUTO-HAND ZBY AUTO-O-HAND ZBY CLOSE ZBY DOWN ZBY EMERGENCY STOP ZBY FAST ZBY FORWARD ZBY HAND ZBY HAND-OFF-AUTO ZBY INCH ZBY LEFT ZBY OFF ZBY OFF-ON ZBY ON ZBY OPEN ZBY POWER ON ZBY RESET (red bacround) ZBY RESET (black bacround) ZBY REVERSE ZBY RIGHT ZBY RUN ZBY SLOW ZBY START ZBY START-STOP ZBY UP ZBY ZBY-0i104 French ARRET (red bacround) ZBY ARRET (black bacround) ZBY ARRET GENERAL ZBY ARRET REARMEMENT ZBY ARRET D'URGENCE ZBY ARRET-MARCHE ZBY ARRIERE ZBY AUTO CYCLE-CYCLE ZBY AUTO CYCLE-MAIN ZBY AUTO-MAIN ZBY AUTO-O-MAIN ZBY AVANT ZBY AVANT-O-ARRIERE ZBY C-P-C-NORMAL ZBY CYCLE-MAIN ZBY DECLENCHEMENT ZBY DEFAUT (black bacround) ZBY DEFAUT (red bacround) ZBY DEPART CYCLE ZBY DESCENTE ZBY DROITE ZBY (1) Start functions : white letters on black bacround. Stop functions : white letters on red bacround (unless otherwise specified above). /48 Te

10 Separate components and accessories : for heads Can be used with XAL control stations, see pages 3/6 to 3/11. 8 x 7 mm marked legends (for 30 x 40 mm legend holders ZBZ-3 and ZBZ-34) (continued) Colour Marking Reference Weight Black or red French ENCLENCHEMENT ZBY bacround (1) (continued) EN SERVICE ZBY FERMETURE ZBY GAUCHE ZBY HORS SERVICE ZBY HORS-EN ZBY LENT ZBY MAIN ZBY MARCHE ZBY MONTEE ZBY OUVERTURE ZBY PHASE / PHASE ZBY REARMEMENT (red bacround) ZBY REARMEMENT (black b/grnd.) ZBY SOUS TENSION ZBY VITE ZBY ZBY-08 German AB ZBY AUF ZBY AUS ZBY AUS-EIN ZBY AUS-IN BETRIEB ZBY AUS-RUCKSTELLUNG ZBY AUSSCHALLEN ZBY AUTO-HAND ZBY AUTO-O-HAND ZBY AUTOZYKL-HAND ZBY AUTOZYKL- 1 ZYKL ZBY C-P-C-NORMAL ZBY EIN ZBY EINSCHALTEN ZBY HAND ZBY LANGSAM ZBY LINKS ZBY NOT-AUS (red bacround) ZBY NOT-AUS (yellow bacround) ZBY NOT-HALT ZBY ÖFFNEN ZBY RECHTS ZBY RUCKSTELLUNG ZBY SCHLIESSEN ZBY SCHNELL ZBY SPANNUNG EIN ZBY STEUERUNG AUS ZBY STEUERUNG EIN ZBY STORUNG (black bacround) ZBY STORUNG (red bacround) ZBY VOR ZBY VOR-O-ZURUCK ZBY ZURUCK ZBY ZYKLUS-HAND ZBY ZYRLUSSTART ZBY (1) Start functions : white letters on black bacround. Stop functions : white letters on red bacround (unless otherwise specified above). Te /49

11 Separate components and accessories : for heads Sheets of legends for pushbuttons, switches and pilot lights XB5-A (1) Description Marking Sold in Unit Weight lots of Reference Sheet of 66 Without 10 ZBY circular peel-off transparent International O 10 ZBY self-adhesive legends I 10 ZBY II 10 ZBY III 10 ZBY AUTO 10 ZBY ZBY-1101 STOP 10 ZBY ! 10 ZBY English HAND 10 ZBY OFF 10 ZBY ON 10 ZBY START 10 ZBY French ARRET 10 ZBY ARRIERE 10 ZBY AVANT 10 ZBY DESCENTE 10 ZBY MAIN 10 ZBY MARCHE 10 ZBY MONTEE 10 ZBY German AB 10 ZBY AUF 10 ZBY AUS 10 ZBY EIN 10 ZBY Sheet of 66 Without 10 ZBC-Y square peel-off transparent self-adhesive legends Circular legends for Emergency stop mushroom heads (yellow or white bacround) ZBY-i330 Diameter Marking, on Reference Weight yellow bacround mm 60 Without ZBY EMERGENCY STOP ZBY ARRET D'URGENCE ZBY NOT-AUS ZBY ARRESTO EMERGENZA ZBY NODSTOP ZBY Without ZBY EMERGENCY STOP ZBY ARRET D'URGENCE ZBY NOT-AUS ZBY ARRESTO EMERGENZA ZBY PARADA DE EMERGENCIA ZBY (1) Can be used with XAL control stations, see pages 3/6 to 3/11. /50 Te

12 Separate components and accessories References Accessories Description Application Sold in Unit Weight lots of reference Cable ducting Fixes beneath head 10 AF1-XA support AF1-XA1 M5 x 10 screw Fixing cable ducting 100 AF1-VB with hexagonal slotted head AF1-VB510 Support Pushbuttons, switches 1 DX1-AP and pilot lights XB5-A Metal guards Ø 40 Emergency stop Black 1 ZBZ Padlocking and mushroom head possible pushbuttons, either standard or trigger action Red 1 ZBZ Yellow 1 ZBZ ZBZ-160i Blue 1 ZBZ Plastic blanking For Ø control 10 ZB5-SZ plug, round, and signalling units black with circular head ZB5-SZ3 Plastic blanking For Ø control 10 ZB5-SZ plug, square, and signalling units black with square head Add-on square Gives square appearance 10 ZB5-AZ trim to circular heads ZB5-A Nut Fixing head 10 ZB5-AZ ZB5-AZ905 Bezel tool Tightening head fixing 1 ZB5-AZ nut ZB5-AZ901 Anti-rotation Heads 10 ZB5-AZ plate Modules for AS-i interface, see page 1/49. Te /51

13 Separate components, accessories and replacement parts References BA 9s bulbs and associated accessories Description Rating Colour Sold in Unit Weight lots of reference DL1-CJ0iii LEDs on z 4 V White 1 DL1-CJ BA 9s base Green 1 DL1-CJ Red 1 DL1-CJ Yellow 1 DL1-CJ Blue 1 DL1-CJ DL1-CEiii 6 V - 1. W White 1 DL1-CD Green 1 DL1-CD Red 1 DL1-CD Yellow 1 DL1-CD DL1-CFiii Blue 1 DL1-CD Incandescent 6 V - 1. W 10 DL1-CB bulbs 4 V - W 10 DL1-CE V -.4 W 10 DL1-CE Neon bulbs V 10 DL1-CF XBF-X V 10 DL1-CF Fluorescent V Green 1 DL1-CG bulbs Blue 1 DL1-CH Bulb extractor 1 XBF-X Lens cap Illuminated 1 ZBZ tightening pushbuttons tool with flush push ZBZ-8 Replacement keys for emergency stop trigger action mushroom head and selector switch Description Reference Weight ZBG-455 Set of keys n 455 ZBG n 4A185 ZBD-A n Z4 ZBD-Z n LU1 ZBD-LU n LU ZBD-LU n LU3 ZBD-LU n LU4 ZBD-LU n LU5 ZBD-LU n LU6 ZBD-LU n LU7 ZBD-LU n LU8 ZBD-LU n LU9 ZBD-LU n LU10 ZBD-LU n LU11 ZBD-LU n LU1 ZBD-LU n LU13 ZBD-LU n LU14 ZBD-LU n 8D1 ZBD-8D n 41E ZBG-41E n 458A ZBG-458A n 50E ZBG-50E n 3131A ZBG-3131A /5 Te

14 Replacement parts ZBP-0 ZBW-008 ZBV-01i3 ZBV-01i Clear boots Description For use with Sold in Unit Weight lots of reference Single boots Booted pushbuttons with circular head 10 ZBP Booted pushbuttons with circular head 10 ZBP-0A 0.00 used in food industry applications Double boots Double-headed pushbuttons with or 10 ZBW without pilot light Double-headed pushbuttons used in 10 ZBW-008A food industry applications Lens caps For use with Colour Sold in Unit Weight lots of reference Circular lens caps for LED light sources. Can be used with XAL control station, see page 3/10. Pilot lights White 10 ZBV Green 10 ZBV Red 10 ZBV Yellow 10 ZBV Blue 10 ZBV different colour grooved lenses (1) 1 ZBV-0103S Illuminated pushbuttons White 10 ZBW with flush push Green 10 ZBW Red 10 ZBW Yellow 10 ZBW Blue 10 ZBW Illuminated pushbuttons White 10 ZBW with projecting push Green 10 ZBW Red 10 ZBW Yellow 10 ZBW Blue 10 ZBW Square lens caps for LED light sources. Can be used with XAL control station, see page 3/10. Pilot lights White 10 ZBC-V Green 10 ZBC-V Red 10 ZBC-V Yellow 10 ZBC-V Blue 10 ZBC-V Illuminated pushbuttons White 10 ZBC-W with flush push Green 10 ZBC-W Red 10 ZBC-W Yellow 10 ZBC-W Blue 10 ZBC-W Illuminated pushbuttons White 10 ZBC-W with projecting push Green 10 ZBC-W Red 10 ZBC-W Yellow 10 ZBC-W Blue 10 ZBC-W Circular lens caps for incandescent and neon light sources Pilot lights White 10 ZBV Green 10 ZBV Red 10 ZBV Yellow 10 ZBV Blue 10 ZBV Clear 10 ZBV Illuminated pushbuttons White 10 ZBW with flush push Green 10 ZBW Red 10 ZBW Yellow 10 ZBW Blue 10 ZBW Clear 10 ZBW Illuminated pushbuttons White 10 ZBW with projecting push Green 10 ZBW Red 10 ZBW Yellow 10 ZBW Blue 10 ZBW Clear 10 ZBW (1) White, Green, Red, Yellow, Blue. Te /53

15 pages 1/ to 1/9 pages 1/10 to 1/13 pages 1/54 to 1/61 Harmony style 4 Pushbuttons, switches and pilot lights, with chromium plated metal bezel Separate components and accessories References Accessories Description Application Sold in Unit Weight lots of reference 1 Cable ducting Fixes beneath head 10 AF1-XA support AF1-XA1 M5 x 10 screw Fixing cable ducting 100 AF1-VB with hexagonal slotted head Support Pushbuttons, switches 1 DX1-AP and pilot lights XB4-B AF1-VB510 Metal guards Ø 40 Emergency Black 1 ZBZ Padlocking stop and mushroom possible head pushbuttons Chrome 1 ZBZ Red 1 ZBZ Yellow 1 ZBZ ZBZ-160i Blue 1 ZBZ Metal blanking For Ø control 10 ZB4-SZ plug, round, and signalling units chromium plated (1) ZB4-SZ3 Plastic blanking For Ø control 10 ZB5-SZ plug, round, and signalling units black () Modules for AS-i interface Description Application Sold in Unit Weight lots of reference ZB5-SZ3 Mounted on panel, with a Harmony style pushbutton Profil P7.0 41/0 direct supply 1 XBZ-S for AS-i bus (1) Requires a ZB4-BZ009 body/fixing collar for mounting. () Fixing nut included with blanking plug. Te 1/49