Rotary Switches AC09, 16 and 32

Size: px
Start display at page:

Download "Rotary Switches AC09, 16 and 32"

Transcription

1 09, 16 and 32 igital code output type escription FUJI series rotary switches offer a wide choice of output codes. They feature sliding u-flashed contacts for high contact reliability. Inhibitor and parity check circuits guard against switch malfunctions caused by error signals. With only seven connections to make, these switches are an economical solution to multi switching needs. Features u-flashed contacts for high contact reliability. The protection of operator section meets the IP65 (IE), so these switches can be used in oil-splash environments, such as on machine tool control panels. wide choice of output codes fits a broad range of applications. vailable step angles are 15,, and 360 /26 (13.85 ). Real binary code, complementary binary code, and real gray code are available. Switches are available with connectors or with lock rings for easy handling. s are user selectable F90-9, 210, 211 Ratings Volts Operational current () (resistive load) 50V V V V 0.25 Type number nomenclature Basic type Mounting 09: M9 nut 16: M16 adapter 32: dapter (32mm mounting pitch) Type of code : omplementary binary code ngle of step ngle X: 0 to 11 W: 360 /13 (27.69 ) 0 to 12 Y: 15 0 to 23 Z: 360 /26 (13.85 ) 0 to 25 Start vailable step angle 0 to 11: 0 to 12: 360 /13 (27.69 ) 0 to 23: 15 0 to 25: 360 /26 (13.85 ) Performance Rated insulation voltage 60V Operating temperature to +70 Humidity 45 to 85%RH (non condensation) Service life Mechanical 50,000 operations Electrical 50,000 operations ielectric Between terminals 250V, 1 minute strength Between terminals and ground 1500V, 1 minute Insulation Between terminals 500MΩ or more resistance Between terminals and ground 5,000MΩ or more egree of protection (operator section) 09 Z 0 / 25 L1 E 01 / 0007 IP65 (IE) With or without lock ring Blank: Without lock ring 0007: With lock ring 0009: With adhesive lock ring With or without connector Blank:, without connector 01:, with right-angle connector 02: 8-termianl, with straight connector B01: 7-terminal, with right-angle connector With or without stopper screw Blank: With stopper screw E: Without stopper screw Length of shaft (mm) L1: L2: L3: 18.5 L4: End vailable step angle 0 to 11: 0 to 12: 360 /13 (27.69 ) 0 to 23: 15 0 to 25: 360 /26 (13.85 ) Note: When shorter action than the maximum range of switch action is used, stopper screws are used. However, stopper screws are not used if the maximum action range is used when either 15 (symbol Y) or 360 /26 (symbol Z) is specified. Fuji Electric F omponents & Systems o., Ltd./ & atalog Information subject to change without notice /7

2 09, 16 and 32 M9 nut mounting ngle of onnector Lock ring Type* * 2 * 3 step Real binary code omplementary Real gray code binary code Without Without lock ring 09-RX / ( ) 09-X / ( ) 09-GX / ( ) connector With lock ring 09-RX / ( ) / X / ( ) / GX / ( ) /0007 With adhesive lock ring 09-RX / ( ) / X / ( ) / GX / ( ) /0009 With right Without lock ring 09-RX / ( ) X / ( ) GX / ( ) 01 angle With lock ring 09-RX / ( ) 01/ X / ( ) 01/ GX / ( ) 01/0007 connector With adhesive lock ring 09-RX / ( ) 01/ X / ( ) 01/ GX / ( ) 01/0009 With Without lock ring 09-RX / ( ) X / ( ) GX / ( ) 02 straight With lock ring 09-RX / ( ) 02/ X / ( ) 02/ GX / ( ) 02/0007 connector With adhesive lock ring 09-RX / ( ) 02/ X / ( ) 02/ GX / ( ) 02/ /13 Without Without lock ring 09-RW / ( ) 09-W / ( ) (27.69 ) connector With lock ring 09-RW / ( ) / W / ( ) /0007 With adhesive lock ring 09-RW / ( ) / W / ( ) /0009 With right Without lock ring 09-RW / ( ) W / ( ) 01 angle With lock ring 09-RW / ( ) 01/ W / ( ) 01/0007 connector With adhesive lock ring 09-RW / ( ) 01/ W / ( ) 01/0009 With Without lock ring 09-RW / ( ) W / ( ) 02 straight With lock ring 09-RW / ( ) 02/ W / ( ) 02/0007 connector With adhesive lock ring 09-RW / ( ) 02/ W / ( ) 02/ Without Without lock ring 09-RY / ( ) 09-Y / ( ) 09-GY / ( ) connector With lock ring 09-RY / ( ) / Y / ( ) / GY / ( ) /0007 With adhesive lock ring 09-RY / ( ) / Y / ( ) / GY / ( ) /0009 With right Without lock ring 09-RY / ( ) Y / ( ) GY / ( ) 01 angle With lock ring 09-RY / ( ) 01/ Y / ( ) 01/ GY / ( ) 01/0007 connector With adhesive lock ring 09-RY / ( ) 01/ Y / ( ) 01/ GY / ( ) 01/0009 With Without lock ring 09-RY / ( ) Y / ( ) GY / ( ) 02 straight With lock ring 09-RY / ( ) 02/ Y / ( ) 02/ GY / ( ) 02/0007 connector With adhesive lock ring 09-RY / ( ) 02/ Y / ( ) 02/ GY / ( ) 02/ /26 Without Without lock ring 09-RZ / ( ) 09-Z / ( ) 09-GZ / ( ) (13.85 ) connector With lock ring 09-RZ / ( ) / Z / ( ) / GZ / ( ) /0007 With adhesive lock ring 09-RZ / ( ) / Z / ( ) / GZ / ( ) /0009 With right Without lock ring 09-RZ / ( ) Z / ( ) GZ / ( ) 01 angle With lock ring 09-RZ / ( ) 01/ Z / ( ) 01/ GZ / ( ) 01/0007 connector With adhesive lock ring 09-RZ / ( ) 01/ Z / ( ) 01/ GZ / ( ) 01/0009 With Without lock ring 09-RZ / ( ) Z / ( ) GZ / ( ) 02 straight With lock ring 09-RZ / ( ) 02/ Z / ( ) 02/ GZ / ( ) 02/0007 connector With adhesive lock ring 09-RZ / ( ) 02/ Z / ( ) 02/ GZ / ( ) 02/0009 Notes: * 1 Replace the marks by the Start and End s Step angle 360 / /26 Start and End s 0 to 11 0 to 12 0 to 23 0 to 25 * 2 Replace the ( ) mark by the shaft length code L1: 16mm L2: 18mm L3: mm L4: mm * 3 Replace the mark by the connector Blank:, without connector 01:, with right angle connector 02:, with straight connector B01: 7-terminal, with right angle connector /8 Fuji Electric F omponents & Systems o., Ltd./ & atalog Information subject to change without notice

3 09, 16 and 32 M16 adapter mounting ngle of onnector Type* 1 * 2 step Real binary code omplementary Real gray code binary code Without connector 16-RX / L4 16-X / L4 16-GX / L4 With right angle connector 16-RX / L X / L GX / L4 01 With straight connector 16-RX / L X / L GX / L /13 Without connector 16-RW / L4 16-W / L4 (27.69 ) With right angle connector 16-RW / L W / L4 01 With straight connector 16-RW / L W / L Without connector 16-RY / L4 16-Y / L4 16-GY / L4 With right angle connector 16-RY / L Y / L GY / L4 01 With straight connector 16-RY / L Y / L GY / L /26 Without connector 16-RZ / L4 16-Z / L4 16-GZ / L4 (13.85 ) With right angle connector 16-RZ / L Z / L GZ / L4 01 With straight connector 16-RZ / L Z / L GZ / L4 02 Notes: * 1 Replace the marks by the Start and End s Step angle 360 / /26 Start and End s 0 to 11 0 to 12 0 to 23 0 to 25 * 2 Replace the mark by the connector Blank:, without connector 01:, with right angle connector 02:, with straight connector B01: 7-terminal, with right angle connector daptor mounting (32mm mounting pitch) ngle of onnector Type* 1 * 2 * 3 step Real binary code omplementary Real gray code binary code Without connector 32-RX / ( ) 32-X / ( ) 32-GX / ( ) With right angle connector 32-RX / ( ) X / ( ) GX / ( ) 01 With straight connector 32-RX / ( ) X / ( ) GX / ( ) /13 Without connector 32-RW / ( ) 32-W / ( ) (27.69 ) With right angle connector 32-RW / ( ) W / ( ) 01 With straight connector 32-RW / ( ) W / ( ) Without connector 32-RY / ( ) 32-Y / ( ) 32-GY / ( ) With right angle connector 32-RY / ( ) Y / ( ) GY / ( ) 01 With straight connector 32-RY / ( ) Y / ( ) GY / ( ) /26 Without connector 32-RZ / ( ) 32-Z / ( ) 32-GZ / ( ) (13.85 ) With right angle connector 32-RZ / ( ) Z / ( ) GZ / ( ) 01 With straight connector 32-RZ / ( ) Z / ( ) GZ / ( ) 02 Notes: * 1 Replace the marks by the Start and End s Step angle 360 / /26 Start and End s 0 to 11 0 to 12 0 to 23 0 to 25 * 2 Replace the ( ) mark by the shaft length L1: 14.5mm L2: 16.5mm L3: 18.5mm L4:.5mm * 3 Replace the mark by the connector Blank:, without connector 01:, with right angle connector 02:, with straight connector B01: 7-terminal, with right angle connector Fuji Electric F omponents & Systems o., Ltd./ & atalog Information subject to change without notice /9

4 09, 16 and No. No F 2 B 4 E 8 16 G INH : omplementary binary code No. No F 2 B 4 E 8 16 G INH No. No a F b B c E d e G P 12- No. No F 2 B 4 E 8 P G INH : omplementary binary code No. No F 2 B 4 E 8 P G INH No. No a F b B c E d P G No. No No. No F 2 F 2 B 4 B 4 E 8 E 8 16 P G INH G INH : omplementary binary code : omplementary binary code No. No No. No F 2 F 2 B 4 B 4 E 8 E 8 16 P G INH G INH No. No a F b B c E d e G P INH : P : : : Inhibit terminal Parity check terminal ommon terminal Turned ON /210 Fuji Electric F omponents & Systems o., Ltd./ & atalog Information subject to change without notice

5 09, 16 and 32 ccessories Lead wire with connector () Lock ring F F Length of lead wire (m) Type Mass (g) 0.5 X (Standard) X X Type Mass (g) Lock ring (inserted) X001 2 Lock ring (sealed) X001 5 X001 X001.5 ø ø ø9.1 ø L L : 0.5, 1.0, 2.0m ø imensions, mm 09 M9P= (with connector) M9P= * L Shaft length L1 L2 L3 L4 * Mass (g) Without connector With connector BEFG ø Straight connector Right-angle connector 32 8 * L ø BEFG ø2.7 In case of using lock ring (09- /0007) +0.3 ø to Mass: 47g M16P=1 ø BEFG ø * L M9P=0.75 M2.3 6 Shaft length L1 L2 L3 L4 * Mass (g) BEFG 15.8 ø32±0.2 ø17 M2.3 (for flat head screw) Fuji Electric F omponents & Systems o., Ltd./ & atalog Information subject to change without notice /211

6 Z B T M Rotary Switches 09, 16 and 32 Installation Switch body O ring Panel Flat washer Toothed look washer M9 hexagonal nut 09 Pass the switch body through the hole from the back of the panel, and secure it by tightening the hexagonal nut with a flat washer and a toothed lock washer. The recommended tightening torque for the hexagonal nut is 1.5 to 2N m. Insert the lock ring (X001) between the panel and the flat washer, and the adhesive lock ring (X001) between the switch body and the panel. Packing Panel ø16 mounting nut 16 Pass the switch body with a bezel through the hole from the back of the panel, and secure it with a φ16 mounting nut. The recommended tightening torque for the nut is 0.6 to 1N m. Panel M2.3 flat head screw 32 Pass the switch body through the hole from the back of the panel, and secure it with two flat head screws from the face of the panel. The recommended tightening torque for the flat head screws is 0.3 to 0.5N m. Notes on use 1. onnecting wires Note the following points when soldering: The power of the soldering iron must not be over W. Use solder with resin flux core. omplete soldering within 5 seconds if using a W soldering iron, or within 10 seconds if using a W soldering iron. 2. Note on the case linkage 4. s Insert stopper screws into the switch body holes marked with letters, as shown in the insertion example on the right. These tables below show that the start stopper screw is inserted in the hole on the left of the setting and the end s stopper screw is inserted in the hole on the right. holes (24) holes (26) E F G H I J E F G H I J K B K L L X M N W N Y O Switch body o not disconnect this case linkage. V U T S O If step angle X ( ) or Y (15 ) is specified. R Q P W X V U P If step angle W (360 /13) or Z (360 /26) is specified. S R Q 3. Number of stopper screws shipped 09 and 32 Step angle: (symbol X) Positions 0/11 (0 to 11): one screw. User-selectable start and stop s: two screws (one for start, one for end ). Step angle: 15 (symbol Y) Positions 0/ (0 to ): one screw. User-selectable start and stop s: two screws (one for start, one for end ). Step angle: 360 /26 (symbol Z) Positions 0/24 (0 to 24): one screw. User-selectable start and stop s: two screws (one for start, one for end ). 16 ustomers can specify the stopper screw s. The switch is then shipped with stopper screws already in the specified s. 5. Installing a stopper screw The maximum tightening torque for a stopper screw is 0.1N m. Screw the stopper screw into until it hits the body frame rib. o not overtighten the screw. Frame rib /212 Fuji Electric F omponents & Systems o., Ltd./ & atalog Information subject to change without notice

7 09, 16 and 32 Insertion example 1 ➀ Step angle X:, W: 360 /13, Y: 15, Z: 360 /26 ➁ : /7L1 ➃ With a stopper screw Blank: With stopper screw E: No stopper screw ➂ : 7 If symbol ➀ (step angle) is X-----type 09-X0/7L1: Insert the start side stopper screw in hole and the end side screw in hole Q E G I K M O Q S U W Start side stopper screw End side stopper screw If symbol ➀ (step angle) is W-----type 09-W0/7L1: Insert the start side stopper screw in hole and the end side screw in hole Q E G I K M O Q S U W Y Start side stopper screw End side stopper screw If symbol ➀ (step angle) is Y-----type 09-Y0/7L1: Insert the start side stopper screw in hole and the end side screw in hole J Start side B E F G H I J K L M N O P Q R S T U V W X End side E F G H I J K L M N O P Q R S T U V W X B Start side stopper End side stopper screw screw Notes: 1. If the range of action is designated as 0/ (0 to ), insert a stopper screw into hole only. 2. If the range of action is designated as 0/23 (0 to 23), no stopper screws are inserted (symbol ➃ is E). If symbol ➀ (step angle) is Z-----type 09-Z0/7L1: Insert the start side stopper screw in hole and the end side screw in hole J Start side B E F G H I J K L M N O P Q R S T U V W X Y Z End side E F G H I J K L M N O P Q R S T U V W X Y Z B Start side stopper End side stopper screw screw Notes: 1. If the range of action is designated as 0/24 (0 to 24), insert a stopper screw in hole only. 2. If the range of action is designated as 0/25 (0 to 25), no stopper screws are inserted (symbol ➃ is E). Insertion example 2 Step angle 09-RX2/ E G I K M O Q S U W Start side stopper screw End side stopper screw Fuji Electric F omponents & Systems o., Ltd./ & atalog Information subject to change without notice /213

CS Series. Capacitance Type. Type. Proximity Sensor. Features

CS Series. Capacitance Type. Type. Proximity Sensor. Features INFORMATI Series Features Capacitance Type - Metal cylinder/resin cylinder/square type - Non-metal objects such as wood, paper, plastic and water can be detected. - The operating distance is adjustable

More information

Compact and highly reliable type available in many varieties. Typical Specifications. Output signal. Rating. Operating life

Compact and highly reliable type available in many varieties. Typical Specifications. Output signal. Rating. Operating life 1 11mm Size ompact and highly reliable type available in many varieties. Typical Specifications Output signal Items Specifications Two phase of, B Three phase of, B and (1H) Self-return switch (11 / 10B)

More information

Absolute encoders multiturn

Absolute encoders multiturn elektronischer electronic multiturn, Multiturn, magnetic magnetisch Sendix M66 / M68 (shaft / hollow shaft) The Sendix M6 with Energy Harvesting Technology is an electronic multiturn encoder in miniature

More information

Attachments. T Type Interface: (T) M5 X 0.8, 1/ 8, 1/ 4, 3/ 8, 1/ 2 Makes it easy to diverge air out with T type interface

Attachments. T Type Interface: (T) M5 X 0.8, 1/ 8, 1/ 4, 3/ 8, 1/ 2 Makes it easy to diverge air out with T type interface ttachments Piping dapter M X 0.8, / 8, /, / 8, /, /, asy maintenance. Makes it possible to attach and detach equipment without removing piping. -0 Piping adapter To order piping adapter with bracket, the

More information

Connector~Tech Providing Harsh Environment Connector

Connector~Tech   Providing Harsh Environment Connector Connector~Tech www.connectortech.com.au Providing Harsh Environment Connector SOLUTIONS Tajimi TC18 series connectors are water-pro up to 30 meters in depth. Economical and highly reliable construction

More information

Type Plunger Height x pitch Operating force (OF) Without ground terminal Flat type 4.3 x 6.5 mm General 0.98 N (100 gf) B3F-6000 B3F-6100

Type Plunger Height x pitch Operating force (OF) Without ground terminal Flat type 4.3 x 6.5 mm General 0.98 N (100 gf) B3F-6000 B3F-6100 Mechanical Key Switch (Ral) B3F- Taped Ral Switches Automatic mounting possible via general- ral taped component inserters. Conform to EIAJ RC 1008A Electronic Component Taping Dimensions. The same snap-action

More information

General-purpose Multi-Contact Circular Waterproof Connectors

General-purpose Multi-Contact Circular Waterproof Connectors General-purpose Multi-ontact ircular Waterproof onnectors RM-W Series Plug _ straight Ø. Ø Long backshell Overview High performance waterproof circular connectors and cable assemblies used in variety of

More information

9mm Size Metal Shaft Multi-ganged Type. Typical Specifications. Total resistance tolerance ±20% Maximum operating voltage

9mm Size Metal Shaft Multi-ganged Type. Typical Specifications. Total resistance tolerance ±20% Maximum operating voltage K09 9mm Size Multi-ganged 9.mm width potentiometer ideal for various s of control Typical Specifications Items Specifications tolerance ±% Maximum operating voltage 0V C, V DC Total rotational angle 3

More information

Compact and highly reliable type available in many varieties. Typical Specifications. Output signal. Rating. Operating life

Compact and highly reliable type available in many varieties. Typical Specifications. Output signal. Rating. Operating life 1 11mm Size Compact and highly reliable type available in many varieties Typical Specifications Items Specifications ncoders Product Line Structure Horizontal configuration Length of the shaft (mm) Torque

More information

Terminal Block Accessories

Terminal Block Accessories Kliptite (Quick onnect) - Single Row Specifications: Terminal lock ccessories Kliptite (Quick onnect) accept standard female wire terminals. These Klipties are ideal for applications that require a positive,

More information

Display Units. DD96 Series

Display Units. DD96 Series isplay Units S Series 4 Series 9 Series isplay Units (Selection Guide) Series S Shape Unit Type ecimal/hexadecimal/extra ecimal. isplay Part (mm) 4. -segment Red LE, Green LE isplay haracter ecimal display

More information

Imformation of C091D series

Imformation of C091D series Imformation of C09D series The QTY of contacts is -pin to -pin, the connection method for the thread type, pinhole connections for welding type, press-fit and PCB type. This series of connectors to prevent

More information

Commercial Generator Parts Catalog. PROTEC Series

Commercial Generator Parts Catalog. PROTEC Series Commercial Generator Parts Catalog PROTEC Series YD ÁÁ ÁÁ To avoid errors or delay in filling your parts order, always give the MODEL, SPEC NO. and SERIAL NO. from the Onan nameplate. For handy reference,

More information

16mm Size Metal Shaft Type

16mm Size Metal Shaft Type Potentiometer 6mm Size Type RK63 Series A wide range of versatility products applicable for various types of control. Typical Specifications Items Total tolerance Maximum operating voltage Total rotational

More information

Performance. Standards. Technical data

Performance. Standards. Technical data ilos Loadbreak disconnectors for INrail and wall mounting ilos up to ilos 2 up to los up to Order codes pplications pprovals / Marking ddon devices Performance INrail type and wall mounting type Main disconnector,

More information

Single Socket and Horizontal Metering

Single Socket and Horizontal Metering idwest lectric Products Single Socket and Horizontal etering G pproved Single Socket etering G pproved pplication Information idwest s Single Socket etering products are designed for residential use. They

More information

HARTING D-Sub Selection Guide

HARTING D-Sub Selection Guide HARTING D-Sub Selection Guide People Power Partnership D-Sub Selection Guide D-Sub Device Connectivity HARTING Connectivity & Networks generates solutions throughout the triad of Installation Technology,

More information

SPECIFICATION. 1. Scope This specification applies ferrite Chip common mode filters C3-2012F-Series to be delivered to user.

SPECIFICATION. 1. Scope This specification applies ferrite Chip common mode filters C3-2012F-Series to be delivered to user. C C3-202F-Series. Scope This specification applies C3-202F-Series to be delivered to user. 2. Product Identification C3-202 F - 900-2P - T () (2) (3) (4) (5) (6) () Product name (2) Shapes and dimensions

More information

Base S C T B

Base S C T B OPAL ELETRONIS ROTARY ODED SWITHES S-00/2000 RoHS compatible INTERNAL STRUTURE S-00 / 2000 series 4 2 3 6 FEATURES Lead-free soldering Fine click with metallic spring Low profile of 3.9 mm makes perfect

More information

SMD Switch SI-C3436A General specification. Soldering conditions Reflow Soldering condition. Standard Reel Dimensions (mm) Packing specification

SMD Switch SI-C3436A General specification. Soldering conditions Reflow Soldering condition. Standard Reel Dimensions (mm) Packing specification SMD Switch SI - C3436A - 7017 Features External Dimensions : 3.4mm x 3.6mm, Height 0.70mm Suitable for thinner and lighter portable devices Suitable for water proof devices Reflow soldering Package With

More information

Thermal-Magnetic Circuit Breaker 2210-S2..

Thermal-Magnetic Circuit Breaker 2210-S2.. Thermal-Magnetic Circuit Breaker -S.. Description One, two and three pole thermal-magnetic circuit breakers with trip-free mechanism and toggle actuation (S-type TM CBE to EN 60934/IEC 934). Designed for

More information

Thermal-Magnetic Circuit Breaker 2210-S2..

Thermal-Magnetic Circuit Breaker 2210-S2.. Thermal-Magnetic Circuit Breaker -S.. Description One, two and three pole thermal-magnetic circuit breakers with trip free mechanism and toggle actuation (S-type TM CBE to EN 6094/IEC 94). Designed for

More information

DIM. A (+ 0,05 0,51) .135 ±.015 (3,43 ± 0,38) COMMON LUG INTEGRAL ASSEMBLY NUT, DO NOT REMOVE 1/4-32 UNEF-2A THREAD

DIM. A (+ 0,05 0,51) .135 ±.015 (3,43 ± 0,38) COMMON LUG INTEGRAL ASSEMBLY NUT, DO NOT REMOVE 1/4-32 UNEF-2A THREAD Multi-Deck SERIES 0 SERIES 0 0." Diameter, / Amp, Standard, Military SR FEATURES Proven Quality in Thousands of Applications Gold-plated Contact System 0,,, 0 and 0 Angle Options MIL Qualified Versions

More information

Flexitest Switch Assemblies Type FT-19R and FT-19RX Supersedes DB March 2008

Flexitest Switch Assemblies Type FT-19R and FT-19RX Supersedes DB March 2008 Flexitest Switch Assemblies Type FT-19R and FT-19RX Supersedes DB41-078 March 2008 FT-19R and FT-19RX FT-19R 3RU with Individual Clear Covers APPLICATION FEATURES The type FT-19R (standard length) and

More information

Amphenol C 091 A/B/D. Circular Connectors. Amphenol-Tuchel Electronics GmbH

Amphenol C 091 A/B/D. Circular Connectors. Amphenol-Tuchel Electronics GmbH Amphenol C 091 A/B/D Circular Connectors Amphenol-Tuchel Electronics GmbH General information These connectors are designed and produced in conformity with the low-voltage directive (/3/EWG) respectively

More information

Thermal-Magnetic Circuit Breaker 2210-S2...

Thermal-Magnetic Circuit Breaker 2210-S2... Thermal-Magnetic Circuit Breaker 0-S... Description One, two and three pole thermal-magnetic circuit breakers with trip free mechanism and toggle actuation (S-type TM CBE to EN 60934/IEC 934). Designed

More information

Thermal-Magnetic Circuit Breaker 2210-S2...

Thermal-Magnetic Circuit Breaker 2210-S2... Description One, two and three pole thermal-magnetic circuit breakers with trip free mechanism and toggle actuation (S-type TM CBE to EN 6094/IEC 94). Designed for panel or plug-in mounting. Available

More information

VX25 Enclosure System. Technical documentation PE conductor connection, current carrying capacity

VX25 Enclosure System. Technical documentation PE conductor connection, current carrying capacity VX Enclosure System Technical documentation PE conductor connection, current carrying capacity Enclosure system VX Contents Contents. General remarks. Introduction. Notes on the design of the earthing

More information

MODEL NAME : LLDMWW0-15K*0*A

MODEL NAME : LLDMWW0-15K*0*A Eagle Eye (Outdoor LED Module) Application Note MODEL NAME : LLDMWW0-15K*0*A RoHS Compliant HALOGEN FREE (30)-4022 1 / 16 CONTENTS 1. Product Description 3/16 2. Specifications 2.1. Chromaticity Bins for

More information

Thermal-Magnetic Circuit Breaker 2210-S2..

Thermal-Magnetic Circuit Breaker 2210-S2.. Thermal-Magnetic Circuit Breaker -S.. Description One, two and three pole thermal-magnetic circuit breakers with trip free mechanism and toggle actuation (S-type TM CBE to EN 60934/IEC 934). Designed for

More information

Insulated shaft type with a wide variety of applications. Typical Specifications. Rating. Operating life. Operating temperature range.

Insulated shaft type with a wide variety of applications. Typical Specifications. Rating. Operating life. Operating temperature range. ECE ECD mm Size shaft type with a wide variety of applications Typical Specifications Items Specifications Rating Operating life Without detent With detent 0.m V DC m V DC,000 cycles 0,000 cycles (Lightest

More information

SD-1000/2000 ROTARY CODED SWITCHES S D T B FEATURES PART NUMBER DESIGNATION. Please refer to the LIST OF PART NUMBERS when placing orders.

SD-1000/2000 ROTARY CODED SWITCHES S D T B FEATURES PART NUMBER DESIGNATION. Please refer to the LIST OF PART NUMBERS when placing orders. SD-00/2000 RoHS compliant INTERNAL STRUCTURE SD-00 / 2000 series Part name Material Flammability FEATURES Housing Polyphenylenesulphide UL9V-0 Metallic spring O ring Insert rotor Base Stainless (SUS 30)

More information

VOLUMEC. Valve Position Indicator 5

VOLUMEC. Valve Position Indicator 5 VOLUMEC Valve Position Indicator 5 2 KRACHT CORP. 8600 S Wilkinson Way Unit A Perrysburg, OH 43551 USA P +1 419 874 1000 F +1 419 874 1006 flowmeters@krachtcorp.com www.krachtcorp.com VOLUMEC Valve Position

More information

Universal limit switches

Universal limit switches SWITCHES.CROUZET.COM 1 LIMIT SWITCHES 0/016 Universal limit switches 8384 standard 8384 with positive break operation Conformity to standards IEC / EN 60947--1, including Annex K for version with positive

More information

SC-1000/2000 ROTARY CODED SWITCHES S C T B FEATURES PART NUMBER DESIGNATION. Please refer to the LIST OF PART NUMBERS when placing orders.

SC-1000/2000 ROTARY CODED SWITCHES S C T B FEATURES PART NUMBER DESIGNATION. Please refer to the LIST OF PART NUMBERS when placing orders. SC-00/2000 RoHS compliant INTERNAL STRUCTURE SC-00 / 2000 series 4 2 3 6 7 5 FEATURES Part name Material Flammability Housing Metallic spring O ring Insert rotor Polyphenylenesulphide Stainless (SUS 30)

More information

Amphenol. Amphenol-Tuchel Electronics GmbH. Circular Connectors C 091 A/B/D Series

Amphenol. Amphenol-Tuchel Electronics GmbH. Circular Connectors C 091 A/B/D Series Amphenol Amphenol-Tuchel Electronics GmbH Circular Connectors C 09 A/B/D Series The Company Amphenol-Tuchel Electronics GmbH is a member of the USA based Amphenol Corporation. With our own global presence

More information

32 Input AC Block I/O Module

32 Input AC Block I/O Module Input AC Module Cat. No. 79-A0 Series B Installation Mount the block I/O module in a vertical (recommended) or horizontal position. Allow sufficient room around the block for cooling air to flow through

More information

40 CD RANGE FLUSH-MOUNTING DISTRIBUTION BOARDS AND ENCLOSURES

40 CD RANGE FLUSH-MOUNTING DISTRIBUTION BOARDS AND ENCLOSURES DISTRIBUTION BOARDS FLUSH-MOUNTING DISTRIBUTION BOARDS GWTEST SOFTWARE (see page 322) Complementary system items Ordinary installation - protected flush mounting DISTRIBUTION / JUNCTION Protection devices...

More information

C V S T B T 1 0 ( )

C V S T B T 1 0 ( ) SLIDE SINGLE SWITCHES TURN WIREWOUND ( mm TRIMMERS PITCH) -6/- -T 6 FEATURES Lowest profile design of. mm Fine pitch of mm Easy motion with knob height of 0. mm 6 Part Part name name Material Material

More information

SECTION 1 - WHAT IS A BTU METER? BTU's = Flow x ΔT Any ISTEC BTU Meter System consists of the following main components:

SECTION 1 - WHAT IS A BTU METER? BTU's = Flow x ΔT Any ISTEC BTU Meter System consists of the following main components: SECTION 1 - WHAT IS A BTU METER? ISTEC BTU Meters measure energy usage by multiplying flow rate and temperature difference. As the water (or other liquid) passes through these lines, the multi-wing turbine

More information

www. ElectricalPartManuals. com Flexitest Switch Assemblies Type FT-19R and FT-19RX INTL APPLICATION

www. ElectricalPartManuals. com Flexitest Switch Assemblies Type FT-19R and FT-19RX INTL APPLICATION Effective: January 2004 Supersedes, dated June 1998 APPLICATION QUALITY FEATURES Descriptive Bulletin 41-078INTL Flexitest Switch Assemblies Type The type FT-19R (standard length) and FT-19RX (extended

More information

16 Input AC Block I/O Module

16 Input AC Block I/O Module 6 Input AC Module Cat. No. 79-6A0 Series B Installation Mount the block I/O module in a vertical (recommended) or horizontal position. Allow sufficient room around the block for cooling air flow through

More information

High Pressure Ball Valves

High Pressure Ball Valves High Pressure all Valves 0,, 0, 0,000 psi (0 bar),000 psi (0 bar) 0,000 psi ( bar) ITOK Group ITOK GmbH (Headquarter) Sprendlinger Landstr., 0 Offenbach am Main, Germany Tel.: + 00 ax: + 00 ITOK, Inc.

More information

W250: Compact photoelectric switch series for a broad range of applications

W250: Compact photoelectric switch series for a broad range of applications W0 Photoelectric switches Photoelectric proximity switches, BGS Photoelectric reflex switches Through-beam photoelectric switches W0: Compact photoelectric switch series for a broad range of applications

More information

Assembly Instructions for the 1-Wire Weather Station V2.0/V3.0

Assembly Instructions for the 1-Wire Weather Station V2.0/V3.0 Assembly Instructions for the 1-Wire Weather Station V2.0/V3.0 Tools and Supplies Required (not included): Phillips screwdriver 3/8" wrench Drill with 5/32" bit "U" type mounting bracket (i.e., part number

More information

Single cam type. Double cam type. Grip force N. Type Model/size Stroke Screw type straight style. Screw type tee style

Single cam type. Double cam type. Grip force N. Type Model/size Stroke Screw type straight style. Screw type tee style Type Model/size Stroke -SS-0-N. -SS-0-N. Single cam type -SS- 7. -SS-. -SS-4. -SD-0 Double cam type -SD- -SD-4. Screw type straight style Screw type tee style -FS- -FT- -FS- -FT- 0.9 1. 1.. 1. 4 Grip forcen

More information

XL-550. Liste de pièces Lista de Piezas Parts List

XL-550. Liste de pièces Lista de Piezas Parts List SINGER is the exclusive trademark of The Singer Company S.à.r.l or its Affi liates. 0 The Singer Company Limited S.à.r.l or its Affi liates. All rights reseved. XL-0 Liste de pièces Lista de Piezas Parts

More information

AREP Series Aluminum Solid Electrolytic Capacitors Aluminum Solid Electrolytic Capacitors

AREP Series Aluminum Solid Electrolytic Capacitors Aluminum Solid Electrolytic Capacitors Features -Super low ESR, high ripple current capability -Rated voltage:6.3~35vdc -Endurance:5,000 hours at 105ºC -Suitable for DC-DC converters, voltage regulators and decoupling applications -RoHS Compliant

More information

Miniature Toggle Switches

Miniature Toggle Switches E L TCT IP PUSH BUTT SLIE ROCKER TOGGLE INEX SPECIFICTIS CTCT RTING: @ VC or VC (Q contact) ELECTRICL LIFE:0,000 make-and-break cycles at full load CTCT RESISTNCE: 0 m max. initial @- VC,00 m INSULTI RESISTNCE:,000

More information

Up to 4 Poles on 1 Deck Up to 16 Positions Per Switch PC or Solder Lug Termination Positive Shaft Grounding for EMI/RFI Shielding GRAYHILL

Up to 4 Poles on 1 Deck Up to 16 Positions Per Switch PC or Solder Lug Termination Positive Shaft Grounding for EMI/RFI Shielding GRAYHILL SERIES 0 SERIES 0." iameter, 00m,.9" ehind Panel FETURES Optional Complete Seal for PC oard ssembly and Cleaning Small /" iameter Choice of., 0,,, 0 and ngles Up to Poles on eck Up to Positions Per Switch

More information

Load Washers. Force kn until kn. Type 9101A A

Load Washers. Force kn until kn. Type 9101A A Force Load Washers 0... 20 kn until 0... 700 kn Type 9101A... 9107A Force sensor for measuring quasistatic and dynamic forces in industrial monitoring tasks. F z The force sensors are delivered uncalibrated

More information

Ring encoder with 4mm height contribute to space saving and multifunctioning. Typical Specifications. Rating. Operating life

Ring encoder with 4mm height contribute to space saving and multifunctioning. Typical Specifications. Rating. Operating life E E mm Size encoder with mm height contribute to space saving and multifunctioning Typical Specifications Items Specifications Product Line Structure Dip ctuator l e n g t h(m m) Reflow Detent torque (mn

More information

XL-580. Liste de pièces Lista de Piezas Parts List Copyright SVP Worldwide - All rights reserved

XL-580. Liste de pièces Lista de Piezas Parts List Copyright SVP Worldwide - All rights reserved 0 Copyright SVP Worldwide - All rights reserved XL-0 Liste de pièces Lista de Piezas Parts List 0-6 0 March 0 A 0 0 6 6 Singer XL-0 Pos Part No Description 0 0 THRUST WASHER 60 MAIN SHAFT WITH BALANCER

More information

Amphenol Amphenol-Tuchel Electronics GmbH. C 091 A/B/D Series. Circular Connectors.

Amphenol Amphenol-Tuchel Electronics GmbH. C 091 A/B/D Series. Circular Connectors. mphenol mphenol-tuchel Electronics GmbH C 09 //D Series Circular Connectors www.industrial-amphenol.com Note from the CEO Ladies and Gentlemen, For over years mphenol has enjoyed success as the interconnection

More information

nufacturing Company, L.P San Felipe, Suite

nufacturing Company, L.P San Felipe, Suite REPAIR PARTS (2,3,4) Multi Zone Heat Pump Outdoor Unit 2MXS18GVJUAA 3MXS24JVJUAA 4MXS32GVJUAA nufacturing Company, L.P. 5151 San Felipe, Suite 500 www.amana-hac.com www.amana-hac.com This manual is to

More information

Chip Trimmer Potentiometer

Chip Trimmer Potentiometer Chip Potentiometer RH0/RH0 Series A general purpose, compact, and low-profile type that is suitable for a wide range of applications. Car Use Features Conforms to JIS C 0806- (Packaging of surface mount

More information

Important Instructions

Important Instructions Important Instructions Subject Use With Cabinet Hardmount Trunnion Replacement Cabinet Hardmount 8-60 Pound Washer-Extractors and Kits F77000, F7700, F7700, F7700, F7700, F7700, F9P and F9P WARNING This

More information

SHARK Snow Plow. 52 (132 cm) / 60 (152 cm) Complete system blade INSTRUCTIONS / ESTABLISHMENT

SHARK Snow Plow. 52 (132 cm) / 60 (152 cm) Complete system blade INSTRUCTIONS / ESTABLISHMENT SHARK Snow Plow 52 (132 cm) / 60 (152 cm) Complete system blade INSTRUCTIONS / ESTABLISHMENT OPERATING INSTRUCTIONS Congratulations! You ve just purchased the most durable plow system in the industry.

More information

nufacturing Company, L.P San Felipe, Suite

nufacturing Company, L.P San Felipe, Suite Mini-Split Heat Pump Outdoor Unit RXS09LVJU RXS12LVJU RXS15LVJU RXS18LVJU RXS24LVJU REPAIR PARTS nufacturing Company, L.P. 5151 San Felipe, Suite 500 www.amana-hac.com www.amana-hac.com This manual is

More information

Installation and Operation Manual. AllSync Plus Wired Clocks

Installation and Operation Manual. AllSync Plus Wired Clocks and Operation Manual AllSync Plus Wired Clocks Part # H004881 Rev. 4 September 2018 Safety Precautions AllSync Plus Clock & Operation Manual Troubleshooting General Operation Introduction Safety Precautions

More information

2.3. Rockers. Contents

2.3. Rockers. Contents . SVRSealed Vehicle SVRSealed Vehicle Rocker Contents Description SVRSealed Vehicle Above Panel Rocker Switch............... Below Panel Rocker Switch............... Technical Data and Specifications..........

More information

Series MHY2/MHW Angular Gripper. Cam actuation style is now standardized! MHZ2 MHZJ2 MHQ MHL2 MHR MHK MHS MHC2 MHT2 MHY2 MHW2 MRHQ 2.

Series MHY2/MHW Angular Gripper. Cam actuation style is now standardized! MHZ2 MHZJ2 MHQ MHL2 MHR MHK MHS MHC2 MHT2 MHY2 MHW2 MRHQ 2. 18 Angular Gripper Cam Style Rack & Pinion Style Series / Cam actuation style is now standardized! 2.8-1 18 Angular Gripper 18 Angular Gripper Series / Cam Style Rack & Pinion Style Series / Series MHY/Cam

More information

ULTRA-SLIM POLARIZED RELAY. Initial breakdown voltage* 2. Unit weight. Ex. TN 2 L2 H 12V

ULTRA-SLIM POLARIZED RELAY. Initial breakdown voltage* 2. Unit weight. Ex. TN 2 L2 H 12V TN ULTR-SLIM POLRIZED RELY TN-RELYS 4....8.8 SPEIFITIONS ontact rrangement Initial contact resistance max. (y voltage drop ) ontact material Rating power UL/S rating Expected life (min. operations) switching

More information

FL ballasts Electronic fixed output. PC TC PRO sr 1/2x11 42 W PC PRO compact

FL ballasts Electronic fixed output. PC TC PRO sr 1/2x11 42 W PC PRO compact FL ballasts EL HE PC TC PRO sr 1/2x11 42 W PC PRO compact Product description CELMA Energy Efficiency Index A2 BAT / A2 T Nominal life-time up to 50,000 h (at ta 50 C with a failure rate max. 0.2 % per

More information

FLT5A FLT5A. abc. abc. Thermometer User Guide. Thermometer User Guide. Internet:

FLT5A FLT5A. abc. abc. Thermometer User Guide. Thermometer User Guide. Internet: abc instruments international FLT5A Thermometer Land Instruments International Dronfield, S18 1DJ England Telephone: (1246) 417691 Facsimile: (1246) 41585 Email: infrared.sales@landinst.com Internet: www.landinst.com

More information

INSTALLATION INSTRUCTIONS FRONT PLOW MOUNT KIT Part Number: Application: Polaris Sportsman 400, 500, 800

INSTALLATION INSTRUCTIONS FRONT PLOW MOUNT KIT Part Number: Application: Polaris Sportsman 400, 500, 800 WARN INDUSTRIES, INC. 12900 S.E. Capps Road, Clackamas, OR USA 97015-8903, 1-503-722-1200, FAX: 1-503-722-3000 Customer Service: 1-800-543-9276 Dealer Locator Service: 1-800-910-1122 International Sales/Customer

More information

Performance. Standards. Technical data

Performance. Standards. Technical data ilos Loadbreak disconnectors for wall mounting ilos H up to 5 ilos 3 up to ilos 4 up to Order codes pplications pprovals / Marking ilos H34 ilos H ddon devices Performance Wall mounting Main disconnector,

More information

NM1. Moulded Case Circuit Breaker NM1 P-084. Moulded Case Circuit Breakers. 2. Type designation. 1. General. 3. Classification N M 1- /

NM1. Moulded Case Circuit Breaker NM1 P-084. Moulded Case Circuit Breakers. 2. Type designation. 1. General. 3. Classification N M 1- / P0. Type designation N M / Type of Npole for P breaker* pplication: lank: for power distribution; : for motor protection elease type and accessory code (please refer to table on page 9) Number of poles

More information

INSTALLATION INSTRUCTIONS ATV Plow Blade Part Number: (50 ), (54 ), or (60 ) Application: All Terrain Vehicles

INSTALLATION INSTRUCTIONS ATV Plow Blade Part Number: (50 ), (54 ), or (60 ) Application: All Terrain Vehicles INSTALLATION INSTRUCTIONS ATV Plow Blade Part Number: 78950 (50 ), 78954 (54 ), or 78960 (60 ) Application: All Terrain Vehicles Your safety, and the safety of others, is very important. To help you make

More information

Operating Instructions for Digital Manometer. Model: MAN-SD

Operating Instructions for Digital Manometer. Model: MAN-SD Operating Instructions for Digital Manometer Model: MAN-SD 1. Contents 1. Contents...2 2. Note...3 3. Instrument Inspection...3 4. Regulation Use...4 5. Operating Principle...4 6. Mechanical Connection...5

More information

Richter Optica. Instructions for Model: S850 Stereo Zoom Microscope

Richter Optica. Instructions for Model: S850 Stereo Zoom Microscope Richter Optica info@richter-optica.com Instructions for Model: S850 Stereo Zoom Microscope Microscope Head Focus Knob Stage Clips Zoom Knob C-Mount Adapter Eyepiece Focusing Holder Focusing Holder Set

More information

MODEL: R7K4FML3. Remote I/O R7K4F Series. POWER INPUT DC power R: 24 V DC (Operational voltage range: ±10 %; ripple 10 %p-p max.)

MODEL: R7K4FML3. Remote I/O R7K4F Series. POWER INPUT DC power R: 24 V DC (Operational voltage range: ±10 %; ripple 10 %p-p max.) Remote I/O R7KF Series I/O MODULE (-III) POWER INPUT DC power R: V DC (Operational voltage range: ±0 %; ripple 0 %p-p max.) 0 (8.7). (.) 7(.8) mm (inch) [] OPTIONS (multiple selections) Output data read

More information

HDF series - PARALLEL GRIPPER

HDF series - PARALLEL GRIPPER Operation specification and Ordering expression Internal structure DS Angular DM 0 Angular Specification ore size Type of operation Fluid Pressure range Range of service temperature kgf/cm (kpa) Max. operation

More information

What You Need to Get Started INSTALLATION GUIDE

What You Need to Get Started INSTALLATION GUIDE INSTALLATION GUIDE SBS-96F SHIELDED BACKSHELL This guide describes how to assemble and install the SBS-96F shielded backshell with low-voltage SCXI modules, VXI-DAQ modules, or low-voltage TBX terminal

More information

1/4 Square, Single-Turn, Through-Hole Sealed Cermet Trimmers. Environmental

1/4 Square, Single-Turn, Through-Hole Sealed Cermet Trimmers. Environmental TOCOS POTENTIOMETERS 1/4 Square, Single-Turn, Through-Hole Sealed Cermet Trimmers Features 1/4 square, single-turn, through-hole, sealed cermet trimmers Top and side adjust styles available Larger diameter

More information

Experiment AM Angular Momentum

Experiment AM Angular Momentum Experiment AM Angular Momentum Introduction If an object, e.g., a heavy ball, comes straight at you and you catch it, you may stagger back while exerting the impulse -- some force for some time -- needed

More information

Low Inductance Ceramic Capacitor (LICC)

Low Inductance Ceramic Capacitor (LICC) Low Inductance Ceramic Capacitor (LICC) LICC(Low Inductance Ceramic Capacitor) is a kind of MLCC that is used for decoupling in High Speed IC. The termination shape of LICC is different from that of MLCC.

More information

E6C-N. Ideal for Out-of-step Detection of Stepping Motors and Position Control of Rotors and Unloaders

E6C-N. Ideal for Out-of-step Detection of Stepping Motors and Position Control of Rotors and Unloaders Multi-turn High-precision Encoder Ideal for Out-of-step Detection of Stepping Motors and Position Control of Rotors and Unloaders Reset function for easy origin alignment when built-into equipment. Multi-turn

More information

Proximity Sensor Ideal for High Temperatures and Cleaning Processes. Applicable to 120 C

Proximity Sensor Ideal for High Temperatures and Cleaning Processes. Applicable to 120 C ASH & ALAIN INDIA PVT LTD S-00, F.I.E.E., Okhla Industrial Area, Phase-ii, New Delhi-000(India) Tel : 0-797575 Fax : 0-79757 E-mail : sales@ashalain.com Proximity Ideal for High Temperatures and Cleaning

More information

Digital display Pressure range ON/OFF output Linear output Model No Positive pressure 0 to 98 kpa (0 to 1 kgf/cm 2 ) NPN open collector o 1 to o5

Digital display Pressure range ON/OFF output Linear output Model No Positive pressure 0 to 98 kpa (0 to 1 kgf/cm 2 ) NPN open collector o 1 to o5 Pressure Sensor E8CC with Built-in Microcomputer and Digital Display and New E8CB General-purpose Model Withstands a of 490 kpa (5 kgf/cm 2 ) and highly reliable. Incorporates a two-turn adjuster ensuring

More information

Precision Ball Screw/Spline

Precision Ball Screw/Spline 58-2E Models BNS-A, BNS, NS-A and NS Seal Outer ring Shim plate Seal Spline nut Seal Collar Shim plate Seal End cap Ball Outer ring Ball screw nut Outer ring Ball Retainer Retainer Outer ring Point of

More information

w w w. i n t e l l i g e n t a c t u a t o r. d e

w w w. i n t e l l i g e n t a c t u a t o r. d e GB SCARA ROBOT w w w. i n t e l l i g e n t a c t u a t o r. d e 0.2 400 IX-NNW70(7040) 0.2 400 IX-NNW80(8040) (inverse) T(U)NN TNN UNN IX-T(U)NN301 IX-T(U)NN31 IX-H(I)NN0 (inverse) HNN IX-H(I)NN60 H(I)NN

More information

Blower Motor 3P Connector

Blower Motor 3P Connector 1. Scope Blower Motor P Connector 1.1 Content This specification covers the requirements for product performance, test methods and quality assurance provisions of Blower Motor P connector. Applicable product

More information

Peltier Application Note

Peltier Application Note Peltier Application Note Early 19th century scientists, Thomas Seebeck and Jean Peltier, first discovered the phenomena that are the basis for today s thermoelectric industry. Seebeck found that if you

More information

Specifications. Performance. Mechanical Properties. Optional Accessories SR50. Saddle (CA 10B) (Option) Mount Base. LCR-B-5KNS7 to 50KNS7

Specifications. Performance. Mechanical Properties. Optional Accessories SR50. Saddle (CA 10B) (Option) Mount Base. LCR-B-5KNS7 to 50KNS7 LR--S7 Tension Meter Load ell 5 to 0 kn TRNSURS igh safe overload rating of 0% max. Mechanical stopper activating against overloads of 1% to 0% ermetically sealed structure with inert gas filled in ighly

More information

Masterpact. Installation recommendations

Masterpact. Installation recommendations 90 Installation recommendations Presentation Functions and characteristics 9 Dimensions and connection 5 Electrical diagrams 8 Operating conditions 92 Installation in switchboard 9 Door interlock catch

More information

MLCC APPLICATION GUIDE

MLCC APPLICATION GUIDE MLCC APPLICATION GUIDE 1/10 No. Process Condition 1 Operating Condition (Storage) 1) The capacitor must be stored in an ambient temperature between 5 ~ 40 with a relative humidity of 20 ~ 70%. The products

More information

Power Resistors, for Mounting onto a Heatsink Thick Film Technology

Power Resistors, for Mounting onto a Heatsink Thick Film Technology RCH Manufactured in cermet thick fi lm technology, these power resistors exhibit remarkable characteristics and the series includes 4 types ranging from 5 W to 50 W Designed to be mounted onto a heatsink,

More information

Valve Products ADEX Series Valves

Valve Products ADEX Series Valves atalog 000-2US X alves X is a miniature low power consumption solenoid valves, ideal for powering small to mid-sized pneumatic actuators used in automation and process applications. X's versatility is

More information

3mm Surface Mount, Single-Turn, Sealed Cermet Trimmers

3mm Surface Mount, Single-Turn, Sealed Cermet Trimmers TOCOS POTENTIOMETERS 3mm Surface Mount, Single-Turn, Sealed Cermet Trimmers RoHS Compliant IMPROVED DESIGN Pb-Free and Cd-Free Features 3mm square SMD, single-turn, sealed cermet trimmers Available in

More information

CFP PIANO SWITCHES (FULL PITCH) FEATURES APPLICATIONS PART NUMBER DESIGNATION C F P T B. RoHS compliant

CFP PIANO SWITCHES (FULL PITCH) FEATURES APPLICATIONS PART NUMBER DESIGNATION C F P T B. RoHS compliant RoHS compliant INTERNA STRUCTURE FEATURES RoHS compliant High-reliability 1 Part name Cover Slider Housing Material Polyamide Flammability U9V- Slider contact APPICATIONS Communication devices, Air-conditioning

More information

E8EB-N0C2B E8EB-N0B2B

E8EB-N0C2B E8EB-N0B2B Slim Sensor CSM DS_E 1 Ideal for Workpiece Position and Original Checking The to 1 kpa model can be used for workpiece position checking. The to 1MPa model is ideal for original pressure checking. Degree

More information

Low-profile Master Type (Slim Type) The thinnest possible body contributes to reduced size, height and weight of the set product

Low-profile Master Type (Slim Type) The thinnest possible body contributes to reduced size, height and weight of the set product RS NS Low-profile Master Type (Slim Type) The thinnest possible body contributes to reduced size, height and weight of the set product Typical Specifications Items Specifications tolerance ±0% Maximum

More information

BASE. Rotary limit switch. OptiOnS. FEAtuRES. CERtiFiCAtiOnS

BASE. Rotary limit switch. OptiOnS. FEAtuRES. CERtiFiCAtiOnS Rotary limit switch BASE Rotary limit switch used to control and measure the movement of industrial machines. Its compact size make it suitable for use in narrow spaces. FEAtuRES It consists of a gear

More information

Lexium integrated drives

Lexium integrated drives Presentation GBX planetary gearbox Presentation In many cases the axis controller requires the use of a planetary gearbox for adjustment of speed of rotation and torque; the accuracy required by the application

More information

Redline Unibis : the solution Circuit protection

Redline Unibis : the solution Circuit protection 2 circuits in 1 mo Redline Unibis : the solution ircuit protection Unibis compact Ms are one of the latest introductions in the Redline range and are developed to reduce the size of the distribution board

More information

User friendly mm type, available in a wide variety. Typical Specifications. Rating (max.) Rating (min.) Initial contact resistance

User friendly mm type, available in a wide variety. Typical Specifications. Rating (max.) Rating (min.) Initial contact resistance SKHH 6mm Square ( ) Product Line Top push type Product SKHHAJA00 SKHHALA00 SKHHAQA00 SKHHAKA00 SKHHAMA00 SKHHARA00 SKHHCQA00 SKHHCRA00 SKHHBVA00 SKHHBWA00 SKHHBYA00 SKHHANA00 SKHHAPA00 SKHHBSA00 SKHHDTA00

More information

Electron Microscopy Sciences INSTRUCTION MANUAL. Stereo Microscopes Non-illuminated Stands

Electron Microscopy Sciences INSTRUCTION MANUAL. Stereo Microscopes Non-illuminated Stands Electron Microscopy Sciences 1 INSTRUCTION MANUAL Stereo Microscopes Non-illuminated Stands Model GL7-207: Binocular, 6.5:1 Zoom Ratio 10X to 65X, smooth ball bearing construction and Model GL7-307: Trinocular,

More information

TEA10402V15A0 Engineering Specification

TEA10402V15A0 Engineering Specification TEA10402V15A0 Engineering 1. Scope This specification is applied to electrostatic discharge (ESD) protection. It is designed to protect the high-speed data lines against ESD transients. It has very low

More information

ISWA/ISPWA SPLASH-PROOF SINGLE-AXIS ROBOT.

ISWA/ISPWA SPLASH-PROOF SINGLE-AXIS ROBOT. ISW/ISPW SPLSH-PROO SINGL-XIS ROOT www.intelligentactuator.com irst in the industry! The lineup of splash-proof sliders has been extended. You can now choose a splash-proof actuator of desired size to

More information