CATALOG THE PNEUMATICS SOLUTIONS. customer-focused. North American Edition
|
|
- Candice Hudson
- 6 years ago
- Views:
Transcription
1 THE PNEUMTIC CTLOG North merican Edition customerfocused OLUTION Courtesy of teven Engineering, Inc.! 230 Ryan Way, outh an Francisco, C ! Main Office: (650) ! Outside Local rea: (800) !
2 Courtesy of teven Engineering, Inc.! 230 Ryan Way, outh an Francisco, C ! Main Office: (650) ! Outside Local rea: (800) ! CTUTOR P RODUCT ELECTOR P GE 1.1 V LVE P RODUCT ELECTOR P GE 2.1 F LOW C ONTROL E QUIPMENT P RODUCT ELECTOR P GE 3.1 F ITTING ND T UING P RODUCT ELECTOR P GE 4.1 IR P REPRTION P RODUCT ELECTOR P GE 5.1 V CUUM P RODUCT ELECTOR P GE 6.1 I NTRUMENTTION P RODUCT ELECTOR P GE 7.1
3 Courtesy of teven Engineering, Inc.! 230 Ryan Way, outh an Francisco, C ! Main Office: (650) ! Outside Local rea: (800) ! Compressed ir afety Compressed air represents a source of considerable potential energy and, as with electricity, precautions must be taken to prevent accidents. Compressed air should never impinge upon the body. Ports, pipes etc. must never be blocked by hand. efore connecting any pneumatic equipment to compressed air supply, mountings, fittings, pipework, and electrical connections should be checked for security, and all plastic protection plugs removed. No pipework alterations or removal of fittings should be attempted with air supplies connected. ir and electrical supplies must be disconnected before any adjustment, maintenance or dismantling of machinery is started. The maximum allowable operating pressures, temperature, loads etc. must be strictly observed. Refer to individual catalogs for this information, and any other operating or application limitations. When fluorine rubber seals ( Viton used on high temperature equipment) are subjected to temperatures in excess of 400 C / 750ºF the Fluoroelastomer decomposes. The products of decomposition are extremely hazardous including Hydrofluoric cid. Following any fire, or high temperature accident, if charred or black sticky seals are found and the presence of Viton is suspected, do not touch the equipment, and contact MC Customer ervice for advice. Compressed ir FETY COMPREED IR FETY CTUTOR 1. ir supply to any pneumatic actuator must be isolated and the supply lines to each cylinder port exhausted before adjusting, dismounting or dismantling. 2. ctuators, being moving parts, must be safe guarded. Consult MC Customer ervice. 3. Electrical installation of auto switches must be undertaken by a person competent to undertake electrical work. 4. The security of all mountings, attachments and air connections must be checked before commissioning or restoring the air supply after adjustment or maintenance. 5. Cushion screws on air cushioned cylinders should be adjusted with air supply isolated from the actuators, to avoid any possibility of adjusters blowing out under pressure.
4 MC NORTH MERIC CTUTOR 1.a CTUTOR ERIE PGE N UMER NCJ2 1.1 L INER CTUTOR / IR C YLINDER CJP 1.17 L INER CTUTOR / PIN C YLINDER NCJP 1.18 L INER CTUTOR / PIN C YLINDER CG L INER CTUTOR / IR C YLINDER NCG 1.32 L INER CTUTOR / IR C YLINDER NCM 1.46 TINLE TEEL L INER CTUTOR / IR C YLINDER C L INER CTUTOR / IR C YLINDER NC L INER CTUTOR / IR C YLINDER CL 1.86 F INE L OCK IR C YLINDER NCQ2/CQ L INER CTUTOR / COMPCT IR C YLINDER (J FLOTING J OINT: PGE 1.124) Courtesy of teven Engineering, Inc.! 230 Ryan Way, outh an Francisco, ORDER C LINE! Main Office: (650) ! Outside Local rea: (800) ! Castle Hill NW...Tel: (02) Fax: (02) Tel: Fax:
5 Courtesy of teven Engineering, Inc.! 230 Ryan Way, outh an Francisco, C ! Main Office: (650) ! Outside Local rea: (800) ! 1.b MC NORTH MERIC CTUTOR ERIE PGE N UMER CX / CXW L INER CTUTOR / DUL R OD C YLINDER NCX L INER CTUTOR / LIDE U NIT CE C YLINDER CLE ND P REET O UTPUT C ONTROLLER C L INER CTUTOR / IO IR C YLINDER MGG L INER CTUTOR / GUIDE C YLINDER MGP L INER CTUTOR / COMPCT G UIDE C YLINDER MGQ L INER CTUTOR / COMPCT G UIDE C YLINDER NCY L INER CTUTOR / RODLE C YLINDER MY L INER CTUTOR / RODLE C YLINDER MECHNICL J OINT T YPE MY1M L INER CTUTOR / RODLE C YLINDER MECHNICL J OINT T YPE MY1C L INER CTUTOR / RODLE C YLINDER MECHNICL J OINT T YPE
6 Courtesy of teven Engineering, Inc.! 230 Ryan Way, outh an Francisco, C ! Main Office: (650) ! Outside Local rea: (800) ! MC NORTH MERIC CTUTOR 1.c ERIE PGE N UMER MY1H L INER CTUTOR / RODLE C YLINDER MECHNICL J OINT T YPE ML L INER CTUTOR / TROKE R EDING R ODLE C YLINDER W ITH RKE MXF L OW P ROFILE LIDE TLE MX P RECIION LIDE TLE MXH P RECIION LIDE TLE MXP P RECIION LIDE TLE MXQ P RECIION LIDE TLE MXU C OMPCT LIDE TLE MXW L ONG TROKE LIDE TLE RQ L INER CTUTOR / TOPPER C YLINDER RH H EVY D UTY TOPPER C YLINDER
7 Courtesy of teven Engineering, Inc.! 230 Ryan Way, outh an Francisco, C ! Main Office: (650) ! Outside Local rea: (800) ! 1.d MC NORTH MERIC CTUTOR ERIE PGE N UMER MK R OTRY C LMP C YLINDER MRQ R OTRY C YLINDER NCR R OTRY CTUTOR RCK ND P INION T YPE NCR R OTRY CTUTOR VNE T YPE NCR1W R OTRY CTUTOR VNE T YPE MQ R OTRY TLE MU R OTRY TLE MHQ2 / MHC IR G RIPPER MHL IR G RIPPER WIDE T YPE MHQ IR G RIPPER PRLLEL I NTERNL/EXTERNL H OLDING T YPE MHR R OTRY CTUTED IR C HUCK
8 MC NORTH MERIC CTUTOR 1.e ERIE PGE N UMER MH P RECIION IR C HUCK MHT T OGGLE T YPE IR C HUCK MHW IR C HUCK 180º NGULR G RIPPER MHY C M T YPE IR C HUCK 180º NGULR G RIPPER NR HOCK ORER R HOCK ORER RQ HOCK ORER T HRED C ODE 1.77 Courtesy of teven Engineering, Inc.! 230 Ryan Way, outh an Francisco, ORDER C LINE! Main Office: (650) ! Outside Local rea: (800) ! Castle Hill NW...Tel: (02) Fax: (02) Tel: Fax:
9 Courtesy of teven Engineering, Inc.! 230 Ryan Way, outh an Francisco, C ! Main Office: (650) ! Outside Local rea: (800) ! 1.f TECHNICL INFORMTION CTUTOR IR CYLINDER FORCE GUIDE Cylinder Forces shown in the tables below are for both Extension and Retraction types. Lines in bold type show Extension Forces, using the full piston area. Lines in italic type show Retraction forces with various ize Piston Rods. Inches Rod Diameter Inches Effective rea Inch Pressure Differential cross Cylinder Ports (PI) lbsf Pressures along the top of the tables do not represent air supply pressure; they are differential pressures across the two cylinder parts; in practice, the air supply line must supply another 5% of pressure to make up for cylinder loss and must supply another 25% ~ 50% additional pressure to make up for flow losses in lines and valving so the cylinder will have sufficient travel speed. For pressures not shown, use the effective areas in the third column as power factors, multiply effective area times differential pressure to obtain theoretical cylinder force. mm Rod Diameter mm Effective rea Pressure Differential cross Cylinder Ports (ar) Force Kgf
10 L INER CTUTOR: IR C YLINDER ERIE NCJ2 ERIE NCJ2 ORE IE Ø Double cting ingle Rod / Double Rod ingle pring Return / Extend Compact and Lightweight uto witch ensing Optional Non Rotating Piston Rod Optional High ccuracy Mounting M DE I N U H O W T O O R D E R NCJ2 TNDRD D OULE CTING INGLE R OD C YLINDER NC UTO WITCH C PLE Without (asic) D With uiltin Magnet NC J2 J2 Y M O L Double cting/ingle Rod PECIL O PTION X6 High Temperature X7 Low Temperature X9 Low peed Operation ingle cting/pring Return Double cting/ingle Rod NonRotating M OUNTING asic D Double Clevis (Except ø6) L xial Foot F Rod ide Flange T ECHNICL PECIFICTION TD TROKE/HUNDREDTH O F N I NCH 050, 100, 150, , 200, 300, 400, 500, , 100, 150, 200, 300, 400, 500, 600, 700, 800 P ORT L OCTION O N H ED C OVER ymbol : ø6 ø10, ø16 R InLine InLine Perpendicular Fluid ir Proof Pressure 1MPa / 145 PI MaxImum Operating Pressure 0.7MPa / 100 PI Minimum Operating ø6 0.1MPa / 17 PI Pressure ø10, ø MPa / 8.5 PI mbient and Fluid Temperature 10 C~+70 C / 14~158ºF Cushion Rubber Cushion (tandard) Lube (Nonlube) troke Tolerance mm 0inch Piston peed 2~29.5 in/s (50~750mm/s) PPLICLE UTO WITCH ee NCJ2 ccessories ection llowable Kinetic Energy ø6 ø10 ø lbf in (0.12kgf cm) 0.30lbf in (0.35kgf cm) 0.78lbf in (0.9kgf cm) N UMER O F WITCHE 2 Pieces 1 Piece n n Pieces PRT NUMER OF MOUNTING RCKET Mounting racket (mm) Foot NCJL006 NCJL010 NCJL016 Flange NCJF006 NCJF010 NCJF016 D IMENION EE N EXT P GE Courtesy of teven Engineering, Inc.! 230 Ryan Way, outh an Francisco, C ! Main Office: (650) ! Outside Local rea: (800) ! FOR FURTHER TECHNICL DETIL ON THI PRODUCT REQUET CTLOG REFERENCE
11 1.2 L INER CTUTOR: IR C YLINDER ERIE NCJ2 TNDRD D OULE CTING INGLE R OD IC T YPE NCJ2 C D F G 0.57 G H MM No540UNC NN 1/428UNF No640UNF 5/1624UNF No1032UNF 3/824UNF N N T TNDRD D OULE CTING INGLE R OD F OOT T YPE NCJ2L H C D F G 0.57 G H LC LH 0.43 LT LX LY L MM No540UNC NN 1/428UNF N No640UNF 5/1624UNF No1032UNF 3/824UNF 0.49 N T 0.12 X Y FOR FURTHER TECHNICL Courtesy of teven Engineering, Inc.! 230 Ryan Way, outh an Francisco, C ! Main Office: (650) ! Outside Local rea: (800) ! DETIL ON THI PRODUCT REQUET CTLOG REFERENCE
12 L INER CTUTOR: IR C YLINDER ERIE NCJ2 1.3 TNDRD D OULE CTING INGLE R OD R OD IDE F LNGE T YPE NCJ2F C D F FC FT FX FY F G 0.57 G H MM No540UNC NN 1/428UNF N 0.63 No640UNF 5/1624UNF 0.49 No1032UNF 3/824UNF 0.49 N T TNDRD D OULE CTING INGLE R OD D OULE C LEVI T YPE NCJ2D C CD CX D G G H MM No640UNF No1032UNF N N R U Courtesy of teven Engineering, Inc.! 230 Ryan Way, outh an Francisco, C ! Main Office: (650) ! Outside Local rea: (800) ! FOR FURTHER TECHNICL DETIL ON THI PRODUCT REQUET CTLOG REFERENCE
13 1.4 L INER CTUTOR: IR C YLINDER ERIE NCJ2 H O W T O O R D E R NCJ2 TNDRD D OULE CTING D OULE R OD C YLINDER NC NC J2W J2W PECIL O PTION X6 High Temperature X7 Low Temperature PRT NUMER OF MOUNTING RCKET Mounting racket (mm) Foot NCJL006 NCJL010 NCJL016 Flange NCJF006 NCJF010 NCJF016 UTO WITCH C PLE Not witch Capable D witch Capable uiltin Magnet M OUNTING asic L xial Foot F Rod ide Flange ORE IE N UMER O F WITCHE 2 Pieces 1 Piece n n Pieces PPLICLE UTO WITCH ee NCJ2 ccessories ection TD TROKE/HUNDREDTH O F N I NCH 050, 100, 150, , , 100, 150, 200 T ECHNICL PECIFICTION Fluid ir Proof Pressure 1MPa / 145 PI MaxImum Operating Pressure 0.7MPa / 100 PI Minimum Operating ø6 0.14MPa / 21 PI Pressure ø10, ø16 0.1MPa / 14 PI mbient and Fluid Temperature 10 C~+70 C (14~158ºF) Cushion Rubber Cushion (tandard) Lube (Nonlube) troke Tolerance Piston peed llowable Kinetic Energy ø6 ø10 ø mm 2~29.5 in/s (50~750mm/s) 0.10lbf in (0.12kgf cm) 0.30lbf in (0.35kgf cm) 0.78lbf in (0.9kgf cm) TNDRD D OULE CTING D OULE R OD IC T YPE NCJ2W * C D F G 0.57 H MM No540UNC No640UNF NN 1/428UNF 5/1624UNF No1032UNF 3/824UNF N T * In case of uto witches with ø6 ore, add 5mm to and. FOR FURTHER TECHNICL Courtesy of teven Engineering, Inc.! 230 Ryan Way, outh an Francisco, C ! Main Office: (650) ! Outside Local rea: (800) ! DETIL ON THI PRODUCT REQUET CTLOG REFERENCE
14 L INER CTUTOR: IR C YLINDER ERIE NCJ2 1.5 TNDRD D OULE CTING D OULE R OD F OOT T YPE NCJ2WL * C D F G 0.57 H LC LH 0.43 LT LX LY L MM No540UNC NN 1/428UNF N No640UNF 5/1624UNF No1032UNF 3/824UNF 0.49 T 0.12 X Y * In case of uto witches with ø6 ore, add 5mm to and. TNDRD D OULE CTING D OULE R OD F LNGE T YPE NCJ2WF * C D F FC FT FX FY F G 0.57 H MM No540UNC NN 1/428UNF N 0.63 No640UNF 5/1624UNF 0.49 No1032UNF 3/824UNF 0.49 T * In case of uto witches with ø6 ore, add 5mm to and. Courtesy of teven Engineering, Inc.! 230 Ryan Way, outh an Francisco, C ! Main Office: (650) ! Outside Local rea: (800) ! FOR FURTHER TECHNICL DETIL ON THI PRODUCT REQUET CTLOG REFERENCE
15 1.6 L INER CTUTOR: IR C YLINDER ERIE NCJ2 H O W T O O R D E R NCJ2 TNDRD INGLE CTING PRING R ETURN / PRING E XTEND NC J2 NC J2 UTO WITCH C PLE Not witch Capable D witch Capable With uiltin Magnet M OUNTING asic L xial Foot F Rod ide Flange D Double Clevis (Except for ø6) ORE IE TD TROKE/HUNDREDTH O F N I NCH 050, 100, 150, , , 100, 150, 200, 300, 400, 500 CTION pring Return T pring Extend N UMER O F WITCHE 2 Pieces 1 Piece n n Pieces PPLICLE UTO WITCH ee NCJ2 ccessories ection P ORT L OCTION O N H ED C OVER ymbol : ø6 ø10, ø16 R InLine InLine Perpendicular PRT NUMER OF MOUNTING RCKET Mounting racket (mm) Foot NCJL006 NCJL010 NCJL016 Flange NCJF006 NCJF010 NCJF016 T ECHNICL PECIFICTION Fluid ir Proof Pressure 1MPa / 145 PI MaxImum Operating Pressure 0.7MPa / 100 PI Minimum Operating ø6 0.35MPa / 50 PI Pressure ø10, ø MPa / 21 PI mbient and Fluid Temperature 10 C~+70 C / 14~158ºF Cushion Rubber Cushion (tandard) Lube (Nonlube) troke Tolerance Piston peed llowable Kinetic Energy mm 2~29.5 in/s (50~750mm/s) ø6 0.10lbf in (0.12kgf cm) ø lbf in (0.35kgf cm) ø lbf in (0.9kgf cm) D IMENION EE N EXT P GE FOR FURTHER TECHNICL Courtesy of teven Engineering, Inc.! 230 Ryan Way, outh an Francisco, C ! Main Office: (650) ! Outside Local rea: (800) ! DETIL ON THI PRODUCT REQUET CTLOG REFERENCE
16 L INER CTUTOR: IR C YLINDER ERIE NCJ2 1.7 TNDRD INGLE CTING PRING R ETURN IC T YPE NCJ2 C 0.35 D F G H MM No540UNC No640UNF NN 1/428UNF 5/1624UNF No1032UNF 3/824UNF N N TNDRD INGLE CTING PRING R ETURN F OOT T YPE NCJ2L C 0.35 D F G H LC LH LT LX LY L MM NN N N X Y No540UNC 1/428UNF No640UNF 5/1624UNF No1032UNF 3/824UNF TNDRD INGLE CTING PRING R ETURN R OD IDE F LNGE T YPE NCJ2F C D F FC FT FX FY F G H MM NN N N No540UNC 1/428UNF No640UNF 5/1624UNF No1032UNF 3/824UNF * In case of uto witches with ø6 ore, add 5mm to and Courtesy of teven Engineering, Inc.! 230 Ryan Way, outh an Francisco, C ! Main Office: (650) ! Outside Local rea: (800) ! FOR FURTHER TECHNICL DETIL ON THI PRODUCT REQUET CTLOG REFERENCE
17 1.8 L INER CTUTOR: IR C YLINDER ERIE NCJ2 TNDRD INGLE CTING PRING R ETURN D OULE C LEVI T YPE NCJ2D C CD CX D G H MM N N R U No640UNF No1032UNF Note) Clevis Pin Included TNDRD INGLE CTING PRING E XTEND IC T YPE NCJ2 T C D F G 0.57 H MM NN N N T No540UNC 1/428UNF No640UNF 5/1624UNF No1032UNF 3/824UNF TNDRD INGLE CTING PRING E XTEND F OOT T YPE NCJ2L T FOR FURTHER TECHNICL Courtesy of teven Engineering, Inc.! 230 Ryan Way, outh an Francisco, C ! Main Office: (650) ! Outside Local rea: (800) ! DETIL ON THI PRODUCT REQUET CTLOG REFERENCE
18 L INER CTUTOR: IR C YLINDER ERIE NCJ2 1.9 Continued... NCJ2 ingle cting pring Extend Foot Type * C D F G H LC LH LT LX LY L MM NN N N T X Y No540UNC 1/428UNF No640UNF 5/1624UNF No1032UNF 3/824UNF * In case of uto witches with ø6 ore, add 5mm to and TNDRD INGLE CTING PRING E XTEND R OD IDE F LNGE T YPE NCJ2F T * C D F FC FT FX FY F G H MM NN N N T No540UNC 1/428UNF No640UNF 5/1624UNF No1032UNF 3/824UNF * In case of uto witches with ø6 ore, add 5mm to and. TNDRD INGLE CTING PRING E XTEND D OULE C LEVI T YPE NCJ2D T *Clevis Pin Included C CD CX D G H MM N N R U No640UNF No1032UNF Courtesy of teven Engineering, Inc.! 230 Ryan Way, outh an Francisco, C ! Main Office: (650) ! Outside Local rea: (800) ! FOR FURTHER TECHNICL DETIL ON THI PRODUCT REQUET CTLOG REFERENCE
19 L INER CTUTOR: IR C YLINDER ERIE NCJ2 H O W T O O R D E R NCJ2 NONROTTING D OULE CTING INGLE R OD C YLINDER NC NC J2K J2K PRT NUMER OF MOUNTING RCKET Mounting racket (mm) Foot NCJL010 NCJL016 Flange NCJF010 NCJF016 UTO WITCH C PLE Not witch Capable D witch Capable With uiltin Magnet M OUNTING asic D Double Clevis L xial Foot F Rod ide Flange ORE/TD TROKE(HUNDREDTH O F N I NCH) , 200, 300, 400, 500, , 100, 150, 200, 300, 400, 500, 600, 700, 800 N UMER O F WITCHE 2 Pieces 1 Piece n n Pieces PPLICLE UTO WITCH ee NCJ2 ccessories ection P ORT L OCTION O N H ED C OVER R InLine Perpendicular T ECHNICL PECIFICTION Fluid Proof Pressure MaxImum Operating Pressure Minimum Operating Pressure mbient and Fluid Temperature Cushion Lubrication troke Tolerance ir 1MPa / 145 PI 0.7MPa / 100 PI 0.05MPa / 8.5 PI 10 C~+70 C / 14~160ºF Rubber Cushion (tandard) (Nonlube) mm N ONROTTING D OULE CTING INGLE R OD IC T YPE NCJ2K NonRotating ccuracy ø10: +1.5 O / ø16: +1 O Piston peed 2~29.5 in/s (50~750mm/s) llowable Kinetic Energy ø lbf in (0.35kgf cm) ø lbf in (0.9kgf cm) C C F G G H K MM NN N N No640UNF 3/824UNF No1032UNF 7/1620UNF D IMENION EE N EXT P GE FOR FURTHER TECHNICL Courtesy of teven Engineering, Inc.! 230 Ryan Way, outh an Francisco, C ! Main Office: (650) ! Outside Local rea: (800) ! DETIL ON THI PRODUCT REQUET CTLOG REFERENCE
20 L INER CTUTOR: IR C YLINDER ERIE NCJ N ONROTTING D OULE CTING INGLE R OD F OOT T YPE NCJ2KL C C F G G H K LC LH LT LX LY L MM NN N N X Y No640UNF 3/824UNF No1032UNF 7/1620UNF N ONROTTING D OULE CTING INGLE R OD R OD IDE F LNGE T YPE NCJ2KF C C F FC FT FX FY F G G H K MM NN N N No640UNF 3/824UNF No1032UNF 7/1620UNF N ONROTTING D OULE CTING INGLE R OD D OULE C LEVI T YPE NCJ2KD C C CD CX G G H K MM N N R U No640UNF No1032UNF Courtesy of teven Engineering, Inc.! 230 Ryan Way, outh an Francisco, C ! Main Office: (650) ! Outside Local rea: (800) ! FOR FURTHER TECHNICL DETIL ON THI PRODUCT REQUET CTLOG REFERENCE
21 1.12 L INER CTUTOR: IR C YLINDER ERIE NCJ2 H O W T O O R D E R NCJ2 NONROTTING INGLE CTING PRING R ETURN / PRING E XTEND C YLINDER NC NC J2K J2K PRT NUMER OF MOUNTING RCKET Mounting racket (mm) Foot NCJL010 NCJL016 Flange NCJF010 NCJF016 UTO WITCH C PLE Not witch Capable D witch Capable With uiltin Magnet M OUNTING asic D Double Clevis L xial Foot F Rod ide Flange ORE IE ø10 ø16 TD TROKE/HUNDREDTH O F N I NCH , , 100, 150, 200, 300, 400, 500 N UMER O F WITCHE 2 Pieces 1 Piece n n Pieces PPLICLE UTO WITCH ee NCJ2 ccessories ection P ORT L OCTION O N H ED C OVER R InLine Perpendicular CTION pring Return T pring Extend T ECHNICL PECIFICTION Fluid Proof Pressure MaxImum Operating Pressure Minimum Operating Pressure mbient and Fluid Temperature Cushion Lubrication troke Tolerance ir 1MPa / 145 PI 0.7MPa / 100 PI 0.14MPa / 21 PI 10 C~+70 C / 14~160ºF Rubber Cushion (tandard) (Nonlube) mm NonRotating ccuracy ø10: +1.5 O / ø16: +1 O Piston peed 2~29.5 in/s (50~750mm/s) llowable Kinetic Energy ø lbf in (0.35kgf cm) ø lbf in (0.9kgf cm) N ONROTTING INGLE CTING PRING R ETURN IC T YPE NCJ2K C C F G H K MM NN N No640UNF 3/824UNF No1032UNF 7/1620UNF 0.21 N MORE DIMENION EE N EXT P GE FOR FURTHER TECHNICL Courtesy of teven Engineering, Inc.! 230 Ryan Way, outh an Francisco, C ! Main Office: (650) ! Outside Local rea: (800) ! DETIL ON THI PRODUCT REQUET CTLOG REFERENCE
22 L INER CTUTOR: IR C YLINDER ERIE NCJ N ONROTTING INGLE CTING PRING R ETURN F OOT T YPE NCJ2KL C C F H K LC LH LT LX LY L MM NN N N X Y No640UNF 3/824UNF No1032UNF 7/1620UNF N ONROTTING INGLE CTING PRING R ETURN R OD IDE F LNGE T YPE NCJ2KF C C F G FC FT FX FY F H K MM NN N N No640UNF 3/824UNF No1032UNF 7/1620UNF N ONROTTING INGLE CTING PRING R ETURN D OULE C LEVI T YPE NCJ2KD C C CD CX G H K MM N N R U No640UNF No1032UNF Courtesy of teven Engineering, Inc.! 230 Ryan Way, outh an Francisco, C ! Main Office: (650) ! Outside Local rea: (800) ! FOR FURTHER TECHNICL DETIL ON THI PRODUCT REQUET CTLOG REFERENCE
23 1.14 L INER CTUTOR: IR C YLINDER ERIE NCJ2 N ONROTTING INGLE CTING PRING E XTEND IC T YPE NCJ2K T C C F G H K MM NN N N No640UNF 3/824UNF No1032UNF 7/1620UNF N ONROTTING INGLE CTING PRING E XTEND F OOT T YPE NCJ2KL T C C F G H K LC LH LT LX LY L MM NN N N X Y No640UNF 3/824UNF No1032UNF 7/1620UNF N ONROTTING INGLE CTING PRING E XTEND R OD IDE F LNGE T YPE NCJ2KF T CCEORIE EE N EXT P GE C C F FC FT FX FY F G H K MM NN N N No640UNF 3/824UNF No1032UNF 7/1620UNF FOR FURTHER TECHNICL Courtesy of teven Engineering, Inc.! 230 Ryan Way, outh an Francisco, C ! Main Office: (650) ! Outside Local rea: (800) ! DETIL ON THI PRODUCT REQUET CTLOG REFERENCE
24 L INER CTUTOR: IR C YLINDER ERIE NCJ N ONROTTING INGLE CTING PRING E XTEND D OULE C LEVI T YPE NCJ2KD T C C CD CX G H K MM N N R U No640UNF No1032UNF H O W T O O R D E R ERIE NCJ2 HIGH TEMPERTURE REITNT CYLINDER ingle Rod W Double Rod NCJ2 M OUNTING ORE IE X6 OPTION X6 TROKE T ECHNICL PECIFICTION pplicable Cylinder ø6, ø10, ø16 ction Double cting (ingle/double Rod) mbient and Fluid Temperature 10 C~+150 C / 14~300ºF Packing Material Fluorocarbon Rubber pecial Grease Teflon based Grease Mounting Type asic, Foot, Rod ide Flange H O W T O O R D E R ERIE NCJ2 LOW TEMPERTURE REITNT CYLINDER ingle Rod W Double Rod NCJ2 M OUNTING ORE IE X7 OPTION X7 TROKE T ECHNICL PECIFICTION pplicable Cylinder ø6, ø10, ø16 ction Double cting (ingle/double Rod) mbient and Fluid Temperature 55 C~+70 C / 67~160ºF Packing Material NR pecial Grease Teflon based Grease Mounting Type asic, Foot, Rod ide Flange H O W T O O R D E R ERIE NCJ2 LOW FRICTION CYLINDER ingle Rod W Double Rod NCJ2 X9 OPTION M OUNTING ORE IE X9 TROKE T ECHNICL PECIFICTION pplicable Cylinder ction mbient and Fluid Temperature Piston Velocity ø6, ø10, ø16 Double cting (ingle/double Rod) 55 C~+70 C / 67~160ºF 10 ~ 50 mm/s (4 ~ 2in/s) Mounting Type asic, xial Foot, Rod ide Flange LO VILLE: X13 OPTION LOW PEED XC22 VITON EL P LEE CONULT MC CUTOMER ERVICE Courtesy of teven Engineering, Inc.! 230 Ryan Way, outh an Francisco, C ! Main Office: (650) ! Outside Local rea: (800) ! FOR FURTHER TECHNICL DETIL ON THI PRODUCT REQUET CTLOG REFERENCE
25 1.16 L INER CTUTOR: IR C YLINDER ERIE NCJ2 CCEORIE ERIE NCJ2 IR CYLINDER CCEORIE UTO WITCHE Note: Prewired witches with 3/4 Pin Connectors available, please consult MC Customer ervice NCY2 CCEORIE PRT NO PPLICLE DIMETER MODEL LED WIRE ENTRY PPLICTION LOD VOLTGE MX LOD CURRENT/LOD CURRENT RNGE Rear Clevis Pin Double Rod Clevis Rod Jam Nut Mounting Nut NCDJ010 NCDJ016 NYJ010 NYJ016 JM005 JM006 JM02 JM025 JM03 JM04 ø10 ø16 ø10 ø16 ø8 ø10 ø16 ø8 ø10 ø16 DC73 DC76 DC80 DC73C DC80C DH71 DH72 Grommet Grommet Grommet Connector Connector Grommet Grommet PLC PLC PLC PLC PLC PLC PLC 24 VDC 110VC 4 ~ 8 VDC 24V C/DC or less 48V C/DC 100V C/DC 24 VDC 24V C/DC or less 28 VDC 28 VDC 5 ~ 40 m 5 ~ 20 m 20 m 50m 40m 20m 5 ~ 40 m 50 m 40 m 80 m DH7 Grommet 24VDC 24 VDC 5 ~ 40 m DH7C Connector PLC (10~28 VDC) CCEORIE ERIE NCJ2 WITCH ND ORE IE ø6 ø10 ø16 PRT NO J2006 J2010 J2016 CCEORIE ERIE NCJ2 RER CLEVI PIN CCEORIE ERIE NCJ2 PITON ROD CLEVI PRT NO NCDJ010 NCDJ016 ORE IE ød L Note) includes 2 Retaining Ring ød e M t CCEORIE ERIE NCJ2 MOUNTING NUT CCEORIE ERIE NCJ2 ROD JM NUT PRT NO NYJ010 NYJ016 ORE IE R NX ønd U MM L L NO640UNF NO1032UNF Note) includes Rod Jam Nut, Clevis Pin and 2 Retaining Rings PRT NO JM025 JM03 JM04 ORE IE C D /428UNF /1624UNF /824UNF PRT NO JM005 JM006 JM02 ORE IE 0.38 C D UNC 640UNF UNF FOR FURTHER TECHNICL Courtesy of teven Engineering, Inc.! 230 Ryan Way, outh an Francisco, C ! Main Office: (650) ! Outside Local rea: (800) ! DETIL ON THI PRODUCT REQUET CTLOG REFERENCE
Free Mount Cylinder Double Acting, Double Rod. ø6, ø10, ø16, ø20, ø25, ø32. How to Order. Action. D Double acting. Standard stroke (mm)
ouble Acting, ouble Rod eries CUW ø, ø, ø1, ø, ø2, ø How to Order CUW With auto switch CUW MBW Built-in magnet ouble rod 1 2 mm mm 1 mm mm 2 mm mm Action ouble acting Number of auto switches Nil 2 pcs.
More informationUniversal type Port size AS13 1F-M3. M3 x 0.5 M5 x 0.8 AS23 1F-01 AS23 1F-02 AS33 1F-02 AS33 1F-03 AS43 1F-04 R 1/8 R 1/4 R 1/4 R 3/8 R 1/2
Minimizes installation time and cost Reduces the mounting height and enables compact machinery design. Effective area is larger than the former model. Tube swivels 0 Universal type permits 0 piping swivel.
More informationFeatures: Specification. Model. Acting type. Tube I.D.(mm) Port size. No. of port. Medium Operating pressure range
& F * eries to 3mm ore Features: qual forces on both ends of the piston. Force connection direct, torque safe. agnetic piston standard. % spacesavings. nd caps with 3 air connections and adjustable cushioning.
More informationø6, ø10, ø15, ø20, ø25, ø32, ø40, ø50, ø63 How to Order Switch rail Nil Standard stroke Refer to page 12 for standard stroke.
Magnetically Coupled Rodless Cylinder: Direct Mount ype Series ø, ø, ø, ø, ø, ø, ø, ø0, ø Direct mount type mm mm mm mm mm mm mm 0 0 mm mm 00 MB Piping type Both sides piping type Centralized piping type
More informationHow to Order M9BW. Action D Double acting. Load voltage M9NWV M9NW 5 V, 12 V 5 V, 24 V 12 V M9BWV M9BW 12 V 12 V M9NAV M9NA 5 V, 12 V 12 V.
arallel Style Air ripper/-inger Type Series MHS ø1, ø, ø, ø, ø, ø, ø, ø, ø1, ø How to rder Bore size ø1 to ø Number of fingers fingers MHS Bore size 1 1 mm mm mm D MBW Action D Double acting Auto switch
More informationHigh Power Cylinder. RHC Series. ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100. REA REB REC Smooth MQ RHC RZQ D- -X. Low Speed
High Power ylinder RH Series ø, ø, ø3, ø4, ø, ø, ø8, ø RE RE RE RH 34 High power cylinder: cushioning for high speed operation (3 low/medium speed operation with heavy loads The capacity to absorb to times
More informationOur policy is one of continued research and development. We therefore reserve the right to
D/99000, D/99000 ompact cylinders on-magnetic and magnetic piston Double acting Ø 12 to 160 mm ight weight ompact design, which is considerably shorter than IS/VDA or FA equivalent. ow friction characteristics
More informationSlide Bearing Type. ø16, ø20, ø25, ø32, ø40, ø50, ø63. Series MY1M. Simple guide type allows direct mounting of work pieces.
eries MM lide earing Type ø, ø, ø, ø, ø, ø, ø eries MM earing imple guide type allows direct mounting of work pieces. djusting mecanism Maximum llowable Moment/Maximum llowable oad efore Operating eries
More informationBore size: 4, 6, 8, 10. Double acting. Double acting Compressed air Withstanding pressure Ambient temperature Port size
*2 2 2 G 2 V2 /V2 V 2 * * U U G U2 2 U 2 G pecifications troke length ore size ylinder switch specifications escriptions pplications utput method ower voltage oad voltage oad current urrent consumption
More informationLow Profile Slide Table
Low Profile Slide Table Series ø, ø, ø1, ø Low-profile and compact type, air slide table with the construction of guide and cylinder aligned in parallel. Neat appearance Protecting stopper section with
More informationSpecifications. Stroke length. Small direct mounting cylinder MDC2 Series. Port size: M3 (For 4, 6, 8 mm bore) M5 (For 10 mm bore) Descriptions
mall direct mounting cylinder 2 eries ort size: (or,, mm bore) (or mm bore) I symbol ingle acting spring return type ingle acting spring extend type ouble acting VI. pecifications escriptions ore size
More informationM/60210/M Miniature rotary actuators
M/6020/M Miniature rotary actuators Double acting - Magnetic piston - Ø 2 and 20 mm Smooth operation with zero backlash Lightweight ompact envelope dimensions Integral magnets for positional feedback TEHNIL
More information180 Angular Gripper. Series MHY2/MHW2. Cam actuation style is now standardised! 5-241
18 Angular Gripper Cam tyle Rack & Pinion tyle eries MHY2/MHW2 Cam actuation style is now standardised! -21 18 Angular Gripper Cam tyle Rack & Pinion tyle eries MHY2/MHW2 eries MHY/Cam tyle Light and compact
More informationPSA XX - XXXX - X - X - X - X - X
PNEUMTIC SERVO CTUTOR BORE () COMMUNICTION CRD STROKE () ROD END VLVE ENVIRONMENTL PROTECTION OPTIONS MOUNTING PS 325 - XX - XXXX - X - X - X - X - X 3.25 = 325 4.00 = 04 6.00 = 06 8.00 = 08 0.00 = 0 2.00
More informationCKA Series. 3-way jaw thin chuck double acting/single acting. Operational stroke length: 5, 6, 7, 9, 20, 25, 30, 38mm.
G G B A S F J L L H LB N/ S/F Specifications Descriptions Size Cylinder bore size Operating method Working fluid Max. working pressure Min. working pressure Ambient temperature Port size Operational stroke
More informationHow to order. Load voltage 5 V, 12 V 12 V 5 V, 12 V 12 V 5 V, 12 V 12 V
ISO Standards ir Cylinder: Standard Double cting with End of Stroke Cushioning Series CP ø, ø, ø, ø, ø, ø0, ø With au switch 0 CPS 0 J W CPSD With au switch (uilt-in magnet) L F G C Mounting asic xial
More informationCompact Guide Cylinder with Lock Series MLGP
Compact Guide Cylinder with Lock Series ø,,,, ø,,, ø0 CLG CL CN MLC Drop prevention when the pressure of air source is decreased or the residual pressure is released. Drop prevention for press fitting
More informationAttachments. T Type Interface: (T) M5 X 0.8, 1/ 8, 1/ 4, 3/ 8, 1/ 2 Makes it easy to diverge air out with T type interface
ttachments Piping dapter M X 0.8, / 8, /, / 8, /, /, asy maintenance. Makes it possible to attach and detach equipment without removing piping. -0 Piping adapter To order piping adapter with bracket, the
More informationSHORT STROKE CYLINDERS
O OK YI IX: Ordering ata age enefits & pecifications age eries & age eries & age eries & age eries & F age agnetic ensor & Options age OG F01- opyright 1, by, Inc. rinted in the... O O IFY: eries, ore,
More informationCompact Guide Cylinder with One-way Lock Series MLGP ø40, ø50, ø63. Prevents dropping when air supply pressure falls or residual pressure is exhausted
Compct uid Cylindr with On-wy ock ris MP ø, ø, ø Prvnts dropping whn ir supply prssur flls or rsidul prssur is xhustd Cn lockd t ny position h locking position cn chngd to ccommodt n xtrnl stoppr position
More informationBody (Black) O-ring Stud. Effective when piping in a confined space. The body and the threaded portion can rotate (For positioning to some extent).
Antistatic One-touch Fittings Tubing: Metric Size/Connection Thread: M, Rc, G, NPT, NPTF Series KA RoS One-touch fitting with antistatic prevention. One-touch IN/OUT connection. Possible to use from vacuum
More informationCipriani Harrison Valves Corp.
Butterfly Valve pplication Stainless steel hygienic butterfly valves are used in process piping systems for isolation and control. Butterfly valves operate either manually or automatically. Working Principle
More informationFlow Divider Type MH2FA, Series 4X (Differential lock) Size 12 to 32 up to 420 bar up to 300 L/min
RE 8/0.98 8/0.9 Flow Divider Type MHF, eries X (Differential lock) ize to up to 0 bar up to 00 /min RE 8/0.98 Replaces: 0.9 Characteristics: Double-acting (dividing and summating) flow divider Fixed division
More informationPoints. Precision Positioning Table TU. Variation. Major product specifications With flange
9 0 Precision Positioning Table Ball screw inear Points lide table with high accuracy and high rigidity in a single structure lide table Compact and slim type positioning table with an original U-shaped
More informationSeries MHY2/MHW Angular Gripper. Cam actuation style is now standardized! MHZ2 MHZJ2 MHQ MHL2 MHR MHK MHS MHC2 MHT2 MHY2 MHW2 MRHQ 2.
18 Angular Gripper Cam Style Rack & Pinion Style Series / Cam actuation style is now standardized! 2.8-1 18 Angular Gripper 18 Angular Gripper Series / Cam Style Rack & Pinion Style Series / Series MHY/Cam
More informationMedium bore size cylinder Double acting/single rod/with switch. SCA2 Series. Bore size: 40, 50, 63, 80, 100 mm. 80 dia. 63 dia. +2.
Meium ore size cyliner oule acting/single ro/with switch eries Bore size:, 5,, 8, 1 mm JI symol C VIBE. pecifications escriptions /2 Bore size mm ia. ia. ctuation Working flui Max. working pressure Ma
More informationCartridge Valves Technical Information. Quick reference
Quick reference Contents CPF0... 8. CP600-5... 8. CP60-5... 8. 066 handle kit... 8.5 MP06... 8.6 MP... 8.6 X05-FD0 Traction manifold... 8.9 X05-FD6 Traction manifold... 8.0 X05-FD0 Traction manifold...
More informationSXPCR SECTION 3 CYLINDERS. Page No. Precautions in Installing and Operating Cylinders Caution in Installing Cylinder ISO Standard Cylinder
SCTION CYINS Precautions in Installing and Operating Cylinders Caution in Installing Cylinder ISO Standard Cylinder QC Series ISO Standard Small Size Cylinder ( ~ ) QNC Series ISO2 Standard Square Cylinder
More informationVISUAL LEVEL INDICATORS
VIUL LEVEL INDICTOR LV... The level indicators series is available for both static and mobile applications; the construction materials used make it possible to guarantee service with wide temperature variations
More informationBasic type. With cap. Max. energy absorption (J) Stroke absorption (mm) Collision speed (m/s)
ock Absorber eries R pecifications R8 R8 R R R1 R1 R R pecifications R8 R8 R R R1 R1 R R Max. energy absorption () troke absorption.98.9 3.9.88 1.. 8.8 1 ollision speed (m/s). to. Max. operating frequency
More information35P-3 HH 3 HH 2 35P-3. f32 f40. f50 f63. f80 f100. Switch Set. Type Standard type Switch Set
f f f f f f Kind of piston seal U seal Slipper Seal U seal Slipper Seal Nominal pressure. MPa Maximum allowable pressure. MPa Proof test pressure MPa Minimum operating pressure. MPa or less Working speed
More information3-Way Mixing and Sequencing Globe Valves, Flared (5/8 in. O.D.) with Electric, Hydraulic, and Pneumatic Actuators
lectric, Hydrulic, nd Pneumtic ctutors TL 1. Select Vlve ody including P ode (Vlve Size, v Rting, Port ode) or select Vlve ssemly correct (refer to Tle 3 nd Tle 3 lso) less ctutor ode (XXX) including the
More informationIts modular concept allows to build up a ball valve for any degree of automation and any kind of application
Type 2657...59 DN 10 up to 80 mm; Plastic; 2/2 way dvantages/benefits ntegrated pilot valves, position feed-back and limit switches available Customized system solutions with Burkert valves & sensors With
More informationMINI-CYLINDER ISO 6432 SERIES TP Ø mm AND ACCESSORIES
-YR O R T OR inicylinders manufactured according to the O regulation having high resistance technopolymer heads and anodized aluminium liner. vailable in various versions with a wide range of accessories:
More information100Z-1 100Z-1 51 HA 50. Cushion ring Cushion ring. Type. Standard type. Switch Set
0Z-1 0Z-1 51 Type Nominal pressure Maximum allowable pressure Proof test pressure Minimum operating pressure Working speed range Working temperature range (ambient/fluid temperature) Structure of cushioning
More informationTHE ANSWER TO PROBLEMS OF: CORROSION, ABRASION, GRANULATED MATERIALS, POWDERS, SLUDGE, GAS ETC.
P PINC VLVE Mod. S pag. Mod. S pag. Mod. S pag. Mod. SD pag. Mod. S pag. Mod. S pag. 0 Mod. S pag. Mod. S pag. Mod. S pag. Mod. S0 pag. Mod. S pag. 0 Mod. S pag. Mod. S pag. Mod. S pag. Mod. S pag. TE
More information10A-2 AB 299 AB A-2. Double rod type Adjustable stroke (retraction side) Double acting type. Series variations. Series. Cylinder bore
-2-2 9 Series variations ouble acting type ouble rod type djustable stroke (retraction side) Standard type Switch Set VL Set SV Set Standard type VL Set Standard type VL Set Series -2-2R -2V2-2K2-2 -2V2-22
More informationPrecision Ball Screw/Spline
58-2E Models BNS-A, BNS, NS-A and NS Seal Outer ring Shim plate Seal Spline nut Seal Collar Shim plate Seal End cap Ball Outer ring Ball screw nut Outer ring Ball Retainer Retainer Outer ring Point of
More informationShock Absorber. Absorbing impact and noise. Shock absorber. Series D- -X. Shock absorber: RB series Coolant resistant type: RBL series
hock Absorber RB eries Absorbing impact and noise Dampening to meet the high speed requirements of the modern world. hock absorber: RB series oolant resistant type: RBL series hock absorber Automatic adjustment
More informationC-Lube Linear Way ML ML MLF
Maintenance ree & U.S. PTTD C-Lube Linear ay Variation of C-Lube Linear ay Shape Length of slide unit Model code C-Lube Linear ay is a linear motion rolling guide, incorporating the C-Lube as a components
More information4/2- and 4/3- Way Safety/Isolation Valve Model Z4 WEH 10 (Series 4X)
Function s n emergency on off isoltion vlve or on off isoltion/ypss vlve, primrly pplied with servo/proportionl systems Free flow through ports P nd T in ll pilot vlve positions Pilot operted y D 03, spool
More informationVane Type Rotary Actuators Series Variations
Vane Type Rotary Actuators Series Variations Vane Type Exterior CRB Series 0,, 0,, CRBU Series 0,, 0,, CRB Series, 6, 80, Has a compact body with exterior dimensions that do not change regardless of the
More informationSerie B2.1. Flanged ductile iron ball valve. made in. Application fields. Shut-off valves E U R O P E. 18
erie B. Flanged ductile iron ball valve BRanDOni made in E U R O P E Application fields WATER CONdITIONING GA EATING INdUTRY FIRE FIGTING www.brandoni.it erie B. eries B. valves are shut-off ball valves
More informationPRESSURE GAUGE SELECTORS
PRESSURE GUGE SELECORS Gauge isolator valves are designed to protect pressure gauges from pressure shocks when the pressure reading is not required; after each reading setting the selector to the closed
More informationPNEUMATIC AND HYDRAULIC MULTI-MOTION ACTUATOR
PNUT N YU UT-TN TUT ajor enefits Provides independent rotary and linear motion from one output shaft. deal for part transfer, positioning, and orientation. ealed shaft ball bearings on rotary section provide
More informationNormally Closed (N.C.), Normally Open (N.O.), Common (C.O.)
Series VVX// The models VX// have been revised. For details, please refer to catalog no. ES0-A. Similar updating Normally Closed (N.C.), Normally Open (N.O.), Common (C.O.) Courtesy of Steven Engineering,
More informationLO1 SERIES. compact direct solenoid actuated valves
SRS compact direct solenoid actuated valves 0 d i r e c t s o l e n o i d a c t u a t e d v a l v e s T N T................................................... V V O S T O N........................................
More informationCheck-Q-meter. Table of contents. Features. Functions. RE 27551/ /10 Replaces: Type FD
Check-Q-meter RE /0.0 /0 Replaces: 09.9 Type FD Nominal size... Series ax. Operating pressure 0 bar ax. Flow 0 l/min K9/ Table of contents Contents Page Features Functions Ordering details Symbols Functional
More information2/2-way ball valve with electric rotary actuator, ball valve in plastic, DN 10-50
/way ball valve with electric rotary actuator, ball valve in plastic, N 50 Suitable for aggressive media High flow rate value Actuator with adjustable limit switches Visual position indicator Type 0 can
More informationFeatures and Benefits
...................................................................................- Features and Benefits.............................................................................. How to Order....................................................................................
More informationMOTORIZED 3-WAY VALVE APPLICATION INSTRUCTIONS FOR LOW TEMPERATURE PROTECTION KIT MODELS PB AND CF/CH
MOTORIZED -WY VLVE PPLICTION INSTRUCTIONS FOR LOW TEMPERTURE PROTECTION KIT 10017190 MODELS PB 50-001 ND CF/CH 0-07 WRNING Electrical Shock Hazard-- For your safety, turn OFF electrical power supply before
More information4/3, 4/2 and 3/2 directional valve with wet-pin AC or DC solenoid
01/0 /3, / nd 3/ directionl vlve with wet-pin AC or DC solenoid Type WE...L7X.11 Size (NG) Up to 315 br Up to 0 L/min Contents Function nd configurtions Specifictions Symbols 03 Technicl dt 03 Electric
More informationBody (Black) O-ring. Effective when piping in a confined space. The body and the threaded portion can rotate (For positioning to some extent).
Antistatic One-touch Fittings ubing: etric Size/Connection hread:, Rc, G, NP, NPF Series RoS One-touch fitting with antistatic prevention. One-touch IN/OU connection. Possible to use from vacuum ( 0 kpa.
More informationA wide selection of pipe and orifice sizes is offered. Valves are available with threaded ports in brass and stainless steel.
Solenoid Valve Waterhammer-Free, 0- PSI /-Way; NPT - NPT; 0- PSI Advantages/Benefits Type 63 Waterhammer-free Low noise Zero differential pressure ompact design with high flow rates Low maintenance oil
More informationR310EN 2403 ( ) The Drive & Control Company
Feed Modules VKK R310EN 2403 (2008.09) The Drive & Control Company Linear Motion and Assembly Technologies Ball Rail Systems Roller Rail Systems Linear Bushings and Shafts Ball Screw Drives Linear Motion
More informationBettis RGS F-Series. Quarter-Turn Spring-Return (SR) and Double-Acting (DA) Pneumatic Actuators. Product Data Sheet RGS Rev.
Bettis RGS F-Series Quarter-Turn Spring-Return (SR) and Double-Acting (DA) Pneumatic Actuators Output Torques to 500,000 in-lb (56,492 N m) Ductile Iron or Stainless-Steel Construction Temperatures from
More informationModular Style Air Combination. Assembled by simply tightening the screws
Modular Style Air Combination Series AC Assembled by simply tightening the screws High strength die cast bracket Drain cock for one push drain exhaust Oil needle for easy oil volume adjustments The improved
More informationRodless cylinders Series 1600
Rodless cylinders Series 00 Basic version 0.Ø.stroke.0.M Max. stroke mt.) AL AI RA RB AF TC AM L LA+stroke AH TD AE TA RV Possibility of a single feed cylinder head AI AP AB AC AD TD TE TB AG RT Left head
More informationMN4TB1/2 Series. Applicable cylinder bore size: ø20 to ø80
M port vlve DIN ril mount MN/ Series pplicle cylinder ore size: ø0 to ø0 MN W *0E JIS symol port vlve -position single solenoid -position doule solenoid -position ll ports closed -position //R connection
More informationMX Series COMPACT AND USER FRIENDLY. Metal Tube Type Variable Area Flowmeter OUTLINE STANDARD SPECIFICATION MODEL CODE MX-400, MX-71 MX-52E
OMPT ND USER FRIENDLY MX Series Metal Tube Type Variable rea Flowmeter OUTLINE MX Series flowmeter is the metal tube type variable area flowmeter having the unified face-to-face dimension. The compact
More informationThe v alv e s with plug c onn e ctions in front are p erfera bly us e d on v alv e m o d ule s.
3/2 and 5/2 way valves Flow rate: 130 l/min; M5 and Legris ø 4 port connection Advantages / Benefits Optimal system solutions due to high level of modularity Maintenance-free and no wear due to high level
More informationValve Products ADEX Series Valves
atalog 000-2US X alves X is a miniature low power consumption solenoid valves, ideal for powering small to mid-sized pneumatic actuators used in automation and process applications. X's versatility is
More informationHRN/HRN-C Series Hydraulic Vane Rotary Actuators
HRN/ Hydraulic Vane Rotary Actuators Vane Actuators Tork-Mor HRN Contents Features... 2 Ordering Information... Engineering Data / Specifications... Dimensions... Features... 1 Ordering Information...12
More information507F. Multi-Port Sanitary Ball Valve. Full Port ISO 5211 Mounting Pad. For Automated & Manual Service. Pharmaceutical. Bio-Technology.
507F Multi- Sanitary Ball Valve Full ISO 5 Mounting Pad For Automated & Manual Service Pharmaceutical Bio-Technology Cosmetic Food & Beverage The 507F Series //5-Way Sanitary Ball Valve The 507F is a true
More informationMax. Operating Pressure. Min. *2 Required Pilot Pres. Max. Pilot
DIRCIONL CONROLS Solenoid Controlled ilot Operted Directionl Vlves hese vlves re composed of solenoid operted pilot vlves nd pilot operted slve vlve. When solenoid is energised the pilot vlve directs the
More information2/3 Port Valves for Fluid Control Model Selection 1
/ Port Valves for Control Model Selection Model Selection For product specifications such as maximum operating pressure differentials and operating temperature ranges, refer to the relevent pages of each
More informationInstructions for Parts Books
Instructions for Parts Books The heading at the top of the page will be the same for the picture of the parts at it is for the page with the part numbers. Definition of column headings on part number pages:
More information2.9. Namur Valves 2.9. page 175. Namur 1/4 also called Namur 1 in accordance to VDI / VDE Namur 1/2 also called Namur 2.
2.9 page 175 Namur 1/4 also called Namur 1 in accordance to VDI / VDE 3845. Namur 1/2 also called Namur 2. 2.9 Namur Valves + Selected models are available for low temperature application. Temperature-range:
More informationPilot operated 2 port solenoid valve (general purpose valve) Standard specifications NC (normally closed) type C C. 2 /s) Starting
21/22 Series (general purpose valve) 21/22 Series NC (normally closed) type, NO (normally open) type Port size: Rc1 1/4 to Rc2, 32 to 50 flange iaphragm structure JIS symbol 21: Common specifications Item
More information210H-3 HA 289 HA H-3. f80 f160. f140. f125. f50. Type. Standard type. Adaptable fluid. Seal material. Phosphate ester fluid. Water in oil fluid
288 28 Type Nominal pressure Maximum allowable pressure roof test pressure Minimum operating pressure orking speed range orking temperature range (ambient/fluid temperature) Structure of cushioning Adaptable
More informationRODLESS PNEUMATIC CYLINDER
ymbol ROLE Z,Z,ZK series Z odel ummary Z tandard cylinder With identical fitting length as existing cylinders ithout piston. 0-stroke compatible. I O - 0 0 QULIY ERIIE tandard Z Z Guiding cylinder With
More informationElectroMechanical Cylinder LEMC
www.lmotion.ru lmotionmail@ya.ru.: (9)9160 ElectroMechanical Cylinder LEMC THE POWER OF KNOWLEDGE ENGINEERING www.lmotion.ru lmotionmail@ya.ru.: (9)9160 ElectroMechanical Cylinder LEMC enefits High efficiency
More informationApplication PN 16 / 40 DN Product features. Compact overall height Body shape gives optimum flow characteristic
pplication Control of gases, vapours and liquids. The modular concept of valve, multi spring actuator and digital FOXBORO/Eckardt positioner Type SRD 992 facililates trouble free expansion to allow for
More informationProduct Description. Further highlights. Outstanding features. 4 Bosch Rexroth Corporation Miniature Linear Modules R310A 2418 (2009.
4 Bosch Rexroth orporation Miniature Linear Modules R310A 2418 (2009.05) Product Description Outstanding features Rexroth Miniature Linear Modules are precise, ready-to-install linear motion systems that
More informationPilot Operated Pressure Relief Valves with 2 or 3 Pressure Ratings Type DB 3U, Series 5X
ilot Operted ressure Relief Vlves with or ressure Rtings ype D U, Series RE 6/.9 RE 6/.9 Sizes,, Up to r Up to 6 L/min Replces: Specil fetures: Suplte mounting Mounting to DIN form E, Connection pltes
More informationSensor/actuator cabling PLUSCON field Sensor/actuator boxes M12 distributor with metal thread, heavy-duty
Sensor/actuator boxes M distributor with metal thread, heavy-duty Notes: Suitable for SPEEDCON and M standard, see page:. For further technical data, see: www.phoenixcontact.net/catalog With a master cable
More informationType. Page 518. A support guide is designed to support workpieces with significant overhang.
Environment Clean Room Specification ISO Class 4 *1 (ISO14644-1) Built-in vacuum piping Possible to mount the main body without removing the external cover etc. Body-integrated linear guide specification
More informationSRL3. Rodless cylinder. Rodless type. ø12 ø16 ø20 ø25 ø32 ø40 ø50 ø63 ø80 ø100
Overview High load and long service life. that can operate at high speeds. Ample variation with sizes available from ø to ø00. eatures lat cylinder lat piston with a structure that could take on the load.
More informationPARTS CATALOG. No. OBB702 REVISED EDITION-C. Models
Revision C: MXZ-3C24/3C30/4C36/5C42NA2 and MXZ-2C20/3C24/3C30NAHZ2 have been added. Please void OBB702 REVISED EDITION-B. OUTDOOR INDOOR UNIT UNIT PARTS CATALOG No. OBB702 REVISED EDITION-C Models MXZ-3C24NA
More informationFluoropolymer Fittings Hyper Fitting
Fluoropolymer Fittings yper Fitting Series Q S Q QR Quadruple seal construction (PT.) efore tightening Nut Tubing support Insert bushing Tubing fter tightening Quadruple sealing parts New PF ourtesy of
More informationPRA/282000/M. Smart cylinders ISO 6431, VDMA and NFE Magnetic piston Double acting Ø 32 to 100 mm
Smart cylinders ISO, VDMA and NFE 9-00- Magnetic piston Double acting Ø to 00 mm Conforms to ISO, VDMA, NFE 9-00- Complete functional unit with integrated AS-Interface bus system or multipole connector
More informationCOMPACT CYLINDERS SERIES CMPC Ø
T YIE EIE 0 ompact cylinder series available in numerous versions to meet a full range of requirements: With or without magnet ingle-acting extended rod, retracted or through-rod ual-acting non-rotating
More informationMark 55, SPA55 & PA55 Series
single solenoid open center single solenoid pilot closed center pilot 5 orted, 2 and 3 position, 4-way, Spool & Sleeve v: 5.5 Direct solenoid, solenoid pilot, or air pilot actuated lug-in solenoid with
More informationValve Selection Guide for Two-Way Valves
Vlve Selection Guide Two-Wy Vlves 281 F Mximum; 35 psig Mximum Stem Vlve Body Type Angle Strightwy Flred Swet Screwed Screwed Flnged Stem Up Open VB-7211-0-3-P VB-7211-0-4-P VB-7212-0-4-P VB-7214-0-4-P
More information10B-6 10B-6 AB 241 AB B-6 10B-6. Stroke Range. Double. type. Cylinder bore. Double brake type. Single brake type 10B-6. Cylinder bore (mm)
0 B- B- 1 Standard type, Switc Set Type Single brake type ouble brake type Series B- B- Cylinder bore (mm) Working fluid Lubrication Working pressure range roof test pressure Working speed range Working
More informationSTAINLESS STEEL MINI-CYLINDER SERIES ISO 6432 Ø mm
TN T N-YN O mm O stainless steel micro-cylinders are available in various versions with a wide range of accessories with or without magnet execution double-acting - single or through-rod gaskets: Polyurethane
More informationSKF actuators available for quick delivery. Selection guide
SKF actuators available for quick delivery Selection guide A wide range of SKF actuators available for quick delivery Industrial actuator 24 Volt DC Load range 1 000 to 4 000 N Speed range 5 to 52 mm/s
More informationVariable Displacement Plug-In Motor A6VE. Series 6, for open and closed circuits Axial tapered piston, bent axis design
rueninghaus Hydromatik Series 6, for open and closed circuits xial tapered piston, bent axis design Size 28...20 Nom. pressure up to 400 bar Peak pressure up to 40 bar RE 9606/0.97 RE 9606/0.97 replaces
More informationFormulae and examples of calculation
Shock absorber Formulae and examples of calculation A shock absorber decelerates linearly. Roughly 90% of shock absorber applications can be modelled if the following 4 factors are known: 1. Mass to slow
More information6/2 way directional valve type 6/2UREM6 and 6/2URMM6
6/2 wy directionl vlve type 6/2UREM6 nd 6/2URMM6 NS6 dm 3 up to 35 MP up to 50 /min DT SHEET - OPERTION MNUL WK 421 540 03.2016 PPLICTION Moile 6 wy 2 position stckle directionl vlves type 6/2UREM6...
More information6/2 way directional valve. Type 6/2UREM10-1 -
6/2 wy directionl vlve type 6/2UREM0 NS 0 dm up to 5 MP up to 80 /min DT SHEET - SERVICE MNU NUL WK 42 590.202 PPLICTION Moile 6 wy 2 position stckle directionl vlves type 6/2UREM0... re intended for hydrulic
More informationIndustrial Pressure Transmitter
ECT 87 Industrial Pressure Transmitter Swiss based Trafag is a leading international supplier of high quality sensors and monitoring instruments for measurement of and temperature. The economical transmitter
More informationHARTING D-Sub Selection Guide
HARTING D-Sub Selection Guide People Power Partnership D-Sub Selection Guide D-Sub Device Connectivity HARTING Connectivity & Networks generates solutions throughout the triad of Installation Technology,
More informationThe 505F Series 3/4/5-Way Ball Valve. Standard Features and Benefits. Operating Conditions. Specifications. Options
The 505F Series //5-Way Ball Valve The 505F is a true multi-way ball valve with balanced fourseat construction. This full port valve is available in a variety of flow plans which can replace multiple two-way
More informationHDF series - PARALLEL GRIPPER
Operation specification and Ordering expression Internal structure DS Angular DM 0 Angular Specification ore size Type of operation Fluid Pressure range Range of service temperature kgf/cm (kpa) Max. operation
More informationDifferential Pressure Switch
Features Using piezoresistive pressure sensor, which is compensated and aged well; high accuracy, quick response; Amplifier circuit driving switch relay; relay value could be set freely between zero and
More informationHD 049 HD 069 HD 172 HD 319 HD 419 HD 619. Operating pressure up to 8700 psi Nominal flow rate up to gpm us
H i g h P re s s u re i l t e r K i t s H 049 H 069 H 172 H 319 H 419 H 619 Operating pressure up to 8700 psi Nominal flow rate up to 118.9 gpm 40.95-3us e s c r i p t i o n pplication In the high pressure
More informationNickel-Plated Brass Push-In Fittings - NPTF/INCH
/INCH Tube Connections: External /8, 5/32, /4, 5/6, 3/8, /2 Thread Connections 0-32 UNF, /8, /4, 3/8, /2 Reusable thread seal, PTFE seal ring (Teflon ) - Pro-Fit Standard - Camozzi s all metal fittings
More informationClean One-touch Fittings
Clean One-touch Fittins //G Series G Series K2 2 K /D / 0 D KD K K 2 G2 S One-touch fittins and tubin for blowin systems and drive air One-touch fittins (for blowin) Collet Seal ED (Fluorine coatin) Special
More informationTechnical Specifications - J Series
Opaque Cover configuration - 4 cover screws, lift off cover Construction Cover retention chain Hot compression molded fiberglass reinforced polyester (thermoset) Stainless steel beaded chain for securing
More information