Universal type Port size AS13 1F-M3. M3 x 0.5 M5 x 0.8 AS23 1F-01 AS23 1F-02 AS33 1F-02 AS33 1F-03 AS43 1F-04 R 1/8 R 1/4 R 1/4 R 3/8 R 1/2

Size: px
Start display at page:

Download "Universal type Port size AS13 1F-M3. M3 x 0.5 M5 x 0.8 AS23 1F-01 AS23 1F-02 AS33 1F-02 AS33 1F-03 AS43 1F-04 R 1/8 R 1/4 R 1/4 R 3/8 R 1/2"

Transcription

1 Minimizes installation time and cost Reduces the mounting height and enables compact machinery design. Effective area is larger than the former model. Tube swivels 0 Universal type permits 0 piping swivel. ø size added to applicable tubing sizes Metric size (Release button: White color) ø, ø., ø, ø, ø, ø0, ø Inch size (Release button: Orange color) ø/", ø/", ø/", ø/", ø/", ø/", ø/" Maximum operating pressure MPa max. tubing materials Nylon, soft nylon, and polyurethane tubing are applicable. Retainer prevents accidental loss of needle. Option Nickel plated option has been increased ( to 0 turns) The increased number of needle rotations ( to 0 turns) permits easy control at low speeds. tubing ø Speed Controller with One-touch Fitting Series F-M F-M F-M F-M M x 0. M x 0. F-U0/ F-U0/ 0- UNF F-0 F-0 F-0 F-0 F-0 F-0 F-0 F-0 F-0 F-0 R / R / R / R / R / Specifications Universal type Port size Fluid Proof pressure Max. operating pressure Mini. operating pressure Ambient and fluid temperature tubing material () Option tubing Metric size Inch size cylinder bore size. 0 /" /" /" /" /" /" /" (mm) ().,, (), 0,, 0 (), 0,, 0 () 0,, 0,,, 0 0, 0, 0, 0,, 0, 00 Note ) F-M-0 applicable cylinder bore sizes are.,,. Note ) only Note ) Meter-out and meter-in types can be visually differentiated by the lock nut. The lock nut on the meter-out type is zinc chromated, while the meter-in type is black zinc chromate plated. Note ) : parts are electroless nickel plated, provided as standard. (N specifications) Air. MPa (.0 MPa () ) MPa (0. MPa () ) 0. MPa to 0 C (No freezing) 0 turns ( turns () ) Nylon, Soft nylon, Polyurethane () With seal (), Round lock nut (), Note ) In case of F-M-0, F-M-0 Note ) In case of F-M and F-U0/ types. In case of F-M and F-U0/ F-M-0: 0 turns. Note ) Use caution regarding the max. operating pressure when soft nylon or polyurethane tubing is used. (Refer to pages and for details.) Note ) In case of F-M-0 and F-M-0, polyurethane only. Note ) M, M, 0-UNF type ports are not available with seals. Note ) parts are all electroless nickel plated. Flow Rate and Effective Area F-M F-M F-0 F-0 F F F-M F-M F-0 F-0 F F F-M-0 Metric size ø, ø., ø ø., ø, ø ø., ø ø, ø, ø0 ø ø ø, ø0 ø ø ø0, ø ø0 ø Tubing ø/", ø/", ø/" ø/", ø/", ø/", ø/", ø/", Inch size ø/" ø/" ø/" ø/" ø/" ø/" ø/" ø/" ø/", ø/" ø/" ø/" ø/" Controlled Flow rate l /min (ANR) flow (Free flow) Effective area (mm ) Note ) Flow rate values are measured at 0. MPa and 0 C. Note ) U0/ has the same specification as M. JIS Symbol Flow Direction Symbols on Body Universal type Meter-out type Meter-in type Indication symbol RoHS Symbol Made to Order (Refer to page for details.) Caution Be sure to read before handling. Refer to front matters and 9 for Safety Instructions and pages to for Flow Control Equipment Precautions. Courtesy of Steven Engineering, Inc.-0 Ryan Way, South San Francisco, CA Main Office: (0) -900-Outside Local Area: (00)

2 Speed Controller with One-touch Fitting Series How to Order Body size M, M standard /, / standard / standard / standard 0 F 0 0 S Type Elbow Universal Made to Order (Refer to page for details.) Option Nil None S With seal N If more than one option is required, write option part numbers in the order of S, N. M, M, and U0/ are not available with seals. Lock nut option Nil Hexagon lock nut J Round lock nut With One-touch fitting 0F-M, F-M 0F-M, F-M 0F-M-0, F-M-0 0F-0, F-0 0F-0, F-0 Control type 0 Meter-out Meter-in Thread type Metric thread (M, M) Unified thread (0- UNF) R NPT Needle Valve/Flow Characteristics Nil N Effective area (mm ) Port size M M x 0. M M x 0. U0/ 0- UNF 0 / 0 / 0 / 0 / 0F-M, F-M 0F-M, F-M Note) -U0/ is the same as M. 0F, F 0F, F Effective area (mm ) tubing Note) Metric size Inch size 0 ø 0 ø/" ø. 0 ø/" 0 ø 0 ø/" 0 ø 0 ø/" 0 ø 09 ø/" 0 ø0 ø/" ø ø/" Note) For applicable tubing selection, refer to the on page. Use ø/" tube. 0F-0, F-0 0F-0, F-0 0F, F 0F, F Effective area (mm ) P N AQ V AK VCHC S R Q Effective area (mm ) Effective area (mm ) Effective area (mm ) KE TMH Courtesy of Steven Engineering, Inc.-0 Ryan Way, South San Francisco, CA Main Office: (0) -900-Outside Local Area: (00)

3 Series Construction Meter-out type Universal type Meter-out type U0/ port ø tubing type o!0 w u U0/ port r t! q i e!! Meter-in type Meter-in type U0/ port ø tubing type U0/ port Courtesy of Steven Engineering, Inc.-0 Ryan Way, South San Francisco, CA Main Office: (0) -900-Outside Local Area: (00)

4 Speed Controller with One-touch Fitting Series Construction Meter-out type 0F-0 Universal type Meter-out type 0F-0 Meter-in type F-0 Meter-in type F-0 Component Parts No. Description Material Note 9 0 Body A Handle Body B Needle Needle guide Seat ring Lock nut U-packing Cassette Seal Gasket () () Steel H, Stainless steel () Zinc chromated () Note ) F-M-0 and F-M-0 are made of electroless nickel plated brass. Note ) F-M is made of stainless steel. Note ) F, F-0:. Note ) Meter-in type is black zinc chromate plated. Component Parts No. Description Material 9 0 Body A Elbow body Handle Body B Needle Needle guide Seat ring Lock nut U seal Cassette Seal Spacer Gasket () Steel H, Stainless steel Note () Zinc chromated () Note ) F-M is made of stainless steel. Note ) F, F-0:. Note ) Meter-in type is black zinc chromate plated. P N AQ V AK VCHC S R Q KE TMH Courtesy of Steven Engineering, Inc.-0 Ryan Way, South San Francisco, CA Main Office: (0) -900-Outside Local Area: (00)

5 Series Elbow Type U0/ port tubing (Hexagon width across flats) tubing (Hexagon width across flats) ø tubing type F-M-0 F-M-0 ød tubing ø L L A ød Metric Size tubing L () A () T H () D D D L L L M Max. Min. Max. Min. (g) F-M-0 M x F-M-0 M x F-M-. 0. M x F-M-0 0 F-M- M x F-U0/- 0-UNF.. F-M-0 M x F-U0/-0 0-UNF F-M-0 M x F-U0/-0 0-UNF F F F-0-0 / F-0-0 (.)... 9 F F F F-0-0 (.)... F / F F F F F F / F F F / F-0- (.) Note ) ( ) are the dimensions of NPT thread. Note ) Reference dimensions Note ) Reference thread dimensions after installation. 0 Inch Size T H () (Hexagon width across flats) H D D L L L M L L () Min. Max. Min. F-M-0 /" 0. M x F-M-0 /" 0 F-M-0 /" M x 0... F-U0/-0 /" 0-UNF F-M-0 /" M x 0... F-U0/-0 /" 0-UNF F-M-0 /" M x F-U0/-0 /" 0-UNF F-M-0 /" M x F-U0/-0 /" 0-UNF F-0-0 /" 0... F-0-0 /" 0.. F-0-0 /" / (.) F-0-0 /"..9 9 F-0-09 /".... F-0-0 /" 0... F-0-0 /"..9.. F-0-0 /" (.) F-0-09 /"... / 9. F-0- /".9.. F-0-0 /".. 0 F-0-09 /" F-0- /" F-0-0 /".. F-0-09 /" / F-0- /" F-0- /" / F-0- /" (.) Note ) ( ) are the dimensions of NPT thread. Note ) Reference thread dimensions after installation. Note ) Reference dimensions Courtesy of Steven Engineering, Inc.-0 Ryan Way, South San Francisco, CA Main Office: (0) -900-Outside Local Area: (00) tubing Max. A () T ød M (g)

6 Speed Controller with One-touch Fitting Series Universal Type tubing (Hexagon width across flats) U0/ port tubing (Hexagon width across flats) P N Metric Size Inch Size L () A () tubing T H () tubing L () A () D D D L L L L M T H () D D D L L L L M Max. Min. Max. Min. (g) Max. Min. Max. Min. F-M F-M-0 /".9.. F-M-0 M x M x F-M-0 /"..9. F-M- M x 0. F-M-0 /" M x F-U0/- 0-UNF F-U0/-0 /" 0-UNF F-M-0 M x F-M-0 /" M x F-U0/-0 0-UNF F-U0/-0 /" 0-UNF F-M-0 M x 0. F-M-0 /" M x F-U0/-0 0-UNF F-U0/-0 /" 0-UNF F-0-.. F-M-0 /" M x F F-U0/-0 /" 0-UNF / F-0-0 (.) F-0-0 /" F F-0-0 /".9 F F-0-0 /" / (.) F F-0-0 /" F-0-0 (.) F-0-09 /" F F-0-0 /" / F F-0-0 /" F F-0-0 /" (.) F F-0-09 /" / F F-0- /" F F-0-0 /" F F-0-09 /" / F F-0- /" F F-0-0 /" F F-0-09 /" / / F-0- (.) F-0- /".... Note ) ( ) are the dimensions of NPT thread Note ) Reference thread dimensions after installation. 0. Note ) Reference dimensions F-0- /" /. F-0- /" (.) Note ) ( ) are the dimensions of NPT thread Note ) Reference thread dimensions after installation. Note ) Reference dimensions (g) AQ V AK VCHC S R Q KE TMH Courtesy of Steven Engineering, Inc.-0 Ryan Way, South San Francisco, CA Main Office: (0) -900-Outside Local Area: (00)

7 Series Made to Order Specifications: Please contact SMC for detailed dimensions, specifications, and delivery. Lubricant: Vaseline X Ex.) 0F-0-0S-X Throttle Valve (Without Check Valve) X Grease-free (Seal: Fluorine Coating) + Throttle Valve (Without Check Valve) X Ex.) 0F-0-0S-X Note ) Not particle-free Note ) Throttle valve is only compatible with the part no. of the meter-out type. Ex.) 0F-0-0S-X Note) Throttle valve is only compatible with the part no. of the meter-out type. Fixed Throttle (No needle function) X0 How to Order 0 F 0 0 S X0 Body size M, M standard /, / standard 0 Elbow Control type Meter-out Meter-in With One-touch fitting Symbol Fixed orifice 9 0 ø0. ø0. ø0. ø0. ø0. ø0. ø0. ø0. ø0.9 ø.0 Port size M M 0 0 M x 0. M x 0. R / R / F-M-0 Option Nil None S With seal M and M are not available with seals. tubing 0 0 F-M-0 F-M-0 ø ø model F-0-0 F-0-0 Fixed orifice F-0-0 The graph below shows the relationship between orifices for each cylinder bore and cylinder speed. Please refer to it during selection. The cylinder speeds on the graph are theoretical values. Actual values may differ depending on the piping conditions or sliding friction, so please use this graph as a guideline only. Cylinder speed (mm/s) Cylinder bore size ø ø0 ø ø0 ø ø ø Diameter of orifice (mm) Courtesy of Steven Engineering, Inc.-0 Ryan Way, South San Francisco, CA Main Office: (0) -900-Outside Local Area: (00)

Body (Black) O-ring Stud. Effective when piping in a confined space. The body and the threaded portion can rotate (For positioning to some extent).

Body (Black) O-ring Stud. Effective when piping in a confined space. The body and the threaded portion can rotate (For positioning to some extent). Antistatic One-touch Fittings Tubing: Metric Size/Connection Thread: M, Rc, G, NPT, NPTF Series KA RoS One-touch fitting with antistatic prevention. One-touch IN/OUT connection. Possible to use from vacuum

More information

Body (Black) O-ring. Effective when piping in a confined space. The body and the threaded portion can rotate (For positioning to some extent).

Body (Black) O-ring. Effective when piping in a confined space. The body and the threaded portion can rotate (For positioning to some extent). Antistatic One-touch Fittings ubing: etric Size/Connection hread:, Rc, G, NP, NPF Series RoS One-touch fitting with antistatic prevention. One-touch IN/OU connection. Possible to use from vacuum ( 0 kpa.

More information

Inch Size Uni One-touch Fittings. Applicable Tubing. Tubing material. Specifications. Fluid Note 3)

Inch Size Uni One-touch Fittings. Applicable Tubing. Tubing material. Specifications. Fluid Note 3) Courtesy of C/Flodyne/ydradyne otion Control ydraulic Pneumatic Electrical echanical (00) 2-50 www.cmafh.com Guide Chuck Suitable for use with nylon and urethane. arge retaining force. The chuck provides

More information

Free Mount Cylinder Double Acting, Double Rod. ø6, ø10, ø16, ø20, ø25, ø32. How to Order. Action. D Double acting. Standard stroke (mm)

Free Mount Cylinder Double Acting, Double Rod. ø6, ø10, ø16, ø20, ø25, ø32. How to Order. Action. D Double acting. Standard stroke (mm) ouble Acting, ouble Rod eries CUW ø, ø, ø1, ø, ø2, ø How to Order CUW With auto switch CUW MBW Built-in magnet ouble rod 1 2 mm mm 1 mm mm 2 mm mm Action ouble acting Number of auto switches Nil 2 pcs.

More information

Antistatic One-touch Fittings. Packing. Can be used for a wide range of pressures from low vacuum up to a pressure of 1.0MPa.

Antistatic One-touch Fittings. Packing. Can be used for a wide range of pressures from low vacuum up to a pressure of 1.0MPa. Antistatic One-touch Fittings Series KA One-touch loading and unloading Possible to use in vacuum (ax. 0kPa) Can be used in copper-free application Flame resistance (UL- standard, V-0) Surface resistance

More information

2/3 Port Valves for Fluid Control Model Selection 1

2/3 Port Valves for Fluid Control Model Selection 1 / Port Valves for Control Model Selection Model Selection For product specifications such as maximum operating pressure differentials and operating temperature ranges, refer to the relevent pages of each

More information

Normally Closed (N.C.), Normally Open (N.O.), Common (C.O.)

Normally Closed (N.C.), Normally Open (N.O.), Common (C.O.) Series VVX// The models VX// have been revised. For details, please refer to catalog no. ES0-A. Similar updating Normally Closed (N.C.), Normally Open (N.O.), Common (C.O.) Courtesy of Steven Engineering,

More information

Modular Style Air Combination. Assembled by simply tightening the screws

Modular Style Air Combination. Assembled by simply tightening the screws Modular Style Air Combination Series AC Assembled by simply tightening the screws High strength die cast bracket Drain cock for one push drain exhaust Oil needle for easy oil volume adjustments The improved

More information

ø6, ø10, ø15, ø20, ø25, ø32, ø40, ø50, ø63 How to Order Switch rail Nil Standard stroke Refer to page 12 for standard stroke.

ø6, ø10, ø15, ø20, ø25, ø32, ø40, ø50, ø63 How to Order Switch rail Nil Standard stroke Refer to page 12 for standard stroke. Magnetically Coupled Rodless Cylinder: Direct Mount ype Series ø, ø, ø, ø, ø, ø, ø, ø0, ø Direct mount type mm mm mm mm mm mm mm 0 0 mm mm 00 MB Piping type Both sides piping type Centralized piping type

More information

Nickel-Plated Brass Push-In Fittings - NPTF/INCH

Nickel-Plated Brass Push-In Fittings - NPTF/INCH /INCH Tube Connections: External /8, 5/32, /4, 5/6, 3/8, /2 Thread Connections 0-32 UNF, /8, /4, 3/8, /2 Reusable thread seal, PTFE seal ring (Teflon ) - Pro-Fit Standard - Camozzi s all metal fittings

More information

AME Model. (1) Rated flow (l/min (ANR)) Port size (Nominal size B) Weight (kg)

AME Model. (1) Rated flow (l/min (ANR)) Port size (Nominal size B) Weight (kg) Super Mist Separator Series AME Series AME separates and absorbs aerosol state fine oil particles in compressed air and changes the oil lubricating compressed air to oilless equivalent air. It should be

More information

PN LINE. PN Line. PX Line. PA Line. PU Line PX LINE. PV Line PA LINE & TUBINGS PU LINE PV LINE. Brass Push-in fittings

PN LINE. PN Line. PX Line. PA Line. PU Line PX LINE. PV Line PA LINE & TUBINGS PU LINE PV LINE. Brass Push-in fittings I NDEX PV LINE PX LINE PU LINE PA LINE & TUBINGS PN LINE Brass Push-in fittings Stainless Steel Push-in fittings Brass Standard fittings and Flexible Hoses Couplings and Multiple Connectors Function fittings

More information

Clean One-touch Fittings

Clean One-touch Fittings Clean One-touch Fittins //G Series G Series K2 2 K /D / 0 D KD K K 2 G2 S One-touch fittins and tubin for blowin systems and drive air One-touch fittins (for blowin) Collet Seal ED (Fluorine coatin) Special

More information

Compact Guide Cylinder with Lock Series MLGP

Compact Guide Cylinder with Lock Series MLGP Compact Guide Cylinder with Lock Series ø,,,, ø,,, ø0 CLG CL CN MLC Drop prevention when the pressure of air source is decreased or the residual pressure is released. Drop prevention for press fitting

More information

Fluoropolymer Fittings Hyper Fitting

Fluoropolymer Fittings Hyper Fitting Fluoropolymer Fittings yper Fitting Series Q S Q QR Quadruple seal construction (PT.) efore tightening Nut Tubing support Insert bushing Tubing fter tightening Quadruple sealing parts New PF ourtesy of

More information

How to Order M9BW. Action D Double acting. Load voltage M9NWV M9NW 5 V, 12 V 5 V, 24 V 12 V M9BWV M9BW 12 V 12 V M9NAV M9NA 5 V, 12 V 12 V.

How to Order M9BW. Action D Double acting. Load voltage M9NWV M9NW 5 V, 12 V 5 V, 24 V 12 V M9BWV M9BW 12 V 12 V M9NAV M9NA 5 V, 12 V 12 V. arallel Style Air ripper/-inger Type Series MHS ø1, ø, ø, ø, ø, ø, ø, ø, ø1, ø How to rder Bore size ø1 to ø Number of fingers fingers MHS Bore size 1 1 mm mm mm D MBW Action D Double acting Auto switch

More information

DN 1/4" to 4" Male, Female BSP - 10 C C Max Pressure : 30 Bars (up to DN1") Specifications : Anti blow-out stem PTFE packing Full bore

DN 1/4 to 4 Male, Female BSP - 10 C C Max Pressure : 30 Bars (up to DN1) Specifications : Anti blow-out stem PTFE packing Full bore Size : Ends : Min Temperature : Max Temperature : DN 1/4" to 4" Male, Female BSP - 10 C + 120 C Max Pressure : 30 Bars (up to DN1") Specifications : Anti blow-out stem PTFE packing Full bore Materials

More information

Odor Removal Filter Series AMF

Odor Removal Filter Series AMF Odor Removal Filter Series AMF Series AMF Odor Removal Filter efficiently removes odor in compressed air with an activated carbon element. The unit is designed for use in food processing, pharmaceutical,

More information

Size : Ends : Min Temperature : Max Temperature : Materials : Brass

Size : Ends : Min Temperature : Max Temperature : Materials : Brass Size : Ends : Min Temperature : Max Temperature : DN 1/2" to 1 Free nut BSP, male or female - 10 C + 120 C Max Pressure : 20 Bars Specifications : Before or after water meter PTFE packing With free nut

More information

DN 1/4" to 4" Male, Female BSP - 10 C C Max Pressure : 40 Bars Specifications : Anti blow-out stem PTFE packing Full bore.

DN 1/4 to 4 Male, Female BSP - 10 C C Max Pressure : 40 Bars Specifications : Anti blow-out stem PTFE packing Full bore. Size : Ends : Min Temperature : Max Temperature : DN 1/4" to 4" Male, Female BSP - 10 C + 120 C Max Pressure : 40 Bars Specifications : Anti blow-out stem PTFE packing Full bore Materials : Brass Page

More information

A wide selection of pipe and orifice sizes is offered. Valves are available with threaded ports in brass and stainless steel.

A wide selection of pipe and orifice sizes is offered. Valves are available with threaded ports in brass and stainless steel. Solenoid Valve Waterhammer-Free, 0- PSI /-Way; NPT - NPT; 0- PSI Advantages/Benefits Type 63 Waterhammer-free Low noise Zero differential pressure ompact design with high flow rates Low maintenance oil

More information

Direct-operated 2/2-way compact solenoid valves Type EV210A

Direct-operated 2/2-way compact solenoid valves Type EV210A Data sheet Direct-operated 2/2-way compact solenoid valves Type EV210A EV210A covers a wide range of small, directoperated 2/2-way solenoid valves for use in industrial machinery. The compact design together

More information

Series MHY2/MHW Angular Gripper. Cam actuation style is now standardized! MHZ2 MHZJ2 MHQ MHL2 MHR MHK MHS MHC2 MHT2 MHY2 MHW2 MRHQ 2.

Series MHY2/MHW Angular Gripper. Cam actuation style is now standardized! MHZ2 MHZJ2 MHQ MHL2 MHR MHK MHS MHC2 MHT2 MHY2 MHW2 MRHQ 2. 18 Angular Gripper Cam Style Rack & Pinion Style Series / Cam actuation style is now standardized! 2.8-1 18 Angular Gripper 18 Angular Gripper Series / Cam Style Rack & Pinion Style Series / Series MHY/Cam

More information

JDV CONTROL VALVES CO., LTD. JCT/JCTM Series 3/4 Way Trunnion Type Valve Manual

JDV CONTROL VALVES CO., LTD. JCT/JCTM Series 3/4 Way Trunnion Type Valve Manual JCT/JCTM Series 3/4 Way Trunnion Type Valve Manual 1. Please read this manual before installation or servicing. 2. Before installing or servicing, please ensure the line pressure has been relieved and

More information

Model Selection 1. Process Valves. Air. Vacuum

Model Selection 1. Process Valves. Air. Vacuum Process Valves Model Selection For product specifications such as maximum operating pressure differentials and operating temperature ranges, refer to the relevent pages of each product. Air One-touch fittings

More information

Edition 3 September Air Angle Wrench and Nut Runner. QA6 and QA8 Series. Parts Information. Save These Instructions

Edition 3 September Air Angle Wrench and Nut Runner. QA6 and QA8 Series. Parts Information. Save These Instructions 660072 Edition 3 September 2007 Air Angle Wrench and Nut Runner QA6 and QA8 Series Parts Information Save These Instructions Module Exploded Diagram 7 5 9 7 2 9 50 3 8 3 38 39 8 9 20 2 33 22 23 3 2 3 37

More information

Bettis RGS F-Series. Quarter-Turn Spring-Return (SR) and Double-Acting (DA) Pneumatic Actuators. Product Data Sheet RGS Rev.

Bettis RGS F-Series. Quarter-Turn Spring-Return (SR) and Double-Acting (DA) Pneumatic Actuators. Product Data Sheet RGS Rev. Bettis RGS F-Series Quarter-Turn Spring-Return (SR) and Double-Acting (DA) Pneumatic Actuators Output Torques to 500,000 in-lb (56,492 N m) Ductile Iron or Stainless-Steel Construction Temperatures from

More information

Technical Specifications - J Series

Technical Specifications - J Series Opaque Cover configuration - 4 cover screws, lift off cover Construction Cover retention chain Hot compression molded fiberglass reinforced polyester (thermoset) Stainless steel beaded chain for securing

More information

Size : Ends : Min Temperature : Max Temperature : Materials : Brass

Size : Ends : Min Temperature : Max Temperature : Materials : Brass Size : Ends : Min Temperature : Max Temperature : DN 1/2" to 2 Free nut BSP, male or female - 10 C + 120 C Max Pressure : 20 Bars up to DN1 1/2, 16 bars over Specifications : Before or after water meter

More information

2/3 Port Valves for Fluid Control Model Selection 1

2/3 Port Valves for Fluid Control Model Selection 1 / Port Valves for Control Model Selection Model Selection For product specifications such as maximum operating pressure differentials and operating temperature ranges, refer to the relevent pages of each

More information

Attachments. T Type Interface: (T) M5 X 0.8, 1/ 8, 1/ 4, 3/ 8, 1/ 2 Makes it easy to diverge air out with T type interface

Attachments. T Type Interface: (T) M5 X 0.8, 1/ 8, 1/ 4, 3/ 8, 1/ 2 Makes it easy to diverge air out with T type interface ttachments Piping dapter M X 0.8, / 8, /, / 8, /, /, asy maintenance. Makes it possible to attach and detach equipment without removing piping. -0 Piping adapter To order piping adapter with bracket, the

More information

Size : Ends : Min Temperature : Max Temperature : Materials : Brass

Size : Ends : Min Temperature : Max Temperature : Materials : Brass Size : Ends : Min Temperature : Max Temperature : DN 1/2" to 1 Free nut BSP, male or female - 10 C + 120 C Max Pressure : 25 Bars Specifications : Before or after water meter PTFE packing With free nut

More information

Direct-operated 2/2-way solenoid valves Type EV210B

Direct-operated 2/2-way solenoid valves Type EV210B Data sheet Direct-operated 2/2-way solenoid valves Type EV20B EV20B covers a wide range of direct-operated 2/2-way solenoid valves for universal use. EV20B is a very robust valve program with high performance

More information

Solenoid valves 2/2-way direct-operated type EV210A

Solenoid valves 2/2-way direct-operated type EV210A MAKING MODERN LIVING POSSIBLE Data sheet Solenoid valves 2/2-way direct-operated type EV210A EV210A covers a wide range of small, direct-operated 2/2-way solenoid valves for use in industrial machinery.

More information

Model Selection 1. Process Valves

Model Selection 1. Process Valves Process Valves Model Selection For product specifications such as maximum operating pressure differentials and operating temperature ranges, refer to the relevent pages of each product. Air, Inert gas

More information

Check-Q-meter. Table of contents. Features. Functions. RE 27551/ /10 Replaces: Type FD

Check-Q-meter. Table of contents. Features. Functions. RE 27551/ /10 Replaces: Type FD Check-Q-meter RE /0.0 /0 Replaces: 09.9 Type FD Nominal size... Series ax. Operating pressure 0 bar ax. Flow 0 l/min K9/ Table of contents Contents Page Features Functions Ordering details Symbols Functional

More information

FVBSS fixed volume bottle

FVBSS fixed volume bottle N FVBSS fixed volume bottle Sampling System The SENSOR Fixed Volume Bottle Sampling System (FVBSS) provides a repeatable fixed volume of sample during each sampling process without stopping flow of the

More information

Commercial Generator Parts Catalog. PROTEC Series

Commercial Generator Parts Catalog. PROTEC Series Commercial Generator Parts Catalog PROTEC Series YD ÁÁ ÁÁ To avoid errors or delay in filling your parts order, always give the MODEL, SPEC NO. and SERIAL NO. from the Onan nameplate. For handy reference,

More information

P303 Pressure Regulator

P303 Pressure Regulator P0 Pressure Regulator Minimize Sudden Downstream Load Change Wide Pressure Ranges Integral Monitoring The BelGAS P0 and P0H gas pressure reducing regulators are available with a true monitor regulator,

More information

MPF SERIES RETURN FILTER

MPF SERIES RETURN FILTER MPF SERIES The series of filters MPF has specifically been designed for use on mobile applications, agricultural machinery and power units. The MPF filter range is suitable for flow rates up to 750 l/min.

More information

/2 way valves (solenoid actuated diaphragm with forced lifting) 1/4... 2

/2 way valves (solenoid actuated diaphragm with forced lifting) 1/4... 2 / way valves (solenoid actuated diaphragm with forced lifting) /4... Damped operation Operation without differential Suitable for vacuum igh flow rate For systems with low or fluctuating Brass body Wide

More information

VDN2.. VEN2.. VUN2.. Radiator valves. Building Technologies HVAC Products ACVATIX TM. NF norm, for 2-pipe heating systems

VDN2.. VEN2.. VUN2.. Radiator valves. Building Technologies HVAC Products ACVATIX TM. NF norm, for 2-pipe heating systems 06 EN - Straight valves VDN.. Angle valves VEN.. Reverse angle valves VUN.. ACVATIX TM Radiator valves NF norm, for -pipe heating systems VDN.. VEN.. VUN.. Valve bodies made of brass, mat nickel-plated

More information

Low Profile Slide Table

Low Profile Slide Table Low Profile Slide Table Series ø, ø, ø1, ø Low-profile and compact type, air slide table with the construction of guide and cylinder aligned in parallel. Neat appearance Protecting stopper section with

More information

Pilot operated 2 port solenoid valve (general purpose valve) Standard specifications NC (normally closed) type C C. 2 /s) Starting

Pilot operated 2 port solenoid valve (general purpose valve) Standard specifications NC (normally closed) type C C. 2 /s) Starting 21/22 Series (general purpose valve) 21/22 Series NC (normally closed) type, NO (normally open) type Port size: Rc1 1/4 to Rc2, 32 to 50 flange iaphragm structure JIS symbol 21: Common specifications Item

More information

Instructions for Parts Books

Instructions for Parts Books Instructions for Parts Books The heading at the top of the page will be the same for the picture of the parts at it is for the page with the part numbers. Definition of column headings on part number pages:

More information

Automatic Level Maintenance Manual SAL-XX W/ AIR DAMPENED COMPENSATOR

Automatic Level Maintenance Manual SAL-XX W/ AIR DAMPENED COMPENSATOR Automatic Level Maintenance Manual SAL-XX W/ AIR DAMPENED COMPENSATOR CST/Berger 2001 SAL 20/24/28/32 PAGE 1 REV. C 071803 Automatic Level Maintenance Manual User Calibration and Testing... 3 Circular

More information

PRESSURE GAUGE SELECTORS

PRESSURE GAUGE SELECTORS PRESSURE GUGE SELECORS Gauge isolator valves are designed to protect pressure gauges from pressure shocks when the pressure reading is not required; after each reading setting the selector to the closed

More information

Operating Instructions for Digital Manometer. Model: MAN-SD

Operating Instructions for Digital Manometer. Model: MAN-SD Operating Instructions for Digital Manometer Model: MAN-SD 1. Contents 1. Contents...2 2. Note...3 3. Instrument Inspection...3 4. Regulation Use...4 5. Operating Principle...4 6. Mechanical Connection...5

More information

CKA Series. 3-way jaw thin chuck double acting/single acting. Operational stroke length: 5, 6, 7, 9, 20, 25, 30, 38mm.

CKA Series. 3-way jaw thin chuck double acting/single acting. Operational stroke length: 5, 6, 7, 9, 20, 25, 30, 38mm. G G B A S F J L L H LB N/ S/F Specifications Descriptions Size Cylinder bore size Operating method Working fluid Max. working pressure Min. working pressure Ambient temperature Port size Operational stroke

More information

The 505F Series 3/4/5-Way Ball Valve. Standard Features and Benefits. Operating Conditions. Specifications. Options

The 505F Series 3/4/5-Way Ball Valve. Standard Features and Benefits. Operating Conditions. Specifications. Options The 505F Series //5-Way Ball Valve The 505F is a true multi-way ball valve with balanced fourseat construction. This full port valve is available in a variety of flow plans which can replace multiple two-way

More information

Fluid Cooling Industrial PF Series

Fluid Cooling Industrial PF Series Fluid Cooling Industrial PF Series 0916 STAINLESS STEEL PLATES CARBON STEEL FRAME Performance Notes Carry bar Gasketed plate style heat exchanger Tie rods Oil to water applications High performance Pressure

More information

Shock Absorber. Absorbing impact and noise. Shock absorber. Series D- -X. Shock absorber: RB series Coolant resistant type: RBL series

Shock Absorber. Absorbing impact and noise. Shock absorber. Series D- -X. Shock absorber: RB series Coolant resistant type: RBL series hock Absorber RB eries Absorbing impact and noise Dampening to meet the high speed requirements of the modern world. hock absorber: RB series oolant resistant type: RBL series hock absorber Automatic adjustment

More information

Cartridge Valves Technical Information. Quick reference

Cartridge Valves Technical Information. Quick reference Quick reference Contents CPF0... 8. CP600-5... 8. CP60-5... 8. 066 handle kit... 8.5 MP06... 8.6 MP... 8.6 X05-FD0 Traction manifold... 8.9 X05-FD6 Traction manifold... 8.0 X05-FD0 Traction manifold...

More information

Vane Type Rotary Actuators Series Variations

Vane Type Rotary Actuators Series Variations Vane Type Rotary Actuators Series Variations Vane Type Exterior CRB Series 0,, 0,, CRBU Series 0,, 0,, CRB Series, 6, 80, Has a compact body with exterior dimensions that do not change regardless of the

More information

C-Lube Linear Way ML ML MLF

C-Lube Linear Way ML ML MLF Maintenance ree & U.S. PTTD C-Lube Linear ay Variation of C-Lube Linear ay Shape Length of slide unit Model code C-Lube Linear ay is a linear motion rolling guide, incorporating the C-Lube as a components

More information

BINOCULAR STEREOSCOPIC MICROSCOPE MBS-10. User Manual

BINOCULAR STEREOSCOPIC MICROSCOPE MBS-10. User Manual BINOCULAR STEREOSCOPIC MICROSCOPE MBS-10 User Manual ATTENTION! Мicroscope design may differ somewhat from description in this manual. 2 1 - PURPOSE The MBS-10 microscope is intended for observing both

More information

DMHP3(4)L(T)2A00 Series

DMHP3(4)L(T)2A00 Series STANDARDS Valve body: ASME B16.34 Material certification: EN10204-3.1 MTR Quality assurance: ISO 9001:2008 Steel casting: MSS SP-55 Valve marking: MSS SP-25 Valve test: API 598 Direct mount: ISO 5211 End

More information

Universal type Port size: M5, Rc1/8, Rc1/4. Max. working. pressure

Universal type Port size: M5, Rc1/8, Rc1/4. Max. working. pressure irect acting port solenoid valve for compressed air, manifold (special purpose valve) Series Universal type Port size: M, Rc/, Rc/ Refer to nding for more details. JIS symbol ommon supply / common exhaust

More information

Made in Italy HOSE REELS CATALOGUE TECHNOLOGY FOR FLUIDYNAMICS. No. E14/A1

Made in Italy HOSE REELS CATALOGUE TECHNOLOGY FOR FLUIDYNAMICS. No. E14/A1 Made in Italy HOSE REELS CATALOGUE TECHNOLOGY FOR FLUIDYNAMICS No. E14/A1 The complete range of our products is presented in the specific catalogues: HOSE REELS CATALOGUE No. E14/A2 HOSE REELS CATALOGUE

More information

2.9. Namur Valves 2.9. page 175. Namur 1/4 also called Namur 1 in accordance to VDI / VDE Namur 1/2 also called Namur 2.

2.9. Namur Valves 2.9. page 175. Namur 1/4 also called Namur 1 in accordance to VDI / VDE Namur 1/2 also called Namur 2. 2.9 page 175 Namur 1/4 also called Namur 1 in accordance to VDI / VDE 3845. Namur 1/2 also called Namur 2. 2.9 Namur Valves + Selected models are available for low temperature application. Temperature-range:

More information

K 080/12 F 10 K 3-2X/.. Features

K 080/12 F 10 K 3-2X/.. Features RE 2 1/11.02 Replaces: 0.2 Fine throttle Type F Nominal sizes and Series 2X and 3X Maximum operating pressure 2 bar Maximum flow 0 L/min K 00/12 F K 3-2X/.. K 0/ F P 3-3X/.. Overview of contents Contents

More information

180 Angular Gripper. Series MHY2/MHW2. Cam actuation style is now standardised! 5-241

180 Angular Gripper. Series MHY2/MHW2. Cam actuation style is now standardised! 5-241 18 Angular Gripper Cam tyle Rack & Pinion tyle eries MHY2/MHW2 Cam actuation style is now standardised! -21 18 Angular Gripper Cam tyle Rack & Pinion tyle eries MHY2/MHW2 eries MHY/Cam tyle Light and compact

More information

Mil-Stak PT/2016 PARTS MANUAL

Mil-Stak PT/2016 PARTS MANUAL Mil-Stak PT/0 PARTS MANUAL Mil-Stak Inc. 0 Hwy 0 West Fruitland Idaho Phone 0--0 ext - Main Assemblies ITEM PAGE P00 P00 P0 P0 PT 0 P00 Wheel Assembly Valve Block Frame Assembly PT Stackbed Assembly Receiving

More information

98 Series Backpressure Regulators and Relief Valves

98 Series Backpressure Regulators and Relief Valves 9 Series Backpressure Regulators and Relief Valves Bulletin.:9 November 09 W TYPE 9H W TYPE 9LD Figure. Typical 9 Relief Valves Introduction W TYPE 9HD The 9 Series (Figure ) is used for backpressure or

More information

Cooler-Bypass Thermostat Valve, Size 10

Cooler-Bypass Thermostat Valve, Size 10 Cooler-Bypass Thermostat Valve, Size Q max = l/min, p max = bar Temperature-controlled, integral relief function Description These direct acting bypass thermostat valves are size, temperature controlled,

More information

Its modular concept allows to build up a ball valve for any degree of automation and any kind of application

Its modular concept allows to build up a ball valve for any degree of automation and any kind of application Type 2657...59 DN 10 up to 80 mm; Plastic; 2/2 way dvantages/benefits ntegrated pilot valves, position feed-back and limit switches available Customized system solutions with Burkert valves & sensors With

More information

Air Amplifers/Blowers

Air Amplifers/Blowers To meet a wide range of applications, air velocity and air flow are field adjustable to compensate for the pressure level supplied. CDF air amplifiers can achieve amplification ratios as high as 4:1 (output

More information

CV3000 Series. Characterized Insert Control Valves

CV3000 Series. Characterized Insert Control Valves CV3000 Series Characterized Insert Control Valves The CV3000 Series is a v-type control valve for precise control allowing high pressure drop capability with straight-through flow and bubble-tight shut

More information

OPERATION MANUAL. Acceleration, Velocity RMS measurement, Metric & Imperial unit PEN VIBRATION METER Model : PVB-820

OPERATION MANUAL. Acceleration, Velocity RMS measurement, Metric & Imperial unit PEN VIBRATION METER Model : PVB-820 Acceleration, Velocity RMS measurement, Metric & Imperial unit PEN VIBRATION METER Model : PVB-820 Your purchase of this PEN VIBRATION METER marks a step forward for you into the field of precision measurement.

More information

Front flange FLV. Max. [knm/stroke]

Front flange FLV. Max. [knm/stroke] SDN 45 Safety shock absorbers SDN are a low cost alternative to industrial shock absorbers appropriate to customers requirements. Typical applications: cranes, storage and retrieval unit for highbay warehouse,

More information

Metal oil filler and air breather filler caps. Bayonet connection. Reservoir holes. TA46 B (Materials)

Metal oil filler and air breather filler caps. Bayonet connection. Reservoir holes. TA46 B (Materials) Metal oil filler and air Series T 46 4 5 6 4 ayonet connection Ø 46 7 8 46 Reservoir holes T46 (Materials) M5 - Cover: Chrome Plated Steel - Filter element: Impregnated paper Polyurethane 64-6 - Flange:

More information

HRN/HRN-C Series Hydraulic Vane Rotary Actuators

HRN/HRN-C Series Hydraulic Vane Rotary Actuators HRN/ Hydraulic Vane Rotary Actuators Vane Actuators Tork-Mor HRN Contents Features... 2 Ordering Information... Engineering Data / Specifications... Dimensions... Features... 1 Ordering Information...12

More information

INSTALLATION INSTRUCTIONS ATV Plow Blade Part Number: (50 ), (54 ), or (60 ) Application: All Terrain Vehicles

INSTALLATION INSTRUCTIONS ATV Plow Blade Part Number: (50 ), (54 ), or (60 ) Application: All Terrain Vehicles INSTALLATION INSTRUCTIONS ATV Plow Blade Part Number: 78950 (50 ), 78954 (54 ), or 78960 (60 ) Application: All Terrain Vehicles Your safety, and the safety of others, is very important. To help you make

More information

Element description. Multipass test in compliance ISO Contaminant ISO MTD. A - Microfibre

Element description. Multipass test in compliance ISO Contaminant ISO MTD. A - Microfibre Style FZ Stainless Steel Pressure filter Technical data element Style In-Line filter: FZ 00-0 FZP 0 FZ 0 FZP 6 FZX 0 Manifold mounting: FZ 0 FZM 0 Max. working pressure: 700 bar Max. working pressure:

More information

S E G N A L F E IP P

S E G N A L F E IP P 9 8 PIPE FLANGES an excellence in engineering www.jbj.co.uk/ portflanges.html SAE standard, and 6, series flanges for screw or weld connection. Available for straight connection, fixed or swivel elbow

More information

KM-1600SWH KM-1600SRH KM-1600SWH3 KM-1600SRH3

KM-1600SWH KM-1600SRH KM-1600SWH3 KM-1600SRH3 NO. ISSUED: REVISED: 71193 OCT. 2, 2001 JAN. 27, 2003 HOSHIZAKI STACKABLE CRESCENT CUBER MODELS KM-1600SWH KM-1600SRH KM-1600SWH3 KM-1600SRH3 PARTS LIST KM-1600SWH L-0 June, 2001 M-0 Feb., 2002 M-1 Feb.,

More information

OPERATION MANUAL. Acceleration, Velocity RMS measurement, Metric & Imperial unit PEN VIBRATION METER Model : PVB-820

OPERATION MANUAL. Acceleration, Velocity RMS measurement, Metric & Imperial unit PEN VIBRATION METER Model : PVB-820 Acceleration, Velocity RMS measurement, Metric & Imperial unit PEN VIBRATION METER Model : PVB-820 Your purchase of this PEN VIBRATION METER marks a step forward for you into the field of precision measurement.

More information

Precision Ball Screw/Spline

Precision Ball Screw/Spline 58-2E Models BNS-A, BNS, NS-A and NS Seal Outer ring Shim plate Seal Spline nut Seal Collar Shim plate Seal End cap Ball Outer ring Ball screw nut Outer ring Ball Retainer Retainer Outer ring Point of

More information

Flow rates to 750 l/min

Flow rates to 750 l/min FP Maximum pressure 0 bar Flow rates to 70 l/min Technical data Filter housing (Materials) ead: Cast iron (chemical heat treatment) ousing: Steel (chemical heat treatment) Bypass valve: AISI L (FP 0-0)

More information

DMP 331P. Industrial Pressure Transmitter. Process Connections With Flush Welded Stainless Steel Diaphragm

DMP 331P. Industrial Pressure Transmitter. Process Connections With Flush Welded Stainless Steel Diaphragm DMP P Industrial Pressure Transmitter Process Connections With Flush Welded Stainless Steel accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 % FSO Nominal pressure from 0... 00 mbar up

More information

High Pressure Ball Valves

High Pressure Ball Valves High Pressure all Valves 0,, 0, 0,000 psi (0 bar),000 psi (0 bar) 0,000 psi ( bar) ITOK Group ITOK GmbH (Headquarter) Sprendlinger Landstr., 0 Offenbach am Main, Germany Tel.: + 00 ax: + 00 ITOK, Inc.

More information

ORTHOBLOC 3000 Drive systems Maintenance

ORTHOBLOC 3000 Drive systems Maintenance 15 en 284 261 282 113 130 120 061 002 264 193 099 001 25 063 65 119 112 133 252 254 1 115 118 04 ORTHOBLOC 3000 Maintenance NOTE LEROY-SOMER reserves the right to modify the characteristics of its products

More information

Direct Operated Type Solenoid Operated Proportional Directional Control Valve

Direct Operated Type Solenoid Operated Proportional Directional Control Valve Direct Operated Type Solenoid Operated Proportional Directional Control Valve Features These four-way proportional directional control valves enable control of the forward and reverse motion of an actuator.

More information

ER2 Short-head Electric Chain Hoist

ER2 Short-head Electric Chain Hoist O/M NO.SHER2-0903-CE-00 ER2 Short-head Electric Chain Hoist (250kg to 5t) Operation Manual (SHER2M/SHER2SG/SHER2SP) Introduction The KITO Short-head Electric Chain Hoist is intended for effective use in

More information

2/2-way ball valve with electric rotary actuator, ball valve in plastic, DN 10-50

2/2-way ball valve with electric rotary actuator, ball valve in plastic, DN 10-50 /way ball valve with electric rotary actuator, ball valve in plastic, N 50 Suitable for aggressive media High flow rate value Actuator with adjustable limit switches Visual position indicator Type 0 can

More information

Flow rates to 750 l/min

Flow rates to 750 l/min FP Maximum pressure 0 bar Flow rates to 70 l/min Technical data Filter housing (Materials) ead: Cast iron (chemical heat treatment) ousing: Steel (chemical heat treatment) Bypass valve: AISI L (FP 00-0)

More information

5. DRIVE 1. SAFETY 2. PREPARATION 3. FRAME 4. TRANSMISSION 6. ROW UNIT 7. OPTIONAL EQUIPMENT

5. DRIVE 1. SAFETY 2. PREPARATION 3. FRAME 4. TRANSMISSION 6. ROW UNIT 7. OPTIONAL EQUIPMENT TABLE OF CONTENTS 1. SAFETY 2. PREPARATION 3. FRAME 4. TRANSMISSION 5. DRIVE 6. ROW UNIT 7. OPTIONAL EQUIPMENT DRIVE Standard Turbofan 540, 450 & 1000 RPM with PTO Drive Your Monosem planter will be equipped

More information

Experiment (4): Flow measurement

Experiment (4): Flow measurement Experiment (4): Flow measurement Introduction: The flow measuring apparatus is used to familiarize the students with typical methods of flow measurement of an incompressible fluid and, at the same time

More information

High Power Cylinder. RHC Series. ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100. REA REB REC Smooth MQ RHC RZQ D- -X. Low Speed

High Power Cylinder. RHC Series. ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100. REA REB REC Smooth MQ RHC RZQ D- -X. Low Speed High Power ylinder RH Series ø, ø, ø3, ø4, ø, ø, ø8, ø RE RE RE RH 34 High power cylinder: cushioning for high speed operation (3 low/medium speed operation with heavy loads The capacity to absorb to times

More information

Maximum pressure 420 bar Flow rate to 152 l/min. 560 bar. 140 l/min. Flow rate l/min FMM 050 1/2 1,50 3/4 1,00. Δp bar 0,50 0,00 FHA 051 1,50 1,00

Maximum pressure 420 bar Flow rate to 152 l/min. 560 bar. 140 l/min. Flow rate l/min FMM 050 1/2 1,50 3/4 1,00. Δp bar 0,50 0,00 FHA 051 1,50 1,00 FMM 00 Maximum pressure 0 bar Flow rate to l/min FHA 0 Maximum pressure 60 bar Flow rate to 0 l/min Technical data FMM 00 Filter housing (Materials) Head: Cast iron (chemical heat treatment) Housing: Steel

More information

ED 701 General Industry Pressure Transmitter

ED 701 General Industry Pressure Transmitter ED 701 General Industry Pressure Transmitter Standard industrial process connections Complete range of electrical connections 4... 20 ma and Voltage outputs Accuracy: 0.1%, 0.2% and 0.4% FS Quick response

More information

Nylon oil filler and air breather filler caps

Nylon oil filler and air breather filler caps Series TP 0 Dimensions 6 Bayonet G / TP0 (Materials) - Cover/ringnut: Nylon - Filter element: Impregnated paper Polyurethane - Pressurisation valve: Nylon Galvanised Steel - Seal: Reservoir holes - Flange:

More information

SRL3. Rodless cylinder. Rodless type. ø12 ø16 ø20 ø25 ø32 ø40 ø50 ø63 ø80 ø100

SRL3. Rodless cylinder. Rodless type. ø12 ø16 ø20 ø25 ø32 ø40 ø50 ø63 ø80 ø100 Overview High load and long service life. that can operate at high speeds. Ample variation with sizes available from ø to ø00. eatures lat cylinder lat piston with a structure that could take on the load.

More information

SECTION 1 - WHAT IS A BTU METER? BTU's = Flow x ΔT Any ISTEC BTU Meter System consists of the following main components:

SECTION 1 - WHAT IS A BTU METER? BTU's = Flow x ΔT Any ISTEC BTU Meter System consists of the following main components: SECTION 1 - WHAT IS A BTU METER? ISTEC BTU Meters measure energy usage by multiplying flow rate and temperature difference. As the water (or other liquid) passes through these lines, the multi-wing turbine

More information

Features of the Jergens Zero-Point Mounting System

Features of the Jergens Zero-Point Mounting System Features of the Jergens Zero-Point Mounting System Typical applications for the Jergens Zero-Point System: 1.36 ZERO POINT MOUNTING SYSTEM Pull Studs and Engagement Screws Pages 1.42-1.43 Clamping Plates

More information

WIREWAY & TROUGH. Lay-In Type 12 Wireway... WWY 1-2. Feed-Through Type 12 Wireway... WWY 3-4. Hinge/Screw Cover Wiring Trough...

WIREWAY & TROUGH. Lay-In Type 12 Wireway... WWY 1-2. Feed-Through Type 12 Wireway... WWY 3-4. Hinge/Screw Cover Wiring Trough... ourtesy of Steven Engineering, Inc.! 230 Ryan Way, South San Francisco, 94080-6370! ain Office: (650) 588-9200! Outside Local rea: (800) 258-9200! www.stevenengineering.com W IREWY & TROU WIREWY & TROU...

More information

Serie B2.1. Flanged ductile iron ball valve. made in. Application fields. Shut-off valves E U R O P E. 18

Serie B2.1. Flanged ductile iron ball valve. made in. Application fields. Shut-off valves E U R O P E. 18 erie B. Flanged ductile iron ball valve BRanDOni made in E U R O P E Application fields WATER CONdITIONING GA EATING INdUTRY FIRE FIGTING www.brandoni.it erie B. eries B. valves are shut-off ball valves

More information

Installation, Maintenance and Operating Instructions

Installation, Maintenance and Operating Instructions Trunnion-Design Ball Valves 12 20 (DN 300 500) Series 7150 12 (DN 300) Series 730S 12 20 (DN 300 500) Series 7300 14 24 (DN 350 600) Series 9150 14 24 (DN 350 600) Series 9300 Installation, Maintenance

More information

AIR BREATHER FILTERS. Temperature from -25 to +100 C

AIR BREATHER FILTERS. Temperature from -25 to +100 C IR BRETHER FILTERS The comprehensive series of breather filters makes it possible to meet all market demands. Metal and plastic styles suitable for use on mobile equipment are available. The function of

More information

STAINLESS STEEL FILTER

STAINLESS STEEL FILTER STINLSS STL FILTR Style FZ Stainless Steel Pressure filter Technical data Style In-Line filter: FZ 00-0 FZP 0 FZ 0 FZP 6 FZX 0 Manifold mounting: FZ 0 FZM 0 Max. working pressure: 700 bar Max. working

More information