CKA Series. 3-way jaw thin chuck double acting/single acting. Operational stroke length: 5, 6, 7, 9, 20, 25, 30, 38mm.

Size: px
Start display at page:

Download "CKA Series. 3-way jaw thin chuck double acting/single acting. Operational stroke length: 5, 6, 7, 9, 20, 25, 30, 38mm."

Transcription

1 G G B A S F J L L H LB N/ S/F Specifications Descriptions Size Cylinder bore size Operating method Working fluid Max. working pressure Min. working pressure Ambient temperature Port size Operational stroke length Rod diameter Capacity of reciprocating Repeatability Product weight Lubrication MPa MPa C Switch specifications Descriptions Applications Output method Power voltage Load voltage/current Light Leakage current cm kg double acting/single acting A Series CS.. Proximity wire TH/V Prograable controller - - to VDC, to ma (Note 1) LED (ON lighting) 1mA or less Operational stroke length:,,,,,,, A CS CS CS CS Double acting/single acting Compressed air.. to M Not required (use turbine oil Class 1 ISO VG for lubrication) Proximity wire TH/V Prograable controller, relay NPN output to VDC VDC or less, ma or less A or less If switch ambient temperature is higher than C, to ma at C for T type, while to 1mA at C for S type. Note 1: The maximum load current above is the value at C. (Note) Refer to 1 for the specifications details of the switch. CS.. CS..

2 How to order Without switch A A How to order switch (T type switch) A Size <Example of model number> A--O-TH-R B Option Note 1, Note C Note * indicates lead wire length. Model: Thin chuck A Size : B Option : Single acting, normally open type C : Proximity TH switch, lead wire 1m D Switch quantity : One on open side O O TH Note on model no. selection Note 1: Y11 and Y1 are available for A-, while Y11, Y1 and Y1 are available for A-CS to CS, and Y11 and Y1 are available for A-CS. Note : Refer to pages to for the dimensions and applicable model of the small jaw. When ordering as option, pieces are provided. Note : Switches other than C switch model no. are available. (Custom order) Refer to 1 for details. SW TH (Item above C ) R D Switch quantity Symbol A Size CS CS CS CS CS CS CS B Option Blank O C C Y11 Y1 Y1 Y A-CS to CS For switch T*H* Switch body + mounting bracket A TH A R H D (Item above C ) TV Descriptions A Series How to order Standard (double acting) Single acting (normally open) Single acting (normally closed) With small jaw material (SC) Outer mount chuck (small jaw No.: to, to ) With small jaw material (SC) Inner mount chuck (small jaw No.: to ) With small jaw material (MC nylon) Outer mount chuck (small jaw No.: to, to ) With small jaw material (MC nylon) Inner mount chuck (small jaw No.: to ) Axial lead wire Radial lead wire Contact TH* TH* TV* TV* *Lead wire length Blank 1m (standard) m (option) m (option) D Switch quantity One on open side One on closed side Two A-CS to CS Mounting bracket A T For switch T*V* Switch body + mounting bracket Mounting bracket * A TV * Indicator Proximity 1 color indicator type Lead wire -wire -wire G G B A S F J L L H LB N/ S/F Chuck (Item above C ) (Select either R (open) or H (closed) for sections marked with an asterisk (*).) Note: When the type with two switches is selected, if the model has a short operation stroke, both switches may turn on depending on the workpiece size.

3 A Series A- standard/o/c. 11. (1.) G G 1 -M depth h. (.) (.) M M 1 B. MAX 1 MIN +. 1h -M depth P.C.D. A S A-CS standard/o/c 1. (.) F J h L L H LB N/ S/F. -M depth +. M M MAX MIN. h () () 1 -M depth 1 P.C.D.

4 A Series A-CS standard/o/c h.. (.) M M G -M depth. +. () 1 1 () h G B MAX 1 MIN. 1 -M depth 1 P.C.D. A-CS standard/o/c 1 () A h S F J M M L L H 1 -M depth. +. MAX MIN.. () 1 (1) h 1 -M depth 1 P.C.D. LB N/ S/F Chuck

5 A Series A-CS standard/o/c 1 () G G B -M depth h +. max min1 M M -M depth 1 P.C.D. A-CS standard/o/c Dimension in ( ) for [normally closed] specifications A 1 S F J h L L H M M LB N/ S/F 1 -M depth (1). 1 () max. min 1 h h +.. (1) () h 1 -M depth 1 P.C.D. -M depth 1 P.C.D. for mounting -M depth 1 P.C.D. for mounting

6 A-CS standard/o/c Dimension in ( ) for C [normally closed] specifications A-CS standard/o/c h. (.) Dimension in ( ) for C [normally closed] specifications -M depth 1 1 (1). 1.. (.) 1 MAX MIN1 h -M depth MAX MIN h. (.) (1).. 1. (1.) 1h h M depth P.C.D.11 for mounting h M depth P.C.D.1 for mounting -M depth P.C.D. for mounting -M depth P.C.D.11 for mounting A Series G G B A S F J L L H LB N/ S/F Chuck

7 A Series G G B A S F J L L H LB N/ S/F Internal structure and parts list No. 1 A- Standard (double acting) type O (normally open) type C (normally closed) type 1 Standard (double acting) type O (normally open) type C (normally closed) type Standard (double acting) / O (normally open) type 11 1 (Only O type) Parts name Body Cylinder Piston A Piston B Piston C Arm Master key A-CS to CS A-CS to CS 1 Material No Parts name Fulcrum axis Center guard Piston packing seal Rod packing seal Cylinder gasket O cylinder O spring Material Nitrile rubber Nitrile rubber Nitrile rubber No C (normally closed) type 1 1 Parts name Material No. Parts name Material C cylinder C piston rod C spring Magnet Stopper pin Chuck guard O piston B Plastic magnet Cylinder guard Snap ring O, C body Piston Note) Structures are slightly different depending on the model.

ø6, ø10, ø15, ø20, ø25, ø32, ø40, ø50, ø63 How to Order Switch rail Nil Standard stroke Refer to page 12 for standard stroke.

ø6, ø10, ø15, ø20, ø25, ø32, ø40, ø50, ø63 How to Order Switch rail Nil Standard stroke Refer to page 12 for standard stroke. Magnetically Coupled Rodless Cylinder: Direct Mount ype Series ø, ø, ø, ø, ø, ø, ø, ø0, ø Direct mount type mm mm mm mm mm mm mm 0 0 mm mm 00 MB Piping type Both sides piping type Centralized piping type

More information

Specifications. Stroke length. Small direct mounting cylinder MDC2 Series. Port size: M3 (For 4, 6, 8 mm bore) M5 (For 10 mm bore) Descriptions

Specifications. Stroke length. Small direct mounting cylinder MDC2 Series. Port size: M3 (For 4, 6, 8 mm bore) M5 (For 10 mm bore) Descriptions mall direct mounting cylinder 2 eries ort size: (or,, mm bore) (or mm bore) I symbol ingle acting spring return type ingle acting spring extend type ouble acting VI. pecifications escriptions ore size

More information

Bore size: 4, 6, 8, 10. Double acting. Double acting Compressed air Withstanding pressure Ambient temperature Port size

Bore size: 4, 6, 8, 10. Double acting. Double acting Compressed air Withstanding pressure Ambient temperature Port size *2 2 2 G 2 V2 /V2 V 2 * * U U G U2 2 U 2 G pecifications troke length ore size ylinder switch specifications escriptions pplications utput method ower voltage oad voltage oad current urrent consumption

More information

Free Mount Cylinder Double Acting, Double Rod. ø6, ø10, ø16, ø20, ø25, ø32. How to Order. Action. D Double acting. Standard stroke (mm)

Free Mount Cylinder Double Acting, Double Rod. ø6, ø10, ø16, ø20, ø25, ø32. How to Order. Action. D Double acting. Standard stroke (mm) ouble Acting, ouble Rod eries CUW ø, ø, ø1, ø, ø2, ø How to Order CUW With auto switch CUW MBW Built-in magnet ouble rod 1 2 mm mm 1 mm mm 2 mm mm Action ouble acting Number of auto switches Nil 2 pcs.

More information

10A-2 AB 299 AB A-2. Double rod type Adjustable stroke (retraction side) Double acting type. Series variations. Series. Cylinder bore

10A-2 AB 299 AB A-2. Double rod type Adjustable stroke (retraction side) Double acting type. Series variations. Series. Cylinder bore -2-2 9 Series variations ouble acting type ouble rod type djustable stroke (retraction side) Standard type Switch Set VL Set SV Set Standard type VL Set Standard type VL Set Series -2-2R -2V2-2K2-2 -2V2-22

More information

35P-3 HH 3 HH 2 35P-3. f32 f40. f50 f63. f80 f100. Switch Set. Type Standard type Switch Set

35P-3 HH 3 HH 2 35P-3. f32 f40. f50 f63. f80 f100. Switch Set. Type Standard type Switch Set f f f f f f Kind of piston seal U seal Slipper Seal U seal Slipper Seal Nominal pressure. MPa Maximum allowable pressure. MPa Proof test pressure MPa Minimum operating pressure. MPa or less Working speed

More information

35RP2 35RP2 HM 2 HM 3 35RP2. Type. Series Variation. Rack and pinion type Bore (mm) Rotating angle Angle adjustment.

35RP2 35RP2 HM 2 HM 3 35RP2. Type. Series Variation. Rack and pinion type Bore (mm) Rotating angle Angle adjustment. 2 3 Type Series Variation Rack and pinion type (mm) 3243 1 ngle adjustment Rated torque 32Nm 4Nm 22Nm (at 3. MPa) 343Nm 4Nm Maximum allowable pressure 3. MPa Proof test pressure MPa Minimum operating pressure.

More information

Series MHY2/MHW Angular Gripper. Cam actuation style is now standardized! MHZ2 MHZJ2 MHQ MHL2 MHR MHK MHS MHC2 MHT2 MHY2 MHW2 MRHQ 2.

Series MHY2/MHW Angular Gripper. Cam actuation style is now standardized! MHZ2 MHZJ2 MHQ MHL2 MHR MHK MHS MHC2 MHT2 MHY2 MHW2 MRHQ 2. 18 Angular Gripper Cam Style Rack & Pinion Style Series / Cam actuation style is now standardized! 2.8-1 18 Angular Gripper 18 Angular Gripper Series / Cam Style Rack & Pinion Style Series / Series MHY/Cam

More information

How to Order M9BW. Action D Double acting. Load voltage M9NWV M9NW 5 V, 12 V 5 V, 24 V 12 V M9BWV M9BW 12 V 12 V M9NAV M9NA 5 V, 12 V 12 V.

How to Order M9BW. Action D Double acting. Load voltage M9NWV M9NW 5 V, 12 V 5 V, 24 V 12 V M9BWV M9BW 12 V 12 V M9NAV M9NA 5 V, 12 V 12 V. arallel Style Air ripper/-inger Type Series MHS ø1, ø, ø, ø, ø, ø, ø, ø, ø1, ø How to rder Bore size ø1 to ø Number of fingers fingers MHS Bore size 1 1 mm mm mm D MBW Action D Double acting Auto switch

More information

SRL3. Rodless cylinder. Rodless type. ø12 ø16 ø20 ø25 ø32 ø40 ø50 ø63 ø80 ø100

SRL3. Rodless cylinder. Rodless type. ø12 ø16 ø20 ø25 ø32 ø40 ø50 ø63 ø80 ø100 Overview High load and long service life. that can operate at high speeds. Ample variation with sizes available from ø to ø00. eatures lat cylinder lat piston with a structure that could take on the load.

More information

HRN/HRN-C Series Hydraulic Vane Rotary Actuators

HRN/HRN-C Series Hydraulic Vane Rotary Actuators HRN/ Hydraulic Vane Rotary Actuators Vane Actuators Tork-Mor HRN Contents Features... 2 Ordering Information... Engineering Data / Specifications... Dimensions... Features... 1 Ordering Information...12

More information

HDF series - PARALLEL GRIPPER

HDF series - PARALLEL GRIPPER Operation specification and Ordering expression Internal structure DS Angular DM 0 Angular Specification ore size Type of operation Fluid Pressure range Range of service temperature kgf/cm (kpa) Max. operation

More information

10B-6 10B-6 AB 241 AB B-6 10B-6. Stroke Range. Double. type. Cylinder bore. Double brake type. Single brake type 10B-6. Cylinder bore (mm)

10B-6 10B-6 AB 241 AB B-6 10B-6. Stroke Range. Double. type. Cylinder bore. Double brake type. Single brake type 10B-6. Cylinder bore (mm) 0 B- B- 1 Standard type, Switc Set Type Single brake type ouble brake type Series B- B- Cylinder bore (mm) Working fluid Lubrication Working pressure range roof test pressure Working speed range Working

More information

100Z-1 100Z-1 51 HA 50. Cushion ring Cushion ring. Type. Standard type. Switch Set

100Z-1 100Z-1 51 HA 50. Cushion ring Cushion ring. Type. Standard type. Switch Set 0Z-1 0Z-1 51 Type Nominal pressure Maximum allowable pressure Proof test pressure Minimum operating pressure Working speed range Working temperature range (ambient/fluid temperature) Structure of cushioning

More information

Rotary modules.

Rotary modules. Rotary modules www.comoso.com www.comoso.com Rotary modules ROTARY MODULES Series Size Page Rotary modules RM swivel unit 156 RM 08 160 RM 10 162 RM 12 164 RM 15 168 RM 21 172 RM rotor 176 RM 50 180 RM

More information

E8EB-N0C2B E8EB-N0B2B

E8EB-N0C2B E8EB-N0B2B Slim Sensor CSM DS_E 1 Ideal for Workpiece Position and Original Checking The to 1 kpa model can be used for workpiece position checking. The to 1MPa model is ideal for original pressure checking. Degree

More information

AME Model. (1) Rated flow (l/min (ANR)) Port size (Nominal size B) Weight (kg)

AME Model. (1) Rated flow (l/min (ANR)) Port size (Nominal size B) Weight (kg) Super Mist Separator Series AME Series AME separates and absorbs aerosol state fine oil particles in compressed air and changes the oil lubricating compressed air to oilless equivalent air. It should be

More information

180 Angular Gripper. Series MHY2/MHW2. Cam actuation style is now standardised! 5-241

180 Angular Gripper. Series MHY2/MHW2. Cam actuation style is now standardised! 5-241 18 Angular Gripper Cam tyle Rack & Pinion tyle eries MHY2/MHW2 Cam actuation style is now standardised! -21 18 Angular Gripper Cam tyle Rack & Pinion tyle eries MHY2/MHW2 eries MHY/Cam tyle Light and compact

More information

Vane Type Rotary Actuators Series Variations

Vane Type Rotary Actuators Series Variations Vane Type Rotary Actuators Series Variations Vane Type Exterior CRB Series 0,, 0,, CRBU Series 0,, 0,, CRB Series, 6, 80, Has a compact body with exterior dimensions that do not change regardless of the

More information

Description Quantity Opening Weight Max Rating 01/4721 Hydraulic Grip supplied with no faces, Single actuator, 15mm Pair Face 15Kg 60kN 315 bar

Description Quantity Opening Weight Max Rating 01/4721 Hydraulic Grip supplied with no faces, Single actuator, 15mm Pair Face 15Kg 60kN 315 bar A Hydraulic grip with single actuator, single actuator grips have one side adjusted by manual tightening action screw and the grips are suitable for offset sample alignment for shear testing Ideal for

More information

Design and Modeling of Fluid Power Systems ME 597/ABE Lecture 7

Design and Modeling of Fluid Power Systems ME 597/ABE Lecture 7 Systems ME 597/ABE 591 - Lecture 7 Dr. Monika Ivantysynova MAHA Professor Fluid Power Systems MAHA Fluid Power Research Center Purdue University Content of 6th lecture The lubricating gap as a basic design

More information

Universal type Port size AS13 1F-M3. M3 x 0.5 M5 x 0.8 AS23 1F-01 AS23 1F-02 AS33 1F-02 AS33 1F-03 AS43 1F-04 R 1/8 R 1/4 R 1/4 R 3/8 R 1/2

Universal type Port size AS13 1F-M3. M3 x 0.5 M5 x 0.8 AS23 1F-01 AS23 1F-02 AS33 1F-02 AS33 1F-03 AS43 1F-04 R 1/8 R 1/4 R 1/4 R 3/8 R 1/2 Minimizes installation time and cost Reduces the mounting height and enables compact machinery design. Effective area is larger than the former model. Tube swivels 0 Universal type permits 0 piping swivel.

More information

Low Profile Slide Table

Low Profile Slide Table Low Profile Slide Table Series ø, ø, ø1, ø Low-profile and compact type, air slide table with the construction of guide and cylinder aligned in parallel. Neat appearance Protecting stopper section with

More information

Flow rates to 485 l/min

Flow rates to 485 l/min FB Maximum pressure 0 bar Flow rates to 8 l/min Technical data Filter housing (Materials) ead: Cast iron (chemical heat treatment) ousing: Steel (chemical heat treatment) Bypass valve: Steel Check valve:

More information

Lecture 5. Labs this week: Please review ME3281 Systems materials! Viscosity and pressure drop analysis Fluid Bulk modulus Fluid Inertance

Lecture 5. Labs this week: Please review ME3281 Systems materials! Viscosity and pressure drop analysis Fluid Bulk modulus Fluid Inertance Labs this week: Lab 10: Sequencing circuit Lecture 5 Lab 11/12: Asynchronous/Synchronous and Parallel/Tandem Operations Please review ME3281 Systems materials! 132 Viscosity and pressure drop analysis

More information

Modular Style Air Combination. Assembled by simply tightening the screws

Modular Style Air Combination. Assembled by simply tightening the screws Modular Style Air Combination Series AC Assembled by simply tightening the screws High strength die cast bracket Drain cock for one push drain exhaust Oil needle for easy oil volume adjustments The improved

More information

2-way proportional throttle valve for block installation

2-way proportional throttle valve for block installation -way proportional throttle valve for block installation Types FES; FESE Sizes to Component series X Maximum operating pressure bar Maximum flow 800 l/min at Δp = 0 bar Table of contents Contents Page Features

More information

SPARE PARTS LIST CHAIN SAWS CS35S, & ,

SPARE PARTS LIST CHAIN SAWS CS35S, & , SPARE PARTS LIST CHAIN SAWS CS35S, 967624714 & 967624715,2016-08 Revision Note item Position description Revision 1 combine 14"easy start CS 35S & CS 35S FA 2 Page O change the article no. from 586998601

More information

Type Plunger Height x pitch Operating force (OF) Without ground terminal Flat type 4.3 x 6.5 mm General 0.98 N (100 gf) B3F-6000 B3F-6100

Type Plunger Height x pitch Operating force (OF) Without ground terminal Flat type 4.3 x 6.5 mm General 0.98 N (100 gf) B3F-6000 B3F-6100 Mechanical Key Switch (Ral) B3F- Taped Ral Switches Automatic mounting possible via general- ral taped component inserters. Conform to EIAJ RC 1008A Electronic Component Taping Dimensions. The same snap-action

More information

Odor Removal Filter Series AMF

Odor Removal Filter Series AMF Odor Removal Filter Series AMF Series AMF Odor Removal Filter efficiently removes odor in compressed air with an activated carbon element. The unit is designed for use in food processing, pharmaceutical,

More information

CV3000 Series. Characterized Insert Control Valves

CV3000 Series. Characterized Insert Control Valves CV3000 Series Characterized Insert Control Valves The CV3000 Series is a v-type control valve for precise control allowing high pressure drop capability with straight-through flow and bubble-tight shut

More information

Maximum pressure 420 bar Flow rate to 152 l/min. 560 bar. 140 l/min. Flow rate l/min FMM 050 1/2 1,50 3/4 1,00. Δp bar 0,50 0,00 FHA 051 1,50 1,00

Maximum pressure 420 bar Flow rate to 152 l/min. 560 bar. 140 l/min. Flow rate l/min FMM 050 1/2 1,50 3/4 1,00. Δp bar 0,50 0,00 FHA 051 1,50 1,00 FMM 00 Maximum pressure 0 bar Flow rate to l/min FHA 0 Maximum pressure 60 bar Flow rate to 0 l/min Technical data FMM 00 Filter housing (Materials) Head: Cast iron (chemical heat treatment) Housing: Steel

More information

Flow rates to 485 l/min

Flow rates to 485 l/min FB Maximum pressure 0 bar Flow rates to 8 l/min Technical data Filter housing (Materials) ead: Cast iron (chemical heat treatment) ousing: Steel (chemical heat treatment) Bypass valve: Steel Check valve:

More information

Flow rates to 485 l/min

Flow rates to 485 l/min FB Maximum pressure 0 bar Flow rates to 8 l/min Technical data Filter housing (Materials) ead: Cast iron (chemical heat treatment) ousing: Steel (chemical heat treatment) Bypass valve: Steel Check valve:

More information

CHAPTER 6 FRICTION AND WEAR ANALYSIS FOR BUSHING

CHAPTER 6 FRICTION AND WEAR ANALYSIS FOR BUSHING CHAPTER 6 FRICTION AND WEAR ANALYSIS FOR BUSHING 6.1 TEST RIG SETUP FOR THE FRICTION AND WEAR ANALYSIS Knowing the frictional coefficient is important for the determination of wear loss and power loss

More information

Check-Q-meter. Table of contents. Features. Functions. RE 27551/ /10 Replaces: Type FD

Check-Q-meter. Table of contents. Features. Functions. RE 27551/ /10 Replaces: Type FD Check-Q-meter RE /0.0 /0 Replaces: 09.9 Type FD Nominal size... Series ax. Operating pressure 0 bar ax. Flow 0 l/min K9/ Table of contents Contents Page Features Functions Ordering details Symbols Functional

More information

Cartridge Valves Technical Information. Quick reference

Cartridge Valves Technical Information. Quick reference Quick reference Contents CPF0... 8. CP600-5... 8. CP60-5... 8. 066 handle kit... 8.5 MP06... 8.6 MP... 8.6 X05-FD0 Traction manifold... 8.9 X05-FD6 Traction manifold... 8.0 X05-FD0 Traction manifold...

More information

Instructions for Parts Books

Instructions for Parts Books Instructions for Parts Books The heading at the top of the page will be the same for the picture of the parts at it is for the page with the part numbers. Definition of column headings on part number pages:

More information

Pilot operated 2 port solenoid valve (general purpose valve) Standard specifications NC (normally closed) type C C. 2 /s) Starting

Pilot operated 2 port solenoid valve (general purpose valve) Standard specifications NC (normally closed) type C C. 2 /s) Starting 21/22 Series (general purpose valve) 21/22 Series NC (normally closed) type, NO (normally open) type Port size: Rc1 1/4 to Rc2, 32 to 50 flange iaphragm structure JIS symbol 21: Common specifications Item

More information

How to order. Load voltage 5 V, 12 V 12 V 5 V, 12 V 12 V 5 V, 12 V 12 V

How to order. Load voltage 5 V, 12 V 12 V 5 V, 12 V 12 V 5 V, 12 V 12 V ISO Standards ir Cylinder: Standard Double cting with End of Stroke Cushioning Series CP ø, ø, ø, ø, ø, ø0, ø With au switch 0 CPS 0 J W CPSD With au switch (uilt-in magnet) L F G C Mounting asic xial

More information

JDV CONTROL VALVES CO., LTD. JCT/JCTM Series 3/4 Way Trunnion Type Valve Manual

JDV CONTROL VALVES CO., LTD. JCT/JCTM Series 3/4 Way Trunnion Type Valve Manual JCT/JCTM Series 3/4 Way Trunnion Type Valve Manual 1. Please read this manual before installation or servicing. 2. Before installing or servicing, please ensure the line pressure has been relieved and

More information

Precision Ball Screw/Spline

Precision Ball Screw/Spline 58-2E Models BNS-A, BNS, NS-A and NS Seal Outer ring Shim plate Seal Spline nut Seal Collar Shim plate Seal End cap Ball Outer ring Ball screw nut Outer ring Ball Retainer Retainer Outer ring Point of

More information

Bettis RGS F-Series. Quarter-Turn Spring-Return (SR) and Double-Acting (DA) Pneumatic Actuators. Product Data Sheet RGS Rev.

Bettis RGS F-Series. Quarter-Turn Spring-Return (SR) and Double-Acting (DA) Pneumatic Actuators. Product Data Sheet RGS Rev. Bettis RGS F-Series Quarter-Turn Spring-Return (SR) and Double-Acting (DA) Pneumatic Actuators Output Torques to 500,000 in-lb (56,492 N m) Ductile Iron or Stainless-Steel Construction Temperatures from

More information

5/2-5/3 SPOOL VALVES MULTIFUNCTION air operated or solenoid air operated with subbase ISO 5599/1 sizes 1, 2 and 3

5/2-5/3 SPOOL VALVES MULTIFUNCTION air operated or solenoid air operated with subbase ISO 5599/1 sizes 1, 2 and 3 / - / SPOOL VALVES MULTIFUNCTION air operated or solenoid air operated with subbase ISO 99/ sizes, and Series Fluids air or inert gas, filtered, lubricated or not Operating pressure Pilot pressure Ambient

More information

RYOBI 10 in. TABLE SAW MODEL NUMBER BTS21

RYOBI 10 in. TABLE SAW MODEL NUMBER BTS21 0 1 1 1 1 1 1 1 SEE FIGURE A 1 1 1 1 1 1 1 1 SEE FIGURE C 1 1 1 1 0 1 SEE FIGURE E 1 SEE FIGURE D 1 1 10 1 0 1 1 1 1 1 1 0 1 1 1 1 1 1 1 1 1 1 1 0 1 1 1 1 1 1 1 1 1 0 1 0 1 10 1 0 1 1 0 1 1 SEE FIGURE

More information

P303 Pressure Regulator

P303 Pressure Regulator P0 Pressure Regulator Minimize Sudden Downstream Load Change Wide Pressure Ranges Integral Monitoring The BelGAS P0 and P0H gas pressure reducing regulators are available with a true monitor regulator,

More information

2.3. Rockers. Contents

2.3. Rockers. Contents . SVRSealed Vehicle SVRSealed Vehicle Rocker Contents Description SVRSealed Vehicle Above Panel Rocker Switch............... Below Panel Rocker Switch............... Technical Data and Specifications..........

More information

Flow rates to 750 l/min

Flow rates to 750 l/min FP Maximum pressure 0 bar Flow rates to 70 l/min Technical data Filter housing (Materials) ead: Cast iron (chemical heat treatment) ousing: Steel (chemical heat treatment) Bypass valve: AISI L (FP 0-0)

More information

DYNAMICS OF MACHINES By. Dr.K.SRINIVASAN, Professor, AU-FRG Inst.for CAD/CAM, Anna University BALANCING OF RECIPROCATING MASSES

DYNAMICS OF MACHINES By. Dr.K.SRINIVASAN, Professor, AU-FRG Inst.for CAD/CAM, Anna University BALANCING OF RECIPROCATING MASSES DYNAMICS OF MACHINES By Dr.K.SRINIVASAN, Professor, AU-FRG Inst.for CAD/CAM, Anna University BALANCING OF RECIPROCATING MASSES SINGLE CYLINDER ENGINE IN-LINE ENGINES- 3, 4,5, 6 cylinders are Common V-ENGINES

More information

PRESSURE GAUGE SELECTORS

PRESSURE GAUGE SELECTORS PRESSURE GUGE SELECORS Gauge isolator valves are designed to protect pressure gauges from pressure shocks when the pressure reading is not required; after each reading setting the selector to the closed

More information

Clausing Industrial, Inc. Variable Speed 20" Single and Multi-spindle, Belt Drive Industrial Drill Presses

Clausing Industrial, Inc. Variable Speed 20 Single and Multi-spindle, Belt Drive Industrial Drill Presses www.clausing-industrial.com Variable Speed 20" Single and Multi-spindle, Belt Drive Industrial Drill Presses Clausing Industrial, Inc. Two Speed Variable Speeds 150-2000rpm Variable Speeds 200-1300rpm

More information

ABB SpA COMEM Operating Unit Strada Regionale 11, Signolo Montebello Vicentino (VI) - ITALY

ABB SpA COMEM Operating Unit Strada Regionale 11, Signolo Montebello Vicentino (VI) - ITALY ABB SpA COMEM Operating Unit Strada Regionale 11, Signolo 22 36054 Montebello Vicentino (VI) - ITALY www.abb.com/transformercomponents The information contained in this document is for general information

More information

210H-3 HA 289 HA H-3. f80 f160. f140. f125. f50. Type. Standard type. Adaptable fluid. Seal material. Phosphate ester fluid. Water in oil fluid

210H-3 HA 289 HA H-3. f80 f160. f140. f125. f50. Type. Standard type. Adaptable fluid. Seal material. Phosphate ester fluid. Water in oil fluid 288 28 Type Nominal pressure Maximum allowable pressure roof test pressure Minimum operating pressure orking speed range orking temperature range (ambient/fluid temperature) Structure of cushioning Adaptable

More information

Flow rates to 750 l/min

Flow rates to 750 l/min FP Maximum pressure 0 bar Flow rates to 70 l/min Technical data Filter housing (Materials) ead: Cast iron (chemical heat treatment) ousing: Steel (chemical heat treatment) Bypass valve: AISI L (FP 00-0)

More information

NCK/SCK/FCK Related products Shock absorber NCK/ SCK/FCK

NCK/SCK/FCK Related products Shock absorber  NCK/ SCK/FCK ethod ixed type Adjustable type odel no. N S Low speed type edium speed type High speed type CONTENTS Safety precautions /fixed type (N) 7 /adjustable type (S) 9 /adjustable type () 7 ax. colliding speed

More information

DISCONTINUED PRECISION MEASURING FOWLER CALIPERS 1 - VERNIER CALIPERS 4 - ELECTRONIC CALIPERS

DISCONTINUED PRECISION MEASURING FOWLER CALIPERS 1 - VERNIER CALIPERS 4 - ELECTRONIC CALIPERS FOWLER CALIPERS 1 - VERNIER CALIPERS 4 - ELECTRONIC CALIPERS 52-058-016 Fine quality vernier calipers are constructed of stainless steel. 52-057-004 offers 3-way measurement to accuracy. 52-058-XXX series

More information

Ball screw. Linear. Coupling cover. 1Positioning table of a structure with enhanced sealing property. 3 High corrosion resistance

Ball screw. Linear. Coupling cover. 1Positioning table of a structure with enhanced sealing property. 3 High corrosion resistance Cleanroom Precision Positioning Table TC Ball screw TC EB Slide table inear Way Side cover Stainless sheet Motor bracket inear Coupling cover Pipe threads for suction connector Points ight weight, low

More information

w w w. i n t e l l i g e n t a c t u a t o r. d e

w w w. i n t e l l i g e n t a c t u a t o r. d e GB SCARA ROBOT w w w. i n t e l l i g e n t a c t u a t o r. d e 0.2 400 IX-NNW70(7040) 0.2 400 IX-NNW80(8040) (inverse) T(U)NN TNN UNN IX-T(U)NN301 IX-T(U)NN31 IX-H(I)NN0 (inverse) HNN IX-H(I)NN60 H(I)NN

More information

W 30 Photoelectric proximity switches: Clear signals even with low remission

W 30 Photoelectric proximity switches: Clear signals even with low remission W 0 Photoelectric proximity switches Photoelectric proximity switches, BGS Photoelectric proximity switches, energetic W 0 Photoelectric proximity switches: Clear signals even with low remission In addition,

More information

A 954 C HD. Technical Description Hydraulic Excavator. Machine for Industrial Applications

A 954 C HD. Technical Description Hydraulic Excavator. Machine for Industrial Applications Technical Description Hydraulic Excavator A 95 C HD litronic` Machine for Industrial Applications Operating Weight 165,800 170,0 lb Engine Output 36 hp (0 kw) Technical Data Engine Rating per ISO 99 0

More information

Monoca rrier TM CBLOCK C1-C22 C23-C68 C69-C88

Monoca rrier TM CBLOCK C1-C22 C23-C68 C69-C88 C-1 TM 1. Features C1 2. Classifications and Series C. Optional Components C. Selection of.1. Procedures for Selecting C.2. Rigidity C.. Maximum Speed C.. Accuracy Grade C.. Stroke and Ball Screw Lead

More information

Working pressure. 320 bar. Style T. Style D. Style S. Style B B B D.I. D.I. D.I. D.I.

Working pressure. 320 bar. Style T. Style D. Style S. Style B B B D.I. D.I. D.I. D.I. 8 FB SERIES FB Working pressure 0 bar Style S Style B Style T Style D B B B B D.I. D.I. D.I. D.I. A A A A 8 Technical data Filter body (Materials) ead: Cast iron (chemical heat treatment) ousing: Steel

More information

Universal type Port size: M5, Rc1/8, Rc1/4. Max. working. pressure

Universal type Port size: M5, Rc1/8, Rc1/4. Max. working. pressure irect acting port solenoid valve for compressed air, manifold (special purpose valve) Series Universal type Port size: M, Rc/, Rc/ Refer to nding for more details. JIS symbol ommon supply / common exhaust

More information

Shock Absorber. Absorbing impact and noise. Shock absorber. Series D- -X. Shock absorber: RB series Coolant resistant type: RBL series

Shock Absorber. Absorbing impact and noise. Shock absorber. Series D- -X. Shock absorber: RB series Coolant resistant type: RBL series hock Absorber RB eries Absorbing impact and noise Dampening to meet the high speed requirements of the modern world. hock absorber: RB series oolant resistant type: RBL series hock absorber Automatic adjustment

More information

O-Ring Design Guide REGISTERED QMS. ISD

O-Ring Design Guide REGISTERED QMS. ISD O-Ring Design Guide ISO 9001 REGISTERED QMS ISD Table of Contents O-Ring Design Guide Hi-Tech Seals Inc. Compound Specifications 3 Machining Specifications 4 O-Ring -Section 4 O-Ring Gland Types 4 ID Stretch/OD

More information

Rodless cylinders Series 1600

Rodless cylinders Series 1600 Rodless cylinders Series 00 Basic version 0.Ø.stroke.0.M Max. stroke mt.) AL AI RA RB AF TC AM L LA+stroke AH TD AE TA RV Possibility of a single feed cylinder head AI AP AB AC AD TD TE TB AG RT Left head

More information

Ref. Parts No. Parts Name P A B BS A B BS Remarks Gear Case Assy Gear Case (Inside)

Ref. Parts No. Parts Name P A B BS A B BS Remarks Gear Case Assy Gear Case (Inside) GR 480 / GR 530 Quantity GR480 GR530 Ref. Parts No. Parts Name P A B BS A B BS Remarks 80-1020-100-00 Gear Case Assy 1 1 1 1 1 1 1 80-1020-101-00 Gear Case (Inside) 1 1 1 1 1 1 2 80-1020-103-00 Gear Case

More information

M/60210/M Miniature rotary actuators

M/60210/M Miniature rotary actuators M/6020/M Miniature rotary actuators Double acting - Magnetic piston - Ø 2 and 20 mm Smooth operation with zero backlash Lightweight ompact envelope dimensions Integral magnets for positional feedback TEHNIL

More information

To Design a New Cross Section for Connecting Rod with a Target of 10% Weight Reduction

To Design a New Cross Section for Connecting Rod with a Target of 10% Weight Reduction To Design a New Cross Section for Connecting Rod with a Target of 10% Weight Reduction Priyanka Inderchandji Mutha 1 1Student, Dept. of Mechanical Engineering, Govt. College of Engineering, Aurangabad

More information

LEL LJ1H20 LEM LEY LEJS40 LES LEPY AC

LEL LJ1H20 LEM LEY LEJS40 LES LEPY AC Electric Actuator LEJ Series Slider Type/High Rigidity Low-profile/Low center of gravity Height dimension reduced by approx. 36% (Reduced by 32 mm) 9 58 LJ1H2 4 Type Ball Screw Drive Series Work load:

More information

Cylinder head distortion Limit mm (in) 0.05 (0.002) Cam height STD mm (in) IN

Cylinder head distortion Limit mm (in) 0.05 (0.002) Cam height STD mm (in) IN DF9.9/DF15 POWERHEAD Item SERVICE DATA K5 Recommended operating range r/min 4900 5500 5400 6000 Idle speed r/min 900 ± 50 (in-gear: approx. 870) * Cylinder compression (with decompression system) * Oil

More information

Cambridge International Examinations Cambridge International General Certificate of Secondary Education

Cambridge International Examinations Cambridge International General Certificate of Secondary Education Cambridge International Examinations Cambridge International General Certificate of Secondary Education *0123456789* PHYSICS 0625/04 Paper 4 Theory (Extended) For Examination from 2016 SPECIMEN PAPER 1

More information

MonocarrierTM Monocarrier

MonocarrierTM Monocarrier Monocarrier TM Significantly saves designing load of machinery through an integration of linear motion components in one unit. Demonstrates high performance in a wide range of applications, including assembling

More information

CTV series CHARACTERISTICS LINEAR UNITS

CTV series CHARACTERISTICS LINEAR UNITS CTV series CHARACTERISTICS The CTV series describes s with a precision ball screw drive and two parallel, integrated, Zerobacklash rail guides. Compact dimensions allow high performance features such as,

More information

VOLUMEC. Valve Position Indicator 5

VOLUMEC. Valve Position Indicator 5 VOLUMEC Valve Position Indicator 5 2 KRACHT CORP. 8600 S Wilkinson Way Unit A Perrysburg, OH 43551 USA P +1 419 874 1000 F +1 419 874 1006 flowmeters@krachtcorp.com www.krachtcorp.com VOLUMEC Valve Position

More information

Metal oil filler and air breather filler caps. Bayonet connection. Reservoir holes. TA46 B (Materials)

Metal oil filler and air breather filler caps. Bayonet connection. Reservoir holes. TA46 B (Materials) Metal oil filler and air Series T 46 4 5 6 4 ayonet connection Ø 46 7 8 46 Reservoir holes T46 (Materials) M5 - Cover: Chrome Plated Steel - Filter element: Impregnated paper Polyurethane 64-6 - Flange:

More information

Compact Guide Cylinder with Lock Series MLGP

Compact Guide Cylinder with Lock Series MLGP Compact Guide Cylinder with Lock Series ø,,,, ø,,, ø0 CLG CL CN MLC Drop prevention when the pressure of air source is decreased or the residual pressure is released. Drop prevention for press fitting

More information

XL-580. Liste de pièces Lista de Piezas Parts List Copyright SVP Worldwide - All rights reserved

XL-580. Liste de pièces Lista de Piezas Parts List Copyright SVP Worldwide - All rights reserved 0 Copyright SVP Worldwide - All rights reserved XL-0 Liste de pièces Lista de Piezas Parts List 0-6 0 March 0 A 0 0 6 6 Singer XL-0 Pos Part No Description 0 0 THRUST WASHER 60 MAIN SHAFT WITH BALANCER

More information

WT 27 L-2 Laser Photoelectric proximity switches, background suppression -- DC. Dimensional drawing Adjustments possible WT 27L-2F 430

WT 27 L-2 Laser Photoelectric proximity switches, background suppression -- DC. Dimensional drawing Adjustments possible WT 27L-2F 430 WT L- Laser Photoelectric proximity switches, background suppression -- DC 00...00 mm Photoelectric proximity switches Dimensional drawing.. Laser LED, red light Adjustable background suppression 0 0.

More information

Medium bore size cylinder Double acting/single rod/with switch. SCA2 Series. Bore size: 40, 50, 63, 80, 100 mm. 80 dia. 63 dia. +2.

Medium bore size cylinder Double acting/single rod/with switch. SCA2 Series. Bore size: 40, 50, 63, 80, 100 mm. 80 dia. 63 dia. +2. Meium ore size cyliner oule acting/single ro/with switch eries Bore size:, 5,, 8, 1 mm JI symol C VIBE. pecifications escriptions /2 Bore size mm ia. ia. ctuation Working flui Max. working pressure Ma

More information

Variable Speed 20" Single and Multi-spindle, Belt Drive Industrial Drill Presses

Variable Speed 20 Single and Multi-spindle, Belt Drive Industrial Drill Presses www.clausing-industrial.com Variable Speed 20" Single and Multi-spindle, Belt Drive Industrial Drill Presses Two Speed Variable Speeds 150-2000rpm Variable Speeds 200-1300rpm Variable Speeds 300-2000rpm

More information

Physics 208, Spring 2015 Exam #1

Physics 208, Spring 2015 Exam #1 Physics 208, Spring 2015 Exam #1 A Name (Last, First): ID #: Section #: You have 75 minutes to complete the exam. Formulae are provided on a separate colored sheet. You may NOT use any other formula sheet.

More information

The 505F Series 3/4/5-Way Ball Valve. Standard Features and Benefits. Operating Conditions. Specifications. Options

The 505F Series 3/4/5-Way Ball Valve. Standard Features and Benefits. Operating Conditions. Specifications. Options The 505F Series //5-Way Ball Valve The 505F is a true multi-way ball valve with balanced fourseat construction. This full port valve is available in a variety of flow plans which can replace multiple two-way

More information

Flow rates to 475 l/min

Flow rates to 475 l/min FMP Maximum pressure 0 bar Flow rates to 7 l/min Technical data PRSSUR FILTR Filter housing (Materials) ead: Cast iron (chemical heat treatment) ousing: Steel (chemical heat treatment) Bypass valve: Brass

More information

2017 VCE Systems Engineering examination report

2017 VCE Systems Engineering examination report 2017 VCE Systems Engineering examination report General comments The majority of students made a reasonable attempt at most questions on the 2017 Systems Engineering examination. There were some questions

More information

Design against fluctuating load

Design against fluctuating load Design against fluctuating load In many applications, the force acting on the spring is not constants but varies in magnitude with time. The valve springs of automotive engine subjected to millions of

More information

Normally Closed (N.C.), Normally Open (N.O.), Common (C.O.)

Normally Closed (N.C.), Normally Open (N.O.), Common (C.O.) Series VVX// The models VX// have been revised. For details, please refer to catalog no. ES0-A. Similar updating Normally Closed (N.C.), Normally Open (N.O.), Common (C.O.) Courtesy of Steven Engineering,

More information

PRA/282000/M. Smart cylinders ISO 6431, VDMA and NFE Magnetic piston Double acting Ø 32 to 100 mm

PRA/282000/M. Smart cylinders ISO 6431, VDMA and NFE Magnetic piston Double acting Ø 32 to 100 mm Smart cylinders ISO, VDMA and NFE 9-00- Magnetic piston Double acting Ø to 00 mm Conforms to ISO, VDMA, NFE 9-00- Complete functional unit with integrated AS-Interface bus system or multipole connector

More information

PARTS LIST BRUSHCUTTERS BK3402FL BK4302FL (CHINA)

PARTS LIST BRUSHCUTTERS BK3402FL BK4302FL (CHINA) T1232-93121 (907) PARTS LIST BRUSHCUTTERS BK3402FL BK4302FL (CHINA) : 1. Use ZENOAH genuine parts as specified in the parts list for repair and/or replacement. 2. ZENOAH does not warrant the machines,

More information

Overload Relays. SIRIUS 3RU1 Thermal Overload Relays. 3RU11 for standard applications. 5/46 Siemens LV 1 AO 2011

Overload Relays. SIRIUS 3RU1 Thermal Overload Relays. 3RU11 for standard applications. 5/46 Siemens LV 1 AO 2011 SIRIUS 3RU1 Thermal Overview 1 2 7 3 4 6 "Increased safety" type of EEx e according to ATEX directive 94/9/EC The 3RU11 thermal overload relays are suitable for the overload of explosion-proof motors with

More information

SKF actuators available for quick delivery. Selection guide

SKF actuators available for quick delivery. Selection guide SKF actuators available for quick delivery Selection guide A wide range of SKF actuators available for quick delivery Industrial actuator 24 Volt DC Load range 1 000 to 4 000 N Speed range 5 to 52 mm/s

More information

Table of Contents SC Series Features and Benefits

Table of Contents SC Series Features and Benefits Table of Contents SC Series...................................................... -6 Features and Benefits.................................................................................. How To Order........................................................................................

More information

GRUNDFOS DATA BOOKLET MAGNA, UPE. Series 2000 circulator pumps

GRUNDFOS DATA BOOKLET MAGNA, UPE. Series 2000 circulator pumps GRUNDFOS DATA BOOKLET MAGNA, UPE Series circulator pumps Contents Product data MAGNA and UPE 3 Duty range 3 Characteristic features 3 Benefits 3 Applications 3 eating systems 3 Pumped liquids Type key

More information

Spare parts list GS 660

Spare parts list GS 660 Spare parts list GS 0 Contents Water inlet up to mach. no.: 0 Page Water inlet from mach. no. 0 Page Tank and tank heating Page Water drainage, Mediamat Cyclo Page Wash pump Page Bottom washing system

More information

KF Series. -40 to to 100 VDC 0.47 to F

KF Series. -40 to to 100 VDC 0.47 to F Low Impedance Features Used in communication equipments, switching power supply, industrial measuring instruments, etc. Load life 000~000 Hrs at Safety vent construction design. For detail specifications,

More information

Lab M4: The Torsional Pendulum and Moment of Inertia

Lab M4: The Torsional Pendulum and Moment of Inertia M4.1 Lab M4: The Torsional Pendulum and Moment of Inertia Introduction A torsional pendulum, or torsional oscillator, consists of a disk-like mass suspended from a thin rod or wire. When the mass is twisted

More information

RF (Radio Frequency) C R 20 Type

RF (Radio Frequency) C R 20 Type RF (Radio Frequency) C R Type (by) PhotoMOS RELAYS.±..69±.8.±..7±.8.±..8±.8 mm inch FEATURES. Low output capacitance between output terminals and low ON-resistance capacitance(c):.pf (typ.) ON resistance(r):

More information

barmesapumps.com SELF-PRIMING CENTRIFUGAL TRASH PUMP SPECIFICATIONS Series: SH8-U Suction: 8" Discharge: 8" Spherical solids handling: 3"

barmesapumps.com SELF-PRIMING CENTRIFUGAL TRASH PUMP SPECIFICATIONS Series: SH8-U Suction: 8 Discharge: 8 Spherical solids handling: 3 SELF-PRIMING CENTRIFUGAL TRASH PUMP Series: SH-U Suction: " Discharge: " Spherical solids handling: 3" SIZE BEARING - PUMP END " x " NPT, lbs., female flange. Open single ball, radial load. LIQUID TEMPERATURE

More information

Direct-operated 2/2-way compact solenoid valves Type EV210A

Direct-operated 2/2-way compact solenoid valves Type EV210A Data sheet Direct-operated 2/2-way compact solenoid valves Type EV210A EV210A covers a wide range of small, directoperated 2/2-way solenoid valves for use in industrial machinery. The compact design together

More information

SECONDARY SCHOOLS ANNUAL EXAMINATIONS 2005 Educational Assessment Unit Education Division. FORM 4 PHYSICS Time: 1 hr. 30 min.

SECONDARY SCHOOLS ANNUAL EXAMINATIONS 2005 Educational Assessment Unit Education Division. FORM 4 PHYSICS Time: 1 hr. 30 min. SECONDARY SCHOOLS ANNUAL EXAMINATIONS 2005 Educational Assessment Unit Education Division FORM 4 PHYSICS Time: 1 hr. 30 min. NAME: CLASS Answer all the questions in the spaces provided on the Exam Paper.

More information