HRN/HRN-C Series Hydraulic Vane Rotary Actuators
|
|
- Norma Powers
- 5 years ago
- Views:
Transcription
1 HRN/ Hydraulic Vane Rotary Actuators Vane Actuators Tork-Mor HRN Contents Features... 2 Ordering Information... Engineering Data / Specifications... Dimensions... Features... 1 Ordering Information...12 Engineering Data/Specifications...13 Dimensions... 1 Keys _HRN.pmd, M&A 1
2 Catalog HY3-18/US Features REFERENCE POINT - Starting points given relative to porting flats. SHAFT AND VANE - A one piece shaft, vane and seal with a rounded vane design provides high strength while reducing vane seal bypass. SHAFT - A standard, double ended shaft allows for manual override. Note: the rear shaft is square cut. BODY - A three piece, precision machined body incorporates a rounded vane design, virtually eliminating vane seal bypass. SHAFT BEARINGS - The shaft and vane assembly is supported by two rolling element bearings. SINGLE OR DOUBLE VANE OPTIONS 18_HRN.pmd, M&A 2
3 Catalog HY3-18/US Features The incorporates a rounded vane design, which provides lower vane seal bypass. The shaft and vane are machined from high strength alloy steel as one piece. The vane seal is molded in a pre-machined groove in order to provide a one piece shaft, vane, and seal assembly for long life and reliability. The standard rear output shaft provides for an easily accessible manual override in the event that hydraulic pressure is lost. Available options include rotations of 9 degrees and 27 degrees depending on whether the unit is arranged as a double vane or single vane configuration. Reference points (or keyway timing) are provided relative to the port positioning. Large, convenient, front flange with precision pilot diameter allows for concise mounting and easy integration with the customer s application. Specifications Rated Operating Pressure: 7 MPa (1 psi) Minimum Operating Pressure: 1 MPa (1 psi) Output 7 MPa: 1 to 19 N m (89 to 173 in-lb) Standard Rotations: 9 to 27 Operating Temperature Range: C to C (32 F to 1 F) Filtration Requirement: Mounting Orientation: Quick Reference Data Standard Timing: ISO Class 17/1 Cleanliness Level Unrestricted See Figures for Start Position Theoretical Output Torque Maximum Model Number 1.7 MPa 3. MPa. MPa 7. MPa Breakaway Unit (2 psi) ( psi) (7 psi) (1 psi) Pressure Weight N m (in-lb) N m (in-lb) N m (in-lb) N m (in-lb) MPa (psi) kg (lb) HRN1S 2 (17.7) (3.) 8 (7.8) 1 (89.) 1. (1) 1. (2.21) HRN1S 3 (2.) 8 (7.8) 12 (1.) 2 (177.) 1. (1) 2. (.1) HRN2S 9 (79.7) 13 (11.) 19 (18.) 3 (2.) 1. (1) 3. (.2) Single Vane HRN3S 12 (1.2) 21 (18.) (398.) (31.) 1. (1).3 (9.8) HRN1S 2 (177.) (87.) 9 (8.) 123 (189.) 1. (1) 1.2 (22.9) HRN2S (3.) 133 (1177.) 21 (189.) 31 (2779.) 1. (1) 2. (.1) HRNS 1 (88.) 2 (177.) 2 (3717.) 39 (77.) 1. (1) 32. (7.) HRN7S 17 (1.) 211 (187.) 397 (313.) 98 (873.) 1. (1) 1. (9.1) HRN1D 3 (2.) 8 (7.8) 12 (1.2) 2 (177.) 1. (1) 1. (2.21) HRN1D (3.1) 18 (12.) 27 (239.) (3.) 1. (1) 2. (.1) HRN2D 12 (1.2) 21 (18.) (398.) (31.) 1. (1) 3. (.2) Double Vane HRN3D 21 (18.9) 9 (3.) 78 (9.) 117 (13.) 1. (1). (9.92) HRN1D 3 (2.) 1 (929.) 1 (11.) 2 (218.) 1. (1) 1. (22.93) HRN2D 71 (28.) 2 (2213.) (38.) 27 (9.) 1. (1) 2. (.2) HRND 22 (197.) (389.) 7 (72.) 178 (9.) 1. (1) 33. (72.77) HRN7D 32 (2832.) 73 (1.) 1132 (118.) 19 (173.) 1. (1) 3. (9.82) Vane Actuators Tork-Mor HRN 18_HRN.pmd, M&A 3
4 Catalog HY3-18/US Ordering Information Model Code and Ordering Information Example: HRN1S HRN 1 S Series Hydraulic Vane Rotary Actuator Model HRN1S, HRN1S, HRN2S, HRN3S, HRN1S, HRN2S, HRNS, HRN7S Vanes S - Single Vane D - Double Vane Starting Point 1. A B Shoe (Inside Stopper) Vaneshaft Angle 27 Note: 1. Figures show stroke end position with B port pressurized. 2. It is a view from shaft-with-key side. HRN1D, HRN1D, HRN2D, HRN3D, HRN1D, HRN2D, HRND, HRN7D Starting Point Angle 9 1. A Vaneshaft B Shoe (Inside Stopper) Two s are provided for HRN-3D, 1D and 2D types only 18_HRN.pmd, M&A
5 Catalog HY3-18/US Engineering Data / Specifications Model No. Unit Size HRN1S HRN1S HRN2S HRN3S HRN1S HRN2S HRNS HRN7S Vane Single Vane Rotation Degree 27 Rotational Tolerance Degree +3 - Reference Point Degree Size Rc 1/8 Rc 1/ Rc 3/8 Rc 1/2 Minimum Operating MPa 1. Pressure Range psi 1. Maximum Operating MPa 7. Pressure Range psi 11. Fluid Temperature Range C to F 32 to 1 Displacement cm Internal Bypass Leakage at C cm 3 /min Model No. Unit Size HRN1D HRN1D HRN2D HRN3D HRN1D HRN2D HRND HRN7D Vane Double Vane Rotation Degree 9 Rotational Tolerance Degree +3 - Reference Point Degree Size Rc 1/8 Rc 1/ Rc 3/8 Rc 1/2 Minimum Operating MPa 1. Pressure Range psi 1. Maximum Operating MPa 7. Pressure Range psi 11. Fluid Temperature Range C to F 32 to 1 Displacement cm Internal Bypass Leakage at C cm 3 /min Vane Actuators Tork-Mor HRN Kinetic Energy Ratings and Bearing Load Capacities Bearing Load Capacities Maximum Inertia Model Thrust Load Radial Load Energy Rating Number N lb N lb J in-lb HRN HRN HRN HRN HRN HRN HRN HRN Note: The allowable inertia energy is applicable when the load is installed on the keyed input shaft. Caution: Operation of actuator at conditions of excessive inertia energy may damage the actuator. See Engineering Guidelines section for selection criteria. 18_HRN.pmd, M&A
6 Catalog HY3-18/US Dimensions HRN1S/D 18 (.71) 8 (2.28) 9 (1.93) - ø. 2-Rc 1/8. W3 X D ø38 h8 (1.) ø1 h7 (.39) (1.2) 8.1(.31) ø38 h8 (1.) ø8 (2.28) 32 (1.2) 38 (1.) ø8 (1.89) 8 (2.28) 9 (1.93) 1 (.9) (.1) 2 (.98) (.2) 2 (2.) 9 (3.7) (.1) 18 (.71) 8 (.31) 8-M D1 M D8 Angle 27 (S-Type) Angle 9 (D-Type) HRN1S/D 2 (.79) 22 3' ø8 (3.1) - ø. 2-Rc 1/ W.3X D2. (1.) -M D8 ø (2.17) Angle 27 ø92 (3.2) Angle 9 ø h8 (1.77) 18 (.71) (D-Type) (S-Type) ø12 h7 (.7) (.1) 3 (1.18) 8 (.31) 7 (2.99) 12 (.88) (.1) 1.1 (.39) 33 ø h8 (1.3) (1.77) ø (2.) 8 (.31) 18 (.71) 22 3' M D8 2 (1.) -M D8 ø (2.17) Dimensions are in mm (Inches) 18_HRN.pmd, M&A
7 Catalog HY3-18/US Dimensions HRN2S/D 2 (.79) 22 3' ø9 (3.) - ø. -M D1 M D8 HRN3S/D Angle 27 (S-Type) ø3 (2.8) W X D3 ø18 (.2).3 ø8 h8 (1.89) +.1 ø1 h7 (.9) 2 (.98) (.1) (1.7) Angle 9 37 (1.) 9 (1.93) 1 (.39) 8 (3.31) 1 (.7) (D-Type) 2-Rc 1/8 (.1) 12.1 (.7) 3 ø8 h8 (1.2) (1.89) ø72 (2.83) 1 (.39) 2 (.79) 22 3' M D8 (1.97) -M D1 ø3 (2.8) Vane Actuators Tork-Mor HRN 21 (.83) -M 3 3 M D1 1 ø1 (3.9) - ø7 W X D3.3 ø12 (.72) ø8 h8 (2.28) +.1 ø2 h7 (.79) 39 (1.) (.2) (1.97) 2 (1.) (2.2) 1 (.39) Angle 27 (S-Type) Angle 9 (D-Type) 9 (3.7) 17 (.89) (.2) 2-Rc 1/8 1.1 (.9) (1.7) ø8 h8 (2.28) ø8 (3.1) 2 (.79) 3 (1.18) M D1 (2.3) 8-M D1 22 3' 22 3' ø9 (2.72) Note: For Double Vane, 2 s are Provided Dimensions are in mm (Inches) 18_HRN.pmd, M&A 7
8 Catalog HY3-18/US Dimensions HRN1S/D 3 (1.18) 2-Rc 1/ ø9 (3.) 3 3 -M1 D ø11 W7 X D ø7 h8 (2.9).3 ø3 h7 (1.18) (2.1) 71 (2.8) 23.2 (.91) ø7 h8 (2.9) ø122 (.8) 1 (2.) 7 (2.7) 1 ø1 (.71) M D12 Angle 27 ø17 (.9) Angle 9 (D-Type) (S-Type) 9 (1.93) (.2). (2.8) 13 (.1) 117 (.1) 228 (8.98) (.2). (1.79) 2 (1.2) ø9 (3.) -M1 D18 M D12 Note: For Double Vane, 2 s are Provided HRN2S/D ø11 (.33) 3 3 ø18 (7.28) M8 D1 1 - ø11 Angle 27 W1 ø21 (8.27).3 ø9 h8 (3.) Angle 9 (D-Type) (S-Type) X D ø h7 (1.7) (1.7) +.2 (2.) (.2) 8. (3.17) 9. (2.3) 82. (3.2) 1 (.9) 13 (.28) 27 (1.83) (.2) 2-Rc 3/8. (2.38) 32.2 (1.2) ø9 h8 (3.) 3 (1.38) Note: For Double Vane, 2 s are Provided ø1 (.3) 8 (3.1) ø11 (.33) 8 (3.1) 1 M8 D1 18_HRN.pmd, M&A Dimensions are in mm (Inches) 8
9 Catalog HY3-18/US Dimensions HRNS/D (1.7) 2-Rc 3/8 ø12 (.72) 3 3 ø2 (8.11) M8 D1 HRN7S/D 1 - ø1 Angle 27 Angle 9 (D-Type) W1 X D. ø23 (9.) ø12 h8 (.2) (S-Type) ø h7 (1.77) 7 (2.7) (.2) 92 (3.2) 71 (2.8) 9 (3.78) 1 (.3) 1 (.3) 29 (11.7) (.2) (1.38) 83. (3.29) ø12 h8 (.2) ø177 (.97) 2 (.98) 2 (1.) ø12 (.72) 1 M8 D1 Vane Actuators Tork-Mor HRN (2.3) 2-Rc 1/2 7 (2.7) ø13 (.12) 3 3 ø21 (8.) M1 D2 - ø1 W1 X D. Angle 27 ø11 h8 (.33) ø2 (9.) Angle 9 (D-Type) ø h7 (1.97) 8 (3.1) (.2) 9 (3.7) 13 (.) 13 (.3) (S-Type) 2 (.79) 2 (8.11) 3 (13.78) (.2).2 (1.7) 82 ø11 h8 (3.23) (.33) ø182 (7.17) 3 (1.18) 9 (1.93) ø13 (.12) M1 D2 18_HRN.pmd, M&A Dimensions are in mm (Inches) 9
10 Catalog HY3-18/US Features REFERENCE POINT - Starting points given relative to porting flats. SHAFT AND VANE - A one piece shaft, vane and seal with a rounded vane design provides high strength while reducing vane seal bypass. SHAFT - A standard, double ended shaft allows for manual override. Note: the rear shaft is square cut. BODY - A three piece, precision machined body incorporates a rounded vane design, virtually eliminating vane seal bypass. CUSHION ADJUSTING VALVE - Field adjustment tunes actuator to absorb inertia loads. SHAFT BEARINGS - The shaft and vane assembly is supported by two rolling element bearings. SINGLE VANE ONLY 18_HRN.pmd, M&A 1
11 Catalog HY3-18/US Features The provides an additional range of vane actuator technology. Unique cushion options are available for applications where control of high inertia loads is critical. The actuator incorporates load deceleration cushions which act over the last 2 to 2 degrees of rotation. These are field adjustable and can be selected to meet varying rotational speeds and loading. The also incorporates a rounded vane design, which provides lower vane seal bypass. The shaft and vane are machined from high strength alloy steel as one piece. The vane seal is molded in a pre-machined groove in order to provide a one piece shaft, vane, and seal assembly for long life and reliability. The standard rear output shaft provides for an easily accessible manual override in the event that hydraulic pressure is lost. Available options include rotations of 9 degrees and 18 degrees with the unit configured as a single vane arrangement. Reference points (or keyway timing) are provided relative to the port positioning. Large, convenient, front flange with precision pilot diameter allows for concise mounting and easy integration with the customer s application. Specifications Rated Operating Pressure: 7 MPa (1 psi) Minimum Operating Pressure: 1 MPa (1 psi) Output 7 MPa: 1 to 19 N m (89 to 173 in-lb) Standard Rotations: 9 to 27 Operating Temperature Range: C to C (32 F to 1 F) Filtration Requirement: ISO Class 17/1 Cleanliness Level Mounting Orientation: Unrestricted Standard Timing: See Figures for Start Position Vane Actuators Tork-Mor HRN-C Quick Reference Data Theoretical Output Torque Maximum Model Number 1.7 MPa 3. MPa. MPa 7. MPa Breakaway Unit (2 psi) ( psi) (7 psi) (1 psi) Pressure Weight N m (in-lb) N m (in-lb) N m (in-lb) N m (in-lb) MPa (psi) kg (lb) HRN1S-C 2 (17.7) (.3) 7 (2.) 1 (88.) 1. (1) 1.2 (2.) HRN1S-C 3 (2.) 8 (7.8) 13 (11.1) 2 (177.) 1. (1) 2. (.29) HRN2S-C 8 (7.8) 13 (11.1) 23 (23.) 29 (2.7) 1. (1) 3.3 (7.28) Single Vane HRN3S-C 1 (88.) 2 (23.1) 38 (33.3) 8 (13.3) 1. (1).7 (1.3) HRN1S-C 23 (23.) (9.) 92 (81.2) 123 (188.) 1. (1) 13. (29.77) HRN2S-C (398.3) 12 (197.) 212 (187.2) 31 (2778.9) 1. (1) 2.7 (.7) HRNS-C 17 (1.) 2 (2212.) 398 (322.3) 39 (77.2) 1. (1) 3. (7.97) HRN7S-C 21 (1778.9) 1 (328.) 79 (12.2) 178 (9.3) 1. (1). (97.2) 18_HRN.pmd, M&A 11
12 Catalog HY3-18/US Ordering Information Model Code and Ordering Information Example: HRN1S-C9 HRN 1 S C 9 Series Hydraulic Vane Rotary Actuator Model Cushion C - Cushion Vanes S - Single Vane Rotation HRN1S-C9, HRN1S-C9, HRN2S-C9, HRN3S-C9, HRN1S-C9, HRN2S-C9, HRNS-C9, HRN7S-C9 A A Angle 9 Shoe (Inside Stopper) A B Vaneshaft Note: 1. Figures show stroke end position with B port pressurized. 2. It is a view from shaft-with-key side. HRN1S-C18, HRN1S-C18, HRN2S-C18, HRN3S-C18, HRN1S-C18, HRN2S-C18, HRNS-C18, HRN7S-C18 B A Angle 18 Shoe (Inside Stopper) B Vaneshaft Ø Ø : Cushion Angle 18_HRN.pmd, M&A 12
13 Catalog HY3-18/US Engineering Data / Specifications Model No. Unit Size HRN1S-C HRN1S-C HRN2S-C HRN3S-C Vane Single Vane Rotation Degree Rotational Tolerance Degree +3 - Reference Point Degree 9 Size Rc 1/8 Operating Pressure Range MPa 1. to 7. psi 1. to 11. Temperature Range C to F 32 to 1 Displacement cm in Internal Bypass Leakage at C cm 3 /min Maximum Moment of Inertia in-lb Maximum Inrush Radian/s 1.72 Angular Velocity Degree/s Cushion Angle Radian Degree 2 2 Oscillating Angle Radian Before Cushioning Degree Model No. Unit Size HRN1S-C HRN2S-C HRNS-C HRN7S-C Vane Single Vane Rotation Degree Rotational Tolerance Degree +3 - Reference Point Degree 9 Size Rc 1/ Rc 3/8 Rc 1/2 Operating Pressure Range MPa 1. to 7. psi 1. to 11. Temperature Range C to F 32 to 1 Displacement cm in Internal Bypass Leakage at C cm 3 /min Maximum Moment of Inertia in-lb Maximum Inrush Radian/s Angular Velocity Degree/s 3 2 Cushion Angle Radian.33 Degree 2 Oscillating Angle Radian Before Cushioning Degree Kinetic Energy Ratings and Bearing Load Capacities Model Bearing Load Capacities Maximum Inertia Number Thrust Load Radial Load Energy Rating N lb N lb J in-lb HRN1S-C HRN1S-C HRN2S-C HRN3S-C HRN1S-C HRN2S-C HRNS-C HRN7S-C Note: The allowable inertia energy is applicable when the load is installed on the keyed input shaft. Maximum Absorbed Energy Model Maximum Absorbed Energy J (in-lb) Number Operating Pressure MPa (psi) 1.9 (28) 2.9 (2) 3.92 (9).9 (71).88 (83).8 (99) HRN1S-C 2. (18.23) 1.7 (1.8) 1.7 (13.1) 1.18 (1.).88 (7.79).9 (.22) HRN1S-C.8 (2.8).12 (3.) 3.3 (3.3) 2.7 (2.2) 2. (18.23) 1.37 (12.12) HRN2S-C 7. (.82).7 (7.2).39 (7.7).31 (38.1) 3.23 (28.9) 2.1 (19.12) HRN3S-C 1.9 (133.) 12.9 (11.2) 1.78 (9.) 8.2 (7.29).7 (7.2).31 (38.1) HRN1S-C 3.87 (273.2) 2. (23.17) 22. (19.1) 17. (1.11) (117.9) 8.2 (7.29) HRN2S-C (98.18) 7.2 (98.).3 (98.7).8 (398.9) (299.22) 22. (199.8) HRNS-C (121.22) 117. (1.7) 98. (87.3) 78. (93.8) 8.8 (2.38) 39.2 (3.92) HRN7S-C 2.39 (221.9) 21.2 ( ) (182.82) 13.8 (12.2) (99.9) 71. (33.13) 18_HRN.pmd, M&A Vane Actuators Tork-Mor HRN-C 13
14 Catalog HY3-18/US Dimensions HRN1S-C 8 (2.28) 9 (1.93) - ø. 9. W3 X D ø38 h8 (1.) +.1 ø1 h7 (.39) 1 (.9) Cushion Valve 3. (2.11) 3 (1.9) 2-Rc 1/8 8.1 (.31) ø38 h8 (1.) 1 (.39) 21 (.83) ø8 (1.89) 29 (1.1) 1 (.39) 8 (2.28) 9 (1.93) Angle 9 Angle 18 (.1) 2 (.98) (.2) (2.3) 13 (.) (.1) 8 (.31) 18 (.71) 8-M D1 M D8 HRN1S-C ø8 (3.1) ø (2.17) 22 3' - ø. -M D8 9 Starting Point Angle 9 Angle 18 W X D2. ø92 (3.2).3 ø h8 (1.77) 18 (.71) +.1 ø12 h7 (.7) (.1) 3 (1.18) 2-Rc 1/8 8. (2.7) 7 (2.2) 8 (.31) 9 (3.) 138 (.3) (.1) Cushion Valve 1.1 (.39) ø (2.) ø h8 (1.77) 22 3' 8 (.31) 18 (.71) M D8 -M D8 2 (.98) 29 (1.1) ø (2.17) Dimensions are in mm (Inches) 18_HRN.pmd, M&A 1
15 Catalog HY3-18/US Dimensions HRN2S-C 22 3' - ø. ø3 (2.8) -M D1 9 W X D3.3 ø8 h8 (1.89) +.1 ø1 h7 (.9) 7 (2.91) (2.2) 2 (1.) 2-Rc 1/8 Cushion Valve 12.1 (.7) ø8 h8 (1.89) ø72 (2.83) 22 3' 27 (1.) 2 (.79) 31 (1.22) ø9 (3.) M D8 HRN3S-C ø18 (.2) Angle 9 Angle 18 2 (.98) (.1) (1.7) 1 (.39) 93 (3.) 13 (.2) (.1) 1 (.39) 2 (.79) M D8 -M D1 ø3 (2.8) Vane Actuators Tork-Mor HRN-C -M ø1 (3.9) 1 - ø7 9 W X D ø8 h8 (2.28) 83 (3.27) 73 (2.87) 7. (1.87) 2-Rc 1/8 Cushion Valve 1.1 (.9) 22 3' 33 (1.3) 21 (.83) 3 ø2 h7 (.79) ø8 h8 (2.28) 3 ø8 (3.1) M D1 ø12 (.72) Angle 9 Angle (1.) (.2) (1.97) 1 (.39) 1 (.13) 17 (.89) (.2) 13 (.1) 2 (.79) 22 3' M D1 8-M D1 3 (1.38) ø9 (2.72) Dimensions are in mm (Inches) 18_HRN.pmd, M&A 1
16 Catalog HY3-18/US Dimensions HRN1S-C 3 - ø11 ø9 (3.) -M1 D18 9 W7 X D ø7 h8 (2.9) ø3 h7 (1.18) 1 (.17) 9 (3.) 8. (2.3) 2-Rc 1/ Cushion Valve 23.2 (.91) ø122 3 (.8) 3 8 (1.89) 3 (2.17) 3 ø7 h8 (2.9) 3 ø1 (.71) M D12 ø17 (.9) Angle 9 Angle 18 9 (1.93) (.2). (2.8) 13 (.1) 131 (.1) 228 (8.98) (.2) 2 (.79) 31. (1.2) M D12 -M1 D18 ø9 (3.) HRN2S-C ø11 (.33) 3 - ø11 9 W1.3 X D +.2 ø9 h8 (3.) ø h7 (1.7) 121. (.78) 1. (.19) 7 (2.) 2-Rc 3/8 Cushion Valve 32.2 (1.2) ø1 (.3) (2.) 3 9 (2.72) 3 ø9 h8 (3.) 3 ø18 (7.28) M8 D1 ø21 (8.27) Angle 9 Angle 18 (2.) (.2) 8. (3.17) 1 (.9) 1 (.91) 27 (1.83) (.2) 3 (1.38). (1.7) M8 D1 ø11 (.33) Dimensions are in mm (Inches) 18_HRN.pmd, M&A 1
17 Catalog HY3-18/US Dimensions HRNS-C ø12 (.72) ø1 9 W1 X D..3 ø12 h8 (.2) ø h7 (1.77) (.79) 127 (.) 8 (3.1) 2-Rc 3/8 Cushion Valve 3.2 (1.38) ø177 (.97) ø12 h8 (.2) (2.7) 3 7 (2.9) ø2 (8.11) M8 D1 HRN7S-C ø23 (9.) Angle 9 Angle 18 7 (2.7) (.2) 92 (3.2) 1 (.3) 181 (7.13) 31 (12.) (.2) 2 (.98) 2 (1.) M8 D1 ø12 (.72) Vane Actuators Tork-Mor HRN-C ø13 (.12) 3 - ø1 9 W1 X D ø11 h8 (.33) ø h7 (1.97) 193 (7.) 17 (.93) 13 (.) 2-Rc 1/2 Cushion Valve.2 (1.7) ø182 3 (7.17) 3 7 (2.91) 3 77 (3.3) 3 ø11 h8 (.33) 3 ø21 (8.) M1 D2 ø2 (9.) Angle 9 Angle 18 8 (3.1) (.2) 9 (3.7) 2 (.79) 227 (8.9) 371 (1.1) (.2) 3 (1.18) 9 (1.93) M1 D2 ø13 (.12) Dimensions are in mm (Inches) 18_HRN.pmd, M&A 17
18 Catalog HY3-18/US Dimensions Keys for Actuators Actuators with keyways are accompanied by the following keys, respectively. Model No. Key Size Quantity Standard With Cushion HRN1 3 x 3 x HRN1 x x HRN2 x x HRN3 x x 39 Single Bane: 1 Double Bane: 2 1 HRN1 7 x 7 x 9 Single Bane: 1 Double Bane: 2 1 HRN2 1 x 8 x Single Bane: 1 Double Bane: 2 1 HRN 1 x 9 x HRN7 1 x 9 x Dimensions are in mm JIS B 131 Parallel key B x H x L, one end rounded SC L R -C 1. B H Key Size B H L C R x 3 x x x x x x x x 7 x x 8 x x 9 x x 9 x _HRN.pmd, M&A 18
Vane Type Rotary Actuators Series Variations
Vane Type Rotary Actuators Series Variations Vane Type Exterior CRB Series 0,, 0,, CRBU Series 0,, 0,, CRB Series, 6, 80, Has a compact body with exterior dimensions that do not change regardless of the
More informationFeatures and Benefits
...................................................................................- Features and Benefits.............................................................................. How to Order....................................................................................
More informationIMAGINE A WORLD WHERE YOUR CRITICAL SERVICE ACTUATION PROBLEMS ARE SOLVED
ROTARY ACTUATORS IMAGINE A WORLD WHERE YOUR CRITICAL SERVICE ACTUATION PROBLEMS ARE SOLVED A SERIES SINGLE RACK, FULL FEATURE PNEUMATIC ROTARY ACTUATORS A SERIES OHIO OSCILLATOR HIGH TORQUE, PNEUMATIC
More informationM/60210/M Miniature rotary actuators
M/6020/M Miniature rotary actuators Double acting - Magnetic piston - Ø 2 and 20 mm Smooth operation with zero backlash Lightweight ompact envelope dimensions Integral magnets for positional feedback TEHNIL
More informationCKA Series. 3-way jaw thin chuck double acting/single acting. Operational stroke length: 5, 6, 7, 9, 20, 25, 30, 38mm.
G G B A S F J L L H LB N/ S/F Specifications Descriptions Size Cylinder bore size Operating method Working fluid Max. working pressure Min. working pressure Ambient temperature Port size Operational stroke
More informationPneumatic Valves. Valve Actuators
Air Preparation Units Symbol Description Pneumatic Valves Symbol Description Symbol Cylinders Description Filter / Separator with manual drain 3-Position, 4-Way, APB ports closed, center pos. Standard
More informationCam Roller Guides. The Drive and Control Company. Service Automation. Electric Drives and Controls. Linear Motion and Assembly Technologies
Industrial Hydraulics Electric Drives and Controls Linear Motion and Assembly Technologies Pneumatics Service Automation Mobile Hydraulics Cam Roller Guides The Drive and Control Company Linear Motion
More informationCheck-Q-meter. Table of contents. Features. Functions. RE 27551/ /10 Replaces: Type FD
Check-Q-meter RE /0.0 /0 Replaces: 09.9 Type FD Nominal size... Series ax. Operating pressure 0 bar ax. Flow 0 l/min K9/ Table of contents Contents Page Features Functions Ordering details Symbols Functional
More informationVariable Displacement Plug-In Motor A6VE. Series 6, for open and closed circuits Axial tapered piston, bent axis design
rueninghaus Hydromatik Series 6, for open and closed circuits xial tapered piston, bent axis design Size 28...20 Nom. pressure up to 400 bar Peak pressure up to 40 bar RE 9606/0.97 RE 9606/0.97 replaces
More informationM O D U L E - 3A Model A10V0 Piston Pump Manual A10V0 PUMP. Features
T E C H N I C A L I N F O R M A T I O N M A N U A L F O R T H E A 1 0 V 0 V A R I A B L E D I S P L A C E M E N T P U M P S A10V0 PUMP Features High Efficiency through load sensing (= fuel savings) Maximum
More informationSeries MHY2/MHW Angular Gripper. Cam actuation style is now standardized! MHZ2 MHZJ2 MHQ MHL2 MHR MHK MHS MHC2 MHT2 MHY2 MHW2 MRHQ 2.
18 Angular Gripper Cam Style Rack & Pinion Style Series / Cam actuation style is now standardized! 2.8-1 18 Angular Gripper 18 Angular Gripper Series / Cam Style Rack & Pinion Style Series / Series MHY/Cam
More informationFormulae and examples of calculation
Shock absorber Formulae and examples of calculation A shock absorber decelerates linearly. Roughly 90% of shock absorber applications can be modelled if the following 4 factors are known: 1. Mass to slow
More informationROTARY MOTION CONTROL
ROTARY MOTION CONTROL Technical Data Sheet Nexen Mechanical Torque Limiter Family PMT / PMK / PMC 2TC 2CC ECC PCC Mechanical Torque Limiter The trend in industry is to design and incorporate more automation
More informationPrecision Ball Screw/Spline
58-2E Models BNS-A, BNS, NS-A and NS Seal Outer ring Shim plate Seal Spline nut Seal Collar Shim plate Seal End cap Ball Outer ring Ball screw nut Outer ring Ball Retainer Retainer Outer ring Point of
More informationBall screw. Linear. Coupling cover. 1Positioning table of a structure with enhanced sealing property. 3 High corrosion resistance
Cleanroom Precision Positioning Table TC Ball screw TC EB Slide table inear Way Side cover Stainless sheet Motor bracket inear Coupling cover Pipe threads for suction connector Points ight weight, low
More informationCV3000 Series. Characterized Insert Control Valves
CV3000 Series Characterized Insert Control Valves The CV3000 Series is a v-type control valve for precise control allowing high pressure drop capability with straight-through flow and bubble-tight shut
More informationCartridge Valves Technical Information. Quick reference
Quick reference Contents CPF0... 8. CP600-5... 8. CP60-5... 8. 066 handle kit... 8.5 MP06... 8.6 MP... 8.6 X05-FD0 Traction manifold... 8.9 X05-FD6 Traction manifold... 8.0 X05-FD0 Traction manifold...
More informationRotary modules.
Rotary modules www.comoso.com www.comoso.com Rotary modules ROTARY MODULES Series Size Page Rotary modules RM swivel unit 156 RM 08 160 RM 10 162 RM 12 164 RM 15 168 RM 21 172 RM rotor 176 RM 50 180 RM
More informationFront flange FLV. Max. [knm/stroke]
SDN 45 Safety shock absorbers SDN are a low cost alternative to industrial shock absorbers appropriate to customers requirements. Typical applications: cranes, storage and retrieval unit for highbay warehouse,
More informationø6, ø10, ø15, ø20, ø25, ø32, ø40, ø50, ø63 How to Order Switch rail Nil Standard stroke Refer to page 12 for standard stroke.
Magnetically Coupled Rodless Cylinder: Direct Mount ype Series ø, ø, ø, ø, ø, ø, ø, ø0, ø Direct mount type mm mm mm mm mm mm mm 0 0 mm mm 00 MB Piping type Both sides piping type Centralized piping type
More informationSOLUTION (17.3) Known: A simply supported steel shaft is connected to an electric motor with a flexible coupling.
SOLUTION (17.3) Known: A simply supported steel shaft is connected to an electric motor with a flexible coupling. Find: Determine the value of the critical speed of rotation for the shaft. Schematic and
More informationCTV series CHARACTERISTICS LINEAR UNITS
CTV series CHARACTERISTICS The CTV series describes s with a precision ball screw drive and two parallel, integrated, Zerobacklash rail guides. Compact dimensions allow high performance features such as,
More informationAPI 11E - Specification for Pumping Units
API 11E - Specification for Pumping Units 5 Beam Pump Structure Requirements 5.1 General Requirements for beam pump structures are specified in the following sections. Only loads imposed on the structure
More informationDRS 61: Incremental encoders, number of lines and zero pulse width freely programmable DRS 60: Incremental Encoders with Zero-Pulse-Teach
NEW DRS : Incremental encoders, number of lines and zero pulse width freely programmable DRS : s with Zero-Pulse-Teach Further highlights of this generation of encoders: Simple zero-pulse-teach by pressing
More informationFlow rates to 750 l/min
FP Maximum pressure 0 bar Flow rates to 70 l/min Technical data Filter housing (Materials) ead: Cast iron (chemical heat treatment) ousing: Steel (chemical heat treatment) Bypass valve: AISI L (FP 0-0)
More informationFlow rates to 750 l/min
FP Maximum pressure 0 bar Flow rates to 70 l/min Technical data Filter housing (Materials) ead: Cast iron (chemical heat treatment) ousing: Steel (chemical heat treatment) Bypass valve: AISI L (FP 00-0)
More informationGurley Model A58 Absolute Encoder
Gurley Model Absolute Encoder Motion Type: Rotary Usage Grade: Industrial Output: Absolute Resolution: - Bit The model encoder is a single-turn absolute rotary encoder with opto-electronic technology This
More informationCooler-Bypass Thermostat Valve, Size 10
Cooler-Bypass Thermostat Valve, Size Q max = l/min, p max = bar Temperature-controlled, integral relief function Description These direct acting bypass thermostat valves are size, temperature controlled,
More information180 Angular Gripper. Series MHY2/MHW2. Cam actuation style is now standardised! 5-241
18 Angular Gripper Cam tyle Rack & Pinion tyle eries MHY2/MHW2 Cam actuation style is now standardised! -21 18 Angular Gripper Cam tyle Rack & Pinion tyle eries MHY2/MHW2 eries MHY/Cam tyle Light and compact
More informationVane pump theory for mechanical efficiency
1269 Vane pump theory for mechanical efficiency Y Inaguma 1 and A Hibi 2 1 Department of Steering Engineering, Toyoda Machine Works Limited, Okazaki, Japan 2 Department of Mechanical Engineering, Toyohashi
More informationFlow rates to 485 l/min
FB Maximum pressure 0 bar Flow rates to 8 l/min Technical data Filter housing (Materials) ead: Cast iron (chemical heat treatment) ousing: Steel (chemical heat treatment) Bypass valve: Steel Check valve:
More informationIts modular concept allows to build up a ball valve for any degree of automation and any kind of application
Type 2657...59 DN 10 up to 80 mm; Plastic; 2/2 way dvantages/benefits ntegrated pilot valves, position feed-back and limit switches available Customized system solutions with Burkert valves & sensors With
More informationDirect Operated Type Solenoid Operated Proportional Directional Control Valve
Direct Operated Type Solenoid Operated Proportional Directional Control Valve Features These four-way proportional directional control valves enable control of the forward and reverse motion of an actuator.
More informationIdentification system for short product names. Changes/amendments at a glance. 2 Bosch Rexroth AG OBB omega modules R ( )
Omega Modules OBB 2 OBB omega modules R9990079 (206-05) Identification system for short product names Short product name Example: O B B - 085 - N N - System = Omega module Guideway = Ball Rail System Drive
More informationP = Pump shaft input speed, rad/sec ù M = Motor shaft output speed, rad/sec Parameters: D M = Motor displacement, in /radian
SIMULATION OF A HYDROSTATIC TRANSMISSION UNDERGOING CYCLIC INERTIAL TESTING One of the most important implementations of mathematical models is in simulation, because it is relatively inexpensive to determine
More informationChapter 6. Hydraulic cylinders/rams (linear motors), and Lines/fittings. - Transforms the flow of a pressurized fluid into a push or pull of a rod.
Chapter 6. Hydraulic cylinders/rams (linear motors), and Lines/fittings - Transforms the flow of a pressurized fluid into a push or pull of a rod. 6. Single cting Rams Gravity, spring, etc. can force piston
More informationShaft Locking Devices
External Shaft ocking evice Available sizes: Page # S 900 Self-centering Exceptional concentricity Suitable for hollow shafts Axial hub position fixe uring clamping etric 14mm to 240mm arger sizes on request
More informationSTATIC AND DYNAMIC ANALYSIS OF A PUMP IMPELLER WITH A BALANCING DEVICE PART I: STATIC ANALYSIS
Int. J. of Applied Mechanics and Engineering, 04, vol.9, No.3, pp.609-69 DOI: 0.478/ijame-04-004 STATIC AND DYNAMIC ANALYSIS OF A PUMP IMPELLER WITH A BALANCING DEVICE PART I: STATIC ANALYSIS C. KUNDERA
More informationDrive Units with Ball Screw Drives R310EN 3304 ( ) The Drive & Control Company
Drive Units with Ball Screw Drives R310EN 3304 (2007.05) The Drive & Control Company Linear Motion and Assembly Technologies Ball Rail Systems Roller Rail Systems Linear Bushings and Shafts Precision Ball
More informationBacklash-free Torque Limiting Clutches
ES -Compact Backlash-free Torque Limiting Clutches www..de Instant separation on overload Permanent backlash-free torque transmission Readable torque adjustment Synchronous, ratchetting and overload designs
More informationExample of Calculating the Nominal Life
Condition (Horizontal Installation) Assumed model number : KR 5520A LM Guide unit (C = 800N, C 0 = 6900N) Ball Screw unit (C a = 620N, C 0a = 9290N) Bearing unit(fixed Side) (C a = 7600N, P 0a = 990N)
More informationMiniature (SEB Type) Tapped-Hole rail Types: Slide guides with clearance holes are standard and tapped holes are available upon request.
Miniature (SE Type) The SE type slide guide is a linear motion bearing in which the ball elements roll along two tracking grooves. This is the smallest and lightest slide guide series offered by Nippon
More informationAbsolute encoders multiturn
elektronischer electronic multiturn, Multiturn, magnetic magnetisch Sendix M66 / M68 (shaft / hollow shaft) The Sendix M6 with Energy Harvesting Technology is an electronic multiturn encoder in miniature
More informationPlanetary Screw Assemblies PLSA
Planetary Screw Assemblies PLSA Ernst-Sachs-Straße 100 97424 Schweinfurt Tel. +49 9721 937-0 Fax +49 9721 937-275 www.boschrexroth.com Catalog "Planetary Screw Assemblies PLSA" R310XX 3308 (2014.01) Dear
More informationAtlas Copco Air motors. A full range of compact, high performance air motors
Atlas Copco Air motors A full range of compact, high performance air motors ATLAS COPCO AIR MOTORS AIR MOTOR FEATURES AND CHARACTERISTICS Air motors are compact and lightweight. An air motor weighs only
More informationFlow rates to 485 l/min
FB Maximum pressure 0 bar Flow rates to 8 l/min Technical data Filter housing (Materials) ead: Cast iron (chemical heat treatment) ousing: Steel (chemical heat treatment) Bypass valve: Steel Check valve:
More informationFlow rates to 485 l/min
FB Maximum pressure 0 bar Flow rates to 8 l/min Technical data Filter housing (Materials) ead: Cast iron (chemical heat treatment) ousing: Steel (chemical heat treatment) Bypass valve: Steel Check valve:
More informationLinear guide drives. Synchronous shafts The use of synchronous shafts enables several linear axes to be operated with one drive.
Linear guide drives Drive concept The linear guides are driven via the hollow shaft in the drive head. The drive head is used to directly install a motor or alternatively (in connection with a center shaft)
More informationDigital AC Motors MHD
Digital AC Motors MHD090 8-1 8 MHD090 8.1 Technical Data Description Symbol Unit MHD090B-035 Type of cooling Natural Natural Surface Liquid Motor overtemperature 60 K 100 K 60 K/100 K 60 K/100 K Electric
More informationBettis RGS F-Series. Quarter-Turn Spring-Return (SR) and Double-Acting (DA) Pneumatic Actuators. Product Data Sheet RGS Rev.
Bettis RGS F-Series Quarter-Turn Spring-Return (SR) and Double-Acting (DA) Pneumatic Actuators Output Torques to 500,000 in-lb (56,492 N m) Ductile Iron or Stainless-Steel Construction Temperatures from
More informationCONTENTS INDEX P. 2 P. 3-4 PRODUCT FEATURES P. 5-6 PRODUCT STRUCTURE P. 7-8 PRODUCT APPLICATIONS PRODUCT SELECTION P P. 11 MODEL LIST P.
EMER-FLEX COUPLING CONTENTS INDEX PRODUCT FEATURES PRODUCT STRUCTURE PRODUCT APPLICATIONS PRODUCT SELECTION MODEL LIST NEF-HUB NES Series P. 2 P. 3-4 P. 5-6 P. 7-8 P. 9- P. P. 2 P. 3-4 NEF Series Spacer
More informationMaximum pressure 420 bar Flow rate to 152 l/min. 560 bar. 140 l/min. Flow rate l/min FMM 050 1/2 1,50 3/4 1,00. Δp bar 0,50 0,00 FHA 051 1,50 1,00
FMM 00 Maximum pressure 0 bar Flow rate to l/min FHA 0 Maximum pressure 60 bar Flow rate to 0 l/min Technical data FMM 00 Filter housing (Materials) Head: Cast iron (chemical heat treatment) Housing: Steel
More informationSelection Calculations For Linear & Rotary Actuators
H-8 For Electric Linear Slides and Electric Cylinders First determine your series, then select your product. Select the actuator that you will use based on the following flow charts: Selection Procedure
More informationUniversal type Port size AS13 1F-M3. M3 x 0.5 M5 x 0.8 AS23 1F-01 AS23 1F-02 AS33 1F-02 AS33 1F-03 AS43 1F-04 R 1/8 R 1/4 R 1/4 R 3/8 R 1/2
Minimizes installation time and cost Reduces the mounting height and enables compact machinery design. Effective area is larger than the former model. Tube swivels 0 Universal type permits 0 piping swivel.
More informationDynamics of Machinery
Dynamics of Machinery Two Mark Questions & Answers Varun B Page 1 Force Analysis 1. Define inertia force. Inertia force is an imaginary force, which when acts upon a rigid body, brings it to an equilibrium
More informationVOLUMEC. Valve Position Indicator 5
VOLUMEC Valve Position Indicator 5 2 KRACHT CORP. 8600 S Wilkinson Way Unit A Perrysburg, OH 43551 USA P +1 419 874 1000 F +1 419 874 1006 flowmeters@krachtcorp.com www.krachtcorp.com VOLUMEC Valve Position
More information5. What is the moment of inertia about the x - x axis of the rectangular beam shown?
1 of 5 Continuing Education Course #274 What Every Engineer Should Know About Structures Part D - Bending Strength Of Materials NOTE: The following question was revised on 15 August 2018 1. The moment
More information/2 way valves (solenoid actuated diaphragm with forced lifting) 1/4... 2
/ way valves (solenoid actuated diaphragm with forced lifting) /4... Damped operation Operation without differential Suitable for vacuum igh flow rate For systems with low or fluctuating Brass body Wide
More informationR310EN 2403 ( ) The Drive & Control Company
Feed Modules VKK R310EN 2403 (2008.09) The Drive & Control Company Linear Motion and Assembly Technologies Ball Rail Systems Roller Rail Systems Linear Bushings and Shafts Ball Screw Drives Linear Motion
More informationThe basic dynamic load rating C is a statistical number and it is based on 90% of the bearings surviving 50 km of travel carrying the full load.
Technical data Load Rating & Life Under normal conditions, the linear rail system can be damaged by metal fatigue as the result of repeated stress. The repeated stress causes flaking of the raceways and
More informationHEAVY DUTY SWING-OUT VALVE
ISO 900 REGISTERED COMPANY Akron Brass Company. 20 All rights reserved. No portion of this can be reproduced without the express written consent of Akron Brass Company. We will not be responsible for:
More informationSKF actuators available for quick delivery. Selection guide
SKF actuators available for quick delivery Selection guide A wide range of SKF actuators available for quick delivery Industrial actuator 24 Volt DC Load range 1 000 to 4 000 N Speed range 5 to 52 mm/s
More informationEQUATIONS OF MOTION: GENERAL PLANE MOTION (Section 17.5) Today s Objectives: Students will be able to analyze the planar kinetics of a rigid body
EQUATIONS OF MOTION: GENERAL PLANE MOTION (Section 17.5) Today s Objectives: Students will be able to analyze the planar kinetics of a rigid body undergoing general plane motion. APPLICATIONS As the soil
More informationELECTROHYDROSTATIC PUMP UNIT
EECTROHYDROSTATIC PUMP UNIT MODUAR EECTROHYDROSTATIC PUMP UNIT FOR INDUSTRIA APPICATIONS Rev. E, February 8 WHAT MOVES YOUR WORD INTRODUCTION Whenever the highest levels of motion control performance and
More informationAPEX DYNAMICS, INC. Staianless
APEX DYNAMICS, INC. HIGH PRECISION PLANETARY GEARBOXES AE / AER Series Staianless High precision high speed planetary gearboxes AE / AER series Apex Dynamics, Inc. is the world s most productive manufacturer
More informationAC Synchronous Motors
AC Synchronous Motors A C S Y N C H R O N O U S M O T O R S AC Synchronous Motors Kollmorgen AC synchronous motors are high pole count motors that naturally turn at slower speeds (72 or 60 rpm). at 72
More informationConversion Kit for: 7620 and 7820 Swing-Out Valves ft-lbs ft-lbs 8835/ ft-lbs
ISO 900 REGISTERED COMPANY HEAVY DUTY SWING-OUT VALVE 52 53 23 5 2 2 3 28 39 NOT USED WITH SZ HANDLE 2 NOT USED WITH SZ HANDLE 5 2 3 7 9 9 Premier Farnell Corporation. 20 All rights reserved. No portion
More informationUNI EN ISO 9001:2008 UNI EN ISO 14001:2004 BS OHSAS 18001:2007 EC DIRECTIVE 2014/34/EU (ATEX) CERTIFIED MANAGEMENT SYSTEM
EN ISM-BSM CERTIFIED Technology Made in Italy Since 1955 the Varvel Group has been making speed reducers and variators for light industry applications. Reliable partner in power transmission equipment
More information2-way proportional throttle valve for block installation
-way proportional throttle valve for block installation Types FES; FESE Sizes to Component series X Maximum operating pressure bar Maximum flow 800 l/min at Δp = 0 bar Table of contents Contents Page Features
More informationHEAVY DUTY SWING-OUT VALVE
ISO 900 REGISTERED COMPANY HEAVY DUTY SWING-OUT VALVE 52 53 23 5 2 2 3 28 39 NOT USED WITH SZ HANDLE 2 NOT USED WITH SZ HANDLE 5 2 3 7 9 9 Premier Farnell Corporation. 20 All rights reserved. No portion
More informationVACUUM PUMPING METHODS
VACUUM PUMPING METHODS VACUUM PUMPS (METHODS) Positive Displacement Vacuum Gas Transfer Vacuum Kinetic Vacuum Entrapment Vacuum Adsorption Reciprocating Displacement Rotary Drag Fluid Entrainment Ion Transfer
More informationDry System (Twin and DR Type Bearings) Lubricated System (Twin Type Bearings) Lubricated System (DR Type Bearings)
This data sheet interacts with PRT2 Catalogue 54-56 Hepcootion No. 3 Load Life Information The load capacity and life expectancy of Hepcootion ring slides, segments and track systems is determined by many
More informationXR Series. Introduction. Design Features. Availability. Applications
Kaydon Bearings Slewing Ring Bearings Catalog 390 Introduction The consists of Kaydon cross roller bearings. They provide a high degree of stiffness and low rotational torque within a minimal envelope.
More informationBEARINGS Pillow Blocks
The bearing size is usually selected according to the required bearing life and reliability under a specified type of load charged on the bearing. The load applied to the bearing operating under a static
More information/2" Heavy Duty Swing-Out
Premier Farnell Corporation. 0 All rights reserved. No portion of this can be reproduced without the express written consent of Premier Farnell Corporation. ISO 900 REGISTERED COMPANY We will not be responsible
More informationbarmesapumps.com SELF-PRIMING CENTRIFUGAL TRASH PUMP SPECIFICATIONS Series: SH8-U Suction: 8" Discharge: 8" Spherical solids handling: 3"
SELF-PRIMING CENTRIFUGAL TRASH PUMP Series: SH-U Suction: " Discharge: " Spherical solids handling: 3" SIZE BEARING - PUMP END " x " NPT, lbs., female flange. Open single ball, radial load. LIQUID TEMPERATURE
More informationDimensions of propulsion shafts and their permissible torsional vibration stresses
(Feb 2005) (orr.1 Mar 2012) (orr.2 Nov 2012) Dimensions of propulsion shafts and their permissible torsional vibration stresses.1 Scope This UR applies to propulsion shafts such as intermediate and propeller
More informationI-SUP 2008 April Evaluating self-lubricating materials for large scale bearings functioning under seawater conditions
I-SUP 2008 April 23 2008 Evaluating self-lubricating materials for large scale bearings functioning under seawater conditions Van Autrève S., Ost W., Van Wittenberghe J. and De Baets P. 1 Application Civil
More informationS E C T I O N 1 2 P R O D U C T S E L E C T I O N G U I D E - H E L I C A L S C R E W P I L E F O U N D A T I O N S
1. P R O D U C T S E L E C T I O N G U I D E - H E L I C A L S C R E W P I L E F O U N D A T I O N S Helical foundation pile includes a lead and extension(s). The lead section is made of a central steel
More informationSingle Phase Motors Technical Datasheets
Single Phase Motors Technical Datasheets EN A dynamic, strong and ambitious Group: Orange1 Holding is an international renown Group, one of the most important European manufacturers of single-phase and
More informationFlow rates to 475 l/min
FMP Maximum pressure 0 bar Flow rates to 7 l/min Technical data PRSSUR FILTR Filter housing (Materials) ead: Cast iron (chemical heat treatment) ousing: Steel (chemical heat treatment) Bypass valve: Brass
More information35RP2 35RP2 HM 2 HM 3 35RP2. Type. Series Variation. Rack and pinion type Bore (mm) Rotating angle Angle adjustment.
2 3 Type Series Variation Rack and pinion type (mm) 3243 1 ngle adjustment Rated torque 32Nm 4Nm 22Nm (at 3. MPa) 343Nm 4Nm Maximum allowable pressure 3. MPa Proof test pressure MPa Minimum operating pressure.
More informationDesign and Friction Analysis of the Revolving Vane Compressor
Purdue University Purdue e-pubs International Compressor Engineering Conference School of Mechanical Engineering 2006 Design and Friction Analysis of the Revolving Vane Compressor Y. L. Teh Nanyang Technological
More informationPilot operated 2 port solenoid valve (general purpose valve) Standard specifications NC (normally closed) type C C. 2 /s) Starting
21/22 Series (general purpose valve) 21/22 Series NC (normally closed) type, NO (normally open) type Port size: Rc1 1/4 to Rc2, 32 to 50 flange iaphragm structure JIS symbol 21: Common specifications Item
More informationE D D Y C U R R E N T D A M P E R A P P L I C AT I O N D ATA
E D D Y C U R R E N T D A M P E R A P P I C AT I O N D ATA CDA InterCorp CDA InterCorp INTRODUCTION This application manual defines the performance capabilities of CDA InterCorp s Eddy Current Damper Product
More informationProduct description. Compact Modules. Characteristic features. Further highlights
4 Compact Modules Product description Characteristic features Five fine-tuned sizes based on a compact precision aluminum profile with two integrated pre-tensioned ball rail systems Identical external
More informationProduct Description. Further highlights. Outstanding features. 4 Bosch Rexroth Corporation Miniature Linear Modules R310A 2418 (2009.
4 Bosch Rexroth orporation Miniature Linear Modules R310A 2418 (2009.05) Product Description Outstanding features Rexroth Miniature Linear Modules are precise, ready-to-install linear motion systems that
More informationBall Reverser. Ball Reverser Actuator. FLENNOR Power Transmission Products. Patented
Ball Reverser FLENNOR Power Transmission Products Ball Reverser Actuator Patented Ball Reverser Principle General Information NORCO'S Ball Reverser Actuator is a unique actuator which provides automatic
More informationsecond PLSA line R310EN 3308 ( )
01_1 Planetary st Headline_36 Screw Assemblies pt/14.4 mm second PLSA line R310EN 3308 (2011-09) 2 Planetary Screw Assemblies PLSA Planetary Screw Assemblies PLSA Product Overview 3 Nuts, Screws, Screw
More informationLecture 5. Labs this week: Please review ME3281 Systems materials! Viscosity and pressure drop analysis Fluid Bulk modulus Fluid Inertance
Labs this week: Lab 10: Sequencing circuit Lecture 5 Lab 11/12: Asynchronous/Synchronous and Parallel/Tandem Operations Please review ME3281 Systems materials! 132 Viscosity and pressure drop analysis
More informationUniversal bumper to frame hitch for 27,000 33,000 lbs. GVWR trucks. Optional: carbide cutting edge, mushroom shoes, snow deflectors
DATA SPECIFICATION SHEET MEYER RP SERIES (ROAD PRO) Specifications RP-10 10 feet long by 36 inches tall, weight approximately 1600 lbs. Universal bumper to frame hitch for 27,000 33,000 lbs. GVWR trucks
More informationCartridge Valves Technical Information
Quick reference CONTENTS CPF20... 8.2 CP600-5... 8. CP602-5... 8.4 20662 handle kit... 8.5 MP06... 8.6 MP2... 8.6 BC06... 8.9 BC0... 8.0 BC... 8. CP0-... 8. CP904-... 8.4 SC0... 8.5 SC... 8.6 DIN connectors...
More informationThe 505F Series 3/4/5-Way Ball Valve. Standard Features and Benefits. Operating Conditions. Specifications. Options
The 505F Series //5-Way Ball Valve The 505F is a true multi-way ball valve with balanced fourseat construction. This full port valve is available in a variety of flow plans which can replace multiple two-way
More informationLexium integrated drives
Presentation GBX planetary gearbox Presentation In many cases the axis controller requires the use of a planetary gearbox for adjustment of speed of rotation and torque; the accuracy required by the application
More informationHD 049 HD 069 HD 172 HD 319 HD 419 HD 619. Operating pressure up to 8700 psi Nominal flow rate up to gpm us
H i g h P re s s u re i l t e r K i t s H 049 H 069 H 172 H 319 H 419 H 619 Operating pressure up to 8700 psi Nominal flow rate up to 118.9 gpm 40.95-3us e s c r i p t i o n pplication In the high pressure
More informationSTATICS. Friction VECTOR MECHANICS FOR ENGINEERS: Eighth Edition CHAPTER. Ferdinand P. Beer E. Russell Johnston, Jr.
Eighth E 8 Friction CHAPTER VECTOR MECHANICS FOR ENGINEERS: STATICS Ferdinand P. Beer E. Russell Johnston, Jr. Lecture Notes: J. Walt Oler Texas Tech University Contents Introduction Laws of Dry Friction.
More informationPlanetary Screw Assemblies PLSA
Planetary Screw Assemblies PLSA R310EN 3308 (2011-09) The Drive & Control Company C/ Centauro, 13 Área Empresarial Las Cubiertas 28971-Griñón (Madrid) T. 0034 91 126 6627 info@diversiatec.com www.diversiatec.com
More informationSeries 7500 Formed Metal Bellows Catalog 974C
Series 00 Formed Metal Bellows Catalog C Innovators of the industry Bellows assemblies for safety valves, control valves, and regulators. When you look for a formed bellows which is reliable, has a long
More informationPRODUCTION LINES INDIVIDUAL PRODUCTS CUSTOM SOLUTIONS. compliance on products shown is complete or in-progress
PRODUCTION LINES European Product Line INDIVIDUAL PRODUCTS CUSTOM SOLUTIONS compliance on products shown is complete or in-progress INDEX: Air Feeds...2 Servo Feeds...4 Straighteners...6 Stock Reels...7
More informationRodless cylinders Series 1600
Rodless cylinders Series 00 Basic version 0.Ø.stroke.0.M Max. stroke mt.) AL AI RA RB AF TC AM L LA+stroke AH TD AE TA RV Possibility of a single feed cylinder head AI AP AB AC AD TD TE TB AG RT Left head
More information