Amphenol AIB/GT Series MIL-DTL-5015

Transcription

1 OI & IIY mphenol I/ eries I IOV OUI OV I he I/ eries replaces the threaded coupling used in I with a positive, quick-mating, three-point reverse bayonet lock for improved performance. hese mphenol connectors are an ideal cost-effective option for applications requiring reliability in harsh environments, and is the worldstandard for rail, mass transit, and military ground vehicle applications. his series has the same shell dimensions, contact layouts, contacts, and performance characteristics as the I threaded connectors; however, the two series do not intermate. hey are sealed to withstand moisture, condensation, vibration and flash-over. Over 180 contact layouts are available, in variations that allow for just power, just signal, or a mix of both contact types. eets O specification V9534 I/ series connectors are made in accordance with erman military specification V9534 and I Originally designed for O combat vehicles, aircraft, and airborne equipment, these rugged connectors are now in a broad range of demanding commercial applications from trucks to industrial robots O I/ I I IIO Industrial environments requiring extreme environmental reliability and ease of mating and unmating, such as: ower generators attery systems ngines ensors otion control Off-road vehicles arth-moving equipment hips ailroad equipment obile equipment Industrial machinery elecommunications ass transit U I I U-I I/ series connectors use a unique reverse bayonet coupling system that allows for mating and un-mating with a simple 10 rotation without compromising shock, vibration, or moisture resistance. he large, open ramps are easily cleaned of mud or other contaminants. he ramp coupling system eliminates the possibility of cross-threading and thread damage possible with standard I threaded connectors. his design is easier to mate in cold weather, tight spaces, or on equipment which must be disassembled frequently. O VIIO I I/ series connectors are supplied with military-standard resistant sealing and a three-point bayonet coupling nut. he three-point bayonet coupling incorporates a wave spring and washer specified by the rail industry. I/ series connectors pass the most stringent tests of shock and vibration performance while maintaining proper continuity and water tightness. ugged aluminum alloy shell and hardware are light in weight yet highly resistant to damage. or assistance in urope and hina, please see the back cover for a complete listing of our branch offices and contact numbers. pecifications subject to change. 65

2 O I/ I I U UI, VIU, I OIIO O I I/ series connectors provide three independent checks that the connector halves are mated. When the coupling nut is fully rotated, the three studs snap into the end of the ramps with a loud click (audible). he user can feel the bolts click into the grooves (tactile). lue dots on the receptacle and coupling nut are aligned when the connector is properly mated (visual). VIO he sealing is not compromised by any of the operating conditions defined in I and is completely watertight when mated. O U hese connectors will operate in temperatures from -67 to +57 (-55 to +15 ). igh-temperature and zero-halogen insulators are also available. ontact us for ordering information. WI O WI U U-YI IIY Up to 150 amps with accommodations for wire gauges from size 6 to size 0 W. WI VIY O O igh-reliability screw machine contacts with silver or gold plating are available in sizes from 0 to 0 to accommodate wire gauges from 6 to 0 W. older, crimp,, coax, and thermocouple contacts are available. I/ connectors use rail industry-standard crimp contacts that are completely interchangeable with other rail connectors such as itton/veam I series. I IOU WI V9534 OO he standard I layouts and dimensions ensure intermateability and intermount ability with all connectors made in accordance with V9534. ll I/ connectors are intermountable with standard threaded I connectors, often making it possible to upgrade without changing panel cutouts or clearances. I IIIO I & II hell lating ontacts latings Insulator* luminum alloy. (an be grounded) Olive drab chromate coating over cadmium plating, conductive black alloy, non-conductive black alloy, electroless nickel, gray zinc nickel, green zinc, and black anodized opper alloy ard silver plating or gold plating eoprene eals ilicone, eoprene, or Viton ** *Optional zero-halogen and high-temperature insulators are available. ontact us for information. **Viton is a registered trademark of uont OW lastomers 66 or assistance in orth merica: sales@peigenesis.com

3 I IIIO I Operating Voltage/est Voltage according to I he indicated values for the operating voltage are limits concerning the electrical function. When the working voltage exceeds 50V, safety precautions must be in accordance with the following standards: V 0100, I or applicable national standards. urrent ating ltitude Voltage erating* hart VI I OI I I V O IZ 16/16 13 U () 1 3 (60)* 8 46 (69)* 4 80 (10)* (5)* *est amps, multiconductor using adsok contact OI VO* V V OIIO IIU OV VO () VO () U IU 50,000 IIU OV VO () VO () * o attempt has been made to recommend operating voltages. he designer must determine own operating voltage by the application of a safety factor to the above derating chart to compensate for circuit transients, surges, etc. ot corrected for changes in density due to variations in temperature. U IU 70,000 IIU OV VO () VO () I 1/3 1/ ,400 1, /16 1/ ,800, /8 3/16 1, ,600, /16 1/4 1,750 1,50 4,500 3,500 1, /4 5/16,450 1,750 5,700 4,500 1, /16 1 4,00 3,000 8,500 7,000 1, O I/ I I Wire ange izes 6 W to 0 W (ee contact selection on apages 94-97) ontact esistance per I p 3.15 O O I OI VO IZ IIO X. O I IIVO X. 16/ /(0.44)* 1 (0)* 4 0.5/(0.3)* 10 (18)* 0 0./(0.18)* 10 (7)* *Using adsok contact Insulation (5 ) > 5,000 egohms I Operating emperature ealing -67 to +57 (-55 to +15 ) eoprene/ ow moke Zero alogen (lame etardant) -58 to +39 (-50 to +00 ) Viton 33-foot submersible ealed when mated. I 67 and 4 or assistance in urope and hina, please see the back cover for a complete listing of our branch offices and contact numbers. pecifications subject to change. 67

4 O I/ I I I IIIO Wire ealing ange he connector is designed for individual wire sealing. ealing of an outer cable jacket on multiconductor cables must be accomplished with an appropriate endbell. ealing is only guaranteed if wires used are according to I-W-5086 or within the listed ranges. O IZ I I Insulation trip engths ee ontact election hart on apages 94 and 97 ating ife alt pray eat,000 cycles minimum (I/) 500 cycles minimum (I/-) Olive drab chromate over cadmium hours on-conductive black alloy - 48 to 00 hours onductive black alloy - 48 to 00 hours lack anodized hours lectroless nickel - 48 hours ray zinc nickel hours eoprene low-smoke, zero-halogen (Z) 57 (+15 ); Viton 39 (+00 ) hemical esistance iesel uel 48-hour intermittent spray for each -4 chemical with no deterioration, ydraulic luid followed by ontact etention (), asoline Insulation esistance (I), ielectric Withstanding Voltage tests (WV) orrosion esistance Olive rab admium-lated 48 hours per I (3.17/4.6.13) luid Immersion ydraulic luid 0 hours per I (3.19/4.6.15) ubrication Oil 0 hours per I (3.19/4.6.15) Vibration asic hock un fire hock allistic hock ontact ype ontact Insertion ontact etention er I--810, method 516., procedure VIII 1.0 g peak from 5 to 5 z.030 double amplitude from 5 to 57 z 5g peak from 57 to 500 z er I--810, method 516., procedure I pulse at half-sine wave of 30g for 11 seconds er I--810, method 516., procedure IV pulse at half-sine wave of 100g for 1.5 seconds er I--810, method 516., procedure IV pulse at half sine wave of 00g for.5 seconds older, crimp,, coax, or thermocouple. ard silver or gold plating. rom rear with simple hand-tool. emovable, 5 cycles minimum. in and socket contacts are designed to resist severe vibration and repeated connection and disconnection. ontact retention and separation is tested according to I ( ) O IZ IO O I or assistance in orth merica: sales@peigenesis.com

5 I IIIO I/ I O-IO umber of ircuits 1 to 85 olarization ear ccessories pprovals/gency isting YO ey and keyway plus three point bayonet with optional rotational polarization. ee apages aximum orque IZ U ile# I./. X. YO OUI U I I OOU O I OO O O Iron lack I onstantan Yellow O opper lloy u hromel White lumel reen olor code is identified by small dot on wire well end of contact. hermocouple ypes: = Iron-onstantan = lumel-hromel = opper-onstantan = hromel-onstantan I W WV I O I/ I I U (V) O O I O IIVIU WI I O IUO O O O I U (OIO) YO I IUO O I O O-I U I/ I OW O O he next page shows all of the standard possibilities for I/ series connectors. ollow the nine steps to create a description of the connector best suited to your application. his is not an mphenol part number, but gives you a convenient way to select your connector. ontact us with the description for a valid mphenol part number. If you prefer to select the mphenol part number, see the ow-o-order uide on a pages any additional options not shown are available. ontact us if your needs are not met by the options on the next page. or assistance in urope and hina, please see the back cover for a complete listing of our branch offices and contact numbers. pecifications subject to change. 69

6 O I/ I I YOU U UI I I W -47 OO Y Y I* * I is the commercial version of the I. It comes without wear pins in the receptacles and without wave springs in the coupling nuts. ote: I are fully intermateable with all reverse bayonet connectors. U (If omtting endbell, enter -) /OO (If needed) YOU O OIO (omit for normal) 1: OO Y I* O Y : Y, U O ates with I/ OIIIO 6 ox ount 6 tandard lug 6 hielded lug 0 ront Wall ount with ccessory hreads 30 ear Wall ount with ccessory hreads (ost opular) 1 able ount with ccessory hreads 0 ront ox ount with ear ccessory hreads 4 ubber- overed 6 eavy-uty 70 ear ount am ut with ccessory hreads ront ox ount o ccessory hreads 7 ear ount am ut o ccessory hreads hru ulkhead I WI IZ, I OUI I, O OUI I. I / I I I I OW O I VIO OUI OUI I aee pages X VIO 70 or assistance in orth merica: sales@peigenesis.com

7 I: Order connector, backshell and all accessories as one part number! ee V o lamp 3: O OO (I I) eat hrink pin oupling eat hrink eat hrink oot all with cable outisde diameter aee pages U ow-ost hielded ong xtender Unsealed tyle (no grommet seal) (3108) 90º ealed (with grommet seal) 4: O OO (I I) 5: YOU tandard able lamp land eal aee age 11 otting *otting ompound aee age land eal for smaller cable range.aee age 113 6: O O I/ I I aee pages 7-8 = in = ocket =tyle Only 7: OIO 8: O Y aee pages (Omit for normal) W, X, Y, Z = older = ** = rimp* 0 = ess ontacts * When using a in part number, the connector is supplied with the standard size crimp contacts for its layout. olded part numbers on apage indicate crimp contact. lease call for connectors with reduced or enlarged crimp barrel contacts. a** ee page 99 for post diameters and lengths. 9: I O (Omit for silver contacts) 30 = old 30µ old over ickel = hermocouple (older only) = O (ocket only) 1, 8, 4, 0 I (Omit for olive drab chromate over cadmium) 03 = ickel (o with crimp or 116 contacts) 04 = reen Zinc obalt 05 = lack Zinc lloy (o with crimp or 116 contacts) 07 = onductive lack Zinc lloy (o with crimp or 116 contacts) 96 = lack nodized 07 = ray Zinc ickel (o with crimp or 116 contacts) 116 = ess re-tinned older ups 47 = 116 & 05 mod codes (o) 548 = 116 & 03 mod codes (o) 553 = 116 & 07 mod codes (o) 74 = 116 & 07 mod codes (o) I (Omit for standard neoprene) = ow-smoke, zero-halogen V = igh-temperature Viton * *Viton is a registered trademark of uont ow lastomers or assistance in urope and hina, please see the back cover for a complete listing of our branch offices and contact numbers. pecifications subject to change. 71

8 O I/ I I O =16 =1 =8 =4 =0 ating face view of pin inserts YOU Y U O O I Y: I ( =) I (Ì=; v=non Q) 97 (è=97) V9534 ( ) 3450 (q=; s=non Q) hermocouple () 1 O YOU # O O 1-#16 1-#16 1-#16 1-#1 1-#16 1#8 1#16 1-#1 I Ì è q Ì q Ì q Ì è q Ìè Ì q sì Ìs VI I YOU # O O 1-#4 1-#4 1-#8 1-#1 1-#1 1-#0 1-#0 1-#1 I Ìè q Ì q Ì s Ìès è v q Ì q v VI I 17 Vac 1 Vac 4 Vdc 30 Vdc O YOU 10-4* 1-3* * # O O -#16 -#16 -#16 -#16 -#16 -#1 -#1 -#1 -#1 I Ìè q Ìèq è Ìèq Ìè s Ìèq Ìq Ìè VI I hermocouple hermocouple YOU # O O 1-#16; 1-#4 1-#16; 1-#4 -#8 -#8 -#1 -#16 1-#1; 1-#0 I Ìs Ì Ìè èì Ìè Ìès q VI I 3 O YOU # O O -#4 -#4 -#0 3-#16 3-#16 3-#16 3-#16 3-#16 I Ìè v Ìè Ìè q Ì èq Ìèq vès Ìè VI I * most popular ins in receptacle, sockets in plug only for 97/I/ series 7 or assistance in orth merica: sales@peigenesis.com

9 O =16 =1 =8 =4 =0 =/0 ating face view of pin inserts YOU Y U O O YOU # O O 3-#16 -#16; 1-#8 3-#1 1-#16; -#1 3-#16 3-#1 3-#16 3-#8 I Ì è Ì è s Ì è q Ì èq Ì è q Ì è Ì è Ì è q VI I I Y: I ( =) I (Ì=; v=non Q) 97 (è=97) V9534 ( ) 3450 (q=; s=non Q) hermocouple () 3 O (O.) YOU # O O 3-#8 3-#8 for #10 or #1 wire 3-#8 1-#16; -#8 3-#1 -#16;1-#0 3-#8 for #10 or 1 wire 3-#8 I v v Ì è q Ì q Ì è s Ì q v Ì è s VI I 4 O O I/ I I YOU V * # O O 3-#4 3-#4 (coax) -59/U or -6/U 3-#0 3-#/0 4-#16 4-#16 4-#16 I Ì è v v è Ì è q v ès VI I (coax) (); (,) I I I YOU * 18-10* * # O O -#16; -#1 4-#1 4-#16 4-#1 3-#1; 1-#8 4-#1 4-#1 3-#1; 1-#4 -#16; -#8 I Ì è q v Ì è q Ì è q Ì è q Ì è q Ì èq Ì Ì è q VI I hermocouple YOU * * 3-17 # O O 4-#8 -#1; -#8 4-#16 4-#8 3-#16; 1-#0 4-#8 4-#4 I Ì è q Ì ès Ì è q s Ì è q Ì è q VI I * most popular or assistance in urope and hina, please see the back cover for a complete listing of our branch offices and contact numbers. pecifications subject to change. 73

10 O I/ I I O =16 =1 =8 =4 =0 ating face view of pin inserts YOU Y U O O 1 3 I Y: I ( =) I (Ì=; v=non Q) 97 (è=97) V9534 ( ) 3450 (q=; s=non Q) hermocouple () 4 4 O (O.) YOU # O O 4-#4 (coax) -161/U 4-#0 -#4; -#0 4-#0 (coax) -11/U; 4-#0 (coax) -59/U; or -179/U -1/U or -13/U -6/U or -71/U I v Ì è q v v v VI I (coax) (coax) (coax) YOU * 16-8* 18-11* 18-0 # O O 4-#0 4-#0 (coax) -63/U 4-#0 (coax) -115/U 5-#16 5-#16 5-#1 5-#16 I v v v Ì è q Ì è q Ì è q Ì è VI I (coax) / (coax) I O YOU # O O 5-#16 5-#16 5-#16 3-#1; -#8 3-#16; -#8 1-#16; 4-#1 -#16; 3-#1 3-#1; -#4 I Ì è v è v è Ì è q Ìè Ì è Ì è Ì è q VI I () (,,,) YOU # O O 3-#16; -#1 5-#8 5-#8 5-#8 -#16; 1-#1; -#4 3-#1; -#0 -#16; 3-#4 I v q v v v Ìs Ì q Ìs VI I ; for W (); (ll others) #10 or 1 wire ; ; for W #18 wire O 4 3 YOU * # O O 5-#4 1-#8; 4-#4 5-#0 4-#0; 1-#1 6-#16 6-#16 4-#16; -#8 I q v v v Ì è q è Ì q Ì è q VI I I I * most popular 74 or assistance in orth merica: sales@peigenesis.com

11 O I/ I I or assistance in urope and hina, please see the back cover for a complete listing of our branch offices and contact numbers. pecifications subject to change. YOU Y U O O YOU # O O 1-#16; 5-#1 3-#16; 3-#8 1-#16; 5-#1 for #10 wire 4-#16; -#1 1-#16; 5-#1 4-#16; -#1 3-#16; 3-#4 4-#1; -#8 I Ì è q Ì q v Ì è q Ì è s Ì Ì q v VI I (,,,, ); () (,, )(,, ) YOU * # O O 3-#1; 3-#0 4-#4; -#0 1-#1; 1-#4 (coax) -6/U; 7-#16 7-#16 5-#16; -#1 5-#16; -#1 4-#0 (coax) -9/U or -14/U I Ì q Ì è q v v Ì è q Ì è q v è s VI I / coax I I YOU 0-15* # O O 7-#1 7-#1 for #14 or 16 wire 5-#16; -#1 7-#1 7-#16 7-#1 5-#16; -#1 I Ì èq v è Ì Ì Ì è q Ì VI I 1/8 spacing / (,,, ); (,, ) 100 YOU # O O 7-#8 3-#16; 3-#1; 1-#8 7-#16 7-#8 or 1 wire 7-#1 5-#8 for #10 or 1 wire, -#8 for #16 wire; -#8 5-#8 I Ì è q Ì è s Ì è s v v v v VI I (,,, ) (,, ) 6 O (O.) YOU # O O 3-#1; -#8; -#4 3-#16; -#8; -#4 7-#4 (coax) -6/U 7-#4 7-#4 (coax) -58/U 7-#4 I Ì è q Ì v v v v VI I (); (ll others) (, ); (); (coax) (coax) (, ); (, ) I Y: I ( =) I (Ì=; v=non Q) 97 (è=97) V9534 ( ) 3450 (q=; s=non Q) hermocouple () O =16 =1 =8 =4 =0 ating face view of pin inserts 7 O * most popular

12 O I/ I I or assistance in orth merica: sales@peigenesis.com YOU Y U O O 10 O YOU 18-1* # O O 10-#16 10-#16 10-#16 5-#16; 5-#1 9-#16; 1-#8 6-#16; 4-#1 I Ì è q v è s v ès v Ì è s Ì è s VI I (,,, ) (,,, ); (, ); (, ) I(all others) I(balance) (,,,,,) I I YOU Y # O O 6-#1; 3-#8 7-#16; -#1 9-#8 5-#16; 4-#4 4-#16; -#1; -#4; 1-#0 -#1; 7-#8 (coax) -180/U I Ì è q Ì s v v Ì s v VI I (,, ); (,, ); (coax) (all others) (all others) I YOU 0-18* # O O 6-#16; 3-#1 8-#16; 1-#1 6-#16; 3-#1 8-#16; 1-#1 9-#16 8-#16; 1-#8 6-#1; 3-#8 I Ì è q Ì è q Ì è Ì s Ì è Ì è s Ì è q VI I (); (all others) (); (all others) I YOU # O O 8-#1 6-#1; -#0 6-#1; -#0 6-#1; -#0 (coax) -7/U 4-#8; 4-#0 9-#1 7-#16; -#1 I Ì è s Ì q v v v Ì èq VI I (,, ); (coax) (), I(all others) (all others) 9 O I I I Y: I ( =) I (Ì=; v=non Q) 97 (è=97) V9534 ( ) 3450 (q=; s=non Q) hermocouple () O =16 =1 =8 =4 =0 ating face view of pin inserts 8 O YOU 18-8* 0-7* # O O 7-#16; 1-#1 8-#16 7-#16; 1-#1 7-#16; 1-#1 for #16 wire 8-#16 8-#1 8-#1 8-#1 for #14 or 16 wire I Ì è q Ì èq Ì v s v Ì è s Ì èq s v VI I (,,,) ; ; (,,,, ); (); () (); (all others) I(all others) (all others) (all others) (,, ) (all others) (all others) * most popular

13 O I/ I I or assistance in urope and hina, please see the back cover for a complete listing of our branch offices and contact numbers. pecifications subject to change. YOU Y U O O YOU # O O 11-#16 9-#16; -#1 6-#16; 5-#1; 5-#8 1-#16; 10-#4 (coax) -59/U 1-#16; 10-#4 (coax) -9/U 10-#4; 1-#16 I Ì è q Ì èq Ì v v v VI I (coax) (coax) I Q 11 O YOU # O O 8-#16; 4-#1 1-#16 10-#16; -#1 6-#16; 6-#1 1-#16 1-#1 I v è Ì è s Ì è q Ì è s v VI I (,,); () (balance) (); (,,,, ) (, ); I(,,,) 1 O 13 O YOU * # O O 13-#16 13-#16 13-#16 5-#16; 8-#1 7-#16; 3-#1; 3-#8 13-#1 14-#16 I Ì è v è v è v v v Ì èq VI I I I I I 14 O I O I Y: I ( =) I (Ì=; v=non Q) 97 (è=97) V9534 ( ) 3450 (q=; s=non Q) hermocouple () O =16 =1 =8 =4 =0 ating face view of pin inserts YOU -19* # O O 14-#16 7-#16; 7-#1 1-#16; -#1 4-#16; 10-#1 1-#16; -#1 1-#16; -#4 1-#8; -#16 I Ì èq v Ì è q Ì è q Ì Ì q v VI I (,,, ); (all others) different per 1651 : 5-#1; -#4 * most popular

14 O I/ I I or assistance in orth merica: sales@peigenesis.com YOU Y U O O YOU # O O 1-#1; 18-#1 (coax) 19-#1, 0-#16 0-#1 0-#1 for #10 wire 1-#8-188/U or -174/U I v v Ì ès v v v VI I (coax) U V 90 U V O Q U V U V W X 0 O 1 O YOU 0-9* * 4-67 # O O 17-#16 10-#16; 7-#1 15-#16; -#1 19-#16 19-#16 19-#16 19-#1 I Ì èq v v v Ì è q v VI I (,, Q); I I (all others) Q U 17 O I Y: I ( =) I (Ì=; v=non Q) 97 (è=97) V9534 ( ) 3450 (q=; s=non Q) hermocouple () O =16 =1 =8 =4 =0 ating face view of pin inserts YOU # O O 9-#16; 4-#8; 3-#8 for #10 wire 9-#16; 7-#8 for #10 wire 7-#8; 9-#16 1-#1; 4-#4 (coax) -58/U 1-#16; 4-#4 6-#16; 5-#1; 5-#8 I v v v v v Ì VI I (coax) Q Q I Q YOU * * 8-66 # O O 4-#16; 11-#1 15-#16 10-#16; 5-#1 6-#1; 4-#8; -#4; 3-#0 16-#16 14-#16; -#1 14-#1; -#8 I v Ì è q Ì s Ì èq Ì èq v VI I (); (-); (,,,, ); (-) (all others) O 15 O I O 16 O pecial arrangement for 3450 eries * most popular

15 O =16 =1 =8 =4 =0 ating face view of pin inserts U V W X I YOU Y U O O I O U V W O YOU 8-11* # O O 18-#16; 4-#1 18-#16, 4-#1 -#1 18-#16; -#1; -#0 3-#16 I Ì è q Ì è v s vs VI I, Q, U, V, W, X=; I (balance) O I U W X V W X V Y Z U I Y: I ( =) I (Ì=; v=non Q) 97 (è=97) V9534 ( ) 3450 (q=; s=non Q) hermocouple () YOU # O O 16-#16; -#1; 18-#16; 5-#1 16-#16; -#1; 15-#16; 8-#8 (coax) 16-#16; -#1; 1-#8; 3-#16 3-#8; -#4 3-#8; -#4-14/U -#8 (coax) -14/U; -#4 I Ì è q Ì è q v s v v s VI I (coax) (coax) Y Z X a W V U O I U W X V 3 O Q U W X Z V O I/ I I O (O.) 4 O 5 O Q U V W X Y Z Q U V W Z X Y a YOU * # O O 18-#16; 4-#1; 1-#4 16-#16; -#1; 3-#8; -#4 4-#16 5-#16 5-#1 I s s Ì è q v v VI I I 6 O 8 O 9 O a Z b U Y d V X W I V Y O W c Z a Q U X b YOU 8-1* # O O 6-#16 6-#16 4-#16; 1-#1; 1-#0 8-#16 19-#16; 9-#1 16-#16; 9-#8; 4-#4 I Ì èq v è s s v Ì VI I I * most popular or assistance in urope and hina, please see the back cover for a complete listing of our branch offices and contact numbers. pecifications subject to change. 79

16 O I/ I I O =16 =1 =8 =4 =0 ating face view of pin inserts c d e Y Z a b X U V W O I c d e 30 O Y Z a b X U V W O I I Y: I ( =) I (Ì=; v=non Q) 97 (è=97) V9534 ( ) 3450 (q=; s=non Q) hermocouple () YOU # O O 4-#16; 6-#1 4-#16; 6-#1 for #10 wire 4-#16; 6-#1 31-#16 14-#16; 14-#1; -#8; 1-#4 14-#16; 14-#1; -#8; 1-#4 I Ì è v Ì q v Ì è q v s VI I 34 O U V W X Y Z a b c d e h j f g k m YOU Y U O O V U W X Y Z a b c g e d h f k j m l I O U V W X Y Z a b h j k g c d e c d e f b W X Y Z a V U O YOU * 3-7* # O O 30-#16; -#1; -#8 35-#16 8-#16; 7-#1 35-#16 35-#16 for #1 wire 35-#1 I v Ì èq Ì è q Ì èq v v VI I I(,,, ); (all others) (); (balance) / O I Q b c d k j h a Z U V e m f W g X Y 31 O b Q c j d k h a Z m e g Y U V f W X O 37 O 38 O 39 O h g p f d n c m b a i U j V q k W X Z Y U V W X Z a b c d e f h k m g j n p r s b a Z Y c X s m k d W t r n V j q p f i g U h b a Z Y c X s m k d W t r n V j q p f i g U h YOU * # O O 0-#16; 3-#1; 13-#8 (coax) -14/U 37-#16 38-#1 31-#16; 8-#8 31-#16; 8-#8 for #6 wire I v Ì è q v v v VI I (coax) 4 O 43 O 44 O 46 O a b Z c Y j k d X i m f U q r W h n g p s V v t u w YOU # O O 37-#16; 5-#1 40-#16; -#8 (coax) -161/U 18-#16; 4-#1; 1-#8 43-#16; 1-#8 (coax); -187/U 46-#16 I v v v v v q VI I I/ (coax) (coax) * most popular 80 or assistance in orth merica: sales@peigenesis.com

17 O =16 =1 =8 =4 =0 ating face view of pin inserts I O U V W X Y Z a b c h n r d j x u e f g k t p v w z y s m W I O V Y U X Z b c d e f g k h j n p m r s u t v w x z y a 47 O YOU 36-7* # O O 40-#16; 7-#1 46-#16; 1-#1 40-#16; 7-#1 40-#16; 7-#1 40-#16; 7-#1 for #10 wire I Ì èq Ì èq v s v s v VI I YOU Y U O O I O Q U V W X b c d j k r e l p t f m q u Y Z a g h i n s o I Y: I ( =) I (Ì=; v=non Q) 97 (è=97) V9534 ( ) 3450 (q=; s=non Q) hermocouple () 48 O I O U V W X Y Z a b c YOU * # O O 47-#16 4-#16; -#1; 1-#8 48-#16 48-#16 48-#16 I v Ì q v Ì è q Ì ès VI I I O Q U V W X Y Z a b c d e f g h j k m n p q r t u v w y z x s h n r d j 100 x u e f g k t p v w z O Q U V W X Y Z a b c d e f g h j k m n p q r t u v w y y z s x m s O I/ I I O 110 O Q U V W X Y Z a b c d e f g h j k q m n p r s t u v w x y z z d e y Q f x g O w Y h v c X Z j b a u W U k V t m s n r p q Q X W V U Y f f e d c b a Z n l k j h rg m v t r p u s y w z x U V W X Y Z a b c d f g h i q j k m n p r t u v w x s y z YOU # O O 48-#16 48-#16 for #14 wire 48-#16 5-#16 5-#16 I Ì ès v v è Ì q VI I 53 O U U Y V W X Z a b c d f g h i j k q s m n p r t u x y z v w Y V W X Z a b c d f g h i j k q s m n p r t u x y z v w YOU # O O 5-#16 50-#16; 3-#1 for #10 wire 50-#16; 3-#1 I è v v VI I * most popular or assistance in urope and hina, please see the back cover for a complete listing of our branch offices and contact numbers. pecifications subject to change. 81

18 O I/ I I O = 0 =16 =1 =8 =4 =0 ating face view of pin inserts O U V W X Y Z a c d e b f m g h j k n p q s t u v x y w z 54 O r YOU Y U O O O U V W X Y Z a b c d e f g h j k m n p q r s t u v w x y z I Y: I ( =) I (Ì=; v=non Q) 97 (è=97) V9534 ( ) 3450 (q=; s=non Q) hermocouple () 55 O YOU # O O 54-#16 54-#16 55-#16 5-#16; 4-#1 55-#16; 3-#1; 1-8 I v s v v s v VI I I O O U V W X Y Z a b c d e f g h j k n q m p r s t u v w x y z O 59 O O YOU # O O 60-#16 60-#16 60-#16 for #14 wire 41-#0; 0-#16 61-#16 for #14 wire I v Ì s v v VI I I O YOU # O O 61-#16 61-#16 6-#16 for #14 wire 6-#16 I v v v v VI I 85 O U V W X Y Z a b c d f g h i j k m n p q r s t u v w x y z U V W X Y Z U V YOU # O O 85-#16 I Ìq VI I * most popular 8 or assistance in orth merica: sales@peigenesis.com

19 I- VIW O I I YOU Y IZ O IZ O OIO YOU W X Y Z 8-1 è Ì q Ì^ q è Ì q è Ì^ q 63# v s º =Ir.; =on v s º =u; =on v s º =l.; =h v s =Ir.; =on.; =u v s =l.; =h.; =u v s 10-4 =l.; =h v s 10-4 =h.; =on v s =h.; =l.; =u v s 10-4 =h.; =l v s 10-4 =Ir.; =on v s 10-4 =u; =on v s =u; =l.; =Ir v s , =on.; =h v s , =h.; =l. 1-1 v s º 1- è v s º 1-3 è Ì q Ì q è 1-3 =on.; =Ir v s º =h.; =l v s º = Ir.; =on v s º =u; =on v s 1-3 =l.; =h v s º =h.; =l v s º =Ir.; =on v s 1-3 =Ir.; =on v s 1-3 =u; =on v s 1-3 =h.; =on. 1-6 v s 1-3 =h.; =l è I 1-5 è Ì q è Ì q è Ì q I 14-4 è Ì^ è Ì q I ins in receptacle, sockets in plug only ^ 5015 Q not all configurations #otation commercial only, not -approved I OIIO (OIO) I Y: 97 (è=97) I (Ì=; v=non Q) I ( =) V9534 ( ) 3450 (q=; s=non Q) hermocouple () O UY Y: lumel (l.) hromel (h.) onstantan (on.) opper (u) Iron (Ir.) 97 eries I eries I/ V O VI I O I/ I I O: 16 contacts are used in shell sizes 8, 10, 10, 1, 14, & 16 or assistance in urope and hina, please see the back cover for a complete listing of our branch offices and contact numbers. pecifications subject to change. 83

20 O I/ I I YOU Y IZ I Y: 97 (è=97) I (Ì=; v=non Q) I ( =) V9534 ( ) 3450 (q=; s=non Q) hermocouple () O UY Y: lumel (l.) hromel (h.) onstantan (on.) opper (u) Iron (Ir.) O IZ O OIO YOU W X Y Z 97 eries I eries I/ V O 14-6 è Ì q # I 14-7 è Ì q è Ì q è v s º I è v s I 14-1 è v s è v s è v I v s =l.; =h v s , =u; =l.; =h v s =Ir.; =on v s ,, =Ir.;,, =on v s , =Ir.;, =on v s =Ir.; =on.;, =u v s , =l.;, =h v s =l.; =h.; =u v s =u; =on v s 14-9 =l.; =h v s =l.; =h.; =Ir.; =on.;, =u v s , = l.;, =h.; =Ir.; =on v s , =on.;, =u v s ,, = u;,, =on v s =l.; =h.; alance=u v s =h.; =on.;, =u v s =on.; =h.; =u v s , =h.;, =l v s ,, =u; =on v s 14-9 =on.; =u v s , =u; =l.; =h v s , =h.;, =l v s , =u;, =on v s , =l.;, =h v s , =l.;, =h v s 14-9 =h.; =l. 147 v Ì q è Ì q Ì s è Ì s è Ì è Ì è Ì q è v è v è v è v v s 16-4 =h.; = l v s =l.; =; alance=u VI I O: 16 contacts are used in shell sizes 8, 10, 10, 1, 14, & 16. #otation commercial only. ot -approved. ot used for 97 series. 84 or assistance in orth merica: sales@peigenesis.com

21 YOU Y IZ I Y: 97 (è=97) I (Ì=; v=non Q) I ( =) V9534 ( ) 3450 (q=; s=non Q) hermocouple () O UY Y: lumel (l.) hromel (h.) onstantan (on.) opper (u) Iron (Ir.) 97 eries I eries I/ V O O IZ O OIO YOU W X Y Z v s =on.; alance=u è v è v è v è v Ì s è Ì s è Ì q è Ì q è Ì q è Ì q è Ì q = Ir.; = on v s =l.; =h v s =l.; =h.;, =u v s =l.; =h.; =u v s =on.; =u v s =l.; =u; =h v s =on.;, =u v v s =l.; =h v s =on.; =u VI I 1831 è v (,,,) I (all others) O I/ I I è Ì q (,,,) I (all others) 18-3 è Ì è Ì q è Ì q Ì q Ì ^ s è Ì q è Ì q I è Ì q è Ì q è Ì q è Ì q Ì ^ s è Ì q , =Ir., =on è Ì ^ s è v s I è v s I è v s è Ì ^ è Ì ^ q è v s (,,,) I (all others) 18-4 è v s (,,,) I (all others) 18-5 è v è v ocket only for 97 eries ^ 5015 Q not all configurations ocket only for 3450 series in only for 3450 O: 16 contacts are used in shell sizes 8, 10, 10, 1, 14, & 16 or assistance in urope and hina, please see the back cover for a complete listing of our branch offices and contact numbers. pecifications subject to change. 85

22 O I/ I I YOU Y IZ I Y: 97 (è=97) I (Ì=; v=non Q) I ( =) V9534 ( ) 3450 (q=; s=non Q) hermocouple () O UY Y: lumel (l.) hromel (h.) onstantan (on.) opper (u) Iron (Ir.) O IZ O OIO YOU W X Y Z 97 eries I eries I/ V O 18-7 è v s è v s è Ì^ è v è v è 1 V 1 V 4 Vdc, 17 Vac v s =Ir.;, =on.; =u;, =ummy 18-5 v s =Ir.; =on.; =h.; =l.; =ummy v s , =Ir.;, =on.;, =ummy v s , =l.;, =h v s ,,,, I=Ir.;,,,, =on v s ,, =l.;,, =h v s , =Ir.;,, =on.; =u v s , =l.;,,=h.; =u v s , =Ir.;, =on.; =h.; =l v s ,, =Ir.;,, =on v s , =on.;, =u v s =Ir.; =on.; alance=u v s ,,,, I=u;,,,, =on v s ,, =u;,, =on v s , =l.;, =h.; =u v s =l.; =h.; alance=u v s =Ir.; =on.; =h.; =l.; =u v s =on.; alance=u 18-7 v s =on.; alance=u v s =l.; =h.; alance=u v s =h.; =l.; =Ir.; =u;, =on. VI I (), I(all others) 016 è v I 037 è v I 0- v q è Ì^ è Ì q è Ì^ è Ì q (,.,) I(all others) 0-8 è Ì q I 0-9 Ì s (), (all others) 0-11 è Ì I 0-1 Ì^ è Ì q è Ì q è Ì q è Ì^ q è Ì q è Ì q Ì^ è Ì q ocket only for 3450 series ^ 5015 Q not all configurations O: 16 contacts are used in shell sizes 8, 10, 10, 1, 14, & or assistance in orth merica: sales@peigenesis.com

23 YOU Y IZ I Y: 97 (è=97) I (Ì=; v=non Q) I ( =) V9534 ( ) 3450 (q=; s=non Q) hermocouple () O UY Y: lumel (l.) hromel (h.) onstantan (on.) opper (u) Iron (Ir.) 97 eries I eries I/ V O O IZ O OIO YOU W X Y Z 0- Ì q è Ì è Ì q è v I 0-6 v è Ì q è Ì q è v I 0-3 è v s (,,,) I(all others) 0-33 è Ì q # 0-51 v v s =Ir.; =on.; =h.; =l v s ,,, =Ir.;,,, =on v v v v s =h.; =l.; alance=u 0-61 v s ,, =u; alance=on. 0-6 v s ,, =l.;,, =h.; =u 0-64 v s =l.; =h.; alance=u 0-65 v s ,,,,,, =Ir.;, I,,,,, =on v v s =l.; I=h.; alance=u 0-68 v s ,,, =on.;,,, =u 0-69 v s ,,,,,, =u;, I,,,,, =on v s ,,,,,,,, =Ir.;,,,,,,, =on v s =l.; =h.; alance=u 0-74 v s ,,,,,,, =Ir.;,,,,,,, =on.;=u 0-75 v s =l.; alance=h v s =on.; alance=u 0-79 v (); (all others) 0-80 v s ,,,, I,, =u;,,,,,, =on v s ,,,, I,, =h.;,,,,,, =l. 0-8 v s ,,,,,,, =l.;,,,,,,, =h.; =u è Ì è Ì q è Ì q è Ì q Ì q Ì q è Ì^ è Ì s è Ì s è Ì s è Ì^ VI I -13 è Ì^ (-) () O I/ I I #otation commercial only, not -approved educed contact crimp pot ^ 5015 Q not all configurations ocket only for 3450 series ***in only for 3450 series or assistance in urope and hina, please see the back cover for a complete listing of our branch offices and contact numbers. pecifications subject to change. 87

24 O I/ I I YOU Y IZ I Y: 97 (è=97) I (Ì=; v=non Q) I ( =) V9534 ( ) 3450 (q=; s=non Q) hermocouple () O UY Y: lumel (l.) hromel (h.) onstantan (on.) opper (u) Iron (Ir.) O IZ O OIO YOU W X Y Z 97 eries I eries I/ V O -14 è Ì q VI I -15 è Ì s (-,, ) () -16 è Ì Ì^ s () (all others) -18 è Ì s (-) (all others) -19 è Ì q è Ì^ Ì^ q è Ì q è Ì q (-): (-) -4 Ì (,, ) (,, ) -6 è /8 spacing -7 è Ì s () (all others) -8 è Ì^ è v s è v è v s Ì^ (-) (-) -34 è Ì s (); (all others) -57 v s ,,,,,,, =Ir.;,,,,,,, =on.;, U, V=u -60 v s U=l.; =h.; alance=u -6 v s ,,, =l.;,,, =h. -63 v v (); (all others) -68 v s ,,,,,, =Ir.;,,,,,, =on. -69 v s ,,,,,, =u;,,,,,, =on. -70 v v s V=l.; U=h.; alance=u -7 v s =l.; =h.; alance=u -73 v s =l.; =h.; alance=u -74 v s 8 8-3,,, =Ir.;,,, =on. -75 v s =l.;,,, =u; =h.; =Ir.; =on. -76 v 1 1 W=on.; alance=u -77 v s ,,,,,,, =u;,, =Ir.;,, =on. -78 v s ,,,,,,,,, =on.; alance=u -79 v s ,,=on.;, =u -80 v v è Ì q Ì^ s è Ì q è Ì^ s (,,) (all others) 4-7 è Ì q ^ 5015 Q not all configurations 88 or assistance in orth merica: sales@peigenesis.com

25 YOU Y IZ I Y: 97 (è=97) I (Ì=; v=non Q) I ( =) V9534 ( ) 3450 (q=; s=non Q) hermocouple () O UY Y: lumel (l.) hromel (h.) onstantan (on.) opper (u) Iron (Ir.) O IZ O OIO YOU W X Y Z 97 eries I eries I/ V O 4-9 è Ì è Ì q è Ì q è Ì q v s VI I 4-16 è Ì^ s (,,, ) (,, ) 4-17 Ì^ è v è Ì q è Ì s è Ì q s è v (,, ) (all others) 4-6 è v (,, ) (all others) 4-7 è Ì s è Ì q I 4-51 v v 1 V 1V 30 Vdc, 1 Vac 4-53 v v s =l.; =h.; alance=u 4-57 v s ,,, V, Y, W,,,, U,, =h.; alance=l v v v v s ,,, =Ir.;,,, =on.;, =h.;, U=l.; alance=u 4-63 v s ,,,,,,,,, U, W, Y=u;,,,, Q,,,,, V, X, Z=on v s ,,,,,,, =Ir.;,,,,,,, =on v v v I 4-68 v s =on.; alance=u 4-71 v v v v s I 4-81 v ,,,, I,,,, =u;,,,,,, O=on v (18) /oax 4-96 v I 4- v è Ì q (,, ) (all others) 8- è Ì q è Ì s Ì^ s (,, ) (all others) 8-5 Ì^ s è Ì^ v educed contact crimp pot ^ 5015 Q not all configurations ( ) umber of contacts that are coax O I/ I I or assistance in urope and hina, please see the back cover for a complete listing of our branch offices and contact numbers. pecifications subject to change. 89

26 O I/ I I YOU Y IZ I Y: 97 (è=97) I (Ì=; v=non Q) I ( =) V9534 ( ) 3450 (q=; s=non Q) hermocouple () O UY Y: lumel (l.) hromel (h.) onstantan (on.) opper (u) Iron (Ir.) YOU W X Y Z 97 eries I eries I/ V O O IZ O OIO 8-8 è Ì^ s (, ) () (all others) 8-9 è Ì q è Ì q () (all others) 8-11 è Ì q è Ì q è v s è Ì q è Ì s è Ì q (-) () (-) 8-18 è Ì s () (,,,, ) (, ) I(,,, ) 8-19 è Ì s (,,,,, ) (, ) (, ) 8-0 è Ì^ q è Ì q Ì^ q v v s , =l.;, =h.; alance=u 8-58 v s ,,,,, =l.;,,,,, =h.;, =u 8-59 v v s ,,, Z, m, r, n, a,,,, X, k, h,,,, d=ir.; alance=on v s ,,,, =l.;,,,, =h.; alance=u 8-64 v s , d=l.;, j=h.;,,,,,,,,,,,,,, W, X, Y, Z=on.;alance=u 8-65 v s ,,,,,,,,, V=Ir.; X, Z=l.;,,,,,,,, U, W=on.;Y, a=h.; b, d=u 8-66 v v s U=on.; alance=u 8-68 v s =l.; U=h.; alance=u 8-69 v s =l.; =h.; alance=u 8-70 v s =l.; =h.; alance=u 8-7 v 3 3(3) oax 8-74 v v v v v v s =on.; alance=u 8-81 v s ,,, Z, n, s=ir.;,,, f, g, r=on.;,,, b, e, j=l.;,,, X, h, k=h.; alance=u 8-Y v v v () (all others) I 3-1 Ì q () (all others) 3- Ì s VI I educed contact crimp pot ^ 5015 Q not all configurations ( ) umber of contacts that are coax 90 or assistance in orth merica: sales@peigenesis.com

27 YOU Y IZ I Y: 97 (è=97) I (Ì=; v=non Q) I ( =) V9534 ( ) 3450 (q=; s=non Q) hermocouple () O UY Y: lumel (l.) hromel (h.) onstantan (on.) opper (u) Iron (Ir.) YOU W X Y Z 97 eries I eries I/ V O O IZ O OIO 3-3 Ì s Ì^ (,,, ) ( all others) 3-5 è Ì è Ì q è Ì q I (,,, ) (all others) 3-8 è Ì Ì^ q Ì^ (, ) () () () 3-1 Ì^ (,,,, ) 3-13 è Ì q v Ì^ q v s è Ì q (all others) 3-19 v s () (all others) 3-0 v s v s v v v I 3-51 v =h.; = l.; alance=u 3-5 v v I/ 3-55 v , =h.; O, =l.; alance=u 3-56 v v 8 6 () oax 3-58 v.4 4(4) oax 3-59 v 4 40 () oax 3-60 v (8) /oax 3-6 v () /oax 3-63 q v I 3-68 v (4) /oax 3-73 v q v 9 7(7) oax 3-76 v v v è v è Ì^ Ì^ q Ì^ (, ) () 36-5 è Ì q è Ì q è Ì q è Ì q educed contact crimp pot ^ 5015 Q not all configurations ( ) umber of contacts that are coax VI I O I/ I I or assistance in urope and hina, please see the back cover for a complete listing of our branch offices and contact numbers. pecifications subject to change. 91

28 O I/ I I YOU Y IZ I Y: 97 (è=97) I (Ì=; v=non Q) I ( =) V9534 ( ) 3450 (q=; s=non Q) hermocouple () O UY Y: lumel (l.) hromel (h.) onstantan (on.) opper (u) Iron (Ir.) 97 eries I eries I/ V O O IZ YOU W X Y Z 36-9 è Ì q è Ì q è v s è v s Ì^ (,,Q) (all others) Ì^ è Ì q () (all others) v s v s v s v v s v v Ì^ q v s u, v, w=l.; x, y, z=h.; alance=u v v v s ,,,,,,,,,, V, X, Z, b, d, f, h, k, q, n, m, u, w, y=on.; alance=u v v v s ,,,,,,,,,,, V, f, X, Y, h, j, c=on.; alance=u 36-6 v s ,, =l.;,, =h.; alance=u v 4 4(4) oax v 4 4(4) oax s v v 7 7(7) oax v (1) v v v v v v v s v, g=ir.; p, y, c=on. x=h.; alance=u v 7 7(7) oax v / è v s W=l.; f=h.; alance=u v s =l.; =h.; alance=u 36- v Ì q s s O OIO VI I educed contact crimp pot ^ 5015 Q not all configurations ( ) umber of contacts that are coax 9 or assistance in orth merica: sales@peigenesis.com

29 YOU Y IZ I Y: 97 (è=97) I (Ì=; v=non Q) I ( =) V9534 ( ) 3450 (q=; s=non Q) hermocouple () O UY Y: lumel (l.) hromel (h.) onstantan (on.) opper (u) Iron (Ir.) 97 eries I eries I/ V YOU W X Y Z O O IZ O OIO 40-4 s ## s v s s ,Q,U,V,W,X = ; al.= 40-9 Ì q Ì^ v v Ì q v v s ,,,,,,,, U, W, Y, a, c, f, h, j, m, p, r, t, v, x, z,,,,,,,,, U, W, Y,,,,,,,,, U=Ir.; alance=on v s =h.; =on.; alance=u v Ì s v v (13) oax v 4 4(4) oax v (10) /oax v v v (10) /oax v v 6 1 1(1) 4(4) /oax v v , 60=Ir.; 57, 58, 59=on.; 56=h.; alance=u v =Ir.; 7, 8, 9, 31, 3, 34, 36, 37=on.; 5, 39, 40, 41=l 43,44,45, 46, 47, 48, 49, 5, 53, 54=h.; alance=u v v v v v 4 4(4) /oax v v v v V v 3 3#/ VI I O I/ I I educed contact crimp pot ^ 5015 Q not all configurations ( ) umber of contacts that are coax or assistance in urope and hina, please see the back cover for a complete listing of our branch offices and contact numbers. pecifications subject to change. 93

30 O I/ I I O IZ I & O I O I16-16 I16-16 I16-16 I I16-1 I16-1 I16-1 I I16-14 I16-14 I16-14 I I16-0 I16-0 I16-0 I I16- I16- I16- I I16-4 I16-4 I16-4 I I16-16 I16-16 I16-16 I I16-1 I16-1 I16-1 I I16-14 I16-14 I16-14 I I16-18 I16-18 I16-18 I I16-0 I16-0 I16-0 I I16-04 I16-04 I16-04 I I16- I16- I16- I I1-1 I1-1 I1-1 I (7.9) 1 I O O O 1 igh-ower - - I I1-8 I1-8 I1-8 I I1-10 I1-10 I1-10 I I1-14 I1-14 I1-14 I I1-16 I1-16 I1-16 I I1-18 I1-18 I1-18 I I1-0 I1-0 I1-0 I I8-8 I8-8 I8-8 I WI IZ I O U O O IV O IV O 8 igh-ower - - I I8-10 I8-10 I8-10 I I8-1 I8-1 I8-1 I I4-4 I4-4 I4-4 I igh-ower - - I I4-8 I4-8 I4-8 I I0-0 I0-0 I0-0 I igh-ower - - I I0- I0- I0- I I0-4 I0-4 I0-4 I0-4 1 WI I WI I I ().31 (7.9).31 (7.9).563 (14.3).500 (1.7).750 (19.0) WI WI I I () (.3-3.0) (3.-4.5) ( ) ( ) ( ) olded items are standard crimp contacts. O OOU O Y I O 16 lumel * * 16 hromel * * Iron * * onstantan * * 16 lumel * * 16 hromel * * Iron * * onstantan * * 1 O OOU O Y I O 1 lumel * * hromel * * Iron * * onstantan * * hermocouple ypes: = Iron-onstantan = lumel-hromel = opper-onstantan = hromel-onstantan *ontact us for availability 16 contacts are used in 8, 10, 10, 1, 14 and 16 connector sizes only. 94 or assistance in orth merica: sales@peigenesis.com

31 OI O IZ WI O I OO (lue) 9-1 I OO 8-(hand) W7- (pneumatic) I & O I O W7 I OO & I ie-set, locator and o-o-o gauge OO OO OO ed in-lue ocket- reen IO I/IIO UI O O IIO OO XIO OO 59 it with ultiple ips O I/ I I (Yellow) reen (ed) ie et ocator 405-in 406-ocket (lue) 400 ie et ocator I4I I4X (Yellow) ie et ocator I0I I0X ontact us for additional tool accessories. or assistance in urope and hina, please see the back cover for a complete listing of our branch offices and contact numbers. pecifications subject to change. 95

32 O I/ I I OX O IZ 1 OX WI IZ 161/U 174/U 179/U 187/U 188/U 316/U 178/U 196/U 58/U 141/U 303/U I I & O OX O O IV O IV O (1) I O () () (5) (3) () U O O (1) () () () (5) () (3) () WI I WI I I (mm) ontact us for details WI WI I I (mm) I. X (3.) (4.5) - OI WI O I Yellow /U 6/U 6/U 10/U (1) (5) (3) () () (1) (5) (3) () () 8 161/U 174/U 179/U 187/U 188/U 316/U (1) (5) (3) () () (1) (5) (3) () () ontact us for details (3.8) 0.56 (6.5) White /U 195/U (5) () () (6) () () 140/U 30/U (5) () (5) () 55/U 14/U 14/U 3/U (5) () (5) () 59/U 6/U 6/U 10/U () () 4 1/U () () ontact us for details 0.79 (7.1) (9.3) lue /U 14/U 14/U 3/U () () ( ) Various platings available. vailability of coax contacts varies widely. ontact us for details. ll dimensions in inches (millimeters in parenthesis) 96 or assistance in orth merica: sales@peigenesis.com

33 OX O IZ 1 OX WI IZ 161/U 174/U 179/U 187/U 188/U 316/U 178/U 196/U 58/U 141/U 303/U I & O OX O 50/ /10-01 rimp ies OO -I OO I I U OO 50/ /10-07 OX U W O I/ I I /U 6/U 6/U 10/U 50/ / /U 174/U 179/U 187/U 188/U 316/U 50/ /U 195/U 50/ /U 30/U 50/ /U 14/U 14/U 3/U 59/U 6/U 6/U 10/U 50/ / /U 55/U 14/U 14/U 3/U 50/ / / / ll dimensions in inches (millimeters in parenthesis) or assistance in urope and hina, please see the back cover for a complete listing of our branch offices and contact numbers. pecifications subject to change. 97

34 O I/ I I O-ing arrel/hell Insert/ Insulator ontacts I/ OO U I/- I/ I/- Wave pring and kid Washer (Optional) oupling ut Individual Wire ealing rommet errule/leeve ompression ing ndbell/ ackshell/ able lamp 98 or assistance in orth merica: sales@peigenesis.com

35 I IUI O IZ I IIO X (4.78) (14.40) (4.78) (14.40) (4.78) (14.40) (4.78) (15.80) (4.78) (15.80) (4.78) (15.80) (4.78) (15.80) (4.78) (15.80) (4.78) (16.69) (4.78) (18.9) (4.78) (18.9) (4.78) (18.9) O IZ (3.4) (1.78) (1.6) (0.76) O I/ I I ll dimensions in inches (millimeters in parenthesis) or assistance in urope and hina, please see the back cover for a complete listing of our branch offices and contact numbers. pecifications subject to change. 99

36 O I/ I I Y 0,, 0, 30 IZ ( ) ( ) ±.008 (±0.) IIO (18.) (18.) (.8) (18.) (5.4) (3.) (15.9) (18.) (4.6) (3.) (3.0) (30.0) (3.) (19.) (18.) (7.4) (3.) (4.6) (3.5) (3.) (.4) (1.5) (7.4) (3.) (4.6) (3.5) (3.) (.4) (3.1) (30.8) (4.0) (7.0) (35.0) (3.) (5.6) (3.1) (34.) (4.0) (9.4) (38.0) (3.) (9.0) (3.1) (37.4) (4.0) (31.8) (41.0) (3.) (3.) (3.1) (40.9) (4.0) (34.9) (44.5) (3.7) (35.3) (4.1) (46.7) (4.0) (39.7) (50.8) (3.7) (41.4) (4.1) (53.4) (4.0) (44.5) (57.0) (4.3) (47.8) (4.1) (59.6) (4.0) (49.) (63.5) (4.3) (5.4) (4.1) (65.5) (4.0) (55.5) (69.9) (4.3) (59.0) ±.004 (±0.1) ±.01 (±0.3) ( ) 0, 0, 30 0, 0, 30 V X (+ 0.3) U (7.6) U (7.6) U (7.6) U (33.8) U (33.8) U (33.8) U (33.8) U (33.8) U (35.7) U (37.3) U (37.3) U (37.3) 1 1 X. X (48.0) (0.0) (48.0) (4.0) (48.0) (6.0) (56.0) (6.0) (57.0) (9.5) (57.0) (33.0) (57.0) (36.0) (57.0) (40.0) (57.0) (46.0) (60.0) (51.5) (60.0) (58.0) (60.0) (64.5) ll dimensions in inches (millimeters in parenthesis) 100 or assistance in orth merica: sales@peigenesis.com

37 Y 0, 0, hread I. 1 I. IIO U (10.4) (9.5) (53.6) (50.0) (81.) U (13.) (9.5) (54.5) (50.0) (8.1) U (16.) (9.5) (54.5) (50.0) (8.1) U (16.) (9.5) (56.9) (60.0) (90.7) U (19.) (9.5) (58.8) (60.0) (9.6) U (.0) (9.5) (58.4) (60.0) (9.) U (4.5) (9.5) (58.5) (60.0) (9.4) U (7.8) (9.5) (58.9) (65.0) (9.7) U (31.) (9.5) (63.) (65.0) (99.0) U (37.8) (11.0) (66.9) (65.0) (104.) U (45.) (11.8) (68.1) (80.0) (105.4) U I. X. 3 X. (51.) (11.8) (68.1) (80.0) (105.4) hread ±.008 (±0.) (±0.5) 3 4 X. 3 Z I. Z X (3.5) (11.7) (50.0) (7.7) (13.3) (15.5) (3.5) (11.7) (50.0) (10.6) (17.0) (19.1) (3.5) (11.7) (50.0) (13.5) (1.9) (3.9) (3.5) (11.5) (60.0) (13.5) (1.9) (3.9) (3.5) (11.5) (60.0) (14.6) (1.9) (3.9) (3.5) (1.7) (65.0) (18.7) (6.) (9.6) (3.5) (1.7) (65.0) (0.8) (6.) (9.6) (3.5) (1.7) (65.0) (4.6) (34.5) (37.8) (3.5) (1.7) (65.0) (7.0) (34.5) (37.8) (3.5) (15.) (70.0) (33.3) (43.6) (47.8) (3.5) (15.) (80.0) (38.5) (43.6) (47.8) (3.5) (15.5) (80.0) (48.) (5.6) (57.8) (+0.) O I/ I I ll dimensions in inches (millimeters in parenthesis) or assistance in urope and hina, please see the back cover for a complete listing of our branch offices and contact numbers. pecifications subject to change. 101

38 O I/ I I Y 1 Q IIO V IZ ( ) ( ) ±.008 (±0.) Q ±.008 (±0.) X (18.) (18.) (.8) (0.6) (5.) (18.) (4.6) (3.) (5.4) (9.8) (18.) (7.4) (3.) (8.6) (3.3) (1.5) (7.4) (3.) (8.6) (3.3) (3.0) (30.8) (4.0) (31.7) (34.8) (3.0) (34.) (4.0) (34.9) (37.8) (3.0) (37.4) (4.0) (38.1) (41.1) (3.0) (40.9) (4.0) (41.3) (44.6) (4.1) (46.7) (4.0) (47.6) (50.9) (4.1) (53.4) (4.0) (54.0) (57.1) (4.1) (59.6) (4.0) (60.6) (63.6) (4.1) (65.5) (4.0) (66.5) (70.0) +.01 (+ 0.3) U (7.6) U (7.6) U (7.6) U (33.8) U (33.8) U (33.8) U (33.8) U (33.8) U (35.7) U (37.3) U (37.3) U (37.3) 1 X. X (48.0) (0.0) (48.0) (4.0) (48.0) (6.0) (56.0) (6.0) (57.0) (9.5) (57.0) (33.0) (57.0) (36.0) (57.0) (40.0) (57.0) (46.0) (60.0) (51.5) (60.0) (58.0) (60.0) (64.5) ll dimensions in inches (millimeters in parenthesis) 10 or assistance in orth merica: sales@peigenesis.com

39 Y 1 hread IIO hread Z O I/ I I I. 1 I. X. 3 X. X U (10.4) (9.5) (53.6) (50.0) (81.) U (13.) (9.5) (54.5) (50.0) (8.1) U (16.) (9.5) (54.5) (50.0) (8.1) U (16.) (9.5) (56.9) (60.0) (90.7) U (19.) (9.5) (58.8) (60.0) (9.6) U (.0) (9.5) (58.4) (60.0) (9.) U (4.5) (9.5) (58.5) (60.0) (9.4) U (7.8) (9.5) (58.9) (65.0) (9.7) U (31.) (9.5) (63.) (65.0) (99.0) U (37.8) (11.0) (66.9) (65.0) (104.) U (45.) (11.8) (68.1) (80.0) (105.4) U (51.) (11.8) (68.1) (80.0) (105.4) ±.008 (±0.) (±0.5) 4 X. Z I. X (+0.) (3.5) (11.7) (50.0) (7.7) (13.3) (15.5) (3.5) (11.7) (50.0) (10.6) (17.0) (19.1) (3.5) (11.7) (50.0) (13.5) (1.9) (3.9) (3.5) (11.5) (60.0) (13.5) (1.9) (3.9) (3.5) (11.5) (60.0) (14.6) (1.9) (3.9) (3.5) (1.7) (65.0) (18.7) (6.) (9.6) (3.5) (1.7) (65.0) (0.8) (6.) (9.6) (3.5) (1.7) (65.0) (4.6) (34.5) (37.8) (3.5) (1.7) (65.0) (7.0) (34.5) (37.8) (3.5) (15.) (70.0) (33.3) (43.6) (47.8) (3.5) (15.) (80.0) (38.5) (43.6) (47.8) (3.5) (15.5) (80.0) (48.) (5.6) (57.8) ll dimensions in inches (millimeters in parenthesis) or assistance in urope and hina, please see the back cover for a complete listing of our branch offices and contact numbers. pecifications subject to change. 103

40 O I/ I I Y 4 U-OV U IZ Q X. X Q IIO U (+ 0.3) 1 X. V X (33.5) (8.5) (7.6) (36.0) (0.0) U (49.0) (43.5) (33.8) (49.0) (9.5) U (51.5) (46.0) (33.8) (50.0) (33.0) U (56.5) (50.5) (33.8) (50.0) (36.0) U (60.0) (54.0) (33.8) (51.0) (40.0) U (67.0) (61.0) (35.7) (51.0) (46.0) U (76.0) (67.6) (37.3) (53.0) (51.5) U (8.3) (74.3) (37.3) (53.5) (58.0) U (88.0) (80.0) (37.3) (54.0) (64.5) ll dimensions in inches (millimeters in parenthesis) 104 or assistance in orth merica: sales@peigenesis.com

41 Y 4 U-OV U 1 1 hread I. 1 I U (10.4) (9.5) (53.6) (50.0) (81.) U (19.) (9.5) (58.8) (60.0) (9.6) U (.0) (9.5) (58.4) (60.0) (9.) U (4.5) (9.5) (58.5) (60.0) (9.4) U (7.8) (9.5) (58.9) (65.0) (9.7) U (31.) (9.5) (63.) (65.0) (99.0) U (37.8) (11.0) (66.9) (65.0) (104.) U (45.) (11.8) (68.1) (80.0) (105.4) U I. X. IIO (51.) (11.8) (68.1) (80.0) (105.4) 3 X. hread ±.008 (±0.) (±0.5) 3 4 X. Z Z I. X (3.5) (11.7) (50.0) (7.7) (13.3) (15.5) (3.5) (11.5) (60.0) (14.6) (1.9) (3.9) (3.5) (1.7) (65.0) (18.7) (6.) (9.6) (3.5) (1.7) (65.0) (0.8) (6.) (9.6) (3.5) (1.7) (65.0) (4.6) (34.5) (37.8) (3.5) (1.7) (65.0) (7.0) (34.5) (37.8) (3.5) (15.) (70.0) (33.3) (43.6) (47.8) (3.5) (15.) (80.0) (38.5) (43.6) (47.8) (3.5) (15.5) (80.0) (48.) (5.6) (57.8) (+0.) O I/ I I ll dimensions in inches (millimeters in parenthesis) or assistance in urope and hina, please see the back cover for a complete listing of our branch offices and contact numbers. pecifications subject to change. 105

42 O I/ I I Y 6, 6 U Q 1 Q IIO 6 6 V IZ Q 1 X. Q X (.8) (5.5) (9.) (31.9) (3.0) (35.8) (3.0) (35.8) (36.5) (39.) (39.9) (4.6) (43.1) (46.9) (46.6) (49.9) (53.4) (56.4) (60.1) (63.0) (66.3) (69.1) (7.4) (75.0) +.01 (+ 0.3) U (7.6) U (7.6) U (7.6) U (33.8) U (33.8) U (33.8) U (33.8) U (33.8) U (35.7) U (37.3) U (37.3) U (37.3) 1 X. X (36.0) (0.0) (36.5) (4.0) (36.5) (6.0) (49.0) (6.0) (49.0) (9.5) (50.0) (33.0) (50.0) (36.0) (51.0) (39.) (51.0) (46.0) (53.0) (51.5) (53.5) (58.0) (54.0) (64.5) ll dimensions in inches (millimeters in parenthesis) 106 or assistance in orth merica: sales@peigenesis.com

43 Y 6, 6 U hread 1 1 IIO hread 3 3 Z O I/ I I I. 1 I. I. X. 3 X U (10.4) (9.5) (53.6) (50.0) (81.) U (13.) (9.5) (54.5) (50.0) (8.1) U (16.) (9.5) (54.5) (50.0) (8.1) U (16.) (9.5) (56.9) (60.0) (90.7) U (19.) (9.5) (58.8) (60.0) (9.6) U (.0) (9.5) (58.4) (60.0) (9.) U (4.5) (9.5) (58.5) (60.0) (9.4) U (7.8) (9.5) (58.9) (65.0) (9.7) U (31.) (9.5) (63.) (65.0) (99.0) U (37.8) (11.0) (66.9) (65.0) (104.) U (45.) (11.8) (68.1) (80.0) (105.4) U (51.) (11.8) (68.1) (80.0) (105.4) ±.008 (±0.) (±0.5) 4 X. Z I. X (+0.) (3.5) (11.7) (50.0) (7.7) (13.3) (15.5) (3.5) (11.7) (50.0) (10.6) (17.0) (19.1) (3.5) (11.7) (50.0) (13.5) (1.9) (3.9) (3.5) (11.5) (60.0) (13.5) (1.9) (3.9) (3.5) (11.5) (60.0) (14.6) (1.9) (3.9) (3.5) (1.7) (65.0) (18.7) (6.) (9.6) (3.5) (1.7) (65.0) (0.8) (6.) (9.6) (3.5) (1.7) (65.0) (4.6) (34.5) (37.8) (3.5) (1.7) (65.0) (7.0) (34.5) (37.8) (3.5) (15.) (70.0) (33.3) (43.6) (47.8) (3.5) (15.) (80.0) (38.5) (43.6) (47.8) (3.5) (15.5) (80.0) (48.) (5.6) (57.8) ll dimensions in inches (millimeters in parenthesis) or assistance in urope and hina, please see the back cover for a complete listing of our branch offices and contact numbers. pecifications subject to change. 107

44 O I/ I I U Y 6, 6 I Q 1 Q IIO 6 6 IZ Q 1 X. Q X (.8) (5.5) (9.) (31.9) (3.0) (35.8) (3.0) (35.8) (36.5) (39.) (39.9) (4.6) (43.1) (46.9) (46.6) (49.9) (53.4) (56.4) (60.1) (63.0) (66.3) (69.1) (7.4) (75.0) X. I. X. X U (8.5) (9.4) (30.0) (45.0) U (11.7) (9.4) (30.0) (47.0) U (14.9) (9.4) (30.0) (48.0) U (14.9) (9.4) (30.0) (57.0) U (17.4) (9.4) (35.0) (58.0) U (0.5) (9.4) (35.0) (61.0) U (3.) (9.4) (35.0) (61.0) U (6.0) (9.4) (40.0) (66.0) U (8.9) (9.4) (40.0) (53.4) U (36.7) (11.0) (45.0) (7.0) U (4.8) (1.6) (50.0) (75.0) U (48.8) (1.6) (55.1) (78.0) ll dimensions in inches (millimeters in parenthesis) 108 or assistance in orth merica: sales@peigenesis.com

45 6 U Q IIO Y U-U O I/ I I IZ OX. Q X. ±.008 (±0.) ±.004 (±0.1) ±.01 (±0.3) ( ) (7.6) (.8) (.8) (18.) (5.4) (3.) (7.7) (9.) (3.) (3.0) (30.0) (3Í.) (7.7) (3.0) (3.) (4.6) (3.5) (3.) (37.3) (3.0) (3.) (4.6) (3.5) (3.) (38.1) (36.5) (4.0) (7.0) (35.0) (3.) (38.1) (39.9) (4.0) (9.4) (38.0) (3.) (38.1) (43.1) (4.0) (31.8) (41.0) (3.) (40.6) (46.6) (4.0) (34.9) (44.5) (3.7) (41.3) (53.4) (4.0) (39.7) (50.8) (3.7) (44.8) (60.1) (4.0) (44.5) (57.0) (4.3) (44.8) (66.3) (4.0) (49.) (63.5) (4.3) (44.8) (7.4) (4.0) (55.5) (69.9) (4.3) X ( ) ( ) ±.008 (±0.) ±.004 (±0.1) ±.01 (±0.3) ( ) (37.7) (18.) (18.) (.8) (18.) (5.4) (3.) (37.7) (18.) (4.6) (3.) (3.0) (30.0) (3.) (37.7) (18.) (4.6) (3.) (3.0) (30.0) (3.) (5.0) (1.5) (7.4) (3.) (4.6) (3.5) (3.) (5.0) (3.0) (30.8) (4.0) (7.0) (35.0) (3.) (5.0) (3.0) (34.) (4.0) (9.4) (38.0) (3.) (5.0) (3.0) (37.4) (4.0) (31.8) (41.0) (3.) (5.0) (3.0) (40.9) (4.0) (34.9) (44.5) (3.7) (5.0) (4.0) (46.7) (4.0) (39.7) (50.8) (3.7) (5.0) (4.0) (53.4) (4.0) (44.5) (57.0) (4.3) (5.0) (4.0) (59.6) (4.0) (49.) (63.5) (4.3) (5.0) (4.0) (65.5) (4.0) (55.5) (69.9) (4.3) ll dimensions in inches (millimeters in parenthesis) or assistance in urope and hina, please see the back cover for a complete listing of our branch offices and contact numbers. pecifications subject to change. 109

46 O I/ I I Y 7, 70 U IIO 7 70 IZ ±.01 (±0.3) W I I. X. ±.010 (±0.3) ±.01 (±0.3) ( ) ±.007 (±0.) ±.016 (±0.4) U U (11.) (.4) (5.) (36.) (4.5) (18.) (4.0) (7.0) (31.8) U U (14.6) (.4) (7.5) (38.9) (6.8) (4.6) (4.8) (33.3) (41.3) U U (15.7) (.4) (7.5) (38.9) (6.8) (7.4) (4.8) (38.1) (44.4) U U (15.7) (.4) (7.5) (48.5) (3.1) (7.4) (4.8) (38.1) (44.4) U U (16.8) (.4) (9.0) (49.3) (33.7) (30.8) (4.8) (39.7) (47.6) U U (18.0) (.4) (9.1) (49.3) (33.7) (34.) (4.8) (44.5) (50.8) U U (0.) (.4) (9.1) (49.3) (33.7) (37.4) (4.8) (50.8) (54.) U U (0.) (.4) (9.1) (49.6) (33.7) (40.9) (4.8) (50.8) (57.) U U (.5) (.4) (10.0) (51.9) (35.) (46.7) (5.6) (55.6) (63.5) U U (4.7) (.4) (10.0) (51.9) (35.) (53.4) (5.6) (61.9) (69.8) U U (6.9) (.4) (8.3) (51.9) (35.) (59.6) (5.6) (71.4) (76.) U U ±.1 (±0.3) (9.6) (.4) (8.3) (51.9) (35.) (65.5) (5.6) (75.0) (8.5) ll dimensions in inches (millimeters in parenthesis) 110 or assistance in orth merica: sales@peigenesis.com

47 UOU im. -flange in front of panel im. -flange at rear of panel ee sealing screws on apage 490. IZ IIO () Y 0,, 0, 30, OUI O I O (18.) 0.16 (3.) (17.5) (19.1) (3.0) 0.16 (3.) (0.7) (5.4) (4.6) 0.16 (3.) (3.8) 1.15 (8.6) (4.6) 0.16 (3.) (3.8) 1.15 (8.6) (7.0) 0.16 (3.) (7.0) 1.50 (6.7) (9.4) 0.16 (3.) (30.) (35.0) 1.5 (31.8) 0.16 (3.) (33.4) (38.1) (34.9) (3.7) (36.5) 1.65 (41.3) (39.7) (3.7) (4.9) (47.6) (44.5) (4.3) (49.).15 (54.0) (49.) (4.3).15 (54.0).375 (60.3) (55.5) (4.3).375 (60.3).65 (66.7) 7/70 UOU IZ - - I (1.1) (.) (7.4) 1.15 (8.6) 16/ (30.7) 1.50 (31.7) (33.5) (34.9) (36.8) (38.1) (39.9) 1.65 (41.3) (43.) (44.5) (49.5).000 (50.8) 3.00 (55.9).50 (57.) (6.).500 (63.5) (68.6).750 (69.9) O I/ I I I ear ount IZ OU (7.70) (7.70) (7.70) 16.4 (6.15) (7.70) (7.70).303 (7.70) (7.70) (8.70) (7.85) (7.85) (7.85) ll dimensions in inches (millimeters in parenthesis) or assistance in urope and hina, please see the back cover for a complete listing of our branch offices and contact numbers. pecifications subject to change. 111

48 O I/ I I WOO OI tandard 3057 cable clamps have dual-clamping action to provide a balanced, positive hold on the wires and greatly reduce moisture transmission. his cable clamp accepts 340 bushings. 340 bushings can be nested to reduce the inside diameter to more closely match the diameter of the cable or wire bundle. UIU W/ XIU OW-O UIU W/ I I IZ ZI W W I () 10 5/8-4U ** / (7.9) 14 3/4-0U ** / (11.10) 16/16 7/8-0U ** / (14.7) U ** / (15.88) 0/ 1 3/16-18U ** / (19.05) 4/8 1 7/16-18U ** / (3.80) 3 1 3/4-18U ** / (31.75) 36-18U ** / (34.9) 40 1/4-16U / (41.8) OI UI OW-O ZI WI UI UI I UI IU I () (5.6) (7.9) (11.1) (14.3) (15.9) , (15.9) , (19.1) , (3.8) ** Other platings are available. aee page 17 for alternate platings. tandard waterproof cable clamp with mechanical strain relief for use with styles, and endbells. Internal neoprene gland and compression ring will seal a broad range of round cable diameters as listed below. or reduction of cable diameters, order the appropriate 340 bushing in table. WI I I () OIO UI IZ U X. I. U X. WI I. () (7.93) (4.80) (5.56) (11.1) 0.81 (7.10) (7.93) (5.56) 16/ (13.48) 0.31 (7.90) (11.10) (7.93) (15.87) (9.50) (11.10) (7.93) 0/ (19.00) (1.70) (13.74) (11.10) 4/ (3.8) 0.65 (15.90) (19.00) (13.74) (11.10) (31.75) 0.91 (3.40) (3.80) (19.00) (13.74) (35.00) 1.00 (5.40) (8.5) (3.80) (19.00) (41.5) 1.5 (31.80) (31.75) ll dimensions in inches (millimeters in parenthesis) (3.80) (19.00) 11 or assistance in orth merica: sales@peigenesis.com

49 340 OI UI IZ 1 UI U II I OI UI II I I I (5.59) O (7.9) O (11.10) O (11.10) O (14.30) O (15.90) O (15.90) O (19.05) (15.90) (19.05) (15.90) (3.80) (19.05) (31.75) (3.80) (34.9) (31.75) UIO UI or use with style- cable clamps and I/ style-/ endbells to resist dust, dirt and oil. ushings can be nested, one inside the other, to reduce the inside diameter and form a better seal against the cable jacket. ach bushing will accept the next smallest bushing O I/ I I or use with cable clamps (style-) to reduce the wire sealing diameter. ushings can be nested, one inside the other, to progressively reduce the inside diameter of the cable clamp. he column labeled re duction bushings shows the acceptable nesting options for each clamp waterproof cable clamp with mechanical strain relief. n internal neoprene gland seal bushing and compression washer will seal a broad range of round cable diameters, as listed below. X. O I. O IZ U I (mm) I (mm) (5.55) 0.00 (0.51) 5/8-4 U (5.55) 0.00 (0.51) 3/4-0 U (8.73) (4.47) 3/4-0 U 16/ (5.55) 0.00 (0.51) 7/8-0 U 16/ (8.73) (4.47) 7/8-0 U 16/ (11.1) (4.50) 7/8-0 U (8.73) (4.47) 1-0 U (11.1) (4.50) 1-0 U (14.9) 0.9 (7.4) 1-0 U 0/ (11.1) (4.50) 1-3/16-18 U 0/ (14.9) 0.9 (7.4) 1-3/16-18 U 0/ (17.46) (9.40) 1-3/16-18 U 4/ (14.9) 0.9 (7.4) 1-7/16-18 U 4/ (17.46) (9.40) 1-7/16-18 U 4/ (1.43) (13.61) 1-7/16-18 U (6.19) (14.99) 1-3/4-18 U (1.43) (13.61) -18 U ll dimensions in inches (millimeters in parenthesis) or assistance in urope and hina, please see the back cover for a complete listing of our branch offices and contact numbers. pecifications subject to change. 113

50 O I/ I I IZ OI ynthetic rubber gaskets are used to ensure a moisture-tight seal between a receptacle and the panel. askets are available for front or rear-panel mounting of styles 0,, 0, 30 and connectors. asket thickness is approximately.031 inches (1 mm), for nonconductive and low-temperature types. onductive shielding gaskets contain an embedded metal screen for I/I shielding in addition to moisture sealing. askets are available for front or rear-panel mounting of styles 30 and connectors. asket thickness is.00 inches (.5 mm). O-OUIV O OU OUIV OW-U OU O-OUIV U WI I etal dust caps are used to protect the contacts when the connectors are left unmated. ust caps come with metal chain lanyards. ummy eceptacles are for front or rear-panel mounting. I/ eries connectors have bayonet ramps. he center of the connector is closed. ummy receptacles mount on the same centers and have the same outside dimensions as a Y receptacle. version with a clearance hole through the middle of the connector is also available. ontact us for ordering information. U U UY U I 1,8 ±0, 9 IZ 3 ±0, * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *elect code for plating: Z = lack anodize 3 = Olive drab cadmium plate 9 = Olive drab cadmium nickel base = lectroless nickel U = reen zinc Y = lack alloy 114 or assistance in orth merica: sales@peigenesis.com

51 O O 1: lide the rear accessories over the wire bundle in the proper sequence for re-assembly: cable clamp and/or endbell first, then ferrule and (if used) coupling nut. : Insert individual wires through the proper holes in the grommet. Use isopropyl alcohol as a lubricant. I OO OIO 3: older wires to appropriate contacts on the rear of the connector. Information on standard soldering practices is available upon request. lease contact us. Y IUIO 4: ixture the connector for reassembly using the endbell assembly tools on apage 1 5: lide the grommet down the wires (lubricating the grommet with isopropyl alcohol will help). 6: ill all unused grommet cavities with a wire hole filler to maintain the sealing integrity of the connector. OO OO OO O 7: lide coupling nut, ferrule, and endbell accessories over rear of the connector and tighten. or tooling, a see page 1. O: and-crimp tools can be used with size 16, 16 & 1 contacts. ize 8, 4 and 0 contacts require the use of air-powered crimp tools. ontact us for assistance in the use of these tools. OO I OO O I/ I I IX U 1: trip the wires to the appropriate length. ee strip lengths on the ontact election uide,asee page 94. : Open the crimp tool by squeezing the handles. ush the latch on the turret to pop up the locator. ttach the turret to the crimp tool using the two captive hex bolts in the turret. 3: elect the proper locator position for your contact by rotating the locator until the proper color is aligned with the index mark. ush locator back down until it snaps into position. O IZ 16 I OO OO ed O OO OO ed 16 lue reen 1 reen reen I O I 4: djust dial for proper wire gauge. o change the dial setting, remove the lock pin and lift center of dial. urn to the desired wire gauge. eplace lock pin on dial. 5: ycle the tool before inserting the contact to be sure the tool is in the open position. rop the contact, mating end first, into the crimp cavity of the tool. queeze the tool handle just enough to grip the contact without actually crimping it. 6: Insert the stripped wire into the contact with a slight twisting motion. e sure all wire strands are inside the contact. queeze the handle to cycle the tool. he handle will not release until the contact is completely crimped. or assistance in urope and hina, please see the back cover for a complete listing of our branch offices and contact numbers. pecifications subject to change. 115

52 O I/ I I I OO OIO (OIU) I O U OUO I VII OU WI IIO O WI IUIO OU U I O O. 7: emove the crimped contact. ull on the wire slightly to be sure it is properly crimped. e sure the contact is not bent or damaged in any way. Visually inspect the crimp. IO-IO: nlargement of micro-section permits a final inspection of crimp quality. his test is recommended whenever new tools or new types of wire or contacts are used. IIO O O Y IUIO UI (IO) I IIO OO I I Initial minimum pullout force in lbs. (before conditioning) IZ WI U OU 1: lide the rear accessories over the wire bundle in the proper sequence for re-assembly: cable clamp and/or endbell first, then ferrule, and coupling nut. : Use the proper insertion tool from the ontact election hart on apage 94 lace the contact in the tool. he tool should press against the shoulder of the contact. ontact sizes 16, 16, and 1 use a pliers-style tool. ontact sizes 8, 4 and 0 use a tool with a -shaped shaft. 3: ubricate the grommet with isopropyl alcohol (do not use any lubricant other than isopropyl alcohol). Insert the contact through the appropriate cavity in the grommet. izes 16, 16 and 1 socket contacts must be installed using guide (pilot) pins. ee the ontact election uide on apage 94 for Insertion uide (ilot) in part numbers. OO Y IXU 4: lace the connector into an assembly fixture (fixtures are available for production use, contact us.) If you are not using a fixture, be sure to allow clearance on the mating face of the connector for the guide pins to come through the connector during insertion. 5: ubricate the contact cavities of the connector insulator with isopropyl alcohol (do not use any other type of lubricant). 6: Using guide pins where necessary, push straight down with a firm even pressure until the contact snaps into position in the proper cavity. tart at the center of the pattern and work toward the outer edges. 116 or assistance in orth merica: sales@peigenesis.com

53 IIO O O (OIU) UI O 7: ill any unused cavities with contacts. XIO O O Y IUIO 8: heck the mating face of the connector to ensure that all the same size contacts are on the same plane (fully inserted). If not, the contact is not fully inserted. emove the contact using the proper extraction tool and procedure and reinsert. o not attempt to reinsert the insertion tool to correct the problem. 9: wire hole filler must be inserted into the grommet behind the unused contacts to maintain the sealing integrity of the connector. ee the ontact election hart on apage 94 for wire hole fillers. 10: lace the connector back in the fixture for re-assembly. lide the connector accessories back down the cable over the rear of the connector and tighten. Use the appropriate endbell tools as shown on apage O I/ I I O XIO O W I O I I XIO 1: emove the endbell accessories and slide them back over the wires. Use the appropriate endbell tools as shown on apage 1. : Use the proper extraction tool from the ontact election hart on apage 94. he extraction tool can be used for both pin and socket contacts by removing the shaft from the handle and reversing it for pin or socket extraction. O IO O OO O IO O OO I O O O 3: On the mating face of the connector, insert the tool over the pin contact or into the socket contact until the tool bottoms. pply a slow continuous pressure to push the contact out the rear of the connector. When the shoulder of the tool thunks against the insulator, the contact is extracted. 4: arefully remove the extraction tool from the connector to avoid damage to the insulator. or assistance in urope and hina, please see the back cover for a complete listing of our branch offices and contact numbers. pecifications subject to change. 117

54 O I/ I I I/ I OO I ircular connectors with bayonet coupling O Y/I = rimp = older Y = rimp with Viton * Y = older with Viton * = rimp with low-smoke/flameretardant inserts = older with low-smoke/flameretardant inserts Y 00 Wall-mount receptacle 01 Inline receptacle 0 ox-mount receptacle 00 ox-mount receptacle with accessory threads 030 quare flange receptacle - rear panel mount (most popular) 05 ummy receptacle 06 traight plug (most popular) 06 traight plug with deep-serrated coupling nut 064 anel-mounted plug with heavy-duty coupling nut 065 traight plug with long heavy-duty coupling nut 07 am nut receptacle - rear panel mount 070 am nut receptacle with accessory threads angle plug hru-bulkhead IIY WI II O OO Y /06/064/065 07/ O OW-O-O UI W- (00) WI Y 06/06/064/065/08 06/06/064/065/08 06/06/064/065/08 06/06/064/065/08 06/06/064/065/08 00/01/0/00/03/030/05/070/ 06/06/064/065/08 00/01/0/00/03/030/05/070/ 06/06/064/065/08 *Viton is a registered trademark of uont OW lastomers OO VIIO Omit for standard olive drab with silver plated contacts 96 lack anodized 014 Olive drab cadmium plate, nickel base 4 old/nickel-plated contacts 03 lectroless nickel (o with crimp only) 05 lack alloy (o with crimp only) 07 onductive black alloy (o with crimp only) 04 reen zinc 30 old adsok power contacts 8, 4 & 0 socket contact only 116 ess pre-tinned solder cups & 05 mod codes (o) & 03 mod codes (o) & 07 mod codes (o) I OIO W, X, Y, and Z designate that the insert is rotated in its shell from a normal position. o letter required for normal (no rotation) position. ee apages O Y pin contacts socket contacts IZ & YOU ee apages 7-8. OO eneral-duty, threaded backshell, no cable clamp, no grommet eneral-duty, threaded backshell, cable clamp, no grommet eneral-duty, threaded backshell, cable clamp, with grommet eneral-duty, threaded endbell, gland-seal cable clamp, no grommet Z eneral-duty, threaded endbell, gland-seal cable clamp, with grommet One-piece, heat shrink endbell adaptor, with grommet (use with heat shrink boot see ccessories). apages wo-piece, heat shrink endbell adaptor, with grommet (use with heat shrink boot see ccessories). apages ong-threaded backshell, gland-seal cable clamp, with grommet, and basket-weave cord grip (please call with cable O..) ong-threaded endbell, gland-seal cable clamp, no grommet Z ong-threaded endbell, gland-seal cable clamp, with grommet eneral-duty, threaded backshell, no cable clamp, V with grommet eneral-duty, short backshell, with grommet (may be used with heat shrink boot see ccessories). apages eneral-duty, threaded endbell, gland-seal cable clamp, no grommet, rubber-covered coupling nut (shell styles 06 and 08 only) anel plug, only for shell styles 06 and 064 ong back shell for metal core conduit, with grommet (please call with conduit O..) or plastic, flexible conduit (please call with conduit O..) asee pages 496 ong backshell for use with gland-seal style cord grip (please call with cable O..) 118 or assistance in orth merica: sales@peigenesis.com

55 I/- I OO I ircular onnector amily Y Wall-mount receptacle with rear accessory threads for front mounting through holes in flange able-connecting receptacle with rear accessory threads ront-mount box receptacle no rear accessory threads through holes in flange ear-mount box receptacle with rear accessory threads through holes in flange lug straight am nut receptacle rear mount, no rear accessory threads lug with 90 degree endbell OO nvironmental with resilient insulator and endbell with clamp and bushing nvironmental with resilient insulator and endbell with rear accessory threads wo-piece backshell for heat shrink boots nvironmental with resilient insulator and shortened lightweight endbell without cable clamp IZ 10, 14, 16, 16, 18, 0,, 4, 8, 3, and 36 O OW-O-O UI o more easily illustrate ordering procedure, part number X-80 is shown as follows: X - 80 OO OIIIO 01 - etric crimp contacts ess solder filled contacts 80 - W crimp contacts old-plated contacts 3 - lectroless nickel plating shells 3 - lack zinc cobalt-plated shells 4 - ess grommet, endbell & sleeve (ferrule) 0 - ess contacts (ordered separately) I - rounding spring on barrel (3106 & 3108) 00 - etric threaded holes in flange (3100, 310, 3103 only) ontact us for other modifications V YO OUI OIO W, X, Y, and Z o suffix required for normal position aee pages for valid alternate insert position (rotation) O Y - in - ocket OO aee pages 7-8 for layouts by number of contacts O I/ I I IIY WI II O OO Y WI Y 3106/ / / / / / 310/ / 310/ 3103 Use the I/ eries part numbering system on apages whenever possible. or assistance in urope and hina, please see the back cover for a complete listing of our branch offices and contact numbers. pecifications subject to change. 119

56 O I/ I I V9534 O IIIO V IX Y ee chart below IZ - YOU a ee pages 7-8. O Y = in contacts = ocket contacts IIO 1 = W crimp lank = metric crimp OIZIO a ee pages O OW O O UI V Y ates with U 1 1 traight plug with cable clamp ight angle plug with cable clamp ight angle plug for conduit termination traight plug with heat shrink endbell traight plug for conduit termination ight angle plug for conduit termination with grounding fingers traight plug for conduit termination with grounding fingers traight plug with shielded heat shrink endbell and grounding fingers traight plug with shielded heat shrink endbell and grounding fingers traight plug with heat shrink endbell and grounding fingers ront panel mount box receptacle 1 ear panel mount box receptacle, metric mounting holes ear panel mount box receptacle, through mounting holes In-line receptacle with cable clamp 1 ear panel mount wall receptacle with cable clamp, metric mounting holes ear panel mount wall receptacle with cable clamp, through mounting holes 1 ear panel mount wall receptacle with shielded heat shrink endbell, metric mounting holes ear panel mount wall receptacle with shielded heat shrink endbell, through mounting holes 1 ear panel mount wall receptacle with heat shrink endbell, metric mounting holes ear panel mount wall receptacle with heat shrink endbell, through mounting holes U1 ear panel mount wall receptacle with heat shrink endbell, metric mounting holes U ear panel mount wall receptacle with heat shrink endbell, through mounting holes V In-ine receptacle with conduit termination 10 or assistance in orth merica: sales@peigenesis.com

57 O OW O O UI V9534 Y V9534 Y V9534 Y 1/ V9534 Y V9534 Y V9534 Y V9534 Y V9534 Y V9534 Y 1/ O I/ I I V9534 Y V9534 Y V9534 Y V9534 Y 1/ V9534 Y 1 V9534 Y 1/ V9534 Y V9534 Y U1/U or assistance in urope and hina, please see the back cover for a complete listing of our branch offices and contact numbers. pecifications subject to change. 11

58 O I/ I I W he strap wrench is used to connect or disconnect coupling nuts in a confined space, or to tighten or loosen endbells without damaging the connector plating. strap wrench also increases torque, allowing you to more easily mate or unmate a connector pair. ubstitute tools, such as a pipe wrench or pliers, should never be used because of the high probability of severe damage to the connector plating or the coupling mechanism. OO OO he 600 eries is a complete system for the proper assembly and torquing of connector endbells. he system includes a bench-mounted or hand-held torque wrench, plug and receptacle holders, and a range of endbell tightening tools. When used together, these tools provide the user with consistent endbell installations. ach item is shipped with detailed assembly instructions. 69 O-I U I O I VI he 69 pliers have resilient jaws and are used to tighten or remove endbells without damaging the connector plating. he pliers are adjustable and will accommodate all of the connector sizes in this catalog. ubstitute tools, such as a pipe wrench or metal jaw pliers, should never be used due to the high probability of severe damage to the connector plating. eplacement jaws, art o , are available. lug and eceptacle olders ench-mounted torque wrench and-held torque wrench IZ I O I/ & I/ U 8/ / / / / OQU VU IO O: If barrel/shell has three threads or less, torque to 30 to 35 inch/bs (3.4 to 4.0 ) per IZ I./. X OIO I O W = W = X = I X = Y = Y = Z = Z = 1 or assistance in orth merica: sales@peigenesis.com