MR certified. iq Series, Ultra Low ESR, NP0. RF & Microwave Capacitors, RoHS Compliant DESCRIPTION APPLICATIONS CIRCUIT APPLICATIONS
|
|
|
- Abel Ross
- 6 years ago
- Views:
Transcription
1 R & Microwave Capacitors, Ro Compliant DECRIPIO owest ER in class ighest working voltage in class - 500V tandard EI sizes aser Marked (optional) igh elf Resonance requencies PPICIO Cellular ase tation Equipment roadband Wireless ervice Point to Point/Multipoint Radios R Generators (MR...) I. EECRIC PECIICIO Parameter Capacitance olerances Working Voltage (WVDC) emperature Coefficient Insulation Resistance Dielectric Withstanding (test voltage applied for 5 seconds) ging Piezo Effects II. MECIC PECIICIO CIRCUI PPICIO ilter etworks Matching etworks uning, Coupling and DC locking Value 0.2 to 1'000 p,, C, D below 10 p, G, J, K above 10 p see Capacitance Value chart 0 +/-30ppm/ C, -55 C to +125 C 10 5 MΩ min 2.5 x WVDC for WVDC 500V none none Parameter Value Comment Case ize or each case size, the recommended terminations are listed below. : - all the terminations are backward compatible and lead-free MR certified - the non-magnetic terminations are all Magnetism-free Rated. IR ree 1
2 R & Microwave Capacitors, Ro Compliant ermination ype Code - - tandard (tin-plated nickel) VIE VIE VIE VIE on-magnetic (silver-palladium) VIE (3) on-magnetic (tin-plated copper) C VIE (1) VIE (2) (1): a separate data-sheet is available regarding 0603 size with copper terminations (non-magnetic), please consult factory. (2): range up to 330p only. or higher capacitance values, please consult factory. (3): range up to 150p only. or higher capacitance values, please consult factory. III. OUIE DIMEIO Parameter ength () Width (W) hickness () End-and (e) (0402) 1.00 mm 0.25 (0505) mm 0.25 W (0603) mm 0.35 ±0.20mm e (0805) mm ±0.30mm (1206) mm (1210) mm (1111) 2.80 ±0.40mm 2.80 ±0.40mm 2.60 mm
3 R & Microwave Capacitors, Ro Compliant IV. EVIROME PECIICIO Parameter ife est Moisture Resistance est 1 Moisture Resistance est 2 Value 1'000 hours, +125 C at 2.0 x WVDC 240 hours, 85% relative humidity at +85 C (E/CC n 3009) 56 days, 93% relative humidity at +40 C 0V, 5V, WVDC V. OW O ORDER J E voltage dielectric case size capacitance tolerance please refer to Volt.Code given in Capacitance Values chart 250=25V 500=50V 101=100V 151=150V 201=200V 251=250V 501=500V please refer to Cap. Code given in Capacitance Values chart =±0.05p =±0.1p C=±0.25p D=±0.5p =±1% G=±2% J=±5% K=±10% termination please refer to Mechanical pecification chart mechanical please refer to Mechanical Configuration chart leave blank if no mechanical requested marking means laser marking required leave blank if no marking requested tape and reel E means tape and reel required leave blank if no tape and reel requested RO the Ro tag is not part of the reference tag added at the end of P/ for information : - for capacitance values lower than 10p, tolerances, C and D apply. or capacitance values equal to or higher than 10p, tolerances, G, J and K apply. lso, the tolerance is only available up to 2p inclusive (please consult us for specific requirements). - marking is only available on and case sizes. VI. PE D REE he following chart gives the number of components per reel. Parts per Reel
4 R & Microwave Capacitors, Ro Compliant VII. CPCICE VUE Value (p) Cap. Code 0.2 0R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R (0402) 50V 25V (0505) 250V 150V (0603) 250V (0805) 250V (1206) 500V 200V 100V (1210) 500V 200V 100V (1111) 500V 200V 100V 50V : special values, tolerances, higher WVDC and matching available, please consult factory. 4
5 R & Microwave Capacitors, Ro Compliant VIII. MECIC COIGURIO VIII.1. ead/ribbon and Wire ypes ermination ype Code Description 1 Micro-strip Ribbon : when coding ribbons or wires, for the designation of the part, the termination has to be mentioned for MR certified types to make sure only non-magnetic materials are used. Examples : J1 any termination material could be used JC1 only non-magnetic termination materials could be used VIII.2. ead/ribbon and Wire Matrix ermination ype Code // // Micro-strip Ribbon 1 VIE VIII.3. ead/ribbon and Wire Dimensions Within each cell, first the length and then the width/diameter of any single ribbon or wire are given. ermination ype Code Micro-strip Ribbon 1 : dimensions are in mm, length is the minimum value. // //
6 R & Microwave Capacitors, Ro Compliant IX. YPIC PERORMCE D IX.1. CPCICE I IZE (0505): UPER-IQ ERIE - ER vs requency 1.00 ER (Ohm) requency (Mz) 10p 56p 68 p IX.2. CPCICE I IZE (1111): UPER-IQ ERIE - ER vs requency 1.00 ER (Ohm) requency (Mz) 10 p 27 p 33 p 6
7 R & Microwave Capacitors, Ro Compliant IX.3. CPCICE I IZE (0603): UPER-IQ ERIE eries - ER vs requency ER (Ohm) Q actor requency (Mz) 0.5p 3.3p 10p 15p 33p 47p 100p eries - Q actor vs requency requency (Mz) 0.5p 3.3p 10p 15p 33p 47p 100p 7
CL - High Power, High Q, NP0, RoHS
DSCRIPTION Low SR/SL NP0 Porcelain Capacitors xcellent characteristics in current, voltage and power with high Q factor Highest working voltage in class 7 000V APPLICATIONS RF Power Amplifiers Industrial
CL - High Power, High Q, NP0, RoHS
DSCRIPTION Low SR/SL NP0 Porcelain Capacitors xcellent characteristics in current, voltage and power with high Q factor Highest working voltage in class 7 000V APPLICATIONS RF Power Amplifiers Industrial
ATC 800 A Series NPO Ceramic, High RF Power Ultra-Low ESR Multilayer Capacitors
C 800 Series NPO Ceramic, High RF Power Ultra-ow ESR Multilayer Capacitors Case Size Capacitance Range ( x ) 0.1 pf to pf Rugged, reliable owest ESR NPO dielectric Capable of highest Case optimized for
LaserTrim Ceramic Chip Capacitor
DESCRIPTION Laser adjustable monolithic ceramic Rated voltage - 50V Porcelain Capacitors Excellent post-trim Q and ESR No capacitance drift APPLICATIONS Pagers, RF Modems Cellular Communications Remote
ATC 700 B Series NPO Porcelain and Ceramic Multilayer Capacitors
ATC 700 Series NPO Porcelain and Ceramic Multilayer Capacitors Case Size Capacitance Range (.1" x.1") 0.1 pf to 5 pf Low ESR/ESL Zero TCC Low Noise High Self-Resonance Rugged Construction Established Reliability
LaserTrim Ceramic Chip Capacitor
DESCRIPTION Laser adjustable monolithic ceramic Rated voltage - 50V Porcelain Capacitors Excellent post-trim Q and ESR No capacitance drift APPLICATIONS Pagers, RF Modems Cellular Communications Remote
HIGH VOLTAGE MULTILAYER CERAMIC CAPACITORS
DESCRIPTION: RoHS compliant (*) Capacitors 0805 to 6560 Rated voltage 1000V to 10KV Dielectric Type I and II SMD and leaded versions * Non RoHS version still maintained for current applications. I. Foreword
GENERAL PURPOSE CAPACITORS
AMERICAN TECHNICAL CERAMICS GENERAL PURPOSE CAPACITORS Low Cost Multilayer Ceramic Capacitors For Surface Mount Applications Manufactured for ATC ISO 9001 REGISTERED COMPANY ATC 001-847, Rev. AA; 5/18
Hi-Q High RF Power MLC Surface Mount Capacitors
For 00V to 7200V pplications PRODUC OFFERING Hi-, high RF power, surface mount MC capacitors from VX Corporation are characterized with ultra-low ESR and dissipation factor at high frequencies. hey are
ATC 200 A Series BX Ceramic Multilayer Capacitors
200 A Series BX Ceramic Multilayer Capacitors Case A Size Capacitance Range (.055" x.055") 5 pf to 0.01 µf Low ESR/ESL Mid-K Rugged High Reliability Construction Extended VDC Available, the industry leader,
Cap. pf R R R R Rated WVDC 2.2 2R R R A,B, 0.5 0R5 3.
0201N (.020" x.010") 0201N Capacitance & Rated Voltage Table Cap. pf 0.1 0R1 Tol. Rated WVDC Cap. pf 2.2 2R2 Remark: special capacitance, tolerance and WVDC are available, consult with PASSIVE PLUS. Tol.
UHF/RF High-Q Ceramic Capacitors (Available in Non-Magnetic) C (.600" x.400") C (.760" x.760") C (1.30" x 1.
0505 1111 2225 3838 0201 0402 0603 0805 6040 7676 1313 01005 0201 0402 0603 0805 www.passiveplus.com New State-of-the-Art Manufacturing Facility over 130,000 square feet of NEW manufacturing area. Established
2.0 2R0. F,G, 0.6 0R R0 Code J,K 0.7 0R R R2 Code 5.1 5R1 Code A,B,C
0402N (.040" x.020") EIA Low ESR Microwave Capacits 0402N (.040" x.020") 0402N Capacitance & Rated Voltage Table Cap. pf Tol. Rated WVDC Cap. pf Tol. Rated WVDC 0.1 0R1 2.0 2R0 10 100 0.2 0.3 0.4 0.5 0R2
2225C/P (.220 x.250 )
/P (.220 x.250 ) /P (.220 x.250 ) Product Features High Q, High RF Current/Voltage, High RF Power, Low ESR/ESL, Ultra-Stable Perfmance. Product Application Typical Functional Applications: Bypass, Coupling,
4 400 VDC 2W 450 VDC VDC H ±3 % J ±5 % 40 C to +105 C (450 VDC, 1.1 uf or more 40 C to +85 C) 400 VDC, 450 VDC, 630 VDC 400 VDC 450 VDC
Metallized Polypropylene ilm Capacitor Type: ECW(L) Designed for high frequency and current applications. eatures mall size Excellent frequency characteristics Low loss 85 C, 85 % RH, W.V. for hours RoH
High Voltage Ceramic Capacitors (HVC Series)
Features: RoHS Compliant and Halogen Free Capacitance range: 0.5pF to 2.2uF Voltage range: 200V to 5000V Ceramic monolithic structure provides excellent reliability High-speed automated placement capabilities
CHIP TRIM CERAMIC TRIMMER CAPACITORS AT 0300 RoHS & AT 1300 RoHS
AT 0300 & AT 1300 SURFACE MOUNT TRIMMER CAPACITORS, COMPLIANT Description Very compact package type Ceramic dielectric Special design for reflow soldering use Rated voltage 100 VDC Low temperature coefficient
Ceramic Chip Capacitors
Introduction RGA Multilayer Ceramic Capacitors are constructed by screen printing alternative layers of internal metallic electrodes onto ceramic dielectric materials and firing into a concrete monolithic
MULTI-LAYER HIGH-Q CAPACITORS
MULTI-LAYER HIGH- CAPACITORS These lines of multilayer capacitors have been developed for High- and microwave applications. The S-Series (R03S, R07S, R4S, R5S) capacitors give an ultra-high performance,
ATC 800 C Series NPO Ceramic High RF Power Multilayer Capacitors
A 800 Series NPO eramic High RF Power Multilayer apacitors ase Size apacitance Range: (.250 x.250 ) 2.2 pf to 3000 pf High Q Ultra-Stable Performance ow ESR/ES High RF urrent/voltage High RF Power High
0603N Capacitance & Rated Voltage Table
0603N (.060" x.030") 0603N (.060" x.030") 0603N Capacitance & Rated Voltage Table Cap. pf 0.1 0R1 Tol. Rated WVDC Cap. pf 2.2 2R2 Tol. Rated WVDC 0.5 0R5 3.3 3R3 A,B, 24 240 0.6 0R6 3.6 3R6 C,D 27 270
Cap. pf WVDC V 0.3 0R R R R R R R R V
1111N (.110 x.110 ) EIA Low ESR Microwave Capacitors 1111N (.110" x.110") 1111N Capacitance & Rated oltage Table WDC WDC WDC WDC 0.2 0R2 3.0 3R0 27 270 220 221 0.3 0R3 3.3 3R3 30 300 240 241 0.4 0R4 3.6
Multilayer Ceramic Capacitors Y5V
Multilayer Ceramic Capacitors Features Miniature size Wide capacitance, TC, voltage and tolerance range Industry standard sizes Available for wave, reflow or vapor phase solder How to Order 0805 F 104
ATC 100 A Series Porcelain Superchip Multilayer Capacitors
00 Series Porcelain Superchip Multilayer Capacitors Case Size Capacitance Range (" x ") 0. pf to 00 pf High Q Ultra-Stable Performance Low ESR/ESL High Self-Resonance Low Noise Established Reliability
UPDATE. Summary of Specifications
UPDAE oroidal Design Screw Mount Lowest hermal Resistance Optimum Cooling Capability New Lower Profile s New eat Sink Mounting Kit RoS Compliant he series available in low profile sizes offers high capacitance
/ NTSSeries NTFSeries Temperature cycle : 1000 cycles
/ NTSSeries NTFSeries Temperature cycle : 00 cycles FEATURES 1. Large capacitance by small size. 2. Excellent noise absorption. 3. High permissible ripple current capability. 4. NTF: Temperature cycle
Type 225P. Vishay Sprague Polyester Capacitors Filmite "E", ORANGE DROP, Radial Lead
Vishay prague Polyester Capacitors Filmite "E", ORANGE DROP, Radial ead PERFORMANCE CHARACERIIC Operating emperature: - 55 C to + 85 C. o + 105 C when working voltage is reduced to 70% of + 85 C rating;
MULTILAYER CERAMIC CAPACITORS High Q / Low ESR Series (HH)
. INTRODUCTION MLCC consists of a conducting material and electrodes. To manufacture a chip-type MT and achieve miniaturization, high density and high efficiency, ceramic condensers are used. WTC HH series
30±5 0.6ø. Rated (pf) Capacitance First 2 significant figures followed by number of zero's i.e. above = 100(pF) Tolerance Code
CERAMIC DISC WDC/WDK/WD Class 1, Class 2 and Class 3 devices Various pitch and lead type options Epoxy coating for 2KV Our ceramic-disc range offers both close-tolerance class 1 parts, and high capacity
ATC 900 C Series X7R Ceramic RF Power Multilayer Capacitors
AT 900 Series X7R eramic RF Power Multilayer apacitors ase Size apacitance Range (.250" x.250") 0.01 µf to 1 µf Low ESR/ESL Mid-K Rugged onstruction High Reliability Available with Encapsulation Option*
ATC 100 A Series Porcelain Superchip Multilayer Capacitors
0 Series Porcelain Superchip Multilayer Capacitors Case Size Capacitance Range (" x ") pf to 0 pf High Q Low ESR/ESL Low Noise Ultra-Stable Performance High Self-Resonance Established Reliability (QPL),
Non Magnetic Chip C0G & X7R
Non Magnetic Chip CG & X7R This range of MLC chip capacitors that are completely non magnetic. They are designed to operate in non magnetic environments such as Magnetic Resonance Imaging (MRI) and Nuclear
Multilayer Ceramic Capacitors Leaded Capacitors. Packaging. Internal coding. Capacitance tolerance
Leaded Capacitors Leaded Ordering code system B37979N 1 100 K 0 54 Packaging 51 ^ cardboard tape, reel packing (360-mm reel) 54 ^ Ammo packing (standard) 00 ^ bulk Internal coding Capacitance tolerance
4 400 VDC VDC H ±3 % J ±5 % 40 C to +105 C 400 VDC, 630 VDC
Plastic Film Capacitors Metallized Polypropylene Film Capacitor Type: ECWF(L) Designed for high frequency and current applications. Features Small size Excellent frequency characteristics Low loss 8 C,
AFM MICROELECTRONICS INC
AFM MICROELECTRONICS INC Ceramic Capacitors: High Q High RF Power High Temperature High Voltage Product WWW.AFMMICROELECTRONICS.COM Contents Company Overview 4 Product Overveiw 5 High Frequency Capacitors
Multilayer Ceramic Capacitors X7R
Features Miniature size Wide capacitance, TC, voltage and tolerance range Industry standard sizes Available for wave, reflow or vapor phase solder How to Order 0805 104 K 500 N T A C D E F G A C Size Code
CERAMIC COAXIAL RESONATORS
CONTENTS PAGE GENERAL CHARACTERISTICS........................................................... 38 HOW TO ORDER?.......................................................................... 40 APPLICATION
High Voltage MLC Chips
NEW 630V RANGE HOW TO ORDER 1808 A A 271 High value, low leakage and small size are difficult parameters to obtain in capacitors for high voltage systems. AVX special high voltage MLC chip capacitors meet
Discoidal Capacitors. Multilayer Discoidal
Discoidal Capacitors Ceramic discoidal feed-through capacitors are the building blocks of the EMI filter industry. API s Spectrum Control discoidal capacitors provide great versatility in meeting varied
Surface Mount Multilayer Ceramic Chip Capacitors DSCC Qualified Type 05007
Surface Mount Multilayer Ceramic Chip Capacitors DSCC Qualified Type 05007 FEATURES US defense supply center approved Federal stock control number, Available CAGE CODE 2770A Available Case size 1206 Stable
Commercial Radial Lead 50V to 5kV
Commercial Radial Lead V to kv Ro compliant interconnects, small case size, Radial Leaded Capacitors available in CG, and X8R dielectrics. The conformal coating and lead mounting style provide a rugged
MULTILAYER CERAMIC CAPACITORS
1. DESCRIPTION MLCC consists of a conducting material and electrodes. To manufacture a chip-type SMT and achieve miniaturization, high density and high efficiency, ceramic condensers are used. WTC s MT
Multilayer Ceramic Capacitors (For General Electronic Equipment)
Multilayer Ceramic Capacits (F General Electronic Equipment) Series: ECJ Multilayer Ceramic Capacits(F General Usage) Features Small size and wide capacitance range High humidity resistance and long life
Multilayer Ceramic Capacitors (For General Electronic Equipment)
Multilayer Ceramic Capacits (F General Electronic Equipment) Series: ECJ Multilayer Ceramic Capacits(F General Usage) Features Small size and wide capacitance range High humidity resistance and long life
Commercial Chip - R3L 16Vdc to 5kVdc
Commercial Chip - R3L 16Vdc to 5kVdc A range of commercial MLC chip capacitors in R3L dielectric. This is a Class I temperature compensating N22 dielectric with an energy density that exceeds conventional
Operating temperature Maximum C/C over temperature range without DC voltage applied
Planar Arrays General characteristics BPM Series FEATURES Planar capacitor arrays X7R dielectrics (NPO available on request) Capacitance range: 330pF - 68nF Voltage range: 5V DC to 00V DC Specific configurations
0805 CG 102 J 500 N T
NPO/COG for General-use is class I high frequency capacitor, its capacitance is very stable, almost will not change along with the temperature, voltage and time. Specially be suitable for high frequency
CERAMIC CHIP CAPACITORS
INTRODUCTION Ceramic chips consist of formulated ceramic dielectric materials which have been fabricated into thin layers, interspersed with metal electrodes alternately exposed on opposite edges of the
Capacitance Cap. Tol. Suffix construction. Rated voltage 450 VDC
Metallized Polypropylene Film Capacitors Type:ECWFD Plastic Film Capacitors Non-inductive construction using metalized Polypropylene film with flame retardant epoxy resin coating. Features Small size Excellent
ATC 900 C Series X7R Ceramic RF Power Multilayer Capacitors
A 900 Series X7R eramic RF Power Multilayer apacitors ase Size apacitance Range (.250" x.250") 0.01 µf to 1 µf ow ESR/ES Mid-K Rugged onstruction High Reliability Available with Encapsulation Option* A,
CERAMIC CHIP CAPACITORS
Example below indicates : SNPO series, 470 pf, 5%, 50 Volt, Tape/Reel packed, 0805 case size. (EXAMPLE) S N P O 4 7 1 J 0 5 0 T 2 Series Series Code: SNPO, SX7R, SZ5U, SY5V. Note: SNPO indicates COG(NPO)
SURFACE MOUNT MONOLITHIC CHIP CAPACITORS COG AND TEMPERATURE COMPENSATING TYPES GRM36/39/40/42-6/42-2/43-2/44-1 Series
COG AND TEMPERATURE COMPENSATING TYPES GRM36/39/40/42-6/42-2/43-2/44-1 Series FEATURES Miniature size No Polarity Nickel Barrier Termination Standard highly resistant to metal migration Uniform dimensions
High Voltage MLC Chips
HOW TO ORDER NEW 630V RANGE 1808 A A 271 K AVX Voltage Temperature Capacitance Code Capacitance Style 600V/630V = C Coefficient (2 significant digits Tolerance 0805 1000V = A NPO (C0G) = A + no. of zeros)
Multilayer Ceramic Chip Capacitors
SELECTION OF CERAMIC CHIP CAPACITORS JARO Multilayer Ceramic Chip Capacitors offer the most complete range of characteristics and configurations available in the industry. We suggest your selection of
Multi Layer Ceramic Capacitor
Description MLCC consists of a conducting material and electrodes. To manufacture a chip-type SMT and achieve miniaturization, high density and high efficiency, ceramic condensers are used. POE s MLCC
EDCON-COMPONENTS DATA SHEET. MLCC Chip Capacitor Size 2225 Serie: I X7R= X7R Material 100= 10Volt 102= 1000pf. Material: Voltage: Range:
DATA SHEET Serie: Mat. Code X7R Voltage Code 100 Range Code 102 Material: Voltage: Range: X7R= X7R Material 100= 10Volt 102= 1000pf Serie No.: APPD: Schumi FINISH Jamy Sheet No. 1 from 14 Customer: Structure
FEATURES APPLICATIONS DESCRIPTION QUICK REFERENCE DATA. PILKOR components
FEATURES Excellent anti-surge characteristics Stable characteristics to moisture resistance even in high resistance range. Good replacement for ceramic plate resistors. APPLICATIONS Telecommunication Industrial
A KYOCERA GROUP COMPANY. AVX Surface Mount Ceramic Capacitor Products
KYOCER GROUP COMPNY VX Surface Mount Ceramic Capacitor Products Ceramic Chip Capacitors able of Contents How to Order - VX Part Number Explanation............................................ 2-3 C0G (NP0)
2011 New Products of MLCC
2011 New Products of MLCC 1 SAFETY CERTIFIED CHIP CAPACITOR. The The safety safety capacitors capacitors offered offered by by are are designed designed for for surge surge or or lightning lightning immunity
Polyester Capacitors Filmite E, ORANGE DROP, Radial Lead
Polyester Capacitors Filmite E, ORANGE DROP, Radial ead PERFORMANCE CHARACTERITIC Operating Temperature: - 55 C to + 85 C To + 105 C when working voltage is reduced to 70 % of + 85 C rating; to + 125 C
0.3mm Pitch Connector for FPC. FF02S Series
COMPONENTS PRODUCT INFORMATION NEW 0.3mm Pitch Connector for FPC FF02S Series CONNECTOR MB-0146-2 July 2006 RoHS Compliant Outline The FF02S Series is a 0.3mm pitch low-profiled connector used for FPC
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, X7R
Product Specification May 26, 2015 V.12 DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, 6.3 V TO 50 V 100 pf to 22 µf RoHS compliant & Halogen Free Product
Prosperity Dielectrics Co., Ltd. 1 ACS-1045 Rev15
1. DESCRIPTION MLCC consists of a conducting material and electrodes. To manufacture a chip-type SMT and achieve miniaturization, high density and high efficiency, ceramic condensers are used. WTC high
MKP.g. 1.0 Rated Values and Operational Data
Applications DC and AC voltages Professional Applications Tuned circuits, filters, timers Integrators, S/H Coupling / decoupling, audio Instrumentation Main Characteristics Dry film-foil based technology
Maximum C/ C over temperature range without voltage. Temperature coefficient (0±30) ppm/ C ( 2,200±500) ppm/ C NA Aging None None 2.
Taping TCL / TCK : dimensions Series High Voltage Molded & Varnished Leaded Capacitors ESA Qualified According to (TCK) Available space ranges: consult our detail specifications ELECTRICAL SPECIFICATIONS
Surface Mount Multilayer Ceramic Chip Capacitors for Safety Certified Applications
Surface Mount Multilayer Ceramic Chip Capacitors for Safety Certified Applications FEATURES Approved IEC 60384-14 Specialty: safety certified capacitors Wet build process Reliable Noble Metal Electrode
Surface Mount Multilayer Ceramic Chip Capacitors Prohibit Surface Arc-Over in High-Voltage Applications
Surface Mount Multilayer Ceramic Chip Capacitors Prohibit Surface Arc-Over in High-Voltage Applications ELECTRICAL SPECIFICATIONS FEATURES For this Worldwide Patented Technology Specialty: high-voltage
Chip Type Y5U Temperature Characteristics
Chip Type Y5U Temperature Characteristics Features Dimensions Large capacitance in small size Temperature characteristics of Y5U (within +% to 56% in the range of 5 C to +85 C) Features equivalent to X7V.
MULTILAYER CERAMIC CAPACITORS Low Profile Series 0402 to 1210 Sizes X7R, X5R & Y5V Dielectrics Halogen Free & RoHS Compliance
MULILAYER CERAMIC CAPACIORS Low Profile Series 0402 to 1210 Sizes X7R, X5R & Y5V s Halogen Free & RoHS Compliance *Contents in this sheet are subject to change without prior notice. Page 1 of 9 ASC_ Low
DATA SHEET ARRAY CHIP RESISTORS YC/TC 164 (8Pin/4R; Pb Free) 5%, 1% sizes
DATA SHEET ARRAY CHIP RESISTORS 164 (Pin/4R; Pb Free) 5%, 1% sizes 4 0603 Supersedes Date of Mar. 06, 2003 2 SCOPE This specification describes YC164 (convex) and TC164 (concave) series chip resistor arrays
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, Y5V
Product Specification January 12, 2016 V.6 DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, 6.3 V TO 50 V 10 nf to 47 µf RoHS compliant & Halogen Free
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS. Mid-voltage NP0/X7R. Product Specification April 16, 2015 V.
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS Mid-voltage NP0/X7R 100 V TO 630 V 0.47 pf to 2.2 µf RoHS compliant & Halogen Free Product Specification April 16, 2015 V.15 Product specification
Stacked Metallized Film Capacitor
Stacked Metallized Film Capacitor Stacked Metallized Film Capacitor Type: ECQV Designed for application where high density insertion of components is required. Features High volumetric efficiency Excellent
AVX Multilayer Ceramic Chip Capacitor
AVX Multilayer Ceramic Chip Capacitor Ceramic Chip Capacitors Table of Contents Basic Capacitor Formulas............................................................. 2 How to Order - AVX Part Number Explanation..............................................
Microwave Multilayer SMD Ceramic Capacitor 0201 to 0805 Sizes (6.3V to 500V), NP0 Dielectric, (MCRF)Series
Description: MLCC consists of a conducting material and electrodes. To manufacture a chip-type SMT and achieve miniaturization, high density and high efficiency, ceramic condensers are used. WTC RF series
POE INTERNATIONAL CORPORATION. SPECIFICATION OF MULTI-LAYER RADIAL-LEADED TYPE CAPACITOR Ver: 8 Page: 1
SPECIFICATION OF MULTI-LAYER RADIAL-LEADED TYPE CAPACITOR Ver: 8 Page:. Scope: Its specification applies to Radial Series Ceramic Capacitor. 2.How to order: CODE: U RD2 R 02 K T Rated Voltage Code:U =
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose Class 1, NP0
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose Class 1, 16 V TO 50 V 0.22 pf to 33 nf RoHS compliant & Halogen Free Product Specification August 05, 2011 V.8 Product specification
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, X7R
Product Specification May 12, 17 V.18 DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, 6.3 V TO 50 V 100 pf to 22 µf RoHS compliant & Halogen Free Product
DATA SHEET. Radial series Leaded ceramic multilayer capacitors. BCE Sud Passive Components Oct 16
DATA SEET File under BCE Sud Passive Components, 2003 Oct 16 BCE Sud Passive Components A former part of Philips Components FEATURES Very high capacitance per unit volume Low cost. APPLICATIONS These conformally
*Contents in this sheet are subject to change without prior notice.
MULTILAYER CERAMIC CAPACITORS Soft Termination High Voltage Series (SH_200V to 3000V) NP0 & X7R Dielectrics 0603 to 1812 Sizes, 200V to 3000V Halogen Free & RoHS Compliance *Contents in this sheet are
CECC EIA Exxelia Temex Code Operating temperature range Storage temperature range Maximun C/ C over Temperature range without voltage applied Ageing
Taping SCT Series : dimensions High Temperature Stacked Capacitors FEATURES Multilayer stacked ceramic capacitors Dielectric type II Capacitance range: 47 nf to 390 µf Voltage range: 50 V DC to 500 V DC
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, X5R
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, 6.3 V TO 50 V 10 nf to 100 µf RoHS compliant Product Specification Product specification 2 Surface-Mount
NP0 Dielectric Non-Magnetic Multilayer Ceramic Capacitors C 0603 CG 101 J 500 P
EIA High Non-Magnetic Multilayer Ceramic Capacitors NP0 Dielectric Non-Magnetic Multilayer Ceramic Capacitors Product Features Non-Magnetism, Suitable for MRI Part Numbering C 0603 CG 101 J 500 P T 1 2
DATA SHEET. SURFACE MOUNT MULTILAYER CERAMIC CAPACITORS General purpose & High capacitance Class 2, X5R. 4 V TO 50 V 100 pf to 100 µf
Product Specification March 31, 2014 V.17 DATA SHEET SURFACE MOUNT MULTILAYER CERAMIC CAPACITORS General purpose & High capacitance Class 2, 4 V TO 50 V 100 pf to 100 µf RoHS compliant & Halogen free Product
Maximum C/ C over temp. range without voltage Temperature coefficient Ageing Operating temperature Rated voltage (U RC )
Taping TEF Serie : dimensions Radial Leaded Conformal Coated Capacitors DIMENSIONS in inches (mm) L T >.7 (> ) W Ø FEATURES ELECTRICAL SPECIFICATIONS X Multilayer chips ceramic capacitors NPO dielectric
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS NP0/X5R/X7R
Product Specification May 5, 2017 V.10 DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS 01005 NP0/X5R/X7R 4 V TO 25 V 0.5 pf to 470 nf RoHS compliant & Halogen Free 2 SCOPE This specification describes
Surface Mount Multilayer Ceramic Chip Capacitors for Ultra Small Commodity Applications
Surface Mount Multilayer Ceramic Chip Capacitors for Ultra Small Commodity Applications FEATURES High capacitance in unit size High precision dimensional tolerances Suitably used in high-accuracy automatic
MULTILAYER CERAMIC CAPACITORS
MULTILAYER CERAMIC CAPACITORS 1. INTRODUCTION MLCC Consists of a conducting material and electrodes. To manufacture a chip-type SMT and achieve miniaturization, high density and high efficiency, ceramic
100 pf to 47µF RoHS compliant & Halogen free
Product Specification August 7, 2017 V.4 DATA SHEET SURFACE MOUNT MULTILAYER CERAMIC CAPACITORS General purpose class II X6S 4 V TO 50 V 0 pf to 47µF RoHS compliant & Halogen free 2 SCOPE This specification
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, X5R
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, 6.3 V TO 50 V 10 nf to 100 µf RoHS compliant Product Specification Product specification 2 Surface-Mount
Capacitance. Dissipation factor at25 C. Insulation resistance at 25 C under U RC 50,000MΩ 20,000MΩ Aging None 2.5% per decade hour STANDARD RATINGS
Taping C3N / C4N : dimensions / C3E / C4E Series Capacitors Arrays FEATURES Space saving with multiple capacitors in the same package NPO and X7R dielectrics Capacitance range: 4.7pF to 3.3nF Ag/Pd/Pt,
High Q / Low ESR Multilayer SMD Ceramic Capacitor 0402, 0603 & 0805 Sizes, NP0 Dielectric, (MCHH)Series
Description: MLCC consists of a conducting material and electrodes. To manufacture a chip-type SMT and achieve miniaturization, high density and high efficiency, ceramic condensers are used. WTC HH series
Plastic Film Capacitors. Metallized Polypropylene Film Capacitor E C W F D E C W F D
Metallized Polypropylene Film Capacitor Type : ECWFD Non-inductive construction using metalized Polypropylene film with flame retardant epoxy resin coating. Features Small size Excellent frequency characteristics
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS Mid-voltage NP0/X7R
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS Mid-voltage NP0/X7R 100 V TO 630 V 0.47 pf to 470 nf RoHS compliant & Halogen Free Product Specification Product specification 2 SCOPE This specification
MULTILAYER CERAMIC CAPACITORS Microwave Series (RF) to 1111 Sizes (6.3V to 1500V) NP0 Dielectric Halogen Free & RoHS Compliance
MULTILAYER CERAMIC CAPACITORS Microwave Series (RF) 01005 to 1111 Sizes (6.3V to 1500V) NP0 Dielectric Halogen Free & RoHS Compliance *Contents in this sheet are subject to change without prior notice.
Wrap-and-Fill Oval Configuration Metalized Polyester Film Capacitors
Type 431P Wrap-and-Fill Oval Configuration Metalized Polyester Film Capacitors EECTRICA SPECIFICATIONS Capacitance Range:.1 μf to 15. μf Voltage Rating: 63 VC to 63 VC 4 VRMS to 22 VRMS Capacitance Tolerance:
AD Scope: Its specification applies to Radial Series Ceramic Capacitor. 2.How to order: CODE
1 1. Scope: Its specification applies to Radial Series Ceramic Capacitor. 2.How to order: CODE U AD10 R 102 K T Rated Voltage CodeT = 25 VDC U = 50 VDC Size Code : refer to the description in 3 Dielectric
RFB Series (High R.C., Long Life) MERITEK
FEATURES Low impedance and long life withstanding 10000 hours load life. Suitable for electronic ballast, adaptor and switching power. SPECIFICATIONS Item Operating Temp Range Rated Working Voltage Capacitance
Failure Rate 4 = Automotive
Automotive MLCC Automotive GENERAL DESCRIPTION AVX Corporation has supported the Automotive Industry requirements for Multilayer Ceramic Capacitors consistently for more than 10 years. Products have been
Failure Rate 4 = Automotive
Automotive MLCC Automotive GENERAL DESCRIPTION AVX Corporation has supported the Automotive Industry requirements for Multilayer Ceramic Capacitors consistently for more than 10 years. Products have been