RFB Series (High R.C., Long Life) MERITEK
|
|
|
- Justin Carr
- 5 years ago
- Views:
Transcription
1 FEATURES Low impedance and long life withstanding hours load life. Suitable for electronic ballast, adaptor and switching power. SPECIFICATIONS Item Operating Temp Range Rated Working Voltage Capacitance Tolerance (120Hz 20 C) Leakage Current Surge Voltage I 0.01CV or 3(uA) (20 C) *Whichever is greater after 3 minutes (20 C) Characteristic - 40 ~ +105 C 6.3 ~ 100VDC 20%(M) I : Leakage Current ( A) C : Rated Capacitance( F) V : Working Voltage (V) W.V S.V Dissipation Factor ( tan ) Add 0.02 per 1000uF for more than 1000uF (120Hz 20 C) W.V Low Temperature Stability Load Life Shelf Life tan Impedance ratio at 120Hz Rated Voltage (V) ~ C / +20 C C / +20 C After application of W.V. and +105 C ripple current value, the capacitor shall meet the following limits. ( DC + ripple peak voltage rated working voltage ) Rated Voltage (V) 6.3~10 16~100 Life Time D 6.3mm 4000hrs, D8~10mm 6000hrs, D 12.5mm 8000hrs Capacitance Change 25% of initial value. Dissipation Factor Leakage Current 200% of initial specified value initial specified value D 6.3mm 5000hrs, D8~10mm 7000hrs, D 12.5mm 10000hrs At +105 C no voltage application after 1000 hours, the capacitor shall meet the limits for load life characteristics. ( with voltage treatment ) PART NUMBER SYSTEM RFB 63V 101 M TA 10x16 DIMENSIONS (mm) Meritek Series Rated Voltage Rated Capacitance Express in micro farad(uf), First two digits are significant figures, Third digit denotes number of zeros. R denotes decimal point for values less than 10uF Tolerance M - 20% Package Code TA TR Blank Tape & Ammo Tape & Reel Case size (D) Diameter x (L) Length in mm (Optional) D F d a
2 RIPPLE CURRENT COEFFICIENTS Coefficient Frequency(Hz) 120 1k 10k 100k 0.47~10uF ~33uF ~330uF ~1000uF ~15000uF Temperature( C) Multiplier CASE SIZE & MAX RIPPLE CURRENT Cap. (uf) Case size : DxL (mm) Max. impedance : Ω 100kHz Max. ripple current : ma(rms) 105 C 100kHz V Item DxL 20 C -10 C R.C. DxL 20 C -10 C R.C. DxL 20 C -10 C R.C. 47 5x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x Cap. (uf) V Item DxL 20 C -10 C R.C. DxL 20 C -10 C R.C. DxL 20 C -10 C x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x R.C.
3 CASE SIZE & MAX RIPPLE CURRENT Cap. (uf) Case size : DxL (mm) Max. impedance : Ω 100kHz Max. ripple current : ma(rms) 105 C 100kHz V Item DxL 20 C -10 C R.C. DxL 20 C -10 C R.C x x x x x x x x x x x x x x x x x x x x x
4 TAPING SPECIFICATION Lead taping is designed for automatic insertion equipment. Capacitors with case size of 18mm x 35.5mm or smaller are available in taping type. DIMENSIONS (Ø4~ Ø10) Item Symbol Case Size 4 x 5 5 x 5 6.3x5 8 x 5 4 x 7 5 x 7 6.3x7 8 x 7 5 x x11 8 x x x16 10x18 10x20 Tolerance Lead wire diameter d ±0.05 Body height A MAX Intervals of bodies P 12.7 ±1.0 Intervals of punched holes holes and lead wire holes and bodies lead and lead P ±0.2 P 1 Remark Fig Fig 4. ± Fig Fig 3. P ±1.0 F Base tape width W 18.0 ±0.5 Adhesive tape width W MIN holes and base tape adhesive and base tape body bottom and tape Lead wire clinched height body top and tape Punched hole diameter Length of not good lead slit Base and adhesive tape thickness W ±0.5 W MAX H H ±0.5 H MAX D ±0.3 L 11.0 MAX t 0.6 ±0.3 h 0 ±2.0 h 1 0 ±1.0 ±0.5 Fig 1. Fig 4. Fig 2. F 1 : Fig 3. F 1 : Fig 1. Fig 4. Fig 2. Fig
5 DIMENSIONS (Ø12.5~ Ø18) Case Size Item Symbol Tolerance 12.5 x x x x x x x 35.5 Lead wire diameter d ±0.05 Body height A MAX Intervals of bodies P ±1.0 Intervals of punched holes holes and lead wire holes and bodies lead and lead P ±0.2 P ±0.7 P ±1.0 F Base tape width W 18.0 ±0.5 Adhesive tape width W MIN holes and base tape adhesive and base tape body bottom and tape body top and tape Punched hole diameter Length of not good lead slit Base and adhesive tape thickness W ±0.5 W MAX H ±0.5 H MAX D ±0.3 L 11.0 MAX t 0.6 ±0.3 h 0 ±2.0 h 1 0 ±1.0 Remark Fig 5. Fig 6. Fig 5. Fig 6.
6
7 SOLDERABILITY Capacitor lead wire is dipping into the oven, and then, dipping in 245±3, solder liquid for 3±0.5 seconds, the substance is above the liquid solder 2mm, the dipping lead must be adherent 95% fresh tin at least. RESISTANCE TO SOLDERING HEAT Put capacitor lead wire to dip 260±5 in solder liquor away the body 2mm, after 10±1 seconds taken out, after 2 hours in room temperature, should do final measurements, the values are following: (A) Capacitance change: ±10% of initial value (B) Dissipation factor: initial specified value (C) Leakage current: initial specified value (D) Visual: No damage
KF Series. -40 to to 100 VDC 0.47 to F
Low Impedance Features Used in communication equipments, switching power supply, industrial measuring instruments, etc. Load life 000~000 Hrs at Safety vent construction design. For detail specifications,
50 TZV 1500 M JDE VB 18X21.5
EXTENDED BASE FEATURES: VB- VIBRATION BASE AEC-Q200 SURFACE MOUNT ROHS COMPLIANT APPLICATIONS: AUTOMOTIVE POWER INDUSTRIAL SPEC: VALUE: MPN :50 TZV 1500 M JDE VB 18X21.5 VDC 50 CAPACITANCE 1500μF +/- 20%
Epoxy-coated Solid Electrolytic Tantalum Capacitors (LEAD FREE) TCR Series (LEAD FREE)
1. Scope This specification applies to. 2. Product identification T C R S 1 (1) (2) (3) (4) (5) (6) (7) Part no. Designation: (1) series: TCR represent series number of epoxy-coated solid electrolytic
APPROVAL SHEET FOR AL. ELECTROLYTIC CAPACITORS
NO : ED-A5540 TO : APPROVED APPROVAL SHEET FOR AL. ELECTROLYTIC CAPACITORS : BY: Series Description Part No. HV series, PLEASE RETURN US ONE COPY YOUR SIGED SPECIFICATION AFTER YOU APPROVED OF IT. APPROVED
SL Series 85 SMD Ecap
Features: Designed for surface mounting on high density PC board Supplied with carrier taping for automatic mounting machine Guarantees 2,000 hours at 85 C Specifications Item Operating Temperature Range
Resin-Molded, Radial-Lead Solid Tantalum Capacitors
Resin-Molded, Radial-Lead Solid Tantalum Capacitors PERFORMANCE CHARACTERISTICS Operating Temperature: -55 C to +25 C (above 85 C, voltage derating is required) Capacitance Range: 0. μf to 3 μf Capacitance
Summary of Specifications
Y5U Ceramic Radial Lead High CV 25 C Maximum Temperature Actual Size The series are radial lead ceramic capacitors from UCC/NCC. These capacitors have a very low and impedance which makes these capacitors
POE INTERNATIONAL CORPORATION. SPECIFICATION OF MULTI-LAYER RADIAL-LEADED TYPE CAPACITOR Ver: 8 Page: 1
SPECIFICATION OF MULTI-LAYER RADIAL-LEADED TYPE CAPACITOR Ver: 8 Page:. Scope: Its specification applies to Radial Series Ceramic Capacitor. 2.How to order: CODE: U RD2 R 02 K T Rated Voltage Code:U =
Prosperity Dielectrics Co., Ltd. 1 ACS-1045 Rev15
1. DESCRIPTION MLCC consists of a conducting material and electrodes. To manufacture a chip-type SMT and achieve miniaturization, high density and high efficiency, ceramic condensers are used. WTC high
Resin-Molded, Radial-Lead Solid Tantalum Capacitors
Resin-Molded, Radial-Lead Solid Tantalum Capacitors PERFORMANCE CHARACTERISTICS Operating Temperature: - 55 C to +25 C (above 85 C, voltage derating is required) Capacitance Range: 0. μf to 3 μf Capacitance
25, 35, 50, 63 Vdc. RoHS Compliant. Size Code ± 0.5 ± 0.3. F to
For filtering, Bypassing and Power Supply Decoupling with Long Life Requirements Using a ruggedized construction, type HZC_V withstands a 30 G vibration test. As the main countermeasure to vibration, the
Open-mode Design Capacitors
Open-mode Design Capacitors HOW TO ORDER OP 32 B 103 K 201 C T Series Size Dielectric Capacitance Tolerance Rated voltage Termination Packaging OP=Open-mode 21=0805 (2012) 31=1206 (3216) B=X7R Two significant
Cal-Chip Electronics, Incorporated TC Series Tantalum Solid Electrolytic Capacitors - Resin Molded Chip Type, Standard Type
: The T Series is designed for hybrid circuit and low profile printed circuit board applications where inductance is to be minimized, or where substrate space is at a premium. They can be attached to substrates
AD Scope: Its specification applies to Radial Series Ceramic Capacitor. 2.How to order: CODE
1 1. Scope: Its specification applies to Radial Series Ceramic Capacitor. 2.How to order: CODE U AD10 R 102 K T Rated Voltage CodeT = 25 VDC U = 50 VDC Size Code : refer to the description in 3 Dielectric
Leakage current 2 P 1 U 5 E P 0.5. Configuration. φ D. (mm) 6.3 ED 8 10 PD 12.5 to 18
Low Impedance, High Reliability High reliability withstanding 0 hour load life at +5 C (3000/ hours for smaller case sizes as specified below). Capacitance ranges available based on the numerical values
MULTILAYER CERAMIC CAPACITORS Low Inductance Series 0612 Size, 50V X7R Dielectric Halogen Free & RoHS Compliance
MULTILAYER CERAMIC CAPACITORS Low Inductance Series 0612 Size, 50V X7R Dielectric Halogen Free & RoHS Compliance *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_Low
CERAMIC CHIP CAPACITORS
Example below indicates : SNPO series, 470 pf, 5%, 50 Volt, Tape/Reel packed, 0805 case size. (EXAMPLE) S N P O 4 7 1 J 0 5 0 T 2 Series Series Code: SNPO, SX7R, SZ5U, SY5V. Note: SNPO indicates COG(NPO)
/ NTSSeries NTFSeries Temperature cycle : 1000 cycles
/ NTSSeries NTFSeries Temperature cycle : 00 cycles FEATURES 1. Large capacitance by small size. 2. Excellent noise absorption. 3. High permissible ripple current capability. 4. NTF: Temperature cycle
Chip tantalum capacitors (Fail-safe open structure type)
TCFG1C6M8R Chip tantalum capacitors (Fail-safe open structure type) TCFG Series Case Features 1) Safety design by open function built - in. 2) Wide capacitance range 3) Screening by thermal shock. Dimensions
No Item Code Description Series Reference. Thickness. M B min (mm) T (mm) code. See Thickness Specification Reference Table below
FEATURE A wide selection of sized is available (0201 to 2225) High capacitance in given case size Capacitor with lead-free termination (pure Tin) RoHS and HALOGEN compliant. Application: DC to DC converter.
Highlights. 25, 35, 50, 63, 80 Vdc. RoHS Compliant A (± 0.2) L ( ± 0.3) D (± 0.5) Capacitor Markings Voltage Code
For filtering, Bypassing and Power Supply Decoupling with Long Life Requirements Rated for 15 C, type HZA combines the advantages of aluminum electrolytic and aluminum polymer technology. These hybrid
CCDSeries FEATURES ORDERING CODE CCD B 101 K H 7 2 (1) (2) (3) (4) (5) (6) (7) (8) (9) Safety Standard Recognized Ceramic Capacitors
CCDSeries Configuration FEATURES Complying with IEC60384-14 4 th Edition Class X1Y1 and Class X1Y2 Dielectric Strength: AC2600V (r.m.s) for X1Y2 and AC4000V (r.m.s) for X1Y1 High Releability Coated With
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, X5R
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, 6.3 V TO 50 V 10 nf to 100 µf RoHS compliant Product Specification Product specification 2 Surface-Mount
CB Series Tantalum Capacitor
Features: Lead-Free Specially designed of general purpose Highly reliable resin dipped type Excellent frequency and temperature characteristics Non-flammable epoxy resin Technical Specifications: Item
100 pf to 47µF RoHS compliant & Halogen free
Product Specification August 7, 2017 V.4 DATA SHEET SURFACE MOUNT MULTILAYER CERAMIC CAPACITORS General purpose class II X6S 4 V TO 50 V 0 pf to 47µF RoHS compliant & Halogen free 2 SCOPE This specification
0805 CG 102 J 500 N T
NPO/COG for General-use is class I high frequency capacitor, its capacitance is very stable, almost will not change along with the temperature, voltage and time. Specially be suitable for high frequency
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, X5R
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, 6.3 V TO 50 V 10 nf to 100 µf RoHS compliant Product Specification Product specification 2 Surface-Mount
Electronics Corp. Multi-Layer Ceramic Capacitor. Lead-free termination is in compliance with the requirement of green plan and ROHS.
X5R, X7R Dielectrics Features A monolithic structure ensures high reliability and mechanical strength. High capacitance density. A wide range of capacitance values in standard case size. Suitable for high
Metallized Polyester PCMT 369 film capacitors
MKT RADIAL LACQUERED CAPACITORS (Dipped Type) Pitch 10.0/15.0/22.5/27.5 mm (reduced pitch ; 7.5mm) QUICK REFERENCE DATA Capacitance range (E12 series) Capacitance tolerance Rated voltage V Rdc Climatic
Chip tantalum capacitors (Fail-safe open structure type)
TCFG0J106M8R Chip tantalum capacitors (Fail-safe open structure type) TCFG Series Case Features 1) Safety design by open function built - in. 2) Wide capacitance range 3) Screening by thermal shock. Dimensions
Radial Aluminium Electrolytic Capacitors
Radial Aluminium Electrolytic Capacitors Low ESR / Z, 105 C Low ESR / Z, Endurance 2.500h to 10.000h at 105 C Rated voltage range: 6,3V to 100V, Nominal capacitance range: 0,47µF to 22.000µF Size range:
MULTILAYER CERAMIC CAPACITORS Open-Mode Series (50V to 630V) 0805 to 1812 Sizes X7R Dielectric Halogen Free & RoHS Compliance
MULTILAYER CERAMIC CAPACITORS Open-Mode Series (50V to 630V) 0805 to 1812 Sizes X7R Dielectric Halogen Free & RoHS Compliance *Contents in this sheet are subject to change without prior notice. Page 1
handbook, 2 columns handbook, halfpage 085 CS
FEATURES Polarized aluminium electrolytic capacitors, non-solid, self healing handbook, 2 columns SMD-version, rectangular case, insulated Miniaturized, high CV per unit volume, low height Flexible terminals,
MULTILAYER CERAMIC CAPACITORS General Purpose Series (10V to 100V) 0402 to 1812 Sizes NP0, X7R & Y5V Dielectrics RoHS Compliance
MULTILAYER CERAMIC CAPACITORS General Purpose Series (10V to 100V) 0402 to 1812 Sizes NP0, X7R & Y5V Dielectrics RoHS Compliance *Contents in this sheet are subject to change without prior notice. Page
AREP Series Aluminum Solid Electrolytic Capacitors Aluminum Solid Electrolytic Capacitors
Features -Super low ESR, high ripple current capability -Rated voltage:6.3~35vdc -Endurance:5,000 hours at 105ºC -Suitable for DC-DC converters, voltage regulators and decoupling applications -RoHS Compliant
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, X7R
Product Specification May 26, 2015 V.12 DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, 6.3 V TO 50 V 100 pf to 22 µf RoHS compliant & Halogen Free Product
Multilayer Chip Capacitors High Voltage
FEATURE Ceramic Body Inner Electrode (NiorPd) Outer Electrode Cu or Ag Ni Sn/Pb - Miniature Size - Highly Reliable Performance in High-Voltage - Industry Standard Size - Tape & Reel for Surface Mount Assembly
Multi-layer ceramic chip capacitors
Multi-layer ceramic chip capacitors (15 (42) size, chip capacitor)!features 1) Small size (1. x.5 x.5 mm) makes it perfect for lightweight portable devices. 2) Comes packed either in tape to enable automatic
DATA SHEET SURFACE MOUNT MULTILAYER CERAMIC CAPACITORS General purpose & High capacitance Class 2, X5R
DATA SHEET SURFACE MOUNT MULTILAYER CERAMIC CAPACITORS General purpose & High capacitance Class 2, 4 V TO 50 V 100 pf to 100 µf RoHS compliant & Halogen free Product Specification Product specification
LKT. Low Voltage Multilayer Chip Ceramic Capacitor. Capacitance and Capacitance Tolerance
Capacitance and Capacitance Tolerance Different circuit needs different capacitance and capacitance tolerance. So the selection of capacitance is depended on the need of customers. Dielectric Material
MULTILAYER CERAMIC CAPACITORS
MULTILAYER CERAMIC CAPACITORS 1. INTRODUCTION MLCC Consists of a conducting material and electrodes. To manufacture a chip-type SMT and achieve miniaturization, high density and high efficiency, ceramic
Chip Inductors. LCCM Series Chip Common Mode Filter FEATURES CONSTRUCTION
FEATURES Small wire wound chip inductor with ferrite core and 2 common mode lines. Highly effective in noise suppression High common-mode impedance at noise band an low differential mode impedance at signal
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, Y5V
Product Specification January 12, 2016 V.6 DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, 6.3 V TO 50 V 10 nf to 47 µf RoHS compliant & Halogen Free
ALUMINUM ELECTROLYTIC CAPACITORS REFERENCE SHEET
TO Messrs. AVNET ABACUS ALUMINUM ELECTROLYTIC CAPACITORS REFERENCE SHEET CUSTOMER PART No. Rubycon PART No. 35 TLV 470 M 12.5X13.5 DRAWING No. RERS 011758 ISSUE No. 1 ISSUE DATE 25 AUGUST 2010 ENGINEERING
Multilayer Chip Capacitors Array CL A 4 C 101 K B N E (1) (2) (3) (4) (5) (6) (7) (8) (9) FEATURE PART NUMBER CODE
FEATURE END TERMINATION CERAMIC ODY - Reduction in required real estate(more than 50%) - Reduction cost, Space and time for placement on PC - Reduction in number of solder joints - Easier PC design - Reduced
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, Y5V
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, 6.3 V TO 50 V 10 nf to 47 µf RoHS compliant & Halogen Free Product Specification Product specification
*Contents in this sheet are subject to change without prior notice.
MULTILAYER CERAMIC CAPACITORS Soft Termination High Voltage Series (SH_200V to 3000V) NP0 & X7R Dielectrics 0603 to 1812 Sizes, 200V to 3000V Halogen Free & RoHS Compliance *Contents in this sheet are
DATA SHEET. SURFACE MOUNT MULTILAYER CERAMIC CAPACITORS General purpose & High capacitance Class 2, X5R. 4 V TO 50 V 100 pf to 100 µf
Product Specification March 31, 2014 V.17 DATA SHEET SURFACE MOUNT MULTILAYER CERAMIC CAPACITORS General purpose & High capacitance Class 2, 4 V TO 50 V 100 pf to 100 µf RoHS compliant & Halogen free Product
Multilayer Ceramic Capacitors High Capacitance Series
Applications: Description: MLCC consists of a conducting material and electrodes. To manufacture a chip-type SMT and achieve miniaturization, high density and high efficiency, ceramic condensers are used.
Chip Type Y5U Temperature Characteristics
Chip Type Y5U Temperature Characteristics Features Dimensions Large capacitance in small size Temperature characteristics of Y5U (within +% to 56% in the range of 5 C to +85 C) Features equivalent to X7V.
Metal Oxide Varistor:TVM-B Series
Features. RoHS & Halogen Free (HF) compliant. EIA size: 040 ~ 0 3. Operating voltage: 5.5Vdc ~ 85Vdc 4. High surge suppress capability 5. Bidirectional and symmetrical V/I characteristics 6. Multilayer
30±5 0.6ø. Rated (pf) Capacitance First 2 significant figures followed by number of zero's i.e. above = 100(pF) Tolerance Code
CERAMIC DISC WDC/WDK/WD Class 1, Class 2 and Class 3 devices Various pitch and lead type options Epoxy coating for 2KV Our ceramic-disc range offers both close-tolerance class 1 parts, and high capacity
S SERIES X1/Y2 SAFETY CAPACITOR SPEC
FEATURES - Peak Impulse Surge: 5,000 VDC - Dielectric withstand strength: 1,500VAC PART NUMBER DESCRIPTION 1808 S 302 N 100 J C E Size Series Rated Voltage Dielectric Capacitance Tolerance Termination
Aluminum Electrolytic Capacitors SMD (Chip) Long Life Vertical
Aluminum Electrolytic Capacitors SMD (Chip) Long Life Vertical FEATURES Polarized aluminum electrolytic capacitors, non-solid electrolyte, self healing SMD-version with base plate, vertical construction
Aluminum Capacitors SMD (Chip) Long Life Vertical
Not for New Designs - Alternative Device: 53 CRV 53 CLV 40 CLH FEATURES Polarized aluminum electrolytic capacitors, non-solid electrolyte, self healing SMD-version with base plate, vertical construction
MULTILAYER CERAMIC CAPACITORS High Q / Low ESR Series (HH) 0201 to 0805 Sizes NP0 Dielectric Halogen Free & RoHS Compliance
MULTILAYER CERAMIC CAPACITORS High Q / Low ESR Series (HH) 0201 to 0805 Sizes NP0 Dielectric Halogen Free & RoHS Compliance *Contents in this sheet are subject to change without prior notice. Page 1 of
EN: This Datasheet is presented by the manufacturer. Please visit our website for pricing and availability at ore.hu.
EN: This Datasheet is presented by the manufacturer. Please visit our website for pricing and availability at www.hest ore.hu. Description: MLCC consists of a conducting material and electrodes. To manufacture
Chip tantalum capacitors
Chip tantalum capacitors TCO series Case TCO Series Case Features () ) Conductive polymer used for the cathode material. 2) Ultra-low ESR. (/ compared with the conventional type) 3) Screening by thermal
Specifications for approval
Add: No.8,Tengfeng 3rd Rd., Fenghuang 3rd Industrial Park, Fuyong, Bao an Dist, Shenzhen, China P.C:518103 Tel:+86 755 27863400 Fax:+86 755 27862551 E mail: info@china capacitors.com www.china capacitors.com
MULTILAYER CERAMIC CAPACITORS Microwave Series (RF) to 1111 Sizes (6.3V to 1500V) NP0 Dielectric Halogen Free & RoHS Compliance
MULTILAYER CERAMIC CAPACITORS Microwave Series (RF) 01005 to 1111 Sizes (6.3V to 1500V) NP0 Dielectric Halogen Free & RoHS Compliance *Contents in this sheet are subject to change without prior notice.
Aluminum Capacitors SMD (Chip) Long Life Vertical
Aluminum Capacitors SMD (Chip) Long Life Vertical FEATURES Polarized aluminum electrolytic capacitors, non-solid electrolyte, self healing SMD-version with base plate, vertical construction requiring minimum
DATA SHEET SURFACE MOUNT MULTILAYER CERAMIC CAPACITORS General purpose & High capacitance Class 2, X5R
Product Specification DATA SHEET SURFACE MOUNT MULTILAYER CERAMIC CAPACITORS General purpose & High capacitance Class 2, 4 V TO 50 V 100 pf to 220 µf RoHS compliant & Halogen free Product specification
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS NP0/X5R/X7R
Product Specification May 5, 2017 V.10 DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS 01005 NP0/X5R/X7R 4 V TO 25 V 0.5 pf to 470 nf RoHS compliant & Halogen Free 2 SCOPE This specification describes
MULTILAYER CERAMIC CAPACITORS High Q / Low ESR Series (HH) 0402, 0603 & 0805 Sizes NP0 Dielectric RoHS Compliance
MULTILAYER CERAMIC CAPACITORS 0402, 0603 & 0805 Sizes NP0 Dielectric RoHS Compliance *Contents in this sheet are subject to change without prior notice. Page of ASC_ HQ_Low ESR_(HH)_006N_AS Apr. 202 .
POLYMER Aluminum Electrolytic Capacitors
POLYMER Aluminum Electrolytic Capacitors Murata Manufacturing Co., Ltd.'s series of polymer aluminum electrolytic capacitors are ideal for low ESR, high capacitance applications in a variety of commercial
S P E C I F I C A T I O N S
TO : 2009-09-14 S P E C I F I C A T I O N S PRODUCT : CERAMIC CAPACITOR MODEL : DA (X1,Y1) SERIES Manufacturer Customer WRITTEN CHECKED APPROVED WRITTEN CHECKED APPROVED 9/14 9/14 9/14 / / / DONG IL ELECTRONICS
Aluminum Capacitors Axial Miniature, Long-Life
8 AML 0 ASM Fig. Component outlines smaller dimensions 8 AML Aluminum Capacitors longer life 8 AHT 0 ATC FEATURES Polarized aluminum electrolytic capacitors, non-solid electrolyte Axial leads, cylindrical
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, X7R
Product Specification May 12, 17 V.18 DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, 6.3 V TO 50 V 100 pf to 22 µf RoHS compliant & Halogen Free Product
MULTILAYER CERAMIC CAPACITORS Middle & High Voltage Series (200V to 4kV) 0402 to 1812 Sizes NP0, X7R & Y5V Dielectrics Halogen Free & RoHS compliance
MULTILAYER CERAMIC CAPACITORS Middle & High Voltage Series (200V to 4kV) 0402 to 1812 Sizes NP0, X7R & Y5V Dielectrics Halogen Free & RoHS compliance *Contents in this sheet are subject to change without
Metallized Polypropylene Film Capacitor Related Document: IEC
MKP 184 Metallized Polypropylene Film Capacitor Related Document: IEC 6084-16 MAIN APPLICATIONS: High voltage, high current and high pulse operations, deflection circuits in TV sets (S-correction and fly-back
CB Series Tantalum Capacitor
Features: Lead-Free Specially designed of general purpose Highly reliable resin dipped type Excellent frequency and temperature characteristics Non-flammable epoxy resin Technical Specifications: Item
PRODUCT: MULTILAYER CERAMIC CAPACITOR
SPECIFICATION OF MULTI-LAYER RADIAL-LEADED TYPE CAPACITOR Ver: 12 Page: 1 / 18 PRODUCT: MULTILAYER CERAMIC CAPACITOR TYPE: RADIAL-LEADED TYPE CAPACITOR CUSTOMER: DOC. NO.: D13-00-E-12 Ver.: 12 APPROVED
Applications: 1808 N 100 J 202 C T. Size Dielectric Capacitance Tolerance Rated Voltage Termination
Features: High voltage in a given case size. High stability and reliability. How To Order: MC Multicomp Description: The middle and high voltage series MLCC is designed by a special internal electrode
Multilayer Ceramic Capacitors
Multilayer Ceramic Capacitors Super Low Distortion Multilayer Ceramic Capacitors, Medium-High Voltage Multilayer Ceramic Capacitors and High Reliability Application Multilayer Ceramic Capacitors are noted
Low Inductance Ceramic Capacitor (LICC)
Low Inductance Ceramic Capacitor (LICC) LICC(Low Inductance Ceramic Capacitor) is a kind of MLCC that is used for decoupling in High Speed IC. The termination shape of LICC is different from that of MLCC.
MULTILAYER CERAMIC CAPACITORS Capacitor Arrays Series (10V to 100V) 4 x 0402, 4 x 0603 Sizes NP0, X7R & Y5V Dielectrics Halogen Free & RoHS Compliance
MULTILAYER CERAMIC CAPACITORS Capacitor Arrays Series (10V to 100V) 4 x 0402, 4 x 0603 Sizes NP0, X7R & Y5V Dielectrics Halogen Free & RoHS Compliance *Contents in this sheet are subject to change without
Microwave Multilayer SMD Ceramic Capacitor 0201 to 0805 Sizes (6.3V to 500V), NP0 Dielectric, (MCRF)Series
Description: MLCC consists of a conducting material and electrodes. To manufacture a chip-type SMT and achieve miniaturization, high density and high efficiency, ceramic condensers are used. WTC RF series
: 120% Rated Voltage. Capacitance Unit : pf Ex.: 2R0:2.0pF 100: : : Tolerance
CCT Series-High Capacitors Multilayer Ceramic Chip Capacitors [ High Capacitor ] CCT Series Middle (-) ratings from to and sizes from 0603 to 5. Features Special internal electrode design offers the highest
Aluminum Capacitors SMD (Chip) Standard. Table 1
085 CS Aluminum Capacitors Fig.1 Component outlines longer 085 CS 139 CLL life QUICK REFERENCE DATA DESCRIPTION VALUE Nominal case sizes (L x W x H in mm) 8.8 x 3.7 x 3.9 and 11.9 x 3.7 x 3.9 Rated capacitance
Multilayer SMD Ceramic Capacitors General Purpose Series
Description: MLCC consists of a conducting material and electrodes. To manufacture a chip-type SMT and achieve miniaturization, high density and high efficiency, ceramic condensers are used. MLCC is made
4 400 VDC VDC H ±3 % J ±5 % 40 C to +105 C 400 VDC, 630 VDC
Plastic Film Capacitors Metallized Polypropylene Film Capacitor Type: ECWF(L) Designed for high frequency and current applications. Features Small size Excellent frequency characteristics Low loss 8 C,
Ceramic Chip Capacitors
Ceramic Chip Capacitors Description Series Capacitance Range Circuit Page NPO Series pf ~. uf 2-4 Z5U Series K pf ~ uf 2-6 Ceramic Capacitors X7R Series 39 pf ~.47 uf 2-8 Axial-eaded Epoxy Coated pf ~.47
Aluminum Electrolytic Capacitors Axial Miniature, Long-Life
Aluminum Electrolytic Capacitors Axial Miniature, Long-Life 38 AML 0 ASM smaller dimensions Fig. QUICK REFERENCE DATA DESCRIPTION Nominal case sizes (Ø D x L in mm) 6.3 x.7 to 0 x 5 VALUE 0 x 30 to x 38
Aluminum Electrolytic Capacitors Axial Standard
00/0 AS Aluminum Electrolytic Capacitors Axial Standard 04/04 ASH high voltage 00/0 AS smaller dimensions 0 ASM Fig. QUICK REFERENCE DATA DESCRIPTION VALUE Nominal case sizes (Ø D x L in mm) 4.5 x 0 to
Standard EIA Color Code Table
Standard EIA Color Code Table BAND: ±%, ±%, AND ±% st Band nd Band rd Band th Band Color st Band (st figure) nd Band (nd figure) rd Band (multiplier) th Band (tolerance) Black Brown Red Orange Yellow Green
High Q / Low ESR Multilayer SMD Ceramic Capacitor 0402, 0603 & 0805 Sizes, NP0 Dielectric, (MCHH)Series
Description: MLCC consists of a conducting material and electrodes. To manufacture a chip-type SMT and achieve miniaturization, high density and high efficiency, ceramic condensers are used. WTC HH series
DC Film Capacitors MKT Radial Lacquered Type
l 467 w FEATURES Available taped and loose in box RoHS compliant Seating plane (1) h APPLICATIONS Blocking and coupling, bypass and energy reservoir. α (2) l t REFERENCE STANDARDS IEC 60384-2 MARKING C-value;
handbook, 050/052 4 columns smaller
4/5 PED-ST FEATURES Polarized aluminium electrolytic capacitors, non-solid Large types, cylindrical aluminium case, insulated with a blue sleeve Also available in bolt version (PED-STB) Pressure relief
Safety Certificated Capacitors X2/Y3
Safety Certificated Capacitors X2/Y3 HOW TO ORER S3 42 N 100 J 202 L T Series Size ielectric Capacitance Tolerance Rated voltage Termination Packaging S3=X2/Y3 42=1808 (4520) 43=1812 (4532) N=NP0 (C0G)
Solid Tantalum SMD Capacitors TANTAMOUNT, Hi-Rel COTS, Low ESR, Metal Case
Solid Tantalum SMD Capacitors TANTAMOUNT, Hi-Rel COTS, Low ESR, Metal Case PERFORMANCE CHARACTERISTICS Operating Temperature: -55 C to +125 C (above 85 C, voltage derating is required) Capacitance Range:
Hermetically Sealed, Axial-Lead to CECC Specifications
Hermetically Sealed, Axial-Lead CTS1, CTS13, 749DX FEATURES Terminations: Tin/lead (SnPb), 100 % tin (RoHS compliant) Hermetically sealed metal case with plastic film insulation Extended capacitance range
AT Series. High Temperature MLCC 200ºC & 250 C Rated HOW TO ORDER ELECTRICAL SPECIFICATIONS DIMENSIONS AT10
Present military specifications, as well as a majority of commercial applications, require a maximum operating temperature of 25 C. However, the emerging market for high temperature electronics demands
MULTILAYER CERAMIC CAPACITORS Low Profile Series 0402 to 1210 Sizes X7R, X5R & Y5V Dielectrics Halogen Free & RoHS Compliance
MULILAYER CERAMIC CAPACIORS Low Profile Series 0402 to 1210 Sizes X7R, X5R & Y5V s Halogen Free & RoHS Compliance *Contents in this sheet are subject to change without prior notice. Page 1 of 9 ASC_ Low
Varistors to
FEATURES Zinc oxide disc, epoxy coated Straight leads Straight leads with flange (2322 592 and 593 series only) Kinked leads. APPLICATION Suppression of transients. DESCRIPTION The varistors consist of
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose Class 1, NP0
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose Class 1, 16 V TO 50 V 0.22 pf to 33 nf RoHS compliant & Halogen Free Product Specification August 05, 2011 V.8 Product specification
Multilayer Ceramic Chip Capacitors
SELECTION OF CERAMIC CHIP CAPACITORS JARO Multilayer Ceramic Chip Capacitors offer the most complete range of characteristics and configurations available in the industry. We suggest your selection of
Aluminum Electrolytic Capacitors Axial High Temperature High Voltage for E.L.B.
Aluminum Electrolytic Capacitors Axial High Temperature High Voltage for E.L.B. 04-043 ASH standard 04/043 AHH-ELB 550 V/4 h Fig. 85 C 04/043 AMH-ELB 550 V/4 h FEATURES Useful life: 0 000 h at 05 C Stable
Multilayer Ceramic Capacitors Y5V
Multilayer Ceramic Capacitors Features Miniature size Wide capacitance, TC, voltage and tolerance range Industry standard sizes Available for wave, reflow or vapor phase solder How to Order 0805 F 104
Multilayer Ceramic Capacitors Leaded Capacitors. Packaging. Internal coding. Capacitance tolerance
Leaded Capacitors Leaded Ordering code system B37979N 1 100 K 0 54 Packaging 51 ^ cardboard tape, reel packing (360-mm reel) 54 ^ Ammo packing (standard) 00 ^ bulk Internal coding Capacitance tolerance
Plastic Film Capacitors. Metallized Polypropylene Film Capacitor E C W F D E C W F D
Metallized Polypropylene Film Capacitor Type : ECWFD Non-inductive construction using metalized Polypropylene film with flame retardant epoxy resin coating. Features Small size Excellent frequency characteristics