ATC 900 C Series X7R Ceramic RF Power Multilayer Capacitors

Transcription

1 AT 900 Series X7R eramic RF Power Multilayer apacitors ase Size apacitance Range (.250" x.250") 0.01 µf to 1 µf Low ESR/ESL Mid-K Rugged onstruction High Reliability Available with Encapsulation Option* AT, the industry leader, offers new improved ESR/ESL performance for the 900 Series RF apacitors. This Series exhibits superior volumetric efficiency, providing high levels of capacitance for HF/ RF power applications. eramic construction provides a rugged, hermetic package. AT offers an encapsulation option for applications requiring extended protection against arc-over and corona. Typical functional applications: Bypass, oupling and D Blocking. Typical circuit applications: HF/RF Power Amplifiers, Switching Power Supplies, High Frequency SMPS Filters and Medical Equipment. *For leaded styles only. ENVIRONMENTAL TESTS AT 900 Series apacitors are designed and manufactured to meet and exceed the requirements of EIA-198, MIL-PRF and MIL-PRF-123. THERMAL SHOK: MIL-STD-202, Method 107, ondition A. MOISTURE RESISTANE: MIL-STD-202, Method 106. LOW VOLTAGE HUMIDITY: MIL-STD-202, Method 103, ondition A, with 1.5 Volts D applied while subjected to an environment of 85 with 85% relative humidity for 240 hours min. LIFE TEST: MIL-STD-202, Method 108, for 2000 hours, at % WVD applied. ELETRIAL AND MEHANIAL SPEIFIATIONS DISSIPATION FATOR (DF): 2.5% at 1 KHz. TEMPERATURE OEFFIIENT OF APAITANE (T): Less than ±15% (-55 to +125 ) INSULATION RESISTANE (IR): 0.01 MFd to 1 MFd 0 megohms +25 at rated WVD. megohms +125 at rated WVD. WORKING VOLTAGE (WVD): See apacitance Values Table, page 2. DIELETRI WITHSTANDING VOLTAGE (DWV): ase : 250% of rated WVD for 5 secs. AGING EFFETS: 3% maximum per decade hour. PIEZOELETRI EFFETS: Negligible DIELETRI ABSORPTION: 2% typical OPERATING TEMPERATURE RANGE: -55 to +125 (No derating of working voltage). TERMINATION STYLES: Available in various surface mount and leaded styles. See Mechanical onfigurations, page 3. TERMINAL STRENGTH: Terminations for chips and pellets withstand a pull of 10 lbs. min., 15 lbs. typical, for 5 seconds in direction perpendicular to the termina-tion surface of the capacitor. Test per MIL-STD-202, method 211. AT # Rev. J 9/07

2 AT 900 apacitance Values AP. ODE AP. (MFd) TOL. RATED WVD K, M, N VRMS = X WVD SPEIAL VALUES, TOLERANES, HIGHER WVD AND MATHING AVAILABLE. ENAPSULATION OPTION AVAILABLE. PLEASE ONSULT FATORY. APAITANE TOLERANE ode K M N Tol. ±10% ±20% ±30% Series ase Size apacitance ode: First 2 significant digits for capacitance. Indicates number of zeros following digits of capacitance in picofarads except for decimal values. apacitance Tolerance AT PART NUMBER ODE AT M W X Packaging - AT Matrix Tray (Standard) T - Tape and Reel, 500 pc. qty. I - Special Packaging. onsult Factory Laser Marking (Optional) WVD Termination ode The above part number refers to a 900 Series (case size ) 1.0 MFd capacitor, M tolerance (±20%), WVD, with W termination (Tin /Lead, Solder Plated over Nickel Barrier), laser marking and Waffle-packaging. AT accepts orders for our parts using designations with or without the AT prefix. Both methods of defining the part number are equivalent, i.e., part numbers referenced with the AT prefix are interchangeable to parts referenced without the AT prefix. ustomers are free to use either in specifying or procuring parts from American Technical eramics. For additional information and catalogs contact your AT representative or call direct at (631) onsult factory for additional performance data. 2 A M E R I A N T E H N I A L E R A M I S AT Europe sales@atceramics-europe.com AT North America sales@atceramics.com AT Asia sales@atceramics-asia.com

3 AT 900 apacitors: Mechanical onfigurations AT SERIES & ASE SIZE AT TERM. ODE ASE SIZE & TYPE OUTLINES W/T IS A TERMINATION SURFAE LENGTH (L) BODY DIMENSIONS INHES (mm) WIDTH (W) THIKNESS (T) LEAD AND TERMINATION DIMENSIONS AND MATERIALS OVERLAP (Y) MATERIALS W Solder Plate ) Tin /Lead, Solder Plated over Nickel Barrier Termination P Pellet ).040 (1.02) Heavy Tin/Lead oated, over Nickel Barrier Termination T MS AR Solderable Nickel Barrier Microstrip Axial Ribbon ).250 ±.015 (6.35 ±0.38).145 (3.68) for capacitance values < 0.82 MFd;.165 (4.19) for capacitance values 0.82 MFd. RoHS ompliant Tin Plated over Nickel Barrier Termination High Purity Silver Leads L L =.500 (12.7) min. W L =.240 ±.005 (6.10 ±.127) T L =.004 ±.001 (.102 ±.025) Leads are Attached with High Temperature Solder. AW Axial Wire.245 ±.025 (6.22 ±0.64) N/A Silver-plated opper Leads L L = 1.0 (25.4) min. Dia. =.032 ±.002 (0.81 ±0.05) VA Veritical Axial Ribbon Silver Leads L L =.500 (12.7) min. W L = * See below T L =.004 ±.001 (.102 ±.025) RW Radial Wire Silver-plated opper Leads L L = 1.0 (25.4) min. Dia. =.032 ±.002 (0.81 ±0.05) ustom lead styles and lengths are available; consult factory. All leads are high purity silver attached with high temperature solder and are RoHS compliant. **WL =.110 (2.79) for capacitance values < 0.82 MFd.; WL =.130 (3.30) for capacitance values 0.82 MFd. 3 A M E R I A N T E H N I A L E R A M I S AT Europe sales@atceramics-europe.com AT North America sales@atceramics.com AT Asia sales@atceramics-asia.com

4 AT 900 apacitors: Non-Magnetic Mechanical onfigurations AT SERIES & ASE SIZE AT TERM. ODE ASE SIZE & TYPE OUTLINES W/T IS A TERMINATION SURFAE LENGTH (L) BODY DIMENSIONS INHES (mm) WIDTH (W) THIKNESS (T) LEAD AND TERMINATION DIMENSIONS AND MATERIALS OVERLAP (Y) MATERIALS WN Non-Mag Solder Plate TN Non-Mag Solderable Barrier ) ).250 ±.015 (6.35 ±0.38).145 (3.68) < 0.82 MFd.165 (4.19) 0.82 MFd.040 (1.02) Tin/Lead, Solder Plated over Non-Magnetic Barrier Termination RoHS ompliant Tin Plated over Non-Magnetic Barrier Termination ustom lead styles and lengths are available; consult factory. All leads are high purity silver attached with high temperature solder and are RoHS compliant. Suggested Mounting Pad Dimensions 4 A M E R I A N T E H N I A L E R A M I S AT North America AT Europe AT Asia sales@atceramics.com sales@atceramics-europe.com sales@atceramics-asia.com

5 AT 900 Performance Data 0.1 ESR VS. APAITANE AT SERIES 900, ASE Q VS. APAITANE AT SERIES 900, ASE ESR (Ohms) 30 MHz Q MHz (Typical) 0.01 APAITANE(µF) (Typical) 0.1 APAITANE (µf) FREQUENY (MHz) 10 SERIES RESONANE VS. APAITANE AT SERIES 900, ASE RMS URRENT (Amps) 10 URRENT RATING VS. APAITANE AT SERIES 900, ASE The current rating is based on a 65 mounting surface and a device thermal resistance () of 15 /W. A power dissipation of 4 W will result in a case temperature of MHz 1 (Typical) APAITANE (µf) Dotted line = Power dissipation limited 1 APAITANE (µf) 5 A M E R I A N T E H N I A L E R A M I S AT Europe sales@atceramics-europe.com AT North America sales@atceramics.com AT Asia sales@atceramics-asia.com

6 Sales of AT products are subject to the terms and conditions contained in American Technical eramics orp. Terms and onditions of Sale (AT document # Rev. B; 12/05). opies of these terms and conditions will be provided upon request. They may also be viewed on AT's website at lick on the link for Terms and onditions of Sale. AT has made every effort to have this information as accurate as possible. However, no responsibility is assumed by AT for its use, nor for any infringements of rights of third parties which may result from its use. AT reserves the right to revise the content or modify its product without prior notice American Technical eramics orp. All Rights Reserved. AT # Rev. J 9/07