Solid Tantalum Chip Capacitors, TANTAMOUNT, Conformal Coated, Maximum CV, Low ESR

Size: px
Start display at page:

Download "Solid Tantalum Chip Capacitors, TANTAMOUNT, Conformal Coated, Maximum CV, Low ESR"

Transcription

1 Solid Tantalum Chip Capacitors, TANTAMOUNT, Conformal Coated, Maximum CV, Low FEATURES Large capacitance rating range Mounting: Surface mount Lowest for a surface mount tantalum chip capacitor Terminations: % tin (2) standard; tin/lead available 8 mm, 12 mm tape and reel packaging available per EIA 481 and reeling per IEC " [178 mm] standard. 13" [330 mm] available. Case code compatibility with EIA 535BAAC and CECC molded chips Compliant to RoHS Directive 2002/95/EC Note * Pb containing terminations are not RoHS compliant, exemptions may apply PERFORMANCE CHARACTERISTICS Operating Temperature: - 55 C to + 85 C (to C with voltage derating) Capacitance Range: 1.0 μf to 1500 μf Capacitance Tolerance: ± %, ± 20 % standard Voltage Rating: 4 V DC to 50 V DC Equivalent Series Resistance: readings measured at, + 25 C from 3500 m to 30 m ORDERING INFORMATION 477 X0 004 R 2 T TYPE CAPACITANCE CAPACITANCE TOLERANCE DC VOLTAGE RATING AT + 85 C CASE CODE TERMINATION REEL SIZE AND PACKAGING This is expressed in pf. The first two digits are the significant figures. The third is the number of zeros to follow. X0 = ± 20 % X9 = ± % This is expressed in V. To complete the three-digit block, zeros precede the voltage rating. A decimal point is indicated by an R (6R3 = 6.3 V). See Ratings and Case Code table 2 = % tin 4 = Gold plated 8 = Solder plated (60/40) Special order Tape and reel T = 7" [178 mm] reel W = 13" [330 mm] reel Note Preferred tolerances and reel sizes are in bold. We reserve the right to supply higher voltage ratings and tighter capacitance tolerance capacitors in the same case size. Voltage substitutions will be marked with the higher voltage rating. DIMENSIONS in inches [millimeters] L MAX. D REF. A B W J MAX. J MAX. Tantalum Wire Nib Identifies Anode (+) Terminal L MAX. W H A B D REF. J MAX. B / / ± ± [4.0] [ /- 0.4] [ /- 0.6] [0.8 ± 0.3] [2.5 ± 0.4] [3.5] [] C ± ± ± ± [7.1] [3.2 ± 0.3] [2.5 ± 0.3] [1.3 ± 0.3] [4.6 ± 0.6] [6.0] [] D [7.5] / [ /- 0.6] ± [2.8 ± 0.3] ± [1.3 ± 0.3] 81 ± [4.6 ± 0.6] 6.4 [0.252] [] R / / ± ± [7.2] [ /- 0.6] [ /- 0.4] [1.3 ± 0.3] [4.6 ± 0.6] [0.244] [] Note The anode termination (D less B) will be a minimum of 0.012" [0.3 mm] Revision: 30-Jun-11 1 Document Number: H

2 RATINGS AND S μf 4 V 6.3 V V 16 V 20 V 25 V 35 V 50 V 1.0 B 2.2 B 3.3 B 4.7 B B C 6.8 B C D B B 15 B B C C/D R 22 B B B B/C C D/R 33 B B B/C D R 47 B B/C C/D D/R R 68 B B/C C/D D D/R B B B/C C/D D R 120 C C R R 150 B/C C/D D 180 D R 220 C/D C/D/R R 270 D 330 C C/D D/R R 390 R 470 C/R D/R R 680 D R R 0 R 1500 R STANDARD RATINGS CAPACITANCE (μf) PART NUMBER MAX. DCL (μa) MAX. DF 120 Hz (%) MAX. () MAX. RIPPLE I RMS (A) 4 V DC AT+ 85 C, 2.7 V DC AT C 33 B 336(1)004B(2)(3) B 7(1)004B(2)(3) B 157(1)004B(2)(3) C 157(1)004C(2)(3) D 277(1)004D(2)(3) C 337(1)004C(2)(3) C 477(1)004C(2)(3) R 477(1)004R(2)(3) D 687(1)004D(2)(3) R 158(1)004R(2)(3) V DC AT + 85 C, 4 V DC AT C 22 B 226(1)6R3B(2)(3) B 686(1)6R3B(2)(3) B 7(1)6R3B(2)(3) Notes (1) Tolerance: For % tolerance, specify X9 ; for 20 % tolerance, change to X0 (2) Termination: For % tin specify 2, for gold plated specify 4, for solder plated 60/40 specify 8 (3) Packaging code: For 7" reels specify T, for 13" reels specify W. Revision: 30-Jun-11 2 Document Number: 40006

3 STANDARD RATINGS CAPACITANCE (μf) PART NUMBER MAX. DCL (μa) MAX. DF 120 Hz (%) MAX. () MAX. RIPPLE I RMS (A) 6.3 V DC AT + 85 C, 4 V DC AT C 120 C 127(1)6R3C(2)(3) C 227(1)6R3C(2)(3) D 227(1)6R3D(2)(3) C 337(1)6R3C(2)(3) D 337(1)6R3D(2)(3) R 397(1)6R3R(2)(3) D 477(1)6R3D(2)(3) R 477(1)6R3R(2)(3) R 687(1)6R3R(2)(3) R 8(1)6R3R(2)(3) V DC AT + 85 C, 7 V DC AT C 15 B 156(1)0B(2)(3) B 226(1)0B(2)(3) B 336(1)0B(2)(3) B 476(1)0B(2)(3) B 686(1)0B(2)(3) C 686(1)0C(2)(3) B 7(1)0B(2)(3) C 7(1)0C(2)(3) C 127(1)0C(2)(3) C 157(1)0C(2)(3) D 157(1)0D(2)(3) D 187(1)0D(2)(3) C 227(1)0C(2)(3) D 227(1)0D(2)(3) R 227(1)0R(2)(3) D 337(1)0D(2)(3) R 337(1)0R(2)(3) R 477(1)0R(2)(3) R 687(1)0R(2)(3) V DC AT + 85 C, V DC AT C 15 B 156(1)016B(2)(3) B 226(1)016B(2)(3) B 336(1)016B(2)(3) C 336(1)016C(2)(3) B 476(1)016B(2)(3) C 476(1)016C(2)(3) C 686(1)016C(2)(3) D 686(1)016D(2)(3) C 7(1)016C(2)(3) D 7(1)016D(2)(3) R 127(1)016R(2)(3) D 157(1)016D(2)(3) R 187(1)016R(2)(3) R 227(1)016R(2)(3) R 337(1)016R(2)(3) Notes (1) Tolerance: For % tolerance, specify X9 ; for 20 % tolerance, change to X0 (2) Termination: For % tin specify 2, for gold plated specify 4, for solder plated 60/40 specify 8 (3) Packaging code: For 7" reels specify T, for 13" reels specify W. Revision: 30-Jun-11 3 Document Number: 40006

4 STANDARD RATINGS CAPACITANCE (μf) PART NUMBER MAX. DCL (μa) MAX. DF 120 Hz (%) MAX. () MAX. RIPPLE I RMS (A) 20 V DC AT + 85 C, 13 V DC AT C 4.7 B 475(1)020B(2)(3) B 685(1)020B(2)(3) B 6(1)020B(2)(3) B 226(1)020B(2)(3) C 226(1)020C(2)(3) C 476(1)020C(2)(3) D 476(1)020D(2)(3) D 686(1)020D(2)(3) D 7(1)020D(2)(3) R 127(1)020R(2)(3) V DC AT + 85 C, 17 V DC AT C 3.3 B 335(1)025B(2)(3) B 6(1)025B(2)(3) C 156(1)025C(2)(3) C 226(1)025C(2)(3) D 336(1)025D(2)(3) D 476(1)025D(2)(3) R 476(1)025R(2)(3) D 686(1)025D(2)(3) R 686(1)025R(2)(3) R 7(1)025R(2)(3) V DC AT + 85 C, 23 V DC AT C 2.2 B 225(1)035B(2)(3) B 475(1)035B(2)(3) C 685(1)035C(2)(3) C 156(1)035C(2)(3) D 156(1)035D(2)(3) D 226(1)035D(2)(3) R 226(1)035R(2)(3) R 336(1)035R(2)(3) R 476(1)035R(2)(3) V DC AT + 85 C, 33 V DC AT C 1.0 B 5(1)050B(2)(3) C 475(1)050C(2)(3) D 685(1)050D(2)(3) R 156(1)050R(2)(3) Notes (1) Tolerance: For % tolerance, specify X9 ; for 20 % tolerance, change to X0 (2) Termination: For % tin specify 2, for gold plated specify 4, for solder plated 60/40 specify 8 (3) Packaging code: For 7" reels specify T, for 13" reels specify W. Revision: 30-Jun-11 4 Document Number: 40006

5 RECOMMENDED VOLTAGE DERATING GUIDELINES (for temperature below + 85 C) STANDARD CONDITIONS. FOR EXAMPLE: OUTPUT FILTERS Capacitor Voltage Rating Operating Voltage SEVERE CONDITIONS. FOR EXAMPLE: INPUT FILTERS Capacitor Voltage Rating Operating Voltage TYPICAL CURVES ; AND VS. FREQUENCY B Case C Case μf, 35 V DC 1.0 μf, 25 V DC 1 μf, 6.3 V DC 22 μf, 6.3 V DC 1K K K 1M M D Case K K K 1M M R Case μf, 6.3 V DC 22 μf, 25 V DC 390 μf, 6.3 V DC 33 μf, 35 V DC K K K 1M M K K K 1M M Revision: 30-Jun-11 5 Document Number: 40006

6 POWER DISSIPATION MAXIMUM PERMISSIBLE POWER DISSIPATION (W) IN FREE AIR B C D 50 R STANDARD PACKAGING QUANTITY UNITS PER REEL 7" REEL 13" REEL B C D R PRODUCT INFORMATION Conformal Coated Guide Moisture Sensitivity SELECTOR GUIDES Solid Tantalum Selector Guide Solid Tantalum Chip Capacitors FAQ Frequently Asked Questions Revision: 30-Jun-11 6 Document Number: 40006

7 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer s technical experts. Product specifications do not expand or otherwise modify Vishay s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 90 Revision: 11-Mar-11 1

Solid Tantalum Surface Mount Chip Capacitors TANTAMOUNT, Molded Case, for Medical Instruments

Solid Tantalum Surface Mount Chip Capacitors TANTAMOUNT, Molded Case, for Medical Instruments Solid Tantalum Surface Mount Chip Capacitors TANTAMOUNT, Molded Case, for Medical Instruments FEATURES For non-life support medical applications High reliability Weibull grading options DC leakage at 0.005

More information

Solid Tantalum SMD Capacitors TANTAMOUNT, Hi-Rel COTS, Low ESR, Metal Case

Solid Tantalum SMD Capacitors TANTAMOUNT, Hi-Rel COTS, Low ESR, Metal Case Solid Tantalum SMD Capacitors TANTAMOUNT, Hi-Rel COTS, Low ESR, Metal Case PERFORMANCE CHARACTERISTICS Operating Temperature: -55 C to +125 C (above 85 C, voltage derating is required) Capacitance Range:

More information

Filter Inductors, High Current, Radial Leaded

Filter Inductors, High Current, Radial Leaded Filter Inductors, High Current, Radial Leaded ELECTRICAL SPECIFICATIONS Inductance: Measured at 1.0 V with zero DC current Dielectric: 2500 V RMS between winding and 0.250" [6.35 mm] of insulating covering

More information

Resin-Molded, Radial-Lead Solid Tantalum Capacitors

Resin-Molded, Radial-Lead Solid Tantalum Capacitors Resin-Molded, Radial-Lead Solid Tantalum Capacitors PERFORMANCE CHARACTERISTICS Operating Temperature: -55 C to +25 C (above 85 C, voltage derating is required) Capacitance Range: 0. μf to 3 μf Capacitance

More information

Ceramic Disc Capacitors Class 1 and 2, 500 V DC, General Purpose

Ceramic Disc Capacitors Class 1 and 2, 500 V DC, General Purpose D Series Ceramic Disc Capacitors D D FEATURES Low losses High stability Tangent line SH Tangent line SH High capacitance in small size Kinked (preferred) or straight leads Compliant to RoHS directive 2002/95/EC

More information

Resin-Molded, Radial-Lead Solid Tantalum Capacitors

Resin-Molded, Radial-Lead Solid Tantalum Capacitors Resin-Molded, Radial-Lead Solid Tantalum Capacitors PERFORMANCE CHARACTERISTICS Operating Temperature: - 55 C to +25 C (above 85 C, voltage derating is required) Capacitance Range: 0. μf to 3 μf Capacitance

More information

SuperTan Extended (STE) Capacitors, Wet Tantalum Capacitors with Hermetic Seal

SuperTan Extended (STE) Capacitors, Wet Tantalum Capacitors with Hermetic Seal SuperTan Extended () Capacitors, Wet Tantalum Capacitors with Hermetic Seal FEATURES SuperTan Extended () represents a major breakthrough in wet tantalum capacitor Available technology. Its unique cathode

More information

Wet Tantalum Capacitors Silver Case with Glass-to-Metal Hermetic Seal, TANTALEX

Wet Tantalum Capacitors Silver Case with Glass-to-Metal Hermetic Seal, TANTALEX Wet Tantalum Capacitors Silver Case with Glass-to-Metal Hermetic Seal, TANTALEX PERFORMANCE CHARACTERISTICS Operating Temperature: -55 C to +85 C (+125 C with voltage derating) Capacitance Range: 738D

More information

Solid-Electrolyte TANTALEX Capacitors, Axial-Leaded, Molded Case

Solid-Electrolyte TANTALEX Capacitors, Axial-Leaded, Molded Case Solid-Electrolyte TANTALEX Capacitors, Axial-Leaded, Molded Case PERFORMANCE CHARACTERISTICS Operating Temperature: -55 C to +85 C (to +125 C with voltage derating) Capacitance Tolerance: at 120 Hz, +25

More information

Surface Mount Multilayer Ceramic Capacitors for Pulse Current Applications

Surface Mount Multilayer Ceramic Capacitors for Pulse Current Applications Surface Mount Multilayer Ceramic Capacitors for Pulse Current Applications ELECTRICAL SPECIFICATIONS Note Electrical characteristics at +25 C unless otherwise specified FEATURES Low electrostrictive ceramic

More information

RF Power Feed-Through Capacitors with Conductor Rod, Class 1 Ceramic

RF Power Feed-Through Capacitors with Conductor Rod, Class 1 Ceramic DB 06030, DB 06040, DB 06060 RF Power Feed-Through Capacitors with Conductor Rod, Class Ceramic FEATURES Small size Geometry minimizes inductance Wide range of capacitance values APPLICATIONS Filtering

More information

Surface Mount Multilayer Ceramic Chip Capacitors DSCC Qualified Type 05007

Surface Mount Multilayer Ceramic Chip Capacitors DSCC Qualified Type 05007 Surface Mount Multilayer Ceramic Chip Capacitors DSCC Qualified Type 05007 FEATURES US defense supply center approved Federal stock control number, Available CAGE CODE 2770A Available Case size 1206 Stable

More information

Conductive Polymer Aluminum Capacitors SMD (Chip), Low Impedance

Conductive Polymer Aluminum Capacitors SMD (Chip), Low Impedance Conductive Polymer Aluminum Capacitors SMD (Chip), Low Impedance FEATURES Long useful life: up to 5000 h at 105 C Very low ESR and highest ripple current SMD-version with base plate, lead (Pb) free reflow

More information

Surface Mount Multilayer Ceramic Chip Capacitors for Safety Certified Applications

Surface Mount Multilayer Ceramic Chip Capacitors for Safety Certified Applications Surface Mount Multilayer Ceramic Chip Capacitors for Safety Certified Applications FEATURES Approved IEC 60384-14 Specialty: safety certified capacitors Wet build process Reliable Noble Metal Electrode

More information

Double Metallized Polypropylene Film Capacitor Radial AC and Pulse Capacitor

Double Metallized Polypropylene Film Capacitor Radial AC and Pulse Capacitor End of Life September 018 - Alternative Device: MMKP8 Double Metallized Polypropylene Film Capacitor Radial AC and Pulse Capacitor FEATURES Material categorization: for definitions of compliance please

More information

AC and Pulse Film/Foil Capacitors Radial Potted Type

AC and Pulse Film/Foil Capacitors Radial Potted Type KP186 AC and Pulse Film/Foil Capacitors Radial Potted Type FEATURES Material categorization: For definitions of compliance please see www.vishay.com/doc?9991 APPLICATIONS High voltage, very high current

More information

Aluminum Capacitors Power Printed Wiring Style

Aluminum Capacitors Power Printed Wiring Style FEATURES Polarized aluminum electrolytic capacitors, non-solid electrolyte Large types, cylindrical aluminum case, insulated Provided with keyed polarity Very long useful life: 000 h at 8 C Low ESR, high

More information

Small Signal Zener Diodes, Dual

Small Signal Zener Diodes, Dual DZ-V-G Series Small Signal Zener Diodes, Dual PRIMERY CHARACTERISTICS PARAMETER VALUE UNIT range nom.. to V Test current T specification Pulse current FEATURES Dual silicon planar Zener diodes, common

More information

FEATURES. Note 138D 306 X0 006 C 2 E3 MODEL CAPACITANCE CAPACITANCE TOLERANCE DC VOLTAGE RATING AT +85 C

FEATURES. Note 138D 306 X0 006 C 2 E3 MODEL CAPACITANCE CAPACITANCE TOLERANCE DC VOLTAGE RATING AT +85 C Wet Tantalum Capacitors Silver Case TANTALEX Capacitors Hermetically-Sealed FEURES Terminations: axial, standard tin / lead (SnPb), 100 % tin (RoHS-compliant) available Available Model is the commercial

More information

Surface Mount Multilayer Ceramic Chip Capacitors for Ultra Small Commodity Applications

Surface Mount Multilayer Ceramic Chip Capacitors for Ultra Small Commodity Applications Surface Mount Multilayer Ceramic Chip Capacitors for Ultra Small Commodity Applications FEATURES High capacitance in unit size High precision dimensional tolerances Suitably used in high-accuracy automatic

More information

RF Power Feed-Through Capacitors with Conductor Rod, Class 1 Ceramic

RF Power Feed-Through Capacitors with Conductor Rod, Class 1 Ceramic DB 030088, DB 03000 RF Power Feed-Through Capacitors with Conductor Rod, Class Ceramic FEATURES Small size Geometry minimizes inductance Wide range of capacitance values APPLICATIONS Filtering purposes

More information

RF Power Plate Capacitors for Higher Voltages, Class 1 Ceramic

RF Power Plate Capacitors for Higher Voltages, Class 1 Ceramic RF Power Plate Capacitors for Higher Voltages, Class Ceramic FEATURES Low losses High reliability High voltage ratings APPLICATIONS These high quality power plate capacitors are designed for usage in high

More information

Solid-Electrolyte TANTALEX Capacitors, Hermetically Sealed, Axial-Lead, CECC Approved

Solid-Electrolyte TANTALEX Capacitors, Hermetically Sealed, Axial-Lead, CECC Approved Solid-Electrolyte TANTALEX Capacitors, Hermetically Sealed, Axial-Lead, CECC Approved PERFORMANCE CHARACTERISTICS Operating Temperature: -55 C to +85 C (types CTS13) -55 C to +125 C (types CTS1, 749DX)

More information

Standard Carbon Film Leaded Resistors

Standard Carbon Film Leaded Resistors Standard Carbon Film Leaded Resistors FEATURES Securely bonded carbon film Good moisture resistance ( R max. ±.5 % R) Good long term stability ( R max. ±.5 % R, for h) Low noise (refer to graph) Suitable

More information

Aluminum Capacitors FEATURES APPLICATIONS PACKAGING

Aluminum Capacitors FEATURES APPLICATIONS PACKAGING Aluminum Capacitors QUICK REFERENCE DATA DESCRIPTION VALUE Nominal case size (Ø D x L in mm) 4 x 5.3 to 12.5 x 13.5 Rated capacitance range, 10 μf to 2200 μf Capacitance tolerance ± 20 % Rated voltage

More information

Aluminum Capacitors SMD (Chip), High Temperature

Aluminum Capacitors SMD (Chip), High Temperature Not Recommended for New Designs, Use 50 CR Aluminum Capacitors SMD (Chip), High Temperature 50 CL 53 CRV Lead (Pb)-free 40 CLH 5 C high temperature 53 CLV Fig. low 50 CL QUICK REFERENCE DATA DESCRIPTION

More information

Aluminum Electrolytic Capacitors SMD (Chip) Long Life Vertical

Aluminum Electrolytic Capacitors SMD (Chip) Long Life Vertical Aluminum Electrolytic Capacitors SMD (Chip) Long Life Vertical FEATURES Polarized aluminum electrolytic capacitors, non-solid electrolyte, self healing SMD-version with base plate, vertical construction

More information

Surface Mount Multilayer Ceramic Chip Capacitor Solutions for High Voltage Applications

Surface Mount Multilayer Ceramic Chip Capacitor Solutions for High Voltage Applications Surface Mount Multilayer Ceramic Chip Capacitor Solutions for High Voltage Applications ELECTRICAL SPECIFICATIONS X7R GENERAL SPECIFICATION Note Electrical characteristics at +25 C unless otherwise specified

More information

Aluminum Capacitors FEATURES APPLICATIONS PACKAGING

Aluminum Capacitors FEATURES APPLICATIONS PACKAGING Aluminum Capacitors FEATURES Load life: 2000 h at 105 C Extra low impedance, high ripple current Polarized SMD aluminum electrolytic capacitors, non solid electrolyte Material categorization: for definitions

More information

Aluminum Capacitors SMD (Chip) Long Life Vertical

Aluminum Capacitors SMD (Chip) Long Life Vertical Aluminum Capacitors SMD (Chip) Long Life Vertical FEATURES Polarized aluminum electrolytic capacitors, non-solid electrolyte, self healing SMD-version with base plate, vertical construction requiring minimum

More information

Lead (Pb)-Bearing Thick Film, Rectangular High Value Chip Resistor

Lead (Pb)-Bearing Thick Film, Rectangular High Value Chip Resistor Lead (Pb)-Bearing Thick Film, Rectangular High Value Chip Resistor FEATURES High resistance values (up to 470M) Suitable for voltage dividers and hybrids Lead (Pb)-bearing termination plating on Ni barrier

More information

Aluminum Capacitors SMD (Chip) Long Life Vertical

Aluminum Capacitors SMD (Chip) Long Life Vertical Not for New Designs - Alternative Device: 53 CRV 53 CLV 40 CLH FEATURES Polarized aluminum electrolytic capacitors, non-solid electrolyte, self healing SMD-version with base plate, vertical construction

More information

Metallized Polypropylene Capacitor, Mini-Version (-M) Related Document: CECC

Metallized Polypropylene Capacitor, Mini-Version (-M) Related Document: CECC MKP 840.../...-M Metallized Polypropylene Capacitor, Mini-Version (-M) Related Document: CECC 00 0.6 pcm ± 0.4 Dimensions in millimeters MAIN APPLICATIONS High frequency and pulse operations. Deflection

More information

Lead (Pb)-Free Thick Film, Rectangular High Value Chip Resistor

Lead (Pb)-Free Thick Film, Rectangular High Value Chip Resistor Lead (Pb)-Free Thick Film, Rectangular High Value Chip Resistor FEATURES High resistance values (up to 470M) Suitable for voltage dividers and hybrids Pure tin plating provides compatibility with lead

More information

Ceramic Disc Capacitors Class 1, 3 kv DC

Ceramic Disc Capacitors Class 1, 3 kv DC S Series Ceramic Disc Capacitors D D FEATURES Low losses High stability Tangent line SH Tangent line SH High capacitance in small size Kinked (preferred) or straight leads Compliant to RoHS directive 2002/095/EC

More information

Small Signal Zener Diodes

Small Signal Zener Diodes Small Signal Zener Diodes DESIGN SUPPORT TOOLS click logo to get started FEATURES Very sharp reverse characteristic Low reverse current level Available with tighter tolerances Very high stability Low noise

More information

RF Power Pot Capacitors with Mounting Tags, Class 1 Ceramic

RF Power Pot Capacitors with Mounting Tags, Class 1 Ceramic T. 045090, T. 04520, T. 04550 RF Power Pot Capacitors with Mounting Tags, Class Ceramic FEATURES High reliability Multiple terminals Wide range of capacitance values APPLICATIONS Induction and dielectric

More information

Surface Mount Power Resistor Thick Film Technology

Surface Mount Power Resistor Thick Film Technology Surface Mount Power Resistor Thick Film Technology DESIGN SUPPORT TOOLS click logo to get started Models Available FEATURES AEC-Q200 qualified 35 W at 25 C case temperature Surface mounted resistor - TO-263

More information

Wet Tantalum Capacitors, High Energy, Ultra High Capacitance, -55 C to +125 C Operation

Wet Tantalum Capacitors, High Energy, Ultra High Capacitance, -55 C to +125 C Operation Wet Tantalum Capacitors, High Energy, Ultra High Capacitance, -55 C to +125 C Operation FEATURES High energy, very high capacitance design All tantalum, hermetically sealed case Utilizes proven SuperTan

More information

Aluminum Electrolytic Capacitors Axial Standard

Aluminum Electrolytic Capacitors Axial Standard 00/0 AS Aluminum Electrolytic Capacitors Axial Standard 04/04 ASH high voltage 00/0 AS smaller dimensions 0 ASM Fig. QUICK REFERENCE DATA DESCRIPTION VALUE Nominal case sizes (Ø D x L in mm) 4.5 x 0 to

More information

SMD Aluminum Solid Capacitors with Conductive Polymer

SMD Aluminum Solid Capacitors with Conductive Polymer SMD Aluminum Solid Capacitors with Conductive Polymer FEATURES New OS-CON series provides improved characteristics with up to 25 C temperature capability and 35 V maximum voltage rating in a SMD package

More information

FEATURES. Heatsink. 1 2 Pin 1 Pin 2

FEATURES. Heatsink. 1 2 Pin 1 Pin 2 Ultralow V F Ultrafast Rectifier, 8 A FRED Pt esmp Series 2 SlimDPAK (TO-252AE) k Heatsink k 2 Pin Pin 2 FEATURES Ultrafast recovery time, extremely low V F and soft recovery For PFC CCM operation Low

More information

Small Signal Fast Switching Diode

Small Signal Fast Switching Diode Small Signal Fast Switching Diode MECHANICAL DATA Case: SOD- Weight: approx.. mg Packaging codes/options: 8/K per " reel (8 mm tape), K/box 08/K per 7" reel (8 mm tape), K/box FEATURES Silicon epitaxial

More information

Optocoupler, Phototransistor Output, no Base Connection

Optocoupler, Phototransistor Output, no Base Connection Optocoupler, Phototransistor Output, no Base Connection FEATURES A C NC 1 2 3 6 5 4 NC C E Isolation test voltage, 5 V RMS No base terminal connection for improved common mode interface immunity Long term

More information

50 W Power Resistor, Thick Film Technology, TO-220

50 W Power Resistor, Thick Film Technology, TO-220 50 W Power Resistor, Thick Film Technology, TO-220 DESIGN SUPPORT TOOLS click logo to get started FEATURES 50 W at 25 C heatsink mounted Adjusted by sand trimming Leaded or surface mount versions High

More information

Wet Tantalum Capacitors, High Energy, Ultra High Capacitance, -55 C to +125 C Operation

Wet Tantalum Capacitors, High Energy, Ultra High Capacitance, -55 C to +125 C Operation Wet Tantalum Capacitors, High Energy, Ultra High Capacitance, -55 C to +125 C Operation FEATURES High energy, very high capacitance design All tantalum, hermetically sealed case Available Utilizes proven

More information

Aluminum Electrolytic Capacitors Axial High Temperature High Voltage for E.L.B.

Aluminum Electrolytic Capacitors Axial High Temperature High Voltage for E.L.B. Aluminum Electrolytic Capacitors Axial High Temperature High Voltage for E.L.B. 04-043 ASH standard 04/043 AHH-ELB 550 V/4 h Fig. 85 C 04/043 AMH-ELB 550 V/4 h FEATURES Useful life: 0 000 h at 05 C Stable

More information

RF Power Pot Capacitors with Mounting Tags, Class 1 Ceramic

RF Power Pot Capacitors with Mounting Tags, Class 1 Ceramic RF Power Pot Capacitors with Mounting Tags, Class Ceramic FEATURES Small size High reliability Wide range of capacitance values APPLICATIONS Induction and dielectric heating Antenna units Filter, bypass,

More information

Parameter Test condition Symbol Value Unit. Mounted on epoxy-glass hard tissue, fig µm copper clad, 0.9 mm 2 copper area per electrode

Parameter Test condition Symbol Value Unit. Mounted on epoxy-glass hard tissue, fig µm copper clad, 0.9 mm 2 copper area per electrode Small Signal Zener Diodes Features Saving space Hermetic sealed parts Electrical data identical with the devices BZT55..Series/TZM..Series Fits onto SOD-323/SOD- footprints Very sharp reverse characteristic

More information

Pulse Proof Thick Film Chip Resistors

Pulse Proof Thick Film Chip Resistors Pulse Proof Thick Film Chip Resistors FEATURES High pulse performance, up to kw Stability R/R 1 % for 00 h at 70 C AEC-Q200 qualified Material categorization: for definitions of compliance please see www.vishay.com/doc?99912

More information

Surface Mount Multilayer Ceramic Chip Capacitors for High Q Commodity Applications

Surface Mount Multilayer Ceramic Chip Capacitors for High Q Commodity Applications VJ...WBC High Q Dielectric Surface Mount Multilayer Ceramic Chip Capacitors for High Q Commodity Applications ELECTRICAL SPECIFICATIONS Note Electrical characteristics at 25 C, 30 % to 70 % related humidity,

More information

Aluminum Capacitors C, Miniature, Radial Lead

Aluminum Capacitors C, Miniature, Radial Lead FEATURES Original SMPS output capacitors Minimal ESR change High ripple current capability Fig.1 Component outline QUICK REFERENCE DATA DESCRIPTION Nominal case size Ø D x L in mm VALUE 0.394" x 0.472"

More information

Two-Line ESD Protection in SOT-23

Two-Line ESD Protection in SOT-23 Two-Line ESD Protection in 2 3 20456 MARKING (example only) YYY = type code (see table below) XX = date code 1 XX YYY XX 20512 20357 1 FEATURES Two-line ESD-protection device ESD-protection acc. IEC 61000-4-2

More information

Surface Mount Multilayer Ceramic Chip Capacitors with Integrated Resistor for High Pulse Current Applications

Surface Mount Multilayer Ceramic Chip Capacitors with Integrated Resistor for High Pulse Current Applications Surface Mount Multilayer Ceramic Chip Capacitors with Integrated Resistor for High Pulse Current Applications FEATURES Integrated resistor on the surface of the Available capacitor Low electrostrictive

More information

5 mm Square Surface Mount Miniature Trimmers Multi-Turn Cermet Sealed

5 mm Square Surface Mount Miniature Trimmers Multi-Turn Cermet Sealed 5 mm Square Surface Mount Miniature Trimmers Multi-Turn Cermet Sealed DESIGN SUPPORT TOOLS Models Available click logo to get started FEATURES 0.5 W at 70 C Professional and industrial grade Wide ohmic

More information

Axial Leaded Multilayer Ceramic Capacitors for Automotive Applications Class 1 and Class 2, 50 V DC, 100 V DC, 200 V DC

Axial Leaded Multilayer Ceramic Capacitors for Automotive Applications Class 1 and Class 2, 50 V DC, 100 V DC, 200 V DC Axial Leaded Multilayer Ceramic Capacitors for Automotive Applications Class 1 and Class 2, 50 V DC, 100 V DC, 200 V DC FEATURES AEC-Q200 qualified with PPAP available High reliability MLCC insert with

More information

Metal Film, Cylindrical Resistors

Metal Film, Cylindrical Resistors NOT FOR NEW DESIGNS Metal Film, Cylindrical Resistors FEATURES Stable metal film on high quality ceramic Very low TC and tight tolerances Excellent stability at different environmental conditions Pure

More information

Cemented Wirewound Precision Resistors

Cemented Wirewound Precision Resistors FEATURES High power dissipation in small volume Ideal for pulse application TCR ± 100 ppm/k Maximum permissible hot spot temperature is 275 C ead (Pb)-free Tolerance 1 % Compliant to RoHS Directive 2002/95/EC

More information

Aluminum Electrolytic Capacitors Radial, Enhanced High Temperature, Low Impedance

Aluminum Electrolytic Capacitors Radial, Enhanced High Temperature, Low Impedance Aluminum Electrolytic Capacitors Radial, Enhanced High Temperature, Low Impedance 40 RTM lower Z longer life 25 C 50 C 50 RMI 46 RTI Fig. QUICK REFERENCE DATA DESCRIPTION VALUE Nominal case sizes (Ø D

More information

Power Resistor Thick Film Technology

Power Resistor Thick Film Technology Power Resistor Thick Film Technology DESIGN SUPPORT TOOLS click logo to get started FEATURES 50 W at 25 C case temperature heatsink mounted Direct mounting ceramic on heatsink Broad resistance range: 0.010

More information

Fusible Carbon Film MELF Resistors

Fusible Carbon Film MELF Resistors Fusible Carbon Film MELF Resistors FEATURES Fusible resistor for constant voltage designed for overload protection Special trimming to provide the fusing characteristic Flame retardant coating Pure tin

More information

Platinum SMD Flat Chip Temperature Sensor

Platinum SMD Flat Chip Temperature Sensor Platinum SMD Flat Chip Temperature Sensor FEATURES Standardized characteristics according to IEC 60751 Advanced thin film technology Short reaction times down to t 0.9 2 s (in air) Outstanding stability

More information

TELUX LED FEATURES. COLOR TEMPERATURE FORWARD VOLTAGE (mlm) at I F (V)

TELUX LED FEATURES. COLOR TEMPERATURE FORWARD VOLTAGE (mlm) at I F (V) 16 012 DESCRIPTION The TELUX series is a clear, non diffused LED for high end applications where supreme luminous flux is required. It is designed in an industry standard 7.62 mm square package utilizing

More information

Metallized Polyester Film Capacitor Related Document: IEC

Metallized Polyester Film Capacitor Related Document: IEC Metallized Polyester Film Capacitor Related Document: IEC 6084- MKT 8 Dimensions in millimeters Ø d FEATURES Product is completely lead (Pb)-free Product is RoHS compliant 40.0 ±.0 L 40.0 ±.0 Max. d D

More information

Aluminum Electrolytic Capacitors SMD (Chip), High Temperature, Low Impedance High Vibration Capability

Aluminum Electrolytic Capacitors SMD (Chip), High Temperature, Low Impedance High Vibration Capability Aluminum Electrolytic Capacitors SMD (Chip), High Temperature, Low Impedance High Vibration Capability FEATURES Useful life: up to 2000 h at 50 C High reliability Low ESR Polarized aluminum electrolytic

More information

Power Resistor for Mounting onto a Heatsink Thick Film Technology

Power Resistor for Mounting onto a Heatsink Thick Film Technology Power Resistor for Mounting onto a Heatsink Thick Film Technology FEATURES LPS high power: 1100 W Wide resistance range: 1 to 1.3 k E24 series Non inductive Easy mounting Low thermal radiation of the case

More information

Small Signal Fast Switching Diode

Small Signal Fast Switching Diode Small Signal Fast Switching Diode MECHANICAL DATA Case: SOD- Weight: approx.. mg Packaging codes/options: 8/K per " reel (8 mm tape), K/box 08/K per 7" reel (8 mm tape), K/box FEATURES Silicon epitaxial

More information

Aluminum Capacitors Power Standard Miniature Snap-In

Aluminum Capacitors Power Standard Miniature Snap-In Aluminum Capacitors Power Standard Miniature Snap-In Fig. QUICK REFERENCE DATA DESCRIPTION / PUM-SI smaller dimensions 0/0 PSM-SI long life 0 C Note () A 0 V range is available on request 0/0 PLL-SI VALUE

More information

Cemented Wirewound Resistors

Cemented Wirewound Resistors FEATURES All welded construction Ceramic core Non-flammable cement coating Tinned copper-clad iron leads (for axial parts) High power dissipation in small volume Ideal for pulse application ead (Pb)-free

More information

Small Signal Zener Diodes

Small Signal Zener Diodes Small Signal Zener Diodes PRIMARY CHARACTERISTICS PARAMETER VALUE UNIT V Z range nom. 2.4 to 75 V Test current I ZT 2.5; 5 ma V Z specification Pulse current Int. construction Single FEATURES Saving space

More information

Aluminum Electrolytic Capacitors Axial Miniature, Long-Life

Aluminum Electrolytic Capacitors Axial Miniature, Long-Life Aluminum Electrolytic Capacitors Axial Miniature, Long-Life 38 AML 0 ASM smaller dimensions Fig. QUICK REFERENCE DATA DESCRIPTION Nominal case sizes (Ø D x L in mm) 6.3 x.7 to 0 x 5 VALUE 0 x 30 to x 38

More information

Lead (Pb)-Bearing Thick Film, Rectangular Chip Resistors

Lead (Pb)-Bearing Thick Film, Rectangular Chip Resistors FEATURES Stability ΔR/R = 1 % for 00 h at 70 C Lead (Pb)-bearing termination plating on Ni barrier layer Metal glaze on high quality ceramic Halogen-free according to IEC 61249-2-21 definiton AEC-Q200

More information

Aluminum Electrolytic Capacitors Power Long Life Snap-In

Aluminum Electrolytic Capacitors Power Long Life Snap-In Aluminum Electrolytic Capacitors Power Long Life Snap-In PUL-SI smaller dimensions 0/0 PLL-SI Fig. QUICK REFERENCE DATA DESCRIPTION VALUE 0 0 Nominal case sizes (Ø D x L in mm) x to x 0 Rated capacitance

More information

Small Signal Zener Diodes

Small Signal Zener Diodes Small Signal Zener Diodes PRIMARY CHARACTERISTICS PARAMETER VALUE UNIT V Z range nom. 2.4 to 75 V FEATURES Very sharp reverse characteristic Low reverse current level Very high stability Low noise TZMC-

More information

30 W Power Resistor Thick Film Technology

30 W Power Resistor Thick Film Technology 30 W Power Resistor Thick Film Technology LTO series are the extension of RTO types. We used the direct ceramic mounting design (no metal tab) of our RCH power resistors applied to semiconductor packages.

More information

Aluminum Electrolytic Capacitors SMD (Chip), Very Low Z, High Vibration Capability

Aluminum Electrolytic Capacitors SMD (Chip), Very Low Z, High Vibration Capability Aluminum Electrolytic Capacitors SMD (Chip), Very Low Z, High Vibration Capability FEATURES Extended useful life: up to 0 000 h at 05 C Polarized aluminum electrolytic capacitors, non-solid electrolyte,

More information

Small Signal Fast Switching Diode

Small Signal Fast Switching Diode Small Signal Fast Switching Diode MECHANICAL DATA Case: SOD- FL Weight: approx. 9. mg Packaging codes/options: 08/K per 7" reel (8 mm tape), 8K/box FEATURES Silicon epitaxial planar diode Fast switching

More information

Aluminum Electrolytic Capacitors SMD (Chip), High Temperature, Low Impedance, High Vibration Capability

Aluminum Electrolytic Capacitors SMD (Chip), High Temperature, Low Impedance, High Vibration Capability Aluminum Electrolytic Capacitors SMD (Chip), High Temperature, Low Impedance, High Vibration Capability FEATURES Extended useful life: up to 6000 h at 25 C Polarized aluminum electrolytic capacitors, non-solid

More information

High Current Density Surface Mount Trench MOS Barrier Schottky Rectifier

High Current Density Surface Mount Trench MOS Barrier Schottky Rectifier VP0 High Current Density Surface Mount Trench MOS Barrier Schottky Rectifier Ultra Low V F = 0.43 V at I F = 5 A TMBS esmp Series TO-77A (SMPC) Anode Cathode Anode FEATURES Very low profile - typical height

More information

Wet Tantalum Capacitor, Button Assembly or Array, All-Tantalum Case, - 55 C to 125 C Operation

Wet Tantalum Capacitor, Button Assembly or Array, All-Tantalum Case, - 55 C to 125 C Operation Wet Tantalum Capacitor, Button Assembly or Array, All-Tantalum Case, - 55 C to 5 C Operation FEATURES All-Tantalum electrodes eliminate silver migration Withstands high ripple current Long life reliability

More information

Silicon PIN Photodiode

Silicon PIN Photodiode Silicon PIN Photodiode DESCRIPTION VBPW34S VBPW34SR 21733 VBPW34S and VBPW34SR are high speed and high sensitive PIN photodiodes. It is a surface mount device (SMD) including the chip with a 7.5 mm 2 sensitive

More information

Aluminum Electrolytic Capacitors Power Standard Miniature Snap-In

Aluminum Electrolytic Capacitors Power Standard Miniature Snap-In Aluminum Electrolytic Capacitors Power Standard Miniature Snap-In Fig. QUICK REFERENCE DATA DESCRIPTION / PUM-SI smaller dimensions 0/0 PSM-SI long life 0 C Note () A 0 V range is available on request

More information

Cemented Wirewound Resistors

Cemented Wirewound Resistors Cemented Wirewound Resistors STANDARD EECTRICA SPECIFICATIONS MODE POWER RATING P 40 C W POWER RATING P 70 C W IMITING VOTAGE U max. RESISTANCE RANGE () TCR = - 0 ppm/k to - 80 ppm/k FEATURES All welded

More information

Resin-Coated, Radial-Lead Solid Tantalum Capacitors

Resin-Coated, Radial-Lead Solid Tantalum Capacitors Resin-Coated, Radial-Lead Solid Tantalum Capacitors ELECTRICAL CHARACTERISTICS Operating Temperature: -55 C to +85 C: type 489D -55 C to +125 C (above 85 C, voltage derating is required): type 499D FEATURES

More information

Aluminum Electrolytic Capacitors Power Long Life Snap-In

Aluminum Electrolytic Capacitors Power Long Life Snap-In Aluminum Electrolytic Capacitors Power Long Life Snap-In PUL-SI smaller dimensions 0/0 PLL-SI Fig. QUICK REFERENCE DATA DESCRIPTION VALUE 0 0 Nominal case sizes (Ø D x L in mm) x to x 0 Rated capacitance

More information

Lead (Pb)-free Thick Film, Rectangular Commodity Chip Resistors

Lead (Pb)-free Thick Film, Rectangular Commodity Chip Resistors Lead (Pb)-free Thick Film, Rectangular Commodity Chip Resistors FEATURES High volume product suitable for commercial applications Stability ( R/R 1 % for 1000 h at 70 C) Lead (Pb)-free solder contacts

More information

Power Resistor Thick Film Technology

Power Resistor Thick Film Technology Power Resistor Thick Film Technology LTO series are the extension of RTO types. We used the direct ceramic mounting design (no metal tab) of our RCH power resistors applied to semiconductor packages. FEATURES

More information

Silicon PIN Photodiode, RoHS Compliant

Silicon PIN Photodiode, RoHS Compliant Silicon PIN Photodiode, RoHS Compliant DESCRIPTION 948642 is a high sensitive silicon planar photodiode in a standard TO-18 hermetically sealed metal case with a glass lens. A precise alignment of the

More information

Aluminum Electrolytic Capacitors Radial Miniature Long Life

Aluminum Electrolytic Capacitors Radial Miniature Long Life Aluminum Electrolytic Capacitors Radial Miniature Long Life 6 RLL lower CV-values RMH high voltage longer life 6 RVI miniaturized 0 RMI lower miniaturized 8 RUS Fig. QUICK REFERENCE DATA DESCRIPTION VALUE

More information

Trench MOS Barrier Schottky Rectifier for PV Solar Cell Bypass Protection

Trench MOS Barrier Schottky Rectifier for PV Solar Cell Bypass Protection Trench MOS Barrier Schottky Rectifier for PV Solar Cell Bypass Protection Ultra Low V F = 0.3 V at I F = 5 A TMBS esmp Series FEATURES Trench MOS Schottky technology Very low profile - typical height of.7

More information

Aluminum Electrolytic Capacitors Radial Miniature, Low Impedance

Aluminum Electrolytic Capacitors Radial Miniature, Low Impedance Aluminum Electrolytic Capacitors Radial Miniature, Low Impedance 36 RVI miniaturize FEATURES Very long useful life: 4000 h to 0 000 h at 05 C, high stability, high reliability Very low impedance and low

More information

Hermetically Sealed, Axial-Lead to CECC Specifications

Hermetically Sealed, Axial-Lead to CECC Specifications Hermetically Sealed, Axial-Lead CTS1, CTS13, 749DX FEATURES Terminations: Tin/lead (SnPb), 100 % tin (RoHS compliant) Hermetically sealed metal case with plastic film insulation Extended capacitance range

More information

Aluminum Electrolytic Capacitors Power Economic Printed Wiring

Aluminum Electrolytic Capacitors Power Economic Printed Wiring Aluminum Electrolytic Capacitors Power Economic Printed Wiring 0/0 PECPW 00/0 PEDPW Fig. QUICK REFERENCE DATA DESCRIPTION high ripple current 0/0 PECPW long life 0 C Nominal case size (Ø D x L in mm) Rated

More information

Zener Diodes FEATURES APPLICATIONS

Zener Diodes FEATURES APPLICATIONS Zener Diodes SMA (DO-4AC) PRIMARY CHARACTERISTICS PARAMETER VALUE UNIT V Z range nom. 3.3 to 00 V Test current I ZT.7 to 80 ma V BR 5. to 95 V V WM 4.7 to 90 V P PPM 40 W T J max. 50 C V Z specification

More information

Small Signal Fast Switching Diode FEATURES PART ORDERING CODE INTERNAL CONSTRUCTION TYPE MARKING REMARKS

Small Signal Fast Switching Diode FEATURES PART ORDERING CODE INTERNAL CONSTRUCTION TYPE MARKING REMARKS Small Signal Fast Switching Diode MARKING (example only) Bar = cathode marking XY = type code X Y 6 MECHANICAL DATA Case: SOD- Weight: approx.. mg Packaging codes/options: 8/K per " reel (8 mm tape), K/box

More information

Surface Mount Multilayer Ceramic Chip Capacitors Prohibit Surface Arc-Over in High-Voltage Applications

Surface Mount Multilayer Ceramic Chip Capacitors Prohibit Surface Arc-Over in High-Voltage Applications Surface Mount Multilayer Ceramic Chip Capacitors Prohibit Surface Arc-Over in High-Voltage Applications ELECTRICAL SPECIFICATIONS FEATURES For this Worldwide Patented Technology Specialty: high-voltage

More information

Lead (Pb)-Free Thick Film, Rectangular, Trimmable Chip Resistors

Lead (Pb)-Free Thick Film, Rectangular, Trimmable Chip Resistors Lead (Pb)-Free Thick Film, Rectangular, Trimmable Chip Resistors STANDARD ELECTRICAL SPECIFICATIONS MODEL CASE SIZE INCH CASE SIZE METRIC POWER RATING P 70 W LIMITING ELEMENT VOLTAGE Umax. AC RMS /DC V

More information

Small Signal Zener Diodes, Dual

Small Signal Zener Diodes, Dual Small Signal Zener Diodes, Dual DESIGN SUPPORT TOOLS Models Available PRIMARY CHARACTERISTICS 6 PARAMETER VALUE UNIT range nom.. to V Test current T specification Pulse current Circuit configuration Dual

More information

Electrical Double Layer Energy Storage Capacitors Up to 3 V Operating Voltage

Electrical Double Layer Energy Storage Capacitors Up to 3 V Operating Voltage Electrical Double Layer Energy Storage Capacitors Up to 3 V Operating Voltage FEATURES Polarized energy storage capacitor with high capacity and energy density Rated voltage: 3.0 V Available in through-hole

More information