Plastic Film Capacitors. Metallized Polypropylene Film Capacitor E C W F D E C W F D

Transcription

1 Metallized Polypropylene Film Capacitor Type : ECWFD Non-inductive construction using metalized Polypropylene film with flame retardant epoxy resin coating. Features Small size Excellent frequency characteristics Low loss Flame-retardant epoxy resin coating Low Hum Sound Noise RoHS directive compliant Recommended Applications Activ filter circuits High frequency and high current circuits Explanation of Part Numbers Standard Product E C W F D Product code Specifications Dielectric & construction 2W Rated vol. Capacitance Cap. Tol. 5 VDC Short Lead Space Product (.7 µf,.68 µf,1. µf) J ±5 % K ±1 % E C W F D Product code Dielectric & construction 2W Rated vol. Capacitance VDC Category temp. range to 11 (Including temperature-rise on unit surface) 5 VDC (Derating of rated voltage by.62%/ C at more than 85 C Rated voltage Peak to peak voltage applied on the capacitor should be less than 2Vp-p, and zero to peak voltage should be less than 5V. Capacitance range.1 µf to.7 µf Capacitance tolerance 5 %(J), 1 %(K) Withstand voltage Between terminals:rated voltage (VDC) 15 % 6 s Dissipation factor (tan ) tan.1 % (2 C,1 khz) Insulation resistance (IR) C. µf:ir M (2, VDC,6 s) C. µf:ir MµF In case of applying voltage in alternating current (5 Hz or 6 Hz sine wave) to a capacitor with DC rated voltage, please refer to the page of Permissible voltage (R.M.S) in alternating current corresponding to DC rated voltage. P Cap. Tol. 5 1 Blank B C 1 B C Lead Form Straight Cut lead Crimped taping (Ammo) Odd size taping Lead Form Straight Cut lead Crimped taping (Ammo) Odd size taping

2 Dimensions in mm (not to scale) (Dimensions : mm) Packaging Specification for Bulk Package Packing quantity: pcs./bag Taping Specifications for Automatic Insertion Taping style Style AB Style E Style F Packaging Specifications ECWFD 5 VDC Refer to the page of taping specifications. (μf) AD AS AB B C D E F.1 to.9.7,.68, 1. P/.1 to.9.7,.68, 1. P/.7 to 2.2 Lead Spacing AB 5. mm E 7.5 mm F 7.5 mm

3 Rating, Dimensions& uantity/ammo Box Type ECWFD Rated voltage : 5 VDC Part No. Cap. (μf) L max T max Straight H max. ( B) Dimensions (mm) ( ) ( B) ( ) Min. order 'ty Taping Bulk Crimped 5.mm 7.5mm Straight lead ECWFD2W1( ) ECWFD2W12( ) ECWFD2W15( ) ECWFD2W18( ) ECWFD2W22( ) ECWFD2W27( ) ECWFD2W( ) ECWFD2W9( ) ECWFD2W7 P ( ) ECWFD2W7 ( ) ECWFD2W7( ) ECWFD2W56( ) ECWFD2W68 P ( ) ECWFD2W68 ( ) ECWFD2W68( ) ECWFD2W82( ) ECWFD2W15 P ( ) ECWFD2W15 ( ) ECWFD2W15( ) ECWFD2W125( ) ECWFD2W155( ) ECWFD2W185( ) ECWFD2W225( ) ECWFD2W275( ) ECWFD2W5( ) ECWFD2W95( ) ECWFD2W75( ) for lead crimped Capacitance tolerance code F S G max. d Note) Part Number marked with is Short Lead Space Product.

4 ECWFD Type DC5V series Electrical Characteristics <Typical Data > (Metallized Polypropylene Film) Temperature Characteristics Frequency Characteristics 1 at 1kHz 1 Capacitance change(%) 5-5 Capacitance change(%) at 1kHz 1 Insulation resistance(ohm) Dissipation factor(%) E+1 at DCV 1.E+1 1.E+12 1.E+11 1.E+1 1.E+9 1.E+8 1.E Impedance(ohm) Dissipation factor(%)

5 ECWFD Type DC5V series Applicable Specifications (Metallized Polypropylene Film) 7. Permissible Current Permissible Permissible Current Derating Voltage by Temperature Effective value (Arms) 6..7μF μF. 2.7μF 1.μF(1pitch). 1.μF.68μF(1pitch).7μF(1pitch) 2..7μF 1..1μF. 1 Percentage Effective to the permissible value current to Temperature of capacitor surface ( ) Pulse Handling Capability (dv/dt) (Max cycles) Voltage Derating by Temperature Rated Voltage DC 5V Pitch (mm) Capacitance (μf) Code dv/dt (V/μs) Current (Ao-p) Percentage to the rated voltage (%) to Temperature of capacitor surface ( ) *Please consult Panasonic if your condition exceeds the above *P When you use this product, peak voltage must not exceed DC rated voltage. *The current(-p) value is calculated using nominal capacitance.