Amphenol MS/97 SERIES STANDARD CIRCULAR THREAD COUPLED SOLDER AND CRIMP CONNECTORS
|
|
- Homer Wilson
- 6 years ago
- Views:
Transcription
1 mphenol TO O. 0/0 /9 I T IU T OU O I OTO 9 I T IU YOT OU O I OTO
2 , 9 9 I Introduction mphenol and 9 series are two series of threadcoupled connectors designed to meet the operating requirements of I 0. vailable in a variety of styles and classes, these connectors are primarily used in a range of military and industrial applications where specific degrees of environmental protection are required. lthough both and 9 series have identical insert arrangements and other similar component parts, the two series differ in that mphenol series of connectors are also qualified to meet the operating requirements of efence tandard oint ervices pecification 0, issued by the lectronics omponents tandardization Organisation (O). mphenol 9 series is exclusively designed to meet the needs of industry, which may call for deviations from I specification. mphenol 9 connectors feature a quick mating bayonet coupling with an audible full mating feature. This series uses the same I0 insert patterns and are used in high shock and vibration environments encountered in commercial, geophysical, aerospace, ground support and shipboard applications. age ontents Introduction onnector styles eneral description lectrical data Insert orientations s hell types ack accessories Other accessories Ordering s, 9 and 9 series connectors acts & igures O ITOT II T. T.
3 , 9 9 I onnector styles lass (lass w/o cableclamp) lass lass lass and lass cable clamp back shell O ITOT II T. T.
4 , 9 9 I onnector styles grommet sleeve grommet O ITOT II T. T.
5 , 9 9 I lass (lass w/o cableclamp) lass lass lass lass cable clamp back shell
6 , 9 9 I grommet sleeve grommet O ITOT II T. T.
7 , 9 9 I eneral description These electrical connectors are designated because the interchangeability and operating characteristics are determined by U.. ilitary pecifications. These specifications are revised from time to time to incorporate performance requirements dictated by design advances and more stringent requirements of allied equipment. The several designations of, 9 and 9 connectors meet different requirements of I 0. These designations and general descriptions are as follows : hell hell constructions include solid back shell () and environmental resistant (, & ). nvironmental resistant connectors provide a moisture barrier and assure a positive seal. hell styles consist of wall type receptacles (00), cable receptacles (0), box receptacles (0), straight plugs (0) and angle plugs (0). hell hardware is manufactured from aluminium alloy and cadmium plated with olive drab chromate finish. This finish has excellent conductivity; it is nonreflecting and corrosion resistant. lack anodised finish and cadmiumfree zinc plating with olive drab chromate finish are also available. or details, contact factory. ontacts in and socket contacts are of brass and generally silver plated. old plating is also available. or details contact factory. These contacts are available for solder or crimp termination. pecial arrangements of contacts for premating and preearth are also available. Inserts and grommet ynthetic inserts and grommet manufactured according to I0, offer high dielectric strength and are resistant to oils, gasoline and low temperature. 9 series inserts use iallyl hthalate ( lue ). is dimensionally stable, has high arc resistance and high insulation resistance under both humidity and thermal stress. eneraldescription lugs are available in, and types. eceptacles are available in,, and types. solid backshell Intended for general service usage to provide convenient means of connecting and disconnecting electrical circuits in industrial and military applications. nvironmental resisting Intended for use where the connector will be subject to heavy condensation and rapid changes in temperature or pressure and/or where the connector is subjected to high vibratory conditions. nvironmental resisting with grommet seal and strain relief backshell except for 0 type. nvironmental resisting with grommet seal, strain relief backshell and front gasket seal for plug type. nvironmental resisting with grommet seal, shorter and lightweight.
8 , 9 9 I lectrical data ielectric strength Inst. Test oltage ac rms ontact rating ontact ize ated urrent ontact esistance miliohms Operating oltage at ea evel Operating oltage at ea evel Inst O ITOT II T. T.
9 , 9 9 I Insert orientations To avoid crossplugging problems in applications requiring the use of more than one connector of the same size and arrangement, alternate insert rotations are available as indicated in the accompanying chart. s shown in the daigram below, the front face of the pin insert is rotated within the shell in a clockwise direction from the normal shell key. The socket insert would be rotated counterclockwise the same number of degrees with respect to the normal shell key. The following insert arrangements have the same alternate insert rotations for W,X,Y and Z which areasbelow:: egree W X Y Z W X osition W osition YY osition X osition ZZ iews looking into front face of pin insert or rear of socket insert Insert rrangement WW egrees X Y Z Insert rrangement W egrees X Y Z Insert rrangement 9 0 W egrees X Y Z
10 , 9 9 I O ITOT II T. T. 9 Insert rrangements Insert rrangement ontact ize / Inst Inst / / / / / / / / / / Inst ervice ating Total ontacts Insert rrangement ontact ize Inst Inst Inst Inst Inst Inst / Inst /Inst /Inst ervice ating Total ontacts Insert rrangement ontact ize Inst / / // // / / / / ///Inst // / / ervice ating Total ontacts
11 , 9 9 I s ront face of pin insert or rear of socket insert illustrated OTT 0 ontact size 0 ront of socket insert 0 ront of socket insert 0 ontact size Inst. Inst. Inst ontact size 0 00 rotation of 0 Inst rotation of ontact size 9 0 O ITOT II T. T.
12 /9 I s ront face of pin insert orrear of socket insert illustrated OTT 0 I ontact size 0,,,=;al.=Inst. 0 ontact size 9 Inst. ontact size 0 or I ontact size o 00 rotation of 9 Inst o rotation of,,,=;al.=inst. 0 O ITOT II T. T.
13 0 0 /9 I s ront face of pin insert or rear of socket insert illustrated OTT ontact size 9 0 rotation of rotation of or 0 ontact size 0,,,=;,,,= 0 Inst. 09 =;al.= 0 Inst. 0 0 I I ontact size 0 or 0 0 or I 0 00 I 0_ 00 rotation of 0 ontact size Inst. 0 O ITOT II T. T.
14 /9 I s ront face of pin insert or rear of socket insert illustrated OTT 0 T 0 0 ontact size 09 o 0 rotation of 0 00 Inst. 0 ontact size 0 ontact size 9 0 =;,,,= U T Y ontact size 9 =;,,,,= =;al.=,,,,=;,,= O ITOT II T. T.
15 / 9 I s ront face of pin insert or rear of socket insert illustrated OTT 0 ontact size or =;al.= or ontact size,,=;,,= =;al.=,,,=;,,= I O ontact size,,=;al.= O ITOT II T. T.
16 / 9 I s ront face of pin insert or rear of socket insert illustrated OTT 0 I ontact size 9 0 oror,,,=;,,= ontact size T U W X Y Z ontact size Inst.,,=;al.= O ITOT II T. T.
17 / 9 I s ront face of pin insert or rear of socket insert illustrated OTT 0 ontact size,,=;al.= U W X T I ontact size,=;=;al.= =;al.= a T a T T b b Z U Z U U d d T U W Y Y X Z a b c Y d e f g h X W X W j k l m 00 0 o 00 rotation of ontact size 0 O ITOT II T. T.
18 / 9 I s ront face of pin insert or rear of socket insert illustrated OTT 0 ontact size =;,,=;to= =;,,,,=;,=al.=inst. 9,=;,=;al.= 0 0 T U W X Y Z a b c d e f g h j k l m n p ontact size =;,,,= 0 0 O c d Y Z T U O I I a e b W X O T U W ontact size,,,=;al.= 0 O ITOT II T. T.
19 / 9 I s ront face of pin insert or rear of socket insert illustrated OTT 0 ontact size =;,= h I O T X U W Y Z a b c d e l f g j k n p u w v r s y y z m I O T Y U W X Z a b c d e f g h j m n p k r s t u v w x z y e d f Z a Y b c U W X T O I ontact size 0 xory Y O T U O T U O T U W X Y Z a b c W X Y Z a b c W X Y Z a b c d e f g h j k d e f g h j k d e f g h j k l m n p r s l m n p r s 0 0 l m n p r s t u v w x t u v w x t u v w x y z y z y z ontact size 0 o 00 rotation of 0 o 0 rotation of 0 O ITOT II T. T.
20 / 9 I s ront face of pin insert or rear of socket insert illustrated OTT 0 I d T c k U e j m b f h a W g Z X Y ontact size,,=;al.= =;al= 00 0 I O U W X Y Z a b T c I O U W X Y Z a b T c 00 0 d e Z a Y U O I h d e l f g m j k n p u w v r s y y z h 0 0 d e l f g m j k n p u w v r s y y z f b c W X T o 00 rotation of o 0 rotation of o 00 rotation of 9 ontact size 0 xory 0 xory T U W T U W X Y Z X Y Z a b c a b c d f g h i d e h j f g j k m n p q r s t u v w x k m y z ontact size 0 0 k O ITOT II T. T. 9
21 ,9 9 I hell types Wall mounting receptacle OUTI O.9 I. O IZ. I. O IZ.0 I. O OT Iz OI ll dimensions are in mm onnector ize 0 0 O / U / /0 U /0 U / / /0 U /0 U /0 U /0 UU 0 U /0 UU 0 U /0 UU /U UU /U / /U. /U / / /U /.00 U / /U /0 UU able connecting receptacle ll dimensions are in mm onnector ize 0 0 / UU /0 UU /0 UU /0 UU /0 U 0 UU 0 UU / UU // UU / UU / UU // UU UU // UU / / / /0 UU //0 UU /0 UU /0 UU 0 U / / / / 9/ /0 UU 0 O ITOT II T. T.
22 , 9 9 I hell types ox mounting receptacle OUTI O.9 I. O IZ. I. O IZ.0 I. O OT IZ ll dimensions are in mm onnector ize 0 0 /U /0U /0U /0U /0U 0 U 0 U. /U. /U. /U. /U. /U. U. /U traight plug ll dimensions are in mm onnector ize 0 0 max /U 9.0 / /0U /0U / / /0U /0U.. /0U /0U 0U.0 /0U 0U.0 /0U /U. 0 UU /U. / /U /U.9.0 / / /U. / U. 9/ /U. /0U ote oth versions, straight and diamond knurling available on coupling ring. or details, contact factory. O ITOT II T. T.
23 , 9 9 I hell types ightangle plug ll dimensions are in mm onnector ize max 0 0 /U /0U /0U /0U /0U 0U 0U /U /U /U /U /U U / / / / /0 U /0 U /0 U /0 U 0 U / / / / 9/ /0 U ote oth versions, straight and diamond knurling available on coupling ring. or details, contact factory. O ITOT II T. T.
24 , 9 9 I hell types ox mounting receptacle OUTI O.9 I. O IZ. I. O IZ.0 I. O OT IZ ll dimensions are in mm onnector ize / //0 U /0 U /0 U 0 U / / / / 9/ /0 U able connecting receptacle ll dimensions are in mm onnector ize / //0 U /0 U /0 U 0 U / / / / 9/ /0 U O ITOT II T. T.
25 , 9 9 I hell types ront box mounting receptacle OUTI O.9 I. O IZ. I. O IZ.0 I. O OT IZ ll dimensions are in mm onnector ize max max ack box mounting receptacle OUTI O.9 I. O IZ. I. O IZ.0 I. O OT IZ ll dimensions are in mm onnector ize / //0 U /0 U /0 U 0 U / // / / 9/ /0 U O ITOT II T. T.
26 , 9 9 I hell types ront box mounting receptacle OUTI O.9 I. O IZ. I. O IZ.0 I. O OT IZ ll dimensions are in mm onnector ize max max ack box mounting receptacle OUTI O.9 I. O IZ. I. O IZ.0 I. O OT IZ ll dimensions are in mm onnector ize / /0 U /0 U /0 U 0 U / / / / 9/ /0 U O ITOT II T. T.
27 , 9 9 I hell types traight plug ll dimensions are in mm onnector ize 0 0 max / //0 U /0 U /0 U 0 U / // / / 9/ /0 U ight angle plug ll dimensions are in mm onnector ize 0 0 max / //0 U /0 U /0 U 0 U / // / / 9/ /0 U ote oth versions, straight and diamond knurling available on coupling ring. or details, contact factory. O ITOT II T. T.
28 , 9 9 I ack accessories olid backshell with out grommet and sleeve lass ll dimensions are in mm onnector ize 0 0 / / / //0 U //0 U /0 U /0 U 0 U / // / / 9/ /0 U max for /9 max for 9 max / U / U / U //0 U //0 U /0 U /0 U 0 U / U / U / U / U / U U olid backshell with grommet and sleeve lass ll dimensions are in mm onnector ize 0 0 max max class for /9 for 9 max /.00.0 / 0. / 0. //0 U.0.0 //0 U.0 /0 U.0. /0 U.0. 0 U /.0.0 //.0. /.0.0 /.0.0 9/..0. /0 U..0. ote oth versions, straight and diamond knurling available on back accessories. or details, contact factory. O ITOT II T. T.
29 , 9 9 I ack accessories train relief backshell with grommet and sleeve lass and ight angle backshell with or without grommet lass, and ll dimensions are in mm onnector ize 0 0 class / / //0 U /0 U /0 U 0 U / // / / 9/ /0 U max for / max for max ll dimensions are in mm onnector ize 0 0 class / / / /0 U /0 U /0 U /0 U 0 U / / / / 9/ /0 U max for / max for max max / U / U / U //0 U /0 U /0 U /0 U 0 U / U / U / U / U / U U ote oth versions, straight and diamond knurling available on back accessories. or details, contact factory. O ITOT II T. T.
30 , 9 9 I ack accessories able clamp 0 Use 0sleeves ll dimensions are in mm art number hell size ax O of cable 0 0, / 0,..9.. /0 0, / , / 0,.... / // eoprene sleeve 0 ubber bushing. rotects wire bundles and unjacketed cables from possible damage by cable clamp. 0 ll dimensions are in mm art number ad ad / / / / / / / / / / / / / / / / / / 9 O ITOT II T. T.
31 , 9 9 I Other accessories rotective cap for and 9 series 0 or plugs as external threads and is used on all plugs where acoupling ring is provided. X X ll dimensions are in mm art number or connector size 00 0 / / / / 00 0 // 0 / 0 / 0 // 0 0 // 00 0 // rotective cap for and 9 series 0 or receptacles as internal threads and is used on all receptacles. asket is provided in the dust cap forming a water tight seal. X X ll dimensions are in mm art number or connector size 00 0 / // / / //... 0 / / // // / otes :... or protective caps without chain or with nylon cord, contact factory. tandard black anodised finish. or alternative finishes, contact factory. tandard straight knurling. or diamond knurling on caps, contact factory. O ITOT II T. T. 0
32 , 9 9 I Other accessories rotective cap for 9 series 90 or plugs as external grooves and is used on all plugs ll dimensions are in mm art number or connector size max rotective cap for 9 series 90 or plugs asinternalbayonetpinsandisusedonallreceptacles. ll dimensions are in mm art number or connector size max otes :. or protective caps without chain or with nylon cord, contact factory.. tandard black anodised finish. or alternative finishes, contact factory.. tandard straight knurling. or diamond knurling on caps, contact factory. O ITOT II T. T.
33 O, 9 9 I Other accessories lain lat asket for, 9 and 9 flange mounted receptacles ll dimensions are in mm O O art number 0000 or connector size 0 max & & & daptor hell size 0 / 0 / /0 /0 0 / / / / / ote or ordering information on flat gaskets and adaptors, contact factory. O ITOT II T. T.
34 , 9 9 I Other accessories ummy receptacle 0 O O X ll dimensions are in mm art number (see note) / /0 /0 /0 /0 0 0 / / / / / / max. ote: The dash number also indicates shell size. pecial accessories or special accessories, please contact factory with specifications and drawings. mphenol has inhouse capability to meet and custom build your special accessories requirements for its range of I0, 9 and 9 series connectors. O ITOT II T. T.
35 , 9 9 I Ordering /9 series connectors Toobtainthespecificconnectorrequired,writedowntheconnectornumberfromthetypicalexamplebelow.Onlyinsertsshowninthe availability chart shown on page can be specified. onnectors are delivered with protective plastic dust covers. Include premating contact designation only if premating contact is required. The second letter in the premating contact designation stands for the actual contact position. ny deviation from the specified design is indicated by at the end of the connector number. at the end of the connector number indicates telescopic bushing provided W W eries designation 9 9 ilitary reference Industrial version ( Insert) ayonet version older rimp hell style 00 WWall mounting receptacle 0 able connecting receptacle 0 ox mounting receptacle 0 ack box mounting receptacle 0 traight plug 0 90 plug 0 remating contactdesignation ee pages 9 to 9 lternatepositions WXYZ (o suffix ormal) ee insert orientations on page. ontact type in contacts ocket contacts tandard ilver plating ote : ontact factory for gold plating part number. ee pages 9 to 9 onnector class olid backshell. nvironment resisting with grommet seal and strain relief backshell. nvironmental resisting with grommet seal and strain relief backshell. 0 style includes a front gasket seal. ll the other styles are identical to lass. nvironmental resisting with grommet seal, lightweight, shorter overall length. ote : ee eneral description on page. hell size 0,0,,,,,,,,0,,,,,. hellfinish tandard admium plating with olive drab chromate finish lternate finishes. lack anodised finish. admium free zinccobalt plating with olive drab chromate finish. admium free zinccobalt plating with black finish or details contact factory. O ITOT II T. T.
MS AND 97B - SERIES ACR
9 I 060 Introduction mphenol and 9 series are two series of thread & ayonetcoupled connectors designed to meet the operating requirements of I0. vailable in a variety of styles and classes, these connectors
More informationMS/Standard how to order
/tandard how to order I--5015 and I-5015 ype (older ontacts) 102 18 W () 1 2 5 7 8 1. onnector ype designates ilitary tandard * designates service class and with proprietary special * designates service
More informationMS & 97B - Series ACRMS
& 97 eries 0 0 I ntroduction & age ontents Introduction mphenol & 97 series are two series of thread & ayonet coupled connectors designed to meet the operating requirements of I0. available in a variety
More informationHigh Power Contacts - Up to 850A
8 Series igh Power Contacts igh Power Contacts - Up to 850 esigned to meet the harshest military requirements where high power and shielding are needed. 3 aluminum shell sizes available Size 19 (450 max);
More informationHow To Order SHELL SIZE MATERIAL AND CONTACT TERMINATION CONTACT ARRANGEMENT ALTERNATE INSERT POLARIZATION
Pin contacts in a compression glass seal older pot or eyelet termination eak rate not in excess of.01 micron cu. ft./hr. 0 psi differential causes no detectable leakage in excess of.01 micron cu. ft./hr.
More informationAmphenol C 091 A/B/D. Circular Connectors. Amphenol-Tuchel Electronics GmbH
Amphenol C 091 A/B/D Circular Connectors Amphenol-Tuchel Electronics GmbH General information These connectors are designed and produced in conformity with the low-voltage directive (/3/EWG) respectively
More informationSeries Shrink Boot Adapters. Series Shrink Boot, EMI/RFI, Strain Relief. Series Shrink Boot, EMI/RFI, Shield Sock
Product Selection Guide How For a complete Table of Contents please see the last page of this book Series 310 - Shrink Boot Adapters The adapters in this section are designed to accommodate lipped-type
More informationGeneral-purpose Multi-Contact Circular Waterproof Connectors
General-purpose Multi-ontact ircular Waterproof onnectors RM-W Series Plug _ straight Ø. Ø Long backshell Overview High performance waterproof circular connectors and cable assemblies used in variety of
More informationD-DF. Right angle version: full gold plating over 2µm. Straight version: full gold plating over 2µm
- -ub connectors - crew-machined ontacts I MHIN ONTT ONNTOR HRTRITI pecifications onnectors according to MIL 208 - N925-H5 Materials and lating hells teel tinned, with dimples on plug connector Insulator
More informationConnector~Tech Providing Harsh Environment Connector
Connector~Tech www.connectortech.com.au Providing Harsh Environment Connector SOLUTIONS Tajimi TC18 series connectors are water-pro up to 30 meters in depth. Economical and highly reliable construction
More informationThe Working Environment
How How The Working Environment The broad range of backshell types available today makes it critical for interconnect engineers, and others tasked with the responsibility of specifying connector accessories
More informationAmphenol. Amphenol-Tuchel Electronics GmbH. Circular Connectors C 091 A/B/D Series
Amphenol Amphenol-Tuchel Electronics GmbH Circular Connectors C 09 A/B/D Series The Company Amphenol-Tuchel Electronics GmbH is a member of the USA based Amphenol Corporation. With our own global presence
More informationŸ 9-50-way std density Ÿ way high Density Ÿ Mixed layout constructions ( e.g. 7W2, 9W4, 17W5) Ÿ Power constructions in 20A -40A ( e.g.
Ÿ 9-50-way std density Ÿ 15-78 way high Density Ÿ Mixed layout constructions ( e.g. 7W2, 9W4, 17W5) Ÿ Power constructions in 20A -40A ( e.g., 3W3, 5W5, 8W8) Ÿ Feed-through capacitor & pi filter constructions
More informationITT Cannon CA-B/CB Series Bayonet Connectors
I annon -/ eries ayonet onnectors IIO U 5015 O I IOV YO OUI I annon - / series bayonet connectors are similar to standard I--5015 (I-5015), but use an improved coupling system - a quick-mating 3-point
More information8D Series Common Section
MIL-DTL-38999 qualified crimp contacts - 1.27µm gold plated #22D type Part number Ø M39029/58 360 M39029/56 348 Conductor section AWG Conductor section mm² External Ø over insulator Min Max Min Max Min
More informationDRAWING ISO 200 REV. "R" TYP TYP SLOT OPTIONAL .130 TYP KNURL STYLE - MFG. OPTION
.500 SHELL I.D. 0.39.135 F T TOP ENTRY H J K SLOT OPTIONAL E END ENTRY G.062.062 0.49 P.130 KNURL STYLE - MFG. OPTION R S M DIMENSIONS PART # P N CABLE ENTRY ISO - 100 0.36 0.37 02 THRU 33 ISO - 200 0.57
More informationAmphenol Amphenol-Tuchel Electronics GmbH. C 091 A/B/D Series. Circular Connectors.
mphenol mphenol-tuchel Electronics GmbH C 09 //D Series Circular Connectors www.industrial-amphenol.com Note from the CEO Ladies and Gentlemen, For over years mphenol has enjoyed success as the interconnection
More informationHARTING D-Sub Selection Guide
HARTING D-Sub Selection Guide People Power Partnership D-Sub Selection Guide D-Sub Device Connectivity HARTING Connectivity & Networks generates solutions throughout the triad of Installation Technology,
More informationImformation of C091D series
Imformation of C09D series The QTY of contacts is -pin to -pin, the connection method for the thread type, pinhole connections for welding type, press-fit and PCB type. This series of connectors to prevent
More informationIntroduction RUSSIAN CONNECTORS
RUSSIN CONNECTORS Introduction mphenol Russian Series are of threaded coupled connectors designed to meet the operating requirements of Indian Defense Standard Joint Services Specifications JSS 00, issued
More informationHDE SERIES CONNECTOR TABLE OF CONTENTS
HDE SERIES COECTOR TLE OF COTETS Product pplications Code Logic Code Logic Continued / Examples HDE Features Product Options Component Dimensions 9 Receptacle Dimensions 0 Grommets - Insert rrangements
More information1. Based on the design and application considerations select the backshell type from the Backshell Family section in pages: 1-3
How to select a suitable Backshell? 1. Based on the design and application considerations select the backshell type from the Backshell Family section in pages: 1-3 2. Go thru the Angle/profile and Coupling
More informationSIM Mono Module Push Pull Connectors
SIM Mono Module Push Pull Connectors EN RINC 809 Immeuble le Doublon avenue Dubonnet 90 COURBEVOIE Cedex FRNCE Version. Tel : (0) 9 0 0 00 Fax : (0) 9 0 0 0 www. amphenol-airlb. fr PRESENTTION PRT NUMBERING
More informationAmphenol AIB/GT Series MIL-DTL-5015
OI & IIY mphenol I/ eries I--5015 IOV OUI OV I--5015 he I/ eries replaces the threaded coupling used in I--5015 with a positive, quick-mating, three-point reverse bayonet lock for improved performance.
More informationSize A DIN EN
Size A DIN EN 70-0 Actuators 0 series DIN EN 70-0 +, + ow and high housing Degree of protection IP6 Wired versions Moulded versions Degree of protection IP67 Contacts Thread Cable outlet Ordering-No. Female
More informationDIM. A (+ 0,05 0,51) .135 ±.015 (3,43 ± 0,38) COMMON LUG INTEGRAL ASSEMBLY NUT, DO NOT REMOVE 1/4-32 UNEF-2A THREAD
Multi-Deck SERIES 0 SERIES 0 0." Diameter, / Amp, Standard, Military SR FEATURES Proven Quality in Thousands of Applications Gold-plated Contact System 0,,, 0 and 0 Angle Options MIL Qualified Versions
More informationRotary Switches AC09, 16 and 32
09, 16 and 32 igital code output type escription FUJI series rotary switches offer a wide choice of output codes. They feature sliding u-flashed contacts for high contact reliability. Inhibitor and parity
More informationA B C D E F G H J K L M N P Q
onnectors Vertical ount Vertical ount rinted ircuit oard icro - ilter onnectors. These vertical mount connectors are ideal for flexible circuit or motherboard applications. ey eatures include gold plated
More informationTX14/15 SERIES CONNECTORS
The leaf-type design (non-pin) contact of this board-to-board connector is superior in reliability and stability due to its resistance to twisting. The receptacle (TX1) and plug (TX15) combination can
More informationC Electrical Connector Subsea / Underwater / Marine
www.r-marine.com Tel: + 0 ax: + 0 0 mail: sales@r-marine.com lectrical onnector Subsea / Underwater / Marine The most common applications: ROV ive ell onnectors Underwater ameras and Lights Underwater
More information180 Angular Gripper. Series MHY2/MHW2. Cam actuation style is now standardised! 5-241
18 Angular Gripper Cam tyle Rack & Pinion tyle eries MHY2/MHW2 Cam actuation style is now standardised! -21 18 Angular Gripper Cam tyle Rack & Pinion tyle eries MHY2/MHW2 eries MHY/Cam tyle Light and compact
More informationSingle Module EN4165 ARINC BACC 65 EN4165. The New Standard Connector for Aircraft equipment and cabin systems. Advantages
Single Module EN4165 ARINC 809 - BACC 65 EN4165 The New Standard Connector for Aircraft equipment and cabin systems. Advantages Light weight composite, modularity, color coded, push pull coupling are the
More informationAmphenol. BACKSHELLS For LJT, RNJ, RNJ LP, JT, TV-CTV, SC39 AND SJT connectors. For MIL-DTL series I,II,III and VG96912 connectors
Amphenol For LJT, RNJ, RNJ LP, JT, TV-CTV, SC39 AND SJT connectors For MIL-DTL-38999 series I,II,III and VG96912 connectors www.38999-solutions.com - www.amphenol-socapex.com
More informationPRELIMINARY PRODUCT SPECIFICATION. Part Number Product Description Doc Number
Page 1 PRELIMINARY Page 2 1.0 SCOPE. This specification covers performance, tests and quality requirements for the USB Type C Receptacle range. USB4050, USB4055, USB4060, USB4065. 2.0 PRODUCT NAME AND
More informationTable of Contents Pin-Configuration Selection Guide for HDE, HDS, & EFP
Table of Contents -Configuration Selection Guide for HDE, HDS, & EFP Service Voltage Rating... Electrical Service Ratings... Ampacity Ratings by Contact... Electrical Service Ratings Explained... Operating
More informationSERIES 10 ELEKTRISCHE STECKVERBINDER FÜR MEERES- UND MARINETECHNIK HIGH PERFORMANCE UNDERWATER ELECTRICAL CONNECTORS
SERIES 0 ELEKTRISHE STEKVERINDER FÜR MEERES- UND MRINETEHNIK HIGH PERFORMNE UNDERWTER ELETRIL ONNETORS Leinestraße D-9 Neumünster Tel. +9 - - 98-0 Fax +9 - - 98 - http://www.gisma-connectors.de E-Mail:
More informationRJ Connector. IP 67 Receptacle I Unmated & Mated Overmolded with Cable I Mated Field Installable I Mated. RJ Connector I Range Overview
RJ Connector RJ Connector I Range Overview RJ Connector IP 67 Receptacle I Unmated & Mated I Mated I Mated 8-1 TW Technology Co., td. RJ Connector I Range Overview Range Overview Receptacle and Mating
More informationProduct Series Specification Document
Product Series 3.96mm pitch board-to-board connectors - Socket SCOPE This document covers 3.96mm socket connectors. The connector will perform to the specifications outlined. All tests have been performed
More informationFLT5A FLT5A. abc. abc. Thermometer User Guide. Thermometer User Guide. Internet:
abc instruments international FLT5A Thermometer Land Instruments International Dronfield, S18 1DJ England Telephone: (1246) 417691 Facsimile: (1246) 41585 Email: infrared.sales@landinst.com Internet: www.landinst.com
More informationWIREWAY & TROUGH. Lay-In Type 12 Wireway... WWY 1-2. Feed-Through Type 12 Wireway... WWY 3-4. Hinge/Screw Cover Wiring Trough...
ourtesy of Steven Engineering, Inc.! 230 Ryan Way, South San Francisco, 94080-6370! ain Office: (650) 588-9200! Outside Local rea: (800) 258-9200! www.stevenengineering.com W IREWY & TROU WIREWY & TROU...
More informationQuad 10GBASE-T to XAUI Converter
T-ENET-QU-10G PS-248-3 FETURES + + (4) 10G Ethernet hannels + + Protocol conversion between 10GSE-T and XUI + + Perfect for routing multiple 10 Gigabit Ethernet connections into systems and to and from
More informationFASTON Terminals (Insulated and Uninsulated)
FSTON Terminals (Insulated and Uninsulated) FSTON ousings FSTON ousings Product Facts Straight, right-angle, multiple position and special application housings available Various materials and temperature
More informationIntelligence is Simplicity
Intelligence is implicity lmo armonica, ello, assoon ervo rives and Motor ackages lmo offers servo drive and motor solutions for the industrial market. Our servo drive and motor packages offer high-end
More informationSingle Socket and Horizontal Metering
idwest lectric Products Single Socket and Horizontal etering G pproved Single Socket etering G pproved pplication Information idwest s Single Socket etering products are designed for residential use. They
More informationSTATIC GAS MONITOR Type SGM/DEW Revision A of 20 aprile 2016
APPLICATIONS Moisture monitoring of air or gas (SF6) Suitable for indoor or outdoor Industrial, medical or aerospace fields HIGHLIGHTS High voltage circuit breakers commonly used for distribution and transmission
More informationCommercial Generator Parts Catalog. PROTEC Series
Commercial Generator Parts Catalog PROTEC Series YD ÁÁ ÁÁ To avoid errors or delay in filling your parts order, always give the MODEL, SPEC NO. and SERIAL NO. from the Onan nameplate. For handy reference,
More informationPERFORMANCE SPECIFICATION SHEET
INCH-POUND MIL-PRF-64266/13A w/ Amendment 1 1 December 2014 SUPERSEDING MIL-PRF-64266/13A 15 October 2013 PERFORMANCE SPECIFICATION SHEET CONNECTORS, FIBER OPTIC, CIRCULAR, PLUG AND RECEPTACLE STYLE, MULTIPLE
More informationMINIATURE MICROSWITCHES - PREMIUM
0/06 MINIATURE MICROSWITCHES - PREMIUM V - 86 High precision flexible leaf snap-action mechanism Operation without balance-point, even at extremely slow actuating speed Broad range of operating forces
More information8ST Series VG96912 & JN1003. Connection Technologies
Connection Technologies Contents Overview Presentation... 06 Applications... 06 A universal product platform... 07 Contact layouts... 08 Contact layouts (matrix)... 12 Cross reference list... 14 Dummy
More informationPRODUCT SPECIFICATION
CONNECTOR CONNECTOR 1 of 6 CONNECTOR 1.0 SCOPE This Product Specification covers the dip type for 13pins slimline SATA receptacle connector. 2.0 PRODUCT DESCRIPTION 2.1 PRODUCT NAME AND SERIES NUMER(S)
More informationPERFORMANCE SPECIFICATION SHEET
INCH-POUND MIL-PRF-64266/21 w/ AMENDMENT 1 1 December 2014 MIL-PRF-64266/21 6 November 2013 PERFORMANCE SPECIFICATION SHEET CONNECTORS, FIBER OPTIC, CIRCULAR, PLUG AND RECEPTACLE STYLE, MULTIPLE REMOVABLE
More information3M Pak 10 Plug, PK10 series PK10-XXXPX-X-DA. 3M Pak 10 Socket, PK10 series PK10-XXXSX-X-DA
Page of 8 M Pak 0 Plug, PK0 series PK0-XXXPX-X-DA M Pak 0 Socket, PK0 series PK0-XXXSX-X-DA Product Specification Revised 08-0- Page of 8 Table of Contents Title Page.............................................................................
More informationfischer connectors General Catalogue Edition 5.2
fischer connectors Edition. General Catalogue SUMMARY Ordering Information Mechanical Specifications Electrical Specifications Thermocouple Connectors Part number system and definitions, Body styles Coaxial,
More informationSpecifications. Stroke length. Small direct mounting cylinder MDC2 Series. Port size: M3 (For 4, 6, 8 mm bore) M5 (For 10 mm bore) Descriptions
mall direct mounting cylinder 2 eries ort size: (or,, mm bore) (or mm bore) I symbol ingle acting spring return type ingle acting spring extend type ouble acting VI. pecifications escriptions ore size
More informationMilitary Qualified 10AT Series Snap Action Precision Position Switches
Military Qualified 10AT Series Snap Action Precision Position Switches FEATURES Stainless steel, hermetic seal construction Rated up to 4 amps, 30VDC MIL-PRF-8805 qualified Various mounting configurations
More informationDistinctive Characteristics
Distinctive haracteristics Miniature Toggles Series M ntirotation design, standard on noncylindrical levers, mates toggle and bushing; bottom of toggle has two fl atted sides which fit into a complementary
More informationAbsolute encoders multiturn
elektronischer electronic multiturn, Multiturn, magnetic magnetisch Sendix M66 / M68 (shaft / hollow shaft) The Sendix M6 with Energy Harvesting Technology is an electronic multiturn encoder in miniature
More information2.3. Rockers. Contents
. SVRSealed Vehicle SVRSealed Vehicle Rocker Contents Description SVRSealed Vehicle Above Panel Rocker Switch............... Below Panel Rocker Switch............... Technical Data and Specifications..........
More informationInstallation and Operation Manual. AllSync Plus Wired Clocks
and Operation Manual AllSync Plus Wired Clocks Part # H004881 Rev. 4 September 2018 Safety Precautions AllSync Plus Clock & Operation Manual Troubleshooting General Operation Introduction Safety Precautions
More informationCONNECTORS, ELECTRICAL, RECTANGULAR, MICROMINIATURE, NON-REMOVABLE GAUGE 26 PCB PIN CONTACTS BASED ON TYPE 8MCG
Page 1 of 27 CONNECTORS, ELECTRICAL, RECTANGULAR, MICROMINIATURE, NON-REMOVABLE GAUGE 26 PCB PIN CONTACTS BASED ON TYPE 8MCG Issue 6 June 2018 Document Custodian: European Space Agency see https://escies.org
More informationBlower Motor 3P Connector
1. Scope Blower Motor P Connector 1.1 Content This specification covers the requirements for product performance, test methods and quality assurance provisions of Blower Motor P connector. Applicable product
More informationProduct Data Sheet PD-0037-B
Product Data Sheet PD-0037-B 3M Shielded Compact Ribbon (SCR) Connector 3M Shielded Compact Ribbon (SCR) Boardmount Right Angle 36110-2220 XX 3 Electronic Solutions Division Page: 1 of 12 Table of Contents
More informationBore size: 4, 6, 8, 10. Double acting. Double acting Compressed air Withstanding pressure Ambient temperature Port size
*2 2 2 G 2 V2 /V2 V 2 * * U U G U2 2 U 2 G pecifications troke length ore size ylinder switch specifications escriptions pplications utput method ower voltage oad voltage oad current urrent consumption
More informationPCB Hermetic Box Mounting Receptacle Commercial
PCB Hermetic Box ounting Receptacle 2 PCE R1 2 PCE R2 2 PCE.913.093 ccess PRT # ee chart below 4 PCE.005 T 4 PCE BND d Base nsert Type/lt. Tail Number rrg. Keying Finish ength 501-35 P 1 B PCB T TCKOUT
More information3M Pak 50 Boardmount Socket, P50 series P50-XXXS-XXX-EA. 3M Pak 50 Boardmount Plug, P50 series P50-XXXP-XXX-EA
Page of 8 3M Pak 50 Boardmount Socket, P50 series P50-XXXS-XXX-EA 3M Pak 50 Boardmount Plug, P50 series P50-XXXP-XXX-EA Product Specification 78-50-0-7 Revised 08-09- Page of 8 Table of Contents Title
More informationThermal-Magnetic Circuit Breaker 2210-S2..
Thermal-Magnetic Circuit Breaker -S.. Description One, two and three pole thermal-magnetic circuit breakers with trip-free mechanism and toggle actuation (S-type TM CBE to EN 60934/IEC 934). Designed for
More informationNickel-Plated Brass Push-In Fittings - NPTF/INCH
/INCH Tube Connections: External /8, 5/32, /4, 5/6, 3/8, /2 Thread Connections 0-32 UNF, /8, /4, 3/8, /2 Reusable thread seal, PTFE seal ring (Teflon ) - Pro-Fit Standard - Camozzi s all metal fittings
More informationNM1. Moulded Case Circuit Breaker NM1 P-084. Moulded Case Circuit Breakers. 2. Type designation. 1. General. 3. Classification N M 1- /
P0. Type designation N M / Type of Npole for P breaker* pplication: lank: for power distribution; : for motor protection elease type and accessory code (please refer to table on page 9) Number of poles
More informationINSTITUTE OF TESTING AND CERTIFICATION (INDIA) PVT.LTD.
(INDIA) VT.LTD. 60598-1 Requirement Result/Remarks Verdict 2.2 2.3 2.4 2.5 3.2.1 3.2.2 3.2.3 3.2.4 3.2.5 3.2.6 3.2.7 3.2.8 3.2.9 2 Classification of Luminaries Classification according to type of protection
More informationPRODUCT SPECIFICATION 1 SCOPE APPLICABLE STANDARDS CATALOG NO. STRUCTURE..3 4 CONNECTOR SHAPE, DIMENSIONS AND MARTERIALS..
1 of 1 A Table of Contents: 1 SCOPE.. 3 2 APPLICABLE STANDARDS..... 3 3 CATALOG NO. STRUCTURE..3 4 CONNECTOR SHAPE, DIMENSIONS AND MARTERIALS..3 5 ACCOMMOD CONDUCTORS (CIC).....3 6 PACKAGING CONDITION........3
More informationProduct Data Sheet PD-0053-A
Product Data Sheet PD-0053-A 3M Mini D Ribbon (MDR) Connector MDR Surface Mount 102XX-1210 XE 102XX-1S10 XE Page: 1 of 11 Table of Contents 1.0 SCOPE...2 2.0 PRODUCT TESTED...2 3.0 GENERAL CONDITIONS...2
More informationDRAWING ISO 155 REV. "K" PART NUMBER BREAKOUT
QUIK REFERENE TABLE SHELL SIZE SEE TABLE IV H E REF G REF H ENTRY DES. A ENTRY DES. F,H,L 08 09 0.390 0.890 1.280 02, 31 02, 31 10 11 0.420 0.920 1.360 03, 32 03, 32 12 13 0.440 0.940 1.420 04, 33 04,
More informationMINIATURE MICROSWITCHES - PREMIUM
0/08 MINIATURE MICROSWITCHES - PREMIUM V - 86 High precision flexible leaf snap-action mechanism Operation without balance-point, even at extremely slow actuating speed Broad range of operating forces
More informationmicroswitches Low force
0/06 Subminiature MICOSWITCHES - PEMIUM V - 870 High precision flexible leaf snap-action mechanism Operation without balance-point, even at extremely slow actuating speed atings from ma Vc up to (6) A
More informationED 701 General Industry Pressure Transmitter
ED 701 General Industry Pressure Transmitter Standard industrial process connections Complete range of electrical connections 4... 20 ma and Voltage outputs Accuracy: 0.1%, 0.2% and 0.4% FS Quick response
More informationPRODUCT SPECIFICATION
1 of 10 H 1.0 GENERAL THIS SPECIFICATION COVERS.039 INCHES VERTICAL DDR II SOCKETS WITH BLANKED / FORMED CONTACT DESIGNED FOR PRINTED WIRING BOARD TO DUAL IN-LINE MEMORY MODULE INTERCONNECTION. IN ALL
More informationRIGID PVC CONDUIT FITTINGS AND ACCESSORIES
AND ACCESSORIES APPLICATIONS Utilities Cable, data and communication lines Institutional, commercial, industrial buildings Residential applications, service entrances Street and highway underground feeds
More informationTURQUOISE SWITCHES V TYPE (ABV)
HIGH ENVIRONMENTAL RESISTANCE TURQUOISE SWITCHES V TYPE (ABV) FEATURES Miniature size (33 15.9.3 mm) (99.626.406 inch) Sealed construction for use in adverse environment Sealed construction by epoxy resin
More informationEMI Filtered Connectors
MI ed onnectors from performance to board space, to cost, we offer many reasons and options for managing MI @ the signal & power I/O Series errite ed onnectors offer a low cost, space saving solution for
More informationSeries MHY2/MHW Angular Gripper. Cam actuation style is now standardized! MHZ2 MHZJ2 MHQ MHL2 MHR MHK MHS MHC2 MHT2 MHY2 MHW2 MRHQ 2.
18 Angular Gripper Cam Style Rack & Pinion Style Series / Cam actuation style is now standardized! 2.8-1 18 Angular Gripper 18 Angular Gripper Series / Cam Style Rack & Pinion Style Series / Series MHY/Cam
More information(A -A )/(M IL -T )
Kulka M ilitary C las s (A -A -5 9 12 5 )/(M IL -T -5 5 16 4 ) M ilitary C las s : C lo s e d B ac k T h e s e m ilita ry b lo c k s fe a tu re m o ld e d -in te rm in a ls in a n im p ro v e d K u lk
More informationBETA Protecting. Low-Voltage Fuse Systems. LV HRC fuse links. 3/36 Siemens ET B1 2008
LV HRC fuse links Overview LV HRC fuses are used for installation systems in non-residential, commercial and industrial buildings as well as in switchboards of power supply companies. They therefore protect
More informationThermal-Magnetic Circuit Breaker 2210-S2..
Thermal-Magnetic Circuit Breaker -S.. Description One, two and three pole thermal-magnetic circuit breakers with trip free mechanism and toggle actuation (S-type TM CBE to EN 60934/IEC 934). Designed for
More informationValve Products ADEX Series Valves
atalog 000-2US X alves X is a miniature low power consumption solenoid valves, ideal for powering small to mid-sized pneumatic actuators used in automation and process applications. X's versatility is
More informationPERFORMANCE SPECIFICATION SHEET
INCH-POUND MIL-PRF-22885/77F 2 August 2018 SUPERSEDING MIL-PRF-22885/77E 25 April 2013 PERFORMANCE SPECIFICATION SHEET SWITCHES, PUSH BUTTON, ILLUMINATED, 4-LAMP, 0.75 SQUARE, 7.5 AMPERES, AND LOW LEVEL
More informationDistinctive Characteristics
Distinctive Characteristics Three methods of panel mounting: flat frame for flush with face or subpanel, snap-in, and PCB. Miniature Rockers Series M High insulating barriers increase isolation of circuits
More informationAmphenol. Amphenol-Tuchel Electronics GmbH. Series C 146 Heavy Duty Connectors Core Programme
Amphenol Amphenol-Tuchel Electronics GmbH Series C 146 Heavy Duty Connectors Core Programme The Company General information These connectors are designed and produced in conformity with the voltage directive
More informationSurface Mount Multilayer Ceramic Capacitors for Pulse Current Applications
Surface Mount Multilayer Ceramic Capacitors for Pulse Current Applications ELECTRICAL SPECIFICATIONS Note Electrical characteristics at +25 C unless otherwise specified FEATURES Low electrostrictive ceramic
More informationM2 SERIES THERMOSTATS 0 F to 240 F, Narrow Differential, Hermetically Sealed ½
M2 SERIES THERMOSTATS 0 F to 240 F, Narrow Differential, Hermetically Sealed ½ Introduction The Klixon M2 thermostat is constructed with a snap acting bimetal disc that serves as the actuating element.
More informationCOMPACT CYLINDERS SERIES CMPC Ø
T YIE EIE 0 ompact cylinder series available in numerous versions to meet a full range of requirements: With or without magnet ingle-acting extended rod, retracted or through-rod ual-acting non-rotating
More information7000 SERIES THUMBWHEEL SWITCHES
7000 SERIES THUMBWHEEL SWITCHES The combines heavy-duty construction and a compact package size. Designed to meet demanding military performance specifications, the switch features a unique one-piece housing
More informationC V S T B T 1 0 ( )
SLIDE SINGLE SWITCHES TURN WIREWOUND ( mm TRIMMERS PITCH) -6/- -T 6 FEATURES Lowest profile design of. mm Fine pitch of mm Easy motion with knob height of 0. mm 6 Part Part name name Material Material
More informationFEATURES APPLICATIONS DESCRIPTION QUICK REFERENCE DATA. PILKOR components
FEATURES Excellent anti-surge characteristics Stable characteristics to moisture resistance even in high resistance range. Good replacement for ceramic plate resistors. APPLICATIONS Telecommunication Industrial
More informationWhat You Need to Get Started INSTALLATION GUIDE
INSTALLATION GUIDE SBS-96F SHIELDED BACKSHELL This guide describes how to assemble and install the SBS-96F shielded backshell with low-voltage SCXI modules, VXI-DAQ modules, or low-voltage TBX terminal
More informationPressure Transmitter ED 701
Pressure Transmitter ED 701 Hygienic and industrial process connections Zero setting function Accuracy < 0.1% FS Quick response time < 25 ms High long-term stability Excellent repeatability Active compensation
More informationThermal-Magnetic Circuit Breaker 2210-S2..
Thermal-Magnetic Circuit Breaker -S.. Description One, two and three pole thermal-magnetic circuit breakers with trip free mechanism and toggle actuation (S-type TM CBE to EN 6094/IEC 94). Designed for
More informationFlexitest Switch Assemblies Type FT-19R and FT-19RX Supersedes DB March 2008
Flexitest Switch Assemblies Type FT-19R and FT-19RX Supersedes DB41-078 March 2008 FT-19R and FT-19RX FT-19R 3RU with Individual Clear Covers APPLICATION FEATURES The type FT-19R (standard length) and
More informationPRODUCT SPECIFICATION
Page 1 Page 2 1.0 SCOPE. This specification covers performance, tests and quality requirements for the SIM Card Connector SIM 2055 (Receiver Type, 6-Pin, SMT, 1.8 & 2.2mm Profiles). 2.0 PRODUCT NAME AND
More informationTerminal Block Accessories
Kliptite (Quick onnect) - Single Row Specifications: Terminal lock ccessories Kliptite (Quick onnect) accept standard female wire terminals. These Klipties are ideal for applications that require a positive,
More informationThermal-Magnetic Circuit Breaker 2210-S2...
Thermal-Magnetic Circuit Breaker 0-S... Description One, two and three pole thermal-magnetic circuit breakers with trip free mechanism and toggle actuation (S-type TM CBE to EN 60934/IEC 934). Designed
More information