3M Pak 10 Plug, PK10 series PK10-XXXPX-X-DA. 3M Pak 10 Socket, PK10 series PK10-XXXSX-X-DA
|
|
- Lora Wilkerson
- 5 years ago
- Views:
Transcription
1 Page of 8 M Pak 0 Plug, PK0 series PK0-XXXPX-X-DA M Pak 0 Socket, PK0 series PK0-XXXSX-X-DA Product Specification Revised 08-0-
2 Page of 8 Table of Contents Title Page Contents Scope M Customer Documents Performance Testing Performance and Characteristics Overview Electrical Mechanical Physical Environmental Qualification Test Groups and Sequences Important Notice Warranty Information Steven A. Neu: Approved Jim W. Wessman: Approved 08-0-
3 Page of 8.0 Scope This document summarizes test methods, test conditions, and product performance requirements for M Pak 0 Socket PK0 Series mated to M Pak 0 Plug PK0 Series. In the event of performance data conflicts between this specification and any documents listed below, this specification supersedes those documents. Materials and finishes listed in the documents below apply and are included in this specification for reference only..0 M Customer Documents Technical data sheet for Pak 0 Plug PK0 Series Techical data sheet for Pak 0 Socket PK0 Series.0 Performance Testing Unless otherwise specified, all tests shall be performed on PK0-XXXSX-X-DA sockets mated to PK0-XXXPX-X-DA plugs at ambient environmental conditions per EIA-6. Unless otherwise specified, all values and limits are typical of those obtained by qualification testing of the subject product. All specifications are subject to revision and change without notice from M..0 Performance and Characteristics Overview. Ratings Dielectric Withstanding Voltage: 5 VACrms at sea level for minute Current (AC or DC): 0.5 A Temperature: -55 C to +85 C Insulation resistance: > x0 9 Ω at 500 VDC. Materials Socket: Material: Glass filled LCP Flammability: UL 9V-0 Color: White Contact Material: Copper Alloy Plug: Material: Glass Filled LCP Flammability: UL 9V-0 Color: White Contact Material: Copper Alloy. Finishes Plating: Underplating: 0μ"[.0 μm]nickel Wiping Area: μ" [ 0.05 μm ] min. Gold Solder Tails: Gold Flash Retaining Clips: Gold Flash over 0μ"[.0 μm] Nickel
4 Page of 8. Regulatory Compliance See Regulatory Information Appendix (RIA) in the RoHS compliance section of for compliance information. See customer drawings for regulatory specifics on each connector. 5.0 Electrical Description or Parameter Dielectric Withstanding Voltage (DWV) Current Rating: All Contacts in Series Low Level Contact Resistance (LLCR) Specification No dielectric breakdown or arcing. Temperature Rise: < 0⁰C Results: 0.5 A =5⁰C Temp. Rise Max R: <50 mω Apply 5 VAC RMS Voltage for minute betweeen adjacent contacts. Ambient: ⁰C Wire Measurement Current: ma DC Test Method Results Insulation Resistance (IR) 000 MΩ min. Apply 500V DC for minute between two adjacent contacts. 6.0 Mechanical Description or Parameter Specification Test Method Test Standard or Method Physical Shock No electrical discontinuity > µ sec Acceleration: 50G Shock Mode: half sine wave Duration: ms x in each X,Y,Z opposite direction 00mA DC applied to all contacts in series
5 Page 5 of 8 Vibration Peel-Off Test No electrical discontinuity > µ sec No damage to connector. No cracking or peeling at the leads. Frequency: 0-55 Hz Amplitude:.5 mm Sweep time: min hours in each X,Y,Z opposite direction 00 ma applied to all contacts in series Reflow Soldering Conditions: Temperature: < 50⁰C Duration: min. Thickness of cream solder: 0.5 mm Insertion Force Withdrawal Force (Contact Retention) Durability (00 times) Durability (500 times) Insertion Force: < 7.8 kg (00 pins) Withdrawal Force: <.0 kg (00 pins) LLCR: 50 mω Max LLCR: 50 mω Max Post Reflow Requirements: Force to peel-off leads at 0 mm/min must be > 50g/pin Measure with mating connectors Measure with mating connectors 00 cycles at cycles per hour 500 cycles at 000 cycles per hour 7.0 Physical Description or Parameter Specification Test Method Result Visual Conforms to the design drawings Visual Inspection 8.0 Environmental Description or Parameter Specification Requirement or Conditions Test Standard or Method Temperature Life (Thermal Aging) LLCR: 50 mω Max No Damage or Deformation Temperature: +85⁰C Duration: 500 hours No serious corrosion Temperature: +5⁰C Salt Spray LLCR: 50mΩ Max Duration: 96 hours Concentration: 5%. -55⁰C for 0 min Thermal Shock. +5⁰C for 5 min Repeat -, 5 ( 5 cycles, -55⁰C to +85⁰C ). +85⁰C for 0 min. +5⁰C for 5 min cycles Humidity: 90-95% RH Humidity DWV: No breakdown or arcing Temperature: 0⁰C IR: 000 MΩ Min Duration: 96 hrs
6 Page 6 of 8 No serious corrosion. Temperature: 0⁰C H S Exposure LLLCR: 50 mω Max Concentration: ppm RH: 80% Duration: 96 hours No serious corrosion. Temperature: 0⁰C SO Exposure LLLCR: 50 mω Max Concentration: 0 ppm RH: 80% Duration: 96 hours No damage. Conditions: LLLCR: 50 mω Max hrs. () 5⁰C to 65⁰C.5 () 65⁰C.0 () 65⁰C to 5⁰C.5 () 5⁰C to 65⁰C.5 (5) 65⁰C.0 Moisture (6) 65⁰C to 5⁰C.5 (7a) 5⁰C 8.0 (7b) -0⁰C.0 Humidity 90-98% Humidity 80-98% 0 cycles of steps 7 Reflow Conditions: Resistance to Soldering Heat 50⁰C 00⁰C Peak min.
7 Page 7 of Qualification Test Groups and Sequences 9. Sequenced Tests Test or Examination A B Test Group C D E F G Visual Insulation Resistance Dielectric Withstanding Volatge Low Level Contact Resistance Total Insertion Force Total Withdrawal Force Thermal Shock Vibration Shock Humidity Durability (00) Salt Spray S0 Exposure HS Exposure Temperature Life Moisture , 5 9. Independent Tests Durability (500) Dielectric Withstanding Voltage Current Rating Insulation Resistance 5 Mating Force / Contact 6 Unmating Force / Contact 7 Resistance to Soldering Heat 8 Peel-off
8 Page 8 of 8 M is a trademark of M Company. Important Notice All statements, technical information, and recommendations related to M s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in M s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of M. Warranty; Limited Remedy; Limited Liability This product will be free from defects in material and manufacture for a period of one () year from the time of purchase. M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at M s option, to replace or repair the M product or refund the purchase price of the M product. Except where prohibited by law, M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this M product, regardless of the legal theory asserted. M 0. All rights reserved.
3M Pak 50 Boardmount Socket, P50 series P50-XXXS-XXX-EA. 3M Pak 50 Boardmount Plug, P50 series P50-XXXP-XXX-EA
Page of 8 3M Pak 50 Boardmount Socket, P50 series P50-XXXS-XXX-EA 3M Pak 50 Boardmount Plug, P50 series P50-XXXP-XXX-EA Product Specification 78-50-0-7 Revised 08-09- Page of 8 Table of Contents Title
More information3M HDC Socket.100 Right Angle, PCB, 3 or 4-Row, Solder Tail or Press-Fit HDC Series
M HDC Socket.100 Right Angle, PCB, or 4-Row, Solder Tail or Press-Fit HDC Series High density -row version, up to 240 contacts single bay Mates with -row single plugs and headers High density 4-row version,
More informationProduct Data Sheet PD-0036-B. 3M PC Boardmount Plug and Receptacle, 2 mm 95X Series
Product Data Sheet PD-0036-B 3M PC Boardmount Plug and Receptacle, 2 mm 95X Series Page: 1 of 7 1.0 SCOPE...2 2.0 PRODUCT TESTED...2 3.0 GENERAL CONDITIONS...2 3.1 Test Specimens...2 3.2 Standard Test
More information3M CP2 Press-Fit Header
M CP2 Press-it Header 25 mm basic system unit 8, 44 and 50 mm module 2 mm grid spacing allows for high signal density at low cost Eye of the Needle compliant pin press-fit design reduces manufacturing
More informationProduct Series Specification Document
Product Series 3.96mm pitch board-to-board connectors - Socket SCOPE This document covers 3.96mm socket connectors. The connector will perform to the specifications outlined. All tests have been performed
More information3M CF Card Header CompactFlash Type I, Low Profile, Long Guides, SMT, Inverse
M CF Card Header CompactFlash Type I, Low Profile, Long Guides, SMT, Inverse 7E50 Series Headers mate with CompactFlash Type I cards 4.0 mm Low Profile height Inverse card polarization Extended guide rails
More informationProduct Data Sheet PD-0053-A
Product Data Sheet PD-0053-A 3M Mini D Ribbon (MDR) Connector MDR Surface Mount 102XX-1210 XE 102XX-1S10 XE Page: 1 of 11 Table of Contents 1.0 SCOPE...2 2.0 PRODUCT TESTED...2 3.0 GENERAL CONDITIONS...2
More information3M MetPak CP2 Press-Fit Header 2 mm Type C, 55 Signal Contacts, Left Guidance CP2 Series
M MetPak CP2 Press-Fit Header 25 mm basic system unit CompactPCI combines the benefits of PCI desktop architecture with the ruggedness of the U and 6U IEEE Eurocard form factor popularized by the VME bus
More informationPRODUCT SPECIFICATION
Page 1 Page 2 1.0 SCOPE. This specification covers performance, tests and quality requirements for the SIM Card Connector SIM 2055 (Receiver Type, 6-Pin, SMT, 1.8 & 2.2mm Profiles). 2.0 PRODUCT NAME AND
More informationProduct Data Sheet PD-0037-B
Product Data Sheet PD-0037-B 3M Shielded Compact Ribbon (SCR) Connector 3M Shielded Compact Ribbon (SCR) Boardmount Right Angle 36110-2220 XX 3 Electronic Solutions Division Page: 1 of 12 Table of Contents
More information3M Serial Attached SCSI (SAS) Connector Boardmount Through-Hole, Vertical Receptacle
M Serial Attached SCSI (SAS) Connector Boardmount Through-Hole, Vertical Receptacle SBR Series 6 Gbps input/output connector for backplane applications Two contact mating levels for early-mate and latebreak
More informationWIESON TECHNOLOGIES CO., LTD.
TABLE OF CONTENT 1. Scope.... 2 2. Reference Documents. 2 3. Material and Components.... 2 4. Design and Construction.... 2 5. Rating.. 2 6. Performance and Test Descriptions. 2 7. Test Requirements and
More informationPRELIMINARY PRODUCT SPECIFICATION. Part Number Product Description Doc Number
Page 1 PRELIMINARY Page 2 1.0 SCOPE. This specification covers performance, tests and quality requirements for the USB Type C Receptacle range. USB4050, USB4055, USB4060, USB4065. 2.0 PRODUCT NAME AND
More informationPRODUCT SPECIFICATION
CONNECTOR CONNECTOR 1 of 6 CONNECTOR 1.0 SCOPE This Product Specification covers the dip type for 13pins slimline SATA receptacle connector. 2.0 PRODUCT DESCRIPTION 2.1 PRODUCT NAME AND SERIES NUMER(S)
More informationSPECIFICATION AND PERFORMANCE CHARACTERISTICS OF SCA-2 CONNECTOR SERIES
SPECIFICATION AND PERFORMANCE CHARACTERISTICS OF SCA-2 CIRCUIT ASSEMBLY CORP. 18 THOMAS STREET, IRVINE, CA 92618-2777 Page No. 1 CONTENTS CLAUSE PAGE 1.0 SCOPE. 4 1.2 Description. 4 2.0 APPLICABLE DOCUMENTS
More informationMOLEX TAIWAN LTD ( GC ) TITLE : SINGLE PORT UP-RIGHT TYPE USB CONNECTOR
SINGLE PORT UP-RIGHT TYPE USB CONNECTOR 971205 1 of 8 1.0 SCOPE This specification covers the USB series product. 2.0 APPLICABLE DOCUMENTS The following documents form a part of this specification to the
More informationProduct Specification
Product Specification 2013-10-21 FPC Connector 0.5mm Pitch SMT Type Bottom Contact H:2.0 Update List: Item Update Description Rev. Issued Date Revisor 1 New Edit A 2013/10/21 DLITY Prepared By DLITY Rechecked
More informationPRODUCT SPECIFICATION FOR Micro SIM +Nano SIM/Micro SD (T/F)Card Connector SERIES
Page 1 of 5 1.0 SCOPE This Specification covers Micro SIM +Nano SIM/Micro SD Card Connector SERIES 2.0 APPLICABLE DOCUMENTS AND SPECIFICATIONS See sales drawings and other sections of this specification
More informationBlower Motor 3P Connector
1. Scope Blower Motor P Connector 1.1 Content This specification covers the requirements for product performance, test methods and quality assurance provisions of Blower Motor P connector. Applicable product
More informationJun-2012 Rev A
Design Objective 108-57912 01-Jun-2012 Rev A MINI USB CONNECTOR, RECEPTACLE, VERTICAL, DIP, B TYPE 1. SCOPE 1.1. Contents This specification covers the performance, tests and quality requirements for the
More informationDDR4 SODIMM Socket 0.5mm Pitch 260Pos
1. Introduction 1.1 Testing was performed on DDR4 SODIMM SOCKET 260P to determine if it meets the requirement of Product Specification, 108-115122 Rev.A. 1.2 Scope This report covers the electrical, mechanical
More informationThis specification covers the requirements for product performance, test methods and quality assurance provisions of FG Terminal.
DESIGN OBJECTIVES The product described in this document has not been fully tested to ensure conformance to the requirements outlined below. Therefore AMP Ltd makes no representation or warranty, express
More informationPRODUCT SPECIFICATION 1 SCOPE APPLICABLE STANDARDS CATALOG NO. STRUCTURE..3 4 CONNECTOR SHAPE, DIMENSIONS AND MARTERIALS..
1 of 1 A Table of Contents: 1 SCOPE.. 3 2 APPLICABLE STANDARDS..... 3 3 CATALOG NO. STRUCTURE..3 4 CONNECTOR SHAPE, DIMENSIONS AND MARTERIALS..3 5 ACCOMMOD CONDUCTORS (CIC).....3 6 PACKAGING CONDITION........3
More informationPRODUCT. Part. A1 Micro USB USB3140. Rev. Page. Description Doc USB3140.
1 PREL LIM MI IN AR RY 1.0 SCOPE. This specification covers performance, tests and quality requirements for the Receptacle (Type B, SMT, Vertical)..0 NAME AND PART NUMBER. Receptacle, 5 Pins, SMT, Type
More informationPRODUCT SPECIFICATION
1 of 10 H 1.0 GENERAL THIS SPECIFICATION COVERS.039 INCHES VERTICAL DDR II SOCKETS WITH BLANKED / FORMED CONTACT DESIGNED FOR PRINTED WIRING BOARD TO DUAL IN-LINE MEMORY MODULE INTERCONNECTION. IN ALL
More informationAPR 10 Rev. A
1. Introduction 1.1 Testing was performed on the DDR SODIMM SOCKET 200P to determine if it meets the requirement of Product Specification, 108-78628 1.2 Scope This report covers the electrical, mechanical
More informationPRODUCT SPECIFICATION
SCOPE 1.25mm 9(& 2$ 2 This specification covers the 1.25 mm PITCH WIRE TO BOARD CONNECTOR (DUAL TYPE) series PRODUCT NAME AND PART NUMBER
More informationSERIAL ATA POWER CONNECTOR 1.27 mm PITCH
: 1.27 mm PITCH TBLE OF CONTENTS 1.0 SCOPE 2.0 PPLICBLE DOCUMENTS 3.0 MTERIL SPECIFICTIONS 3.1 DESIGN ND CONSTRUCTION 3.2 MTERILS 4.0 PERFORMNCE ND TEST 5.0 TEST REQUIREMENTS ND PROCEDURES SHT 1 2 3 4
More informationQualification Test Report. Modular Plugs, Unshielded and Shielded
Qualification Test Report 501-131013 26 JAN 16 Rev. A Modular Plugs, Unshielded and Shielded 1. INTRODUCTION 1.1. Purpose Testing was performed on modular plugs to determine their conformance to the requirements
More informationDATA SHEET Metal Element Current Sensing Chip Resistor (Jumper) CLS Series
DATA SHEET Metal Element Current Sensing Chip Resistor (Jumper) 5% SIZE: 0805,1206 & 2512 RoHs Compliant January 19, 2017 V.5 DS-ENG-009 Page: 2 of 14 1. SCOPE 1.1 This specification is applicable to lead
More informationSurface Mount Power Resistor Thick Film Technology
Surface Mount Power Resistor Thick Film Technology DESIGN SUPPORT TOOLS click logo to get started Models Available FEATURES AEC-Q200 qualified 35 W at 25 C case temperature Surface mounted resistor - TO-263
More informationAMD Socket 940 Qualification Plan
AMD Socket 940 Qualification Plan Publication # 30353 Revision: 3.04 Issue Date: September 2003 2003 Advanced Micro Devices, Inc. All rights reserved. The contents of this document are provided in connection
More informationSurface Mount Multilayer Ceramic Chip Capacitors Prohibit Surface Arc-Over in High-Voltage Applications
Surface Mount Multilayer Ceramic Chip Capacitors Prohibit Surface Arc-Over in High-Voltage Applications ELECTRICAL SPECIFICATIONS FEATURES For this Worldwide Patented Technology Specialty: high-voltage
More informationSurface Mount Multilayer Ceramic Capacitors for Pulse Current Applications
Surface Mount Multilayer Ceramic Capacitors for Pulse Current Applications ELECTRICAL SPECIFICATIONS Note Electrical characteristics at +25 C unless otherwise specified FEATURES Low electrostrictive ceramic
More informationCONNECTORS, ELECTRICAL, RECTANGULAR, MICROMINIATURE, NON-REMOVABLE GAUGE 26 PCB PIN CONTACTS BASED ON TYPE 8MCG
Page 1 of 27 CONNECTORS, ELECTRICAL, RECTANGULAR, MICROMINIATURE, NON-REMOVABLE GAUGE 26 PCB PIN CONTACTS BASED ON TYPE 8MCG Issue 6 June 2018 Document Custodian: European Space Agency see https://escies.org
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. PRODUCT SPECIFICATION 1. SCOPE 1.0mm9(&FPC 2$ This specification covers
More informationSurface Mount Multilayer Ceramic Chip Capacitor Solutions for High Voltage Applications
Surface Mount Multilayer Ceramic Chip Capacitor Solutions for High Voltage Applications ELECTRICAL SPECIFICATIONS X7R GENERAL SPECIFICATION Note Electrical characteristics at +25 C unless otherwise specified
More informationSpezifikation Z56-xx Series ZIF FFC/FPC Connector 0,5mm Pitch Double Contact H1,96mm Piano
1 Scope This Specification covers the construction and characteristics of 0,5mm Pitch FFC and FPC (Flat Flexible Cable and Flat PCB Cable ) of Z56-xx ZIF Connector Series. The part shall satisfy the following
More informationSurface Mount Multilayer Ceramic Chip Capacitors for Safety Certified Applications
Surface Mount Multilayer Ceramic Chip Capacitors for Safety Certified Applications FEATURES Approved IEC 60384-14 Specialty: safety certified capacitors Wet build process Reliable Noble Metal Electrode
More informationAC Line Rated Ceramic Disc Capacitors Class X1, 760 V AC, Class Y1, 500 V AC
AC Line Rated Ceramic Disc Capacitors Class X1, 760 V AC, Class Y1, 500 V AC FEATURES Complying with IEC 60384-14 4 th edition Can pass 10 kv pulses (10 per polarity) Withstands 85 / 85 / 1000 h test Reduced
More information25, 35, 50, 63 Vdc. RoHS Compliant. Size Code ± 0.5 ± 0.3. F to
For filtering, Bypassing and Power Supply Decoupling with Long Life Requirements Using a ruggedized construction, type HZC_V withstands a 30 G vibration test. As the main countermeasure to vibration, the
More information5 mm Square Surface Mount Miniature Trimmers Multi-Turn Cermet Sealed
5 mm Square Surface Mount Miniature Trimmers Multi-Turn Cermet Sealed DESIGN SUPPORT TOOLS Models Available click logo to get started FEATURES 0.5 W at 70 C Professional and industrial grade Wide ohmic
More informationTITLE STATUS SPEC. NO. DATE PAGE NO. 3.5Φ EARPHONE JACK 4 POLEs / 2 SWITCH GENERAL SMT TYPE BS S-01
Specification TITLE STATUS SPEC. NO. DATE PAGE NO. 3.5Φ EARPHONE JACK 4 POLEs / 2 SWITCH GENERAL SMT TYPE BS123-000S-01 1 OF 4 1999/09/30 1. GENERAL SCOPE THIS SPECIFICATION COVERs THE GENERAL REQUIREMENTs
More informationQualification Test Report
Qualification Test Report 501-97 28Jun10 Rev E Connector, Shielded, Miniature Circular DIN, PCB Mounted 1. INTRODUCTION 1.1. Purpose Testing was performed on Tyco Electronics Mini DIN Printed Circuit Board
More informationSurface Mount Multilayer Ceramic Chip Capacitors for High Q Commodity Applications
VJ...WBC High Q Dielectric Surface Mount Multilayer Ceramic Chip Capacitors for High Q Commodity Applications ELECTRICAL SPECIFICATIONS Note Electrical characteristics at 25 C, 30 % to 70 % related humidity,
More information3mm Surface Mount, Single-Turn, Sealed Cermet Trimmers
TOCOS POTENTIOMETERS 3mm Surface Mount, Single-Turn, Sealed Cermet Trimmers RoHS Compliant IMPROVED DESIGN Pb-Free and Cd-Free Features 3mm square SMD, single-turn, sealed cermet trimmers Available in
More informationDATA SHEET General Purpose Thick Film Chip Resistor CR Series
Towards Excellence in Quality, Service & Innovation DATA SHEET General Purpose Thick Film Chip Resistor 1% TO 5%, TCR -200 TO +600 SIZE: 01005/0201/0402/0603/0805/1206/1210/2010/2512 RoHs Compliant Jan
More informationSurface Mounted Power Resistor Thick Film Technology
D2TO20 DIMENSIONS in millimeters 1.6 10.1 Surface Mounted Power Resistor 1.25 4.5 FEATURES 20 W at 25 C case temperature Surface mounted resistor - TO - 263 (D2 PAK) style package Wide resistance range
More information303139, FEATURES INTRODUCTION. TABLE 1 - TOLERANCE AND TCR VS. RESISTANCE VALUE (- 55 C to C, + 25 C ref.)
303139, 303140 Models # 303139 and 303140 - Molded Surface Mount Space and Military Grade Resistors SMRxDZ with Screen/Test Flow in Compliance with EEE-INST-002, (Tables 2A and 3A, Film/Foil, Level 1)
More informationSurface Mount Multilayer Ceramic Chip Capacitors DSCC Qualified Type 05007
Surface Mount Multilayer Ceramic Chip Capacitors DSCC Qualified Type 05007 FEATURES US defense supply center approved Federal stock control number, Available CAGE CODE 2770A Available Case size 1206 Stable
More informationAC Line Rated Ceramic Disc Capacitors Class X1, 760 V AC, Class Y1, 500 V AC
AC Line Rated Ceramic Disc Capacitors Class X1, 760 V AC, Class Y1, 500 V AC FEATURES Complying with IEC 60384-14 4 th edition High reliability Vertical (inline) kinked or straight leads Singlelayer AC
More informationSurface Mount Multilayer Ceramic Chip Capacitors with Integrated Resistor for High Pulse Current Applications
Surface Mount Multilayer Ceramic Chip Capacitors with Integrated Resistor for High Pulse Current Applications FEATURES Integrated resistor on the surface of the Available capacitor Low electrostrictive
More informationSolid Tantalum SMD Capacitors TANTAMOUNT, Hi-Rel COTS, Low ESR, Metal Case
Solid Tantalum SMD Capacitors TANTAMOUNT, Hi-Rel COTS, Low ESR, Metal Case PERFORMANCE CHARACTERISTICS Operating Temperature: -55 C to +125 C (above 85 C, voltage derating is required) Capacitance Range:
More informationFrelTec GmbH. Thick Film Chip Resistor SMD Low Ohm
GmbH Mathildenstr. 10A 82319 Starnberg Germany Thick Film Chip Resistor SMD Low Ohm 9/10/2012 1/13 GmbH www.freltec.com SPECIFICATION Part Number 016 05 * 001k * J * T05 ** *** Type Size Value Tolerance
More informationSeries FEATURES AND BENEFITS INTRODUCTION. Figure 1 Power Derating Curve. Table 1 Tolerance and TCR vs. Resistance
The 303143 Series Ultra The High-Precision 303143 Series Fixed Resistor Z-Foil Z201 Ultra High-Precision Fixed Resistor Z-Foil Z201 Screen/Test Flow as modified from S-311-P813 Proposed by NASA FEATURES
More information50 W Power Resistor, Thick Film Technology, TO-220
50 W Power Resistor, Thick Film Technology, TO-220 DESIGN SUPPORT TOOLS click logo to get started FEATURES 50 W at 25 C heatsink mounted Adjusted by sand trimming Leaded or surface mount versions High
More informationPower Resistor Thick Film Technology
Power Resistor Thick Film Technology LTO series are the extension of RTO types. We used the direct ceramic mounting design (no metal tab) of our RCH power resistors applied to semiconductor packages. FEATURES
More informationData sheet FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE ANDULTRAHIGH VOLTAGE. AEC-Q200 qualified. RoHS COMPLIANCE ITEM Halogen and Antimony Free
No.: RZC K HTS 0001 /6 Date: 2017. 4. 21 Data sheet Title: FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE ANDULTRAHIGH VOLTAGE Style: RZC50, 63 AEC-Q200 qualified RoHS COMPLIANCE ITEM Halogen and Antimony
More informationSpecifications: The shelf life of product is within 6 months. Features Description Test Conditions Requirements
Specifications: Operating Temperature Range : -25 C to+70 C Storage Temperature Range : -30 C to +80 C Current Range : 50mA, 12V DC The shelf life of product is within 6 months Test Sequence: Appearance
More informationSurface Mount Multilayer Ceramic Chip Capacitors for Ultra Small Commodity Applications
Surface Mount Multilayer Ceramic Chip Capacitors for Ultra Small Commodity Applications FEATURES High capacitance in unit size High precision dimensional tolerances Suitably used in high-accuracy automatic
More informationM2 SERIES THERMOSTATS 0 F to 240 F, Narrow Differential, Hermetically Sealed ½
M2 SERIES THERMOSTATS 0 F to 240 F, Narrow Differential, Hermetically Sealed ½ Introduction The Klixon M2 thermostat is constructed with a snap acting bimetal disc that serves as the actuating element.
More informationOpen-mode Design Capacitors
Open-mode Design Capacitors HOW TO ORDER OP 32 B 103 K 201 C T Series Size Dielectric Capacitance Tolerance Rated voltage Termination Packaging OP=Open-mode 21=0805 (2012) 31=1206 (3216) B=X7R Two significant
More informationMIL-PRF-39035, Char. H with a Smooth and Unidirectional Output
Accutrim 240 (RJ26 Style) Bulk Metal Foil Technology Ultra High Precision Trimming Potentiometers, / 4 " Square, RJ26 Style, Designed to Meet or Exceed The Requirements of MIL-PRF-905, Char. H with a Smooth
More informationHigh-Voltage Types Ordering Information, Mica Capacitors
High-Voltage Types Ordering Information, Mica Capacitors Ordering Information Ordering Information: Order by complete part number, as below. For other options,write your requirements on your quote request
More informationProsperity Dielectrics Co., Ltd. 1 ACS-1045 Rev15
1. DESCRIPTION MLCC consists of a conducting material and electrodes. To manufacture a chip-type SMT and achieve miniaturization, high density and high efficiency, ceramic condensers are used. WTC high
More information2D Patterns MODULAR & EASY-TO-INSTALL. turf.design 844 TURF OMG. pat e n t pending
Adhesive Tile by 2D Patterns MODULAR & EASY-TO-INSTALL Glass walls, concrete floors, and exposed ceilings are the leading cause of poor office acoustics. Most offices want an open office feel, but often
More informationDC Film Capacitors MKT Radial Lacquered Type
l 467 w FEATURES Available taped and loose in box RoHS compliant Seating plane (1) h APPLICATIONS Blocking and coupling, bypass and energy reservoir. α (2) l t REFERENCE STANDARDS IEC 60384-2 MARKING C-value;
More informationData sheet FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE RMC1/32,1/20,1/16S,1/16,1/10,1/8,1/4,1/2,1. AEC-Q200 qualified (Without RMC1/32)
No.: RMC-K-HTS-0006 /11 Date: 2017. 4. 18 Data sheet Title: Style: RMC1/32,1/20,1/16S,1/16,1/10,1/8,1/4,1/2,1 AEC-Q200 qualified (Without RMC1/32) RoHS COMPLIANCE ITEM Halogen and Antimony Free Note: Stock
More informationMetallized Polyester Film Capacitors MKT Radial Potted Types
www.vishay.com Metallized Polyester Film Capacitors MKT Radial Potted Types FEATURES Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS Blocking, bypassing,
More informationRF LOADS FIXED COAXIAL DC 22 GHz DETAIL SPECIFICATION
1/ 11 Titre / Title RF LOADS FIXED COAXIAL DC 22 GHz Rédigé par / Written by Responsabilité / Responsibility Date Signature S. POIZAT Space Project Manager Vérifié par / Verified by V. EUDELINE Space B.
More information30 W Power Resistor Thick Film Technology
30 W Power Resistor Thick Film Technology LTO series are the extension of RTO types. We used the direct ceramic mounting design (no metal tab) of our RCH power resistors applied to semiconductor packages.
More informationDC Film Capacitors MKT Axial Type
MKT 181 Ø d FEATURES Supplied loose in box, taped on ammopack or reel RoHS compliant L 40.0 ±.0 40.0 ±.0 Max. Dimensions in mm D Max. ENCAPSULATION Plastic-wrapped, epoxy resin sealed, flame retardant
More informationSMR1D/SMR3D. Vishay Foil Resistors FEATURES INTRODUCTION APPLICATIONS. TABLE 1 - THE SMRxD SERIES IS LISTED IN THE FOLLOWING DSCC SPECIFICATIONS
High Precision Bulk Metal Foil Molded Surface Mount Resistor with TCR down to ± 2 ppm/ C, Flexible Terminations, and Load Life Stability of ± 0.005 % (50 ppm) Any value at any tolerance available within
More information2W, 2816, SL Type Low Resistance Chip Resistor (Lead / Halogen Free)
2W, 2816, SL Type (Lead / Halogen Free) 1. Scope This specification applies to 4.2mm x 7.1mm size 2W, fixed metal foil current sensing resistors used in electronic equipment. 2. Features / Applications
More informationMetallized Polyester Film Capacitors MKT Radial Potted Type
www.vishay.com Metallized Polyester Film Capacitors MKT Radial Potted Type FEATURES 7.5 mm lead pitch Supplied loose in box and taped on reel or ammopack Material categorization: for definitions of compliance
More informationReference Only Spec. No. JEFL243B 0003F-01 P 1/ 6
Spec. No. JEFL243B 0003F-01 P 1/ 6 DC Common Mode Choke Coil PLT09HN2003R0P1B Reference Specification 1. Scope This reference specification applies to DC Common Mode Choke Coil (PLT09H Series). 2. Part
More informationDC Film Capacitors MKT Axial Type
MKT181 DC Film Capacitors MKT Axial Type FEATURES Supplied loose in box, taped on ammopack or reel Material categorization: For definitions of compliance please see www.vishay.com/doc?9991 APPLICATIONS
More informationSPECIFICATION FOR APPROVAL
SPECIFICATION FOR APPROVAL THICK FILM CHIP RESISTOR STANDARD TYPE CHIP RESISTOR ARRAY TYPE CHIP RESISTOR CONTENTS 1. STANDARD TYPE CHIP RESISTOR 1 2. ARRAY TYPE CHIP RESISTOR 4 3. THICK FILM CHIP RESISTOR
More informationHigh Ohmic/High Voltage Resistors
High Ohmic/High Voltage Resistors A metal glazed film is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive layer, tinned electrolytic copper wires are welded
More informationSMD Switch SI-C3436A General specification. Soldering conditions Reflow Soldering condition. Standard Reel Dimensions (mm) Packing specification
SMD Switch SI - C3436A - 7017 Features External Dimensions : 3.4mm x 3.6mm, Height 0.70mm Suitable for thinner and lighter portable devices Suitable for water proof devices Reflow soldering Package With
More informationSuper High AUTO (SHA) Series
PART NO. SFI1206SA240-1R5J 1.1 Technology Data Symbol Value Unit Maximum allowable continuous DC voltage V DC 12 V Breakdown voltage measured Vv 24(±10%) V Maximum clamping voltage V CLAMP < 40 V Maximum
More informationMULTILAYER CERAMIC CAPACITORS Low Inductance Series 0612 Size, 50V X7R Dielectric Halogen Free & RoHS Compliance
MULTILAYER CERAMIC CAPACITORS Low Inductance Series 0612 Size, 50V X7R Dielectric Halogen Free & RoHS Compliance *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_Low
More informationFMS series Metal Strip Shunt Lead Free Current Sensing Resistors
1. Features......2 2. Applications...... 2 3. Dimension and construction.. 2 4. Power Derating Curve....3 5. Rating.3 6. Part Number.. 3 7. Marking / Soldering..4 8. Reliability Performance..5 9. Packing.
More informationApplications: 1808 N 100 J 202 C T. Size Dielectric Capacitance Tolerance Rated Voltage Termination
Features: High voltage in a given case size. High stability and reliability. How To Order: MC Multicomp Description: The middle and high voltage series MLCC is designed by a special internal electrode
More informationDC Film Capacitors MKT Radial Potted Type
DC Film Capacitors MKT Radial Potted Type FEATURES 7.62 mm lead pitch. Supplied loose in box and taped on reel or ammopack AEC-Q200 qualified Material categorization: For definitions of compliance please
More informationDC Film Capacitors MKT Radial Lacquered Type
DC Film Capacitors MKT Radial Lacquered Type FEATURES Available taped and loose in box Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS Blocking and
More information*Contents in this sheet are subject to change without prior notice.
MULTILAYER CERAMIC CAPACITORS Soft Termination High Voltage Series (SH_200V to 3000V) NP0 & X7R Dielectrics 0603 to 1812 Sizes, 200V to 3000V Halogen Free & RoHS Compliance *Contents in this sheet are
More informationDC Film Capacitors MKT Radial Potted Type
DC Film Capacitors MKT Radial Potted Type FEATURES 15 mm to 27.5 mm lead pitch. Supplied loose in box and taped on reel Material categorization: for definitions of compliance please see www.vishay.com/doc?99912
More informationDC Film Capacitors MKT Radial Potted Type
DC Film Capacitors MKT Radial Potted Type MKT80 FEATURES AEC-Q00 qualified (rev. D) for PCM. mm (for larger available components on request) High temperature capabilities, up to 0 C Capacitance up to 60
More informationWLPM Series SMD Molded Power Inductors
WLPM25212 Series SMD Molded Power Inductors *Contents in this sheet are subject to change without prior notice. Page 1 of 1 ASC_WLPM25212 Series_V4. Jun. 217 Features 1. Shielded construction. 2. Ultra
More informationConfigurations: Dimension (mm) B (max) A (max) Item. Inductance Range. Item ISB ~ ISB ~ ISB ~ 1000.
SMT Shielded Power s ISB3, ISB4, ISB5 Configurations: FEATURES Magnetically shielded construction. Compact and thin. Wire burst resistant due to special construction. RoHS Compliant. APPLICATION DC-DC
More informationPower Resistor Thick Film Technology
Power Resistor Thick Film Technology DESIGN SUPPORT TOOLS click logo to get started FEATURES 50 W at 25 C case temperature heatsink mounted Direct mounting ceramic on heatsink Broad resistance range: 0.010
More informationBulk Metal Foil Technology Power and Current Sensing Resistors with TCR of 2 ppm/ C, Tolerance to ± 0.01 % and power up to 10 W
Bulk Metal Foil Technology Power and Current Sensing Resistors with TCR of 2 ppm/ C, Tolerance to ± 0.01 % and power up to 10 W Any value available within resistance range The basic features of Vishay
More informationFEATURES APPLICATIONS DESCRIPTION QUICK REFERENCE DATA. PILKOR components
FEATURES Excellent anti-surge characteristics Stable characteristics to moisture resistance even in high resistance range. Good replacement for ceramic plate resistors. APPLICATIONS Telecommunication Industrial
More informationMULTILAYER CERAMIC CAPACITORS Middle & High Voltage Series (200V to 4kV) 0402 to 1812 Sizes NP0, X7R & Y5V Dielectrics Halogen Free & RoHS compliance
MULTILAYER CERAMIC CAPACITORS Middle & High Voltage Series (200V to 4kV) 0402 to 1812 Sizes NP0, X7R & Y5V Dielectrics Halogen Free & RoHS compliance *Contents in this sheet are subject to change without
More informationPower Resistor for Mounting onto a Heatsink Thick Film Technology
DIMENSIONS in millimeters Power Resistor for Mounting onto a Heatsink Thick Film Technology FEATURES 300 W at 85 C bottom case temperature Wide resistance range: 0.3 Ω to 900 kω E24 series Non inductive
More informationAll part numbers in the coding below start with "TC-" and end with "203"
1. Scope: This specification for approval relates to 2. Type designation: The type designation shall be in the following form : All part numbers in the coding below start with "TC-" and end with "203"
More informationElectronics Corp. Multi-Layer Ceramic Capacitor. Lead-free termination is in compliance with the requirement of green plan and ROHS.
X5R, X7R Dielectrics Features A monolithic structure ensures high reliability and mechanical strength. High capacitance density. A wide range of capacitance values in standard case size. Suitable for high
More informationMULTILAYER CERAMIC CAPACITORS Open-Mode Series (50V to 630V) 0805 to 1812 Sizes X7R Dielectric Halogen Free & RoHS Compliance
MULTILAYER CERAMIC CAPACITORS Open-Mode Series (50V to 630V) 0805 to 1812 Sizes X7R Dielectric Halogen Free & RoHS Compliance *Contents in this sheet are subject to change without prior notice. Page 1
More informationMultilayer SMD Ceramic Capacitors General Purpose Series
Description: MLCC consists of a conducting material and electrodes. To manufacture a chip-type SMT and achieve miniaturization, high density and high efficiency, ceramic condensers are used. MLCC is made
More information