MF-RM Series - PTC Resettable Fuses
|
|
|
- Jared Hoover
- 6 years ago
- Views:
Transcription
1 *RoHS COMPLINT & **HLOGN FR Features Radial leaded devices Cured, flame retardant epoxy polymer insulating material meets UL 94V-0 requirements ulk packaging, tape and reel available Resettable circuit protection gency recognition: RoHS compliant* and alogen free** pplications Food blenders, coffee macines HVC lectric fans, blowers C adaptors MF-RM Series - PTC Resettable Fuses lectrical Caracteristics Model Typical Current Trip Limit I old I trip nvironmental Caracteristics Operating Voltage V max I max Initial Resistance Interrupt Voltage Interrupt Current Operating Temperature C to +85 C Humidity ging C, 85 % R.H. 000 ours...±0 % typical resistance cange Passive ging C, 000 ours...±0 % typical resistance cange Vibration... MIL-ST-883C, Metod 007.,...No cange Condition Solvent Resistance... MIL-ST-0, Metod 5...No cange Test Procedures nd Requirements For Model MF-RM Series R Min. One Hour Post-Trip Resistance R Max. Max. Time to Trip Item Test Conditions ccept/reject Criteria Visual/Mecanical... Verify dimensions and material...per MF pysical description Resistance... In still 3 C...R min R R max Time to Trip Vac, specifi ed current...t time to trip Hold Current... t Iold...No trip Trip Cycle Life Vac, I max, 00 cycles...no arcing or burning Trip ndurance... a) 40 Vac, I max, 4 ours...no arcing or burning b) 65 Vac, I max, 30 mins. Solderability... MIL-ST-0, Metod % min. coverage Tripped Power issipation () () (Vac) (Vac) () (Oms) (Oms) () (Sec.) (W) MF-RM005/ MF-RM008/ MF-RM0/ MF-RM06/ MF-RM05/ MF-RM033/ MF-RM040/ MF-RM055/ P Typ. UL File Number ttp:// Follow link to Certifi cations, ten UL File No., enter TÜV Certifi cate Number ttp:// cates/503433?locale=en&page_number=3 * RoHS irective 00/95/C Jan. 7, 003 including annex and RoHS Recast 0/65/U June 8, 0. ** ourns follows te prevailing definition of alogen free in te industry. ourns considers a product to be alogen free if (a) te romine (r) content is 900 ppm or less; (b) te Clorine (Cl) content is 900 ppm or less; and (c) te total romine (r) and Clorine (Cl) content is 500 ppm or less. Specifications are subject to cange witout notice.
2 dvantages Resettable feature wit overtemperature and overcurrent protection can save expensive components from aving to be replaced after tripping, e.g., transformers wit built in termal fuses Faster tan bimetallic switc designs tat take on average approximately 30 seconds to cool down and reset Generally lower electromagnetic interference tan bimetallic switces enefits Reduced repair and replacement costs Reduced nuisance tripping Combined overcurrent and overtemperature protector in one device MF-RX MF-RM Series - PTC Resettable Fuses Termal erating Cart - Iold (mps) mbient Operating Temperature Model -0 ºC 0 ºC 3 ºC 40 ºC 50 ºC 60 ºC 70 ºC 85 ºC MF-RM005/ MF-RM008/ MF-RM0/ MF-RM06/ MF-RM05/ MF-RM033/ MF-RM040/ MF-RM055/ Product imensions Model C Pysical Caracteristics Max. Max. Nom. Tol. ± Min. Max. Style Lead ia. Material MF-RM005/ (0.37) (0.508) (0.0) (0.08) (0.99) (0.50) (0.00) MF-RM008/ (0.37) (0.508) (0.0) (0.08) (0.99) (0.50) (0.00) MF-RM0/ (0.37) (0.508) (0.0) (0.08) (0.99) (0.50) (0.00) MF-RM06/ (0.390) (0.543) (0.0) (0.08) (0.99) (0.50) (0.00) MF-RM05/ (0.394) (0.787) (0.0) (0.08) (0.99) (0.50) (0.06) MF-RM033/ (0.449) (0.787) (0.0) (0.08) (0.99) (0.50) (0.06) MF-RM040/ (0.453) (0.83) (0.0) (0.08) (0.99) (0.50) (0.06) MF-RM055/ (0.55) (0.88) (0.0) (0.08) (0.99) (0.6) (0.03) Packaging options: ULK: 500 pcs. per bag. TP & RL: 000 pcs. per reel (MF-RM005/40~MF-RM040/40); 000 pcs. per reel (MF-RM055/40) 0.5 (4WG) (WG) 0.8 (0WG) IMNSIONS: Style Style Typical Part Marking Represents total content. Layout may vary. PRT INTIFICTION T CO (FIRST IGIT = LST IGIT OF YR; NXT THR IGITS = Y OF YR) RM055 00S MNUFCTURR'S TRMRK COUNTRY OF MNUFCTUR (T = TIWN S = CHIN) L I. C L I. C Specifi cations are subject to cange witout notice. Te device caracteristics and parameters in tis data seet can and do vary in different applications and actual device performance may vary over time. Users sould verify actual device performance in teir specific applications.
3 MF-RM Series - PTC Resettable Fuses Typical Time to Trip at 3 C How to Order Time to Trip (Seconds) 00 0 C F G H = MF-RM005/40 = MF-RM008/40 C = MF-RM0/40 = MF-RM06/40 = MF-RM05/40 F = MF-RM033/40 G = MF-RM040/40 H = MF-RM055/40 MF - RM 005 / 40 - Multifuse Product esignator Series RM = Radial Leaded Component Hold Current, I old (0.05 mps mps) Operating Voltage, V max 40 = 40 Vac Packaging Options - 0 = ulk Packaging - = Tape and Reel *Packaged per I Fault Current (mps) MF-RM SRIS, RV., /4 Specifications are subject to cange witout notice.
4 MF-RM Series Tape and Reel Specifications evices taped using I468 /IC6086- standards. See table below and Figures and for details. IC I imensions imension escription Mark Mark imensions Tolerance Carrier tape widt W W 8-0.5/+.0 (.709) (-0.0/+.039) Hold down tape widt W 0 W 4 (.433) min. Hold down tape No protrusion 3 Top distance between tape edges W W 6 (.8) 9-0.5/+0.75 Sprocket ole position W W 5 (.354) (-0.0/+0.03) 4 ±0. Sprocket ole diameter 0 0 (.57) (±.079) bscissa to plane (MF-RM005/40~MF-RM06/40) H H 8.5 ±3.0 (.78) (±.8) 6 ±0.5 bscissa to plane (MF-RM05/40~MF-RM055/40) H 0 H 0 (.63) (±.0) bscissa to top (MF-RM005/40~MF-RM06/40) H H 3. (.68) bscissa to top (MF-RM05/40~MF-RM055/40) H H 45.0 (.77) 43. Overall widt w/lead protrusion (MF-RM005/40~MF-RM06/40) C (.70) Overall widt w/lead protrusion (MF-RM05/40~MF-RM055/40) C (.05) 4.5 Overall widt w/o lead protrusion (MF-RM005/40~MF-RM06/40) C (.673) Overall widt w/o lead protrusion (MF-RM05/40~MF-RM055/40) C (.05).0 Lead protrusion I L (.039) Protrusion of cutout L L (.433) Protrusion beyond old-down tape I I Not specifi ed Sprocket ole pitc P 0 P 0.7 ±0.3 (.500) (±.0) Pitc tolerance 0 consecutive ± (±.039) evice pitc (MF-RM005/40-MF-RM040/40).7 ±0.3 (.500) (±.0) evice pitc (MF-RM055/40) 5.4 ±0.6 (.00) (±.04) Tape tickness t t 0.9 (.035).5 Tape tickness wit splice (MF-RM005/40~MF-RM040/40) t (.059).3 Tape tickness wit splice (MF-RM055/40) t (.09) Splice sprocket ole alignment 0 ±0.3 (±.0) ody lateral deviation Δ Δ 0 ± (±.039) ody tape plane deviation Δ p Δ p 0 ±0.3 (±.0) 3.8 ±0.7 Lead seating plane deviation ΔP P (.05) (±.08) Lead spacing F F /-0.5 (.00) (+.03/-.00) Specifications are subject to cange witout notice. IMNSIONS:
5 MF-RM Series Tape and Reel Specifications IC I imensions imension escription Mark Mark imensions Tolerance Reel widt (MF-RM005/40~MF-RM040/40) w w (.0) 63.5 Reel widt (MF-RM055/40) w w (.50) Reel diameter d a (4.57) 48.0 Space between fl anges (MF-RM005/40~MF-RM040/40) w (.89) 55.0 Space between fl anges (MF-RM055/40) w (.7) rbor ole diameter f c 6.0 ±.0 (.0) (±.47) Core diameter n 9.0 (3.58) ox (.5) (4.6) (4.6) Consecutive missing places 3 mpty places per reel 0. % Taped Component imensions - Figure IMNSIONS: p p Reference plane H P L F H H W 0 H 0 W W I I P 0 0 User direction of feed Cross section - Reel imensions - Figure t Reel f d User direction of feed Upper side Tape Lower side w Specifi cations are subject to cange witout notice.
PRCP-MSMF Series - Polymer Resettable Circuit Protectors
*RoHS COMPLINT & EC PPROVE 9 Features Compliant with EC-Q00 Rev-C- Stress Test Qualification for Passive Components in utomotive pplications 00 % electrically compatible with all previous generations of
MF-NSMF Series - PTC Resettable Fuses
*RoHS COMPLINT & EC PPROVED Features Compliant with EC-Q00 Rev-C Stress Test Qualification for Passive Components in utomotive pplications Compact design to save board space - 06 footprint Small size results
MF-NSMF Series - PTC Resettable Fuses
*RoHS and EC-Q00 COMPLINT Features n Compliant with EC-Q00 Rev-C Stress Test Qualification for Passive Components in utomotive pplications n Compact design to save board space - 06 footprint n Small size
MF-MSMF Series - PTC Resettable Fuses
*RoHS OMPLINT & E PPROVED Features ompliant with E-Q00 Rev-- Stress Test Qualification for Passive omponents in utomotive pplications 00 % electrically compatible with all previous generations of 8 SMT
MF-MSMF Series - PTC Resettable Fuses
*RoHS & E OMPLINT Features n ompliant with E-Q00 Rev-- Stress Test Qualification for Passive omponents in utomotive pplications n 00 % electrically compatible with all previous generations of 8 SMT devices
30Vdc Series ELECTRICAL CHARACTERISTICS
RLD P UF Series Devices 2009.10.07 The Radial Leaded devices (RLD Series), a polymer-based Positive Temperature Coefficient (PTC) device to protect electrical circuits against over-current conditions with
MF-MSMF Series - PTC Resettable Fuses
*RoHS and AE-Q00 OMPLIANT Features ompliant with AE-Q00 Rev-- Stress Test Qualification for Passive omponents 00 % electrically compatible with all previous generations of 8 SMT devices ompatible with
PPTC Resettable Fuse. Principles of PPTC Resettable Fuse. Typical PTC application. Products Selection Guide:
PPT Resettable use Principles of PPT Resettable use Polymer Positive Temperature oefficient (PPT) fuse is an overcurrent protection device that trips when a certain trip cur rent is exceeded. In contrast
DATA SHEET POSITIVE TEMPERATURE COEFFICIENT AC/DC POWER SUPPLY SMD0603 series
Product specification November 05, 201 V.0 DATA SHEET AC/DC POWER SUPPLY series RoHS compliant & Halogen free 2 Positive Temperature Coefficient (PTC) Data Sheet Description The 0603 series provides miniature
Bourns Multifuse Resettable Fuses - Polymer PTC & Ceramic PTC Short Form Catalog
ourns Multifuse Resettable Fuses - Polymer PT & eramic PT hort Form atalog ourns Multifuse Products ourns Multifuse family of Polymer Positive Temperature oefficient (PPT) resettable fuses are used in
Bourns Multifuse Resettable Fuses. Polymeric PTC & Ceramic PTC Short Form Brochure
ourns Multifuse Resettable Fuses Polymeric PT & eramic PT Short Form rochure ourns Multifuse Products The ourns Multifuse family of Polymeric Positive Temperature oefficient (PPT) resettable fuses are
DATA SHEET. Radial series Leaded ceramic multilayer capacitors. BCE Sud Passive Components Oct 16
DATA SEET File under BCE Sud Passive Components, 2003 Oct 16 BCE Sud Passive Components A former part of Philips Components FEATURES Very high capacitance per unit volume Low cost. APPLICATIONS These conformally
Ceramic PTC Thermistor: PT Series
Sensor Features. RoHS compliant 2. Small size 3. Very fast reaction time 4. Wide range of protection temperatures 5. Stable over a long life 6. Operating temperature range: 0 ~ Ts+25 C (V=Vmax) 7. Agency
Features Lead free as standard RoHS compliant* Leadless Low stored charge
*RoHS OMPLINT 6 Features Lead free as standard RoHS compliant* Leadless Low stored charge pplications ellular phones Ps esktop Ps and notebooks igital cameras MP3 players 85-xxxx products are currently
Varistor Products Radial Lead Varistors > ZA Series
RoHS Description The ZA Series of transient voltage surge suppressors are radial leaded varistors (MOVs) designed for use in the protection of low and medium-voltage circuits and systems. Typical applications
Resistance (R 25) Ω Ω Ω. Tolerance of R 25 M ±20% H ±25% S ±35%
Features 1. RoHS & Halogen-free compliant 2. EIA size 63,85,121 3. Suitable for reflow soldering 4. Suitable for over-current or short circuit protection 5. Agency Recognition: UL&cUL:File No.E138827 TUV:File
SFRV Polymer PTC Thermistor SFRV ROHS
Polymer PTC Thermistor ROHS Features High voltage endurance. Designed for telecom applications. Low parasitic capacitance, flat impedance with frequency. RoHS compliant and UL certificate(file No.:E305346).
Varistor Products Radial Lead Varistors > ZA Series
RoHS Description The ZA Series of transient voltage surge suppressors are radial leaded varistors (MOVs) designed for use in the protection of low and medium-voltage circuits and systems. Typical applications
RoHS COMPLIANCE ITEM Halogen and Antimony Free
Spec. No.: FRC K HTS 0001 /8 Date: 2017. 1. 10 Specification Title: Style: FRC16, 20, 32 RoHS COMPLIANCE ITEM Halogen an Antimony Free Prouct specification containe in this specification are subject to
CCDSeries FEATURES ORDERING CODE CCD B 101 K H 7 2 (1) (2) (3) (4) (5) (6) (7) (8) (9) Safety Standard Recognized Ceramic Capacitors
CCDSeries Configuration FEATURES Complying with IEC60384-14 4 th Edition Class X1Y1 and Class X1Y2 Dielectric Strength: AC2600V (r.m.s) for X1Y2 and AC4000V (r.m.s) for X1Y1 High Releability Coated With
52- Inner Taping dimension or 73- Inner Taping dimension ZB- Z version. UL = UL Version YY = Standard
Precision Fusible safety Wirewound Resistors Axial and SMD Version Ceramic core Flame retardant coating UL42 Recognized (file E330640) ORDERING CODE-Example New SAP Part Nr.: CRF 300 J T - 73-50R UL Serie
BS0300N-2C. Order Code: Exterior. Features. Agency Approvals. Schematic Symbol. Part SMB-T. Weight 88 mg Non degenerative RS485/232/422.
eatures xterior xcellent capability of absorbing transient surge Quick response to surge voltage(ns Level) liminates overvoltage caused by fast rising transients Moisture sensitivity level: Level 1 Weight
Ceramic PTC Thermistor: PPL Series
Features. RoHS compliant 2. Leaded type 3. Voltage rating: 270V ac ~500V ac 4. Resistance range:0~000ω 5. Stable over a long time 6. Operating temperature range: -20 ~ +85 C (V=V max ) -40 ~ +25 C (V=0)
30 to 35 ma G. Samples. Symbol Parameter Test Conditions Value Unit RMS on-state current T C = 80 C 20 A I T(AV)
Sxx20x & Sxx25x Series RoHS Description Excellent unidirectional switches for phase control applications such as heating and motor speed controls. Standard phase control SCRs are triggered with few milliamperes
Axial Leads/SpinGuard
GENERAL DESCRIPTION AVX SA Series Conformally Coated Axial Leaded MLC Temperature Coefficients: C0G (NP0), X7R, X5R, Z5U 10, 50, 100, 200 Volts Case Material: Epoxy (Flame Retardant to UL Bulletin 492,
PTS Volt DC surface mount resettable PTC devices. Technical Data Applications. Agency information.
Supersedes August 2014 Pb HALOGEN HF FREE Applications USB Peripherals Disk drives Power tools Rechargeable battery pack protection Plug and play protection for motherboards and peripherals Mobile phones
DC/DC Power Modules W
PKV 3000 I PKV 5000 I DC/DC Power Modules 1.65 3 W PKV 3000 I PKV 5000 I Wide input voltage range, 9 36V, 18 72V Hig efficiency 74 83% typical Low idling power Full output power up to +75 C ambient temperature
DATA SHEET Metal Element Current Sensing Chip Resistor (Jumper) CLS Series
DATA SHEET Metal Element Current Sensing Chip Resistor (Jumper) 5% SIZE: 0805,1206 & 2512 RoHs Compliant January 19, 2017 V.5 DS-ENG-009 Page: 2 of 14 1. SCOPE 1.1 This specification is applicable to lead
V V I H. T Part Number Marking
Phillip Havens Oct 2008 SIDCtor Protection Thyristors SDP Biased Series - 5x6 QN RoHS Pb e3 Description This new SDP Biased series provides overvoltage protection for applications such as VDSL2, DSL2,
CPTC Thermistor: PP Series
Features. RoHS compliant 2. Lead type 3. Voltage rating: 270Vac~500Vac 4. Resistance range:0~000ω 5. Stable over a long time 6. Operating temperature range: -20 ~ +85 C (V=Vmax) -40 ~ +25 C (V=0) 7. Agency
1W, 1206, Low Resistance Chip Resistor (Lead free / Halogen Free)
1W, 1206, (Lead free / Halogen Free) 1. Scope This specification applies to 1.6mm x 3.2mm size 1W, fixed metal film chip resistors rectangular type for use in electronic equipment. 2. Type Designation
2W, 2816, SL Type Low Resistance Chip Resistor (Lead / Halogen Free)
2W, 2816, SL Type (Lead / Halogen Free) 1. Scope This specification applies to 4.2mm x 7.1mm size 2W, fixed metal foil current sensing resistors used in electronic equipment. 2. Features / Applications
Teccor brand Thyristors 0.8 Amp Sensitive SCRs
EC103xx & SxSx Series RoHS Description Excellent unidirectional switches for phase control applications such as heating and motor speed controls. Sensitive gate SCRs are easily triggered with micromps
BS0060N-2C. Order Code: B006N2C. Exterior. Features. Agency Approvals. Schematic Symbol. Part SMB-T. Weight:88mg Non degenerative. Video.
eatures xterior xcellent capability of absorbing transient surge Quick response to surge voltage(ns Level) liminates overvoltage caused by fast rising transients Moisture sensitivity level: level 1 Weight:88mg
AOZ Ultra Low Capacitance One-line Bi-directional TVS Diode. Features. General Description. Applications. Signal Line
Ultra Low Capacitance One-line Bi-directional TVS Diode General Description The is an ultra low capacitance one-line bi-directional transient voltage suppressor diode designed to protect high speed data
3mm Surface Mount, Single-Turn, Sealed Cermet Trimmers
TOCOS POTENTIOMETERS 3mm Surface Mount, Single-Turn, Sealed Cermet Trimmers RoHS Compliant IMPROVED DESIGN Pb-Free and Cd-Free Features 3mm square SMD, single-turn, sealed cermet trimmers Available in
C310T-SC 3.6 mm x 10 mm Time-delay, axial lead ceramic tube fuses
Pb HALOGEN HF FREE Applications Primary circuit protection: Power supplies LED and general lighting Consumer electronics Desktop, laptop and notebook Test equipment Agency information curus Recognition
Wrap-and-Fill Oval Configuration Metalized Polyester Film Capacitors
Type 431P Wrap-and-Fill Oval Configuration Metalized Polyester Film Capacitors EECTRICA SPECIFICATIONS Capacitance Range:.1 μf to 15. μf Voltage Rating: 63 VC to 63 VC 4 VRMS to 22 VRMS Capacitance Tolerance:
Interference suppression film capacitors MKP 336 1
MKP RADIAL POTTED TYPE PITCH /15/22.5/27.5 mm l b h lt P d t CBA196 Fig.1 Simplified outlines. FEATURES to 27.5 mm lead pitch Supplied loose in box and taped on reel Consists of a low-inductive wound cell
APPROVAL SHEET FOR AL. ELECTROLYTIC CAPACITORS
NO : ED-A5540 TO : APPROVED APPROVAL SHEET FOR AL. ELECTROLYTIC CAPACITORS : BY: Series Description Part No. HV series, PLEASE RETURN US ONE COPY YOUR SIGED SPECIFICATION AFTER YOU APPROVED OF IT. APPROVED
LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only. FOUR DIGIT LED DISPLAY(0.39Inch) Lead-Free Parts DATA SHEET LFD415/65-XX/RP6-PF REV.
LIITK LTRONIS O.,LT. OUR IIT L ISPLY(0.39Inch) Pb Lead-ree Parts L415/65-XX/RP6-P T SHT O. NO : QW0905- L415/65-XX/RP6-P RV. : T : 16 - Jul. - 2007 PRT NO. L415/65-XX/RP6-P Page 1/8 Package imensions LIITK
Capacitance range: 0.01 mf to 2.2 mf Rated voltages: 630 VDC 1000 VDC 1600 VDC 2000 VDC 3000 VDC 4000 VDC
WIMA Snubber FKP Snubber FKP Capacitors for High Pulse Applications with Metal Foil Electrodes, Schoopage Contacts and Self-Healing Internal Series Connection Special Features High pulse duty Self-healing
2016 PRELIM 2 PAPER 2 MARK SCHEME
06 River Valley Hig Scool Prelim Paper Mark Sceme 06 PRELIM PAPER MARK SCHEME (a) V 5.00 X 85. 9V 3 I.7 0 X V I X V I X 0.03 0. 85.9 5.00.7 X 48.3 00 X X 900 00 [A0] Anomalous data can be identified. Systematic
Super Bright LEDs, Inc.
Package Dimensions Notes: 1.All dimensions are in millimeters 2.Tolerances unless dimensions ±0.25mm Absolute Maximum Ratings (Ta=25 ) Parameter Symbol Rating Unit Forward Current I F 700 ma Reverse Voltage
Radial Leads/SkyCap /AR Series
Radial Leads/SkyCap /AR Series AUTOMOTIVE GENERAL INFORMATION AVX AR Series Conformally Coated Radial Leaded MLC Temperature Coefficients: C0G (NP0), X7R, X8R 200, 100, 50 Volts Case Material: Epoxy Lead
Symbol Parameter Test Conditions Value Unit Sxx15L T C. = 90 C 15 RMS on-state current Sxx16R = 90 C 9.5 I T(AV) Sxx16R
Sxx15x & Sxx16x Series RoHS Description Excellent unidirectional switches for phase control applications such as heating and motor speed controls. Standard phase control SRs are triggered with few milliamperes
DATA SHEET ARRAY CHIP RESISTORS YC/TC 164 (8Pin/4R; Pb Free) 5%, 1% sizes
DATA SHEET ARRAY CHIP RESISTORS 164 (Pin/4R; Pb Free) 5%, 1% sizes 4 0603 Supersedes Date of Mar. 06, 2003 2 SCOPE This specification describes YC164 (convex) and TC164 (concave) series chip resistor arrays
CPTC Thermistor:PT Series
Sensor Features 1. RoHS compliant 2. Small size 3. Very fast reaction time 4. Wide range of protection temperatures 5. No need reset supply after protection 6. Stable over along life 7. Operating temperature
Qxx15xx & Qxx16xHx Series
Teccor brand Thyristors Description 15 mp and 16 mp bi-directional solid state switch series is designed for C switching and phase control applications such as motor speed and temperature modulation controls,
PTL Series Slide Potentiometer w/led
*RoHS COMPIANT Features n Carbon element n Red, orange, green, amber and white colors n Center detent option n Assortment of resistance tapers n Various travel lengths n Various lever sizes PT Series Slide
QF K A B C D A : Series Name. D : Inductance Tolerance. ( K=±10% ) B : Dimension. C : Inductance. (220uH ) CIRCUIT
SPECIFICTION HF COMPLINT 1.MECHNICL & DIMENSIONS B B (UNIT: mm) 5.2±.5 4.5±.5 C 5.8±.5 D D a 1.5ref 5.5ref C b c 2.15ref 1.7ref b CIRCUIT c a S PCB Layout F 2.ELECTRICL REQUIREMENTS: PRMETER SPECIFICTION
Metal-Case Tubular Metalized PPS Film Capacitors
Metalized Polyphenylene Sulfide Metal-Case Tubular Metalized PPS Film Capacitors Type 820P EECTRICA SPECIFICATIONS Capacitance Range: 0.01 μf to 15.0 μf C Voltage Range: 50 VC to 400 VC AC Voltage Range:
DATA SHEET LFD315/65-XX-PF 發行 立碁電子 DCC. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only. FOUR DIGIT LED DISPLAY (0.36 Inch) Pb REV.
OUR IIT L ISPLY (0.36 Inch) Pb Lead-ree Parts L315/65-XX-P T SHT O. NO : QW0905- L315/65-XX-P-08 RV. : T : 01 - Sep. - 2009 發行 立碁電子 PRT NO. L315/65-XX-P Page 1/8 Package imensions 29.5(1.161") 7.1(0.28")
Produkt Information. Ultra Low Ohm (Metal Strip) Chip Resistor (LR Series) Scope. Features. Applications. Construction
Scope Ultra Low Ohm (Metal Strip) Chip Resistor (LR Series) -This specification applies to all sizes of rectangular-type fixed chip resistors with alloy as mater. Features -High power rating up to 3 Watts
AC Line Rated Ceramic Disc Capacitors Class X1, 760 V AC, Class Y1, 500 V AC
AC Line Rated Ceramic Disc Capacitors Class X1, 760 V AC, Class Y1, 500 V AC FEATURES Complying with IEC 60384-14 4 th edition Can pass 10 kv pulses (10 per polarity) Withstands 85 / 85 / 1000 h test Reduced
Electrical Specifications. Resistance Power Rating. Maximum. Temperature 70ºC 1% 5% 300V. 2 Amp 400V RMCF2512 1W.
Features: RMCF standard power ratings RMCP high power ratings Nickel barrier terminations standard Power derating from 100% at 70ºC to zero at +155ºC RMCF package sizes 0402 through 2512 are qualified
Symbol Parameter Value Unit RMS on-state current (full sine wave) Qxx35P5 T C. f = 120 Hz T J. 10 μs I GT
Description 30 mp / 35 mp bi-directional solid state switch series is designed for C switching and phase control applications such as motor speed and temperature modulation controls, lighting controls,
COMMODITY:SURFACE MOUNT CHIP LED LAMP DEVICE NUMBER:HL-HUB35A-TRB
COMMODITY:SURFACE MOUNT CHIP LED LAMP DEVICE NUMBER:HL-HUB35A-TRB SHEET DATE 1 2 3 4 5 6 7 CONTENTS 2002.11.19 1.0 1.0 1.0 1.0 1.0 1.0 1.0 Initial Released TOTAL PAGE 7 Page 1 of 8 ELECTRICAL AND OPTICAL
SPECIFICATION WHITE SIDE VIEW LED. Customer. Approved by Approved by Approved by / / / Supplier. Drawn by Checked by Approved by / / /
SPECIFICATION ITEM MODEL WHITE SIDE VIEW LED CUSTOMER Customer Approved by Approved by Approved by / / / Supplier Drawn by Checked by Approved by / / / Contents 1. Features 2. Applications 3. Absolute
AOZ8212ACI-05. Two-line Bi-directional TVS Diode. General Description. Features. Applications
Two-line Bi-directional TVS Diode General Description The is a two-line bi-directional transient voltage suppressor diode designed to protect voltage sensitive electronics from high transient conditions
AC Line Rated Ceramic Disc Capacitors Class X1, 760 V AC, Class Y1, 500 V AC
AC Line Rated Ceramic Disc Capacitors Class X1, 760 V AC, Class Y1, 500 V AC FEATURES Complying with IEC 60384-14 4 th edition High reliability Vertical (inline) kinked or straight leads Singlelayer AC
Electrical Specifications
Features: Lower-cost alternative to carbon comps and wirewounds Coating meets UL 94V-0 Meets solvent test of Mil Standard 202, Method 25 Cut and formed product is available on select sizes; contact factory
NTC Thermistor:TCF Type
Features 1. RoHS compliant 2. Body size ψ3mm 3. Radial lead resin coated 4. -40 ~ +100 operating temperature range 5. Wide resistance range 6. Cost effective 7. Agency recognition: UL /cul Recommended
Interference Suppression Film Capacitors MKP Radial Potted Type
Interference Suppression Film Capacitors MKP 336 6 Y2 l w FEATURES 10 mm to 15 mm lead pitch. Supplied loose in box, taped on reel Compliant to RoHS directive 2002/95/EC h PERMISSIBLE C VOLTAGE C V P ±
EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet High Power LED 1W (Preliminary)
Features Feature of the device: small package with high efficiency Typical color temperature: 3500 K. Typical view angle: 120. Typical light flux output: 33 lm @ 350mA ESD protection. Soldering methods:
WW12C, WW08C, WW06C, WW04C, WW02C. Low ohm chip resistors ( power ) Size 1206, 0805, 0603, 0402, 0201
WW12C, WW08C, WW06C, WW04C, WW02C ±5%, ±1%, ±0.5% Low ohm chip resistors ( power ) Size 1206, 0805, 0603, 0402, 0201 *Contents in this sheet are subject to change without prior notice. Page 1 of 8 ASC_WWxxC_V05
EAPL4040WA1. SMD Side View LEDs PRELIMINARY. Features. Applications.
SMD Side View LEDs PRELIMINARY Features Fluorescence Type High Luminous Intensity High Efficiency Pb-free. The product itself will remain within RoHS compliant version. ESD protection. Applications OA
NTC Thermistor for Automotive: TTC3-C Series
Features 1. Qualification based on AEC-Q200 Rev-D 2. RoHS compliant 3. Halogen-Free(HF) series are available 4. Body size: Ф3mm 5. Operating temperature range: -55 ~+150 Recommended Applications 1. Car
ARITEC Ceramic Capacitor TABLE OF CONTENTS
Ceramic Capacitor TLE OF CONTENTS Page EI Temperature Characteristic...2 MLCC RDIL & XIL Class I...3 Class II, III...4 Range Chart (Radial)...5 Mechanical specification (Radial)...6 Packing specification
Samples. Symbol Parameter Test Conditions Value Unit RMS on-state current T C = 90 C 55 A I T(AV) Average on-state current T C
Sxx55x Series RoHS Description Excellent unidirectional switches for phase control applications such as heating and motor speed controls. Standard phase control SCRs are triggered with few milliamperes
Specifications J series Part Number Rated urrent Resistivity Working J03 (0201 Type) J05 (0402 Type) 0.5(70 ) 1(70 ) How to alculate Rated Voltage Pow
Structure and material imensions c d Specifications L c d W T Features Low Noise Nickel arrier Terminations pplication General Purpose ode Structure Material oating Glass or Resin Resistor Type(I Size)
PTC Thermistor:TPM-S Series
SMD PTC Thermistor for Features 1. RoHS & Halogen-free compliant 2. Thermistor chip with lead-free tinned terminals 3. EIA size 0402,0603,0805 4. Fast and reliable response 5. Suitable for reflow soldering
Metallized polyester film capacitors MKT 470
MKT RADIAL POTTED TYPE PITCH 5 mm CBA141 Fig.1 Simplified outlines. FEATURES Low-inductive wound cell of metallized (PETP) film Potted with epoxy resin in a flame-retardant case Radial leads of solder-coated
SS V Subminiature, radial leaded, time-delay fuses
Supersedes August 2013 250 V Subminiature, radial leaded, time-delay fuses Pb HALOGEN HF FREE Product description Radial leaded, time delay with low breaking capacity Designed to IEC60127-3 Sheet 4 Plastic
B06NC Exterior. Features. Schematic Symbol. Part SMB-F. Weight:87mg Non degenerative Bi-directional. Specification` Icon. Description.
Features xcellent capability of absorbing transient surge Quick response to surge voltage (ns Level) liminates overvoltage caused by fast rising transients Moisture sensitivity level: level 1 Weight:87mg
Radial Leaded Multilayer Ceramic Capacitors For Automotive Applications Class 1 and Class 2, 50 V DC, 100 V DC, 200 V DC
Radial eaded Multilayer Ceramic Capacitors For Automotive Applications Class 1 and Class 2, 50 V DC, 100 V DC, 200 V DC FEATURES AEC-Q200 qualified with PPAP available igh reliability MCC insert with wet
2N7002. Features and Benefits. Product Summary. Description and Applications. Mechanical Data. Ordering Information (Note 5) Marking Information
YM N-CHANNEL ENHANCEMENT MOE FIEL EFFECT TRANSISTOR Product Summary BV SS R S(ON) Max I Max T A = + C V 7.Ω @ V GS = V ma escription and Applications This MOSFET has been designed to minimize the on-state
Electromagnetic Interference Suppression Capacitors Class X2 305/310VAC TECHNICAL SPECIFICATION. Metallized Polypropylene Film Capacitors (MKP)
Electromagnetic Interference Suppression Capacitors Class X2 305/310VAC ISKRA, d.d. Type: KNB1580 Issue: April 2018 PE ISKRA KONDENZATORJI d.d., Vajdova ulica 71, 8333 Semič, SLOVENIA Phone: +386 738 49
WW25R ±1%, ±5%, 2W Metal plate low ohm power chip resistors Size 2512 (6432)
WW25R ±1%, ±5%, 2W Metal plate low ohm power chip resistors Size 2512 (6432) Current Sensing Type Automotive AEC Q200 compliant *Contents in this sheet are subject to change without prior notice. Page
NTC Thermistor:TTF Type
Features 1. RoHS compliant 2. Radial leaded insulation film coated 3. -40 ~ +100 operating temperature range 4. Agency recognition: UL /cul Recommended Applications 1. Home appliances (air conditioner,
WW25Q ±1%, ±5%, 1W Metal plate low ohm power chip resistors Size 2512 (6432)
WW25Q ±1%, ±5%, 1W Metal plate low ohm power chip resistors Size 2512 (6432) Current Sensing Type Automotive AEC Q200 compliant *Contents in this sheet are subject to change without prior notice. Page
List... Package outline... Features Mechanical data... Maximum ratings... Rating and characteristic curves... Pinning information...
List List... Package outline... 1 Features... Mechanical data... Maximum ratings... Rating and characteristic curves... 3 Pinning information... 4 Marking... 4 Tube packing... 4 Suggested thermal profiles
Fixed Voltage Q2L Series 3.3x3.3 QFN
RoHS Pb e3 Fixed Voltage Q2L Series are uni-directional SIDACtor devices designed to protect SLICs (Subscriber Line Interface Circuit from damaging overvoltage transients. The series provides single line
All part numbers in the coding below start with "TC-" and end with "203"
1. Scope: This specification for approval relates to 2. Type designation: The type designation shall be in the following form : All part numbers in the coding below start with "TC-" and end with "203"
SMD Side View LEDs LM2C/L7580S76/TR8-T
Features Side view white LED. White SMT package. Lead frame package with individual 2 pins. Wide viewing angle Soldering methods: IR reflow soldering Pb-free The product itself will remain within RoHS
WW12E, WW08E, WW06E ±5%, ±1% Thick film low ohm chip resistors Size 1206, 0805, 0603 RoHS Exemption free and Halogen free
WW12E, WW08E, WW06E ±5%, ±1% Thick film low ohm chip resistors Size 1206, 0805, 0603 RoHS Exemption free and Halogen free *Contents in this sheet are subject to change without prior notice. Page 1 of 7
3R3K SPECIFICATION FOR APPROVAL. Wound Chip Inductor. Ⅰ. Configuration and dimensions: Ⅲ. General specification: REF. : WL (Series) PROD.
SPEIFIIO FOR PPROVL Ⅰ. onfiguration and dimensions: ME REV. 201715-L PE 1/8 Marking Inductance code H F F E I I ( P Pattern ) 4. ±0.3 3.20 ±0.2 3.20 ±0.2 4.20 ±0.2 E 1.20 F +0.3-0.0 2.20 H 1.60 Unit:m/m
Radial Leaded Multilayer Ceramic Capacitors For Automotive Applications Class 1 and Class 2, 50 V DC, 100 V DC, 200 V DC
Radial eaded Multilayer Ceramic Capacitors For Automotive Applications Class 1 and Class 2, 50 V DC, 100 V DC, 200 V DC FEATURES AEC-Q200 qualified with PPAP available igh reliability MCC insert with wet
Characteristic Symbol Value Units V GSS
NEW PROUCT Features Low On-Resistance: R S(ON) Low Gate Threshold Voltage Low Input Capacitance Fast Switching Speed Low Input/Output Leakage Complementary Pair lso vailable in Lead Free Version Mechanical
Bottom View. Part Number Case Packaging DMP1005UFDF-7 U-DFN (Type F) 3,000/Tape & Reel DMP1005UFDF-13 U-DFN (Type F) 10,000/Tape & Reel
YM AVANCE INFORMATION Product Summary BV SS -12V R S(ON) Max I Max T C = +25 C 8.5mΩ @ -26A 12mΩ @ V GS = -2.5V -22A P-CHANNEL ENHANCEMENT MOE MOSFET Features and Benefits.6mm Profile Ideal for Low Profile
3/4W, 2010 Low Resistance Chip Resistor
1. Scope 3/4W, 2010 This specification applies to 2.5mm x 5.0mm size 3/4W, fixed metal film chip resistors rectangular type for use in electronic equipment. 2. Type Designation RL2550 L - Where (1) (2)
NTC Thermistor:TTC05 Series
NTC Thermistor:TTC05 Series Ф5 mm Lead Type for Temperature Sensing/Compensation Features. RoHS compliant 2. Halogen-Free (HF) series are available 3. Body size: Ф5mm 4. Radial lead resin coated 5. Operating
Electrical Specifications - RMCF. Resistance Power Rating. Maximum Ohmic Range (Ω) and Tolerance (2) Temperature 70ºC. 30V 0.
Features: RMCF standard power ratings RMCP high power ratings Nickel barrier terminations standard Power derating from 100% at 70ºC to zero at +155ºC RMCF package sizes 0402 through 2512 are qualified
B11ND BS1100N-D1. Suppresser Features. ThyristorSurge. Exterior. Package (top. view) Schematic Symbol. Part SMB-F
Features xcellent capability of absorbing transient surge Quick response to surge voltage(ns Level) liminates overvoltage caused by fast rising transients Moisture sensitivity level: level 1 Weight:87mg
EVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet High Power LED 0.5W (Preliminary) Features Feature of the device: small package with high efficiency Typical view angle: 120 Typical color temperature: 3500 K. ESD protection. Soldering
SMD Side View LEDs EAPL3810A17
Features Side view white LED. White SMT package. Lead frame package with individual 2 pins. Wide viewing angle Soldering methods: IR reflow soldering Pb-free ESD protection. The product itself will remain
FrelTec GmbH. Metal Film Resistor
GmbH Mathildenstr. 10A 82319 Starnberg Germany Metal Film Resistor 10/5/2010 1/21 Freltec GmbH www.freltec.com SPECIFICATION Part Number 052 012 * N * J * TB * E * 1 * _ * _ * Type 052 : Metal Film Resistor
Surface Mounted Power Resistor Thick Film Technology
D2TO20 DIMENSIONS in millimeters 1.6 10.1 Surface Mounted Power Resistor 1.25 4.5 FEATURES 20 W at 25 C case temperature Surface mounted resistor - TO - 263 (D2 PAK) style package Wide resistance range
SMD Side View LEDs LM2C/L7277SG6/TR8-T
Features Side view white LED. White SMT package. Lead frame package with individual 2 pins. Wide viewing angle Soldering methods: IR reflow soldering Pb-free The product itself will remain within RoHS
For the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between the primary and the secondary circuit.
Current Transducer GO-SMS series I P N = 10... 30 A Ref: GO 10-SMS, GO 20-SMS, GO 30-SMS For the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between the primary and the