30Vdc Series ELECTRICAL CHARACTERISTICS
|
|
|
- Lindsey Stephens
- 5 years ago
- Views:
Transcription
1 RLD P UF Series Devices The Radial Leaded devices (RLD Series), a polymer-based Positive Temperature Coefficient (PTC) device to protect electrical circuits against over-current conditions with resettable feature, is fully compatible with current industrial standards. The Radial Leaded devices designed to provide different product series offering Vdc and 60Vdc voltage with a maximum A short circuit rating. Applications: The radial leaded product series is ideal for computers and peripherals, general electronics and can be applied to almost anywhere there is a low voltage power supply and a load to be protected. Agency Approval: UL/CSA File # E TÜV Certificate # R Vdc Series ELECTRICAL CHARACTERISTICS Part Number RLDP090UF RLDP110UF RLDP135UF RLDP160UF RLDP185UF RLDP250UF RLDP0UF RLDP0UF RLDP500UF RLDP600UF RLDP700UF RLDP800UF RLDP900UF I hold (A) I trip (A) V max (Vdc) I max (A) P d typ. (W) Maximum Time To Trip Current Time (A) (Sec.) Resistance R min (Ω) R 1max (Ω) Agency Approval Note: I hold = Hold current: maximum current device will pass without tripping in 23 still air. I trip = Trip current: minimum current at which the device will trip in 23 still air. V max = Maximum voltage device can withstand without damage at rated current (I max) I max = Maximum fault current device can withstand without damage at rated voltage (V max ) P d = Power dissipated from device when in the tripped state at 23 still air. R min = Minimum resistance of device in initial (un-soldered) state. R 1max = Maximum resistance of device at 23 measured one hour after tripping. Caution: Operation beyond the specified rating may result in damage and possible arcing and flame. Recognitions: UL, CSA, TUV recognized. Specifications are subject to change without notice. Page 1 of 10
2 RLD P UF Series Devices How to Select a Polymer PTC fuse: (1) Determine the following operating parameters for the circuits: (A) Normal Operating Current (I hold) (B) Maximum Circuit Voltage (V max) (C) Maximum Interrupt Current (I max) (D) Normal Operating Temperature (min /max ) (2) Select the device form factor and dimension suitable for the application: Surface Mount Device (SMD Series) Radial Leaded Device (RLD Series) Axial Leaded Strap Device (STD Series) Other Custom-designed Device (Disc/Chip) (3) Compare the maximum ratings for V max and I max of the PTC device with the circuit in application and make sure that the circuit s requirement does not exceed the device ratings. (4) Check that the PTC device s trip time (time-to-trip) will protect the circuit. (5) Verify that the circuit operating temperatures are within the PTC device s normal operating temperature range. (6) Verify the performance and suitability of the chosen PTC device in the application. Page 2 of 10
3 RLD P UF Series Devices THERMAL DERATING CURVE FOR RLD Vdc SERIES Percentage of Rated Current Device's Ambient Temperature ( ) THERMAL DERATING CHART FOR RLDV SERIES I hold (Amps) Model Ambient Operation Temperature RLDP090UF RLDP110UF RLDP135UF RLDP160UF RLDP185UF RLDP250UF RLDP0UF RLDP0UF RLDP500UF RLDP600UF RLDP700UF RLDP800UF RLDP900UF Page 3 of 10
4 RLD P UF Series Devices AVERAGE TIME-CURRENT CURVE FOR RLD Vdc SERIES Time to Trip(sec) A B C D E F G H K I J L M A=RLDP090UF B= RLDP110UF C=RLDP135UF D= RLDP160UF E=RLDP185UF F=RLDP250UF G=RLDP0UF H=RLDP0UF I=RLDP500UF J=RLDP600UF K=RLDP700UF L=RLDP800UF M=RLDP900UF Fault Current(A) PART NUMBERING SYSTEM RLD P F Lead Free Product U: Vdc Series Current Rating Polytronics Symbol Voltage Rating Radial Leaded Device Page 4 of 10
5 RLD P UF Series Devices RLD P Series Figure PHYSICAL DIMENSIONS (mm) A B C D E Y Physical Characteristics Part Number (max.) (max.) (typ.) (min.) (max.) (typ.) Lead Material RLDP090UF RLDP110UF RLDP135UF RLDP160UF RLDP185UF RLDP250UF RLDP0UF RLDP0UF RLDP500UF RLDP600UF RLDP700UF RLDP800UF RLDP900UF ± 10.2± 10.2± 10.2± 10.2± Specifications are subject to change without notice. Fe Fe Fe Fe Fe Page 5 of 10
6 RLD P UF Series Devices ENVIRONMENTAL SPECIFICATIONS Operating/Storage - to +85 Temperature Maximum Device Surface 125 Temperature in Tripped State Passive Aging +85, 1000 hours ±5% typical resistance change Humidity Aging +85, 85%R.H hours ±5% typical resistance change Thermal Shock +85 to - 10 times ±5% typical resistance change Solvent Resistance MIL-STD-202, Method 215F No change PHYSICAL SPECIFICATIONS Lead Material Soldering Characteristics Insulating Material Device Labeling P090UF-P250UF: Tin-plated copper clad steel P0UF-P900UF: Tin-plated copper Solderability per MIL-STD-202, Method 208E Cured, flame retardant epoxy polymer meets UL94V-0 requirements. Marked with the letter P, voltage, amperage rating, and lot number. WAVE SOLDERING INFORMATIONS Pre-Heating Zone Refer to the condition recommended by the flux manufacturer. Max. ramping rate should not exceed 4 /Sec. Soldering Zone Max. solder temperature should not exceed 260 Cooling Zone Cooling by natural convection in air. Specifications are subject to change without notice. Page 6 of 10
7 RLD P UF Series Devices TAPE AND REEL SPECIFICATIONS Product availability: RLDP090UF-RLDP900UF Devices taped using EIA468-B/IE286-2 standards. See table below and Figures 1 and 2 for details. Dimension EIA IEC Dimensions Description mark Mark Dim.(mm) Tol.(mm) Carrier tape width W W /+ Hold down tape width: W 4 W 0 11 min. Top distance between tape edges W 6 W 2 3 max. Sprocket hole position W 5 W Sprocket hole diameter* D 0 D /+0.2 Abscissa to plane(straight lead) H H Abscissa to plane(kinked lead) H 0 H Abscissa to top P090UF-P185UF H 1 H max. Abscissa to top P250UF-P900UF 45.0 max. Overall width w/o lead protrusion P090UF-P185UF C max. Overall width w/o lead protrusion P250UF-P900UF 56 max. Overall width w/ lead protrusion P090UF-P185UF C max. Overall width w/ lead protrusion P250UF-P900UF 57 max. Lead protrusion L 1 l 1 max. Protrusion of cut out L L 11 max. Protrusion beyond hold-down tape l 2 l 2 Not specified Sprocket hole pitch:p090uf-p0uf P 0 P Sprocket hole pitch on P0UF-P900UF P 0 P Device pitch:p090uf-p0uf 12.7 Device pitch:p0uf-p900uf 25.4 Pitch tolerance 20 consecutive. +1 Tape thickness t t 0.9 max. Tape thickness with splice P090UF-P250UF t max. Tape thickness with splice P0UF-P900UF t max. Splice sprocket hole alignment Body lateral deviation Δh Δh 0 + Body tape plane deviation Δp Δp Ordinate to adjacent component lead* P 1 P Ordinate to adjacent component lead* Lead spacing:p090uf-p0uf F F Lead spacing:p500uf-p900uf F F Reel width P090UF-P185UF w 2 w 56 max. Reel width P250UF-P900UF w 2 w 63.5 max. Reel diameter a d 370 max. Space between flanges less device* w /+8.25 Arbor hole diameter c f Core diameter* n h 91 max. Box 64/372/372 max. Consecutive missing places None Empty places per reel 0.1%max. Page 7 of 10
8 RLD P UF Series Devices TAPE AND REEL SPECIFICATIONS Figure 1 Figure 2 Page 8 of 10
9 RLD P UF Series Devices PACKAGING INFORMATION Product Description Part I.D. Bag Quantity Reelpack Quantity Ammopack Quantity RLDP090UF RLDP110UF RLDP135UF RLDP160UF RLDP185UF RLDP250UF RLDP0UF RLDP0UF RLDP500UF RLDP600UF RLDP700UF RLDP800UF N/A 1000 RLDP900UF N/A 1000 PART MARKING SYSTEM P V Voltage Rating Polytronics Symbol UF Lead Free Product Family (V) Part Identification Lot Identification Page 9 of 10
10 RLD P UF Series Devices CROSS REFERENCE Cross Reference Polytronics/ EVERFUSE TM Raychem/ PolySwitch Bourns/ Multifuse RLDP090UF / RLDP090UF-S RLDP110UF / RLDP110UF-S RLDP135UF / RLDP135UF-S RLDP160UF / RLDP160UF-S RLDP185UF / RLDP185UF-S RLDP250UF / RLDP250UF-S RLDP0UF / RLDP0UF-S RLDP0UF / RLDP0UF-S RLDP500UF / RLDP500UF-S RLDP600UF / RLDP600UF-S RLDP700UF / RLDP700UF-S RLDP800UF / RLDP800UF-S RLDP900UF / RLDP900UF-S RUEF090 / RUEF090S RUEF110 / RUEF110S RUEF135 / RUEF135S RUEF160 / RUEF160S RUEF185 / RUEF185S RUEF250 / RUEF250S RUEF0K / RUEF0 RUEF0K / RUEF0 RUEF500K / RUEF500 RUEF600K / RUEF600 RUEF700K / RUEF700 RUEF800K / RUEF800 RUEF900K / RUEF900 EVERFUSE is a registered trademark of Polytronics Technology Corp. Multifuse is a registered trademark of Bourns, Inc. PolySwitch is a registered trademark of Raychem Corporation. Specifications are subject to change without notice. MF-R MF-R110 MF-R135 MF-R160 MF-R185 MF-R250 MF-R0 MF-R0 MF-R500 MF-R600 MF-R700 MF-R800 MF-R900 Page 10 of 10
DATA SHEET POSITIVE TEMPERATURE COEFFICIENT AC/DC POWER SUPPLY SMD0603 series
Product specification November 05, 201 V.0 DATA SHEET AC/DC POWER SUPPLY series RoHS compliant & Halogen free 2 Positive Temperature Coefficient (PTC) Data Sheet Description The 0603 series provides miniature
PTS Volt DC surface mount resettable PTC devices. Technical Data Applications. Agency information.
Supersedes August 2014 Pb HALOGEN HF FREE Applications USB Peripherals Disk drives Power tools Rechargeable battery pack protection Plug and play protection for motherboards and peripherals Mobile phones
MF-RM Series - PTC Resettable Fuses
*RoHS COMPLINT & **HLOGN FR Features Radial leaded devices Cured, flame retardant epoxy polymer insulating material meets UL 94V-0 requirements ulk packaging, tape and reel available Resettable circuit
MF-NSMF Series - PTC Resettable Fuses
*RoHS and EC-Q00 COMPLINT Features n Compliant with EC-Q00 Rev-C Stress Test Qualification for Passive Components in utomotive pplications n Compact design to save board space - 06 footprint n Small size
AC Line Rated Ceramic Disc Capacitors Class X1, 760 V AC, Class Y1, 500 V AC
AC Line Rated Ceramic Disc Capacitors Class X1, 760 V AC, Class Y1, 500 V AC FEATURES Complying with IEC 60384-14 4 th edition Can pass 10 kv pulses (10 per polarity) Withstands 85 / 85 / 1000 h test Reduced
MF-NSMF Series - PTC Resettable Fuses
*RoHS COMPLINT & EC PPROVED Features Compliant with EC-Q00 Rev-C Stress Test Qualification for Passive Components in utomotive pplications Compact design to save board space - 06 footprint Small size results
MF-MSMF Series - PTC Resettable Fuses
*RoHS and AE-Q00 OMPLIANT Features ompliant with AE-Q00 Rev-- Stress Test Qualification for Passive omponents 00 % electrically compatible with all previous generations of 8 SMT devices ompatible with
Ceramic PTC Thermistor: PT Series
Sensor Features. RoHS compliant 2. Small size 3. Very fast reaction time 4. Wide range of protection temperatures 5. Stable over a long life 6. Operating temperature range: 0 ~ Ts+25 C (V=Vmax) 7. Agency
MF-MSMF Series - PTC Resettable Fuses
*RoHS OMPLINT & E PPROVED Features ompliant with E-Q00 Rev-- Stress Test Qualification for Passive omponents in utomotive pplications 00 % electrically compatible with all previous generations of 8 SMT
MF-MSMF Series - PTC Resettable Fuses
*RoHS & E OMPLINT Features n ompliant with E-Q00 Rev-- Stress Test Qualification for Passive omponents in utomotive pplications n 00 % electrically compatible with all previous generations of 8 SMT devices
DATA SHEET. Radial series Leaded ceramic multilayer capacitors. BCE Sud Passive Components Oct 16
DATA SEET File under BCE Sud Passive Components, 2003 Oct 16 BCE Sud Passive Components A former part of Philips Components FEATURES Very high capacitance per unit volume Low cost. APPLICATIONS These conformally
FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE & HIGH OHM. RoHS COMPLIANCE ITEM Halogen and Antimony Free
Spec. No.: RHC K HTS 0001 /8 Date: 2017. 1. 10 Specification Title: FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE & HIGH OHM Style:,20 RoHS COMPLIANCE ITEM Halogen and Antimony Free Product specification
AC Line Rated Ceramic Disc Capacitors Class X1, 760 V AC, Class Y1, 500 V AC
AC Line Rated Ceramic Disc Capacitors Class X1, 760 V AC, Class Y1, 500 V AC FEATURES Complying with IEC 60384-14 4 th edition High reliability Vertical (inline) kinked or straight leads Singlelayer AC
Varistor Products Radial Lead Varistors > ZA Series
RoHS Description The ZA Series of transient voltage surge suppressors are radial leaded varistors (MOVs) designed for use in the protection of low and medium-voltage circuits and systems. Typical applications
POE INTERNATIONAL CORPORATION. SPECIFICATION OF MULTI-LAYER RADIAL-LEADED TYPE CAPACITOR Ver: 8 Page: 1
SPECIFICATION OF MULTI-LAYER RADIAL-LEADED TYPE CAPACITOR Ver: 8 Page:. Scope: Its specification applies to Radial Series Ceramic Capacitor. 2.How to order: CODE: U RD2 R 02 K T Rated Voltage Code:U =
Ceramic PTC Thermistor: PPL Series
Features. RoHS compliant 2. Leaded type 3. Voltage rating: 270V ac ~500V ac 4. Resistance range:0~000ω 5. Stable over a long time 6. Operating temperature range: -20 ~ +85 C (V=V max ) -40 ~ +25 C (V=0)
Data sheet FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE ANDULTRAHIGH VOLTAGE. AEC-Q200 qualified. RoHS COMPLIANCE ITEM Halogen and Antimony Free
No.: RZC K HTS 0001 /6 Date: 2017. 4. 21 Data sheet Title: FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE ANDULTRAHIGH VOLTAGE Style: RZC50, 63 AEC-Q200 qualified RoHS COMPLIANCE ITEM Halogen and Antimony
DATA SHEET General Purpose Thick Film Chip Resistor CR Series
Towards Excellence in Quality, Service & Innovation DATA SHEET General Purpose Thick Film Chip Resistor 1% TO 5%, TCR -200 TO +600 SIZE: 01005/0201/0402/0603/0805/1206/1210/2010/2512 RoHs Compliant Jan
TEA10402V15A0 Engineering Specification
TEA10402V15A0 Engineering 1. Scope This specification is applied to electrostatic discharge (ESD) protection. It is designed to protect the high-speed data lines against ESD transients. It has very low
Tantalum Through-Hole Capacitors Molded Radial T370 & T378 Micron MIL-PRF-49137/6 (CX06 Style) Applications
Overview The KEMET T370 and T378 Micron MIL-PRF-49137/6 (CX06 Style) capacitors are available in a variety of case styles and sizes. These capacitors are designed to operate from 55 C to +85 C at full
Data sheet FIXED CHIP RESISTORS; RECTANGULAR TYPE & WIDE TERMINATION. AEC-Q200 qualified. RoHS COMPLIANCE ITEM Halogen and Antimony Free
No.: TWMC K HTS-0001 /4 Date: 2017. 4. 21 Data sheet Title: FIXED CHIP RESISTORS; RECTANGULAR TYPE & WIDE TERMINATION Style: TWMC32, 50, 63 AEC-Q200 qualified RoHS COMPLIANCE ITEM Halogen and Antimony
CPTC Thermistor: PP Series
Features. RoHS compliant 2. Lead type 3. Voltage rating: 270Vac~500Vac 4. Resistance range:0~000ω 5. Stable over a long time 6. Operating temperature range: -20 ~ +85 C (V=Vmax) -40 ~ +25 C (V=0) 7. Agency
SFRV Polymer PTC Thermistor SFRV ROHS
Polymer PTC Thermistor ROHS Features High voltage endurance. Designed for telecom applications. Low parasitic capacitance, flat impedance with frequency. RoHS compliant and UL certificate(file No.:E305346).
Data sheet FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE RMC1/32,1/20,1/16S,1/16,1/10,1/8,1/4,1/2,1. AEC-Q200 qualified (Without RMC1/32)
No.: RMC-K-HTS-0006 /11 Date: 2017. 4. 18 Data sheet Title: Style: RMC1/32,1/20,1/16S,1/16,1/10,1/8,1/4,1/2,1 AEC-Q200 qualified (Without RMC1/32) RoHS COMPLIANCE ITEM Halogen and Antimony Free Note: Stock
DATA SHEET Metal Element Current Sensing Chip Resistor (Jumper) CLS Series
DATA SHEET Metal Element Current Sensing Chip Resistor (Jumper) 5% SIZE: 0805,1206 & 2512 RoHs Compliant January 19, 2017 V.5 DS-ENG-009 Page: 2 of 14 1. SCOPE 1.1 This specification is applicable to lead
High Operating Temperature Radial Leaded Multilayer Ceramic Capacitors for Automotive Applications, 50 V DC, 100 V DC, 200 V DC
High Operating Temperature Radial eaded Multilayer Ceramic Capacitors for Automotive Applications, 5 V DC, 1 V DC, 2 V DC FEATURES AEC-Q2 qualified with PPAP available High reliability MCC insert with
Interference suppression film capacitors MKP 336 1
MKP RADIAL POTTED TYPE PITCH /15/22.5/27.5 mm l b h lt P d t CBA196 Fig.1 Simplified outlines. FEATURES to 27.5 mm lead pitch Supplied loose in box and taped on reel Consists of a low-inductive wound cell
Resistance (R 25) Ω Ω Ω. Tolerance of R 25 M ±20% H ±25% S ±35%
Features 1. RoHS & Halogen-free compliant 2. EIA size 63,85,121 3. Suitable for reflow soldering 4. Suitable for over-current or short circuit protection 5. Agency Recognition: UL&cUL:File No.E138827 TUV:File
C310T-SC 3.6 mm x 10 mm Time-delay, axial lead ceramic tube fuses
Pb HALOGEN HF FREE Applications Primary circuit protection: Power supplies LED and general lighting Consumer electronics Desktop, laptop and notebook Test equipment Agency information curus Recognition
Zinc Oxide Varistors. VE/VF Types for Heavy Duty Applications ( P Series ) FEATURES PARTICULAR CHARACTERISTICS 18 TPC
VE/VF Types for Heavy Duty Applications ( P Series ) FEATURES P Series are especially dedicated to heavy duty applications encountered in the AC power network. Higher surge current and energy ratings provide
Fixed Voltage Q2L Series 3.3x3.3 QFN
RoHS Pb e3 Fixed Voltage Q2L Series are uni-directional SIDACtor devices designed to protect SLICs (Subscriber Line Interface Circuit from damaging overvoltage transients. The series provides single line
Data sheet FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE AND HIGH POWER ANTI SURGE. AEC-Q200 qualified
No.: RPCH-K-HTS-0001 /2 Date: 2017.4.21 Data sheet Title: Style: FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE AND HIGH POWER ANTI SURGE RPCH16,20,32,35 AEC-Q200 qualified RoHS COMPLIANCE ITEM Halogen
Super High AUTO (SHA) Series
PART NO. SFI1206SA240-1R5J 1.1 Technology Data Symbol Value Unit Maximum allowable continuous DC voltage V DC 12 V Breakdown voltage measured Vv 24(±10%) V Maximum clamping voltage V CLAMP < 40 V Maximum
High-ohmic/high-voltage resistors
FEATURES These resistors meet the safety requirements of: UL1676 (range 510 kω to 11 MΩ) EN60065 BS60065 (U.K.) NFC 92-130 (France) VDE 0860 (Germany) High pulse loading capability Small size. APPLICATIONS
AD Scope: Its specification applies to Radial Series Ceramic Capacitor. 2.How to order: CODE
1 1. Scope: Its specification applies to Radial Series Ceramic Capacitor. 2.How to order: CODE U AD10 R 102 K T Rated Voltage CodeT = 25 VDC U = 50 VDC Size Code : refer to the description in 3 Dielectric
Ceramic Disc DC Capacitors Class 2, Low Loss 500 V, 1 kv, 2 kv and 3 kv
Ceramic Disc DC Capacitors Class 2, tangent line D SH FEATURES High reliability Low losses High capacitance in small size Kinked leads Compliant to RoHS directive 2002/95/EC F Capacitors with inside kink
Metallized polyester film capacitors MKT 470
MKT RADIAL POTTED TYPE PITCH 5 mm CBA141 Fig.1 Simplified outlines. FEATURES Low-inductive wound cell of metallized (PETP) film Potted with epoxy resin in a flame-retardant case Radial leads of solder-coated
NTC Thermistors, Accuracy Line
N Thermistors, Accuracy Line FEATURES Accuracy over a wide temperature range High stability over a long life Excellent price/performance ratio APPLICATIONS Temperature sensing and control QUICK REFERENCE
Axial Leaded Multilayer Ceramic Capacitors for Automotive Applications Class 1 and Class 2, 50 V DC, 100 V DC, 200 V DC
Axial Leaded Multilayer Ceramic Capacitors for Automotive Applications Class 1 and Class 2, 50 V DC, 100 V DC, 200 V DC FEATURES AEC-Q200 qualified with PPAP available High reliability MLCC insert with
Solid Tantalum Chip Capacitors TANTAMOUNT, Low Profile, Conformal Coated, Maximum CV
Solid Tantalum Chip Capacitors TANTAMOUNT, Low Profile, Conformal Coated, Maximum CV FEATURES New case size offerings. 2mm height Terminations: Tin (2) standard. Low ESR 8mm, 12mm tape and reel packaging
1W, 1206, Low Resistance Chip Resistor (Lead free / Halogen Free)
1W, 1206, (Lead free / Halogen Free) 1. Scope This specification applies to 1.6mm x 3.2mm size 1W, fixed metal film chip resistors rectangular type for use in electronic equipment. 2. Type Designation
2W, 2816, SL Type Low Resistance Chip Resistor (Lead / Halogen Free)
2W, 2816, SL Type (Lead / Halogen Free) 1. Scope This specification applies to 4.2mm x 7.1mm size 2W, fixed metal foil current sensing resistors used in electronic equipment. 2. Features / Applications
Thyristors 6 Amp Sensitive & Standard SCRs. Sxx06xSx & Sxx06x Series
Sxx06xSx & Sxx06x Series RoHS Description This Sxx06x SCR series is ideal for uni-directional switch applications such as phase control, heating, motor speed controls, converters/rectifiers and capacitive
S P E C I F I C A T I O N S
TO : 2009-09-14 S P E C I F I C A T I O N S PRODUCT : CERAMIC CAPACITOR MODEL : DA (X1,Y1) SERIES Manufacturer Customer WRITTEN CHECKED APPROVED WRITTEN CHECKED APPROVED 9/14 9/14 9/14 / / / DONG IL ELECTRONICS
Radial Leaded Multilayer Ceramic Capacitors For Automotive Applications Class 1 and Class 2, 50 V DC, 100 V DC, 200 V DC
Radial eaded Multilayer Ceramic Capacitors For Automotive Applications Class 1 and Class 2, 50 V DC, 100 V DC, 200 V DC FEATURES AEC-Q200 qualified with PPAP available igh reliability MCC insert with wet
Capacitors for Use in Electronics
Capacitors for Use in Electronics Capacitors 1 Contents General information on Iskra Capacitors for use in electronics Type Construction of capacitors Class Page KFU polyester capacitors (KT) 13 KEU metallized
Radial Leaded Multilayer Ceramic Capacitors For Automotive Applications Class 1 and Class 2, 50 V DC, 100 V DC, 200 V DC
Radial eaded Multilayer Ceramic Capacitors For Automotive Applications Class 1 and Class 2, 50 V DC, 100 V DC, 200 V DC FEATURES AEC-Q200 qualified with PPAP available igh reliability MCC insert with wet
COMMODITY:SURFACE MOUNT CHIP LED LAMP DEVICE NUMBER:HL-HUB35A-TRB
COMMODITY:SURFACE MOUNT CHIP LED LAMP DEVICE NUMBER:HL-HUB35A-TRB SHEET DATE 1 2 3 4 5 6 7 CONTENTS 2002.11.19 1.0 1.0 1.0 1.0 1.0 1.0 1.0 Initial Released TOTAL PAGE 7 Page 1 of 8 ELECTRICAL AND OPTICAL
SS V Subminiature, radial leaded, time-delay fuses
Supersedes August 2013 250 V Subminiature, radial leaded, time-delay fuses Pb HALOGEN HF FREE Product description Radial leaded, time delay with low breaking capacity Designed to IEC60127-3 Sheet 4 Plastic
NTC Thermistors, Radial Leaded, Standard Precision
FEATURES Accuracy over a wide temperature range High stability over a long life Excellent price/performance ratio UL recognized, file E148885 Old part number was 64 /4/6... Component in accordance to RoHS
Produkt Information. Ultra Low Ohm (Metal Strip) Chip Resistor (LR Series) Scope. Features. Applications. Construction
Scope Ultra Low Ohm (Metal Strip) Chip Resistor (LR Series) -This specification applies to all sizes of rectangular-type fixed chip resistors with alloy as mater. Features -High power rating up to 3 Watts
CHIP RESISTOR. Chip Resistors Selection Guide. General Purpose Chip Resistor. Zero Ohm Jumper Resistor. Chip Resistor Array MAX WORKING VOLTAGE
Chip Resistors Selection Guide General Purpose Chip Resistor SIZE/ mm POWER RATING MAX WORKING VOLTAGE TOLERANCE RESISTANCE RANGE 0402 1.00*0.50 0603 1.60*0.80 1/10W 0. 0805 2.00*1.25 1/8W 1 0. 1206 3.10*1.60
High Ohmic/High Voltage Resistors
High Ohmic/High Voltage Resistors A metal glazed film is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive layer, tinned electrolytic copper wires are welded
SIDACtor Protection Thyristors Broadband Optimized TM Protection. TwinChip Series - DO-214. Description
TwinChip Series - DO-214 RoHS Pb e3 Description TwinChip Series DO-214 are very low capacitance SIDACtor thyristors designed to protect broadband equipment such as VoIP, DSL modems and DSLAMs from damaging
NTC Thermistors, Radial Leaded, Standard Precision
QUICK REFERENCE DATA PARAMETER VALUE Resistance value at 5 C. Ω to 47 kω Tolerance on R 5 - value ± %; ± %; ± 5 % B 5/85 - value 88 K to 457 K Tolerance on B 5/85 - value ±.5 % to ± % Maximum dissipation
Resin-Molded, Radial-Lead Solid Tantalum Capacitors
Resin-Molded, Radial-Lead Solid Tantalum Capacitors PERFORMANCE CHARACTERISTICS Operating Temperature: -55 C to +25 C (above 85 C, voltage derating is required) Capacitance Range: 0. μf to 3 μf Capacitance
Surface Mount UV LED. NUVA33 Series PART NUMBERING SYSTEM. WAVELENGTH CODES Code Nominal Wavelength
FEATURES SURFACE MOUNT 3.4mm x 3.4mm x 2.37mm WAVELENGTH 365 ~ 45nm FOR UV CURING, PHOTO CATALYST & SENSOR LIGHTING RoHS COMPLIANT COMPATIBLE WITH REFLOW SOLDERING TAPE AND REEL PACKAGING SPECIFICATIONS
Distributed by: www.jameco.com 1-8-831-4242 The content and copyrights of the attached material are the property of its owner. LBA11 Dual Pole OptoMOS Relay Parameter Ratings Units Blocking Voltage 3 V
SPF SERIES SOLAR FUSES
Vdc - A Specifications Voltage Rating VDC Amperage Rating,,,.,,,,, 0,,,,, Max. Interrupting Rating ka - A - A ka - A - A Time Constant ms Material Body: Melamine Caps: Copper Alloy Approvals UL - Listed
NTC Thermistors, Accuracy Line
FEATURES Accuracy over a wide temperature range High stability over a long life Excellent price/performance ratio Old part number was 2322 640 3/4/6... Component in accordance to RoHS 2002/95/EC and WEEE
High Ohmic/High Voltage Resistors
High Ohmic/High Voltage Resistors VR68 A metal glazed film is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive layer, tinned electrolytic copper wires are welded
List... Package outline... Features Mechanical data... Maximum ratings... Rating and characteristic curves... Pinning information...
List List... Package outline... 1 Features... Mechanical data... Maximum ratings... Rating and characteristic curves... 3 Pinning information... 4 Marking... 4 Tube packing... 4 Suggested thermal profiles
Class 1, 100 V (DC) (flanged types) Miniature ceramic plate capacitors
FEATURES High-frequency circuits Temperature compensating High stability Space saving. APPLICATIONS In a great variety of electronic circuits, e.g. in filters and tuning circuits where high stability and/or
Applications. Capacitance Tolerance G = ±2% J = ±5%
Surface Mount Metallized PPS Film Capacitor LDB, Unencapsulated Stacked Chip, Size 1206 1812, 16 and 50 VDC Overview Polyphenylene sulphide (PPS) film capacitor for surface mounting. Applications Typical
PRCP-MSMF Series - Polymer Resettable Circuit Protectors
*RoHS COMPLINT & EC PPROVE 9 Features Compliant with EC-Q00 Rev-C- Stress Test Qualification for Passive Components in utomotive pplications 00 % electrically compatible with all previous generations of
WW25R ±1%, ±5%, 2W Metal plate low ohm power chip resistors Size 2512 (6432)
WW25R ±1%, ±5%, 2W Metal plate low ohm power chip resistors Size 2512 (6432) Current Sensing Type Automotive AEC Q200 compliant *Contents in this sheet are subject to change without prior notice. Page
52- Inner Taping dimension or 73- Inner Taping dimension ZB- Z version. UL = UL Version YY = Standard
Precision Fusible safety Wirewound Resistors Axial and SMD Version Ceramic core Flame retardant coating UL42 Recognized (file E330640) ORDERING CODE-Example New SAP Part Nr.: CRF 300 J T - 73-50R UL Serie
Teccor brand Thyristors Silicon Controlled Rectifiers
Description New device series offers high static dv/dt and lower turn off (t q ) sensitive SCR with its small die planar construction SCRs junctions are glass-passivated to ensure long term reliability
WW25Q ±1%, ±5%, 1W Metal plate low ohm power chip resistors Size 2512 (6432)
WW25Q ±1%, ±5%, 1W Metal plate low ohm power chip resistors Size 2512 (6432) Current Sensing Type Automotive AEC Q200 compliant *Contents in this sheet are subject to change without prior notice. Page
Automotive Grade AC Line Rated Ceramic Disc Capacitors Class X1, 440 V AC, Class Y2, 300 V AC
Automotive Grade AC Line Rated Ceramic Disc Capacitors Class X1, 440 V AC, Class Y2, 300 V AC FEATURES AEC-Q200 qualified Withstands 85 / 85 / 1000 h test Can pass 3000 temperature cycles (from -55 C to
FEATURES APPLICATIONS DESCRIPTION QUICK REFERENCE DATA. PILKOR components
FEATURES Excellent anti-surge characteristics Stable characteristics to moisture resistance even in high resistance range. Good replacement for ceramic plate resistors. APPLICATIONS Telecommunication Industrial
Specification of V-PORT XXXX-X-V05 Series
1 Scope Specification of V-PORT-0402 -XXXX-X-V05 Series This specification is applied to ESD and EMI protection for I/O port, for example, VGA, US etc. The customer designed part number drawing take precedence
APPROVAL SHEET FOR AL. ELECTROLYTIC CAPACITORS
NO : ED-A5540 TO : APPROVED APPROVAL SHEET FOR AL. ELECTROLYTIC CAPACITORS : BY: Series Description Part No. HV series, PLEASE RETURN US ONE COPY YOUR SIGED SPECIFICATION AFTER YOU APPROVED OF IT. APPROVED
WK25V, WK20V, WK12V, WK08V, WK06V. Thick Film High Voltage Chip Resistors. Size 2512, 2010,1206, 0805, 0603
WK25V, WK20V, WK12V, WK08V, WK06V ±5%, ±2%, ±1%, ±0.5% Thick Film High Voltage Chip Resistors Size 2512, 2010,1206, 0805, 0603 *Contents in this sheet are subject to change without prior notice. Page 1
FrelTec GmbH. Metal Film Resistor
GmbH Mathildenstr. 10A 82319 Starnberg Germany Metal Film Resistor 10/5/2010 1/21 Freltec GmbH www.freltec.com SPECIFICATION Part Number 052 012 * N * J * TB * E * 1 * _ * _ * Type 052 : Metal Film Resistor
Capacitors. Typical electrical characteristics of metallized polyester capacitors KEU. Type KEU Metallized polyester capacitors
Capacitors Type KEU Metallized polyester capacitors As a dielectric high quality polyester film with good electrical properties is used. Electrodes of capacitor are vacuum metallized aluminium. The thickness
Ceramic Disc Capacitors Class 1 and 2, 100 V DC, General Purpose
D Series Ceramic Disc Capacitors D D EATURES Low losses High stability Tangent line SH Tangent line DR High capacitance in small size Kinked (preferred) or straight leads Compliant to RoHS directive 2002/95/EC
ATC 200 A Series BX Ceramic Multilayer Capacitors
200 A Series BX Ceramic Multilayer Capacitors Case A Size Capacitance Range (.055" x.055") 5 pf to 0.01 µf Low ESR/ESL Mid-K Rugged High Reliability Construction Extended VDC Available, the industry leader,
Samples. Symbol Parameter Test Conditions Value Unit RMS on-state current T C = 40 C 1.5 A I T(AV) Average on-state current T C
TCR22-x Series RoHS Description Excellent unidirectional switches for phase control applications such as heating and motor speed controls. Sensitive gate SCRs are easily triggered with microamps of current
CCDSeries FEATURES ORDERING CODE CCD B 101 K H 7 2 (1) (2) (3) (4) (5) (6) (7) (8) (9) Safety Standard Recognized Ceramic Capacitors
CCDSeries Configuration FEATURES Complying with IEC60384-14 4 th Edition Class X1Y1 and Class X1Y2 Dielectric Strength: AC2600V (r.m.s) for X1Y2 and AC4000V (r.m.s) for X1Y1 High Releability Coated With
PRODUCT SPECIFICATIONS
PRODUCT SCIFICATIONS CUSTOMER : CUSTOMER'S REFERENCE : 3/34 3/35 3/36 Series DESCRIPTIONS : SHENGXIN TY : METALLIZED POLYESTER FILM CAPACITOR-BOX series Fig. w T T W H.5max P 20min H S L0.5max Fig Fig2.
3/4W, 2010 Low Resistance Chip Resistor
1. Scope 3/4W, 2010 This specification applies to 2.5mm x 5.0mm size 3/4W, fixed metal film chip resistors rectangular type for use in electronic equipment. 2. Type Designation RL2550 L - Where (1) (2)
GENERAL PURPOSE CAPACITORS
AMERICAN TECHNICAL CERAMICS GENERAL PURPOSE CAPACITORS Low Cost Multilayer Ceramic Capacitors For Surface Mount Applications Manufactured for ATC ISO 9001 REGISTERED COMPANY ATC 001-847, Rev. AA; 5/18
NTC Thermistor:TSM Series
Features. RoHS & Halogen Free (HF) compliant. EIA size: 00, 00, 00, 080. Highly reliable structure. Operating temperature range: -0 ~+. Wide resistance range. Cost effective. Agency recognition: UL / cul
Snubber MMKP 386 AC and pulse double metallized film capacitor
Page 1 of 19 VISHAY BCcomponents Snubber MMKP 386 AC and pulse double metallized film capacitor File under TPD sheet 190, HQN-384-17/110 Page 2 of 19 Pb AC and Pulse Double Metallized polypropylene MMKP
NTC Disc Thermistors ND 03/06/09 NE 03/06/09 NV 06/09 APPLICATIONS TECHNOLOGY PERFORMANCE CHARACTERISTICS OPTIONS STANDARDIZATION
ND 03/06/09 NE 03/06/09 NV 06/09 APPLICATIONS Commodity Product: 2 families ND or NE : general purpose NV : professional Alarm and temperature measurement application Temperature regulation application
Metallized Polyester PCMT 365/366/367 film capacitors
Metallized Polyester PCMT 365/366/367 MKT RADIAL LACQUERED CAPACITORS (Dipped Type) - Orange Pitch 5.0/7.5mm 365 366 367 QUICK REFERENCE DATA acitance range (E12 series) 0.001 to 1.0 acitance tolerance
594D 477 X0 004 R 2 T TYPE CAPACITANCE CAPACITANCE TOLERANCE DC VOLTAGE RATING AT + 85 C
TANTAMOUNT Conformal Coated, PERFORMANCE/ELECTRICAL CHARACTERISTICS Operating Temperature: - 55 C to + 85 C. (To + 125 C with voltage derating.) Capacitance Range: 1.0 µf to 1500 µf Capacitance Tolerance:
Metal Oxide Film Resistors Axial Connections Metal Oxide Film Resistors 1/4W, 5% Components
Metal Oxide Film Resistors Axial Connections Metal Oxide Film Resistors 1/4W, 5% Components High safety standard, high purity ceramic core Excellent non-flame coating Stable performance in diverse environment,
Varistor Products Radial Lead Varistors > ZA Series
RoHS Description The ZA Series of transient voltage surge suppressors are radial leaded varistors (MOVs) designed for use in the protection of low and medium-voltage circuits and systems. Typical applications
Technical Data Sheet. Pb Free. Specification GR101 SSC. Customer. Rev. 02 January 서식번호 : SSC- QP (Rev.0.
Specification GR101 Pb Free Drawn SSC Approval Customer Approval [ Contents ] 1. Description 2. Absolute maximum ratings 3. Electro-Optical characteristics 4. Characteristic diagrams 5. Reliability result
Teccor brand Thyristors 1.5 Amp Sensitive SCRs
Description Excellent unidirectional switches for phase control applications such as heating and motor speed controls. Sensitive gate SCRs are easily triggered with microamps of current as furnished by
Specification C9WT728
Specification C9WT728 SSC CUSTOMER Drawn Approval Approval CONTENTS 1. Description 2. Absolute Maximum Ratings 3. Electro-Optical Characteristics 4. Optical characteristics 5. Reliability Test 6. Color
Cree XLamp XT-E High-Voltage White LEDs
Product family data sheet Cree XLamp XT-E High-Voltage White LEDs CLD-DS43 REV 1B Product Description The Cree XLamp XT-E High Voltage White LED provides the lighting class performance and reliability
Ceramic Disc Capacitors Class 1 and 2, 500 V DC, General Purpose
D Series Ceramic Disc Capacitors D D FEATURES Low losses High stability Tangent line SH Tangent line SH High capacitance in small size Kinked (preferred) or straight leads Compliant to RoHS directive 2002/95/EC
EMI Suppression PCRC 420 film capacitors (RC unit)
MKP RADIAL POTTED CAPACITORS Pitch 15.0/17.5 mm P = 15.0 / 17.5mm QUICK REFERENCE DATA Capacitance value Capacitance tolerance Resistance value Resistance tolerance Rated (AC) voltage 50 to 60 Hz Climatic
MAU200 Series. 1W, High Isolation SIP, Single & Dual Output DC/DC Converters MINMAX. Block Diagram. Key Features
Component Distributors, Inc. ~ www.cdiweb.com ~ sales@cdiweb.com ~ -0--33 W, High Isolation SIP, Single & DC/DC s Key Features Efficiency up to 00 Isolation MTBF >,000,000 Hours Low Cost Input, and Output
1000 to pf (E3 series) Dielectric material K2000 K5000 K14000 Rated DC voltage 100 V 100 V 63 V Tolerance on capacitance ±10% 20/+50% 20/+80%
, Class 2, 63,, V and 1 V (DC) handbook, 4 columns FEATURES General purpose Coupling and decoupling Space saving. APPLICATIONS In electronic circuits where non-linear change of capacitance with temperature
WW12C, WW08C, WW06C, WW04C, WW02C. Low ohm chip resistors ( power ) Size 1206, 0805, 0603, 0402, 0201
WW12C, WW08C, WW06C, WW04C, WW02C ±5%, ±1%, ±0.5% Low ohm chip resistors ( power ) Size 1206, 0805, 0603, 0402, 0201 *Contents in this sheet are subject to change without prior notice. Page 1 of 8 ASC_WWxxC_V05
FEATURES Overload protection without risk of fire wide range of overload currents. APPLICATIONS TV, Monitor, Audio, Video DESCRIPTION
FEATURES Overload protection without risk of fire wide range of overload currents. APPLICATIONS TV, Monitor, Audio, Video DESCRIPTION A homogeneous film of metal alloy is Deposited on a high grade ceramic