Ceramic Disc DC Capacitors Class 2, Low Loss 500 V, 1 kv, 2 kv and 3 kv
|
|
|
- Shanna Farmer
- 5 years ago
- Views:
Transcription
1 Ceramic Disc DC Capacitors Class 2, tangent line D SH FEATURES High reliability Low losses High capacitance in small size Kinked leads Compliant to RoHS directive 2002/95/EC F Capacitors with inside kink lead spacing D APPLICATIONS In electronic circuits where low losses and high capacitance per volume are essential, for example: SMPS HF ballast Snubber and high voltage circuits DESIGN The capacitors consist of a ceramic disc both sides of which are silver-plated. Connection leads are made of tinned copper having a diameter of 0.6 mm or 0.8 mm. tangent line SH The capacitors are supplied with kinked leads and lead spacings of 5 mm or mm and 10 mm. Encapsulation is made of epoxy-resin, flammable resistant in accordance with UL94V-0. CAPACITANCE RANGE pf to 4700 pf RATED DC VOLTAGE MARKING F Capacitors with outside kink lead spacing Marking indicates capacitance value and tolerance in accordance with EIA 198 and voltage marks. EXAMPLES OF MARKING CODE Disc size (D max. ) 6.5 mm: RR = Low loss with T.C. Y5R 101 K 2 kv Disc size (D max. ) mm: BC RR 102 K 3 kv 500 V; 1 kv; 2 kv; 3 kv DIELECTRIC STRENGTH 200 % of rated voltage INSULATION RESISTANCE AT 500 V (DC) MΩ min. TOLERANCE ON CAPACITANCE ± 10 %; ± 20 % DISSIPATION FACTOR 0.2 % max. OPERATING TEMPERATURE RANGE - 30 C to C TEMPERATURE COEFFICIENT Y5R (2C4) - 30 C TO + 85 C: ± 15 % SECTIONAL SPECIFICATIONS IEC , EIA 198 AGING Typical 0.5 % per time decade Note The capacitors meet the essential requirements of IEC and EIA 198. Unless stated otherwise all electrical values apply at an ambient temperature of 25 ± 3 C, at normal atmospheric conditions Document Number: For technical questions, contact: CDC@vishay.com Revision: 26-May-09 1
2 Ceramic Disc DC Capacitors Class 2, 60 Δ C C (%) 0 Dissipation factor (x 10-4 ) khz 10 khz khz 1 MHz T ( C) Typical capacitance change as a function of temperature and frequency khz khz T amb ( C) 10 khz 1 MHz Typical dissipation factor as a function of temperature and frequency Δ C C (%) Aging rate as a function of time ORDERING INFORMATION CLEAR TEXT CODE C TOL. D LEAD SPACING max. S SH (2) 13 TH DIGIT: (pf) (%) T = REEL; U = AMMO; 3 = BULK 16 TH DIGIT: R = RoHS COMPLIANT 500 V F101K20Y5RL6.J F121K20Y5RL6.J F151K20Y5RL6.J F181K20Y5RL6.J F221K20Y5RL6.J F271K20Y5RL6.J F331K20Y5RL6.J F391K25Y5RL6.J F471K25Y5RL6.J5. ± F561K25Y5RL6.J F681K25Y5RL6.J5. F821K29Y5RL6.J5. 0 F102K29Y5RL6.J F122K33Y5RL6.J F152K33Y5RL6.J F182K39Y5RL6.J F222K39Y5RL6.J F272K47Y5RL63J7. t (h) For technical questions, contact: CDC@vishay.com Document Number: Revision: 26-May-09
3 Ceramic Disc DC Capacitors Class 2, HV LDF 0.2 % ORDERING INFORMATION C (pf) TOL. (%) D max. LEAD SPACING S SH (2) CLEAR TEXT CODE 13 TH DIGIT: T = REEL; U = AMMO; 3 = BULK 16 TH DIGIT: R = RoHS COMPLIANT 1kV F101K25Y5RN6.J F121K25Y5RN6.J F151K25Y5RN6.J F181K25Y5RN6.J F221K25Y5RN6.J F271K29Y5RN6.J F331K29Y5RN6.J F391K29Y5RN6.J F471K29Y5RN6.J F561K33Y5RN6.J ± 10 F681K33Y5RN6.J5. F821K39Y5RN6.J5. 0 F102K39Y5RN6.J F122K43Y5RN6.J F152K43Y5RN6.J F182K47Y5RN63J F222K53Y5RN63J F272K53Y5RN63J F332K69Y5RN63J F392K69Y5RN63J F472K75Y5RN83J0. 2kV F101K25Y5RP6.K F121K25Y5RP6.K F151K25Y5RP6.K F181K29Y5RP6.K F221K29Y5RP6.K F271K29Y5RP6.K F331K29Y5RP6.K F391K33Y5RP6.K F471K33Y5RP6.K F561K39Y5RP6.K ± 10 F681K39Y5RP6.K5. F821K43Y5RP6.K F102K43Y5RP6.K F122K47Y5RP63K F152K53Y5RP63K F182K53Y5RP63K F222K69Y5RP63K F272K75Y5RP83K F332K75Y5RP83K F392K75Y5RP83K F472K96Y5RP83K0. Document Number: For technical questions, contact: CDC@vishay.com Revision: 26-May-09 3
4 Ceramic Disc DC Capacitors Class 2, ORDERING INFORMATION C (pf) TOL. (%) D max. LEAD SPACING S SH (2) 3kV F101K33Y5RR6.K F121K33Y5RR6.K F151K33Y5RR6.K F181K33Y5RR6.K F221K33Y5RR6.K F271K33Y5RR6.K F331K33Y5RR6.K F391K39Y5RR6.K F471K39Y5RR6.K7. ± F561K43Y5RR6.K F681K43Y5RR6.K7. F821K53Y5RR63K F102K53Y5RR63K F122K59Y5RR63K F152K59Y5RR63K F182K75Y5RR83K F222K75Y5RR83K F272K84Y5RR83K0. Notes (1) Maximum thickness: 500 V = 3.5 mm; 1 kv = 4.5 mm; 2 kv = 5.0 mm; 3 kv = 6.0 mm. (2) SH = seated height. CLEAR TEXT CODE 13 TH DIGIT: T = REEL; U = AMMO; 3 = BULK 16 TH DIGIT: R = RoHS COMPLIANT PACKAGING PACKAGING TYPE Bulk (long lead L 25.4 mm Tape and reel Ammopack SIZE CODE 20 to 25 LEAD SPACE VOLTAGE (VDC) Note The capacitors are supplied in bulk packaging (cardboard boxes), in tape on reel or in ammopack SPQ 0 29 to to 47 all all 0 53 to to < WV all 0 53 all all 0 BOX DIMENSIONS LxWxH 245 x 120 x x 370 x 60 < x 240 x WV < and x 290 x 50 all x 330 x all all x 290 x 50 For technical questions, contact: CDC@vishay.com Document Number: Revision: 26-May-09
5 Ceramic Disc DC Capacitors Class 2, HV LDF 0.2 % D P 2 P ΔP Δs Δs ΔP Δ h Δ h H 1 W 2 H 0 L W 1 W 0 W A direction of unreeling d P 1 F P 0 D 0 e t 1 detail A t Kinked capacitors on tape, lead spacing 5.0 mm (0.2") or mm (0.3") DIMENSIONS OF TAPE SYMBOL PARAMETER Notes (1) Cumulative pitch error: ± 1 mm/20 pitches (2) Obliquity maximum 3. Feed-hole pitch P 0 = 12.7 DIMENSIONS Feed-hole pitch P 0 = 15.0 D body diameter 11.0 max max. d lead diameter 0.6 ± ± 0.05 P pitch between capacitors 12.7 ± ± 1.0 P 0 feed-hole pitch 12.7 ± 0.3; (1) 15.0 ± 0.3; (1) ΔP plane deviation 1.0 max. 1.0 max. P 1 feed-hole centre to lead centre 3.85 ± 0.7; (2) 3.75 ± 0.7; (2) P 2 feed-hole centre to component centre 6.35 ± 1.3; (2) ± 1.5; (2) F lead spacing / /- 0.4 Δh component alignment 0 ± ± 1.0 W tape width / /- 0.5 W 0 hold-down tape width 5.0 min. 5.0 min. W 1 hole position / /- 0.5 W 2 hold-down tape margin 3.0 max. 3.0 max. H 0 height to seating plane 16.0 ± ± 0.5 H 1 maximum component height e lead end protrusion 1.0 max. 1.0 max. L maximum length of snipped lead D 0 feed-hole diameter 4.0 ± ± 0.2 t total tape thickness 0.9 max. 0.9 max. t 1 maximum thickness of tape and wires 1.5 max. 1.5 max. Document Number: For technical questions, contact: CDC@vishay.com Revision: 26-May-09 5
6 Ceramic Disc DC Capacitors Class 2, REEL AND TAPE DATA IN MILLIMETERS ± 2.0 W 28 ± 1.5 L H Reel with capacitors on tape Ammopack with capacitors on tape DIMENSIONS OF AMMOPACK PARAMETER DISC SIZE (D max. ) UNIT 6.5 mm to 11.0 mm 12.0 mm to 13.5 mm Taping pitch mm L mm W mm H mm For technical questions, contact: CDC@vishay.com Document Number: Revision: 26-May-09
7 Legal Disclaimer Notice Disclaimer All product specifications and data are subject to change without notice. Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify for any damages arising or resulting from such use or sale. Please contact authorized personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 90 Revision: 18-Jul-08 1
Ceramic Disc Capacitors Class 1 and 2, 100 V DC, General Purpose
D Series Ceramic Disc Capacitors D D EATURES Low losses High stability Tangent line SH Tangent line DR High capacitance in small size Kinked (preferred) or straight leads Compliant to RoHS directive 2002/95/EC
Ceramic Disc Capacitors Class 1 and 2, 500 V DC, General Purpose
D Series Ceramic Disc Capacitors D D FEATURES Low losses High stability Tangent line SH Tangent line SH High capacitance in small size Kinked (preferred) or straight leads Compliant to RoHS directive 2002/95/EC
Ceramic Disc Capacitors Class 1, 3 kv DC
S Series Ceramic Disc Capacitors D D FEATURES Low losses High stability Tangent line SH Tangent line SH High capacitance in small size Kinked (preferred) or straight leads Compliant to RoHS directive 2002/095/EC
Ceramic Disc Capacitors Class 2, low loss 500 V, 1 kv, 2 kv and 3 kv
Vishay Bcomponents eramic Disc apacitors MARKING tangent line D F SH apacitors with inside kink lead spacing tangent line Marking indicates capacitance value and tolerance in accordance with EIA 198 and
Metallized Polypropylene Capacitor, Mini-Version (-M) Related Document: CECC
MKP 840.../...-M Metallized Polypropylene Capacitor, Mini-Version (-M) Related Document: CECC 00 0.6 pcm ± 0.4 Dimensions in millimeters MAIN APPLICATIONS High frequency and pulse operations. Deflection
AC Line Rated Ceramic Disc Capacitors Class X1, 760 V AC, Class Y1, 500 V AC
AC Line Rated Ceramic Disc Capacitors Class X1, 760 V AC, Class Y1, 500 V AC FEATURES Complying with IEC 60384-14 4 th edition Can pass 10 kv pulses (10 per polarity) Withstands 85 / 85 / 1000 h test Reduced
AC Line Rated Ceramic Disc Capacitors Class X1, 760 V AC, Class Y1, 500 V AC
AC Line Rated Ceramic Disc Capacitors Class X1, 760 V AC, Class Y1, 500 V AC FEATURES Complying with IEC 60384-14 4 th edition High reliability Vertical (inline) kinked or straight leads Singlelayer AC
Axial Leaded Multilayer Ceramic Capacitors for Automotive Applications Class 1 and Class 2, 50 V DC, 100 V DC, 200 V DC
Axial Leaded Multilayer Ceramic Capacitors for Automotive Applications Class 1 and Class 2, 50 V DC, 100 V DC, 200 V DC FEATURES AEC-Q200 qualified with PPAP available High reliability MLCC insert with
Resin-Molded, Radial-Lead Solid Tantalum Capacitors
Resin-Molded, Radial-Lead Solid Tantalum Capacitors PERFORMANCE CHARACTERISTICS Operating Temperature: -55 C to +25 C (above 85 C, voltage derating is required) Capacitance Range: 0. μf to 3 μf Capacitance
Aluminum Capacitors Radial Miniature, High Voltage
152 RMH Aluminum Capacitors Fig.1 Component outline QUICK REFERENCE DATA DESCRIPTION VALUE Nominal case sizes ( x L in mm) 10 x 12 to 18 x 35 Rated capacitance range, C R 1.0 to 220 µf Tolerance on C R
Metal Film, Cylindrical Resistors
NOT FOR NEW DESIGNS Metal Film, Cylindrical Resistors FEATURES Stable metal film on high quality ceramic Very low TC and tight tolerances Excellent stability at different environmental conditions Pure
Solid Tantalum Chip Capacitors, TANTAMOUNT, Conformal Coated, Maximum CV, Low ESR
Solid Tantalum Chip Capacitors, TANTAMOUNT, Conformal Coated, Maximum CV, Low FEATURES Large capacitance rating range Mounting: Surface mount Lowest for a surface mount tantalum chip capacitor Terminations:
Double Metallized Polypropylene Film Capacitor Radial AC and Pulse Capacitor
End of Life September 018 - Alternative Device: MMKP8 Double Metallized Polypropylene Film Capacitor Radial AC and Pulse Capacitor FEATURES Material categorization: for definitions of compliance please
Aluminum Capacitors Radial Very Low Impedance
6 RVI Aluminum Capacitors FEATURES Polarized aluminum electrolytic capacitors, non-solid electrolyte Radial leads, cylindrical aluminum case with RoHS COMPLIANT pressure relief, insulated with a blue vinyl
AC and Pulse Film/Foil Capacitors Radial Potted Type
KP186 AC and Pulse Film/Foil Capacitors Radial Potted Type FEATURES Material categorization: For definitions of compliance please see www.vishay.com/doc?9991 APPLICATIONS High voltage, very high current
NTC Thermistors, Radial Leaded, Standard Precision
FEATURES Accuracy over a wide temperature range High stability over a long life Excellent price/performance ratio UL recognized, file E148885 Old part number was 64 /4/6... Component in accordance to RoHS
Radial Leaded Multilayer Ceramic Capacitors For Automotive Applications Class 1 and Class 2, 50 V DC, 100 V DC, 200 V DC
Radial eaded Multilayer Ceramic Capacitors For Automotive Applications Class 1 and Class 2, 50 V DC, 100 V DC, 200 V DC FEATURES AEC-Q200 qualified with PPAP available igh reliability MCC insert with wet
NTC Thermistors, Radial Leaded, Standard Precision
QUICK REFERENCE DATA PARAMETER VALUE Resistance value at 5 C. Ω to 47 kω Tolerance on R 5 - value ± %; ± %; ± 5 % B 5/85 - value 88 K to 457 K Tolerance on B 5/85 - value ±.5 % to ± % Maximum dissipation
Metallized Polypropylene Film Capacitor Related Document: IEC
Metallized Polypropylene Film Capacitor Related Document: IEC 6084-6 MKP 84 L Max. Dimensions in millimeters W Max. Marking FEATURES Product is completely lead (Pb)-free Product is RoHS-compliant 0.6 pcm
Resin-Molded, Radial-Lead Solid Tantalum Capacitors
Resin-Molded, Radial-Lead Solid Tantalum Capacitors PERFORMANCE CHARACTERISTICS Operating Temperature: - 55 C to +25 C (above 85 C, voltage derating is required) Capacitance Range: 0. μf to 3 μf Capacitance
Radial Leaded Multilayer Ceramic Capacitors For Automotive Applications Class 1 and Class 2, 50 V DC, 100 V DC, 200 V DC
Radial eaded Multilayer Ceramic Capacitors For Automotive Applications Class 1 and Class 2, 50 V DC, 100 V DC, 200 V DC FEATURES AEC-Q200 qualified with PPAP available igh reliability MCC insert with wet
Aluminum Capacitors Power Long Life Snap-In
0/0 PLL-SI PUL-SI smaller dimensions 0/0 PLL-SI QUICK REFERENCE DATA DESCRIPTION VALUE 0 0 Nominal case sizes (Ø D x L in mm) x to x 0 Rated capacitance range (E series), to 000 µf Tolerance on ± 0 % Rated
Aluminum Capacitors Axial Miniature, Long-Life
8 AML 0 ASM Fig. Component outlines smaller dimensions 8 AML Aluminum Capacitors longer life 8 AHT 0 ATC FEATURES Polarized aluminum electrolytic capacitors, non-solid electrolyte Axial leads, cylindrical
Parameter Test condition Symbol Value Unit Power dissipation P tot 300 1) mw
DZ-V-Series Small Signal Zener Diodes, Dual Features These diodes are available in other case styles and configurations including: the dual diode common anode configuration with type designation AZ, the
Aluminum Capacitors Power Printed Wiring Style
FEATURES Polarized aluminum electrolytic capacitors, non-solid electrolyte Large types, cylindrical aluminum case, insulated Provided with keyed polarity Very long useful life: 000 h at 8 C Low ESR, high
Surface Mount Multilayer Ceramic Chip Capacitor Solutions for High Voltage Applications
Surface Mount Multilayer Ceramic Chip Capacitor Solutions for High Voltage Applications ELECTRICAL SPECIFICATIONS X7R GENERAL SPECIFICATION Note Electrical characteristics at +25 C unless otherwise specified
Double Layer Capacitors
96 DLC Double Layer Capacitors Form A Fig. Component outline Form B FEATURES Polarized capacitor with high charge density, alternative product to rechargeable backup batteries Dielectric: electric double
Carbon Film Resistors, Standard
LCA... STANDARD ELECTRICAL SPECIFICATIONS FEATURES Securely bonded carbon film Good moisture resistance (ΔR max ±.5 % R) Good long term stability (ΔR max ±.5 % R, for h) Lead (Pb)-free solder contacts
Surface Mount Multilayer Ceramic Capacitors for Pulse Current Applications
Surface Mount Multilayer Ceramic Capacitors for Pulse Current Applications ELECTRICAL SPECIFICATIONS Note Electrical characteristics at +25 C unless otherwise specified FEATURES Low electrostrictive ceramic
Metallized Polyester Film Capacitor Related Document: IEC
Metallized Polyester Film Capacitor Related Document: IEC 6084- MKT 8 Dimensions in millimeters Ø d FEATURES Product is completely lead (Pb)-free Product is RoHS compliant 40.0 ±.0 L 40.0 ±.0 Max. d D
RF Power Plate Capacitors for Higher Voltages, Class 1 Ceramic
RF Power Plate Capacitors for Higher Voltages, Class Ceramic FEATURES Low losses High reliability High voltage ratings APPLICATIONS These high quality power plate capacitors are designed for usage in high
RF Power Feed-Through Capacitors with Conductor Rod, Class 1 Ceramic
DB 06030, DB 06040, DB 06060 RF Power Feed-Through Capacitors with Conductor Rod, Class Ceramic FEATURES Small size Geometry minimizes inductance Wide range of capacitance values APPLICATIONS Filtering
Surface Mount Multilayer Ceramic Chip Capacitors for Safety Certified Applications
Surface Mount Multilayer Ceramic Chip Capacitors for Safety Certified Applications FEATURES Approved IEC 60384-14 Specialty: safety certified capacitors Wet build process Reliable Noble Metal Electrode
Surface Mount Multilayer Ceramic Chip Capacitors DSCC Qualified Type 05007
Surface Mount Multilayer Ceramic Chip Capacitors DSCC Qualified Type 05007 FEATURES US defense supply center approved Federal stock control number, Available CAGE CODE 2770A Available Case size 1206 Stable
High Ohmic/High Voltage Metal Glaze Leaded Resistors
High Ohmic/High Voltage FEATURES A metal glazed film is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive layer, tinned electrolytic copper wires are welded to
RF Power Pot Capacitors with Mounting Tags, Class 1 Ceramic
RF Power Pot Capacitors with Mounting Tags, Class Ceramic FEATURES Small size High reliability Wide range of capacitance values APPLICATIONS Induction and dielectric heating Antenna units Filter, bypass,
RF Power Pot Capacitors with Mounting Tags, Class 1 Ceramic
T. 045090, T. 04520, T. 04550 RF Power Pot Capacitors with Mounting Tags, Class Ceramic FEATURES High reliability Multiple terminals Wide range of capacitance values APPLICATIONS Induction and dielectric
Silicon PIN Photodiode
TEMD5080X01 DESCRIPTION 20535 TEMD5080X01 is a PIN photodiode with enhanced blue sensitivity. The miniature surface mount package (SMD) include a chip with 7.7 mm 2 sensitive area, covered by clear epoxy.
Lead (Pb)-free Thick Film, Rectangular, Precision Chip Resistors
FEATURES Low temperature coefficient (25 ppm/k) and tight tolerances (± 0.25 %) Metal glaze on high quality ceramic Protective overglaze Lead (Pb)-free solder contacts on Ni barrier layer Pure tin plating
Hermetically Sealed, Axial-Lead to CECC Specifications
Hermetically Sealed, Axial-Lead CTS1, CTS13, 749DX FEATURES Terminations: Tin/lead (SnPb), 100 % tin (RoHS compliant) Hermetically sealed metal case with plastic film insulation Extended capacitance range
Filter Inductors, High Current, Radial Leaded
Filter Inductors, High Current, Radial Leaded ELECTRICAL SPECIFICATIONS Inductance: Measured at 1.0 V with zero DC current Dielectric: 2500 V RMS between winding and 0.250" [6.35 mm] of insulating covering
RF Power Feed-Through Capacitors with Conductor Rod, Class 1 Ceramic
DB 030088, DB 03000 RF Power Feed-Through Capacitors with Conductor Rod, Class Ceramic FEATURES Small size Geometry minimizes inductance Wide range of capacitance values APPLICATIONS Filtering purposes
Silicon PIN Photodiode
TEMD7000X0 284 DESCRIPTION TEMD7000X0 is a high speed and high sensitive PIN photodiode. It is a miniature surface mount device (SMD) including the chip with a 0.23 mm 2 sensitive area detecting visible
Resin-Coated, Radial-Lead Solid Tantalum Capacitors
Resin-Coated, Radial-Lead Solid Tantalum Capacitors ELECTRICAL CHARACTERISTICS Operating Temperature: -55 C to +85 C: type 489D -55 C to +125 C (above 85 C, voltage derating is required): type 499D FEATURES
DC Film Capacitors MKT Radial Lacquered Type
l 467 w FEATURES Available taped and loose in box RoHS compliant Seating plane (1) h APPLICATIONS Blocking and coupling, bypass and energy reservoir. α (2) l t REFERENCE STANDARDS IEC 60384-2 MARKING C-value;
Long Side Termination Thick Film Chip Resistors
FEATURES Enhanced power rating Long side terminations Protective overglaze Pure tin solder contacts on Ni barrier layer, provides compatibility with lead (Pb)-free and lead containing soldering processes
Aluminum Capacitors FEATURES APPLICATIONS PACKAGING
Aluminum Capacitors QUICK REFERENCE DATA DESCRIPTION VALUE Nominal case size (Ø D x L in mm) 4 x 5.3 to 12.5 x 13.5 Rated capacitance range, 10 μf to 2200 μf Capacitance tolerance ± 20 % Rated voltage
Surface Mount ESD Capability Rectifiers
Surface Mount ESD Capability Rectifiers Top View esmp TM Series MicroSMP Bottom View PRIMARY CHARACTERISTICS I F(AV).0 A V RRM 00 V, 200 V, 400 V, 600 V I FSM 20 A V F at I F =.0 A 0.925 V I R µa T J max.
Silicon PIN Photodiode, RoHS Compliant
Silicon PIN Photodiode, RoHS Compliant DESCRIPTION 948642 is a high sensitive silicon planar photodiode in a standard TO-18 hermetically sealed metal case with a glass lens. A precise alignment of the
Small Signal Fast Switching Diode
Small Signal Fast Switching Diode MECHANICAL DATA Case: SOD- Weight: approx.. mg Packaging codes/options: 8/K per " reel (8 mm tape), K/box 08/K per 7" reel (8 mm tape), K/box FEATURES Silicon epitaxial
Aluminum Capacitors FEATURES APPLICATIONS PACKAGING
Aluminum Capacitors FEATURES Load life: 2000 h at 105 C Extra low impedance, high ripple current Polarized SMD aluminum electrolytic capacitors, non solid electrolyte Material categorization: for definitions
Part Ordering code Type Marking Remarks 1N4148 1N4148-TAP or 1N4148-TR V4148 Ammopack/tape and reel
Small Signal Fast Switching Diodes Features Silicon epitaxial planar diodes Electrically equivalent diodes: e2 N448 - N94 Lead (Pb)-free component Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC
Surface Mount Multilayer Ceramic Chip Capacitors with Integrated Resistor for High Pulse Current Applications
Surface Mount Multilayer Ceramic Chip Capacitors with Integrated Resistor for High Pulse Current Applications FEATURES Integrated resistor on the surface of the Available capacitor Low electrostrictive
Optocoupler, Phototransistor Output, with Base Connection
Vishay Semiconductors Optocoupler, Phototransistor Output, 2842 DESCRIPTION i79004-4 Each optocoupler consists of gallium arsenide infrared LED and a silicon NPN phototransistor. AGENCY APPROVALS Underwriters
Surface Mount Multilayer Ceramic Chip Capacitors Prohibit Surface Arc-Over in High-Voltage Applications
Surface Mount Multilayer Ceramic Chip Capacitors Prohibit Surface Arc-Over in High-Voltage Applications ELECTRICAL SPECIFICATIONS FEATURES For this Worldwide Patented Technology Specialty: high-voltage
Cemented Wirewound Resistors
FEATURES All welded construction Ceramic core Non-flammable cement coating Tinned copper-clad iron leads (for axial parts) High power dissipation in small volume Ideal for pulse application ead (Pb)-free
Surface Mount Multilayer Ceramic Chip Capacitors for Ultra Small Commodity Applications
Surface Mount Multilayer Ceramic Chip Capacitors for Ultra Small Commodity Applications FEATURES High capacitance in unit size High precision dimensional tolerances Suitably used in high-accuracy automatic
Cemented Wirewound Resistors
Cemented Wirewound Resistors STANDARD EECTRICA SPECIFICATIONS MODE POWER RATING P 40 C W POWER RATING P 70 C W IMITING VOTAGE U max. RESISTANCE RANGE () TCR = - 0 ppm/k to - 80 ppm/k FEATURES All welded
Two-Line ESD Protection in SOT-23
Two-Line ESD Protection in 2 3 20456 MARKING (example only) YYY = type code (see table below) XX = date code 1 XX YYY XX 20512 20357 1 FEATURES Two-line ESD-protection device ESD-protection acc. IEC 61000-4-2
Aluminum Electrolytic Capacitors Radial, Enhanced High Temperature, Low Impedance
Aluminum Electrolytic Capacitors Radial, Enhanced High Temperature, Low Impedance 40 RTM lower Z longer life 25 C 50 C 50 RMI 46 RTI Fig. QUICK REFERENCE DATA DESCRIPTION VALUE Nominal case sizes (Ø D
Surface Mount Multilayer Ceramic Chip Capacitors for High Q Commodity Applications
VJ...WBC High Q Dielectric Surface Mount Multilayer Ceramic Chip Capacitors for High Q Commodity Applications ELECTRICAL SPECIFICATIONS Note Electrical characteristics at 25 C, 30 % to 70 % related humidity,
Cemented Wirewound Precision Resistors
FEATURES High power dissipation in small volume Ideal for pulse application TCR ± 100 ppm/k Maximum permissible hot spot temperature is 275 C ead (Pb)-free Tolerance 1 % Compliant to RoHS Directive 2002/95/EC
Lead (Pb)-Free Thick Film, Rectangular High Value Chip Resistor
Lead (Pb)-Free Thick Film, Rectangular High Value Chip Resistor FEATURES High resistance values (up to 470M) Suitable for voltage dividers and hybrids Pure tin plating provides compatibility with lead
AC and Pulse Metallized Polypropylene Film Capacitors MKP Axial Type
Vishay Roederstein AC and Pulse Metallized Polypropylene Film Capacitors FEATURES Supplied loose in box, taped on ammopack or reel available on request l t APPLICATIONS High current and high pulse operations
Solid-Electrolyte TANTALEX Capacitors, Axial-Leaded, Molded Case
Solid-Electrolyte TANTALEX Capacitors, Axial-Leaded, Molded Case PERFORMANCE CHARACTERISTICS Operating Temperature: -55 C to +85 C (to +125 C with voltage derating) Capacitance Tolerance: at 120 Hz, +25
Lead (Pb)-Bearing Thick Film, Rectangular High Value Chip Resistor
Lead (Pb)-Bearing Thick Film, Rectangular High Value Chip Resistor FEATURES High resistance values (up to 470M) Suitable for voltage dividers and hybrids Lead (Pb)-bearing termination plating on Ni barrier
Optocoupler, Phototransistor Output, no Base Connection
Optocoupler, Phototransistor Output, no Base Connection FEATURES A C NC 1 2 3 6 5 4 NC C E Isolation test voltage, 5 V RMS No base terminal connection for improved common mode interface immunity Long term
Small Signal Fast Switching Diode
Small Signal Fast Switching Diode MECHANICAL DATA Case: SOD- Weight: approx.. mg Packaging codes/options: 8/K per " reel (8 mm tape), K/box 08/K per 7" reel (8 mm tape), K/box FEATURES Silicon epitaxial
Aluminum Electrolytic Capacitors Axial Standard
00/0 AS Aluminum Electrolytic Capacitors Axial Standard 04/04 ASH high voltage 00/0 AS smaller dimensions 0 ASM Fig. QUICK REFERENCE DATA DESCRIPTION VALUE Nominal case sizes (Ø D x L in mm) 4.5 x 0 to
Conductive Polymer Aluminum Capacitors SMD (Chip), Low Impedance
Conductive Polymer Aluminum Capacitors SMD (Chip), Low Impedance FEATURES Long useful life: up to 5000 h at 105 C Very low ESR and highest ripple current SMD-version with base plate, lead (Pb) free reflow
Optocoupler, Phototransistor Output, with Base Connection
Vishay Semiconductors Optocoupler, Phototransistor Output, FEATURES A 6 B Isolation test voltage 5300 V RMS Interfaces with common logic families C NC 2 3 V D E 5 4 C E Input-output coupling capacitance
FEATURES. Heatsink. 1 2 Pin 1 Pin 2
Ultralow V F Ultrafast Rectifier, 8 A FRED Pt esmp Series 2 SlimDPAK (TO-252AE) k Heatsink k 2 Pin Pin 2 FEATURES Ultrafast recovery time, extremely low V F and soft recovery For PFC CCM operation Low
Aluminum Electrolytic Capacitors Radial Miniature, Low Impedance
Aluminum Electrolytic Capacitors Radial Miniature, Low Impedance 36 RVI miniaturize FEATURES Very long useful life: 4000 h to 0 000 h at 05 C, high stability, high reliability Very low impedance and low
Small Signal Fast Switching Diode FEATURES PART ORDERING CODE INTERNAL CONSTRUCTION TYPE MARKING REMARKS
Small Signal Fast Switching Diode MARKING (example only) Bar = cathode marking XY = type code X Y 6 MECHANICAL DATA Case: SOD- Weight: approx.. mg Packaging codes/options: 8/K per " reel (8 mm tape), K/box
Lead (Pb)-bearing Thick Film, Rectangular Chip Resistors
D../CRCW... FEATURES High volume product suitable for commercial and special applications Excellent stability (ΔR/R % for 0 h at 70 C) Lead (Pb)-bearing solder contacts on Ni barrier layer Metal glaze
Part Ordering code Marking Remarks 1N4148W-V 1N4148W-V-GS18 or 1N4148W-V-GS08 A2 Tape and Reel
N8W-V Small Signal Fast Switching Diode Features These diodes are also available in other case styles including the DO case with the type designation N8, the e MiniMELF case with the type designation LL8,
Aluminum Capacitors SMD (Chip) Standard. Table 1
085 CS Aluminum Capacitors Fig.1 Component outlines longer 085 CS 139 CLL life QUICK REFERENCE DATA DESCRIPTION VALUE Nominal case sizes (L x W x H in mm) 8.8 x 3.7 x 3.9 and 11.9 x 3.7 x 3.9 Rated capacitance
Trench MOS Barrier Schottky Rectifier for PV Solar Cell Bypass Protection
Trench MOS Barrier Schottky Rectifier for PV Solar Cell Bypass Protection Ultra Low V F = 0.3 V at I F = 5 A TMBS esmp Series FEATURES Trench MOS Schottky technology Very low profile - typical height of.7
Zener Diodes FEATURES APPLICATIONS. MINIMUM ORDER QUANTITY BZX85-series BZX85-series-TR 5000 (52 mm tape on 13" reel) /box
Zener Diodes PRIMARY CHARACTERISTICS PARAMETER VALUE UNIT V Z range nom.. to V Test current I ZT. to 8 ma V Z specification Pulse current Int. construction Single FEATURES Silicon planar power Zener diodes
Small Signal Zener Diodes
Small Signal Zener Diodes PRIMARY CHARACTERISTICS PARAMETER VALUE UNIT V Z range nom. 2.4 to 75 V Test current I ZT 2.5; 5 ma V Z specification Pulse current Int. construction Single FEATURES Saving space
BAV100/101/102/103. Small Signal Switching Diodes, High Voltage. Vishay Semiconductors
Small Signal Switching Diodes, High Voltage BAV/0/02/03 Features Silicon Epitaxial Planar Diodes Lead (Pb)-free component Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC e2 Applications
Electrical Double Layer Energy Storage Capacitors Up to 3 V Operating Voltage
Electrical Double Layer Energy Storage Capacitors Up to 3 V Operating Voltage FEATURES Polarized energy storage capacitor with high capacity and energy density Rated voltage: 3.0 V Available in through-hole
AC and Pulse Double Metallized Polypropylene Film Capacitors MMKP Radial Potted Type
AC and Pulse Double Metallized Polypropylene Film Capacitors MMKP Radial Potted Type FEATURES 7.5 mm to 37.5 mm lead pitch Material categorization: for definitions of compliance please see /doc?99912 APPLICATIONS
Small Signal Fast Switching Diode FEATURES
Small Signal Fast Switching Diode MARKING (example only) Bar = cathode marking XY = type code X Y 6 DESIGN SUPPORT TOOLS click logo to get started FEATURES Silicon epitaxial planar diode Fast switching
DC Film Capacitors MKT Axial Type
MKT181 DC Film Capacitors MKT Axial Type FEATURES Supplied loose in box, taped on ammopack or reel Material categorization: For definitions of compliance please see www.vishay.com/doc?9991 APPLICATIONS
Small Signal Zener Diodes, Dual
Small Signal Zener Diodes, Dual DESIGN SUPPORT TOOLS Models Available PRIMARY CHARACTERISTICS 6 PARAMETER VALUE UNIT range nom.. to V Test current T specification Pulse current Circuit configuration Dual
Standard Metal Film Leaded Resistors
Standard Metal Film Leaded Resistors A homogeneous film of metal alloy is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive layer, tinned connecting leads of
Standard Metal Film Leaded Resistors
Standard Metal Film Leaded Resistors FEATURES Small size (SFR16S: 0204, SFR25 / SFR25H: 0207) Low noise (max. 1.5 μv/v for R > 1 M ) Compatible to both lead (Pb)-free and lead containing soldering processes
Small Signal Fast Switching Diode
Small Signal Fast Switching Diode MECHANICAL DATA Case: SOD- FL Weight: approx. 9. mg Packaging codes/options: 08/K per 7" reel (8 mm tape), 8K/box FEATURES Silicon epitaxial planar diode Fast switching
Polyester Capacitors Filmite E, ORANGE DROP, Radial Lead
Polyester Capacitors Filmite E, ORANGE DROP, Radial ead PERFORMANCE CHARACTERITIC Operating Temperature: - 55 C to + 85 C To + 105 C when working voltage is reduced to 70 % of + 85 C rating; to + 125 C
Zener Diodes FEATURES APPLICATIONS
Zener Diodes SMA (DO-4AC) PRIMARY CHARACTERISTICS PARAMETER VALUE UNIT V Z range nom. 3.3 to 00 V Test current I ZT.7 to 80 ma V BR 5. to 95 V V WM 4.7 to 90 V P PPM 40 W T J max. 50 C V Z specification
Aluminum Electrolytic Capacitors Power Long Life Snap-In
Aluminum Electrolytic Capacitors Power Long Life Snap-In PUL-SI smaller dimensions 0/0 PLL-SI Fig. QUICK REFERENCE DATA DESCRIPTION VALUE 0 0 Nominal case sizes (Ø D x L in mm) x to x 0 Rated capacitance
Aluminum Electrolytic Capacitors Axial High Temperature High Voltage for E.L.B.
Aluminum Electrolytic Capacitors Axial High Temperature High Voltage for E.L.B. 04-043 ASH standard 04/043 AHH-ELB 550 V/4 h Fig. 85 C 04/043 AMH-ELB 550 V/4 h FEATURES Useful life: 0 000 h at 05 C Stable
Aluminum Capacitors SMD (Chip), High Temperature
Not Recommended for New Designs, Use 50 CR Aluminum Capacitors SMD (Chip), High Temperature 50 CL 53 CRV Lead (Pb)-free 40 CLH 5 C high temperature 53 CLV Fig. low 50 CL QUICK REFERENCE DATA DESCRIPTION
Power Resistor for Mounting onto a Heatsink Thick Film Technology
Power Resistor for Mounting onto a Heatsink FEATURES 1 % tolerance available High power rating = 200 W Wide ohmic value range = 0.046 Ωto 1 MΩ Non inductive Easy mounting Low thermal radiation of the case
Platinum SMD Flat Chip Temperature Sensor
Platinum SMD Flat Chip Temperature Sensor FEATURES Standardized characteristics according to IEC 60751 Advanced thin film technology Short reaction times down to t 0.9 2 s (in air) Outstanding stability
Aluminum Electrolytic Capacitors Radial Semi-Professional
Aluminum Electrolytic Capacitors Radial Semi-Professional 03 RLC low leakage current 8 RUS higher CV- values miniaturized 038 RSU ig. longer life RLL QUICK REERENCE DATA DESCRIPTION VALUE Nominal case
Aluminum Electrolytic Capacitors Radial Miniature Long Life
Aluminum Electrolytic Capacitors Radial Miniature Long Life 6 RLL lower CV-values RMH high voltage longer life 6 RVI miniaturized 0 RMI lower miniaturized 8 RUS Fig. QUICK REFERENCE DATA DESCRIPTION VALUE
Automotive Grade AC Line Rated Ceramic Disc Capacitors Class X1, 440 V AC, Class Y2, 300 V AC
Automotive Grade AC Line Rated Ceramic Disc Capacitors Class X1, 440 V AC, Class Y2, 300 V AC FEATURES AEC-Q200 qualified Withstands 85 / 85 / 1000 h test Can pass 3000 temperature cycles (from -55 C to