Varistor Products Radial Lead Varistors > ZA Series
|
|
|
- Gavin O’Connor’
- 5 years ago
- Views:
Transcription
1 RoHS Description The ZA Series of transient voltage surge suppressors are radial leaded varistors (MOVs) designed for use in the protection of low and medium-voltage circuits and systems. Typical applications include motor control, telecom, automotive systems, solenoid, and power supply circuits to protect circuit board components and maintain data integrity. These devices are available in five model sizes: mm, 7mm, mm, 4mm and mm, and feature a wide V DC voltage range of.v to 6V. Agency Approvals Agency Agency File Number See ZA Series Device Ratings and Specifications Table for part number and brand information. Features 3, (+ 36 for selected parts) 689 compliant available:, 7,, 4, and mm range V M(AC)RMS 4V to 460V.V to 6V 8ºC ambient hard-wired or printed circuit board designs form options ZA Series Absolute Maximum Ratings Continuous ZA Series Units Steady State Applied Voltage: AC Voltage Range (V M(AC)RMS ) 4 to 460 V DC Voltage Range (V M(DC) ). to 6 V Transients: TM ) For 8/μ to 60 A Single Pulse nergy Range (Note ) For /0μ TM ) 0. to J Operating Ambient Temperature Range (T A ) - to +8 ºC Storage Temperature Range (T STG ) - to + ºC Temperature Coefficient (a V ) of Clamping Voltage (V C ) at Specified Test Current <0.0 %/ºC V 0 MΩ CAUTION: Stresses above those listed in "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied.
2 ZA Series Ratings & Specifications Part Number Branding Model Size Disc Dia. (mm) Maximum Rating (8 C) Continuous Transient V RMS V DC nergy x 0μs Peak Current 8 x μs Specifications ( C) Maximum Varistor Voltage at Clamping ma Voltage DC Test Current 8 x μs V NOM Typical Capacitance f = MHz V M(AC) V M(DC) W TM I TM Min Max V C I PK C (V) (V) (J) (A) (V) (V) (V) (A) (pf) V8ZA0P PZ V8ZAP P08Z V8ZAP P08Z VZA0P PZ VZAP PZ VZAP PZ V8ZA0P PZ V8ZAP P8Z V8ZAP P8Z V8ZA3P P8Z V8ZAP P8Z V8ZA40P P8Z V NOM.6 37 VZA0P PZ VZAP PZ VZAP PZ VZA3P PZ V4ZAP P4Z V4ZAP P4Z V7ZA0P PZ V7ZAP P7Z V7ZAP P7Z V7ZA4P P7Z V7ZAP P7Z V7ZA60P P7Z V33ZA0P PZ V33ZAP P33Z V33ZAP P33Z V33ZAP P33Z V33ZAP P33Z V33ZA70P P33Z V36ZAP P36Z V36ZA80P P36Z V39ZA0P PZ V39ZAP P39Z V39ZA3P P39Z V39ZA6P P39Z V39ZAP P39Z V47ZA0P PZ V47ZAP P47Z V47ZA3P P47Z V47ZA7P P47Z V47ZAP P47Z
3 ZA Series Ratings & Specifications (Continued...) Part Number Branding Model Size Disc Dia. (mm) Maximum Rating (8 C) Continuous Transient V RMS V DC nergy x 0μs Peak Current 8 x μs Specifications ( C) Maximum Varistor Voltage at Clamping ma Voltage DC Test Current 8 x μs Typical Capacitance f = MHz V M(AC) V M(DC) W TM I TM Min Max V C I PK C (V) (V) (J) (A) (V) (V) (V) (A) (pf) V6ZA0P PZ V6ZAP P6Z V6ZA3P P6Z V6ZA8P P6Z V6ZAP P6Z V68ZA0P PZ V68ZAP P68Z V68ZA3P P68Z V68ZAP P68Z V68ZAP P68Z V8ZA0P PZ V8ZAP P8Z V8ZA4P P8Z V8ZAP P8Z V8ZAP P8Z VZA0P PZ VZA3P PZ VZA4P PZ VZAP PZ VZAP PZ VZA0P PZ VZAP PZ VZA4P PZ VZA6P PZ VZAP PZ VZA0P PZ VZAP PZ VZA4P PZ VZA8P PZ VZAP PZ V80ZA0P PZ V80ZAP P80Z V80ZAP P80Z V80ZAP P80Z V80ZAP P80Z VZA0P PZ VZA0P PZ V40ZA0P PZ V70ZA0P PZ V330ZA0P PZ V360ZA0P PZ V390ZA0P PZ V430ZA0P PZ V470ZA0P PZ V6ZA0P PZ V680ZA0P PZ V7ZA0P PZ V7ZA0P PZ V NOM V NOM ZA Series 3. ma DC test current. 4. Also rated to withstand 4V for minutes. 6. Also rated to withstand 48V for minutes.
4 Phenolic Coating Option -- ZA Series Varistors for Hi-Temperature Operating Conditions: Lead-Free, Halogen-Free & RoHS Compliant Indicator LF 9 PP3 YYWW Phenolic Coated Option Identifier Current nergy and Power Dissipation Ratings Should transients occur in rapid succession, the average power dissipation is the energy (watt-seconds) per pulse times the number of pulses per second. The power so developed must be within the specifications shown on the Device Ratings and Specifications Table for the specific Figure A - Power Derating for poxy Coated device. The operating values of a MOV need to be derated at high temperatures as shown above. Because varistors only dissipate a relatively small amount of average power they are not suitable for repetitive applications that involve substantial amounts of average power dissipation. Figure B - Power Derating for Phenolic Coated PRCNT OF RATD VALU AMBINT TMPRATUR ( o C) PRCNT OF RATD VALU AMBINT TMPRATUR ( o C) Peak Pulse Current Test Waveform PRCNT OF PAK VALU 90 0 T = Rise Time =. x T T = Decay Time xample - For an 8/ μ 8μs = T = Rise Time μs = T = Decay Time O TT T TIM Figure
5 Maximum Clamping Voltage for mm Parts V8ZA0(P) - V68ZA0(P) MAX CLAMPING VOLTAG MODL SIZ mm 8 TO 68V N(DC) RATING 90 V68ZA0(P) V6ZA0(P) 60 V47ZA0(P) V39ZA0(P) 40 V33ZA0(P) V7ZA0(P) 30 VZA0(P) V8ZA0(P) VZA0(P) -3 V8ZA0(P) V360ZA0(P) - V7ZA0(P) Figure 3 Figure 4 V8ZA0(P) - V33ZA0(P) V330ZA0(P) V70ZA0(P) V40ZA0(P) VZA0(P) VZA0(P) V80ZA0(P) VZA0(P) VZA0(P) MAX CLAMPING VOLTAG MODL SIZ mm 8 TO 330V N(DC) RATING VZA0(P) V8ZA0(P) V7ZA0(P) V7ZA0(P) V680ZA0(P) V6ZA0(P) V470ZA0(P) V430ZA0(P) V390ZA0(P) V360ZA0(P) MAX CLAMPING VOLTAG MODL SIZ mm 360 TO 7V N(DC) RATING Figure Maximum Clamping Voltage for 7mm Parts V8ZA(P) - V68ZA(P) V8ZA(P) - V80ZA(P) MODL SIZ 7mm 8 TO 68V N(DC) RATING V68ZA(P) 70 V6ZA(P) 60 V47ZA(P) V39ZA(P) 40 V33ZA(P) V7ZA(P) 30 VZA(P) V8ZA(P) VZA(P) 4,000 3,000, MODL SIZ 7mm 8 TO 80V N(DC) RATING V80ZA(P) VZA(P) VZA(P) VZA3(P) V8ZA(P) V8ZA(P) Figure 6 Figure
6 Maximum Clamping Voltage for mm Parts V8ZA(P) - V68ZA3(P) V8ZA4(P) - V80ZA(P) MODL SIZ mm 8 TO 68V N(DC) RATING V68ZA3(P) 70 V6ZA3(P) 60 V47ZA3(P) V39ZA3(P) 40 V33ZA(P) V7ZA(P) 30 VZA(P) V8ZA(P) VZA(P) V8ZA(P) Figure 8 Figure 9 4,000 3,000, MODL SIZ mm 8 TO 80V N(DC) RATING V80ZA(P) VZA4(P) VZA4(P) VZA4(P) V8ZA4(P) Maximum Clamping Voltage for 4mm Parts V8ZA3(P) - V68ZA(P) V8ZA(P) - V80ZA(P) MODL SIZ 4mm 8 TO 68V N(DC) RATING V68ZA(P) 70 V6ZA8(P) 60 V47ZA7(P) V39ZA6(P) 40 V33ZA(P) V7ZA4(P) 30 VZA3(P) V8ZA3(P) Figure Figure 4,000 3,000, MODL SIZ 4mm 8 TO 80V N(DC) RATING V80ZA(P) VZA8(P) VZA6(P) VZA(P) V8ZA(P)
7 Maximum Clamping Voltage for mm Parts V8ZA(P) - V36ZA80(P) V39ZA(P) - V80ZA(P) MODL SIZ mm 8 TO 36V N(DC) RATING V36ZA(P) V36ZA80(P) V33ZA(P) V33ZA70(P) V7ZA60(P) V7ZA60(P) V4ZA(P) V4ZA(P) V8ZA40P(P) V8ZA40P(P) 0 0 MODL SIZ mm 39 TO 80V M(AC) RATING T A = - o C TO 8 o V80ZA(P) C VZA(P) VZA(P) V68ZA(P) V6ZA(P) V47ZA(P) V39ZA(P) Figure Figure Repetitive Surge Capability for mm Parts V8ZA0(P) VZA0(P) - V68ZA0(P) MODL SIZ mm V8ZA0(P) MODL SIZ mm VZA0(P) - V68ZA0(P) ZA Series ,000,000 Figure 3 Figure 4 V8ZA0(P) - V7ZA0(P) MODL SIZ mm V8ZA0(P) - V7ZA0(P) 6 Figure 0.,000
8 Repetitive Surge Capability for 7mm Parts V8ZA(P) - VZA(P) Repetitive Surge Capability for mm Parts V8ZA(P) - V7ZA(P) MODL SIZ 7mm V8ZA(P) - VZA(P) MODL SIZ mm V8ZA(P) - VZA(P) 0.,000 Figure Figure 8 0.,000 V8ZA(P) - V68ZA(P) V8ZA(P) - V68ZA3(P) MODL SIZ 7mm V8ZA(P) - V68ZA(P) MODL SIZ mm V8ZA(P) - V68ZA3(P) ,000 Figure 6 Figure 9,000 V8ZA(P) - V80ZA(P) V8ZA4(P) - V80ZA(P), MODL SIZ 7mm V8ZA(P) - V80ZA(P),000, MODL SIZ mm V8ZA4(P) - V80ZA(P),000 Figure 7 Figure,000
9 Repetitive Surge Capability for 4mm Parts V8ZA3(P) - V68ZA(P) V8ZA(P) - V80ZA(P) MODL SIZ 4mm 4 V8ZA3(P) - V68ZA(P) 6,000 MODL SIZ 4mm,000 V8ZA(P) - V80ZA(P) ,000 Figure Figure,000 Repetitive Surge Capability for mm Parts V8ZA40(P) - V68ZA(P) VZA(P) - V80ZA(P), MODL SIZ mm V8ZA40(P) - V68ZA(P) 6,000,000,000,000 0 Figure 3 Figure MODL SIZ mm VZA(P) - V80ZA(P),000 ZA Series (at specified current) of more then +/-% could result. This type of shift, which normally results in a decrease of V, may result in the device not meeting the original published specifications, but does not prevent the device from continuing to function, and to provide ample protection.
10 Wave Solder Profile Non Lead free Profile Lead free Profile Maximum Wave 40C Maximum Wave 60C TMPRATUR (ºC) 0 TMPRATUR (ºC) Figure TIM(MINUTS) Figure 6 TIM(MINUTS) Physical Specifications nvironmental Specifications Lead Material Soldering Characteristics Method 8 Operating Ambient Temperature Range Storage Temperature Range Insulating Material Cured, flame retardant epoxy polymer Humidity Aging +/-% typical voltage change Device Labeling and date code Thermal Shock +/-% typical voltage change Solvent Resistance Moisture Sensitivity
11 Product Dimensions (mm) ød A ATRIM SATING PLAN LTRIM.4 (.00) MIN e e øb CRIMPD AND TRIMMD LAD Radial lead types can be supplied with combination preformed crimp and trimmed leads. This option is supplied to the dimensions shown. To order this crimped and trimmed lead style, standard radial type model numbers are changed xample: Standard Model V8ZA3P Order As V8ZC3P For crimped leads without trimming and any varitions to V RMS Voltage Model Min. mm Size 7mm Size mm Size 4mm Size mm Size Max. Min. Max. Min. Max. Min. Max. A All - (0.394) - (0.47) - 6 (0.630) - (0.787) - Min. Max. 6. (.043) ØD All - 7 (0.76) - 9 (0.34) -. (0.49) - 7 (0.669) - 3 (0.906) e (see notes below) e Øb All 4 (0.7) 6 (0.36) 4 (0.7) 6 (0.36) 6. (0.6) 8. (0.33) 6. (0.6) 8. (0.33) Dimension V8ZA- V6ZA V68ZA- VZA VZA- V80ZA VZA- V7ZA V8ZA- V6ZA V68ZA- VZA VZA- V80ZA VZA- V7ZA All 6. (0.6) (note below) 8. (0.33) (note below) (0.039) 3 (0.8) (0.039) 3 (0.8) (0.039) 3 (0.8) (0.039) 3 (0.8) (0.039) 3 (0.8). (0.09) 3. (0.38). (0.09) 3. (0.38). (0.09) 3. (0.38). (0.09) 3. (0.38). (0.09) 3. (0.38) (0.039) 3 (0.8) (0.039) 3 (0.8) (0.039) 3 (0.8) (0.038) 3 (0.8) (0.038) 3 (0.8). (0.09) 3. (0.38) (0.97) - (0.97) - (0.97) - (0.97) - (0.97) -.6 (0.) -.6 (0.) -.6 (0.) -.6 (0.) -.6 (0.) - (0.97) - (0.97) - (0.97) - (0.97) - (0.97) (0.03) A TRIM All -.6 (0.) 0.68 (0.07) 3.0 (0.) (0.03) 0.68 (0.07) 0.76 (0.030) 0.86 (0.034) 0.76 (0.030) - (0.9) - 9. (0.768) (0.034). (0.886) 0.76 (0.030) (0.034) 9.0 (.4) ZA Series L TRIM All.4 (0.09) 4.69 (0.8).4 (0.09) 4.69 (0.8).4 (0.09) 4.69 (0.8).4 (0.09) 4.69 (0.8). V4ZA(P) and V4ZC(P) only supplied with lead spacing of 6.3mm -/+0.mm (0. -/+0.096) Dimension e =.8 min. Does not apply to Tape and Reel parts..4 (0.09) 4.69 (0.8)
12 Tape and Reel Specifications and 7mm Devices, 4 and mm Devices P P P P H SATING PLAN C H SATING PLAN C H0 Db W0 W W H0 Db W0 W W W W DD0 P P0 F t DD0 P P F t P P P P H H H Db W0 W W H Db W0 W W W W DD0 DD0 P F t P P0 F t P0 P P P P H U H U Ho Db W0 W W Ho Db W0 W W W W DD0 DD0 P P0 F t P P0 F t
13 Tape and Reel Specifications SYMBOL DSCRIPTION MODL SIZ mm 7mm mm 4mm mm P Pitch of Component.7 +/ / / / /-.0 P 0.7 +/ / / / /- 0. P 3.8 +/ / / / /- 0.7 P 6.3 +/ / / / /- 0.7 F.0 +/ / / / /-.0 h Component Alignment.0 Max.0 Max.0 Max.0 Max.0 Max W / / / / / -0. W 0.0 +/ / / / /- 0.3 W / / / / / -0. W 0. Max 0. Max 0. Max 0. Max 0. Max H Component Base / / / / / -0.0 H / / / / /- 0. H 9.0 Max 3.0 Max 36.0 Max 40.0 Max 46. Max D / / / / /- 0. t 0.7 +/ / / / /- 0. U 8.0 Max 8.0 Max 8.0 Max 8.0 Max 8.0 Max p Component Alignment 3º Max ZA Series
14 Part Numbering System BAS PART CODS (See Ratings & Specifications tables and notes below) For VARISTOR NOMINAL VOLTAG (V NOM ) (One, Two or Three Digits) V XXX ZA XX SRIS + PACKAGING / LAD STYL DSIGNATOR (See BAS PART CODS notes below) ZA = Bulk Pack / Straight Leads (standard) ZC = Bulk Pack / Crimped and Trimmed Leads ZS = Tape and Reel / Straight Leads ZT = Tape and Reel / Crimped Leads ZU = Tape and Reel / Under-Crimped Leads P OPTION CODS (See notes below) XXXXX See OPTIONS CODS notes below For standard parts, use the BAS PART designator only. and lead space options), use BAS PART + OPTION COD. OPTION COD items are subject to availability and minimum order RLATIV NRGY INDICATOR (One or Two Digits) LAD-FR, HALOGN-FR AND RoHS COMPLIANT INDICATOR Ordering Notes: BAS PART CODS: Series + Packaging / Lead Style Designators: Ordering examples: Straight Lead Bulk Pack (standard) Straight Lead Tape & Reel Crimped Lead Tape & Reel Crimped & Trimmed Lead Bulk Pack Under- Crimp Lead Tape & Reel V8ZA3P V8ZS3P V8ZT3P V8ZC3P V8ZU3P Crimped lead ZA Series varistors are supplied standard in tape and reel, denoted with "ZT." "ZU" style is supplied in tape and reel only. OPTION CODS: X: For -/+ mm (0.394-/ in) lead spacing (available on mm diameter models only), append standard Standard Model V8ZA40P Order As V8ZA40PX X8: Barrier Coated wire is available as an option, consisting a top coating of Tin. To order append standard model For crimped leads without trimming and any varitions other than that Standard Model V8ZA40P Order As V8ZA40PX8 Packaging and Quantities: sales representative to discuss non-standard options. Tape & Reel Quantities: Device Size Voltage Quantity Per Reel "S" Reel "T" Reel "U" Reel mm All mm All mm All mm < V mm < V X347: (xample: ). For additional information please refer to the section labeled "Phenolic Coating Option" within this document.
Varistor Products Radial Lead Varistors > ZA Series
RoHS Description The ZA Series of transient voltage surge suppressors are radial leaded varistors (MOVs) designed for use in the protection of low and medium-voltage circuits and systems. Typical applications
Varistor Products Radial Lead Varistors > ZA Series
ZA Varistor Series RoHS Agency Approvals Agency Approval Agency ile Number Description The ZA Series of transient voltage surge suppressors are radial leaded varistors (MOVs) designed for use in the protection
Metal-Oxide Varistors (MOVs) Radial Lead Varistors > ZA Series
ZA Varistor Series RoHS Agency Approvals Agency Agency Approval Agency ile Number Description The ZA Series of transient voltage surge suppressors are radial leaded varistors (MOVs) designed for use in
Varistors to
FEATURES Zinc oxide disc, epoxy coated Straight leads Straight leads with flange (2322 592 and 593 series only) Kinked leads. APPLICATION Suppression of transients. DESCRIPTION The varistors consist of
Zinc Oxide Varistors. VE/VF Types for Heavy Duty Applications ( P Series ) FEATURES PARTICULAR CHARACTERISTICS 18 TPC
VE/VF Types for Heavy Duty Applications ( P Series ) FEATURES P Series are especially dedicated to heavy duty applications encountered in the AC power network. Higher surge current and energy ratings provide
Metal Oxide Varistor:TVM-B Series
Features. RoHS & Halogen Free (HF) compliant. EIA size: 040 ~ 0 3. Operating voltage: 5.5Vdc ~ 85Vdc 4. High surge suppress capability 5. Bidirectional and symmetrical V/I characteristics 6. Multilayer
SIDACtor Protection Thyristors Broadband Optimized TM Protection. TwinChip Series - DO-214. Description
TwinChip Series - DO-214 RoHS Pb e3 Description TwinChip Series DO-214 are very low capacitance SIDACtor thyristors designed to protect broadband equipment such as VoIP, DSL modems and DSLAMs from damaging
CCDSeries FEATURES ORDERING CODE CCD B 101 K H 7 2 (1) (2) (3) (4) (5) (6) (7) (8) (9) Safety Standard Recognized Ceramic Capacitors
CCDSeries Configuration FEATURES Complying with IEC60384-14 4 th Edition Class X1Y1 and Class X1Y2 Dielectric Strength: AC2600V (r.m.s) for X1Y2 and AC4000V (r.m.s) for X1Y1 High Releability Coated With
Fixed Voltage Q2L Series 3.3x3.3 QFN
RoHS Pb e3 Fixed Voltage Q2L Series are uni-directional SIDACtor devices designed to protect SLICs (Subscriber Line Interface Circuit from damaging overvoltage transients. The series provides single line
Interference suppression film capacitors MKP 336 1
MKP RADIAL POTTED TYPE PITCH /15/22.5/27.5 mm l b h lt P d t CBA196 Fig.1 Simplified outlines. FEATURES to 27.5 mm lead pitch Supplied loose in box and taped on reel Consists of a low-inductive wound cell
Metallized polyester film capacitors MKT 470
MKT RADIAL POTTED TYPE PITCH 5 mm CBA141 Fig.1 Simplified outlines. FEATURES Low-inductive wound cell of metallized (PETP) film Potted with epoxy resin in a flame-retardant case Radial leads of solder-coated
Thyristors 6 Amp Sensitive & Standard SCRs. Sxx06xSx & Sxx06x Series
Sxx06xSx & Sxx06x Series RoHS Description This Sxx06x SCR series is ideal for uni-directional switch applications such as phase control, heating, motor speed controls, converters/rectifiers and capacitive
Metallized Polyester PCMT 369 film capacitors
MKT RADIAL LACQUERED CAPACITORS (Dipped Type) Pitch 10.0/15.0/22.5/27.5 mm (reduced pitch ; 7.5mm) QUICK REFERENCE DATA Capacitance range (E12 series) Capacitance tolerance Rated voltage V Rdc Climatic
WW12C, WW08C, WW06C, WW04C, WW02C. Low ohm chip resistors ( power ) Size 1206, 0805, 0603, 0402, 0201
WW12C, WW08C, WW06C, WW04C, WW02C ±5%, ±1%, ±0.5% Low ohm chip resistors ( power ) Size 1206, 0805, 0603, 0402, 0201 *Contents in this sheet are subject to change without prior notice. Page 1 of 8 ASC_WWxxC_V05
POE INTERNATIONAL CORPORATION. SPECIFICATION OF MULTI-LAYER RADIAL-LEADED TYPE CAPACITOR Ver: 8 Page: 1
SPECIFICATION OF MULTI-LAYER RADIAL-LEADED TYPE CAPACITOR Ver: 8 Page:. Scope: Its specification applies to Radial Series Ceramic Capacitor. 2.How to order: CODE: U RD2 R 02 K T Rated Voltage Code:U =
The ESD5451R is available in DFP1006-2L package. Standard products are Pb-free and Halogen-free. Circuit diagram
ESD5451R 1-Line, Bi-directional, Transient Voltage Suppressors http//:www.sh-willsemi.com Descriptions The ESD5451R is a bi-directional TVS (Transient Voltage Suppressor). It is specifically designed to
Disc Ceramic Capacitors
Professional Ceramic Capacitors - Class I, II and III I-STD-202F The professional ceramic disc capacitors were specially developed for applications in severe environmental conditions, high humidity, temperature,
RoHS compliant & Halogen Free
Product Specification DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CHIP VARISTORS S0402/0603 5.5 V TO 38 V RoHS compliant & Halogen Free 2 SCOPE This specification describes chip varistors with lead-free
Plastic Film Capacitors. Metallized Polypropylene Film Capacitor E C W F D E C W F D
Metallized Polypropylene Film Capacitor Type : ECWFD Non-inductive construction using metalized Polypropylene film with flame retardant epoxy resin coating. Features Small size Excellent frequency characteristics
DATA SHEET THYRISTOR SURGE SUPPRESSORS MODEMS/LINE CARD PXXXXSX series
Product specification November 06, 201 V.0 DATA SHEET MODEMS/LINE CARD series RoHS compliant & Halogen free 2 Thyristor Surge Suppressors (TSS) Data Sheet Description DO-214AA Thyristor solid state protection
High Precision Thick Film chip resistors. Size 1206, 0805, 0603, 0402, 0201
WK2K, WK08K, WK06K, WK04K, WK02K ±.0%, ±0.5% Thick Film TC50/TC00 High Precision Thick Film chip resistors Size 206, 0805, 0603, 0402, 020 Page of 7 ASC_WKxxK_V07 NOV- 205 FEATURE. SMD Thick film resistor
Samples. Symbol Parameter Test Conditions Value Unit RMS on-state current T C = 40 C 1.5 A I T(AV) Average on-state current T C
TCR22-x Series RoHS Description Excellent unidirectional switches for phase control applications such as heating and motor speed controls. Sensitive gate SCRs are easily triggered with microamps of current
1W, 1206, Low Resistance Chip Resistor (Lead free / Halogen Free)
1W, 1206, (Lead free / Halogen Free) 1. Scope This specification applies to 1.6mm x 3.2mm size 1W, fixed metal film chip resistors rectangular type for use in electronic equipment. 2. Type Designation
Teccor brand Thyristors 0.8 Amp Sensitive SCRs
Description Excellent unidirectional switches for phase control applications such as heating and motor speed controls. Sensitive gate SCRs are easily triggered with microamps of current as furnished by
CERAMIC CHIP CAPACITORS
Example below indicates : SNPO series, 470 pf, 5%, 50 Volt, Tape/Reel packed, 0805 case size. (EXAMPLE) S N P O 4 7 1 J 0 5 0 T 2 Series Series Code: SNPO, SX7R, SZ5U, SY5V. Note: SNPO indicates COG(NPO)
Metallized Polyester PCMT 365/366/367 film capacitors
Metallized Polyester PCMT 365/366/367 MKT RADIAL LACQUERED CAPACITORS (Dipped Type) - Orange Pitch 5.0/7.5mm 365 366 367 QUICK REFERENCE DATA acitance range (E12 series) 0.001 to 1.0μF acitance tolerance,
Ceramic PTC Thermistor: PT Series
Sensor Features. RoHS compliant 2. Small size 3. Very fast reaction time 4. Wide range of protection temperatures 5. Stable over a long life 6. Operating temperature range: 0 ~ Ts+25 C (V=Vmax) 7. Agency
WW12E, WW08E, WW06E ±5%, ±1% Thick film low ohm chip resistors Size 1206, 0805, 0603 RoHS Exemption free and Halogen free
WW12E, WW08E, WW06E ±5%, ±1% Thick film low ohm chip resistors Size 1206, 0805, 0603 RoHS Exemption free and Halogen free *Contents in this sheet are subject to change without prior notice. Page 1 of 7
Varistor Voltage. D: Disk, S: Square S:Straight, C:Crimped, I:Inner, Y:Y kink Size(mm) B: Bulk (Standard lead 20mm min.)
FEATURES * Wide operating voltages ranging from 5Vrms to 1000Vrms (6Vdc to 1465Vdc). * Fast response time of less than 25nS, instantly clamping the transient over voltage. * igh surge current handling
07D 05D min max max
SVR (b)taping Specification: SUCCESS Straight Leads Crimped Leads P2 P H0 H B I P2 P h h W0 W W0 W H W2 W1 W2 W1 I Do P1 P0 F Do P1 P0 F t t Symbol Parameter P Pitch of Component P0 Feed Hole Pitch P1
DATA SHEET ARRAY CHIP RESISTORS YC/TC 164 (8Pin/4R; Pb Free) 5%, 1% sizes
DATA SHEET ARRAY CHIP RESISTORS 164 (Pin/4R; Pb Free) 5%, 1% sizes 4 0603 Supersedes Date of Mar. 06, 2003 2 SCOPE This specification describes YC164 (convex) and TC164 (concave) series chip resistor arrays
Class 1, 100 V (DC) (flanged types) Miniature ceramic plate capacitors
FEATURES High-frequency circuits Temperature compensating High stability Space saving. APPLICATIONS In a great variety of electronic circuits, e.g. in filters and tuning circuits where high stability and/or
30 to 35 ma G. Samples. Symbol Parameter Test Conditions Value Unit RMS on-state current T C = 80 C 20 A I T(AV)
Sxx20x & Sxx25x Series RoHS Description Excellent unidirectional switches for phase control applications such as heating and motor speed controls. Standard phase control SCRs are triggered with few milliamperes
NPN/PNP low V CEsat Breakthrough in Small Signal (BISS) transistor pair in a SOT457 (SC-74) Surface Mounted Device (SMD) plastic package.
Rev. 03 11 December 2009 Product data sheet 1. Product profile 1.1 General description NPN/PNP low V CEsat Breakthrough in Small Signal (BISS) transistor pair in a SOT457 (SC-74) Surface Mounted Device
Teccor brand Thyristors 1.5 Amp Sensitive SCRs
Description Excellent unidirectional switches for phase control applications such as heating and motor speed controls. Sensitive gate SCRs are easily triggered with microamps of current as furnished by
NPN/PNP low V CEsat Breakthrough in Small Signal (BISS) transistor pair in a SOT457 (SC-74) Surface Mounted Device (SMD) plastic package.
Rev. 02 14 July 2005 Product data sheet 1. Product profile 1.1 General description NPN/PNP low V CEsat Breakthrough in Small Signal (BISS) transistor pair in a SOT457 (SC-74) Surface Mounted Device (SMD)
EVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet High Power LED 0.5W (Preliminary) Features Feature of the device: small package with high efficiency Typical view angle: 120 Typical color temperature: 3500 K. ESD protection. Soldering
Dual High-Voltage Trench MOS Barrier Schottky Rectifier
Dual High-Voltage Trench MOS Barrier Schottky Rectifier Ultra Low V F = 0.53 V at I F = 5.0 A 2 TMBS esmp Series Top View PIN PIN 2 PRIMARY CHARACTERISTICS K Bottom View I F(AV) 2 x A V RRM 0 V I FSM 50
Funkentstör-Kondensatoren der Klasse X2
STÖRSCHUTZ-KONDENSATOREN Funkentstör-Kondensatoren der Klasse X2 TECHNICAL TERMS EXPLANATION Rated capacitance Capacitance referred to 1 khz, 20 +-1ºC, 65+-2% of relative humidity and 96+- 10 kpa. In case
Approval sheet WF10A. 1%, 5% Ultra High Power Chip Resistors Size 1210, 3/4W. *Contents in this sheet are subject to change without prior notice.
WF10A 1%, 5% Ultra High Power Chip Resistors Size 1210, 3/4W *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WF10A_V02 MAY - 2016 FEATURE 1. High reliability and stability
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, X5R
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, 6.3 V TO 50 V 10 nf to 100 µf RoHS compliant Product Specification Product specification 2 Surface-Mount
Specification of V-PORT XXXX-X-V05 Series
1 Scope Specification of V-PORT-0402 -XXXX-X-V05 Series This specification is applied to ESD and EMI protection for I/O port, for example, VGA, US etc. The customer designed part number drawing take precedence
Capacitance Cap. Tol. Suffix construction. Rated voltage 450 VDC
Metallized Polypropylene Film Capacitors Type:ECWFD Plastic Film Capacitors Non-inductive construction using metalized Polypropylene film with flame retardant epoxy resin coating. Features Small size Excellent
Qxx15xx & Qxx16xHx Series
Teccor brand Thyristors Description 15 mp and 16 mp bi-directional solid state switch series is designed for C switching and phase control applications such as motor speed and temperature modulation controls,
WK25V, WK20V, WK12V, WK08V, WK06V. Thick Film High Voltage Chip Resistors. Size 2512, 2010,1206, 0805, 0603
WK25V, WK20V, WK12V, WK08V, WK06V ±5%, ±2%, ±1%, ±0.5% Thick Film High Voltage Chip Resistors Size 2512, 2010,1206, 0805, 0603 *Contents in this sheet are subject to change without prior notice. Page 1
WW25R ±1%, ±5%, 2W Metal plate low ohm power chip resistors Size 2512 (6432)
WW25R ±1%, ±5%, 2W Metal plate low ohm power chip resistors Size 2512 (6432) Current Sensing Type Automotive AEC Q200 compliant *Contents in this sheet are subject to change without prior notice. Page
EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet High Power LED 1W (Preliminary)
Features Feature of the device: small package with high efficiency Typical color temperature: 3500 K. Typical view angle: 120. Typical light flux output: 33 lm @ 350mA ESD protection. Soldering methods:
WW25Q ±1%, ±5%, 1W Metal plate low ohm power chip resistors Size 2512 (6432)
WW25Q ±1%, ±5%, 1W Metal plate low ohm power chip resistors Size 2512 (6432) Current Sensing Type Automotive AEC Q200 compliant *Contents in this sheet are subject to change without prior notice. Page
EMI Suppression PCRC 420 film capacitors (RC unit)
MKP RADIAL POTTED CAPACITORS Pitch 15.0/17.5 mm P = 15.0 / 17.5mm QUICK REFERENCE DATA Capacitance value Capacitance tolerance Resistance value Resistance tolerance Rated (AC) voltage 50 to 60 Hz Climatic
ZNR Surge Absorbers (Type SMD)
ZNR Surge Absorbers SMD Type: Series: VF Features Large withstanding surge current capability, in compact size Designed for fl ow/refl ow solderings Low clamping voltage RoHS compliant Recommended Applications
WF12H, WF08H, WF06H, WF04H ±0.5%, ±0.1% Thick film high precision chip resistors Size 1206, 0805, 0603, 0402
WF12H, WF08H, WF06H, WF04H ±0.5%, ±0.1% Thick film high precision chip resistors Size 1206, 0805, 0603, 0402 *Contents in this sheet are subject to change without prior notice. Page 1 of 6 ASC_WFxxH_V02
Metallized Polypropylene Film Capacitor Related Document: IEC
Related Document: IEC 6084-16 MKP 184 Dimensions in millimeters 40.0 ±.0 L 40.0 ±.0 Max. MAIN APPLICATIONS High voltage, high current and high pulse operations, deflection circuits in TV sets (S-correction
3/4W, 2010 Low Resistance Chip Resistor
1. Scope 3/4W, 2010 This specification applies to 2.5mm x 5.0mm size 3/4W, fixed metal film chip resistors rectangular type for use in electronic equipment. 2. Type Designation RL2550 L - Where (1) (2)
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, X5R
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, 6.3 V TO 50 V 10 nf to 100 µf RoHS compliant Product Specification Product specification 2 Surface-Mount
NTC Disc Thermistors ND 03/06/09 NE 03/06/09 NV 06/09 APPLICATIONS TECHNOLOGY PERFORMANCE CHARACTERISTICS OPTIONS STANDARDIZATION
ND 03/06/09 NE 03/06/09 NV 06/09 APPLICATIONS Commodity Product: 2 families ND or NE : general purpose NV : professional Alarm and temperature measurement application Temperature regulation application
Multi-layer ceramic chip capacitors
Multi-layer ceramic chip capacitors (15 (42) size, chip capacitor)!features 1) Small size (1. x.5 x.5 mm) makes it perfect for lightweight portable devices. 2) Comes packed either in tape to enable automatic
All part numbers in the coding below start with "TC-" and end with "203"
1. Scope: This specification for approval relates to 2. Type designation: The type designation shall be in the following form : All part numbers in the coding below start with "TC-" and end with "203"
150 V, 2 A NPN high-voltage low V CEsat (BISS) transistor
Rev. 0 November 2009 Product data sheet. Product profile. General description NPN high-voltage low V CEsat Breakthrough In Small Signal (BISS) transistor in a medium power SOT223 (SC-73) Surface-Mounted
Metallized Polyester PCMT 365/366/367 film capacitors
Metallized Polyester PCMT 365/366/367 MKT RADIAL LACQUERED CAPACITORS (Dipped Type) - Orange Pitch 5.0/7.5mm 365 366 367 QUICK REFERENCE DATA acitance range (E12 series) 0.001 to 1.0 acitance tolerance
DATA SHEET LOW OHMIC HIGH POWER CHIP RESISTORS RL-High power series (Pb Free) 5%, 1% sizes 0805/1206. Product specification May 30, 2005 V.
DATA SHEET LOW OHMIC HIGH POWER CHIP RESISTORS RL-High power series (Pb Free) 5%, 1% sizes 0805/1206 2 SCOPE This specification describes RL0805/1206 low ohmic high power chip resistors with lead-free
List... Package outline... Features Mechanical data... Maximum ratings... Rating and characteristic curves... Pinning information...
List List... Package outline... 1 Features... Mechanical data... Maximum ratings... Rating and characteristic curves... 3 Pinning information... 4 Marking... 4 Tube packing... 4 Suggested thermal profiles
MAYLOON ELECTRONIC CO., LTD.,
FEATURE Silicon epitaxial planar diode () Surface mount pattern, available in various dimension included 0805 & 0603 (, 0805 0603,) Lead free and RoHS compliance components. (RoHS Fast AC switching input
1000 to pf (E3 series) Dielectric material K2000 K5000 K14000 Rated DC voltage 100 V 100 V 63 V Tolerance on capacitance ±10% 20/+50% 20/+80%
, Class 2, 63,, V and 1 V (DC) handbook, 4 columns FEATURES General purpose Coupling and decoupling Space saving. APPLICATIONS In electronic circuits where non-linear change of capacitance with temperature
Great withstanding surge current ( 2000A/cm ) No follow-on current Long life. (V) Nominal Varistor Voltage. Tolerance 820= = =10 10
Zinc Oxide Varistor are non-linear resistors utilizing semiconductor electronic ceramic element mainly composed of zinc oxide and its non-linear resistance change as a function of the applied voltage.it
Double-Sided Chip Resistors
Double-Sided Two parallel resistance elements in a single chip Excellent pulse withstand performance Laser trimmed up to 0.5% tolerance Enhanced working voltage Enhanced power rating Pb-free terminations
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS Mid-voltage NP0/X7R
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS Mid-voltage NP0/X7R 100 V TO 630 V 0.47 pf to 470 nf RoHS compliant & Halogen Free Product Specification Product specification 2 SCOPE This specification
50 TZV 1500 M JDE VB 18X21.5
EXTENDED BASE FEATURES: VB- VIBRATION BASE AEC-Q200 SURFACE MOUNT ROHS COMPLIANT APPLICATIONS: AUTOMOTIVE POWER INDUSTRIAL SPEC: VALUE: MPN :50 TZV 1500 M JDE VB 18X21.5 VDC 50 CAPACITANCE 1500μF +/- 20%
Teccor brand Thyristors 0.8 Amp Sensitive SCRs
EC103xx & SxSx Series RoHS Description Excellent unidirectional switches for phase control applications such as heating and motor speed controls. Sensitive gate SCRs are easily triggered with micromps
Ceramic Disc Capacitors Class 1 and 2, 500 V DC, General Purpose
D Series Ceramic Disc Capacitors D D FEATURES Low losses High stability Tangent line SH Tangent line SH High capacitance in small size Kinked (preferred) or straight leads Compliant to RoHS directive 2002/95/EC
52- Inner Taping dimension or 73- Inner Taping dimension ZB- Z version. UL = UL Version YY = Standard
Precision Fusible safety Wirewound Resistors Axial and SMD Version Ceramic core Flame retardant coating UL42 Recognized (file E330640) ORDERING CODE-Example New SAP Part Nr.: CRF 300 J T - 73-50R UL Serie
DC Film Capacitors MKT Radial Lacquered Type
l 467 w FEATURES Available taped and loose in box RoHS compliant Seating plane (1) h APPLICATIONS Blocking and coupling, bypass and energy reservoir. α (2) l t REFERENCE STANDARDS IEC 60384-2 MARKING C-value;
Metal Oxide Varistor for Automotive:TVM-C Series
Features 1. Qualification based on AEC-Q200 Rev-C 2. High surge suppress capability for automotive application (load dump) 3. No temperature derating up to 125 C 4. Bidirectional and symmetrical V/I characteristics
A I DM. W/ C V GS Gate-to-Source Voltage ± 16. Thermal Resistance Symbol Parameter Typ. Max. Units
V DSS 40 V V GS Max ± 6 V R DS(on) max (@V GS = V) 56 mω G 3 D PD - 96309A HEXFET Power MOSFET R DS(on) max (@V GS = 4.5V) Application(s) Load/ System Switch DC Motor Drive 78 mω S 2 Micro3 TM (SOT-23)
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose Class 1, NP0
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose Class 1, 16 V TO 50 V 0.22 pf to 33 nf RoHS compliant & Halogen Free Product Specification August 05, 2011 V.8 Product specification
NTC Thermistor:TTC05 Series
NTC Thermistor:TTC05 Series Ф5 mm Lead Type for Temperature Sensing/Compensation Features. RoHS compliant 2. Halogen-Free (HF) series are available 3. Body size: Ф5mm 4. Radial lead resin coated 5. Operating
Dual Low-Voltage Trench MOS Barrier Schottky Rectifier
Dual Low-Voltage Trench MOS Barrier Schottky Rectifier Ultra Low V F = 0.3 V at I F = 5.0 A 2 TMBS esmp Series SMPD (TO-263AC) Top View PIN PIN 2 K K Bottom View HEATSINK FEATURES Trench MOS Schottky technology
Tantalum Through-Hole Capacitors Molded Radial T370 & T378 Micron MIL-PRF-49137/6 (CX06 Style) Applications
Overview The KEMET T370 and T378 Micron MIL-PRF-49137/6 (CX06 Style) capacitors are available in a variety of case styles and sizes. These capacitors are designed to operate from 55 C to +85 C at full
Metal Oxide Film Resistors Axial Connections Metal Oxide Film Resistors 1/4W, 5% Components
Metal Oxide Film Resistors Axial Connections Metal Oxide Film Resistors 1/4W, 5% Components High safety standard, high purity ceramic core Excellent non-flame coating Stable performance in diverse environment,
LMBZ52xxBLG Series. 225 mw SOT 23 Surface Mount LESHAN RADIO COMPANY, LTD. 1/6
5 mw SOT Surface Mount This series of Zener diodes is offered in the convenient, surface mount plastic SOT package. These devices are designed to provide voltage regulation with minimum space requirement.
TYPE. max. working voltage 250 V 350 V 500 V 750 V. max. overload voltage 500 V 700 V 1000 V 1500 V. basic specifications IEC B
FEATURES Non inductive High pulse loading capability. APPLICATIONS Application for overload and high voltage surge hazard circuits. DESCRIPTION A carbon film is deposited on a high grade ceramic body.
65 V, 100 ma NPN/PNP general-purpose transistor. Table 1. Product overview Type number Package NPN/NPN PNP/PNP Nexperia JEITA
Rev. 1 17 July 29 Product data sheet 1. Product profile 1.1 General description NPN/PNP general-purpose transistor pair in a very small Surface-Mounted Device (SMD) plastic package. Table 1. Product overview
Pulse Proof, High Power Thick Film Chip Resistors
-HP e3 STANDARD ELTRICAL SPIFICATIONS SIZE RATED LIMITING DISSIPATION ELEMENT MODEL INCH METRIC P 70 VOLTAGE W U max. AC/DC FTURES Excellent pulse load capability Enhanced power rating Double side printed
Symbol Parameter Value Unit RMS on-state current (full sine wave) Qxx35P5 T C. f = 120 Hz T J. 10 μs I GT
Description 30 mp / 35 mp bi-directional solid state switch series is designed for C switching and phase control applications such as motor speed and temperature modulation controls, lighting controls,
Samples. Symbol Parameter Test Conditions Value Unit RMS on-state current T C = 90 C 55 A I T(AV) Average on-state current T C
Sxx55x Series RoHS Description Excellent unidirectional switches for phase control applications such as heating and motor speed controls. Standard phase control SCRs are triggered with few milliamperes
DATA SHEET. Radial series Leaded ceramic multilayer capacitors. BCE Sud Passive Components Oct 16
DATA SEET File under BCE Sud Passive Components, 2003 Oct 16 BCE Sud Passive Components A former part of Philips Components FEATURES Very high capacitance per unit volume Low cost. APPLICATIONS These conformally
Metallized Polypropylene Film Capacitor Related Document: IEC
MKP 184 Metallized Polypropylene Film Capacitor Related Document: IEC 6084-16 MAIN APPLICATIONS: High voltage, high current and high pulse operations, deflection circuits in TV sets (S-correction and fly-back
Resin-Molded, Radial-Lead Solid Tantalum Capacitors
Resin-Molded, Radial-Lead Solid Tantalum Capacitors PERFORMANCE CHARACTERISTICS Operating Temperature: -55 C to +25 C (above 85 C, voltage derating is required) Capacitance Range: 0. μf to 3 μf Capacitance
Data sheet FIXED CHIP RESISTORS; RECTANGULAR TYPE & WIDE TERMINATION. AEC-Q200 qualified. RoHS COMPLIANCE ITEM Halogen and Antimony Free
No.: TWMC K HTS-0001 /4 Date: 2017. 4. 21 Data sheet Title: FIXED CHIP RESISTORS; RECTANGULAR TYPE & WIDE TERMINATION Style: TWMC32, 50, 63 AEC-Q200 qualified RoHS COMPLIANCE ITEM Halogen and Antimony
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, Y5V
Product Specification January 12, 2016 V.6 DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, 6.3 V TO 50 V 10 nf to 47 µf RoHS compliant & Halogen Free
30Vdc Series ELECTRICAL CHARACTERISTICS
RLD P UF Series Devices 2009.10.07 The Radial Leaded devices (RLD Series), a polymer-based Positive Temperature Coefficient (PTC) device to protect electrical circuits against over-current conditions with
Distributed by: www.jameco.com 1-8-831-4242 The content and copyrights of the attached material are the property of its owner. LBA11 Dual Pole OptoMOS Relay Parameter Ratings Units Blocking Voltage 3 V
List... Package outline... Features Mechanical data... Maximum ratings... Rating and characteristic curves... Pinning information...
MBM THRU MBM List List... Package outline... 1 Features... Mechanical data... Maximum ratings... Rating and characteristic curves... 3 Pinning information... 4 Marking... 4 Tube packing... 4 Suggested
Ceramic Disc Capacitors Class 1 and 2, 100 V DC, General Purpose
D Series Ceramic Disc Capacitors D D EATURES Low losses High stability Tangent line SH Tangent line DR High capacitance in small size Kinked (preferred) or straight leads Compliant to RoHS directive 2002/95/EC
Long Side Termination Thick Film Chip Resistors
FEATURES Enhanced power rating Long side terminations Protective overglaze Pure tin solder contacts on Ni barrier layer, provides compatibility with lead (Pb)-free and lead containing soldering processes
4 400 VDC VDC H ±3 % J ±5 % 40 C to +105 C 400 VDC, 630 VDC
Plastic Film Capacitors Metallized Polypropylene Film Capacitor Type: ECWF(L) Designed for high frequency and current applications. Features Small size Excellent frequency characteristics Low loss 8 C,
Commercial Chip - R3L 16Vdc to 5kVdc
Commercial Chip - R3L 16Vdc to 5kVdc A range of commercial MLC chip capacitors in R3L dielectric. This is a Class I temperature compensating N22 dielectric with an energy density that exceeds conventional
200mA, 30V Schottky Barrier Diode
200mA, 30V Schottky Barrier Diode FEATURES Designed for mounting on small surface Low capacitance Low forward voltage drop Compliant to RoHS directive 20/65/EU and in accordance to WEEE 2002/96/EC Halogen-free
DATA SHEET. BYD63 Ripple blocking diode DISCRETE SEMICONDUCTORS Jun 10
DISCRETE SEMICONDUCTORS DATA SHEET book, halfpage M3D9 Supersedes data of November 995 File under Discrete Semiconductors, SC 996 Jun FEATURES Glass passivated High maximum operating temperature Low leakage
FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE & HIGH OHM. RoHS COMPLIANCE ITEM Halogen and Antimony Free
Spec. No.: RHC K HTS 0001 /8 Date: 2017. 1. 10 Specification Title: FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE & HIGH OHM Style:,20 RoHS COMPLIANCE ITEM Halogen and Antimony Free Product specification
Super High AUTO (SHA) Series
PART NO. SFI1206SA240-1R5J 1.1 Technology Data Symbol Value Unit Maximum allowable continuous DC voltage V DC 12 V Breakdown voltage measured Vv 24(±10%) V Maximum clamping voltage V CLAMP < 40 V Maximum