Varistor Products Radial Lead Varistors > ZA Series
|
|
- Emory Rich
- 5 years ago
- Views:
Transcription
1 ZA Varistor Series RoHS Agency Approvals Agency Approval Agency ile Number Description The ZA Series of transient voltage surge suppressors are radial leaded varistors (MOVs) designed for use in the protection of low and medium-voltage circuits and systems. Typical applications include motor control, telecom, automotive systems, solenoid, and power supply circuits to protect circuit board components and maintain data integrity. These devices are available in five model sizes: mm, 7mm, mm, 4mm and 0mm, and feature a wide V D voltage range of.v to 6V. See ZA Series Device Ratings and Specifications Table for part number and brand information. eatures UL449 except parts V8ZAxx and VZAxx -006 I 6- I 6- I 9- (Annex Q) for 4mm (V0 to V80) and 0mm(V0 to V80) only -006 I 6- I 6- I 9- (Annex Q) for 4mm (V0 to V80) and 0mm(V0 to V80) only / Lead free, Halogen- ree and RoHS compliant ide operating voltage range V M(A)RMS 4V to 4V D voltage ratings.v to 6V No derating up to 8º ambient Additional Information model sizes available:, 7,, 4, and 0mm Radial lead package for hard-wired or printed circuit board designs Available in tape and reel or bulk pack Standard lead form options Datasheet Resources Samples Absolute Maximum Ratings or ratings of individual members of a series, see Device Ratings and Specifications chart ontinuous ZA Series Units Steady State Applied Voltage: A Voltage Range (V M(A)RMS ) 4 to 4 V D Voltage Range (V M(D) ). to 6 V Transients: eak ulse urrent (I TM ) or 8/0µs urrent ave (See igure ) to 6 A Single ulse nergy Range (Note ) or /00µs urrent ave ( TM ) 0. to J Operating Ambient Temperature Range (T A ) - to +8 º Storage Temperature Range (T STG ) - to + º Temperature oefficient (a V ) of lamping Voltage (V ) at Specified Test urrent <0.0 %/º Hi-ot ncapsulation (OATING Isolation Voltage apability) (Dielectric must withstand indicated D voltage for one minute per MIL STD 0, Method ) V OATING Insulation Resistance 00 MΩ AUTION: Stresses above those listed in "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress only rating and operation of the device ahese or any other conditions above those indicated in the operational sections of this specification is not implied. 04 Littelfuse, Inc. Specifications are subjeco change without notice. Revised: //4
2 ZA Series Ratings & Specifications art Number Branding Model Size Disc Dia. (mm) Maximum Rating (8 ) ontinuous Transient V RMS V D nergy x 00µs eak urrent 8 x 0µs Specifications ( ) Maximum Varistor Voltage at lamping ma Voltage D Test urrent 8 x 0µs V NOM Typical apacitance f = MHz V M(A) V M(D) TM I TM Min Max V I K (V) (V) (J) (A) (V) (V) (V) (A) (p) V8ZA0 Z V8ZA 08Z V8ZA 08Z VZA0 Z VZA Z VZA Z V8ZA0 Z V8ZA 8Z V8ZA 8Z V8ZA3 8Z V8ZA0 8Z V8ZA 8Z (Note) VZA0 Z VZA Z VZA Z VZA3 Z V4ZA0 4Z V4ZA 4Z (Note 4) 0 (Note ) V NOM V7ZA0 Z V7ZA 7Z V7ZA 7Z V7ZA4 7Z V7ZA0 7Z V7ZA 7Z (Note ) V33ZA0 Z V33ZA 33Z V33ZA 33Z V33ZA 33Z V33ZA0 33Z V33ZA70 33Z (Note ) V36ZA0 36Z V36ZA80 36Z (Note ) V39ZA0 Z V39ZA 39Z V39ZA3 39Z V39ZA6 39Z V39ZA0 39Z V47ZA0 Z V47ZA 47Z V47ZA3 47Z V47ZA7 47Z V47ZA0 47Z (Note 6) 3 (Note 7) Littelfuse, Inc. Specifications are subjeco change without notice. Revised: //4
3 ZA Series Ratings & Specifications (ontinued...) art Number Branding Model Size Disc Dia. (mm) Maximum Rating (8 ) ontinuous Transient V RMS V D nergy x 00µs eak urrent 8 x 0µs Specifications ( ) Maximum Varistor Voltage at lamping ma Voltage D Test urrent 8 x 0µs V NOM Typical apacitance f = MHz V M(A) V M(D) TM I TM Min Max V I K (V) (V) (J) (A) (V) (V) (V) (A) (p) V6ZA0 Z V6ZA 6Z V6ZA3 6Z V6ZA8 6Z V6ZA0 6Z V68ZA0 Z V68ZA 68Z V68ZA3 68Z V68ZA 68Z V68ZA0 68Z V8ZA0 Z V8ZA 8Z V8ZA4 8Z V8ZA 8Z V8ZA0 8Z V0ZA0 Z V0ZA3 0Z V0ZA4 0Z4 8 6 V0ZA 0Z V0ZA0 0Z V0ZA0 Z V0ZA 0Z V0ZA4 0Z V0ZA6 0Z V0ZA0 0Z VZA0 Z VZA Z VZA4 Z VZA8 Z VZA0 Z V80ZA0 Z V80ZA 80Z V80ZA 80Z V80ZA 80Z V80ZA0 80Z V0ZA0 Z V0ZA0 Z VZA0 Z V70ZA0 Z V3ZA0 Z V3ZA0 Z V3ZA0 Z V4ZA0 Z V470ZA0 Z VZA0 Z V680ZA0 Z V7ZA0 Z V7ZA0 Z Note:. Average power dissipation of transients noo exceed 0., 0., 0.4, 0.6 or for model sizes mm, 7mm, mm, 4mm and 0mm, respectively.. nergy rating for impulse duration of ms minimum to one half of peak current (auto Load Dump). 3. ma D test current. V NOM 4. Also rated to withstand 4V for minutes.. Higher voltages available, contact Littelfuse. 6. Also rated to withstand 48V for minutes. 7. nergy rating for impulse duration of ms minimum to one half of peak current (Auto Load Dump): 0J Also Recognized to UL 449, Transient Voltage Surge Suppressors ile 6 04 Littelfuse, Inc. Specifications are subjeco change without notice. Revised: //4
4 henolic oating Option -- ZA Series Varistors for Hi- Temperature Operating onditions: henolic coated ZA Series devices are available with improved maximum operating temperature of These devices also have improved temperature cycling performance capability Ratings and specifications are as per standard ZA Series except Hi ot ncapsulation (Isolation Voltage apability) = V To order: add 'X347' to part number (e.g. VZA3X347) These devices are not UL, SA, VD or certified ontact factory for further details opper lectrode Option: Add '' to the end of the part number (e.g. VZA0) opper electrode option is only available for V~V7 for ZA series. roduct marking: L 9 Lead-ree, Halogen-ree & RoHS ompliant Indicator Z YY opper lectrode Option Identifier roduct marking: L 9 Lead-ree, Halogen-ree & RoHS ompliant Indicator 3 YY henolic oated Option Identifier urrent nergy and ower Dissipation Ratings Should transients occur in rapid succession, the average power dissipation is the energy (watt-seconds) per pulse times the number of pulses per second. The power so developed must be within the specifications shown on the Device Ratings and Specifications Table for the specific igure A - ower Derating for poxy oated device. The operating values of a MOV need to be derated at high temperatures as shown above. Because varistors only dissipate a relatively small amount of average power they are not suitable for repetitive applications that involve substantial amounts of average power dissipation. igure B - ower Derating for henolic oated RNT O RATD VALU AMBINT TMRATUR ( o ) IGUR. URRNT, NRGY AND OR DRATING URV eak ulse urrent Test aveform RNT O RATD VALU AMBINT TMRATUR ( o ) IGUR. URRNT, NRGY AND OR DRATING URV RNT O AK VALU 0 0 = Virtual Origin of ave T = Time from % to % of eak T = Rise Time =. x T T = Decay Time xample - or an 8/0 µs urrent aveform: 8µs = T = Rise Time 0µs = T = Decay Time O TT T TIM igure O 04 Littelfuse, Inc. = Virtual Origin of ave Specifications are subjeco change T = without Time notice. rom % to % of eak Revised: //4 T = Virtual ronime =. t T = Virtual Time to Half Value (Impulse Duration) xample: or an 8/0µs urrent aveform:
5 Maximum lamping Voltage for mm arts V8ZA0() - V68ZA0() IGUR 3. LAMING VOLTAG OR V8ZA0() - V68ZA0() V3ZA0() - V7ZA0() M AK VOLTS (V) 00 0 V68ZA0() V6ZA0() V47ZA0() V39ZA0() V33ZA0() V7ZA0() VZA0() V8ZA0() 0 VZA0() MAX LAMING VOLTAG MODL SIZ mm 8 TO 68V N(D) RATING T A = - o TO 8 o V8ZA0() V7ZA0() V7ZA0() V680ZA0() VZA0() V470ZA0() V4ZA0() V3ZA0() V3ZA0() igure 3 igure 4 igure 0.00 MAX LAMING VOLTAG MODL SIZ mm 3 TO 7V N(D) RATING T A = - o TO 8 o IGUR. LAMING VOLTAG OR V3ZA0() - V7ZA0() Maximum lamping Voltage for 7mm arts 00 MAXIMUM LAMING VOLTAG MODL SIZ 7mm 8 TO 68V N(D) RATING T A = - o TO 8 o V68ZA() 70 V6ZA() V47ZA() V39ZA() V33ZA() V7ZA() VZA() 00 V8ZA() 0 VZA() V8ZA() IGUR 6. LAMING VOLTAG OR V8ZA() - V68ZA() ,000 MAXIMUM LAMING VOLTAG MAXIMUM LAMING VOLTAG 3,000 MODL SIZ 7mm V8ZA() - V68ZA() V8ZA() MODL IGUR - V80ZA() SIZ. mm LAMING VOLTAG OR V3ZA0() - V7ZA0() 8 TO 80V N(D) RATING T A = - o TO 8 o 8 TO 68V N(D) RATING,000 T A = - o TO 8 o G MAXIMUM LAMING VOLTAG 4, MAXIMUM LAMING VOLTAG MODL SIZ 7mm 3,000 MODL SIZ 7mm NG 8 TO 68V N(D) RATING,000 T 0 A = - o TO 8 o 8 TO 80V N(D) RATING 0,000 T A = - o TO 8 o V80ZA() 80 V68ZA3() VZA() 70 V6ZA3() V0ZA() V47ZA3() 0 V0ZA3() V39ZA3(),000 V8ZA() V33ZA() 0 80 V68ZA() 800 V7ZA() 70 V6ZA() 700 V80ZA() VZA() VZA() V47ZA() V8ZA() 00 V0ZA() V39ZA() 0 V33ZA() V0ZA3() V7ZA() VZA() V8ZA() VZA() V8ZA() 0 V8ZA() VZA() V8ZA() 0 00 IGUR 7. LAMING VOLTAG OR V8ZA() - V80ZA() IGUR 8. LAMING VOLTAG OR V8ZA() - V68ZA3() igure 6 igure 7 4,000 - V7ZA0() IGUR MAXIMUM 6. LAMING VOLTAG OR V8ZA() - V68ZA() MAXIMUM IGUR LAMING 7. LAMING VOLTAG VOLTAG OR V8ZA() - V80ZA() 3,000 MODL SIZ mm MODL SIZ 4mm 8 TO 80V N(D) RATING 8 TO 68V N(D) RATING,000 T A = - o TO 8 o T A = - o TO 8 o MAXIMUM LAMING VOLTAG 4,000 MODL SIZ mm MAXIMUM LAMING VOLTAG 8 TO 68V N(D) RATING T 00 A = - o TO 8 o 3,000 MODL SIZ mm 8 TO 80V N(D) RATING, ,000 T A = - o TO 8 o V80ZA() VZA4() V0ZA4() V0ZA4() 0 80 V68ZA3() V8ZA4() 70 V6ZA3() V47ZA3() AXIMUM AK VOLTS (V) V8ZA0() - V33ZA0() AK VOLTS (V) V68ZA(), V6ZA8() 0 V47ZA7() V39ZA6() 0.00 V3ZA0() V70ZA0() VZA0() V0ZA0() V0ZA0() V80ZA0() VZA0() V0ZA0() MAX LAMING VOLTAG MODL SIZ mm 8 TO 3V N(D) RATING T A = - o TO 8 o V0ZA0() V8ZA0() IGUR 4. LAMING VOLTAG OR V8ZA0() - V33ZA0() V7ZA0() V7ZA0() V680ZA0() VZA0() V470ZA0() V4ZA0() V3ZA0() V3ZA0() MAX LAMING VOLTAG MODL SIZ mm 3 TO 7V N(D) RATING T A = - o TO 8 o 04 Littelfuse, Inc. Specifications are subjeco change without notice. Revised: //4 V80ZA() VZA4() V0ZA4() AK VOLTS (V) 00 MAXIMUM L MODL SIZ 7 8 TO 68V N(D) T A = - o TO 0 80 V68ZA() 70 V6ZA() V47ZA() V39ZA() V33ZA() V7ZA() VZA() V8ZA() 0 VZA() V8ZA() -3 - IGUR 6. LAM 00 MAXIMUM L MODL SIZ 8 TO 68V N(D T A = - o TO 0 80 V68ZA3() 70 V6ZA3() V47ZA3() V39ZA3() V33ZA() V7ZA() VZA() V8ZA() 0 VZA() V8ZA() -3 - IGUR 8. LAM 00 0 MAXIMUM MODL SIZ 8 TO 68V N(D T A = - o TO
6 ING VOLTAG mm N(D) RATING O 8 o MAXIMUM MAXIMUM AK VOLTS AK (V) VOLTS ( Varistor 0 T A = - roducts o TO 8 o V68ZA() 70 V6ZA() V47ZA() 0 V39ZA() V33ZA() 80 V7ZA() V68ZA() 70 VZA() V6ZA() V8ZA() V47ZA() 00 0 VZA() V39ZA() V33ZA() V7ZA() VZA() V8ZA() V8ZA() VZA() ) Maximum lamping Voltage AK AMRS for mm (A) arts 3 4 V8ZA() 0ZA0() - V7ZA0() V8ZA() - IGUR V68ZA3() 6. LAMING VOLTAG OR V8ZA() - V68ZA() IGUR 7. LAMING VOLTAG OR V8ZA() - V80ZA() 0 00 V8ZA4() - V80ZA() ) MAXIMUM LAMING VOLTAG 4,000 MODL SIZ mm MAXIMUM LAMING VOLTAG 0ZA0() - V7ZA0() IGUR 6. LAMING VOLTAG OR V8ZA() - V68ZA() 8 TO 68V N(D) RATING 3,000 MODL SIZ mm T A = - o TO 8 o 8 TO 80V N(D) RATING T A = - o TO 8 o 00,000 MAXIMUM LAMING VOLTAG MODL SIZ mm 8 TO 68V N(D) RATING 0 T A = - o TO 8 o, V68ZA3() 800 V80ZA() 70 V6ZA3() 700 VZA4() V47ZA3() V39ZA3() V0ZA4() 0 V33ZA() V0ZA4() V7ZA() V8ZA4() 80 V68ZA3() 70 VZA() V6ZA3() V8ZA() V47ZA3() 0 V39ZA3() 00 VZA() V33ZA() V7ZA() VZA() V8ZA() 3 4 V8ZA() ) VZA() igure 8 igure V8ZA() 8ZA() - V80ZA() IGUR 8. LAMING VOLTAG OR V8ZA() - V68ZA3() IGUR 9. LAMING VOLTAG OR V8ZA4() - V80ZA() ) Maximum lamping Voltage for 4mm arts 8ZA() - V80ZA() IGUR MAXIMUM 8. LAMING LAMING VOLTAG OR V8ZA() - V68ZA3() V8ZA3() - V68ZA() MODL SIZ 4mm V8ZA() - V80ZA() 8 TO 68V N(D) RATING Transient V-I haracteristic urves T A = - o TO 8 o (ontinued) MAXIMUM MAXIMUM AK VOLTS AK (V) VOLTS (V) MAXIMUM MAXIMUM AK VOLTS AK (V) VOLTS (V) 00 MAXIMUM LAMING VOLTAG MODL SIZ 7mm 8 TO 68V N(D) RATING MAXIMUM LAMING VOLTAG MODL SIZ 4mm 8 TO 68V N(D) RATING T A = - o TO 8 o MAXIMUM AK VOLTS, V80ZA() VZA() V0ZA() V0ZA3() V8ZA() MAXIMUM LAMING VOLTAG MODL SIZ 4mm 8 TO 80V N(D) RATING T A = - o TO 8 o V68ZA(), V6ZA8() V47ZA7() 700 V80ZA() V39ZA6() VZA8() 0 V0ZA6() 80 V33ZA() V68ZA() V0ZA() 70 V7ZA4() V6ZA8() V8ZA() VZA3() V47ZA7() V8ZA3() V39ZA6() V33ZA() 00 V7ZA4() ) VZA3() V8ZA3() 0 8ZA4() - V80ZA() IGUR. LAMING VOLTAG OR V8ZA3() - V68ZA() ) igure igure 3 4 IGUR. LAMING VOLTAG OR V8ZA() - V80ZA() 8ZA4() - V80ZA() IGUR. LAMING VOLTAG OR V8ZA3() - V68ZA() 4,000 3,000,000 MAXIMUM AK VOLTS ( 0 80 V68 70 V6 V47 V39 V33 V7 V V8 0 V V8-3 IGUR V68 70 V6 V47 V39 V33 V7 V V8 0-3 IGUR IGUR V, MAXIMUM LAMING VOLTAG MODL SIZ 0mm 39 TO 80V M(A) RATING T A = - o TO 8 o V80ZA VZA V0ZA IGUR 3. LAMING VOLTAG OR V39Z ulse Rating urves 04 Littelfuse, Inc. Specifications are subjeco change without notice. Revised: //4 RRNT (A) MODL SIZ mm V8ZA0() RRNT (A) 0 0
7 4,000,000 A A MAXIMUM LAMING MAXIMUM VOLTAG LAMING VOLTAG MAXIMUM LAMING MAXIMUM VOLTAG LAMING VOLTAG 3,000 MODL 3,000 SIZ MODL 4mm SIZ 4mm MODL SIZ MODL 0mm SIZ 0mm 8 TO 80V 8 TO V36ZA0() V36ZA80() N(D) RATING 80V N(D) RATING T V33ZA0() V33ZA70() A = - Varistor roducts TO 8 o 8 TO 36V 00 N(D) RATING T A = - o TO 8 o 8 TO 36V 00 N(D) RATING,000,000,000 T A = - o TO T A 8= o - TO 8 o 0 0 V7ZA() V7ZA() 800 Radial Lead 700 Varistors V80ZA() > ZA Series V4ZA() V4ZA() V36ZA0() V36ZA80() V36ZA0() V36ZA80() 80 V8ZA() V8ZA() VZA8() V33ZA0() V33ZA70() V33ZA0() V33ZA70(),000, V0ZA6() V7ZA() 0 V7ZA() V7ZA() V7ZA() V0ZA() V4ZA() V4ZA() V4ZA() V4ZA() V80ZA() V80ZA() V8ZA() 80 V8ZA() 80 V8ZA() V8ZA() VZA8() VZA8() V0ZA6() V0ZA6() V0ZA() V0ZA() 00 V8ZA() V8ZA() Maximum lamping Voltage for 0mm arts V8ZA0() - V36ZA80() IGUR. LAMING V39ZA0() VOLTAG OR - V80ZA0() V8ZA() - V80ZA() IGUR. LAMING VOLTAG OR V8ZA() - V ontinued) AK AMRS AK (A) AMRS (A) AK AMRS AK (A) AMRS (A) IGUR MAXIMUM. IGUR LAMING. LAMING LAMING VOLTAG VOLTAG OR VOLTAG V8ZA() OR V8ZA() - V80ZA() - V80ZA() IGUR. IGUR,000 LAMING. LAMING VOLTAG OR VOLTAG V8ZA() OR V8ZA() - V36ZA80() - V36ZA80() MAXIMUM LAMING VOLTAG MODL SIZ 0mm 8 TO 36V 00 N(D) RATING MODL SIZ 0mm T A = - o TO 8 o 39 TO 80V M(A) RATING T A = - o TO 8 o V80ZA0(),000,000 MAXIMUM LAMING MAXIMUM VOLTAG LAMING VOLTAG VZA0() V36ZA0() V36ZA80() MODL SIZ MODL 0mm SIZ 0mm V0ZA0() V33ZA0() V33ZA70() 0 V7ZA() V7ZA() 39 TO M(A) RATING 80V M(A) RATING T A = - o TO T8 o A = - o TO 8 o V80ZA0() VZA0() VZA0() V4ZA() V4ZA() V0ZA0() V0ZA0() V8ZA() V8ZA() V68ZA0() V6ZA0() V47ZA0() V39ZA0() 0 0 V68ZA0() V68ZA0() V6ZA0() V6ZA0() V47ZA0() V47ZA0() 0 V39ZA0() V39ZA0() igure igure - V80ZA() IGUR. LAMING VOLTAG OR V8ZA() -3 - V36ZA80() IGUR LAMING 4 VOLTAG OR V39ZA0() - V80ZA0() AK AMRS AK (A) AMRS (A) Repetitive Surge apability for mm artsulse Rating urves IGUR 3. IGUR LAMING 3. LAMING VOLTAG OR VOLTAG V39ZA0() OR V39ZA0() - V80ZA0() - V80ZA0() AMING VOLTAG 0mm 0 V8ZA0() A) RATING VZA0() - V68ZA0() MODL SIZ mm ulse 8 o V80ZA0() Rating ulse urves Rating urves V8ZA0() 4 MODL SIZ mm VZA0() 0 V0ZA0() VZA0() - V MODL SIZ MODL mm SIZ mm 6 0 V8ZA0() 4 MODL SIZ mm V8ZA0() 0 4 VZA0() MODL SIZ mm - V68ZA0() 0 4 VZA0() - V68ZA0() V68ZA0() 3 3 V6ZA0() 3 V47ZA0() V39ZA0() ,000, , AMING VOLTAG OR V39ZA0() - V80ZA0() 0. IMULS DURATION 0. (μs) IMULS DURATION (μs) ,000,000 IGUR, SURG,000 URRNT RATING URVS OR V8ZA0() IGUR. SURG URRNT RATING URVS OR ,000,000,000,000 IMULS DURATION IMULS (μs) DURATION (μs) IMULS DURATION IMULS (μs) DURATION (μs) VZA0() - V68ZA0() igure 3 igure 4 0 IGUR 4. IGUR mm SURG 4. URRNT SURG RATING URRNT URVS RATING OR URVS V8ZA0() OR V8ZA0() IGUR. IGUR SURG. URRNT SURG RATING URRNT URVS RATING OR URVS OR 4 MODL SIZ mm V8ZA0() - V7ZA0() VZA0() - V68ZA0() VZA0() VZA0() - V68ZA0() - V68ZA0() MODL SIZ mm MODL SIZ 7mm V8ZA0() - V7ZA0() V8ZA() - VZA() , ,000,000 IMULS DURATION (μs) V8ZA0() 0. IGUR. SURG URRNT RATING URVS OR 0. VZA0() - V68ZA0() ,000, ,000,000 igure RRNT (A) IGUR 6. SURG URRNT RATING URVS OR V8ZA0() - V7ZA0() MODL SIZ 7mm 4 V8ZA() - V68ZA() 6 RNT (A) IGUR 7. SURG URRNT RATING URVS OR V8ZA() - VZA(),000, MODL SIZ 7mm V8ZA() - V80ZA() 04 Littelfuse, Inc. 3 Specifications are subjeco change without notice. 4 Revised: //4 6
8 L SIZ mm A0() - V7ZA0() 0,000 µs) URVS OR ODL SIZ 7mm 8ZA() - V68ZA() L SIZ mm A0() - V7ZA0() 00,000 (µs) URVS OR 0,000 µs) URVS OR MODL SIZ mm V8ZA() - VZA() ODL SIZ 7mm 8ZA() - V68ZA() 00,000 (µs) 00 URVS OR,000 (µs) URVS OR Varistor roducts 0 0 Radial Lead Varistors 0 > ZA Series ,000, Repetitive Surge 0apability 0for 7mm arts,000,000 Repetitive 0 Surge apability 0 for mm,000 arts,000 IGUR 8. SURG URRNT IMULS DURATION RATING URVS (µs) OR V8ZA() - VZA() V8ZA() - V7ZA() IGUR 6. SURG URRNT RATING URVS OR IGUR 7. SURG V8ZA() URRNT - V68ZA() RATING URVS OR V8ZA0() - V7ZA0() V8ZA() - VZA() 00 MODL SIZ 7mm,000 MODL SIZ mm 0 4 V8ZA() - VZA() MODL SIZ 7mm MODL V8ZA() SIZ - 7mm VZA() V8ZA() - V68ZA() 4 MODL SIZ mm MODL SIZ 7mm,000 V8ZA() - V80ZA() V8ZA0() - V7ZA0() V8ZA() - VZA() ,000, ,000,000 igure 0 0,000,000 0.igure 80 0 IMULS DURATION,000(µs), ,000, ,000,000 IGUR 7. SURG URRNT IMULS DURATION RATING IMULS (µs) URVS DURATION OR (µs) IGUR 0. IMULS SURG DURATION URRNT (µs) RATING URVS OR V8ZA() - VZA() IGUR 8. SURG URRNT RATING URVS OR IGUR 9. SURG V8ZA() URRNT - V7ZA() RATING URVS OR V8ZA() IGUR,000 - V68ZA() 6. SURG URRNT RATING URVS OR IGUR 7. SURG URRNT RATING URVS OR V8ZA() - V68ZA() V8ZA() - V68ZA3() V8ZA() - V80ZA() V8ZA0() - V7ZA0() MODL SIZ 7mm V8ZA() - VZA(),000 V8ZA() - V80ZA(),000,000 MODL SIZ 7mm MODL SIZ mm MODL SIZ 7mm MODL SIZ mm V8ZA() 4 - V68ZA() V8ZA() - VZA(),000 V8ZA() - V80ZA() 00 MODL 4 V8ZA() - V68ZA3() SIZ 7mm V8ZA() - VZA() ,000, ,000,000,000, ,000,000,000 IGUR SURG URRNT IMULS DURATION RATING IMULS URVS (µs) DURATION OR (µs) IMULS DURATION IMULS (µs) DURATION (µs) igure 6 0 0,000,000 igure 9 V8ZA() - V80ZA() IGUR 8. IGUR SURG 0. URRNT SURG RATING URRNT URVS RATING OR URVS OR IGUR 9. IGUR SURG. URRNT SURG RATING URRNT URVS RATING OR URVS OR,000,000 IGUR 7. SURG V8ZA() URRNT - V8ZA() V68ZA() RATING - V7ZA() URVS OR V8ZA() - V8ZA() V80ZA() - V68ZA3() V8ZA() - V80ZA() MODL SIZ mm V8ZA4() - V80ZA() V8ZA() - VZA() V8ZA() - V68ZA3(),000,000 MODL SIZ mm MODL SIZ mm 00 4 V8ZA() - VZA() MODL SIZ 7mm 4,000 V8ZA() - V68ZA3(), V8ZA() - V80ZA() MODL SIZ mm 6 V8ZA4() - V80ZA() 00, , ,000, ,000, ,000,000 IGUR 0. SURG 0URRNT IMULS DURATION RATING,000 URVS (µs) OR,000 0 IMULS 0 DURATION (µs),000,000 V8ZA() IMULS - V68ZA3() DURATION (µs) igure 7 igure 0 IGUR 0. SURG URRNT RATING URVS OR IGUR. SURG URRNT RATING URVS OR IGUR 9. SURG V8ZA() URRNT - V7ZA() RATING URVS OR IGUR. SURG URRNT RATING URVS OR V8ZA() - V68ZA3() V8ZA() - V80ZA() V8ZA4() - V80ZA() SURG SURG URRNT URRNT (A) (A) SURG SURG URRNT SURG URRNT URRNT (A) (A) (A) SURG SURG SURG URRNT URRNT URRNT (A) (A) (A) SURG SURG URRNT URRNT (A) (A SURG SURG URRNT URRNT (A) (A) IGUR, IGUR, IGUR MODL SIZ mm V8ZA() - VZA(), Littelfuse, 0Inc. Specifications are subjeco change without notice. Revised: //4 3 URRNT (A) 0 MODL SIZ mm V8ZA() - V68ZA3() 4 6 G URRNT (A),000,000, MODL SIZ 4mm V8ZA() - V80ZA() G URRNT (A),000,
9 Repetitive Surge apability for 4mm arts V8ZA3() - V68ZA() V8ZA() - V80ZA() mm 0ZA() R,000 m 0ZA() m ZA(),000,000,000 3 MODL SIZ 4mm,000,000 4 V8ZA3() - V68ZA() MODL SIZ 4mm,000 V8ZA() - V80ZA(), , , ,000 MODL 00 SIZ 4mm MODL SIZ 0 4 0mm,000 V8ZA() - V80ZA(),000 V8ZA() - V68ZA0 0 0, ,000, ,000,000 0 igure igure IGUR 3. SURG URRNT RATING URVS OR V8ZA3() - V68ZA() IGUR 4. SURG URRNT RATING URVS OR IGUR. SURG V8ZA() - V80ZA() V8ZA,000 Repetitive Surge apability for 0mm,000 MODL SIZ arts 0 0,000, ,000 0mm,000,000 IMULS DURATION MODL (µs) SIZ 0mm V8ZA() - V68ZA0() V0ZA0() - V80ZA0 V8ZA() - V68ZA0() 6 V0ZA0() - V80ZA0() IGUR 4. SURG URRNT RATING URVS OR IGUR,000. SURG URRNT RATING URRNT OR V8ZA() - V80ZA(),000 V8ZA() - V68ZA0() 00 3,000, ,000 MODL SIZ 0mm MODL SIZ 0mm V0ZA0() 00 - V80ZA0(),000 4 V8ZA() - V68ZA0(), , ,000, ,000 IGUR. SURG URRNT RATING URRNT OR IGUR 6. SURG URRNT RATING URVS OR V0ZA0 V8ZA() - V68ZA0() 0 0,000,000 MODL 0 SIZ 0mm 0,000,000 V0ZA0() - V80ZA0() igure 3 igure 4 IGUR. SURG URRNT RATING URRNT OR IGUR 6. SURG URRNT RATING URVS OR V0ZA0() - V80ZA0() V8ZA() - V68ZA0() NOT: If pulse ratings are exceeded, a shift of V N(D) (at specified current) of more then +/-% could result. This type of shift, which normally results in a decrease of V N(D), may result in the device not meeting the original published specifications, but does not prevenhe device from continuing to function, MODL and to SIZ provide 0mmample protection. V0ZA0() - V80ZA0() SURG URRNT SURG (A) URRNT (A) 0,000,000 RRNT RATING URVS OR V0ZA0() - V80ZA0() 0,000,000 RRNT RATING URVS OR V0ZA0() - V80ZA0() 04 Littelfuse, Inc. Specifications are subjeco change without notice. Revised: //4
10 ave Solder rofile Non Lead free rofile Lead free rofile Maximum ave Maximum ave TMRATUR (º) 00 0 TMRATUR (º) igure TIM(MINUTS) igure 6 TIM(MINUTS) hysical Specifications nvironmental Specifications Lead Material Soldering haracteristics opper lad Steel ire Solderability per MIL STD 0, Method 08 Operating Ambient Temperature Range Storage Temperature Range - to +8 - to + Insulating Material ured, flame retardant epoxy polymer meets UL94V 0 requirements Humidity Aging +8, 8% RH,00 hours +/-% typical voltage change Device Labeling Marked with L, voltage, UL/SA logos, and date code Thermal Shock +8 to - times +/-% typical voltage change Solvent Resistance MIL STD 0, Method Moisture Sensitivity Level, J STD Littelfuse, Inc. Specifications are subjeco change without notice. Revised: //4
11 roduct Dimensions (mm) A ød ATRIM RIMD AND TRIMMD LAD Radial lead types can be supplied with combination preformed crimp and trimmed leads. This option is supplied to the dimensions shown..4 (.00) MIN e e øb SATING LAN LTRIM *Seating plane interpretation per I-77 To order this crimped and trimmed lead style, standard radial type model numbers are changed by replacing the model letter "ZA" with "Z." This option is supplied in bulk only. xample: Standard Model Order As V8ZA3 V8Z3 or crimped leads withourimming and any varitions to the above, contact Littelfuse. V RMS Voltage Model Min. mm Size 7mm Size mm Size 4mm Size 0mm Size Max. Min. Max. Min. Max. Min. Max. A All - (0.394) - (0.47) - 6 (0.6) - 0 (0.787) - Min. Max. 6. (.043) ØD All - 7 (0.76) - 9 (0.34) -. (0.49) - 7 (0.669) - 3 (0.6) e (see notes below) e Øb All 4 (0.7) 6 (0.36) 4 (0.7) 6 (0.36) 6. (0.6) 8. (0.33) 6. (0.6) 8. (0.33) Dimension V8ZA- V6ZA V68ZA- V0ZA V0ZA- V80ZA V0ZA- V7ZA V8ZA- V6ZA V68ZA- V0ZA V0ZA- V80ZA V0ZA- V7ZA All 6. (0.6) (note below) 8. (0.33) (note below) (0.039) 3 (0.8) (0.039) 3 (0.8) (0.039) 3 (0.8) (0.039) 3 (0.8) (0.039) 3 (0.8). (0.09) 3. (0.38). (0.09) 3. (0.38). (0.09) 3. (0.38). (0.09) 3. (0.38). (0.09) 3. (0.38) (0.039) 3 (0.8) (0.039) 3 (0.8) (0.039) 3 (0.8) (0.038) 3 (0.8) (0.038) 3 (0.8). (0.09) 3. (0.38) (0.97) - (0.97) - (0.97) - (0.97) - (0.97) -.6 (0.0) -.6 (0.0) -.6 (0.0) -.6 (0.0) -.6 (0.0) - (0.97) - (0.97) - (0.97) - (0.97) - (0.97) (0.03) A TRIM All -.6 (0.0) 0.68 (0.07) 3.0 (0.) (0.03) 0.68 (0.07) 0.76 (0.0) 0.86 (0.034) 0.76 (0.0) - (0.9) - 9. (0.768) (0.034). (0.886) 0.76 (0.0) (0.034) 9.0 (.4) L TRIM All.4 (0.09) 4.69 (0.8).4 (0.09) 4.69 (0.8).4 (0.09) 4.69 (0.8).4 (0.09) 4.69 (0.8).4 (0.09) 4.69 (0.8) NOTS: Dimensions in millimeters, inches in parentheses.. or 0mm size devices, a mm "e" dimension option is also available. lease refer to "Ordering Notes" section "X" option code for additional information.. V4ZA() and V4Z() only supplied with lead spacing of 6.3mm -/+0.mm (0. -/+0.096) Dimension e =.8 min. Does not apply to Tape and Reel parts. 04 Littelfuse, Inc. Specifications are subjeco change without notice. Revised: //4
12 Tape and Reel Specifications and 7mm Devices, 4 and 0mm Devices rimped Leads "zt" DH DH rimped Leads "zt" DH DH SATING H H LAN SATING H H LAN SATING SATING H H LAN LAN H0 H0 H0 H0 H0 H rimped Leads 0 0 "ZT" rimped Leads "ZT" rimped Leads "ZT" Straight Leads "zs" SATING H H LAN SATING H H LAN SATING SATING H H LAN LAN H0 H0 H0 H0 H0 H rimped Leads "ZT" rimped Leads "ZT" rimped Leads "ZT" Straight Leads "zs" DH DH DH DH H H H H H H H H H H Db 0 Db 0 0 Straight Leads 0 0 "ZS" Straight Leads "ZS" Straight Leads "ZS" Under rimped Leads "zu" DH DH H H H H H H H H H H Db 0 Db 0 0 Straight Leads "ZS" Straight Leads "ZS" Straight Leads under "ZS" rimped Leads "zu" DH DH H H H H H H Ho Ho Ho Ho Ho Ho Under-crimped 0 0 Leads "ZU" Under-crimped Leads "ZU" Under-crimped Leads "ZU" U U U U H H H H H H Ho Ho Ho Ho Ho Ho Under-crimped 0 0 Leads "ZU" Under-crimped Leads "ZU" Under-crimped Leads "ZU" U U U U Refer to next page for dimension measurement specifics. 04 Littelfuse, Inc. Specifications are subjeco change without notice. Revised: //4
13 Tape and Reel Specifications (continued) NOTS: Radial devices on tape are supplied with crimped leads, straight leads, or under-crimped leads Leads are offset by product dimension e onforms to ANSI and IA specifications an be supplied to I ublication 86- mm parts are available on tape and reel up to 38 VA only SYMBOL DSRITION MODL SIZ mm 7mm mm 4mm 0mm itch of omponent.7 +/ / / / /-.0 0 eed Hole itch.7 +/ / / / /- 0. eed Hole enter to itch 3.8 +/ / / / /- 0.7 Hole enter to omponent enter 6.3 +/ / / / /- 0.7 Lead to Lead Distance.0 +/ / / / /-.0 h omponent Alignment.0 Max.0 Max.0 Max.0 Max.0 Max Tape idth / / / / / Hold Down Tape idth.0 +/ / / / /- 0.3 Hole osition / / / / / -0. Hold Down Tape osition 0. Max 0. Max 0. Max 0. Max 0. Max H Height from Tape enter to omponent Base / / / / / -0.0 H 0 Seating lane Height 6.0 +/ / / / /- 0. H omponent Height 9.0 Max 3.0 Max 36.0 Max.0 Max 46. Max D 0 eed Hole Diameter 4.0 +/ / / / /- 0. t Total Tape Thickness 0.7 +/ / / / /- 0. U Undercrimp idth 8.0 Max 8.0 Max 8.0 Max 8.0 Max 8.0 Max p omponent Alignment 3 Max 3º Max 3 Max 3 Max 3 Max 04 Littelfuse, Inc. Specifications are subjeco change without notice. Revised: //4
14 art Numbering System BAS ART ODS (See Ratings & Specifications tables and notes below) or VARISTOR NOMINAL VOLTAG (V NOM ) (One, Two or Three Digits) V XXX ZA XX SRIS + AKAGING / LAD STYL DSIGNATOR (See BAS ART ODS notes below) ZA = Bulk ack / Straight Leads (standard) Z = Bulk ack / rimped and Trimmed Leads ZS = Tape and Reel / Straight Leads ZT = Tape and Reel / rimped Leads ZU = Tape and Reel / Under-rimped Leads OTION ODS (See notes below) XXXXX See OTIONS ODS notes below or standard parts, use the BAS ART designator only. or parts with non-standard options (such as additional form, packaging and lead space options), use BAS ART + OTION OD. OTION OD items are subjeco availability and minimum order requirements. lease contact a Littelfuse products representative for additional information or questions RLATIV NRGY INDIATOR (One or Two Digits) LAD-R, HALOGN-R AND RoHS OMLIANT INDIATOR OR LTROD Ordering Notes: BAS ART ODS: Series + ackaging / Lead Style Designators: Ordering examples: Straight Lead Bulk ack (standard) Straight Lead Tape & Reel rimped Lead Tape & Reel rimped & Trimmed Lead Bulk ack Under- rimp Lead Tape & Reel V8ZA3 V8ZS3 V8ZT3 V8Z3 V8ZU3 rimped lead ZA Series varistors are supplied standard in tape and reel, denoted with "ZT." "Z" style is supplied in bulk only. "ZU" style is supplied in tape and reel only. OTION ODS: X: MM LAD SAING OTION -- or -/+ mm (0.394-/ in) lead spacing (available on 0mm diameter models only), append standard model BAS ART number with "X." xample: Standard Model V8ZA Order As V8ZAX X8: Nickel Barrier OATD IR OTION -- All standard parts use tinned copper clad steel wire. Nickel Barrier oated wire is available as an option, consisting of opper wire with a flashing of Nickel followed by a top coating of Tin. To order append standard model BAS ART number with "X8." xample: or crimped leads withourimming and any varitions other than that described above, please contact Littelfuse. Standard Model V8ZA Order As V8ZAX8 ackaging and Quantities: Littelfuse ZA Series varistors are shipped standard in bulk pack with straight leads and lead spacing outlined in the ackage Dimensions section of this data sheet. ontact your Littelfuse sales representative to discuss non-standard options. Tape & Reel Quantities: Device Size Voltage Quantity er Reel "S" Reel "T" Reel "U" Reel mm All mm All mm All 4mm < V 0mm < V X347: Hi-Temperature phenolic coating option -- henolic oated -III Series devices are available with improved maximum operating maximum temperature of. To order, add X347 to end of part number (xample: VZA3X347). or additional information please refer to the section labeled "henolic oating Option" within this document. 04 Littelfuse, Inc. Specifications are subjeco change without notice. Revised: //4
Metal-Oxide Varistors (MOVs) Radial Lead Varistors > ZA Series
ZA Varistor Series RoHS Agency Approvals Agency Agency Approval Agency ile Number Description The ZA Series of transient voltage surge suppressors are radial leaded varistors (MOVs) designed for use in
More informationVaristor Products Radial Lead Varistors > ZA Series
RoHS Description The ZA Series of transient voltage surge suppressors are radial leaded varistors (MOVs) designed for use in the protection of low and medium-voltage circuits and systems. Typical applications
More informationVaristor Products Radial Lead Varistors > ZA Series
RoHS Description The ZA Series of transient voltage surge suppressors are radial leaded varistors (MOVs) designed for use in the protection of low and medium-voltage circuits and systems. Typical applications
More informationLow Voltage Series Continous: Steady State Applied Voltage: AC Voltage Range (V M(AC)RMS. ) 14 to 42 V DC Voltage Range (V M(DC)
Varisor roducs Radial Leaded Varisors > AMOV TM Series AMOV TM Varisor Series RoS henolic oaed poxy oaed Descripion The Lielfuse AMOV TM Series of low volage, high surge curren, radial leaded varisors
More informationEV Series 1.5 Amp Sensitive SCRs. Description. Features. Surge capability > 15Amps Blocking voltage (V DRM / V RRM.
Sx02xS Series RoHS Description New mp sensitive gate SR series offers high static dv/dt with low turn off time (tq) through small die planar construction design. ll SR s junctions are glasspassivated to
More informationAgency File Number. Features E1273/F. ) 130 to 1000 V DC Voltage Range (V M(DC)
MealOxide Varisors (MOVs) Radial Lead Varisors > LA Varisor Series LA Varisor Series RoS Descripion The LA Varisor Series of ransien volage surge suppressors are radial leaded varisors (MOVs) ha are designed
More informationMetal-Oxide Varistors (MOVs) Radial Leaded Varistors > AUMOV Varistor Series
MealOxide Varisors (MOVs) Radial Leaded Varisors > AMOV Varisor Series AMOV Varisor Series RoS henolic oaed Silicone oaed Descripion The Lielfuse AMOV Varisor Series of low volage, high surge curren, radial
More informationVaristors to
FEATURES Zinc oxide disc, epoxy coated Straight leads Straight leads with flange (2322 592 and 593 series only) Kinked leads. APPLICATION Suppression of transients. DESCRIPTION The varistors consist of
More informationSamples. Symbol Parameter Test Conditions Value Unit RMS on-state current T C = 40 C 1.5 A I T(AV) Average on-state current T C
TCR22-x Series RoHS Description Excellent unidirectional switches for phase control applications such as heating and motor speed controls. Sensitive gate SCRs are easily triggered with microamps of current
More informationSymbol Parameter Test Conditions Value Unit Sxx15L T C. = 90 C 15 RMS on-state current Sxx16R = 90 C 9.5 I T(AV) Sxx16R
Sxx15x & Sxx16x Series RoHS Description Excellent unidirectional switches for phase control applications such as heating and motor speed controls. Standard phase control SRs are triggered with few milliamperes
More informationSIDACtor Protection Thyristors Broadband Optimized TM Protection. TwinChip Series - DO-214. Description
TwinChip Series - DO-214 RoHS Pb e3 Description TwinChip Series DO-214 are very low capacitance SIDACtor thyristors designed to protect broadband equipment such as VoIP, DSL modems and DSLAMs from damaging
More informationCERAMIC CHIP CAPACITORS
Example below indicates : SNPO series, 470 pf, 5%, 50 Volt, Tape/Reel packed, 0805 case size. (EXAMPLE) S N P O 4 7 1 J 0 5 0 T 2 Series Series Code: SNPO, SX7R, SZ5U, SY5V. Note: SNPO indicates COG(NPO)
More informationFixed Voltage Q2L Series 3.3x3.3 QFN
RoHS Pb e3 Fixed Voltage Q2L Series are uni-directional SIDACtor devices designed to protect SLICs (Subscriber Line Interface Circuit from damaging overvoltage transients. The series provides single line
More informationThyristors 6 Amp Sensitive & Standard SCRs. Sxx06xSx & Sxx06x Series
Sxx06xSx & Sxx06x Series RoHS Description This Sxx06x SCR series is ideal for uni-directional switch applications such as phase control, heating, motor speed controls, converters/rectifiers and capacitive
More informationInterference suppression film capacitors MKP 336 1
MKP RADIAL POTTED TYPE PITCH /15/22.5/27.5 mm l b h lt P d t CBA196 Fig.1 Simplified outlines. FEATURES to 27.5 mm lead pitch Supplied loose in box and taped on reel Consists of a low-inductive wound cell
More information30Vdc Series ELECTRICAL CHARACTERISTICS
RLD P UF Series Devices 2009.10.07 The Radial Leaded devices (RLD Series), a polymer-based Positive Temperature Coefficient (PTC) device to protect electrical circuits against over-current conditions with
More informationTeccor brand Thyristors 0.8 Amp Sensitive SCRs
Description Excellent unidirectional switches for phase control applications such as heating and motor speed controls. Sensitive gate SCRs are easily triggered with microamps of current as furnished by
More informationV V I H. T Part Number Marking
Phillip Havens Oct 2008 SIDCtor Protection Thyristors SDP Biased Series - 5x6 QN RoHS Pb e3 Description This new SDP Biased series provides overvoltage protection for applications such as VDSL2, DSL2,
More informationHigh Precision Wraparound - Wide Ohmic Value Range Thin Film Chip Resistors, Sulfur Resistant
High recision Wraparound - Wide Ohmic Value Range Thin Film Chip Resistors, Sulfur Resistant DESIGN SUORT TOOLS Models Available click logo to get started For low noise and precision applications, superior
More information30 to 35 ma G. Samples. Symbol Parameter Test Conditions Value Unit RMS on-state current T C = 80 C 20 A I T(AV)
Sxx20x & Sxx25x Series RoHS Description Excellent unidirectional switches for phase control applications such as heating and motor speed controls. Standard phase control SCRs are triggered with few milliamperes
More informationZinc Oxide Varistors. VE/VF Types for Heavy Duty Applications ( P Series ) FEATURES PARTICULAR CHARACTERISTICS 18 TPC
VE/VF Types for Heavy Duty Applications ( P Series ) FEATURES P Series are especially dedicated to heavy duty applications encountered in the AC power network. Higher surge current and energy ratings provide
More informationDATA SHEET LOW OHMIC HIGH POWER CHIP RESISTORS RL-High power series (Pb Free) 5%, 1% sizes 0805/1206. Product specification May 30, 2005 V.
DATA SHEET LOW OHMIC HIGH POWER CHIP RESISTORS RL-High power series (Pb Free) 5%, 1% sizes 0805/1206 2 SCOPE This specification describes RL0805/1206 low ohmic high power chip resistors with lead-free
More informationHigh Precision Wraparound - Wide Ohmic Value Range Thin Film Chip Resistors, Sulfur Resistant
High recision Wraparound - Wide Ohmic Value Range Thin Film Chip Resistors, Sulfur Resistant For low noise and precision applications, superior stability, low temperature coefficient of resistance, and
More informationCCDSeries FEATURES ORDERING CODE CCD B 101 K H 7 2 (1) (2) (3) (4) (5) (6) (7) (8) (9) Safety Standard Recognized Ceramic Capacitors
CCDSeries Configuration FEATURES Complying with IEC60384-14 4 th Edition Class X1Y1 and Class X1Y2 Dielectric Strength: AC2600V (r.m.s) for X1Y2 and AC4000V (r.m.s) for X1Y1 High Releability Coated With
More informationTeccor brand Thyristors 1.5 Amp Sensitive SCRs
Description Excellent unidirectional switches for phase control applications such as heating and motor speed controls. Sensitive gate SCRs are easily triggered with microamps of current as furnished by
More informationSamples. Symbol Parameter Test Conditions Value Unit RMS on-state current T C = 90 C 55 A I T(AV) Average on-state current T C
Sxx55x Series RoHS Description Excellent unidirectional switches for phase control applications such as heating and motor speed controls. Standard phase control SCRs are triggered with few milliamperes
More informationPOE INTERNATIONAL CORPORATION. SPECIFICATION OF MULTI-LAYER RADIAL-LEADED TYPE CAPACITOR Ver: 8 Page: 1
SPECIFICATION OF MULTI-LAYER RADIAL-LEADED TYPE CAPACITOR Ver: 8 Page:. Scope: Its specification applies to Radial Series Ceramic Capacitor. 2.How to order: CODE: U RD2 R 02 K T Rated Voltage Code:U =
More informationDATA SHEET ARRAY CHIP RESISTORS YC/TC 164 (8Pin/4R; Pb Free) 5%, 1% sizes
DATA SHEET ARRAY CHIP RESISTORS 164 (Pin/4R; Pb Free) 5%, 1% sizes 4 0603 Supersedes Date of Mar. 06, 2003 2 SCOPE This specification describes YC164 (convex) and TC164 (concave) series chip resistor arrays
More informationMetallized polyester film capacitors MKT 470
MKT RADIAL POTTED TYPE PITCH 5 mm CBA141 Fig.1 Simplified outlines. FEATURES Low-inductive wound cell of metallized (PETP) film Potted with epoxy resin in a flame-retardant case Radial leads of solder-coated
More informationSymbol Parameter Value Unit RMS on-state current (full sine wave) Qxx35P5 T C. f = 120 Hz T J. 10 μs I GT
Description 30 mp / 35 mp bi-directional solid state switch series is designed for C switching and phase control applications such as motor speed and temperature modulation controls, lighting controls,
More informationAC Line Rated Ceramic Disc Capacitors Class X1, 760 V AC, Class Y1, 500 V AC
AC Line Rated Ceramic Disc Capacitors Class X1, 760 V AC, Class Y1, 500 V AC FEATURES Complying with IEC 60384-14 4 th edition Can pass 10 kv pulses (10 per polarity) Withstands 85 / 85 / 1000 h test Reduced
More informationResin-Coated, Radial-Lead Solid Tantalum Capacitors
Resin-Coated, Radial-Lead Solid Tantalum Capacitors ELECTRICAL CHARACTERISTICS Operating Temperature: -55 C to +85 C: type 489D -55 C to +125 C (above 85 C, voltage derating is required): type 499D FEATURES
More informationATC 900 C Series X7R Ceramic RF Power Multilayer Capacitors
AT 900 Series X7R eramic RF Power Multilayer apacitors ase Size apacitance Range (.250" x.250") 0.01 µf to 1 µf Low ESR/ESL Mid-K Rugged onstruction High Reliability Available with Encapsulation Option*
More informationDual High-Voltage Trench MOS Barrier Schottky Rectifier
Dual High-Voltage Trench MOS Barrier Schottky Rectifier Ultra Low V F = 0.53 V at I F = 5.0 A 2 TMBS esmp Series Top View PIN PIN 2 PRIMARY CHARACTERISTICS K Bottom View I F(AV) 2 x A V RRM 0 V I FSM 50
More informationDATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, X5R
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, 6.3 V TO 50 V 10 nf to 100 µf RoHS compliant Product Specification Product specification 2 Surface-Mount
More informationTeccor brand Thyristors 0.8 Amp Sensitive SCRs
EC103xx & SxSx Series RoHS Description Excellent unidirectional switches for phase control applications such as heating and motor speed controls. Sensitive gate SCRs are easily triggered with micromps
More informationATC 200 A Series BX Ceramic Multilayer Capacitors
200 A Series BX Ceramic Multilayer Capacitors Case A Size Capacitance Range (.055" x.055") 5 pf to 0.01 µf Low ESR/ESL Mid-K Rugged High Reliability Construction Extended VDC Available, the industry leader,
More information1W, 1206, Low Resistance Chip Resistor (Lead free / Halogen Free)
1W, 1206, (Lead free / Halogen Free) 1. Scope This specification applies to 1.6mm x 3.2mm size 1W, fixed metal film chip resistors rectangular type for use in electronic equipment. 2. Type Designation
More informationMF-MSMF Series - PTC Resettable Fuses
*RoHS and AE-Q00 OMPLIANT Features ompliant with AE-Q00 Rev-- Stress Test Qualification for Passive omponents 00 % electrically compatible with all previous generations of 8 SMT devices ompatible with
More informationDATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, X5R
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, 6.3 V TO 50 V 10 nf to 100 µf RoHS compliant Product Specification Product specification 2 Surface-Mount
More informationQxx15xx & Qxx16xHx Series
Teccor brand Thyristors Description 15 mp and 16 mp bi-directional solid state switch series is designed for C switching and phase control applications such as motor speed and temperature modulation controls,
More informationExcellent Integrated System Limited
Distributor of omchip Technology: Excellent Integrated System Limited Datasheet of DSQR400-HF - DIDE GEN PURP 80 M 0402 ontact us: sales@integrated-circuit.com Website: www.integrated-circuit.com Excellent
More informationMF-MSMF Series - PTC Resettable Fuses
*RoHS OMPLINT & E PPROVED Features ompliant with E-Q00 Rev-- Stress Test Qualification for Passive omponents in utomotive pplications 00 % electrically compatible with all previous generations of 8 SMT
More informationMF-MSMF Series - PTC Resettable Fuses
*RoHS & E OMPLINT Features n ompliant with E-Q00 Rev-- Stress Test Qualification for Passive omponents in utomotive pplications n 00 % electrically compatible with all previous generations of 8 SMT devices
More information52- Inner Taping dimension or 73- Inner Taping dimension ZB- Z version. UL = UL Version YY = Standard
Precision Fusible safety Wirewound Resistors Axial and SMD Version Ceramic core Flame retardant coating UL42 Recognized (file E330640) ORDERING CODE-Example New SAP Part Nr.: CRF 300 J T - 73-50R UL Serie
More informationTeccor brand Thyristors Silicon Controlled Rectifiers
Description New device series offers high static dv/dt and lower turn off (t q ) sensitive SCR with its small die planar construction SCRs junctions are glass-passivated to ensure long term reliability
More informationDATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, Y5V
Product Specification January 12, 2016 V.6 DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, 6.3 V TO 50 V 10 nf to 47 µf RoHS compliant & Halogen Free
More informationDATA SHEET Metal Element Current Sensing Chip Resistor (Jumper) CLS Series
DATA SHEET Metal Element Current Sensing Chip Resistor (Jumper) 5% SIZE: 0805,1206 & 2512 RoHs Compliant January 19, 2017 V.5 DS-ENG-009 Page: 2 of 14 1. SCOPE 1.1 This specification is applicable to lead
More informationDATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS Mid-voltage NP0/X7R
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS Mid-voltage NP0/X7R 100 V TO 630 V 0.47 pf to 470 nf RoHS compliant & Halogen Free Product Specification Product specification 2 SCOPE This specification
More informationHigh Current Density Surface-Mount Trench MOS Barrier Schottky Rectifier
High Current Density Surface-Mount Trench MOS Barrier Schottky Rectifier Ultra Low V F = 0. V at I F = A FEATURES Trench MOS Schottky technology Available 8 Low forward voltage drop, low power losses High
More informationRoHS compliant & Halogen Free
Product Specification DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CHIP VARISTORS S0402/0603 5.5 V TO 38 V RoHS compliant & Halogen Free 2 SCOPE This specification describes chip varistors with lead-free
More informationDATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS NP0/X5R/X7R
Product Specification May 5, 2017 V.10 DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS 01005 NP0/X5R/X7R 4 V TO 25 V 0.5 pf to 470 nf RoHS compliant & Halogen Free 2 SCOPE This specification describes
More informationDisc Ceramic Capacitors
Professional Ceramic Capacitors - Class I, II and III I-STD-202F The professional ceramic disc capacitors were specially developed for applications in severe environmental conditions, high humidity, temperature,
More informationDC Film Capacitors MKT Radial Lacquered Type
l 467 w FEATURES Available taped and loose in box RoHS compliant Seating plane (1) h APPLICATIONS Blocking and coupling, bypass and energy reservoir. α (2) l t REFERENCE STANDARDS IEC 60384-2 MARKING C-value;
More informationDATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose Class 1, NP0
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose Class 1, 16 V TO 50 V 0.22 pf to 33 nf RoHS compliant & Halogen Free Product Specification August 05, 2011 V.8 Product specification
More informationDual Low-Voltage Trench MOS Barrier Schottky Rectifier
Dual Low-Voltage Trench MOS Barrier Schottky Rectifier Ultra Low V F = 0.3 V at I F = 5.0 A 2 TMBS esmp Series SMPD (TO-263AC) Top View PIN PIN 2 K K Bottom View HEATSINK FEATURES Trench MOS Schottky technology
More informationSolid Tantalum SMD Capacitors TANTAMOUNT, Hi-Rel COTS, Low ESR, Metal Case
Solid Tantalum SMD Capacitors TANTAMOUNT, Hi-Rel COTS, Low ESR, Metal Case PERFORMANCE CHARACTERISTICS Operating Temperature: -55 C to +125 C (above 85 C, voltage derating is required) Capacitance Range:
More informationDATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, X7R
Product Specification May 26, 2015 V.12 DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, 6.3 V TO 50 V 100 pf to 22 µf RoHS compliant & Halogen Free Product
More informationDouble-Sided Chip Resistors
Double-Sided Two parallel resistance elements in a single chip Excellent pulse withstand performance Laser trimmed up to 0.5% tolerance Enhanced working voltage Enhanced power rating Pb-free terminations
More informationDATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS. Mid-voltage NP0/X7R. Product Specification April 16, 2015 V.
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS Mid-voltage NP0/X7R 100 V TO 630 V 0.47 pf to 2.2 µf RoHS compliant & Halogen Free Product Specification April 16, 2015 V.15 Product specification
More informationSuperTan Extended (STE) Capacitors, Wet Tantalum Capacitors with Hermetic Seal
SuperTan Extended () Capacitors, Wet Tantalum Capacitors with Hermetic Seal FEATURES SuperTan Extended () represents a major breakthrough in wet tantalum capacitor Available technology. Its unique cathode
More informationDATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, Y5V
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, 6.3 V TO 50 V 10 nf to 47 µf RoHS compliant & Halogen Free Product Specification Product specification
More information*Contents in this sheet are subject to change without prior notice.
MULTILAYER CERAMIC CAPACITORS Soft Termination High Voltage Series (SH_200V to 3000V) NP0 & X7R Dielectrics 0603 to 1812 Sizes, 200V to 3000V Halogen Free & RoHS Compliance *Contents in this sheet are
More information100 pf to 47µF RoHS compliant & Halogen free
Product Specification August 7, 2017 V.4 DATA SHEET SURFACE MOUNT MULTILAYER CERAMIC CAPACITORS General purpose class II X6S 4 V TO 50 V 0 pf to 47µF RoHS compliant & Halogen free 2 SCOPE This specification
More informationDATA SHEET SURFACE MOUNT MULTILAYER CERAMIC CAPACITORS General purpose & High capacitance Class 2, X5R
DATA SHEET SURFACE MOUNT MULTILAYER CERAMIC CAPACITORS General purpose & High capacitance Class 2, 4 V TO 50 V 100 pf to 100 µf RoHS compliant & Halogen free Product Specification Product specification
More informationResin-Molded, Radial-Lead Solid Tantalum Capacitors
Resin-Molded, Radial-Lead Solid Tantalum Capacitors PERFORMANCE CHARACTERISTICS Operating Temperature: -55 C to +25 C (above 85 C, voltage derating is required) Capacitance Range: 0. μf to 3 μf Capacitance
More informationWet Tantalum Capacitors, High Energy, Ultra High Capacitance, -55 C to +125 C Operation
Wet Tantalum Capacitors, High Energy, Ultra High Capacitance, -55 C to +125 C Operation FEATURES High energy, very high capacitance design All tantalum, hermetically sealed case Available Utilizes proven
More informationDATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, X7R
Product Specification May 12, 17 V.18 DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, 6.3 V TO 50 V 100 pf to 22 µf RoHS compliant & Halogen Free Product
More informationWW25R ±1%, ±5%, 2W Metal plate low ohm power chip resistors Size 2512 (6432)
WW25R ±1%, ±5%, 2W Metal plate low ohm power chip resistors Size 2512 (6432) Current Sensing Type Automotive AEC Q200 compliant *Contents in this sheet are subject to change without prior notice. Page
More informationList... Package outline... Features Mechanical data... Maximum ratings... Rating and characteristic curves... Pinning information...
List List... Package outline... 1 Features... Mechanical data... Maximum ratings... Rating and characteristic curves... 3 Pinning information... 4 Marking... 4 Tube packing... 4 Suggested thermal profiles
More informationWW25Q ±1%, ±5%, 1W Metal plate low ohm power chip resistors Size 2512 (6432)
WW25Q ±1%, ±5%, 1W Metal plate low ohm power chip resistors Size 2512 (6432) Current Sensing Type Automotive AEC Q200 compliant *Contents in this sheet are subject to change without prior notice. Page
More informationWW12C, WW08C, WW06C, WW04C, WW02C. Low ohm chip resistors ( power ) Size 1206, 0805, 0603, 0402, 0201
WW12C, WW08C, WW06C, WW04C, WW02C ±5%, ±1%, ±0.5% Low ohm chip resistors ( power ) Size 1206, 0805, 0603, 0402, 0201 *Contents in this sheet are subject to change without prior notice. Page 1 of 8 ASC_WWxxC_V05
More informationHigh Operating Temperature Radial Leaded Multilayer Ceramic Capacitors for Automotive Applications, 50 V DC, 100 V DC, 200 V DC
High Operating Temperature Radial eaded Multilayer Ceramic Capacitors for Automotive Applications, 5 V DC, 1 V DC, 2 V DC FEATURES AEC-Q2 qualified with PPAP available High reliability MCC insert with
More informationA I DM. W/ C V GS Gate-to-Source Voltage ± 16. Thermal Resistance Symbol Parameter Typ. Max. Units
V DSS 40 V V GS Max ± 6 V R DS(on) max (@V GS = V) 56 mω G 3 D PD - 96309A HEXFET Power MOSFET R DS(on) max (@V GS = 4.5V) Application(s) Load/ System Switch DC Motor Drive 78 mω S 2 Micro3 TM (SOT-23)
More informationC2D10120A Silicon Carbide Schottky Diode Zero Recovery Rectifier
Datasheet: 2D112 Rev. D 2D112A Silicon arbide Schottky Diode Zero Recovery Rectifier RM = 12 V = 1 A Q c = 61 n Features 12-Volt Schottky Rectifier Zero Reverse Recovery urrent Zero Forward Recovery Voltage
More informationCeramic Disc Capacitors Class 1 and 2, 100 V DC, General Purpose
D Series Ceramic Disc Capacitors D D EATURES Low losses High stability Tangent line SH Tangent line DR High capacitance in small size Kinked (preferred) or straight leads Compliant to RoHS directive 2002/95/EC
More informationTeccor brand Thyristors 0.8 Amp Sensitive SCRs
Description Excellent unidirectional switches for phase control applications such as heating and motor speed controls. Sensitive gate SCRs are easily triggered with micromps of current as furnished by
More informationTRM Professional Multianode
Tantalum Ultra Low Capacitor FEATURES Improved reliability 0.5%/1khrs (twice better than standard) reduced by 25% to 0.0075 CV Robust against higher thermo-mechanical stresses during assembly process Multi-anode
More informationSize Inch (mm) 0603 (1608) / (2012) 2.00± ± ± ± (3216) 3.20± ±0.
02M557-09_Rev B - age 1 of 9 roduct Family: art umber Series: Multilayer eramic apacitors General urpose GL Middle/High Voltage Series onstruction: 0, X7R, Y5V dielectric material Wrap around electrodes
More informationVaristor Voltage. D: Disk, S: Square S:Straight, C:Crimped, I:Inner, Y:Y kink Size(mm) B: Bulk (Standard lead 20mm min.)
FEATURES * Wide operating voltages ranging from 5Vrms to 1000Vrms (6Vdc to 1465Vdc). * Fast response time of less than 25nS, instantly clamping the transient over voltage. * igh surge current handling
More information3/4W, 2010 Low Resistance Chip Resistor
1. Scope 3/4W, 2010 This specification applies to 2.5mm x 5.0mm size 3/4W, fixed metal film chip resistors rectangular type for use in electronic equipment. 2. Type Designation RL2550 L - Where (1) (2)
More information2W, 2816, SL Type Low Resistance Chip Resistor (Lead / Halogen Free)
2W, 2816, SL Type (Lead / Halogen Free) 1. Scope This specification applies to 4.2mm x 7.1mm size 2W, fixed metal foil current sensing resistors used in electronic equipment. 2. Features / Applications
More informationResin-Molded, Radial-Lead Solid Tantalum Capacitors
Resin-Molded, Radial-Lead Solid Tantalum Capacitors PERFORMANCE CHARACTERISTICS Operating Temperature: - 55 C to +25 C (above 85 C, voltage derating is required) Capacitance Range: 0. μf to 3 μf Capacitance
More informationSurface Mounted Power Resistor Thick Film Technology
D2TO20 DIMENSIONS in millimeters 1.6 10.1 Surface Mounted Power Resistor 1.25 4.5 FEATURES 20 W at 25 C case temperature Surface mounted resistor - TO - 263 (D2 PAK) style package Wide resistance range
More informationPulse Proof, High Power Thick Film Chip Resistors
-HP e3 STANDARD ELTRICAL SPIFICATIONS SIZE RATED LIMITING DISSIPATION ELEMENT MODEL INCH METRIC P 70 VOLTAGE W U max. AC/DC FTURES Excellent pulse load capability Enhanced power rating Double side printed
More informationSURFACE MOUNT MONOLITHIC CHIP CAPACITORS COG AND TEMPERATURE COMPENSATING TYPES GRM36/39/40/42-6/42-2/43-2/44-1 Series
COG AND TEMPERATURE COMPENSATING TYPES GRM36/39/40/42-6/42-2/43-2/44-1 Series FEATURES Miniature size No Polarity Nickel Barrier Termination Standard highly resistant to metal migration Uniform dimensions
More informationCapacitance Cap. Tol. Suffix construction. Rated voltage 450 VDC
Metallized Polypropylene Film Capacitors Type:ECWFD Plastic Film Capacitors Non-inductive construction using metalized Polypropylene film with flame retardant epoxy resin coating. Features Small size Excellent
More informationHigh Ohmic/High Voltage Resistors
High Ohmic/High Voltage Resistors A metal glazed film is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive layer, tinned electrolytic copper wires are welded
More informationSULFURATION-RESISTANT CHIP RESISTOR
FEATURES ROHS ith good sulfuration-resistant performance Miniature and light weight. Suit for reflow and wave flow solder. Stable electrical capability, high reliability. Low assembly cost, suit for automatic
More informationIRLML2030TRPbF HEXFET Power MOSFET
V DS 30 V V GS Max ± 20 V R DS(on) max (@V GS = V) R DS(on) max (@V GS = 4.5V) m: 54 m: G S PD - 97432 HEXFET Power MOSFET 2 3 D Micro3 TM (SOT-23) Application(s) Load/ System Switch Features and Benefits
More informationLong Side Termination Thick Film Chip Resistors
FEATURES Enhanced power rating Long side terminations Protective overglaze Pure tin solder contacts on Ni barrier layer, provides compatibility with lead (Pb)-free and lead containing soldering processes
More informationNTC Disc Thermistors ND 03/06/09 NE 03/06/09 NV 06/09 APPLICATIONS TECHNOLOGY PERFORMANCE CHARACTERISTICS OPTIONS STANDARDIZATION
ND 03/06/09 NE 03/06/09 NV 06/09 APPLICATIONS Commodity Product: 2 families ND or NE : general purpose NV : professional Alarm and temperature measurement application Temperature regulation application
More informationDATA SHEET THYRISTOR SURGE SUPPRESSORS MODEMS/LINE CARD PXXXXSX series
Product specification November 06, 201 V.0 DATA SHEET MODEMS/LINE CARD series RoHS compliant & Halogen free 2 Thyristor Surge Suppressors (TSS) Data Sheet Description DO-214AA Thyristor solid state protection
More informationA I DM W/ C V GS. Thermal Resistance Symbol Parameter Typ. Max. Units
PD - 9757 IRLML000TRPbF HEXFET Power MOSFET V DS 00 V V GS Max ± 6 V G R DS(on) max (@V GS = 0V) 220 m: 3 D R DS(on) max (@V GS = 4.5V) 235 m: S 2 Micro3 TM (SOT-23) IRLML000TRPbF Application(s) Load/
More informationFunkentstör-Kondensatoren der Klasse X2
STÖRSCHUTZ-KONDENSATOREN Funkentstör-Kondensatoren der Klasse X2 TECHNICAL TERMS EXPLANATION Rated capacitance Capacitance referred to 1 khz, 20 +-1ºC, 65+-2% of relative humidity and 96+- 10 kpa. In case
More informationZener Diodes FEATURES APPLICATIONS
Zener Diodes SMA (DO-4AC) PRIMARY CHARACTERISTICS PARAMETER VALUE UNIT V Z range nom. 3.3 to 00 V Test current I ZT.7 to 80 ma V BR 5. to 95 V V WM 4.7 to 90 V P PPM 40 W T J max. 50 C V Z specification
More informationSolid Tantalum Surface Mount Chip Capacitors TANTAMOUNT, Molded Case, for Medical Instruments
Solid Tantalum Surface Mount Chip Capacitors TANTAMOUNT, Molded Case, for Medical Instruments FEATURES For non-life support medical applications High reliability Weibull grading options DC leakage at 0.005
More informationWW12E, WW08E, WW06E ±5%, ±1% Thick film low ohm chip resistors Size 1206, 0805, 0603 RoHS Exemption free and Halogen free
WW12E, WW08E, WW06E ±5%, ±1% Thick film low ohm chip resistors Size 1206, 0805, 0603 RoHS Exemption free and Halogen free *Contents in this sheet are subject to change without prior notice. Page 1 of 7
More informationData sheet. Form: FBLE3K/b. File name: S10K510GS5_a.doc MODIFICATIONS: New Issue REMARKS: Prepared by Collins-Hunt Release
Form: FB3K/b File name: S10K510GS5_a.doc MODIFITIOS: ew Issue RMRKS: Prepared by ollins-hunt Release signed: P / ollins-hunt signed: signed: QS / Zödl signed: ISSU DT 07.06.04 ISSU a PUBISHR KH P VR PG
More informationC 052 C 272 F 2 G 5 T A Rated Voltage (VDC) 1 = = 200. Capacitance Tolerance 1. D = ±0.5 pf F = ±1% G = ±2% J = ±5% K = ±10%
Radial Through Hole Multilayer Ceramic Capacitors Radial, Molded, C0G Dielectric, 50 200 VDC (Commercial Grade) Overview KEMET s epoxy molded radial through-hole ceramic capacitors in C0G dielectric feature
More information