3mm Surface Mount, Single-Turn, Sealed Cermet Trimmers
|
|
- Jayson Wilson
- 5 years ago
- Views:
Transcription
1 TOCOS POTENTIOMETERS 3mm Surface Mount, Single-Turn, Sealed Cermet Trimmers RoHS Compliant IMPROVED DESIGN Pb-Free and Cd-Free Features 3mm square SMD, single-turn, sealed cermet trimmers Available in J-hook and gull-wing terminal configurations Meets EIA, EIAJ, IPC, VECI standard SMD trimmer designs Pb-free and Cd-free construction RoHS compliant Gold-plated leads provide high conductivity, low contact resistance, high corrosion resistance and good solderability Top cross-slot adjustment (top single-slot models available as special order) Tape and reel packaging Specifications Electrical Standard Resistance Range Ω to 2MΩ (standard 1, 2 & 5 sequence) Resistance Tolerance % standard End Resistance % or 3Ω, whichever is greater Resistance Taper B = Linear Peak Noise (C.R.V.) % or 3Ω, whichever is greater Power Rating watt at 70 C; 0 watt at 125 C Maximum Input Voltage VDC or power rating, whichever is smaller Temperature Coefficient.... ppm/ C, Ω to 1MΩ 2ppm/ C, other values Insulation Resistance MΩ minimum at 0VDC Dielectric Strength VAC, 1 minute Adjustment Travel Mechanical Mechanical Travel Shaft Torque gf cm (0.69 oz in) max. Stop Strength gf cm (2.77 oz in) min. Flammability of Plastic Materials Meets UL 94V-0 Nominal Weight g Marking Resistance value or code, date code Environmental Temperature Range C to 125 C Low Temperature Operation C, watt, 1 hour T/R ) 2%, S.S. ) 2% High Temperature Exposure C, 2 hours T/R ) 2%, S.S. ) 2% Load Life C, watt, 1,000 hours T/R ) 3%, S.S. ) 2% Thermal Shock C, 125 C, 30 minutes each, 5 cycles T/R ) 2%, S.S. ) 1% Shock G, 6ms, 6 directions, 3 times each T/R ) 1%, S.S. ) 1% Vibration ,000Hz, 1.5mm amplitude, 20G, 12 hours T/R ) 1%, S.S. ) 1% Humidity C, 90-95%RH, watt, 0 hours T/R ) 3%, S.S. ) 2% Moisture Resistance C to 65 C, 80-98%RH, watt, 10 cycles, 240 hours T/R ) 3% Soldering Heat Resistance C, 10 seconds T/R ) 1% Seal Test C, hot water for 1 minute Rotational Life.... cycles without discontinuity, no load T/R ) 5% T/R = Total Resistance Change; S.S. = Setting Stability (voltage ratio) 1/5 11
2 Dimensions J-Hook, Cross-Slot, Top Adjust (t=0.15) , (2) Gull-Wing, Cross-Slot, Top Adjust 3.4 (t=0.15) 0.7 () , 0 (2) Cross-Slot Dimensions Electrical Schematic All G32 Models clockwise ccw cw wiper Cross-Slot accepts both Philips and single blade adjustment tools. 2/5
3 Recommended Land Patterns Flow Soldering Method Soldering Guidelines R R Reflow Soldering Method Recommended Soldering Profiles Flow Soldering Profile Reflow Soldering Profile 2 TP 260 C Max. Peak Temp. TM 230 C Solder Melting Temp. 2 TP 260 C Max. Peak Temp. TM 230 C Solder Melting Temp. Temperature ( C) 1 (180 C) (140 C) ts.* 5 sec. Solder Melting Time Temperature ( C) 1 (190 C) (170 C) Pre-Heat Zone 2 min. ts.*40 sec. Solder Melting Time Time (min.) Time (min.) 3/5
4 Tape & Reel Specifications Embossed Tape Dimensions Conforms to EIA-481, JIS-C-0806 and EIAJ-RC-9B T, T Ø1.5, Direction of Feed Ø Reel Dimensions Conforms to EIA-481, JIS-C-0806 and EIAJ-RC-9B T, T 13.0 Ø Ø Ø60.0, 0 Ø Pieces Per 7 Reel 4/5
5 G32 A T B 105 M Part Numbering System Resistance Tolerance: M = 20% Resistance Code: Expressed in ohms. A three digit code where the first two digits are significant figures, and the third digit indicates the number of zeros that follow these figures (i.e., = 10Ω; 101 = Ω; 102 = 1,000Ω; 105 = 1,000,000Ω). Resistance Taper: B = Linear. Packaging: T = Tape & Reel; Blank = Bulk. Terminal Style: A = J-Hook; B = Gull-Wing. TOCOS Series Name. Part Numbers Value (Ω) Nominal Resistance Code Resistance Tolerance 20% Catalog No. Tape & Reel Catalog No. Bulk Potentiometer Styles J-Hook, Cross-Slot, Top Adjust 0 1,000 2,000 5,000 10,000 20,000,000,000,000 0,000 1,000,000 2,000, T B 0 M T B 101 M T B 201 M T B 1 M TB102M T B 202 M T B 2 M TB103M T B 203 M T B 3 M TB104M T B 204 M T B 4 M TB105M T B 205 M B 0 M B 101 M B 201 M B 1 M B 102 M B 202 M B 2 M B 103 M B 203 M B 3 M B 104 M B 204 M B 4 M B 105 M B 205 M Gull-Wing, Cross-Slot, Top Adjust 0 1,000 2,000 5,000 10,000 20,000,000,000,000 0,000 1,000,000 2,000, T B 0 M T B 101 M T B 201 M T B 1 M TB102M T B 202 M T B 2 M TB103M T B 203 M T B 3 M TB104M T B 204 M T B 4 M B 0 M B 101 M B 201 M B 1 M B 102 M B 202 M B 2 M B 103 M B 203 M B 3 M B 104 M B 204 M B 4 M 105 TB105M B 105 M 205 T B 205 M B 205 M Packaging Standard: Tape & Reel Packaging Bulk Packaging 0 pieces per 7 reel. pieces per vinyl bag. 1,000 pieces per box. Cleaning Guidelines For cleaning and other information, refer to Guidelines and Precautions for Using Potentiometers. 5/5
1/4 Square, Single-Turn, Through-Hole Sealed Cermet Trimmers. Environmental
TOCOS POTENTIOMETERS 1/4 Square, Single-Turn, Through-Hole Sealed Cermet Trimmers Features 1/4 square, single-turn, through-hole, sealed cermet trimmers Top and side adjust styles available Larger diameter
More informationST-32 SURFACE MOUNT CERMET TRIMMERS (SINGLE TURN) S T E T A ( 1 2 ) FEATURES PART NUMBER DESIGNATION
SURFACE MOUNT CERMET TRIMMERS (SINGLE TURN) ST- RoHS compliant INTERNAL STRUCTURE 7 6 5 4 9 8 FEATURES 4 5 6 7 8 9 Part name Wiper Cover Housing Terminal pin Base element O ring Rotor Electrode Resistive
More informationSM-3/31 SURFACE MOUNT CERMET TRIMMERS. S M - 3 T W 1 k ( ) FEATURES PART NUMBER DESIGNATION
SURFCE MOUNT CERMET TRIMMERS SM-/ RoHS compliant INTERNL STRUCTURE 6 9 8 7 FETURES 6 7 8 9 Part name Housing Base element Electrode Resistive element dhesive Wiper Terminal pin Rotor gear Shaft Material
More informationSM-42/43 SURFACE MOUNT CERMET TRIMMERS COPAL ELECTRONICS S M - 4 T W Ω ( ) FEATURES PART NUMBER DESIGNATION.
SURFCE MOUNT CERMET TRIMMERS RoHS compliant INTERNL STRUCTURE 9 8 7 FETURES Lead-free soldering, Cadmium-free Fine adjustment is available utomatic mounting is available (Taping) Reflow soldering is available
More informationSM-42/43 SURFACE MOUNT CERMET TRIMMERS S M - 4 T W Ω ( ) FEATURES PART NUMBER DESIGNATION
SURFCE MOUNT CERMET TRIMMERS RoHS compliant INTERNL STRUCTURE 9 8 7 FETURES 7 8 9 Part name Material Flammability Housing Polyphenylenesulphide UL9V- Base element Ceramic Electrode g-pd cermet Resistive
More informationSM-42/43 SURFACE MOUNT CERMET TRIMMERS S M - 4 T W Ω ( ) FEATURES PART NUMBER DESIGNATION. RoHS compliant
SURFCE MOUNT CERMET TRIMMERS RoHS compliant INTERNL STRUCTURE 9 8 7 FETURES RoHS compliant Fine adjustment is available utomatic mounting is available (Taping) Reflow soldering is available Sealed construction
More informationSM-42/43 SURFACE MOUNT CERMET TRIMMERS S M - 4 T W Ω ( ) FEATURES PART NUMBER DESIGNATION. RoHS compliant
SURFCE MOUNT CERMET TRIMMERS RoHS compliant FETURES RoHS compliant Fine adjustment is available utomatic mounting is available (Taping) Reflow soldering is available Sealed construction (Washable) INTERNL
More informationSINGLE TURN CERMET TRIMMERS
SINGLE TURN INTERNAL STRUCTURE 4 5!0 9 8 6 FEATURES Lead-free soldering, Cadmium-free Various configurations to choose from Wide variety (4 types) O ring sealed and washable 4 5 6 8 9!0 Part name Housing
More informationCOPAL ELECTRONICS. F T T V 5 k Ω ( ) SINGLE TURN CERMET TRIMMERS FEATURES PART NUMBER DESIGNATION
SINGLE TURN INTERNAL STRUCTURE 4 5 8 6 FEATURES Lead-free soldering, Cadmium-free Nominal resistance tolerance ± 0 % O ring sealed and washable Suitable for automatic insertion and automatic adjustment
More informationCFP PIANO SWITCHES (FULL PITCH) FEATURES APPLICATIONS PART NUMBER DESIGNATION C F P T B
CFP RoHS compliant INTERNA STRUCTURE FEATURES Part name Cover Material Flammability Slider Housing Polyamide U94V- Slider contact APPICATIONS Fixed contact Terminal pin Copper alloy, Gold-plated Piano
More informationSC-1000/2000 ROTARY CODED SWITCHES S C T B FEATURES PART NUMBER DESIGNATION. Please refer to the LIST OF PART NUMBERS when placing orders.
SC-00/2000 RoHS compliant INTERNAL STRUCTURE SC-00 / 2000 series 4 2 3 6 7 5 FEATURES Part name Material Flammability Housing Metallic spring O ring Insert rotor Polyphenylenesulphide Stainless (SUS 30)
More informationFT-63 SINGLE TURN CERMET TRIMMERS. F T E T V 5 k Ω ( ) FEATURES PART NUMBER DESIGNATION. RoHS compliant
SINGLE TURN FT-6 RoHS compliant INTERNAL STRUCTURE 4 5 8 6 FEATURES RoHS compliant Resistance tolerance ± 0 % O ring sealed (Washable: Refer to 68) Suitable for automatic insertion and automatic adjust
More informationSD-1000/2000 ROTARY CODED SWITCHES S D T B FEATURES PART NUMBER DESIGNATION. Please refer to the LIST OF PART NUMBERS when placing orders.
SD-00/2000 RoHS compliant INTERNAL STRUCTURE SD-00 / 2000 series Part name Material Flammability FEATURES Housing Polyphenylenesulphide UL9V-0 Metallic spring O ring Insert rotor Base Stainless (SUS 30)
More informationDATA SHEET Metal Element Current Sensing Chip Resistor (Jumper) CLS Series
DATA SHEET Metal Element Current Sensing Chip Resistor (Jumper) 5% SIZE: 0805,1206 & 2512 RoHs Compliant January 19, 2017 V.5 DS-ENG-009 Page: 2 of 14 1. SCOPE 1.1 This specification is applicable to lead
More informationCS-32 ROTARY SELECTOR SWITCHES (SMD) C S Z E T A FEATURES PART NUMBER DESIGNATION
ROTARY SELETOR SWITHES (SMD) S-3 RoHS compliant INTERNAL STRUTURE Part name Material Flammability FEATURES Wiper over Housing Terminal pin Base element Multi metal alloy Stainless steel (SUS 34) Epoxy
More informationC V S T B T 1 0 ( )
SLIDE SINGLE SWITCHES TURN WIREWOUND ( mm TRIMMERS PITCH) -6/- -T 6 FEATURES Lowest profile design of. mm Fine pitch of mm Easy motion with knob height of 0. mm 6 Part Part name name Material Material
More informationBase S C T B
OPAL ELETRONIS ROTARY ODED SWITHES S-00/2000 RoHS compatible INTERNAL STRUTURE S-00 / 2000 series 4 2 3 6 FEATURES Lead-free soldering Fine click with metallic spring Low profile of 3.9 mm makes perfect
More informationCFP PIANO SWITCHES (FULL PITCH) FEATURES APPLICATIONS PART NUMBER DESIGNATION C F P T B. RoHS compliant
RoHS compliant INTERNA STRUCTURE FEATURES RoHS compliant High-reliability 1 Part name Cover Slider Housing Material Polyamide Flammability U9V- Slider contact APPICATIONS Communication devices, Air-conditioning
More informationPTF Series Long Life Slide Potentiometer
*RoHS COMPLIANT Features Long life carbon element Assortment of resistance tapers 45 mm, 60 mm and 00 mm travel lengths Single and dual gang elements Long operational life Tracking error within ± db PTF
More informationDATA SHEET General Purpose Thick Film Chip Resistor CR Series
Towards Excellence in Quality, Service & Innovation DATA SHEET General Purpose Thick Film Chip Resistor 1% TO 5%, TCR -200 TO +600 SIZE: 01005/0201/0402/0603/0805/1206/1210/2010/2512 RoHs Compliant Jan
More informationCR-PF Series Ultra-Low Lead Content Thick Film Resistor
RoHS COMPLIANT** & HALOGEN FREE*** 102 Features n Ultra-low lead (Pb) content* n Green technology n High reliability and stability n Thick film paste on high grade ceramic substrate n RoHS compliant**
More information5 mm Square Surface Mount Miniature Trimmers Multi-Turn Cermet Sealed
5 mm Square Surface Mount Miniature Trimmers Multi-Turn Cermet Sealed DESIGN SUPPORT TOOLS Models Available click logo to get started FEATURES 0.5 W at 70 C Professional and industrial grade Wide ohmic
More informationS-7000 ROTARY CODED SWITCHES (SMD) S E T A FEATURES PART NUMBER DESIGNATION. Please refer to the LIST OF PART NUMBERS when placing orders.
S- RoHS compliant INTERNL STRUCTURE Part name Material lammability ETURES Cover Stainless steel (SUS ) O ring Rotor Spacer Moving contact ixed contact Silicone rubber Polyphenylenesulphide Stainless steel
More informationProsperity Dielectrics Co., Ltd. 1 ACS-1045 Rev15
1. DESCRIPTION MLCC consists of a conducting material and electrodes. To manufacture a chip-type SMT and achieve miniaturization, high density and high efficiency, ceramic condensers are used. WTC high
More information50 TZV 1500 M JDE VB 18X21.5
EXTENDED BASE FEATURES: VB- VIBRATION BASE AEC-Q200 SURFACE MOUNT ROHS COMPLIANT APPLICATIONS: AUTOMOTIVE POWER INDUSTRIAL SPEC: VALUE: MPN :50 TZV 1500 M JDE VB 18X21.5 VDC 50 CAPACITANCE 1500μF +/- 20%
More information3/8" Square Panel Potentiometer Miniature - Cermet - Fully Sealed
P0 /8" Square Panel Potentiometer Miniature - Cermet - Fully Sealed P0 panel potentiometer combines the very good setting stability offered by trimmers (due to their proprietary multifinger wiper), with
More informationType Plunger Height x pitch Operating force (OF) Without ground terminal Flat type 4.3 x 6.5 mm General 0.98 N (100 gf) B3F-6000 B3F-6100
Mechanical Key Switch (Ral) B3F- Taped Ral Switches Automatic mounting possible via general- ral taped component inserters. Conform to EIAJ RC 1008A Electronic Component Taping Dimensions. The same snap-action
More informationLow Inductance Ceramic Capacitor (LICC)
Low Inductance Ceramic Capacitor (LICC) LICC(Low Inductance Ceramic Capacitor) is a kind of MLCC that is used for decoupling in High Speed IC. The termination shape of LICC is different from that of MLCC.
More informationPRODUCT SPECIFICATION 1 SCOPE APPLICABLE STANDARDS CATALOG NO. STRUCTURE..3 4 CONNECTOR SHAPE, DIMENSIONS AND MARTERIALS..
1 of 1 A Table of Contents: 1 SCOPE.. 3 2 APPLICABLE STANDARDS..... 3 3 CATALOG NO. STRUCTURE..3 4 CONNECTOR SHAPE, DIMENSIONS AND MARTERIALS..3 5 ACCOMMOD CONDUCTORS (CIC).....3 6 PACKAGING CONDITION........3
More informationCurrent Sensing Resistor Shunt Type >SMS Series
Page: 1 of 6 General Chip size from 3921 to 5931. Resistance value from 0.2m to 3m Low thermal EMF. Low TCR. Lead free, RoHS compliant for global. pplications and halogen free. pplication Switching model
More informationMulti-layer ceramic chip capacitors
Multi-layer ceramic chip capacitors (15 (42) size, chip capacitor)!features 1) Small size (1. x.5 x.5 mm) makes it perfect for lightweight portable devices. 2) Comes packed either in tape to enable automatic
More informationChip Inductors. LCCM Series Chip Common Mode Filter FEATURES CONSTRUCTION
FEATURES Small wire wound chip inductor with ferrite core and 2 common mode lines. Highly effective in noise suppression High common-mode impedance at noise band an low differential mode impedance at signal
More informationINPAQ. Specification. WIP252012S L Series. Product Name. Power Inductor. Size EIAJ Global RF/Component Solutions
WIP252012S L Series Specification Product Name Series Power Inductor WIP252012S L Series Size EIAJ 2520 WIP252012S L Series Engineering Specification 1. Scope Feature High saturation current realized by
More informationCurrent Sensing Resistor Shunt Type >SMS Series. General. Application
Page: 1/ 7 General Chip size from 2512 to 5931 Resistance value from 0.2m to 4m Low thermal EMF Low TCR Lead free, RoHS compliant for global pplications and halogen free pplication Switching model power
More informationProduct Data Sheet PD-0053-A
Product Data Sheet PD-0053-A 3M Mini D Ribbon (MDR) Connector MDR Surface Mount 102XX-1210 XE 102XX-1S10 XE Page: 1 of 11 Table of Contents 1.0 SCOPE...2 2.0 PRODUCT TESTED...2 3.0 GENERAL CONDITIONS...2
More informationHigh Voltage MLC Chips
NEW 630V RANGE HOW TO ORDER 1808 A A 271 High value, low leakage and small size are difficult parameters to obtain in capacitors for high voltage systems. AVX special high voltage MLC chip capacitors meet
More informationFMS series Metal Strip Shunt Lead Free Current Sensing Resistors
1. Features......2 2. Applications...... 2 3. Dimension and construction.. 2 4. Power Derating Curve....3 5. Rating.3 6. Part Number.. 3 7. Marking / Soldering..4 8. Reliability Performance..5 9. Packing.
More informationSurface Mount UV LED. NUVA33 Series PART NUMBERING SYSTEM. WAVELENGTH CODES Code Nominal Wavelength
FEATURES SURFACE MOUNT 3.4mm x 3.4mm x 2.37mm WAVELENGTH 365 ~ 45nm FOR UV CURING, PHOTO CATALYST & SENSOR LIGHTING RoHS COMPLIANT COMPATIBLE WITH REFLOW SOLDERING TAPE AND REEL PACKAGING SPECIFICATIONS
More informationSuper High AUTO (SHA) Series
PART NO. SFI1206SA240-1R5J 1.1 Technology Data Symbol Value Unit Maximum allowable continuous DC voltage V DC 12 V Breakdown voltage measured Vv 24(±10%) V Maximum clamping voltage V CLAMP < 40 V Maximum
More informationChip Trimmer Potentiometer
Chip Potentiometer RH0/RH0 Series A general purpose, compact, and low-profile type that is suitable for a wide range of applications. Car Use Features Conforms to JIS C 0806- (Packaging of surface mount
More information/ NTSSeries NTFSeries Temperature cycle : 1000 cycles
/ NTSSeries NTFSeries Temperature cycle : 00 cycles FEATURES 1. Large capacitance by small size. 2. Excellent noise absorption. 3. High permissible ripple current capability. 4. NTF: Temperature cycle
More informationFrelTec GmbH. Thick Film Chip Resistor SMD Low Ohm
GmbH Mathildenstr. 10A 82319 Starnberg Germany Thick Film Chip Resistor SMD Low Ohm 9/10/2012 1/13 GmbH www.freltec.com SPECIFICATION Part Number 016 05 * 001k * J * T05 ** *** Type Size Value Tolerance
More informationMIL-PRF-39035, Char. H with a Smooth and Unidirectional Output
Accutrim 240 (RJ26 Style) Bulk Metal Foil Technology Ultra High Precision Trimming Potentiometers, / 4 " Square, RJ26 Style, Designed to Meet or Exceed The Requirements of MIL-PRF-905, Char. H with a Smooth
More informationElectrical Specifications - RMCF. Resistance Power Rating. Maximum Ohmic Range (Ω) and Tolerance (2) Temperature 70ºC. 30V 0.
Features: RMCF standard power ratings RMCP high power ratings Nickel barrier terminations standard Power derating from 100% at 70ºC to zero at +155ºC RMCF package sizes 0402 through 2512 are qualified
More informationS SERIES X1/Y2 SAFETY CAPACITOR SPEC
FEATURES - Peak Impulse Surge: 5,000 VDC - Dielectric withstand strength: 1,500VAC PART NUMBER DESCRIPTION 1808 S 302 N 100 J C E Size Series Rated Voltage Dielectric Capacitance Tolerance Termination
More informationCHIP TRIM CERAMIC TRIMMER CAPACITORS AT 0300 RoHS & AT 1300 RoHS
AT 0300 & AT 1300 SURFACE MOUNT TRIMMER CAPACITORS, COMPLIANT Description Very compact package type Ceramic dielectric Special design for reflow soldering use Rated voltage 100 VDC Low temperature coefficient
More informationElectrical Specifications. Resistance Power Rating. Maximum. Temperature 70ºC 1% 5% 300V. 2 Amp 400V RMCF2512 1W.
Features: RMCF standard power ratings RMCP high power ratings Nickel barrier terminations standard Power derating from 100% at 70ºC to zero at +155ºC RMCF package sizes 0402 through 2512 are qualified
More informationLKT. Low Voltage Multilayer Chip Ceramic Capacitor. Capacitance and Capacitance Tolerance
Capacitance and Capacitance Tolerance Different circuit needs different capacitance and capacitance tolerance. So the selection of capacitance is depended on the need of customers. Dielectric Material
More informationSurface Mounted Power Resistor Thick Film Technology
D2TO20 DIMENSIONS in millimeters 1.6 10.1 Surface Mounted Power Resistor 1.25 4.5 FEATURES 20 W at 25 C case temperature Surface mounted resistor - TO - 263 (D2 PAK) style package Wide resistance range
More informationFIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE & HIGH OHM. RoHS COMPLIANCE ITEM Halogen and Antimony Free
Spec. No.: RHC K HTS 0001 /8 Date: 2017. 1. 10 Specification Title: FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE & HIGH OHM Style:,20 RoHS COMPLIANCE ITEM Halogen and Antimony Free Product specification
More informationMultilayer Ceramic Chip Capacitors
HIGH VOLTAGE SERIES JARO high voltage series Multilayer Ceramic Capacitors are constructed by depositing alternative layers of ceramic dielectric materials and internal metallic electrodes, by using advanced
More informationNo Item Code Description Series Reference. Thickness. M B min (mm) T (mm) code. See Thickness Specification Reference Table below
FEATURE A wide selection of sized is available (0201 to 2225) High capacitance in given case size Capacitor with lead-free termination (pure Tin) RoHS and HALOGEN compliant. Application: DC to DC converter.
More informationCeramic Tuning Tools CTZ Series Ultraminiature Trimmer Capacitors TCX, TCF, TSR, TSX, TSF, TSW Series
Trimmer Capacitors Multilayer Ceramic Chip Trimmer Capacitors CTZ2 Series... 3-6 CTZ3 Series... 7-10 Test Methods...11 Chip Trimmer Capacitor Packaging CTZ2 / CTZ3 Series... 12 Ceramic Tuning Tools CTZ
More informationOpen-mode Design Capacitors
Open-mode Design Capacitors HOW TO ORDER OP 32 B 103 K 201 C T Series Size Dielectric Capacitance Tolerance Rated voltage Termination Packaging OP=Open-mode 21=0805 (2012) 31=1206 (3216) B=X7R Two significant
More information1.2 Scope: This specification is applied Noise Filter STC-D series supplied
1.0 PURPOSE / SCOPE 1.1 Purpose: To define the quality of Noise Filter STC-D series. 1.2 Scope: This specification is applied Noise Filter STC-D series supplied by SMI-ED. 2.0 GENERAL 2.1 Reference 2.1.1
More informationMetal Oxide Varistor:TVM-B Series
Features. RoHS & Halogen Free (HF) compliant. EIA size: 040 ~ 0 3. Operating voltage: 5.5Vdc ~ 85Vdc 4. High surge suppress capability 5. Bidirectional and symmetrical V/I characteristics 6. Multilayer
More informationWW25R ±1%, ±5%, 2W Metal plate low ohm power chip resistors Size 2512 (6432)
WW25R ±1%, ±5%, 2W Metal plate low ohm power chip resistors Size 2512 (6432) Current Sensing Type Automotive AEC Q200 compliant *Contents in this sheet are subject to change without prior notice. Page
More informationWW25Q ±1%, ±5%, 1W Metal plate low ohm power chip resistors Size 2512 (6432)
WW25Q ±1%, ±5%, 1W Metal plate low ohm power chip resistors Size 2512 (6432) Current Sensing Type Automotive AEC Q200 compliant *Contents in this sheet are subject to change without prior notice. Page
More informationSafety Certificated Capacitors X2/Y3
Safety Certificated Capacitors X2/Y3 HOW TO ORER S3 42 N 100 J 202 L T Series Size ielectric Capacitance Tolerance Rated voltage Termination Packaging S3=X2/Y3 42=1808 (4520) 43=1812 (4532) N=NP0 (C0G)
More informationMetal Oxide Film Resistors Axial Connections Metal Oxide Film Resistors 1/4W, 5% Components
Metal Oxide Film Resistors Axial Connections Metal Oxide Film Resistors 1/4W, 5% Components High safety standard, high purity ceramic core Excellent non-flame coating Stable performance in diverse environment,
More information2W, 2816, SL Type Low Resistance Chip Resistor (Lead / Halogen Free)
2W, 2816, SL Type (Lead / Halogen Free) 1. Scope This specification applies to 4.2mm x 7.1mm size 2W, fixed metal foil current sensing resistors used in electronic equipment. 2. Features / Applications
More information3M Pak 10 Plug, PK10 series PK10-XXXPX-X-DA. 3M Pak 10 Socket, PK10 series PK10-XXXSX-X-DA
Page of 8 M Pak 0 Plug, PK0 series PK0-XXXPX-X-DA M Pak 0 Socket, PK0 series PK0-XXXSX-X-DA Product Specification Revised 08-0- Page of 8 Table of Contents Title Page.............................................................................
More informationHigh Voltage MLC Chips
HOW TO ORDER NEW 630V RANGE 1808 A A 271 K AVX Voltage Temperature Capacitance Code Capacitance Style 600V/630V = C Coefficient (2 significant digits Tolerance 0805 1000V = A NPO (C0G) = A + no. of zeros)
More informationWIP201610P L Series Engineering Specification
RoHS Pb WIP16P L Series Engineering 1. Scope Feature High saturation current realized by material properties and structure design Low DC resistance to achieve high conversion efficiency and lower temperature
More informationData sheet FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE RMC1/32,1/20,1/16S,1/16,1/10,1/8,1/4,1/2,1. AEC-Q200 qualified (Without RMC1/32)
No.: RMC-K-HTS-0006 /11 Date: 2017. 4. 18 Data sheet Title: Style: RMC1/32,1/20,1/16S,1/16,1/10,1/8,1/4,1/2,1 AEC-Q200 qualified (Without RMC1/32) RoHS COMPLIANCE ITEM Halogen and Antimony Free Note: Stock
More informationWIP252012P L Series Engineering Specification
RoHS Pb WIP212P L Series Engineering 1. Scope Feature High saturation current realized by material properties and structure design Low DC resistance to achieve high conversion efficiency and lower temperature
More informationSPECIFICATION FOR APPROVAL
SPECIFICATION FOR APPROVAL THICK FILM CHIP RESISTOR STANDARD TYPE CHIP RESISTOR ARRAY TYPE CHIP RESISTOR CONTENTS 1. STANDARD TYPE CHIP RESISTOR 1 2. ARRAY TYPE CHIP RESISTOR 4 3. THICK FILM CHIP RESISTOR
More informationTEA10402V15A0 Engineering Specification
TEA10402V15A0 Engineering 1. Scope This specification is applied to electrostatic discharge (ESD) protection. It is designed to protect the high-speed data lines against ESD transients. It has very low
More informationThick Film Chip Resistors (CR, CJ Series)
Thick Film hip Resistors (R, J Series) Structure and material D E Features Low Noise Nickel arrier Terminations pplication General Purpose ode Structure Material oating Glass or Epoxy Resistor RuO2 Resistor
More informationElectronics Corp. Multi-Layer Ceramic Capacitor. Lead-free termination is in compliance with the requirement of green plan and ROHS.
X5R, X7R Dielectrics Features A monolithic structure ensures high reliability and mechanical strength. High capacitance density. A wide range of capacitance values in standard case size. Suitable for high
More informationSMD Switch SI-C3436A General specification. Soldering conditions Reflow Soldering condition. Standard Reel Dimensions (mm) Packing specification
SMD Switch SI - C3436A - 7017 Features External Dimensions : 3.4mm x 3.6mm, Height 0.70mm Suitable for thinner and lighter portable devices Suitable for water proof devices Reflow soldering Package With
More informationPTL Series Slide Potentiometer w/led
*RoHS COMPIANT Features n Carbon element n Red, orange, green, amber and white colors n Center detent option n Assortment of resistance tapers n Various travel lengths n Various lever sizes PT Series Slide
More informationCeramic PTC Thermistor: PT Series
Sensor Features. RoHS compliant 2. Small size 3. Very fast reaction time 4. Wide range of protection temperatures 5. Stable over a long life 6. Operating temperature range: 0 ~ Ts+25 C (V=Vmax) 7. Agency
More information50 W Power Resistor, Thick Film Technology, TO-220
50 W Power Resistor, Thick Film Technology, TO-220 DESIGN SUPPORT TOOLS click logo to get started FEATURES 50 W at 25 C heatsink mounted Adjusted by sand trimming Leaded or surface mount versions High
More informationSULFURATION-RESISTANT CHIP RESISTOR
FEATURES ROHS ith good sulfuration-resistant performance Miniature and light weight. Suit for reflow and wave flow solder. Stable electrical capability, high reliability. Low assembly cost, suit for automatic
More informationAll part numbers in the coding below start with "TC-" and end with "203"
1. Scope: This specification for approval relates to 2. Type designation: The type designation shall be in the following form : All part numbers in the coding below start with "TC-" and end with "203"
More informationSurface Mount Multilayer Ceramic Capacitors for Pulse Current Applications
Surface Mount Multilayer Ceramic Capacitors for Pulse Current Applications ELECTRICAL SPECIFICATIONS Note Electrical characteristics at +25 C unless otherwise specified FEATURES Low electrostrictive ceramic
More informationWLPM Series SMD Molded Power Inductors
WLPM25212 Series SMD Molded Power Inductors *Contents in this sheet are subject to change without prior notice. Page 1 of 1 ASC_WLPM25212 Series_V4. Jun. 217 Features 1. Shielded construction. 2. Ultra
More informationCPTC Thermistor:PT Series
Sensor Features 1. RoHS compliant 2. Small size 3. Very fast reaction time 4. Wide range of protection temperatures 5. No need reset supply after protection 6. Stable over along life 7. Operating temperature
More informationCONTENT (MLCC) E STANDARD NUMBER... 3 STRUCTURE... 4 ORDERING CODE... 4 GENERAL PURPOSE FOR SMARTPHONE... 5
MLCC MLCC CONTENT (MLCC) E STANDARD NUMBER... 3 STRUCTURE... 4 ORDERING CODE... 4 GENERAL PURPOSE FOR SMARTPHONE... 5 CLASS II: HIGH DIELECTRIC CONSTANT TYPE... 6 X5R Series... 6 TEST SPEC.... 7 PACKAGE...
More informationMetal Oxide Varistor:TVM-G Series
Features 1. RoHS compliant 2. Low clamping voltage 3. EIA size 0402, 0603, 0805 4. Working voltage: 5.5 ~ 30 Vdc 5. Bidirectional and symmetrical V/I characteristics 6. Multilayer ceramic construction
More informationPOE INTERNATIONAL CORPORATION. SPECIFICATION OF MULTI-LAYER RADIAL-LEADED TYPE CAPACITOR Ver: 8 Page: 1
SPECIFICATION OF MULTI-LAYER RADIAL-LEADED TYPE CAPACITOR Ver: 8 Page:. Scope: Its specification applies to Radial Series Ceramic Capacitor. 2.How to order: CODE: U RD2 R 02 K T Rated Voltage Code:U =
More informationAT Series. High Temperature MLCC 200ºC & 250 C Rated HOW TO ORDER ELECTRICAL SPECIFICATIONS DIMENSIONS AT10
Present military specifications, as well as a majority of commercial applications, require a maximum operating temperature of 25 C. However, the emerging market for high temperature electronics demands
More informationDATA SHEET ARRAY CHIP RESISTORS YC/TC 164 (8Pin/4R; Pb Free) 5%, 1% sizes
DATA SHEET ARRAY CHIP RESISTORS 164 (Pin/4R; Pb Free) 5%, 1% sizes 4 0603 Supersedes Date of Mar. 06, 2003 2 SCOPE This specification describes YC164 (convex) and TC164 (concave) series chip resistor arrays
More informationNP0 Dielectric Non-Magnetic Multilayer Ceramic Capacitors C 0603 CG 101 J 500 P
EIA High Non-Magnetic Multilayer Ceramic Capacitors NP0 Dielectric Non-Magnetic Multilayer Ceramic Capacitors Product Features Non-Magnetism, Suitable for MRI Part Numbering C 0603 CG 101 J 500 P T 1 2
More informationLead-Free Current Sensing Resistors RLS Series ( Halogen-Free )
page 1/8 1. Scope: This specification applied to the products of Lead-Free current sensing resistor of metal foil for Lead-Free RLS series manufactured by TA-I TECHNOLOGY CO.,LTD. 2. Type Designation:
More informationMULTILAYER CERAMIC CAPACITORS Capacitor Arrays Series (10V to 100V) 4 x 0402, 4 x 0603 Sizes NP0, X7R & Y5V Dielectrics Halogen Free & RoHS Compliance
MULTILAYER CERAMIC CAPACITORS Capacitor Arrays Series (10V to 100V) 4 x 0402, 4 x 0603 Sizes NP0, X7R & Y5V Dielectrics Halogen Free & RoHS Compliance *Contents in this sheet are subject to change without
More informationIMPROVED PRODUCT Note 1. Tighter performances are available. SMR1DZ/SMR3DZ (Z-Foil)
Ultra High Precision Z-Foil Molded Surface Mount Resistor with TCR down to ± 0.05 ppm/ C, PCR of ± 5 ppm at Rated Power, Flexible Terminations, and Load Life Stability of ± 0.005 % (50 ppm) Any value at
More informationPower Resistors, for Mounting onto a Heatsink Thick Film Technology
RCH Manufactured in cermet thick fi lm technology, these power resistors exhibit remarkable characteristics and the series includes 4 types ranging from 5 W to 50 W Designed to be mounted onto a heatsink,
More informationISA-PLAN // Precision resistors. SMS // Size Features
Features 5 W power rating at 70 C Constant current up to 25 A (5 mohm) excellent long-term stability High pulse power rating Mounting: Reflow-, and IR-soldering AEC-Q200 qualified rohs 20/65/EU compliant
More informationPMLCAP. Polymer Multi Layer Capacitor Specification Sheet RUBYCON CORPORATION PML DIVISION. PMLCAP ST series RPR Rubycon PART No. Drawing No.
To Polymer Multi Layer Capacitor Specification Sheet Rubycon PART No. ST series Drawing No. RPR-0024 Issued Date October 15, 2008 PML DIVISION 2932, MOTOOSHIMA, MATSUKAWA-MACHI, SHIMOINA-GUN, NAGANO-KEN,
More information594D 477 X0 004 R 2 T TYPE CAPACITANCE CAPACITANCE TOLERANCE DC VOLTAGE RATING AT + 85 C
TANTAMOUNT Conformal Coated, PERFORMANCE/ELECTRICAL CHARACTERISTICS Operating Temperature: - 55 C to + 85 C. (To + 125 C with voltage derating.) Capacitance Range: 1.0 µf to 1500 µf Capacitance Tolerance:
More informationShielded Power Inductors TL- 4020SG Series (4.0 x 4.0 x 2.1mm)
Shielded Power Inductors TL- 42SG Series (4. x 4. x 2.1mm) FEATURES Low DCR and excellent current handling 4. x 4. mm footprint; 2.1 mm maximum height Operating temperature range: 4 C to +125 C with Irms
More informationMULTILAYER CERAMIC CAPACITORS Open-Mode Series (50V to 630V) 0805 to 1812 Sizes X7R Dielectric Halogen Free & RoHS Compliance
MULTILAYER CERAMIC CAPACITORS Open-Mode Series (50V to 630V) 0805 to 1812 Sizes X7R Dielectric Halogen Free & RoHS Compliance *Contents in this sheet are subject to change without prior notice. Page 1
More informationCHIP RESISTOR. Chip Resistors Selection Guide. General Purpose Chip Resistor. Zero Ohm Jumper Resistor. Chip Resistor Array MAX WORKING VOLTAGE
Chip Resistors Selection Guide General Purpose Chip Resistor SIZE/ mm POWER RATING MAX WORKING VOLTAGE TOLERANCE RESISTANCE RANGE 0402 1.00*0.50 0603 1.60*0.80 1/10W 0. 0805 2.00*1.25 1/8W 1 0. 1206 3.10*1.60
More informationResistance (R 25) Ω Ω Ω. Tolerance of R 25 M ±20% H ±25% S ±35%
Features 1. RoHS & Halogen-free compliant 2. EIA size 63,85,121 3. Suitable for reflow soldering 4. Suitable for over-current or short circuit protection 5. Agency Recognition: UL&cUL:File No.E138827 TUV:File
More informationSolid Tantalum Chip Capacitors TANTAMOUNT, Low Profile, Conformal Coated, Maximum CV
Solid Tantalum Chip Capacitors TANTAMOUNT, Low Profile, Conformal Coated, Maximum CV FEATURES New case size offerings. 2mm height Terminations: Tin (2) standard. Low ESR 8mm, 12mm tape and reel packaging
More informationApplications. Capacitance Tolerance G = ±2% J = ±5%
Surface Mount Metallized PPS Film Capacitor LDB, Unencapsulated Stacked Chip, Size 1206 1812, 16 and 50 VDC Overview Polyphenylene sulphide (PPS) film capacitor for surface mounting. Applications Typical
More informationULTRA-SLIM POLARIZED RELAY. Initial breakdown voltage* 2. Unit weight. Ex. TN 2 L2 H 12V
TN ULTR-SLIM POLRIZED RELY TN-RELYS 4....8.8 SPEIFITIONS ontact rrangement Initial contact resistance max. (y voltage drop ) ontact material Rating power UL/S rating Expected life (min. operations) switching
More informationSurface Mount Power Resistor Thick Film Technology
Surface Mount Power Resistor Thick Film Technology DESIGN SUPPORT TOOLS click logo to get started Models Available FEATURES AEC-Q200 qualified 35 W at 25 C case temperature Surface mounted resistor - TO-263
More information