Electrical Specifications

Transcription

1 Features: Lower-cost alternative to carbon comps and wirewounds Coating meets UL 94V-0 Meets solvent test of Mil Standard 202, Method 25 Cut and formed product is available on select sizes; contact factory for details Higher or lower resistance values may be possible; contact factory Flameproof RoHS compliant / lead-free Power Rating Maximum Maximum Dielectric Resistance Type / Code (Watts) Working Overload Withstanding Temperature Ohmic Range (Ω) and 70ºC Voltage () Voltage Voltage Coefficient % 2% 5% RSF2 0.5W 250V V 350V ±200 ppm/ºc K K 0. - M RSF W 350V 600V 600V ±200 ppm/ºc K 0. - M RSF2 2W 350V 600V 600V ±200 ppm/ºc K 0. - M RSF3 3W 800V V 750V ±200 ppm/ºc K 0. - K 0. - M RSF5 5W V V 750V ±200 ppm/ºc K 0. - K 0. - M 0.5W 250V V 350V ±200 ppm/ºc K K K RSMF W 350V 600V 500V ±200 ppm/ºc K K 2W 350V 600V 500V ±200 ppm/ºc K K 3W 500V 800V 600V ±200 ppm/ºc K K K RSMF5 5W V V 750V ±200 ppm/ºc K 0. - K 0. - M () Lesser of PR or maximum working voltage Power Derating Curve: Electrical Specifications -55ºC 70ºC 00 Percent Rated Power (%) RSF2, RSMF RSF, RSF2, RSF3, RSF5,, RSMF Ambient Temperature (ºC) Rev Date: 0/2/207

2 Performance Characteristics Test Test Method Test Specification Typical Results Insulation Resistance JIS C520-, IEC605-, 4.6 GΩ GΩ Voltage Proof JIS C520-, IEC605-, 4.7 ± (0.5% Ω) No mechanical damage. <± 0.25% Short Time Overload JIS C520-, IEC605-, 4.3 ± (0.75% Ω) <± 0.% Resistance to Solder Heat JIS C520-, IEC605-, 4.8 ± (2.0% Ω) <±.0% Endurance at 70 C JIS C520-, IEC605-, ± (5.0% Ω) <± 2.0% Robustness of Terminations JIS C520-, IEC605-, 4.6 ± (.0% Ω) <± 0.0% Damp Heat (Steady state) JIS C520-, IEC605-, 4.24 ± (5% Ω) <±.5% Rapid Change of Temperature JIS C520-, IEC605-, 4.9 ± (% Ω) <± 0.2% Resistance to Solvents JIS C520-, IEC605-, 4.29 No damage to component or removal of marking. Pass Intermittent Overload JIS C520-, IEC605-, 4.39 ± (2% Ω) <± 0.3% Accidental Overload (Flame resistance) JIS C520-, IEC605-, 4.26 No flaming of gauze. Pass Operating Temperature Range: -55ºC to +200ºC (RSF2,, RSMF) -55ºC to +235ºC (All others) Mechanical Specifications Type / Code RSF2 RSF RSF2 RSF3 RSF5 RSMF RSMF5 A B C D Lead-Tape Body Length Body Diameter Lead Length (Bulk) Lead Diameter Specification Unit 0.35 ± ± ± ± inches 9.00 ± ± ± ± mm 0.43 ± ± ± ± inches.00 ± ± ± ± mm 0.59 ± ± ± ± inches 5.00 ± ± ± ± mm 0.69 ± ± ± ± inches 7.50 ± ± ± ± mm 0.96 ± ± ± ± inches ± ± ± ± mm 0.24 ± ± ± ± inches 6.00 ± ± ± ± mm 0.35 ± ± ± ± inches 9.00 ± ± ± ± mm 0.43 ± ± ± ± inches.00 ± ± ± ± mm 0.59 ± ± ± ± inches 5.00 ± ± ± ± mm 0.69 ± ± ± ± inches 7.50 ± ± ± ± mm Rev Date: 0/2/

3 Packaging Specifications Reeled in accordance with EIA-296-F z Series Code A max.() B max C D (2) Tape Unit RSF RSMF ± ± inches ± ± mm ± ± inches ± ± mm ± ± inches ± ± mm ± ± inches ± ± mm ± ± inches ± ± mm ± ± inches ± ± mm ± ± inches ± ± mm ± ± inches ± ± mm ± ± inches ± ± mm ± ± inches ± ± mm Dimension "E": This is a non-critical dimension that does not have a tolerance in the standard. Range of diameters is from inches (3.90 mm) to.500 inches (38.0 mm). () Reference value only. The "A" dimension shall be governed by the overall length of the taped component. The distance between flanges shall be inches (.50 mm) to 0.35 (8.00 mm) greater than the overall component. (2) The given dimension "D" expresses the standard width spacing. A 26mm narrow spacing is available as option "N" packaging code. Rev Date: 0/2/

4 Pulse Limiting Power (one pulse) / RSMF Series 5Ω 0,000 Pulse Power (Watts) 00 0,300 25,300 25, RSMF μ 0μ 00μ m 0m 00m Pulse Width (sec.) Pulse Limiting Power (one pulse) / RSMF Series 5Ω 0,000 Pulse Power (Watts) 00 0,500,500, RSMF μ 0μ 00μ m 0m 00m Pulse Width (sec.) RoHS Compliance Stackpole Electronics has joined the worldwide effort to reduce the amount of lead in electronic components and to meet the various regulatory requirements now prevalent, such as the European Union s directive regarding Restrictions on Hazardous Substances (RoHS 2). As part of this ongoing program, we periodically update this document with the status regarding the availability of our compliant components. All our standard part numbers are compliant to EU Directive 20/65/EU of the European Parliament. RoHS Compliance Status Standard Product Series Description Package / Termination Type Standard Series RoHS Compliant Lead-Free Termination Composition Lead-Free Mfg. Effective Date (Std Product Series) Lead-Free Effective Date Code (YY/WW) RSF General Purpose Metal Oxide Leaded Resistor Axial YES 99.3/0.7 Sn/Cu 00% Matte Sn Apr-05 (Japan) Jan-04 (Taiwan, China) 05/4 04/0 RSMF Mini-Metal Oxide Leaded Resistor Axial YES 99.3/0.7 Sn/Cu 00% Matte Sn Apr-05 (Japan) Jan-04 (Taiwan, China) 05/4 04/0 Rev Date: 0/2/

5 Conflict Metals Commitment We at are joined with our industry in opposing the use of metals mined in the conflict region of the Eastern Democratic Republic of the Congo (DRC) in our products. Recognizing that the supply chain for metals used in the electronics industry is very complex, we work closely with our own suppliers to verify to the extent possible that the materials and products we supply do not contain metals sourced from this conflict region. As such, we are in compliance with the requirements of Dodd-Frank Act regarding Conflict Minerals. Compliance to REACH We certify that all passive components supplied by are SVHC (Substances of Very High Concern) free and compliant with the requirements of EU Directive 907/2006/EC, The Registration, Evaluation, Authorization and Restriction of Chemicals, otherwise referred to as REACH. Contact us for complete list of REACH Substance Candidate List. Environmental Policy It is the policy of (SEI) to protect the environment in all localities in which we operate. We continually strive to improve our effect on the environment. We observe all applicable laws and regulations regarding the protection of our environment and all requests related to the environment to which we have agreed. We are committed to the prevention of all forms of pollution. How to Order R S F 2 J T R Product Series Size Power Tolerance Packaging RSF Metal Oxide 2 0.5W Code Tol Value Code Description Size Quantity RSMF Mini W F % E96 5,000 PRSF () Panasert 2 2W G 2% RSF2, RSF E24 2,500 PRSM () Panasert Mini 3 3W J 5% RSMF, T Tape and Reel 5 5W PRSM2 2,000 RSF2, RSF3, RSMF5 () For packaging information see Radial Leaded Packaging Spec page T Tape and Reel RSF5 RSF2; RSMF 500 (*) 5,000 2,000 A Ammo RSF, RSF2,, PRSM2, RSF3, RSF5, RSMF5 500 (*) B Bulk All Sizes (*) pieces MOQ Resistance Value Four characters with the multiplier used as the decimal holder ohm = R ohm = 33R2 0.2 Kohm = 0K2 Mohm = M00 Rev Date: 0/2/