Bourns Multifuse Resettable Fuses - Polymer PTC & Ceramic PTC Short Form Catalog
|
|
- Elwin Jackson
- 6 years ago
- Views:
Transcription
1 ourns Multifuse Resettable Fuses - Polymer PT & eramic PT hort Form atalog
2 ourns Multifuse Products ourns Multifuse family of Polymer Positive Temperature oefficient (PPT) resettable fuses are used in a wide variety of circuit protection applications. Under fault conditions the device resistance will rise exponentially and remain in a tripped state, providing continuous circuit protection until the fault is removed. Once the fault is removed and the power cycled, the device will return to its normal low resistance state. What s New in this Edition MF-PMF eries 080 surface mount products MF-RHT eries high temperature radial through-hole products MF-M0/0V telecom vertical surface mount products Expanded MF-NMF eries 06 surface mount products MF-RG eries automotive radial throughhole products MF-RX/7 eries 7V radial through-hole products MF eries ceramic products ee lso Multifuse automotive short form catalog ircuit protection selection guide for dedicated Multifuse telecom products Features/enefits Resettable overcurrent protection Heat element gency approvals - UL,, TÜV tandard footprints and packaging options Low resistance RoH compliance standard ustom designs available pplications omputer attery utomotive Telecommunications Industrial onsumer
3 Multifuse Products How They Work rystalline Polymer morphous Polymer onducting arbon hains Non-conducting arbon hains cold hot Resettable fuses are manufactured in the form of a conductive plastic, which is comprised of a nonconductive crystalline polymer with highly conductive carbon black particles impregnated throughout the crystal lattice. ecause of the close proximity of the carbon black particles within the crystal lattice, under normal conditions current is allowed to flow easily through the conductive plastic. However under a fault condition, when there is an increase in current, the conductive plastic heats at the rate of I R. s the material continues to heat, it eventually reaches the phase transformation temperature, which changes the crystal structure into an amorphous structure. Once the material has transformed into this amorphous structure, the conductive particles become isolated and are unable to conduct current hence the drastic change in material resistance. It is only when the current is removed that the material is allowed to cool and return to its original crystal structure. Multifuse Products How They re Used I=V/R MF I R MF Log I=V/R L Temperature V +t R L PT Response haracteristic It is the materials used in resettable fuses that allow them to reset after a fault condition has been removed. Resettable fuses exhibit a positive temperature coefficient effect when heated. While many materials exhibit a PT effect when heated (an increase in resistance in response to a positive change in temperature), what makes the material used in resettable fuses unique is the fact that the increase in resistance changes exponentially rather than in a linear manner. Typical ircuit pplication It is because of this transformation from a low resistance state to a high resistance state that allows the resettable fuse to protect loads. It is this transition from the low resistance state to high resistance state that is referred to as tripping. The time it takes for a resettable fuse to trip is relatively quick, depending on how high the fault current is and it can be as quick as a fraction of a second. Hence they are an excellent form of protection for most applications where sensitive devices need extra protection.
4 Low Voltage Products MF-R eries mps Hold urrent Hour (R ) mperes Ohms at at mps Min. Max. Max. Max. Nom. MF-R MF-R MF-R MF-R MF-R MF-R MF-R MF-R MF-R MF-R MF-R MF-R MF-R MF-R MF-R MF-R MF-R MF-R MF-R MF-R MF-R MF-R MF-R MF-R MF-R MF-R MF-RG eries 6 V mperes at mps Hour (R ) MF- RG MF- RG (0.) (0.7) (0.0) (0.9) (0.00) (0.0) (0.9) (0.00) (0.0) (0.9) (0.00) (0.0) (0.9) (0.00) (0.0) 7... (0.9) (0.8) (0.0) (0.9) (0.9) (0.0) (0.) (0.9) (0.0) (0.8) (0.98) (0.0) (0.09) (0.60) (0.0) (0.6) (0.67) (0.0) 7... (0.9) (0.80) (0.0) (0.0) (0.) (0.0) (0.0) (0.7) (0.0) (0.0) (0.66) (0.0) (0.7) (0.7) (0.0) (0.7) (0.70) (0.0) (0.7) (0.70) (0.0) (0.7) (0.70) (0.0)..8. (0.67) (0.976) (0.0) (0.68) (0.980) (0.0) (0.760) (.6) (0.0) (0.870) (.7) (0.0) (0.9) (.9) (0.0) (0.9) (.9) (0.0) (0.9) (.9) (0.0) Operating Temperature -0 ~ +8 Ohms at Min. Max. Max. Max. Max ±0.7 (0.8) 0. (0.) (0.). (0.6) (0.0 ±0.08). ±0.7 (0.0 ±0.08) MF-RX eries* Features ulk and Tape and Reel Packaging Industry tandard izes pplications omputers and Peripherals General Electronics utomotive onsumer ppliances Electronic Toys mperes at mps MF-RHT eries Operating Temperature High Temperature -0 ~ + Hour (R ) mperes Ohms at at mps Min. Max. Max. Max. Nom. MF-RHT MF-RHT MF-RHT MF-RHT MF-RHT MF-RHT mps Hold urrent Hour (R ) MF-RX MF-RX MF-RX MF-RX MF-RX MF-RX MF-RX Ohms at Min. Max. Max. Max. Nom (0.). (0.7) 6. (0.6) 7.8 (0.70). (0.89).9 (0.980) 8. (.8) *Not recommended for new designs, suggest using new MF-RX/7 eries MF-RX/7 eries mperes at mps (0.709) 9.6 (0.77). (0.89).9 (0.90) 6. (.09) 0.0 (.8). (.9) (0.0). (0.0). (0.0). (0.0) 0. (0.0) 0. (0.0) 0. (0.0) (0.7) (0.) (0.0) (0.7) (0.) (0.0) (0.) (0.6) (0.0).7.. (0.) (0.88) (0.0).0.. (0.) (0.9) (0.0) (0.9) (.7) (0.0) mps Hold urrent Hour (R ) MF-RX00/ MF-RX0/ MF-RX00/ MF-RX00/ MF-RX00/ MF-RX06/ MF-RX07/ MF-RX090/ MF-RX0/ MF-RX/ MF-RX60/ MF-RX8/ MF-RX0/ MF-RX00/ MF-RX7/ Ohms at Min. Max. Max. Max. Nom (0.9) 7. (0.9) 7. (0.9) 7. (0.9) 7.9 (0.) 9.7 (0.8) 0. (0.09).7 (0.6) 0.8 (0.7).6 (0.8).9 (0.9).8 (0.98) 7.8 (0.70) 0.67 (0.8). (0.96) (0.00).7 (0.00). (0.8).7 (0.9).7 (0.9). (0.98) 6.0 (0.60) 6.7 (0.67) 6.8 (0.66) 8.6 (0.78) 9.9 (0.78).8 (0.8).8 (0.98) 6.67 (.00) 9. (.6) (0.0). (0.0). (0.0). (0.0). (0.0). (0.0). (0.0). (0.0). (0.0). (0.0). (0.0). (0.0) 0. (0.0) 0. (0.0) 0. (0.0)
5 urface Mount Low Voltage Products ide View End View Top and ottom View ide View Features Tape and Reel Packaging Industry tandard izes pplications omputers and Peripherals General Electronics utomotive MF-M eries (90 package) urface Mount (7 mm) MF-M eries ( package) urface Mount (876 mm) mps Hold urrent Hour (R ) mperes Ohms at at mps Min. Max. Max. Max. Nom. MF-M MF-M0/ MF-M8/ MF-M MF-M mps Hold urrent Hour (R ) mperes Ohms at at mps Min. Max. Max. Max. Nom. MF-M MF-M MF-M MF-M07/ MF-M MF-M00/ MF-M MF-M MF-M (0.) (0.) (0.) (0.) (0.) (0.) (0.) (0.) (0.) (0.) (0.) (0.) (0.) (0.8) (0.) (0.) (0.8) (0.) (0.) (0.8) (0.) (0.) (0.8) (0.) (0.) (0.8) (0.) (0.7) (0.8) (0.6) (0.7) (0.8) (0.6) (0.7) (0.8) (0.6) (0.7) (0.8) (0.6) (0.7) (0.8) (0.6) MF-NMF eries (06 package) 6-0 urface Mount (6 mm) mps Hold urrent mperes at mps MF-MMF eries (8 package) urface Mount ( mm) Hour (R ) MF-NMF MF-NMF MF-NMF MF-NMF MF-NMF MF-NMF MF-NMF MF-NMF mps Hold urrent Hour (R ) mperes Ohms at at mps Min. Max. Max. Max. Max. MF-MMF MF-MMF MF-MMF MF-MMF00/ MF-MMF MF-MMF MF-MMF MF-MMF07/ MF-MMF MF-MMF0/ MF-MMF MF-MMF MF-MMF0/ MF-MMF MF-MMF MF-MMF0/ MF-MMF Ohms at Min. Max. Max. Max. Max...8. (0.). (0.). (0.). (0.). (0.). (0.). (0.). (0.8) (0.07).8 (0.07).8 (0.07).8 (0.07).8 (0.07).8 (0.07).8 (0.07).8 (0.07) (0.0) (0.08) 0.7 (0.08) 0.7 (0.08).6 (0.06).7..0 (0.86) (0.) (0.0).7..0 (0.86) (0.) (0.0).7..0 (0.86) (0.) (0.0).7..0 (0.86) (0.) (0.0).7..0 (0.86) (0.) (0.0) (0.86) (0.) (0.86) (0.) (0.86) (0.) (0.86) (0.) (0.86) (0.) (0.86) (0.) (0.86) (0.) (0.86) (0.) (0.86) (0.) (0.86) (0.) (0.86) (0.) (0.078) (0.86) (0.)
6 urface Mount Low Voltage Products (ontinued) MF-MDF eries (08 package) 0-60 urface Mount (00 mm) mps Hold urrent Hour (R ) mperes Ohms at at mps Min. Max. Max. Max. Max. MF-MDF MF-MDF MF-MDF MF-MHT eries 6 urface Mount/High mps Hold urrent Temperature (Working temp: -0 ~ + ) Hour (R ) mperes Ohms at at mps Min. Max. Max. Max. Max. MF-MHT MF-MHT (0.) (0.9) (0.0) (0.) (0.9) (0.) (0.9) (0.) (0.8) (0.) (0.7) (0.8) (0.6) MF-PMF eries (080 package) 6-9 urface Mount (00 mm) mps Hold urrent mperes at mps Hour (R ) MF-PMF00X MF-PMF0X MF-PMF00X MF-PMF07X MF-PMF0X Ohms at Min. Max. Max. Max. Max.. (0.09). (0.09). (0.09). (0.09). (0.09). (0.09). (0.09). (0.09). (0.09). (0.09) (0.09). (0.09) MF-UMF eries (0 package) 6-0 urface Mount ( mm) mps Hold urrent mperes at mps Hour (R ) MF-UMF MF-UMF MF-UMF MF-UMF MF-UMF MF-UMF MF-UMF MF-UMF MF-UMF Ohms at Min. Max. Max. Max. Max...8. (0.). (0.). (0.). (0.). (0.). (0.). (0.). (0.). (0.) (0.).8 (0.).8 (0.).8 (0.).8 (0.).8 (0.).8 (0.).8 (0.).8 (0.) (0.0). (0.0). (0.0)
7 trap Products tandard "" 0..0 LIT X NOMINL (.00) (.7) "RU" Features xial/ Weldable Nickel Terminal Very Low Internal pplications Rechargeable attery Packs for ellular Phones & Laptop omputers MF-V eries (Lowest vailable ) 0 xial Leaded trap.7-. mps Hold urrent Hour (R ) mperes Ohms at at mps Min. Max. Max. Max. Max. MF-V MF-V70N MF-V MF-V7N MF-V7NL MF-V MF-V0N MF-V MF-V0N (0.709) (0.6) (0.0) (0.9) (0.) (0.0) (0.709) (0.6) (0.0) (0.9) (0.) (0.0) (.0) (0.) (0.0) (0.909) (0.6) (0.0) (.60) (0.) (0.0) (0.909) (0.6) (0.0) (.60) (0.) (0.0) MF-V eries (Low & Low Temp.) 6 xial Leaded trap.7-. mps Hold urrent Hour (R ) mperes Ohms at at mps Min. Max. Max. Max. Max. MF-V MF-V MF-V MF-V0L MF-V (0.709) (0.7) (0.0) (0.709) (0.7) (0.0) (0.909) (0.7) (0.0) (.0) (0.7) (0.0) (0.909) (0.7) (0.0) MF-V Narrow ody eries (Low Narrow) xial Leaded trap.7-. mps Hold urrent Hour (R ) mperes Ohms at at mps Min. Max. Max. Max. Max. MF-V70N MF-V7NL MF-V0N MF-LR eries (Low ) xial Leaded trap (0.9) (0.) (0.0) (.0) (0.) (0.0) (.60) (0.) (0.0) mps Hold urrent Hour (R ) mperes Ohms at at mps Min. Max. Max. Max. Max. MF-LR MF-LR MF-LR MF-LR MF-LR MF-LR MF-LR MF-LR MF-LR MF-LR70/ MF-LR900/ (0.870) (0.0) (0.09)...0 (0.870) (0.0) (0.09)...0 (0.909) (0.0) (0.09)...0 (0.909) (0.0) (0.09) (.0) (0.9) (0.09) (.0) (0.) (0.09) (.7) (0.9) (0.09) (.0) (0.66) (0.09) 0.0 (.8) (0.90) (0.09) (.6) (0.7) (0.09) (.87) (0.) (0.0) 7
8 trap Products (ontinued) MF-L eries (Lower Trip Temperature) - xial Leaded trap.0-. mps Hold urrent MF- eries (tandard) xial Leaded trap mps Hold urrent Hour (R ) mperes Ohms at at mps Min. Max. Max. Max. Max. MF-L MF-L MF-L80L MF-L MF-L MF-L90RU MF-L MF-L MF-L (0.909) (0.0) (0.09) (.0) (0.0) (0.09) (.8) (0.) (0.09) (.0) (0.0) (0.09)..0. (0.9) (0.) (0.0) (0.89) (0.6) (0.00) RU (.0) (0.69) (0.09).8.. (.) (0.) (0.0) (.0) (0.66) (0.09) Hour (R ) mperes Ohms at at mps Min. Max. Max. Max. Max. MF MF MF MF MF MF MF MF (0.870) (0.0) (0.09)...0 (0.870) (0.0) (0.09)..0. (0.9) (0.) (0.0)...0 (0.909) (0.0) (0.09)...0 (0.909) (0.0) (0.09)..0. (0.9) (0.) (0.0).8.. (.) (0.) (0.0)..6. (.76) (0.) (0.0) Disk & hip Type PT Products MF-D eries* Disk onfiguration mperes at mps. -. mps Hold urrent Hour (R ) MF-D MF-D MF-D MF-D *For ordering information, contact your ourns representative. Ohms at Min. Max. Max. Max. Max (0.67) 6. (0.66) 6.08 (0.6). (0.9) (0.8) 0.0 (0.9) (0.) (0.0) 0.6 (0.0) 0.6 (0.0) 0.6 (0.0) Features ustom designs to meet appropriate applications ompatible with current industry standards Overcurrent and overtemperature protection tandard and low-temperature material Patents pending pplications Lithium cells attery cells Powered toys Motors 8
9 Telecom Products Features Designed to Withstand Lightning urge Designed to Withstand Power ross vailable in Matched ins pplications PE and entral Office ccess Equipment Hybrid-Fiber oax MF-R/90 eries mps Hold urrent Hour (R ) mperes Ohms at at mps Min. Max. Max. Max. Nom. MF-R0/ MF-R0/90U MF-R07/ MF-RX/0 eries (Fast Trip, mall Package) (0.) (0.6) (0.0) (0.) (0.6) (0.0).9.. (0.7) (0.6) (0.0) 60 0 Vrms short duration interrupt mps Hold urrent Hour (R ) mperes Ohms at at mps Min. Max. Max. Max. Max. MF-RX0/ MF-RX0/ MF-RX0/ MF-RX0/0-F MF-RX0/ MF-RX0/ MF-RX0/0-T MF-RX0/0U MF-RX0/ MF-RX0/ MF-RX0/ MF-RX0/0-T MF-RX0/0U MF-RX08/ MF-RX08/0U (0.6) (0.) (0.0) (0.6) (0.) (0.0) (0.6) (0.) (0.0) (0.6) (0.) (0.0) (0.6) (0.) (0.0) (0.6) (0.) (0.0) (0.6) (0.) (0.0) (0.6) (0.9) (0.0) (0.6) (0.) (0.0) (0.6) (0.) (0.0) (0.6) (0.) (0.0) (0.6) (0.) (0.0) (0.6) (0.9) (0.0).0.6. (0.) (0.) (0.0) (0.09) (0.96) (0.0) MF-R/600 eries Vrms short duration interrupt mps Hold urrent Hour (R ) mperes Ohms at at mps Min. Max. Max. Max. Max. MF-R0/ MF-R0/ MF-R0/ MF-R0/600-F MF-R06/ MF-R06/ MF-R06/ MF-M0/0 eries urface Mount (0.) (0.96) (0.6) (0.) (0.96) (0.6) (0.) (0.96) (0.6) (0.) (0.96) (0.6) (0.69) (0.96) (0.6) (0.69) (0.96) (0.6) (0.69) (0.96) (0.6) 60 0 Vrms short duration interrupt 0. mps Hold urrent Hour (R ) mperes Ohms at at mps Min. Max. Max. Max. Max. MF-M0/ MF-M0/ MF-M0/ MF-M0/ MF-M0/0V eries urface Mount mperes at mps (0.70) (0.6) (0.9) (0.70) (0.6) (0.9) (0.70) (0.6) (0.9) (0.70) (0.6) (0.9) 60 0 Vrms short duration interrupt 0. mps Hold urrent Hour (R ) MF-M0/0V Ohms at Min. Max. Max. Max. Max. 6.6 (0.60) 7. (0.9). (0.6) 9
10 eramic PT Products Features eramic PTs for telecom overcurrent protection Wide range of form factors for most applications ids telecom compliance with: - ITU-T K.0// - Telcordia GR-089-ORE - UL 6090, rd Ed. Narrow and matched resistance tolerances 6 pplications Used as secondary overcurrent protection devices in: ustomer Premise Equipment (PE) entral Office Equipment (O) ccess Equipment MF-RL eries Induction Voltage Withstand V 0 ±0. Ohms Packaging Matching Rated (RN) Hold urrent mps at Trip urrent mps at Ohms Tolerance Max. Max. Nom. MF-RL ±0 % (0.7). (0.77). (0.) MF-RL ±0 % (0.7). (0.77). (0.) MF-RLU 60 ±0 % (0.0). (0.8). (0.0) MF-RL 60 ±0 % (0.86).0 (0.97). (0.) MF-RL-0 60 ±0 % (0.86).0 (0.97). (0.) MF-RL 60 ±0 % (0.9).6 (0.0).0 (0.) MF-RL-0 60 ±0 % (0.9).6 (0.0).0 (0.) MF-RL ±0 % (0.86).0 (0.97). (0.) MF-RL ±0 % (0.86).0 (0.97). (0.) MF-RL ±0 % (0.9).6 (0.0).0 (0.) MF-RL ±0 % (0.9).6 (0.0).0 (0.) MF-RL 60 ±0 % (0.86).0 (0.97). (0.) MF-RL-0 60 ±0 % (0.86).0 (0.97). (0.) MF-RL 60 ±0 % (0.9).6 (0.0).0 (0.) MF-RL-0 60 ±0 % (0.9).6 (0.0).0 (0.) MF-RL eries Through-hole/eramic ase Induction Voltage Withstand V Rated (RN) Hold urrent mps at Trip urrent mps at eramic Housing ±0. Ohms Packaging Matching Ohms Tolerance Max. Max. Nom. MF-RL ±0 % (0.6).7 (0.8) 9.6 (0.78) MF-RL ±0 % (0.6).7 (0.8) 9.6 (0.78) MF-D eries Twin Pack/MD MF-RD eries Twin Pack/Through-hole Induction Voltage Withstand V Induction Voltage Withstand V Rated (RN) Rated (RN) Hold urrent mps at Hold urrent mps at Trip urrent mps at Trip urrent mps at 0 V Rated ±0. Ohms Matching in Housing Ohms Tolerance Max. Max. Nom. MF-D 600 ±0 % (0.) 0.8 (0.) 0. (0.0) MF-D ±0 % (0.) 0.8 (0.) 0. (0.0) MF-D 600 ±0 % (0.8) 8. (0.) 8. (0.9) MF-D ±0 % (0.8) 8. (0.) 8. (0.9) MF-D 600 ±0 % (0.) 0.8 (0.) 0. (0.0) MF-D ±0 % (0.) 0.8 (0.) 0. (0.0) MF-D 600 ±0 % (0.8) 8. (0.) 8. (0.9) MF-D ±0 % (0.8) 8. (0.) 8. (0.9) MF-D ±0 % (0.) 0.8 (0.) 0. (0.0) MF-D ±0 % (0.) 0.8 (0.) 0. (0.0) MF-D ±0 % (0.8) 8. (0.) 8. (0.9) MF-D ±0 % (0.8) 8. (0.) 8. (0.9) 0 ±0. Ohms Packaging Matching Ohms Tolerance Max. Max. Nom. MF-RD ±0 % (0.) 0. (0.0) 9. (0.6) MF-RD ±0 % (0.) 0. (0.0) 9. (0.6) MF-RQ eries Quad Pack/Through-hole Induction Voltage Withstand V Rated (RN) Hold urrent mps at Four PTs in One Package ±0. Ohms Matching in Housing Trip urrent mps at Ohms Tolerance Max. Max. Nom. MF-RQ ±0 % (0.9).0 (0.86).0 (0.) MF-RQ ±0 % (0.9).0 (0.86).0 (0.) 6 6 0
11 How To Order ourns Multifuse Product Designator eries D = Disk onfiguration LR = xial Leaded trap L = xial Leaded trap MMF = urface Mount NMF = urface Mount PMF = urface Mount R = RG = RHT = High Temp. Radial Mount RX = = xial Leaded trap M = urface Mount MDF = urface Mount MHT = High Temp. urface Mount V = xial Leaded trap UMF = urface Mount V = xial Leaded trap VN = xial Leaded trap Hold urrent, Voltage Options: Max. Interrupt Voltage, V MF - RX 0/0 U onstruction Options: N = Narrow Device Option (.6 mm)* = lotted Lead Option (one side)* = lotted Lead Option (two sides)* U = Uncoated T = Pretripped ** orted** (see individual data sheets) ins of 0. Ω*** 0 = 0. Ω Packaging Options - 0 = ulk Packaging - = Tape and Reel - P = mmo-pak *xial Leaded trap products only. **Telecom products only. *** products only. gency File Numbers UL File Number...E 7 File Number TÜV File Number...R07 Definitions gency pprovals ourns PPTs are certified under UL,, IE and TÜV registration programs. urrent, Hold ( ) The maximum current a PPT device can pass without interruption. urrent, Maximum (I max ) The maximum fault current a PPT device can withstand without damage at the rated voltage. urrent, Trip (I trip ) The minimum current that will switch a PPT from the low resistance to the high resistance state. Fault urrent The peak current that flows through a PPT or wire during a short circuit or arc back. Positive Temperature oefficient (PT) characteristic of the PPT device that describes the large increase in resistance as the device reaches its switching (trip) temperature., Post Trip (R max ) The maximum resistance one hour after a PPT device has been tripped and power has been removed., Post Reflow (R max ) The maximum resistance one hour after a PPT surface mount device has been reflow soldered. Voltage, Maximum (V max ) The maximum voltage a PPT device can withstand without damage at the rated current. Product election Worksheet. What is the normal circuit operating current ( ). What is the maximum circuit voltage (V max ). What is the maximum fault current (I max ). What is the preferred form factor Note: Other factors including thermal derating and time to trip characteristics may be important application considerations. Please refer to the full ourns data sheet of each product at
12 Worldwide ales Offices ountry Phone Fax enelux: + (0) (0) razil: hina: France: + (0) 7 + (0) 7 6 Germany: +9 (0) (0) Ireland/UK: + (0) (0) Italy: + (0) (0) Japan: Malaysia (KL Office): Malaysia (Penang Office): ingapore: witzerland: + (0) (0) Taiwan: UK/Ireland: + (0) (0) U: Non-Listed European ountries: + (0) (0) Technical ssistance Region Phone Fax sia-pacific: Europe: + (0) (0) mericas: ourns products are available through an extensive global network of representatives and distributors. To obtain technical applications assistance, a quotation, or to place an order, contact a ourns representative in your area. pecifications subject to change without notice. ctual performance in specific customer applications may differ due to the influence of other variables. ustomers should verify actual device performance in their specific applications. ircuit Protection olutions ourns and "Multifuse" are registered trademarks of ourns, Inc. in the U.. and other countries. OPYRIGHT 008, OURN, IN. LITHO IN U... WG 0/08 0M/MF07
Bourns Multifuse Resettable Fuses. Polymeric PTC & Ceramic PTC Short Form Brochure
ourns Multifuse Resettable Fuses Polymeric PT & eramic PT Short Form rochure ourns Multifuse Products The ourns Multifuse family of Polymeric Positive Temperature oefficient (PPT) resettable fuses are
More informationMF-MSMF Series - PTC Resettable Fuses
*RoHS OMPLINT & E PPROVED Features ompliant with E-Q00 Rev-- Stress Test Qualification for Passive omponents in utomotive pplications 00 % electrically compatible with all previous generations of 8 SMT
More informationMF-MSMF Series - PTC Resettable Fuses
*RoHS & E OMPLINT Features n ompliant with E-Q00 Rev-- Stress Test Qualification for Passive omponents in utomotive pplications n 00 % electrically compatible with all previous generations of 8 SMT devices
More informationMF-NSMF Series - PTC Resettable Fuses
*RoHS COMPLINT & EC PPROVED Features Compliant with EC-Q00 Rev-C Stress Test Qualification for Passive Components in utomotive pplications Compact design to save board space - 06 footprint Small size results
More informationPRCP-MSMF Series - Polymer Resettable Circuit Protectors
*RoHS COMPLINT & EC PPROVE 9 Features Compliant with EC-Q00 Rev-C- Stress Test Qualification for Passive Components in utomotive pplications 00 % electrically compatible with all previous generations of
More informationMF-NSMF Series - PTC Resettable Fuses
*RoHS and EC-Q00 COMPLINT Features n Compliant with EC-Q00 Rev-C Stress Test Qualification for Passive Components in utomotive pplications n Compact design to save board space - 06 footprint n Small size
More informationMF-MSMF Series - PTC Resettable Fuses
*RoHS and AE-Q00 OMPLIANT Features ompliant with AE-Q00 Rev-- Stress Test Qualification for Passive omponents 00 % electrically compatible with all previous generations of 8 SMT devices ompatible with
More informationPTS Volt DC surface mount resettable PTC devices. Technical Data Applications. Agency information.
Supersedes August 2014 Pb HALOGEN HF FREE Applications USB Peripherals Disk drives Power tools Rechargeable battery pack protection Plug and play protection for motherboards and peripherals Mobile phones
More information30Vdc Series ELECTRICAL CHARACTERISTICS
RLD P UF Series Devices 2009.10.07 The Radial Leaded devices (RLD Series), a polymer-based Positive Temperature Coefficient (PTC) device to protect electrical circuits against over-current conditions with
More informationMF-RM Series - PTC Resettable Fuses
*RoHS COMPLINT & **HLOGN FR Features Radial leaded devices Cured, flame retardant epoxy polymer insulating material meets UL 94V-0 requirements ulk packaging, tape and reel available Resettable circuit
More informationDATA SHEET POSITIVE TEMPERATURE COEFFICIENT AC/DC POWER SUPPLY SMD0603 series
Product specification November 05, 201 V.0 DATA SHEET AC/DC POWER SUPPLY series RoHS compliant & Halogen free 2 Positive Temperature Coefficient (PTC) Data Sheet Description The 0603 series provides miniature
More informationFeatures. Circuit Schematic. Typical Electrical Characteristics. Applications. Surface Mount EMI Filters Three Terminal Chips
Features Excellent performance in high current applications Non-polar, surface mountable Superior filtering characteristics Superb ability to withstand transient voltages and surge Offers exceptional solderability
More informationSS V Subminiature, radial leaded, time-delay fuses
Supersedes August 2013 250 V Subminiature, radial leaded, time-delay fuses Pb HALOGEN HF FREE Product description Radial leaded, time delay with low breaking capacity Designed to IEC60127-3 Sheet 4 Plastic
More informationSFRV Polymer PTC Thermistor SFRV ROHS
Polymer PTC Thermistor ROHS Features High voltage endurance. Designed for telecom applications. Low parasitic capacitance, flat impedance with frequency. RoHS compliant and UL certificate(file No.:E305346).
More informationSymbol Parameter Test Conditions Value Unit Sxx15L T C. = 90 C 15 RMS on-state current Sxx16R = 90 C 9.5 I T(AV) Sxx16R
Sxx15x & Sxx16x Series RoHS Description Excellent unidirectional switches for phase control applications such as heating and motor speed controls. Standard phase control SRs are triggered with few milliamperes
More informationResistance (R 25) Ω Ω Ω. Tolerance of R 25 M ±20% H ±25% S ±35%
Features 1. RoHS & Halogen-free compliant 2. EIA size 63,85,121 3. Suitable for reflow soldering 4. Suitable for over-current or short circuit protection 5. Agency Recognition: UL&cUL:File No.E138827 TUV:File
More informationSymbol Parameter Value Unit RMS on-state current (full sine wave) Qxx35P5 T C. f = 120 Hz T J. 10 μs I GT
Description 30 mp / 35 mp bi-directional solid state switch series is designed for C switching and phase control applications such as motor speed and temperature modulation controls, lighting controls,
More informationFeatures Lead free as standard RoHS compliant* Leadless Low stored charge
*RoHS OMPLINT 6 Features Lead free as standard RoHS compliant* Leadless Low stored charge pplications ellular phones Ps esktop Ps and notebooks igital cameras MP3 players 85-xxxx products are currently
More informationCHIP RESISTOR. Chip Resistors Selection Guide. General Purpose Chip Resistor. Zero Ohm Jumper Resistor. Chip Resistor Array MAX WORKING VOLTAGE
Chip Resistors Selection Guide General Purpose Chip Resistor SIZE/ mm POWER RATING MAX WORKING VOLTAGE TOLERANCE RESISTANCE RANGE 0402 1.00*0.50 0603 1.60*0.80 1/10W 0. 0805 2.00*1.25 1/8W 1 0. 1206 3.10*1.60
More informationDistributed by: www.jameco.com 1-8-831-4242 The content and copyrights of the attached material are the property of its owner. LBA11 Dual Pole OptoMOS Relay Parameter Ratings Units Blocking Voltage 3 V
More informationAVX is a leading worldwide manufacturer and supplier of a broad line of passive electronic components and Interconnects.
Tantalum Capacitors Niobium Oxide Capacitors AVX is a leading worldwide manufacturer and supplier of a broad line of passive electronic components and Interconnects. AVX enjoys significant competitive
More informationATC 900 C Series X7R Ceramic RF Power Multilayer Capacitors
AT 900 Series X7R eramic RF Power Multilayer apacitors ase Size apacitance Range (.250" x.250") 0.01 µf to 1 µf Low ESR/ESL Mid-K Rugged onstruction High Reliability Available with Encapsulation Option*
More informationSPF SERIES SOLAR FUSES
Vdc - A Specifications Voltage Rating VDC Amperage Rating,,,.,,,,, 0,,,,, Max. Interrupting Rating ka - A - A ka - A - A Time Constant ms Material Body: Melamine Caps: Copper Alloy Approvals UL - Listed
More informationPPTC Resettable Fuse. Principles of PPTC Resettable Fuse. Typical PTC application. Products Selection Guide:
PPT Resettable use Principles of PPT Resettable use Polymer Positive Temperature oefficient (PPT) fuse is an overcurrent protection device that trips when a certain trip cur rent is exceeded. In contrast
More informationUsing special passivation material, and has good moisture resistance, corrosion resistance, high reliability.
-TH HIGH STILITY THIN FILM HIP FIXED RESISTOR - TH SERIES Features ( 0.0%; ppm/ ) Low TR and high accuracy( 0.0%; ppm/ ) Suit for re-flow and wave soldering With good sufuration-resistant perfornance ROHS
More information30 to 35 ma G. Samples. Symbol Parameter Test Conditions Value Unit RMS on-state current T C = 80 C 20 A I T(AV)
Sxx20x & Sxx25x Series RoHS Description Excellent unidirectional switches for phase control applications such as heating and motor speed controls. Standard phase control SCRs are triggered with few milliamperes
More informationFrelTec GmbH. Thick Film Chip Resistor SMD Low Ohm
GmbH Mathildenstr. 10A 82319 Starnberg Germany Thick Film Chip Resistor SMD Low Ohm 9/10/2012 1/13 GmbH www.freltec.com SPECIFICATION Part Number 016 05 * 001k * J * T05 ** *** Type Size Value Tolerance
More informationQxx15xx & Qxx16xHx Series
Teccor brand Thyristors Description 15 mp and 16 mp bi-directional solid state switch series is designed for C switching and phase control applications such as motor speed and temperature modulation controls,
More informationNTC Thermistor:TSM Series
Features. RoHS & Halogen Free (HF) compliant. EIA size: 00, 00, 00, 080. Highly reliable structure. Operating temperature range: -0 ~+. Wide resistance range. Cost effective. Agency recognition: UL / cul
More informationC310T-SC 3.6 mm x 10 mm Time-delay, axial lead ceramic tube fuses
Pb HALOGEN HF FREE Applications Primary circuit protection: Power supplies LED and general lighting Consumer electronics Desktop, laptop and notebook Test equipment Agency information curus Recognition
More informationMAU200 Series. 1W, High Isolation SIP, Single & Dual Output DC/DC Converters MINMAX. Block Diagram. Key Features
Component Distributors, Inc. ~ www.cdiweb.com ~ sales@cdiweb.com ~ -0--33 W, High Isolation SIP, Single & DC/DC s Key Features Efficiency up to 00 Isolation MTBF >,000,000 Hours Low Cost Input, and Output
More informationElectrical Specifications. Maximum Overload Voltage. Maximum Working Voltage (1) 25V 50V 50V. Schematics
RVF Series onvex hip Resistor rray Resistive roduct Solutions Features: Thick film resistor element Multiple circuit types available Ideal SMD substitute for leaded networks RoHS compliant and halogen-free
More informationULTRA-SLIM POLARIZED RELAY. Initial breakdown voltage* 2. Unit weight. Ex. TN 2 L2 H 12V
TN ULTR-SLIM POLRIZED RELY TN-RELYS 4....8.8 SPEIFITIONS ontact rrangement Initial contact resistance max. (y voltage drop ) ontact material Rating power UL/S rating Expected life (min. operations) switching
More information5 V/10 V Low Drop Voltage Regulator TLE 4266
5 /1 Low Drop oltage Regulator TLE 266 Features Output voltage 5 or 1 Output voltage tolerance ±2% 12 ma current capability ery low current consumption Low-drop voltage Overtemperature protection Reverse
More informationMMBT2369A NPN Switching Transistor
MMBT69A NPN Switching Transistor Description This device is designed for high speed saturated switching at collector currents of ma to ma. Sourced from process. SOT-. Base. Emitter. ollector MMBT69A NPN
More informationElectrical Specifications. Maximum Overload Voltage. Maximum Working Voltage (1) 25V 50V 50V. Schematics
Features: Thick film resistor element Multiple circuit types available Ideal SMD substitute for leaded networks RoHS compliant and halogen-free uto-placement capability Square corner construction standard
More informationcoaxial filters & interconnects
coaxial filters & interconnects oaxial Filters & Interconnects Introduction pplication Guidelines............. F3-F8 Military ross Reference........... F9-F mp ross Reference............ F-F6 Surface Mount
More informationDouble-Sided Chip Resistors
Double-Sided Two parallel resistance elements in a single chip Excellent pulse withstand performance Laser trimmed up to 0.5% tolerance Enhanced working voltage Enhanced power rating Pb-free terminations
More informationFundamentals of Polymeric PTC 0vercurrent Circuit Protection
Fundamentals of Polymeric PTC 0vercurrent Circuit Protection 2 Polymeric PTC Technology The Problem of Overcurrents An overcurrent is an abnormally high current that has the potential to cause failure
More information52- Inner Taping dimension or 73- Inner Taping dimension ZB- Z version. UL = UL Version YY = Standard
Precision Fusible safety Wirewound Resistors Axial and SMD Version Ceramic core Flame retardant coating UL42 Recognized (file E330640) ORDERING CODE-Example New SAP Part Nr.: CRF 300 J T - 73-50R UL Serie
More informationShielded Power Inductors TL- 4020SG Series (4.0 x 4.0 x 2.1mm)
Shielded Power Inductors TL- 42SG Series (4. x 4. x 2.1mm) FEATURES Low DCR and excellent current handling 4. x 4. mm footprint; 2.1 mm maximum height Operating temperature range: 4 C to +125 C with Irms
More informationSMD Switch SI-C3436A General specification. Soldering conditions Reflow Soldering condition. Standard Reel Dimensions (mm) Packing specification
SMD Switch SI - C3436A - 7017 Features External Dimensions : 3.4mm x 3.6mm, Height 0.70mm Suitable for thinner and lighter portable devices Suitable for water proof devices Reflow soldering Package With
More informationMuti-Layer Thermistor
Document No TMTR-XXOS002A 1/10 1. Scope : This specification applies for the Lead-Free MTR series of Muti-Layer thermistor made by TA-I. 2. Construction: Protective Coating Sn Plating Ni Plating Ag Electrode
More informationISA-PLAN // Precision resistors. SMS // Size Features
Features 5 W power rating at 70 C Constant current up to 25 A (5 mohm) excellent long-term stability High pulse power rating Mounting: Reflow-, and IR-soldering AEC-Q200 qualified rohs 20/65/EU compliant
More informationCal-Chip Electronics, Incorporated TC Series Tantalum Solid Electrolytic Capacitors - Resin Molded Chip Type, Standard Type
: The T Series is designed for hybrid circuit and low profile printed circuit board applications where inductance is to be minimized, or where substrate space is at a premium. They can be attached to substrates
More informationTeccor brand Thyristors 65 / 70 Amp Standard SCRs
Sxx65x & Sxx70x Series RoHS Description Excellent unidirectional switches for phase control applications such as heating and motor speed controls. Standard phase control SCRs are triggered with few milliamperes
More informationLead-Free Current Sensing Resistors RLS Series ( Halogen-Free )
page 1/8 1. Scope: This specification applied to the products of Lead-Free current sensing resistor of metal foil for Lead-Free RLS series manufactured by TA-I TECHNOLOGY CO.,LTD. 2. Type Designation:
More informationLow Drop Voltage Regulator TLE 4296
Low Drop Voltage Regulator TLE 4296 Features Three versions: 3.0 V, 3.3 V, 5.0 V Output voltage tolerance ±4% Very low drop voltage Output current: 30 ma Inhibit input Low quiescent current consumption
More informationDC/DC regulator Input V Output up to 16 A
PMC 4000 series Contents Product Program...................... 2 Mechanical Data...................... 3 Connections......................... 3 Absolute Maximum Ratings............. 4 Input...............................
More informationThick Film Chip Resistors (CR, CJ Series)
Thick Film hip Resistors (R, J Series) Structure and material D E Features Low Noise Nickel arrier Terminations pplication General Purpose ode Structure Material oating Glass or Epoxy Resistor RuO2 Resistor
More information5-V Low Drop Fixed Voltage Regulator TLE 4279
5-V Low Drop Fixed Voltage Regulator TLE 4279 Features Output voltage tolerance ±2% 15 ma current capability Very low current consumption Early warning Reset output low down to V Q = 1 V Overtemperature
More informationFundamentals of PolySwitch Overcurrent and Overtemperature Devices
Fundamentals of PolySwitch Overcurrent and Overtemperature Devices Polymeric PTC Technology The Problem of Overcurrents An overcurrent is an abnormally high current that has the potential to cause failure
More informationProdukt Information. Ultra Low Ohm (Metal Strip) Chip Resistor (LR Series) Scope. Features. Applications. Construction
Scope Ultra Low Ohm (Metal Strip) Chip Resistor (LR Series) -This specification applies to all sizes of rectangular-type fixed chip resistors with alloy as mater. Features -High power rating up to 3 Watts
More informationCeramic PTC Thermistor: PT Series
Sensor Features. RoHS compliant 2. Small size 3. Very fast reaction time 4. Wide range of protection temperatures 5. Stable over a long life 6. Operating temperature range: 0 ~ Ts+25 C (V=Vmax) 7. Agency
More informationKLKd Series 10x38 FUSES
KLKd Series 0x FUSES 0 VAC 0 VDC /0- A Fast Acting Description The KLKD fuse series is fast-acting with a high DC voltage rating. This family of Midget style fuses (0 x mm) is used in solar combiner boxes
More information0.5 (.020) (.051) 0.2 (.008) min 0.2 (.008) min
With Nickel Barrier Termination NB 12 - NB 20 Chip thermistors are high quality and low cost devices especially developed for surface mounting applications. They are widely used for temperature compensation
More informationMAU100 Series. 1W, Miniature SIP, Single & Dual Output DC/DC Converters MINMAX. Block Diagram. Key Features
MAU Series W, Miniature SIP, Single & DC/DC s Key Features Efficiency up to 0 Isolation MTBF >,000,000 Hours Low Cost Input,, and Output 3.3,,9,,,{,{9,{ and { Temperature Performance -0 to UL 9V-0 Package
More informationSamples. Symbol Parameter Test Conditions Value Unit RMS on-state current T C = 90 C 55 A I T(AV) Average on-state current T C
Sxx55x Series RoHS Description Excellent unidirectional switches for phase control applications such as heating and motor speed controls. Standard phase control SCRs are triggered with few milliamperes
More informationFrelTec GmbH. Multilayer Chip Ferrite Bead SMD
GmbH Mathildenstr. 10A 82319 Starnberg Germany SMD 5/16/2016 1/12 GmbH www.freltec.com SPECIFICATION Part Number 19C 03 * 151 * A50 D * Q * T04 _ Type Size Impedance Rated Current Material Toler ance Packing
More informationApproval sheet. WLBD2012 Chip Bead. *Contents in this sheet are subject to change without prior notice.
WLBD2012 Chip Bead *Contents in this sheet are subject to change without prior notice. Page 1 of 8 ASC_ WLBD2012 Series_V5.0 Jun. 2017 FEATURES 1. Closed magnetic circuit. APPLICATIONS 1. Noise reduction
More informationApproval sheet. WLBD1005 Chip Bead. *Contents in this sheet are subject to change without prior notice.
WLBD1005 Chip Bead *Contents in this sheet are subject to change without prior notice. Page 1 of 8 ASC_ WLBD1005 Series_V4.0 Jun. 2017 FEATURES 1. Closed magnetic circuit. APPLICATIONS 1. Noise reduction
More informationC7400A and C7400C Enthalpy Sensors
70 and 70 Enthalpy Sensors PROUT T FETURES PPLITION The 70 Enthalpy Sensor is used with the economizer logic modules with the,,, and performance curves; the 70 sensor is used with the logic modules with
More informationCree XLamp XM-L Color LEDs
Product family data sheet CLD-DS58 Rev 5C Cree XLamp XM-L Color LEDs Product Description The XLamp XM-L Color LED is a multicolor LED that provides high lumen output in a small package. Compared to discrete
More informationNPN/PNP low V CEsat Breakthrough in Small Signal (BISS) transistor pair in a SOT457 (SC-74) Surface Mounted Device (SMD) plastic package.
Rev. 02 14 July 2005 Product data sheet 1. Product profile 1.1 General description NPN/PNP low V CEsat Breakthrough in Small Signal (BISS) transistor pair in a SOT457 (SC-74) Surface Mounted Device (SMD)
More informationRS1A - RS1M Fast Rectifiers
RSA - RSM Fast Rectifiers Features Glass-Passivated Junction For Surface Mounted Applications uilt-in Strain Relief, Ideal for Automated Placement UL Certified: Certificate # E326243 SMA/DO-24AC COLOR
More informationFIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE & HIGH OHM. RoHS COMPLIANCE ITEM Halogen and Antimony Free
Spec. No.: RHC K HTS 0001 /8 Date: 2017. 1. 10 Specification Title: FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE & HIGH OHM Style:,20 RoHS COMPLIANCE ITEM Halogen and Antimony Free Product specification
More informationFault Calculation Methods
ELEC9713 Industrial and Commercial Power Systems Fault Calculation Methods There are two major problems that can occur in electrical systems: these are open circuits and short circuits. Of the two, the
More informationFMS series Metal Strip Shunt Lead Free Current Sensing Resistors
1. Features......2 2. Applications...... 2 3. Dimension and construction.. 2 4. Power Derating Curve....3 5. Rating.3 6. Part Number.. 3 7. Marking / Soldering..4 8. Reliability Performance..5 9. Packing.
More informationCURRENT LIMIT TYPE 6-PIN DIP, HIGH ISOLATION VOLTAGE 1-ch Optical Coupled MOS FET
Solid State Relay OCMOS FET PS7341C-1A,PS7341CL-1A CURRENT LIMIT TYPE 6-PIN DIP, HIGH ISOLATION VOLTAGE 1-ch Optical Coupled MOS FET DESCRIPTION The PS7341C-1A and PS7341CL-1A are solid state relays containing
More informationPrecision, Quad, SPDT, CMOS Analog Switch
19-0189; Rev 1; 6/99 Precision, Quad, SPDT, MOS Analog Switch General Description The is a precision, quad, single-pole doublethrow (SPDT) analog switch. The four independent switches operate with bipolar
More informationApproval sheet. WLBD1608 Chip Bead. *Contents in this sheet are subject to change without prior notice.
WLBD1608 Chip Bead *Contents in this sheet are subject to change without prior notice. Page 1 of 8 ASC_ WLBD1608 Series_V4.0 Sep. 2016 FEATURES 1. Closed magnetic circuit. APPLICATIONS 1. Noise reduction
More information5-V Low Drop Fixed Voltage Regulator TLE
5-V Low Drop Fixed Voltage Regulator TLE 427-2 Features Output voltage tolerance ±2% 65 ma output current capability Low-drop voltage Reset functionality Adjustable reset time Suitable for use in automotive
More informationSMD version of BUK125-50L
DESCRIPTION QUICK REFERENCE DATA Monolithic logic level protected SYMBOL PARAMETER MAX. UNIT power MOSFET using TOPFET2 technology assembled in a 5 pin surface mounting plastic package. V DS I D Continuous
More informationSpecifications J series Part Number Rated urrent Resistivity Working J03 (0201 Type) J05 (0402 Type) 0.5(70 ) 1(70 ) How to alculate Rated Voltage Pow
Structure and material imensions c d Specifications L c d W T Features Low Noise Nickel arrier Terminations pplication General Purpose ode Structure Material oating Glass or Resin Resistor Type(I Size)
More informationPrecision Thin Film Nichrome Chip Resistors
Resistors Precision Thin Film Precision thin film technology Extended ohmic range 1R M Precision to ±0.01% and ppm/ Passivated range for superior humidity performance oad life stability and humidity to
More information4. Supplementary Information
. Supplementary Information urrent Transfer Ratio (TR), LED Trigger urrent (IFT) Ranking and Marking Standard rank classifications are applied for the TR of transistor-type photocouplers and for the IFT
More informationApproval sheet. WLBD0603 Chip Bead. *Contents in this sheet are subject to change without prior notice.
WLBD0603 Chip Bead *Contents in this sheet are subject to change without prior notice. Page 1 of 8 ASC_ WLBD0603 Series_V2.0 Sep. 2016 FEATURES 1. Closed magnetic circuit. APPLICATIONS 1. Noise reduction
More informationFrelTec GmbH. Metal Film Resistor
GmbH Mathildenstr. 10A 82319 Starnberg Germany Metal Film Resistor 10/5/2010 1/21 Freltec GmbH www.freltec.com SPECIFICATION Part Number 052 012 * N * J * TB * E * 1 * _ * _ * Type 052 : Metal Film Resistor
More informationAPPROVAL SHEET FOR AL. ELECTROLYTIC CAPACITORS
NO : ED-A5540 TO : APPROVED APPROVAL SHEET FOR AL. ELECTROLYTIC CAPACITORS : BY: Series Description Part No. HV series, PLEASE RETURN US ONE COPY YOUR SIGED SPECIFICATION AFTER YOU APPROVED OF IT. APPROVED
More informationFPF1007-FPF1009 IntelliMAX Advanced Load Products
FPF07-FPF09 IntelliMAX Advanced Load Products Features 1.2 to 5.5 V Input Voltage Range Typical R ON = 30 mω at = 5.5 V Typical R ON = 40 mω at = 3.3 V Fixed Three Different Turn-on Rise Time µs / 80 µs
More informationLow Drop Voltage Regulator TLE 4295
Low Drop Voltage Regulator TLE 4295 Features Four versions: 2.6 V, 3.0 V, 3.3 V, 5.0 V tolerance ±4% Very low drop voltage Output current: 30 ma Power fail output Low quiescent current consumption Wide
More informationonlinecomponents.com
MMBZ5xxBLT Series, SZMMBZ5xxBLTG Series Zener Voltage Regulators 5 mw SOT Surface Mount This series of Zener diodes is offered in the convenient, surface mount plastic SOT package. These devices are designed
More information6-PIN DIP, 400V BREAK DOWN VOLTAGE 1-ch Optical Coupled MOS FET
DESCRIPTION Solid State Relay OCMOS FET PS7141-1A,PS7141L-1A 6-PIN DIP, 4V BREAK DOWN VOLTAGE 1-ch Optical Coupled MOS FET The PS7141-1A and PS7141L-1A are solid state relays containing GaAs LEDs on the
More informationC7400A and C7400C Enthalpy Sensors
70 and 70 Enthalpy Sensors PROUT T FETURES Senses and combines temperature and humidity of outdoor air. Long lasting thermistor sensing element is accurate and stable over time. s enthalpy of outdoor air
More informationTEA10402V15A0 Engineering Specification
TEA10402V15A0 Engineering 1. Scope This specification is applied to electrostatic discharge (ESD) protection. It is designed to protect the high-speed data lines against ESD transients. It has very low
More informationExam 3--PHYS 102--S14
Name: Exam 3--PHYS 102--S14 Multiple Choice Identify the choice that best completes the statement or answers the question. 1. Which of these statements is always true? a. resistors in parallel have the
More informationLow Drop Voltage Regulator TLE
Low Drop Voltage Regulator TLE 4296-2 Features Two versions: 3.3 V, 5.0 V Output voltage tolerance ±4% Very low drop voltage Output current: 30 ma Inhibit input Low quiescent current consumption Wide operation
More informationWLBD1608HC High Current Chip Bead
WLBD1608HC High Current Chip Bead *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_ WLBD1608HC Series_V5.0 Jun.2017 FEATURES 1. Closed magnetic circuit. 2. High current
More informationApplications. Capacitance Tolerance G = ±2% J = ±5%
Surface Mount Metallized PPS Film Capacitor LDB, Unencapsulated Stacked Chip, Size 1206 1812, 16 and 50 VDC Overview Polyphenylene sulphide (PPS) film capacitor for surface mounting. Applications Typical
More informationMAU100 Series. 1W, Miniature SIP, Single & Dual Output DC/DC Converters MINMAX. Key Features
W, Miniature SIP, Single & Dual Output DC/DC s Key Features Efficiency up to % 000 Isolation MTBF >,000,000 Hours Low Cost Input,, and Output 3.3,,9,,,{,{9,{ and { Temperature Performance -0] to +] UL
More informationFrelTec GmbH. Shielded SMD Power Inductors Power Choke
GmbH Mathildenstr. 10A 82319 Starnberg Germany Power Choke 11/18/2015 1/16 GmbH www.freltec.com SPECIFICATION Part Number 175 0315D * 101 * M E02 ** Type Size Value Tolerance Packing 175 : Shielded SMD
More informationPS7113-1A,-2A,PS7113L-1A,-2A
Solid State Relay OCMOS FET PS7113-1A,-2A,PS7113L-1A,-2A 6, 8-PIN DIP, 3 ma CONTINUOUS LOAD CURRENT 1-ch, 2-ch Optical Coupled MOS FET DESCRIPTION The PS7113-1A, -2A and PS7113L-1A, -2A are solid state
More informationPRODUCT SPECIFICATION 1 SCOPE APPLICABLE STANDARDS CATALOG NO. STRUCTURE..3 4 CONNECTOR SHAPE, DIMENSIONS AND MARTERIALS..
1 of 1 A Table of Contents: 1 SCOPE.. 3 2 APPLICABLE STANDARDS..... 3 3 CATALOG NO. STRUCTURE..3 4 CONNECTOR SHAPE, DIMENSIONS AND MARTERIALS..3 5 ACCOMMOD CONDUCTORS (CIC).....3 6 PACKAGING CONDITION........3
More informationWW12E, WW08E, WW06E ±5%, ±1% Thick film low ohm chip resistors Size 1206, 0805, 0603 RoHS Exemption free and Halogen free
WW12E, WW08E, WW06E ±5%, ±1% Thick film low ohm chip resistors Size 1206, 0805, 0603 RoHS Exemption free and Halogen free *Contents in this sheet are subject to change without prior notice. Page 1 of 7
More informationWW25R ±1%, ±5%, 2W Metal plate low ohm power chip resistors Size 2512 (6432)
WW25R ±1%, ±5%, 2W Metal plate low ohm power chip resistors Size 2512 (6432) Current Sensing Type Automotive AEC Q200 compliant *Contents in this sheet are subject to change without prior notice. Page
More informationMMBZ5221BLT1 Series. Zener Voltage Regulators. 225 mw SOT 23 Surface Mount
MMBZ5BLT Series Zener Voltage Regulators 5 mw SOT Surface Mount This series of Zener diodes is offered in the convenient, surface mount plastic SOT package. These devices are designed to provide voltage
More informationWW25Q ±1%, ±5%, 1W Metal plate low ohm power chip resistors Size 2512 (6432)
WW25Q ±1%, ±5%, 1W Metal plate low ohm power chip resistors Size 2512 (6432) Current Sensing Type Automotive AEC Q200 compliant *Contents in this sheet are subject to change without prior notice. Page
More informationFrelTec GmbH. Multilayer Chip Ferrite Bead SMD
GmbH Mathildenstr. 10A 82319 Starnberg Germany SMD 4/14/2016 1/15 GmbH www.freltec.com SPECIFICATION Part Number 196 05 * 151 * S * J * E02 _ Type Size Impedance Material Tolera nce Packing Optional 196
More informationSurface Mounted Power Resistor Thick Film Technology
D2TO20 DIMENSIONS in millimeters 1.6 10.1 Surface Mounted Power Resistor 1.25 4.5 FEATURES 20 W at 25 C case temperature Surface mounted resistor - TO - 263 (D2 PAK) style package Wide resistance range
More informationBAT54XV2 Schottky Barrier Diode
June 2015 BAT54XV2 Schottky Barrier Diode Features Low Forward Voltage Drop Flat Lead, Surface Mount Device at 0.60mm Height Extremely Small Outline Plastic Package SOD523F Moisture Level Sensitivity 1
More information