Features. Circuit Schematic. Typical Electrical Characteristics. Applications. Surface Mount EMI Filters Three Terminal Chips
|
|
|
- Amberly Crawford
- 5 years ago
- Views:
Transcription
1 Features Excellent performance in high current applications Non-polar, surface mountable Superior filtering characteristics Superb ability to withstand transient voltages and surge Offers exceptional solderability and resistance to solder heat vailable in 3, 5, 15 and 16 body size Two amp current rating available vailable lead free/rohs Compliant pplications Cellular telephones and base stations Telecommunication equipment Industrial electronic interface or programmable controllers Electronic automotive equipment Computer and peripheral equipment Circuit Schematic Input Typical Electrical Characteristics Capacitance Range COG (NPO) pf to 4 pf X7R 4 pf to, pf YV5 2, pf X5R, pf Capacitance Tolerance COG (NPO) +/-% X7R +/-% Y5V +/-% X XX5R +/- % Temperature Coefficient COG (NPO) ±/ ppm/ C, to +125 C X7R +/-15%, to +125 C Y5V -25 to +85 C X5R -55 to +85 C Insulation Resistance up to, pf Megohms , pf Megohms DC Resistance mp or less.3 ohm max mp.8 ohm max mp.4 ohm max. Rated Voltage up to VDC Rated Current up to 2 mps PI TECHNOLOGIES 61 vonia Rd. Fairview, P Ph: Fax: eis.apitech.com SM2
2 Selection Guide Rated Rated IR DC ody Capacitance Capacitance Temp. Voltage Current (Megohms Resistance Operating Part Number Size (in picofarad) Tolerance Charact. (Volts DC) (mps DC) Min.) (ohm Max.) Temp. SF3C2SN-* 3 +/-% COG.3,.3-55/+125 C SF3C4SN-* 3 +/-% COG.3,.3-55/+125 C SF3C1SN-* 3 +/-% COG.3,.3-55/+125 C SF3C1SN-* 3 2 +/-% COG.3,.3-55/+125 C SF3X1SN-* 3 4 +/-% X7R.3,.3-55/+125 C SF3X2SN-* 3 1, +/-% X7R.3,.3-55/+125 C SF3X2SN-* 3 2, +/-% X7R.3,.3-55/+125 C SF3X3SNC-* 3, +/-% X7R 25.5,.15-55/+125 C SF3R4MND-* 3, +/- % X5R 25 1.,.8-55/+85 C SF5C2SNC-* 5 +/-% COG.4,.3-55/+125 C SF5C4SNC-* 5 +/-% COG.4,.3-55/+125 C SF5C1SNC-* 5 +/-% COG.4,.3-55/+125 C SF5C1SNC-* 5 2 +/-% COG.4,.3-55/+125 C SF5X1SNC-* 5 4 +/-% X7R.4,.3-55/+125 C SF5X2SNC-* 5 1, +/-% X7R.4,.3-55/+125 C SF5X2SNC-* 5 2, +/-% X7R.4,.3-55/+125 C SF5X3SND-* 5, +/-% X7R 1.,.8-55/+125 C SF15C2SN-* 15 +/-% COG.3,.3-55/+125 C SF15C4SN-* 15 +/-% COG.3,.3-55/+125 C SF15C1SN-* 15 +/-% COG.3,.3-55/+125 C SF15C1SN-* /-% COG.3,.3-55/+125 C SF15X1SN-* /-% X7R.3,.3-55/+125 C SF15X2SN-* 15 1, +/-% X7R.3,.3-55/+125 C SF15X2SN-* 15 2, +/-% X7R.3,.3-55/+125 C SF15X3SN-* 15, +/-% X7R.3,.3-55/+125 C SF15X3SND-* 15, +/-% X7R 1. 5,.8-55/+125 C SF16C2SDN-* 16 +/-% COG.3,.3-55/+125 C SF16C4SDN-* 16 +/-% COG.3,.3-55/+125 C SF16C1SDN-* 16 +/-% COG.3,.3-55/+125 C SF16C1SDN-* /-% COG.3,.3-55/+125 C SF16C1SDN-* /-% COG.3,.3-55/+125 C SF16X2SDN-* 16 1, +/-% X7R.3,.3-55/+125 C SF16X2SDN-* 16 2, +/-% X7R.3,.3-55/+125 C SF16X3SDN-* 16, +/-% X7R.3,.3-55/+125 C SF16X3SDN-* 16, +/-% X7R.3,.3-55/+125 C 2 MP FILTER SF16Y4ZNE-* 16 2, +/-% Y5V 2. 1,.4-25/+85 C old Letter = High Current pplications = Temperature Characteristic is +/-% -* = Denotes Packaging Style. Replace with T for Tape and Reel or for ulk PI TECHNOLOGIES 61 vonia Rd. Fairview, P Ph: Fax: eis.apitech.com SM3
3 Insertion Loss (Per MIL-STD-2) SF3 Series Insertion loss (d).4 mp 1, 2, 1 SF15 Series.3 mp.3 and.5 mps SF5 Series, 4 1, 2, Insertion loss (d) 1 mp mp, 1 1 mp,.1 1 SF16 Series.3 mp 2 mp,, 1, 2, ,.1 1 PI TECHNOLOGIES 61 vonia Rd. Fairview, P Ph: Fax: eis.apitech.com SM4
4 LE LM LE Surface Mount EMI Filters L T W Mechanical Dimensions End Middle ody ody ody Terminal Terminal ody Length Width Thickness Length Length Style/Size (L) (W) (T) (LE) (LM) SF3 SF5.63 +/ / / /-.6. +/-.6 (1. +/-.15) (.+/-.15) (.6+/-.15) (.2 +/-.15) (.5 +/-.15).79 +/ / / /-.8 +/-.8 (2. +/-.2) (1.25 +/-.2) (.8 +/-.2) (.3 +/-.2) (.6 +/-.2) SF15 SF / / / / /-.12 (3.2 +/-.2) (1.25 +/-.2) (.7 +/-.2) (.4 +/-.3) (1.1 +/-.3).177 +/ / / / /-.12 (4.5 +/-.3) (1.6 +/-.3) (1. +/-.3) (.5 +/-.3) (1.4 +/-.3) Ordering Information Example: SF5C1SNCT This part number represents a three terminal chip with a body size of 5 with a COG (NPO) dielectric. The capacitance is 2 pf with a capacitance tolerance of +%/-%. Voltage rating is Volts DC. It has nickel barrier, solder plated terminations and a current rating of.4 mp, ( milliamps). The parts are taped and reeled. SF 5 C 1 S N C T Style Size Ceramic Capacitance Capacitance Rated Termination Current Packaging Code Tolerance Voltage (Vdc) Rating SF 3 C - COG First two S - +%/-% - 25 N - Ni arrier, -.3 T - Tape 5 X - X7R numbers are Z - +%/-% - Solder C-.4 & Reel 15 Y - Y5V significant, M - +/- % D - Plated D-1 - ulk 16 R - X5R the third E-2 number F - 3 refers to G-4 number of H-5 zeroes I - 6 PI TECHNOLOGIES 61 vonia Rd. Fairview, P Ph: Fax: eis.apitech.com SM5
5 Soldering Specifications Soldering Instructions Reflow Soldering Flow Soldering C Recommended oard Pattern Top view Connects to top ottom view Recommended oard Pattern Top view E D F ottom view Through hole.16 to.24 (.4 to.6) Copper Copper Resist C Connects to top Through hole.16 to.24 (.4 to.6) Reflow Soldering oard Pattern ody Dimension Style/Size C SF3. (.5).31 (.8) SF5.39 (1.) SF (2.3) SF16.79 (2.).138 (3.5).51 Recommended Solder Temperature Profile Preheat Solder Cool down Flow Soldering oard Pattern ody Dimension Style/Size C D E F SF3. (.5).31 (.8).31 (.8) (1.8) (.4) SF5.31 (.8).39 (1.).87 (2.2) SF (2.3).118 (3.) SF (3.5) (3.) Recommended Solder Temperature Profile Preheat Solder Cool down Degrees ( C) to 1 C 2 to 2 C Degrees ( C ) to 1 C 2 to 2 C -1 max. 1 min. Seconds min. Seconds General Soldering Notes 1. High soldering temperatures and long soldering times can cause leaching of the termination and adversely affect adhesion. These conditions can also decrease capacitance value. Use the above recommended solder temperature cycle. 2. Due to the mechanical characteristic of ceramic composition, aggressive thermal shock will degrade performance. Preheat the assembly before soldering using the above solder temperature profile as a guide. 3. Use mild flux (less than.2% by weight of Chlorine), preferable rosin based. If water soluble, wash thoroughly to assure all residue is removed from the underside of components. 4. Ultrasonic Cleaning When using an ultrasonic cleaning method, the following range is recommended: Frequency: Not to exceed 28kHz Output Power: Not to exceed W/liter Cleaning Time: 5 minutes max PI TECHNOLOGIES 61 vonia Rd. Fairview, P Ph: Fax: eis.apitech.com SM6
6 Soldering Specifications Package Information Paper Tape Dimensions SF5 and SF15 odies D1 C C1 C2 T1 E Package Quantities W F ody Style/Size Tape and Reel SF3 SF5 4, units/reel 4, units/reel T SF15 4, units/reel SF16 2, units/reel Chip Cavity Tape Holes Hole Diameter Thickness ody Center Indexing Center Indexing Indexing to Carrier Style/ Length Width Width to End to End to Center to Center Indexing Indexing Overall Tape Size W F E C C1 C2 D1 T (Max.) T1 (Max.) SF3 +/-.? +/-.? +/-.12 +/-.2 +/-.4 +/-.4 +/-.4 +/ /- (1. +/-.?) (1.9+/-.?) (8. +/-.3) (3.5 +/-.5) (1.75 +/-.1) (4. +/-.1) (2. +/-.1) (4. +/-.1) ( /-) (1.1) (1.) SF5 +/-.8 +/-.8 +/-.12 +/-.2 +/-.4 +/-.4 +/-.4 +/ /- (1.62 +/-.2) (2.3 +/-.2) (8. +/-.3) (3.5 +/-.5) (1.75 +/-.1) (4. +/-.1) (2. +/-.1) (4. +/-.1) ( /-) (1.1) (1.) SF15 +/-.8 +/-.8 +/-.12 +/-.2 +/-.4 +/-.4 +/-.4 +/ /- (1. +/-.2) (3.5 +/-.2) (8. +/-.3) (3.5 +/-.5) (1.75 +/-.1) (4. +/-.1) (2. +/-.1) (4. +/-.1) ( /-) (1.1) (1.) Package Information Tape and Reel Specification Plastic Carrier Tape Dimensions SF16 ody D1 C C1 C2 T1 Plastic Reel Dimensions ody Style/Size Diameter (Max.) Width (Max.) W E F SF3 7. (1).46 (11.5) SF5 7. (1).46 (11.5) SF15 7. (1).46 (11.5) SF16 7. (1).61 (11.5) ød Center hole T Chip Cavity Tape Holes Hole Diameter Thickness ody Center Indexing Center Indexing Indexing to Style/ Length Width Width to End to End to Center to Center Indexing Center Indexing Overall Tape Size W F E C C1 C2 D (Min.) D1 T (Max.) T1 (Max.) SF16 +/-.8 +/-.8 +/-.8 +/-.2 +/-.4 +/-.4 +/-.4 +/ /- (1. +/-.2) (4. +/-.2) (12. +/-.2) (5.5 +/-.5) (1.75 +/-.1) (4. +/-.1) (2. +/-.1) (4. +/-.1) ( /-) (2.5) PI TECHNOLOGIES 61 vonia Rd. Fairview, P Ph: Fax: eis.apitech.com SM7
coaxial filters & interconnects
coaxial filters & interconnects oaxial Filters & Interconnects Introduction pplication Guidelines............. F3-F8 Military ross Reference........... F9-F mp ross Reference............ F-F6 Surface Mount
High Voltage MLC Chips
NEW 630V RANGE HOW TO ORDER 1808 A A 271 High value, low leakage and small size are difficult parameters to obtain in capacitors for high voltage systems. AVX special high voltage MLC chip capacitors meet
Multilayer Ceramic Chip Capacitors
HIGH VOLTAGE SERIES JARO high voltage series Multilayer Ceramic Capacitors are constructed by depositing alternative layers of ceramic dielectric materials and internal metallic electrodes, by using advanced
GENERAL PURPOSE CAPACITORS
AMERICAN TECHNICAL CERAMICS GENERAL PURPOSE CAPACITORS Low Cost Multilayer Ceramic Capacitors For Surface Mount Applications Manufactured for ATC ISO 9001 REGISTERED COMPANY ATC 001-847, Rev. AA; 5/18
ATC 200 A Series BX Ceramic Multilayer Capacitors
200 A Series BX Ceramic Multilayer Capacitors Case A Size Capacitance Range (.055" x.055") 5 pf to 0.01 µf Low ESR/ESL Mid-K Rugged High Reliability Construction Extended VDC Available, the industry leader,
High Voltage MLC Chips
HOW TO ORDER NEW 630V RANGE 1808 A A 271 K AVX Voltage Temperature Capacitance Code Capacitance Style 600V/630V = C Coefficient (2 significant digits Tolerance 0805 1000V = A NPO (C0G) = A + no. of zeros)
CERAMIC CHIP CAPACITORS
Example below indicates : SNPO series, 470 pf, 5%, 50 Volt, Tape/Reel packed, 0805 case size. (EXAMPLE) S N P O 4 7 1 J 0 5 0 T 2 Series Series Code: SNPO, SX7R, SZ5U, SY5V. Note: SNPO indicates COG(NPO)
Ceramic Chip Capacitors
Introduction RGA Multilayer Ceramic Capacitors are constructed by screen printing alternative layers of internal metallic electrodes onto ceramic dielectric materials and firing into a concrete monolithic
Ceramic Chip Capacitors
Ceramic Chip Capacitors Description Series Capacitance Range Circuit Page NPO Series pf ~. uf 2-4 Z5U Series K pf ~ uf 2-6 Ceramic Capacitors X7R Series 39 pf ~.47 uf 2-8 Axial-eaded Epoxy Coated pf ~.47
ATC 700 B Series NPO Porcelain and Ceramic Multilayer Capacitors
ATC 700 Series NPO Porcelain and Ceramic Multilayer Capacitors Case Size Capacitance Range (.1" x.1") 0.1 pf to 5 pf Low ESR/ESL Zero TCC Low Noise High Self-Resonance Rugged Construction Established Reliability
No Item Code Description Series Reference. Thickness. M B min (mm) T (mm) code. See Thickness Specification Reference Table below
FEATURE A wide selection of sized is available (0201 to 2225) High capacitance in given case size Capacitor with lead-free termination (pure Tin) RoHS and HALOGEN compliant. Application: DC to DC converter.
Multilayer Ceramic Capacitors X7R
Features Miniature size Wide capacitance, TC, voltage and tolerance range Industry standard sizes Available for wave, reflow or vapor phase solder How to Order 0805 104 K 500 N T A C D E F G A C Size Code
POE INTERNATIONAL CORPORATION. SPECIFICATION OF MULTI-LAYER RADIAL-LEADED TYPE CAPACITOR Ver: 8 Page: 1
SPECIFICATION OF MULTI-LAYER RADIAL-LEADED TYPE CAPACITOR Ver: 8 Page:. Scope: Its specification applies to Radial Series Ceramic Capacitor. 2.How to order: CODE: U RD2 R 02 K T Rated Voltage Code:U =
SURFACE MOUNT MONOLITHIC CHIP CAPACITORS COG AND TEMPERATURE COMPENSATING TYPES GRM36/39/40/42-6/42-2/43-2/44-1 Series
COG AND TEMPERATURE COMPENSATING TYPES GRM36/39/40/42-6/42-2/43-2/44-1 Series FEATURES Miniature size No Polarity Nickel Barrier Termination Standard highly resistant to metal migration Uniform dimensions
1. INTRODUCTION 2. FEATURES 3. APPLICATIONS 4.HOW TO ORDER
1. INTRODUCTION General Purpose Multilayer capacitors supplied in bulk or tape & reel package are ideally suitable for thick film hybrid circuits and automatic surface mounting on any printed circuit boards.
Super High AUTO (SHA) Series
PART NO. SFI1206SA240-1R5J 1.1 Technology Data Symbol Value Unit Maximum allowable continuous DC voltage V DC 12 V Breakdown voltage measured Vv 24(±10%) V Maximum clamping voltage V CLAMP < 40 V Maximum
MULTILAYER CHIP CERAMIC CAPACITOR
MULTILAYER CHIP CERAMIC CAPACITOR ( :) 1000V 1.5 50mA 5S 1000V 2000V 1.2 50mA 5S 2000V 1.2 10mA 5S DC-DC 1206 CG 100 J 202 N T (PF) ( ) 0603 0.60 0.30 1.60 0.80 0805 0.08 0.05 2.00 1.25 1206 0.12 0.06
Discoidal Feed-Through Capacitors
ceramic capacitors Ceramic Capacitors we offer performance and cost alternatives to meet varied voltage, capacitance, packaging and budgetary requirements Discoidal Feed-Through Capacitors are ideal for
1.2 Scope: This specification is applied Noise Filter STC-D series supplied
1.0 PURPOSE / SCOPE 1.1 Purpose: To define the quality of Noise Filter STC-D series. 1.2 Scope: This specification is applied Noise Filter STC-D series supplied by SMI-ED. 2.0 GENERAL 2.1 Reference 2.1.1
*Contents in this sheet are subject to change without prior notice.
MULTILAYER CERAMIC CAPACITORS Soft Termination High Voltage Series (SH_200V to 3000V) NP0 & X7R Dielectrics 0603 to 1812 Sizes, 200V to 3000V Halogen Free & RoHS Compliance *Contents in this sheet are
Discoidal Capacitors. Multilayer Discoidal
Discoidal Capacitors Ceramic discoidal feed-through capacitors are the building blocks of the EMI filter industry. API s Spectrum Control discoidal capacitors provide great versatility in meeting varied
MULTI-LAYER HIGH-Q CAPACITORS
MULTI-LAYER HIGH- CAPACITORS These lines of multilayer capacitors have been developed for High- and microwave applications. The S-Series (R03S, R07S, R4S, R5S) capacitors give an ultra-high performance,
AD Scope: Its specification applies to Radial Series Ceramic Capacitor. 2.How to order: CODE
1 1. Scope: Its specification applies to Radial Series Ceramic Capacitor. 2.How to order: CODE U AD10 R 102 K T Rated Voltage CodeT = 25 VDC U = 50 VDC Size Code : refer to the description in 3 Dielectric
2011 New Products of MLCC
2011 New Products of MLCC 1 SAFETY CERTIFIED CHIP CAPACITOR. The The safety safety capacitors capacitors offered offered by by are are designed designed for for surge surge or or lightning lightning immunity
Cap. pf R R R R Rated WVDC 2.2 2R R R A,B, 0.5 0R5 3.
0201N (.020" x.010") 0201N Capacitance & Rated Voltage Table Cap. pf 0.1 0R1 Tol. Rated WVDC Cap. pf 2.2 2R2 Remark: special capacitance, tolerance and WVDC are available, consult with PASSIVE PLUS. Tol.
Cal-Chip Electronics, Incorporated High Voltage Ceramic Chip Capacitors
Cal-Chip Electronics, Incorporated High Voltage Ceramic Chip Capacitors CHV SERIES Introduction Cal-Chip Electronics, Incorporated operates a policy of continuous development for its ranges of Multilayer
MULTILAYER CERAMIC CAPACITORS Safety Certified X1/Y2 Series 1808 to 2220 Sizes NP0 & X7R Dielectrics RoHS Compliance
Safety Certified X1/Y2 MULTILAYER CERAMIC CAPACITORS Safety Certified X1/Y2 Series 1808 to 2220 Sizes NP0 & X7R Dielectrics RoHS Compliance *Contents in this sheet are subject to change without prior notice.
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS NP0/X5R/X7R
Product Specification May 5, 2017 V.10 DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS 01005 NP0/X5R/X7R 4 V TO 25 V 0.5 pf to 470 nf RoHS compliant & Halogen Free 2 SCOPE This specification describes
CERAMIC CHIP CAPACITORS
INTRODUCTION Ceramic chips consist of formulated ceramic dielectric materials which have been fabricated into thin layers, interspersed with metal electrodes alternately exposed on opposite edges of the
Commercial Chip - R3L 16Vdc to 5kVdc
Commercial Chip - R3L 16Vdc to 5kVdc A range of commercial MLC chip capacitors in R3L dielectric. This is a Class I temperature compensating N22 dielectric with an energy density that exceeds conventional
C 052 C 272 F 2 G 5 T A Rated Voltage (VDC) 1 = = 200. Capacitance Tolerance 1. D = ±0.5 pf F = ±1% G = ±2% J = ±5% K = ±10%
Radial Through Hole Multilayer Ceramic Capacitors Radial, Molded, C0G Dielectric, 50 200 VDC (Commercial Grade) Overview KEMET s epoxy molded radial through-hole ceramic capacitors in C0G dielectric feature
PAN OVERSEAS ELECTRONIC CO., LTD.
Document No.: PRODUCT: MULTILAYER CERAMIC CAPACITOR TYPE : CHIP CAPACITOR APPROVED BY CUSTOMER ELECTRONIC CO., LTD. TAIWAN HEAD OFFICE: TEL: 02-25213252~5, 02-25634133 FAX: 02-25373069 TAIWAN FACTORY:
AT Series. High Temperature MLCC 200ºC & 250 C Rated HOW TO ORDER ELECTRICAL SPECIFICATIONS DIMENSIONS AT10
Present military specifications, as well as a majority of commercial applications, require a maximum operating temperature of 25 C. However, the emerging market for high temperature electronics demands
TEA10402V15A0 Engineering Specification
TEA10402V15A0 Engineering 1. Scope This specification is applied to electrostatic discharge (ESD) protection. It is designed to protect the high-speed data lines against ESD transients. It has very low
Multilayer Ceramic Capacitors Y5V
Multilayer Ceramic Capacitors Features Miniature size Wide capacitance, TC, voltage and tolerance range Industry standard sizes Available for wave, reflow or vapor phase solder How to Order 0805 F 104
Low Inductance Ceramic Capacitor (LICC)
Low Inductance Ceramic Capacitor (LICC) LICC(Low Inductance Ceramic Capacitor) is a kind of MLCC that is used for decoupling in High Speed IC. The termination shape of LICC is different from that of MLCC.
MULTILAYER CERAMIC CAPACITORS
MULTILAYER CERAMIC CAPACITORS 1. INTRODUCTION MLCC Consists of a conducting material and electrodes. To manufacture a chip-type SMT and achieve miniaturization, high density and high efficiency, ceramic
CHIP TRIM CERAMIC TRIMMER CAPACITORS AT 0300 RoHS & AT 1300 RoHS
AT 0300 & AT 1300 SURFACE MOUNT TRIMMER CAPACITORS, COMPLIANT Description Very compact package type Ceramic dielectric Special design for reflow soldering use Rated voltage 100 VDC Low temperature coefficient
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose Class 1, NP0
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose Class 1, 16 V TO 50 V 0.22 pf to 33 nf RoHS compliant & Halogen Free Product Specification August 05, 2011 V.8 Product specification
Multilayer Ceramic Chip Capacitors
SELECTION OF CERAMIC CHIP CAPACITORS JARO Multilayer Ceramic Chip Capacitors offer the most complete range of characteristics and configurations available in the industry. We suggest your selection of
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS. Mid-voltage NP0/X7R. Product Specification April 16, 2015 V.
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS Mid-voltage NP0/X7R 100 V TO 630 V 0.47 pf to 2.2 µf RoHS compliant & Halogen Free Product Specification April 16, 2015 V.15 Product specification
0805 CG 102 J 500 N T
NPO/COG for General-use is class I high frequency capacitor, its capacitance is very stable, almost will not change along with the temperature, voltage and time. Specially be suitable for high frequency
MULTILAYER CERAMIC CAPACITORS General Purpose Series (10V to 100V) 0402 to 1812 Sizes NP0, X7R & Y5V Dielectrics RoHS Compliance
MULTILAYER CERAMIC CAPACITORS General Purpose Series (10V to 100V) 0402 to 1812 Sizes NP0, X7R & Y5V Dielectrics RoHS Compliance *Contents in this sheet are subject to change without prior notice. Page
DATA SHEET General Purpose Thick Film Chip Resistor CR Series
Towards Excellence in Quality, Service & Innovation DATA SHEET General Purpose Thick Film Chip Resistor 1% TO 5%, TCR -200 TO +600 SIZE: 01005/0201/0402/0603/0805/1206/1210/2010/2512 RoHs Compliant Jan
S SERIES X1/Y2 SAFETY CAPACITOR SPEC
FEATURES - Peak Impulse Surge: 5,000 VDC - Dielectric withstand strength: 1,500VAC PART NUMBER DESCRIPTION 1808 S 302 N 100 J C E Size Series Rated Voltage Dielectric Capacitance Tolerance Termination
Multi-layer ceramic chip capacitors
Multi-layer ceramic chip capacitors (15 (42) size, chip capacitor)!features 1) Small size (1. x.5 x.5 mm) makes it perfect for lightweight portable devices. 2) Comes packed either in tape to enable automatic
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS Mid-voltage NP0/X7R
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS Mid-voltage NP0/X7R 100 V TO 630 V 0.47 pf to 470 nf RoHS compliant & Halogen Free Product Specification Product specification 2 SCOPE This specification
NP0 Dielectric Non-Magnetic Multilayer Ceramic Capacitors C 0603 CG 101 J 500 P
EIA High Non-Magnetic Multilayer Ceramic Capacitors NP0 Dielectric Non-Magnetic Multilayer Ceramic Capacitors Product Features Non-Magnetism, Suitable for MRI Part Numbering C 0603 CG 101 J 500 P T 1 2
MULTILAYER CERAMIC CAPACITORS Middle & High Voltage Series (200V to 4kV) 0402 to 1812 Sizes NP0, X7R & Y5V Dielectrics Halogen Free & RoHS compliance
MULTILAYER CERAMIC CAPACITORS Middle & High Voltage Series (200V to 4kV) 0402 to 1812 Sizes NP0, X7R & Y5V Dielectrics Halogen Free & RoHS compliance *Contents in this sheet are subject to change without
Open-mode Design Capacitors
Open-mode Design Capacitors HOW TO ORDER OP 32 B 103 K 201 C T Series Size Dielectric Capacitance Tolerance Rated voltage Termination Packaging OP=Open-mode 21=0805 (2012) 31=1206 (3216) B=X7R Two significant
2.0 2R0. F,G, 0.6 0R R0 Code J,K 0.7 0R R R2 Code 5.1 5R1 Code A,B,C
0402N (.040" x.020") EIA Low ESR Microwave Capacits 0402N (.040" x.020") 0402N Capacitance & Rated Voltage Table Cap. pf Tol. Rated WVDC Cap. pf Tol. Rated WVDC 0.1 0R1 2.0 2R0 10 100 0.2 0.3 0.4 0.5 0R2
Applications: 1808 N 100 J 202 C T. Size Dielectric Capacitance Tolerance Rated Voltage Termination
Features: High voltage in a given case size. High stability and reliability. How To Order: MC Multicomp Description: The middle and high voltage series MLCC is designed by a special internal electrode
ATC 100 A Series Porcelain Superchip Multilayer Capacitors
00 Series Porcelain Superchip Multilayer Capacitors Case Size Capacitance Range (" x ") 0. pf to 00 pf High Q Ultra-Stable Performance Low ESR/ESL High Self-Resonance Low Noise Established Reliability
Gas Discharge Tube (GDT) Data Sheet
Gas Discharge Tube (GDT) Data Sheet Features Provide ultra-fast response to surge voltage from slow-rising surge of 100V/s to rapid-rising surge of 1KV/μs. Stable breakdown voltage. High insulation resistance.
CR-PF Series Ultra-Low Lead Content Thick Film Resistor
RoHS COMPLIANT** & HALOGEN FREE*** 102 Features n Ultra-low lead (Pb) content* n Green technology n High reliability and stability n Thick film paste on high grade ceramic substrate n RoHS compliant**
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, X7R
Product Specification May 26, 2015 V.12 DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, 6.3 V TO 50 V 100 pf to 22 µf RoHS compliant & Halogen Free Product
Prosperity Dielectrics Co., Ltd. 1 ACS-1045 Rev15
1. DESCRIPTION MLCC consists of a conducting material and electrodes. To manufacture a chip-type SMT and achieve miniaturization, high density and high efficiency, ceramic condensers are used. WTC high
1. Reflow soldering only, not suitable for wave or hand soldering, except type 933 can be wave soldered.
1. Reflow soldering only, not suitable for wave or hand soldering, except type 933 can be wave soldered. FILMS 2. Use of flux or cream solder should be limited to one with a halogen content of 0.1% or
0603N Capacitance & Rated Voltage Table
0603N (.060" x.030") 0603N (.060" x.030") 0603N Capacitance & Rated Voltage Table Cap. pf 0.1 0R1 Tol. Rated WVDC Cap. pf 2.2 2R2 Tol. Rated WVDC 0.5 0R5 3.3 3R3 A,B, 24 240 0.6 0R6 3.6 3R6 C,D 27 270
EN: This Datasheet is presented by the manufacturer. Please visit our website for pricing and availability at ore.hu.
EN: This Datasheet is presented by the manufacturer. Please visit our website for pricing and availability at www.hest ore.hu. Description: MLCC consists of a conducting material and electrodes. To manufacture
HIGH VOLTAGE MULTILAYER CERAMIC CAPACITORS
DESCRIPTION: RoHS compliant (*) Capacitors 0805 to 6560 Rated voltage 1000V to 10KV Dielectric Type I and II SMD and leaded versions * Non RoHS version still maintained for current applications. I. Foreword
RS INDUSTRY LIMITED. RS Chip Single ESD Suppressor APPROVAL SHEET. Customer Information. Part No. : Model No. : COMPANY PURCHASE R&D
APPROVAL SHEET Customer Information Customer : Part Name : Part No. : Model No. : COMPANY PURCHASE R&D Vendor Information Name: Part Name RS INDUSTRY LIMITED Chip ESD Part No. RS 0402-5V500S Lot No. PART
Specification of V-PORT XXXX-X-V05 Series
1 Scope Specification of V-PORT-0402 -XXXX-X-V05 Series This specification is applied to ESD and EMI protection for I/O port, for example, VGA, US etc. The customer designed part number drawing take precedence
Multi Layer Ceramic Capacitors
Introduction SAMHA s series of Multi Layer Ceramic(MLC) chip Capacitor is designed to meet a wide variety of need. Multilayer ceramic chip capacitor are avaliable in both Class and Class formulations.
ATC 100 A Series Porcelain Superchip Multilayer Capacitors
0 Series Porcelain Superchip Multilayer Capacitors Case Size Capacitance Range (" x ") pf to 0 pf High Q Low ESR/ESL Low Noise Ultra-Stable Performance High Self-Resonance Established Reliability (QPL),
MULTILAYER CERAMIC CAPACITORS Capacitor Arrays Series (10V to 100V) 4 x 0402, 4 x 0603 Sizes NP0, X7R & Y5V Dielectrics Halogen Free & RoHS Compliance
MULTILAYER CERAMIC CAPACITORS Capacitor Arrays Series (10V to 100V) 4 x 0402, 4 x 0603 Sizes NP0, X7R & Y5V Dielectrics Halogen Free & RoHS Compliance *Contents in this sheet are subject to change without
100 pf to 47µF RoHS compliant & Halogen free
Product Specification August 7, 2017 V.4 DATA SHEET SURFACE MOUNT MULTILAYER CERAMIC CAPACITORS General purpose class II X6S 4 V TO 50 V 0 pf to 47µF RoHS compliant & Halogen free 2 SCOPE This specification
50 TZV 1500 M JDE VB 18X21.5
EXTENDED BASE FEATURES: VB- VIBRATION BASE AEC-Q200 SURFACE MOUNT ROHS COMPLIANT APPLICATIONS: AUTOMOTIVE POWER INDUSTRIAL SPEC: VALUE: MPN :50 TZV 1500 M JDE VB 18X21.5 VDC 50 CAPACITANCE 1500μF +/- 20%
Multilayer Ceramic Chip Capacitors
Kyocera's series of Multilayer Ceramic Chip Capacitors are designed to meet a wide variety of needs. We offer a complete range of products for both general and specialized applications, including CM series
MULTILAYER CERAMIC CAPACITORS
1. DESCRIPTION MLCC consists of a conducting material and electrodes. To manufacture a chip-type SMT and achieve miniaturization, high density and high efficiency, ceramic condensers are used. WTC s MT
High Q / Low ESR Multilayer SMD Ceramic Capacitor 0402, 0603 & 0805 Sizes, NP0 Dielectric, (MCHH)Series
Description: MLCC consists of a conducting material and electrodes. To manufacture a chip-type SMT and achieve miniaturization, high density and high efficiency, ceramic condensers are used. WTC HH series
RS INDUSTRY LIMITED. RS Chip Array ESD Suppressor APPROVAL SHEET. Customer Information. Part No. : Model No. : COMPANY PURCHASE R&D
APPROVAL SHEET Customer Information Customer : Part Name : Part No. : Model No. : COMPANY PURCHASE R&D Vendor Information Name: RS INDUSTRY LIMITED Part Name ARRAY TYPE MULTILAYER VARISTOR Part No. RS
High Voltage Ceramic Capacitors (HVC Series)
Features: RoHS Compliant and Halogen Free Capacitance range: 0.5pF to 2.2uF Voltage range: 200V to 5000V Ceramic monolithic structure provides excellent reliability High-speed automated placement capabilities
Multilayer Chip Capacitors High Voltage
FEATURE Ceramic Body Inner Electrode (NiorPd) Outer Electrode Cu or Ag Ni Sn/Pb - Miniature Size - Highly Reliable Performance in High-Voltage - Industry Standard Size - Tape & Reel for Surface Mount Assembly
Produkt Information. Ultra Low Ohm (Metal Strip) Chip Resistor (LR Series) Scope. Features. Applications. Construction
Scope Ultra Low Ohm (Metal Strip) Chip Resistor (LR Series) -This specification applies to all sizes of rectangular-type fixed chip resistors with alloy as mater. Features -High power rating up to 3 Watts
Surface Mount Multilayer Chip Capacitors
FEAURES Ultra stable class 1 dielectric Four standard sizes High capacitance per unit volume Supplied in tape on reel For high frequency applications Ni-barrier with 100 % tin terminations RoHS COMPLIAN
: 120% Rated Voltage. Capacitance Unit : pf Ex.: 2R0:2.0pF 100: : : Tolerance
CCT Series-High Capacitors Multilayer Ceramic Chip Capacitors [ High Capacitor ] CCT Series Middle (-) ratings from to and sizes from 0603 to 5. Features Special internal electrode design offers the highest
Multi Layer Ceramic Capacitor
Description MLCC consists of a conducting material and electrodes. To manufacture a chip-type SMT and achieve miniaturization, high density and high efficiency, ceramic condensers are used. POE s MLCC
B Multilayer Ceramic Capacitor
B INTRODUCTION ( ) TYPES OF DIELECTRIC MATERIAL AND CAPACITOR ( ) *HIGH FREQUENCY TYPE: The capacitor of this kind dielectric material is considered as Class capacitor, including high frequency COG capacitor
DATA SHEET. SURFACE MOUNT MULTILAYER CERAMIC CAPACITORS General purpose & High capacitance Class 2, X5R. 4 V TO 50 V 100 pf to 100 µf
Product Specification March 31, 2014 V.17 DATA SHEET SURFACE MOUNT MULTILAYER CERAMIC CAPACITORS General purpose & High capacitance Class 2, 4 V TO 50 V 100 pf to 100 µf RoHS compliant & Halogen free Product
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, Y5V
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, 6.3 V TO 50 V 10 nf to 47 µf RoHS compliant & Halogen Free Product Specification Product specification
CONTENT (MLCC) E STANDARD NUMBER... 3 STRUCTURE... 4 ORDERING CODE... 4 GENERAL PURPOSE FOR SMARTPHONE... 5
MLCC MLCC CONTENT (MLCC) E STANDARD NUMBER... 3 STRUCTURE... 4 ORDERING CODE... 4 GENERAL PURPOSE FOR SMARTPHONE... 5 CLASS II: HIGH DIELECTRIC CONSTANT TYPE... 6 X5R Series... 6 TEST SPEC.... 7 PACKAGE...
APPLICATION NOTES FOR MULTILAYER CERAMIC CAPACITORS
APPLICATION NOTES FOR MULTILAYER CERAMIC CAPITORS ELECTRICAL CHARTERISTICS The fundamental electrical properties of multilayer ceramic capacitors are as follows: Polarity: Multilayer ceramic capacitors
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, X5R
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, 6.3 V TO 50 V 10 nf to 100 µf RoHS compliant Product Specification Product specification 2 Surface-Mount
Solid Tantalum Chip Capacitors TANTAMOUNT, Low Profile, Conformal Coated, Maximum CV
Solid Tantalum Chip Capacitors TANTAMOUNT, Low Profile, Conformal Coated, Maximum CV FEATURES New case size offerings. 2mm height Terminations: Tin (2) standard. Low ESR 8mm, 12mm tape and reel packaging
FEATURES STANDARD CONFIGURATION
Metallized Polypropylene 5MP1 SERIES Metallized Polypropylene Metallized Polypropylene and Military Styles CFR13 and CFR14."Hi-Rel" replacement for electrolytics for a broad range of commercial and military
WW25R ±1%, ±5%, 2W Metal plate low ohm power chip resistors Size 2512 (6432)
WW25R ±1%, ±5%, 2W Metal plate low ohm power chip resistors Size 2512 (6432) Current Sensing Type Automotive AEC Q200 compliant *Contents in this sheet are subject to change without prior notice. Page
Non Magnetic Chip C0G & X7R
Non Magnetic Chip CG & X7R This range of MLC chip capacitors that are completely non magnetic. They are designed to operate in non magnetic environments such as Magnetic Resonance Imaging (MRI) and Nuclear
MULTILAYER CERAMIC CAPACITORS High Q / Low ESR Series (HH) 0402, 0603 & 0805 Sizes NP0 Dielectric RoHS Compliance
MULTILAYER CERAMIC CAPACITORS 0402, 0603 & 0805 Sizes NP0 Dielectric RoHS Compliance *Contents in this sheet are subject to change without prior notice. Page of ASC_ HQ_Low ESR_(HH)_006N_AS Apr. 202 .
WW25Q ±1%, ±5%, 1W Metal plate low ohm power chip resistors Size 2512 (6432)
WW25Q ±1%, ±5%, 1W Metal plate low ohm power chip resistors Size 2512 (6432) Current Sensing Type Automotive AEC Q200 compliant *Contents in this sheet are subject to change without prior notice. Page
*Contents in this sheet are subject to change without prior notice.
MULTILAYER CERAMIC CAPACITORS Automotive Capacitor Arrays Series (MY) Qualified to 4 x 0402, 4 x 0603 Sizes NP0 & X7R Dielectrics Halogen Free & RoHS Compliance *Contents in this sheet are subject to change
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, X5R
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, 6.3 V TO 50 V 10 nf to 100 µf RoHS compliant Product Specification Product specification 2 Surface-Mount
DATA SHEET Metal Element Current Sensing Chip Resistor (Jumper) CLS Series
DATA SHEET Metal Element Current Sensing Chip Resistor (Jumper) 5% SIZE: 0805,1206 & 2512 RoHs Compliant January 19, 2017 V.5 DS-ENG-009 Page: 2 of 14 1. SCOPE 1.1 This specification is applicable to lead
MULTILAYER CERAMIC CAPACITORS Microwave Series (RF) to 1111 Sizes (6.3V to 1500V) NP0 Dielectric Halogen Free & RoHS Compliance
MULTILAYER CERAMIC CAPACITORS Microwave Series (RF) 01005 to 1111 Sizes (6.3V to 1500V) NP0 Dielectric Halogen Free & RoHS Compliance *Contents in this sheet are subject to change without prior notice.
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, Y5V
Product Specification January 12, 2016 V.6 DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, 6.3 V TO 50 V 10 nf to 47 µf RoHS compliant & Halogen Free
MLCC APPLICATION GUIDE
MLCC APPLICATION GUIDE 1/10 No. Process Condition 1 Operating Condition (Storage) 1) The capacitor must be stored in an ambient temperature between 5 ~ 40 with a relative humidity of 20 ~ 70%. The products
Capacitor Technology and Manufacturing Expertise
Capacitors Capacitor Technology and Manufacturing Expertise With more than 25 years of experience in manufacturing single layer capacitors made with EIA Class I, II and III ceramic dielectric materials,
Surface Mount Multilayer Chip Capacitors
Class 1 NP 1/16/25/5/ V FEAURES Ultra stable class 1 dielectric Four standard sizes High capacitance per unit volume Supplied in tape on reel For high frequency applications Ni-barrier with % tin terminations
E C K T H C K B
Ceramic Capacitors (Safety Regulations) For Surface Mounting s HC (Sub-Class Y1) FC (Sub-Class Y2) C (Sub-ClassY2 ) Features Resin molded SMD type for flow/reflow soldering (HC) and reflow soldering (FC,C)
Multilayer Ceramic Capacitors High Capacitance Series
Applications: Description: MLCC consists of a conducting material and electrodes. To manufacture a chip-type SMT and achieve miniaturization, high density and high efficiency, ceramic condensers are used.