Compact and highly reliable type available in many varieties. Typical Specifications. Output signal. Rating. Operating life

Transcription

1 1 11mm Size Compact and highly reliable type available in many varieties Typical Specifications Items Specifications ncoders Product Line Structure Horizontal configuration Length of the shaft (mm) Torque (mn m) 12± Number of detent Number of pulse 1 1 Output signal Two phase of, B Self-return switch (11 / 10B) m V C 1,000 cycles 0,000 cycles (1K / 1J) Operating temperature range 0 to +8 Push-on switch Travel of pushon switch(mm) (cycles) Minimum order uni t(pcs.) Japan xport 00 1,00 Product No. 1B12N 1B122Z 1B122B rawing No ± Flat BS 112G ± +3 ± ,000 1,0 2,00 12U 130C 102Q 112B ± ± 1G1 Less shaft wobble Serrated 2 8.± 12± G102 1G K00 1,000 2,000 1K10 Flat 12± ,000 1K020 1K120 1K021 1K1213 Note Other varieties are also available. Please inquire. Refer to P.282 for product specifications. Refer to P.283 for attached parts. Refer to P.28 for product varieties. Refer to P.31 for soldering conditions. 2

2 1/11mm Size Product Line Structure configuration Length of the shaft (mm) Torque (mn m) Number of detent Number of pulse Push-on switch Travel of push-on switch(mm) (cycles) Minimum order unit (pcs.) Japan xport Product No. rawing No. 1 1J00 1J10F 11 ncoders Reflow Push lock Flat -tooth Serrated ± (Initial) ± (fter reflow) ± , ,00 1J0211 1J1213 1J0203 1J T0 112U Self-return switch Flat 1 3 to Selfreturn switch ,000 1,0 2, H ual-shaft Innershaft=2 0. Outershaft=1 Slotted ± 1 Flat Innershaft=2 1. Outershaft=1 switch Self-return Slotted 3 to 1, ,00 1BB2C03 10B2LB01 1 Note Other varieties are also available. Please inquire. Packing Specifications Tray Number of packages (pcs.) Product No. 1 case /Japan 1 case /export packing xport package measurements (mm) 1B 00 1, / 1 / 1,0 2,00 1G / 1K 1,000 2, J T / U 800 1, ,0 2,00 10B / BB 00 1, Refer to P.282 for product specifications. Refer to P.283 for attached parts. Refer to P.28 for product varieties. Refer to P.31 for soldering conditions. 2

3 1 11mm Size No. imensions Photo Style PC board mounting hole dimensions (Viewed from mounting side) ncoders 1 1B Horizontal MG0.. ø B C 3-ø1 holes 1B Horizontal (travel 0.mm) G B Horizontal (travel 1.mm) B C G 2. -ø1 holes ummy ø1 holes 1 (travel 0.mm / 1.mm) 2. -ø1 holes 3.8 B C ø1 holes 28

4 1/11mm Size No. imensions Photo Style PC board mounting hole dimensions (Viewed from mounting side) 8 1G 1G (travel 1.mm) 1G (travel 1.mm) (.) 2. ummy ummy (.) 2 1. ummy terminal terminal 1. terminal. (.) ummy 1. terminal ø1. ø x (SW01) CHM (SW01) 0.x (SW01) CHM 3. (SW01) 3. 0.x 3. CHM 8± 3. 8± 8± 8± 2. ±0.03 ±0.03 ±0.03 ±0.03 ±0.03 ± ø ø ø 0 ±2 0 ±2 0 ± ±0.0 8±0.0 8±0.0 0 ±2 0 ±2 0 ± ±0.0 8±0.0 8±0.0 0.x (SW01) CHM 1. (SW01) (SW01) 0.x CHM ± ± 8± 8± 0 ±2 0 ±2 0 ± ±0.0 8±0.0 8±0.0.max..max x CHM.2 C B.2.2.max Switch travel 3.. (.). 2 (.) (.) (SW02) (SW02) (SW02) ø1. ø1. ø x (SW01) (SW01) CHM 3. 0.x 3. (SW01) CHM 8± 3. 8± 8± 8± ø (.) 2. (.). (SW02) (SW02) (SW02) ø ø ø1. ±0.03 ø1. ±0.03 ± ø1. 2. ±0.03 ø ±0.03 ±0.03 ø ø ø 2 (.) 0 ±2 ø ø 1 8±0.0 0 ±2 1 8±0.0 0 ±2.max..max. 0.x CHM (.) ±0.0.max..max..max..max. 0.x.2 CHM hole.0 hole R R0.8 Center of shaft.0 hole Center 1. of shaft R Center of shaft ø1 hole -ø1 hole -ø1 hole.0 hole.0 hole.0 12.hole 2-R R Center 1. of shaft Center of shaft R Center of shaft hole Center of shaft hole.0 hole Center of shaft Center of shaft ø1 hole -ø1 hole -ø1 hole R ø1 hole 1. 2-R0.8 2-R0.8 -ø1 hole 1. -ø1 hole 1. ncoders 1K 1K (travel 0.mm / 1.mm) ummy terminal (Switch02) () 2. () ø8. ø8.. ø. 0.or1.. ø K0 only 1. 1K R0.8 only 1..1hole R hole B C 1.B -ø1.0 hole 1K1C 2-R only -ø1.0 hole 1K1 2-R0.8 Black part : o not solder and only 11.3 no wiring for electrical contact. PC board mounting detail slant line part hows the solder land black part: o not solder and wiring for electrical 1K0contact only R0.8.1hole K1 only 2. C B 2. -ø1.0 hole 2-R0.8 Black part : o not solder and no wiring for electrical contact. 2

5 mm Size No. imensions Photo Style PC board mounting hole dimensions (Viewed from mounting side) ncoders J Reflow 1J Reflow (travel 0.mm / 1.mm) 112T Push-lock mechanism (ummy terminal) (Switch02) ummy terminal () 2. ().1 ø8. ø8. 2 ø.. 0. or 1. ø Total travel Lock travel. max R0.8 1J1-1.3 C B only R0.8 1J1 slant line part:the solder only land Black part: o not 1.solder and wiring for electrical contact PC board mounting detail slant line part hows the solder land black 1J0 part: o not solder 13 only and 1J0 wiring for 2-R0. electrical 12.. contact only.3 2-R0..1hole hole ø. hole C B C B 2-R J1 only 2-R0.8 1J1 1. only 1. slant line part:the solder land Black PC part: board o mounting not solder detail and wiring for electrical slant line contact part hows the solder land black part: o not solder and wiring for electrical contact R R0..1Hole.1Hole J0 1J0 only only ummy ± 3. teeth Serrated teeth Serrated 0 ± ø1 holes ø±0.0 ø8± U Push-lock mechanism with push-lock switch. (Switch02) Total travel Lock travel. max teeth Serrated.2 8± teeth Serrated 0 ± ø1 holes ø±0.0 ø8±

6 1/11mm Size No. imensions Photo Style PC board mounting hole dimensions (Viewed from mounting side) 11 Self-return switch 12. ummy ncoders CB -ø1 holes 11 Self-return switch (travel 0.mm / 1.mm) 1 CB -ø1 holes 1 1 ual-shaft type (travel 0.mm) Inner shaft: encoder Outer shaft: encoder 2. ' C' B' CB 8-ø1 holes 1 ual-shaft type (travel 1.mm) Inner shaft: encoder Outer shaft: self-return switch (Switch03) ø (Switch02) ø3. ø C0. C0.. max. 11. ' C' B' ' C' B' CB ø1 holes 281

7 1 11mm Size Output Wave 1B / 1 / 1G 1 / 1J / 1K ncoders Sliding Noise 1B, 1, 1G detents, 1 pulse signal B signal OFF OFF ON etent stability position CW direction ON etent stability position cannot be specified for B signal. 1 detents pulse 1 3 detents pulse 1J, 1K signal B signal CW direction OFF OFF ON ON etent stability position Test circuit V C R R Terminal Terminal B ncoder Terminal C /s V Output waveform t t V1 V2 ON OFF ON Sliding direction t : Masking time to avoid chattering 1B 1 / 1G 1J / 1K V 1 =V 2 =1.V max. t R = kω Chattering:2ms max. Bounce :2ms max. V 1 =V 2 =1.V max. t R = kω Chattering:3ms max. Bounce :2ms max. V 1 =V 2 =2.V max. t R = kω Chattering:3ms max. Bounce :2ms max. Circuit iagram 11/1OB 11mm Size / ttached Parts The following parts are included with the product. 1B Series Nut Washer ø12 ø.2 282

8 11mm Size / Product Varieties imensions 1. Single-shaft 1)Serrated 1 Style ( diameter:φ) Not applicable for 1 and 1G with push-lock mechanism LB L1 R2 R1 0. or 1 teeth Serrated etailed dimensions L 1 2 L B R 1 R 2 S ncoders 1K / 1J Style ( diameter:φ) LB L1 0. l1 teeth Serrated ø etailed dimensions L 1 L B R 1 1 ø8. 1G Style ( diameter:φ). LB L L1 8 1 ø S1 ø etailed dimensions L L 1 L B C0. 2)Flat 1 Style ( diameter:φ) 1K / 1J Style ( diameter:φ.) R R etailed dimensions L 1 L B R () (12) oes not comply with 11 2 LB= for 1B. Values in parentheses apply to products without push-on switch. etailed dimensions L 1 L B R 1 Notes 1. The highlighted figures in shaft types refer to Product Specifications in P.2 and P Other varieties are also available. Please inquire. 283

9 11mm Size / Product Varieties imensions 1. Single-shaft 3)Slotted ncoders 1 Style ( diameter:φ) 1K / 1J Style ( diameter:φ.) etailed dimensions L LB= for 1B etailed dimensions L 1 1 L B L B 2. Standard imensions and Configuration of ual-shaft Flat 1 Style (Inner-shaft :φ3. Outer-shaft :φ) etailed dimensions LB L2 L1 R2 R1 L 1 L 2 L B R 1 R ø 2. ø3. C0. C0. ø8 for type with inner / outer shaft encoders (1BB) Notes 1. The highlighted figures in shaft types refer to Product Specifications in P.2 and P Other varieties are also available. Please inquire. 28

10 11mm Size /Switch Specifications 1. 1B Series Contact arrangement Momentary push switch Travel(mm) ±0. Operating force ±3N ±2N lectrical 2,000 times,000 times Insulation resistance V C (00μ V C min. ratings) 0mΩ max. for initial period, 0mΩ max. after operating life. 0MΩ min. V C 0V C for 1 minute or V C for 2 second ncoders 2. 1/11 Series Contact arrangement Momentary push switch Travel(mm) 0.±0.3 1.± Operating force 2 N ±2N,000 times lectrical Insulation resistance V C (00μ V C min. ratings) 0mΩ max. for initial period, 0mΩ max. after operating life. 0MΩ min. V C 0V C for 1 minute or V C for 2 second 3. 1G Series Contact arrangement lectrical Momentary push switch Travel(mm) 1.±0.3 Operating force ±2N Insulation resistance,000 times V C (00μ V C min. ratings) 0mΩ max. for initial period, 0mΩ max. after operating life. 0MΩ min. V C 0V C for 1 minute or V C for 2 second. 1K/1J Series Contact arrangement lectrical Momentary push switch Travel (mm) 0.±0.3 1.±0. Operating force ±2N ±2N 1,000,000 times 0,000 times Insulation resistance. 112U Series Contact arrangement lectrical V C (m V C min. ratings) 0mΩ max. for initial period, 0mΩ max. after operating life. 0MΩ min. V C 0V C for 1 minute or V C for 1 second Push lock mechanism switch Travel (mm) 8±0.8 Operating force Insulation resistance 8N max.,000 times V C (00μ V C min. ratings) 0mΩ max. for initial period, 0mΩ max. after operating life. 0MΩ min. V C 0V C for 1 minute or V C for 2 second 28

11 ncoders List of Varieties shaft mm size 11mm size Series C0 1B 1 1G Photo Output Incremental (Two phase and B ) ncoders types Single-shaft ual-shaft Single-shaft Operating direction Horizontal Number of pulse / Number of detent imensions (mm) 1 / Features / 1 / or without / 3 or without detent Push-lock mechanism W / or without Less shaft wobble H.. /. /.. 8 / 8.. Operating temperature range 0 to +8 1,000 cycles utomotive use Life cycle (availability) m V C lectrical Max./min. operating current(resistive load) Insulation resistance m / 1m 0MΩ min. V C Mechanical Rotational torque ( detent) 0V C for 1 minute or V C for 1s 0V C for 1 minute or V C for 2s + 3 mn m 8. ±mn m etent torque 8 ± m N m 12 ± m N m ± m N m 12 ± m N m Push-pull strength configuration Flat Flat, Slotted, Serrated Terminal type 0N Insertion I nn e r- sh a f t : F la t O u t e r- sh a f t : Sl o t t e d Serrated Contact arrangement Push-on switch Push-lock mechanism switch Push-on switch Travel (mm) 0.±0.3 1.± ±0. 0.±0.3 1.±0. 8±0.8 0.±0.3 1.±0. 1.±0.3 Switch Specifications Operating force (N) ±2 ±3 ± ±2 8 max ±2 ±2 m V C (1m V C min. ratings) V C (00μ V C min. ratings) 0mΩ max. for initial period; 0mΩ max. after operating life.,000 times 2,000 times,000 times,000 times,000 times Page 2 2 ncoders Soldering Conditions 31 ncoders Cautions 31 Notes 1. marked specification is only applicable to 112U Indicates applicability to all products in the series. 2

12 ncoders List of Varieties shaft 11mm size mm size Series 11 1K 1J M11B C MB ncoders Photo Output Self-return switch Incremental (Two phase and B) types Operating direction Single-shaft Number of pulse / Number of detent / 1/ 1/1 / 0/0 Features Surface Mount type Magnetic type Magnetic type imensions (mm) W H.. 13 Operating temperature range 0 to +8 to +8 to +80 to +0 1,000 cycles 0,000 cycles 1,000,000 cycles,000 cycles 00,000 cycles utomotive use Life cycle (availability) lectrical Mechanical m V C m V±% C 1m V C m V±% C Max./min. operating current (Resistive load) m / 1m 1m / - 1m / - Insulation resistance 0MΩ min. V C 0MΩ min.0v C MΩ min. 0V C 0MΩ min. V C Rotational torque ( detent) 0V C for 1 minute or V C for 2s 0V C for 1 minute or V C for 1s V C for 1 minute or 0V C for 2s 0V C for 1 minute or 0V C for 2s 0V C for 1 minute or V C for 2s 3 to mn m mn m max. etent torque 12±mN m Push-pull strength 12±mN m (Initial) ±mn m (fter reflow) 0N ±mn m 0±mN m 8±mN m configuration Flat, Slotted, Serrated Flat Terminal type Insertion Reflow Insertion Contact arrangement Push-on switch Switch Specifications Travel (mm) 0.±0.3 1.±0. 0.±0.3 1.±0. 0.±0.3 1.± ± Operating force (N) 2 ±2 ±2 ±2 ±2 ±2.±3 ±2 ±3 V C (00μ V C min. ratings) V C (m V C min. ratings) m V C (0m 12V C max. ratings) 0. 1V C (1m 1V C min. ratings) 3 1V C (m 1V C min. ratings) 0mΩ max. for initial period, 0mΩ max. after operating life. 00mΩ max. for initial period, mω max. after operating life. 0mΩ max. for initial period, 0mΩ max. after operating life.,000 times 1,000,000 times 0,000 times 1,000,000 times 0,000 times 1,000,000 times,000 times 2,000 times Page ncoders Soldering Conditions 31 ncoders Cautions 31 Note Indicates applicability to all products in the series.

13 ncoders Soldering Conditions Reference for Manual Soldering Series Tip temperature Soldering time No. of solders C0, C0, C, 11, 1B, 1, 1G, 1K, 2, 2, C, C21, C28, C3, C3H, C3B, C0, C, C0, C0B, M11B, MB, C21C, C28C, C3CH 1J max. 3s max. 1 time ± +1 3 s 0 2 times ncoders Reference for ip Soldering Series C0, 1B, 11, 1, 1G, 1K, C, C21, C28, C3, C3H, C3B, C0, C0B C, 2, 2, M11B Soldering temperature Heating time Soldering temperature Soldering time No. of solders 0 max. 2 min. max. ± ±1s 2 times max. 0 max. Preheating 1 min. max. ± ip soldering 3±1s 2 times max. C0 1 max. 1 min. max. max. s max. 1 time C MB 0 max. 80 max. 2 min. max. 1 min. max. max. max. s max. 3s max. 2 times max. 2 times max. xample of Reflow Soldering Condition Temperature profile Temperature ( C ) B C Room temperature Time (s) Pre-heating max. F max. G max. H max. 1J Series B C F G H No. of reflows min. max. 3s 0s min. max. 2 times max. C0 min. 2 min. 0 0s to 1s s to 0s 2 times max. C21C 2 to s to 1s 2s to 0s 0s max. 1 time max. C28C, C3CH min. min. 3s 0s 2s max. 1 time max. 注記 1. When using an infrared reflow oven, solder may sometimes not be applied. Be sure to use a hot air reflow oven or a type that uses infrared rays in combination with hot air. 2. The temperatures given above are the maximum temperatures at the terminals of the encoder when employing a hot air reflow method. The temperature of the PC board and the temperature of the encoder may vary greatly depending on the PC board material, its size and thickness. nsure that the temperature of the encoder does not rise to or greater. 3. Conditions vary to some extent depending on the type of reflow bath used. Be sure to give due consideration to this prior to use. 31