Tolerance. Value 2020 = +/- 20% 3030 = +/- 30% (See note 5) (See note 4) Taper. A = Linear B = Log. C = Alog. (See note 10) Others tapers on request
|
|
|
- Erick McDonald
- 5 years ago
- Views:
Transcription
1 Bushless version P- FETURES mm arbon Potentiometer arbon resistive element Dust proof enclosure Polyester substrate Modular gang type (up to ) Self extinguishable material U -V0 Upon request: Metalic support Stereo matching Switch Nut & washer Bushless option available MEHNI SPEIFITIONS Mechanical rotation angle: 00 ± Electrical rotation angle: ± Torque: 0. to. Ncm. (0.7 to 2. in-oz) Stop torque: > 0 Ncm. ( > in-oz) Max. torque nut (binding out): < 0 Ncm. ( in-oz) Thrust and pull in the shaft: > 2 N EETRI SPEIFITIONS Range of values (*) Tolerance (*): ± % ± 0% Max. Voltage: VD (lin) VD (no lin) Nominal Power 0 (2 F) (see power rating curve) 0.2 W (lin) 0. W (no lin) Taper (*) (og. & log. only Rn > K) in ; og; log. Residual resistance(*): Equivalent Noise Resistance: Operating temperature**: ( F + F) * Others upon request ** Up to depending on application HOW TO ORDER STNDRD OPTION EXTRS P- D H I M0 0 Serie P- Model S =Single D =Tandem T =Triple =Quad. NOTES: Mounting style H= Horizontal V = Vertical (See note ) Bushing diameter 07 = M7 = M S = Bushless (See note 2) Terminals I = PB = Solder ugs Shafts M0 M0 M07 M M7 P0 P (See note ) Value (See note ) Taper = inear B = og. = log. (See note ) Others tapers on request NOTE: The information contained here should be used for reference purposes only. Tolerance = +/- % 00 = +/- 0% (See note ) Shafts spec. leng. XX.X (See notes,) Mounting brackets M M2 (See note 7) Stereo matching D = db D = db D = db (See note ) Switch I = PB = Solder lugs (See note ) Nuts & Washers -T = loose nut & washer MT=assembled nut & washer -T- = loose nut MT- = assembled nut (See note ) () Mounting style: Type "V" is only available in model "S" potentiometer and with printed circuit terminals. (2) Bushings: Type "" has two paralell flat surfaces for avoiding rotation. Bushless option only available for single model. () M07 shaft is only available with M bushing. --- = no shaft () Value: ode: Number of zeros 2 first digits of the value. In models "D", "T", "", with different values, they will be asked by drawings. () Tolerance (non standard), upon request. Example: +7% ode: % negative tolerance () Shaft special length: positive tolerance Only for special length and plain shafts (not knurled). Example: Shaft Ø. = 2. M NOTE: Maximun length recommended: = special length (7) Mounting brackets: Only applicable for model "S", mounting "H" and without switch. shafts () Stereo matching: not available for single models. Maximun will be: db for model "D" db for model "T" db for model "" () Not available for Bushless version. () Switch option not available with antilog taper.
2 HOW TO ORDER USTOM DRWING P- S V + DRWING NUMBER (Max. digits) This way of ordering should be used for options which are not included in the "How to order" standard and optional extras. MODES M x E S. STNDRD OPTIONS Shaft length... 0 Standard ength Mounting brackets... Without mounting brackets Stereo matching... Only on request (see note ) Switch... No switch Nut & washer... Without nut and washer PIHE M x 0.7 S E = Initial S = Wiper E = Final S D T P- S/D/T/..H... P- SV... METI SUPPORT P- SH...M P- SH...M2 0. M x 0.7. M x 0.7. M x BUSHINGS 0. M7 x EXMPES OF BUSHESS VERSION thickness = 0. 70
3 TERMINS Hole for heat dissipation (do not solder) Hole for heat dissipation (do not solder) Hole for wiring I TPERS POWER RTING URVE NUTS & WSHERS Standard Bushing Bushing 07 = inear W (%) B = og. = log B E % 0 % M x M7 x NOTE = Please note relative terminal positions when ordering non linear tapers. TESTS EETRI IFE MEHNI IFE : POT.* SWITH ; 0.2 W (- PM).000 (, 0 V). PB TERMIN -0.2 M x SODER UG TERMIN TYPI VRITIONS ± % ± % (Rn < M ) TEMPERTURE OEFFIIENT 2 ; +70 ±00 ppm/ O (Rn <0 K ) THERM YING ; 2 ±2. % DMP HET 00 % HR ± % VIBRTION (for each plane X,Y,Z) 2 Hz.... Hz. ±2 % (*) only applicable to values K. For lower values please consult. SWITH M x P-S... H... I / +0.. P-SV... I 7
4 SWITH SPEIFITIONS NOMIN URRENT ONTT RESISTNE (initial) OPERTING TORQUE OPERTING NGE TEST VOTGE PKGING Boxes of 0 pieces (single body model): Inner dimensions x x mm METI SHFTS STNDRD ODE M0 M M07 B ODE B 2 7 M 2 M 2 M 0 M M 0 M SPEI M PSTI SHFTS Ø.. PSTI SHFTS Ø +0. P0.. 0 o 0 o P0 P02 P0 72
5 PSTI SHFTS Ø o 22,. +0. P0 +0. P0. 0 o P. 7 o P o P P P ±0. P P0 P0 PSTI SHFTS Ø o P07 7 o o P P o P. +0. P +0. P. +0. P NOTE: Shaft position shown full W. ny other position for plastic shafts has to be shiftted n times 2 Other positions upon request.. 2 ±0. P22 7
Tolerance. Value 2020 = +/- 20% 3030 = +/- 30% (See note 5) (See note 4) Taper. A = Linear B = Log. C = Alog. (See note 10) Others tapers on request
Bushless version P- FETURES mm arbon Potentiometer arbon resistive element Dust proof enclosure Polyester substrate Modular gang type (up to ) Self extinguishable material U -V0 Upon request: Metalic support
T-21 FEATURES. Taper. A= linear B= Log. C= Alog. (See note 10) Other tapers on request. Value. (See note 4)
T- FETURES mm arbon Potentiometer arbon resistive element. High mechanical endurance. Upon request: Detents Stereo matching Switch MEHNI SPEIFITIONS Mechanical rotation angle: ± Electrical rotation angle:
FEATURES. Tolerance. Value 2020 = +/- 20% 3030 = +/- 30% (See note 5) (See note 4) Taper. A = Linear B = Log. C = Alog.
Bushless version MHNIL SPIFITIONS Mechanical rotation angle: 300 ± lectrical rotation angle: ± Torque: 0. to. Ncm. (0.7 to 2. in-oz) Stop torque: > 0 Ncm. ( > in-oz) Max. torque nut (binding out): < 0
T-16 FEATURES. Taper. A= linear B= Log. C= Alog. (See note 10) Others laws upon request. Tolerance 2020= +/-20% 3030= +/-30% (See note 5)
T-6 FTUR 6 mm arbon Potentiometer arbon resistive element. High mechanical endurance. Upon request: etents tereo matching witch Nut & washer MHN PFTON Mechanical rotation angle: 300 ± lectrical rotation
FEATURES. Detents. Life PAI PAM PAF P1I P1F P02.. E= Long life U= Extra Long life. (See note 5) P38. Cut track. PCI = Initial PCF= Final
MEHNI SPEIFITIONS Mechanical rotation angle: 2 ± 20º ± º available under drawing (blue housing only) Electrical rotation angle: 20 ± 20 Torque: 0. to 2. Ncm. (0. to 3. in-oz) Stop torque: > Ncm. ( >1 in-oz)
Detents. Life PAI PAM PAF P1I P1F P02.. E= Long life U= Extra Long life. (See note 5) P38. Cut track. PCI = Initial PCF= Final
MEHNI PEIFITION Mechanical rotation angle: 2 ± 20º ± º available under drawing (blue housing only) Electrical rotation angle: 20 ± 20 Torque: 0. to 2. Ncm. (0. to 3. in-oz) top torque: > Ncm. ( >1 in-oz)
A = Lin. B = Log. C = Alog. Tolerance 3030 = ± 30% 2020 = ± 20% 1010 = ± 10% 0505 = ± 5% (See note 2) Example: +17% -15%
PSC-0 MIN FETURES 0mm SMD cermet Potentiometer Specifically designed for leadfree reflow soldering processes (excellent performance). Cermet resistive element. IP4 protection according to IEC 609. Plastic
16mm Size Metal Shaft Type
Potentiometer 6mm Size Type RK63 Series A wide range of versatility products applicable for various types of control. Typical Specifications Items Total tolerance Maximum operating voltage Total rotational
FEATURES. Max. Voltage: 250 VDC (lin) 125 VDC (no lin) Long Life. 01 Fig. 1. E= Long life. (See note 5) Tolerance. Detents
MHNI SPIFITIONS Mechanical rotation angle: 2 ± lectrical rotation angle: 20 ± 20 Torque: 0. to 2. Ncm. (0. to 3. in-oz) Stop torque: > Ncm. ( > in-oz) ife*: Up to K cycles PT- FTURS TRI SPIFITIONS Range
Cal-Chip Electronics, Incorporated TC Series Tantalum Solid Electrolytic Capacitors - Resin Molded Chip Type, Standard Type
: The T Series is designed for hybrid circuit and low profile printed circuit board applications where inductance is to be minimized, or where substrate space is at a premium. They can be attached to substrates
3/8" Square Panel Potentiometer Miniature - Cermet - Fully Sealed
P0 /8" Square Panel Potentiometer Miniature - Cermet - Fully Sealed P0 panel potentiometer combines the very good setting stability offered by trimmers (due to their proprietary multifinger wiper), with
Life. E= 10K cycles. (See note3) Tolerance = + 30% 2020 = + 20% 1010 = + 10% 0505 = + 5% (See note 2)
MHNIL PIFITION Mechanical life*: Up to 10k cycles. Mechanical rotation angle: 2 ± lectrical rotation angle: 240 ± 20 Torque: 0. to 2. Ncm. (0.7 to 3.4 in-oz) top torque: > 10 Ncm. ( >14 in-oz) HOW TO ORDR
3mm Surface Mount, Single-Turn, Sealed Cermet Trimmers
TOCOS POTENTIOMETERS 3mm Surface Mount, Single-Turn, Sealed Cermet Trimmers RoHS Compliant IMPROVED DESIGN Pb-Free and Cd-Free Features 3mm square SMD, single-turn, sealed cermet trimmers Available in
PTF Series Long Life Slide Potentiometer
*RoHS COMPLIANT Features Long life carbon element Assortment of resistance tapers 45 mm, 60 mm and 00 mm travel lengths Single and dual gang elements Long operational life Tracking error within ± db PTF
DIM. A (+ 0,05 0,51) .135 ±.015 (3,43 ± 0,38) COMMON LUG INTEGRAL ASSEMBLY NUT, DO NOT REMOVE 1/4-32 UNEF-2A THREAD
Multi-Deck SERIES 0 SERIES 0 0." Diameter, / Amp, Standard, Military SR FEATURES Proven Quality in Thousands of Applications Gold-plated Contact System 0,,, 0 and 0 Angle Options MIL Qualified Versions
1/4 Square, Single-Turn, Through-Hole Sealed Cermet Trimmers. Environmental
TOCOS POTENTIOMETERS 1/4 Square, Single-Turn, Through-Hole Sealed Cermet Trimmers Features 1/4 square, single-turn, through-hole, sealed cermet trimmers Top and side adjust styles available Larger diameter
10 mm carbon potentiometer PT10
0 mm carbon potentiometer PT0 Main features Carbon resistive element. Dust proof enclosure. Polyester substrate. Wiper positioned at initial, 0% or fully clockwise. Mechanical specifications Mechanical
Insulated shaft type with a wide variety of applications. Typical Specifications. Rating. Operating life. Operating temperature range.
ECE ECD mm Size shaft type with a wide variety of applications Typical Specifications Items Specifications Rating Operating life Without detent With detent 0.m V DC m V DC,000 cycles 0,000 cycles (Lightest
9mm Size Metal Shaft Multi-ganged Type. Typical Specifications. Total resistance tolerance ±20% Maximum operating voltage
K09 9mm Size Multi-ganged 9.mm width potentiometer ideal for various s of control Typical Specifications Items Specifications tolerance ±% Maximum operating voltage 0V C, V DC Total rotational angle 3
Vishay Dale Wirewound Resistors, Military, MIL-PRF Qualified, Type RE, Aluminum Housed, Chassis Mount FEATURES RESISTANCE RANGE 18546
RH, NH FETURES Molded construction for total environmental protection omplete welded construction Meets applicable requirements of MIL-PRF-18546 vailable in non-inductive styles (type NH) with ryton- Perry
Scalloped Square Square Model (Width) # of Resistors Circuit Industry Size Convex Convex Concave
MODE N SERIES N Series Thick Film hip Resistor rrays RoHS ompliant MODE STES Edge Finish / Termination Scalloped Square Square Model (idth) # of Resistors ircuit Industry Size onvex onvex oncave Model
5 mm Square Surface Mount Miniature Trimmers Multi-Turn Cermet Sealed
5 mm Square Surface Mount Miniature Trimmers Multi-Turn Cermet Sealed DESIGN SUPPORT TOOLS Models Available click logo to get started FEATURES 0.5 W at 70 C Professional and industrial grade Wide ohmic
MODEL BCN SERIES. Thick Film Chip Resistor Arrays. 4-5 Model BCN Series
MODE N SERIES Thick Film hip Resistor rrays MODE STES Edge Finish / Termination Scalloped Square Square Model (idth) # of Resistors ircuit Industry Size onvex onvex oncave Model N 102 (1.0mm) 2 Isolated
Fully Sealed Container Cermet Potentiometer Professional Grade
Fully Seled Continer Cermet Potentiometer Professionl Grde Their exellent performnes re due to the use of ermet-trk seled in lrge se. interhngeility with RV6, omined with the exellent stility of its rted
Selector Switch Type 06
Seletor Swith Type 0 Compat and versatile positions multi wafer seletor swith,000 swithing yles with up to.0 Nm swithing torque Gold plated ontats: miron Roust metal housing with metal shaft Operating
Compact and highly reliable type available in many varieties. Typical Specifications. Output signal. Rating. Operating life
1 11mm Size ompact and highly reliable type available in many varieties. Typical Specifications Output signal Items Specifications Two phase of, B Three phase of, B and (1H) Self-return switch (11 / 10B)
HARTING D-Sub Selection Guide
HARTING D-Sub Selection Guide People Power Partnership D-Sub Selection Guide D-Sub Device Connectivity HARTING Connectivity & Networks generates solutions throughout the triad of Installation Technology,
Power Resistor for Mounting onto a Heatsink Thick Film Technology
Power Resistor for Mounting onto a Heatsink Thick Film Technology DESIGN SUPPORT TOOLS click logo to get started FEATURES 300 W at 85 C bottom case temperature Wide resistance range: 0.3 to 900 k E24 series
Chip Trimmer Potentiometer
Chip Potentiometer RH0/RH0 Series A general purpose, compact, and low-profile type that is suitable for a wide range of applications. Car Use Features Conforms to JIS C 0806- (Packaging of surface mount
Power Resistors for Mounting Onto a Heatsink Thick Film Technology
Power Resistors for Mounting Onto a Heatsink Thick Film Technology DESIGN SUPPORT TOOLS click logo to get started FEATURES 1% tolerance available High power rating = 200 W Wide ohmic value range = 0.046
C V S T B T 1 0 ( )
SLIDE SINGLE SWITCHES TURN WIREWOUND ( mm TRIMMERS PITCH) -6/- -T 6 FEATURES Lowest profile design of. mm Fine pitch of mm Easy motion with knob height of 0. mm 6 Part Part name name Material Material
Insertion-type Trimmer Potentiometer Bulk
type PotentiometerBulk RH0 Series A mm size that is suitable for a wide range of applications for consumer/industry equipment. Car Use Features Applications Available for a wide range of applications.
Miniature Toggle Switches
E L TCT IP PUSH BUTT SLIE ROCKER TOGGLE INEX SPECIFICTIS CTCT RTING: @ VC or VC (Q contact) ELECTRICL LIFE:0,000 make-and-break cycles at full load CTCT RESISTNCE: 0 m max. initial @- VC,00 m INSULTI RESISTNCE:,000
SM-3/31 SURFACE MOUNT CERMET TRIMMERS. S M - 3 T W 1 k ( ) FEATURES PART NUMBER DESIGNATION
SURFCE MOUNT CERMET TRIMMERS SM-/ RoHS compliant INTERNL STRUCTURE 6 9 8 7 FETURES 6 7 8 9 Part name Housing Base element Electrode Resistive element dhesive Wiper Terminal pin Rotor gear Shaft Material
PTL Series Slide Potentiometer w/led
*RoHS COMPIANT Features n Carbon element n Red, orange, green, amber and white colors n Center detent option n Assortment of resistance tapers n Various travel lengths n Various lever sizes PT Series Slide
selector switch type 06
seletor swith type 0 main features ompat and versatile 2 positions multi wafer seletor swith Compat and versatile 2 positions multi wafer seletor swith 2,000 swithing yles with up to.0 Nm swithing torque
SM-42/43 SURFACE MOUNT CERMET TRIMMERS S M - 4 T W Ω ( ) FEATURES PART NUMBER DESIGNATION. RoHS compliant
SURFCE MOUNT CERMET TRIMMERS RoHS compliant FETURES RoHS compliant Fine adjustment is available utomatic mounting is available (Taping) Reflow soldering is available Sealed construction (Washable) INTERNL
SM-42/43 SURFACE MOUNT CERMET TRIMMERS S M - 4 T W Ω ( ) FEATURES PART NUMBER DESIGNATION
SURFCE MOUNT CERMET TRIMMERS RoHS compliant INTERNL STRUCTURE 9 8 7 FETURES 7 8 9 Part name Material Flammability Housing Polyphenylenesulphide UL9V- Base element Ceramic Electrode g-pd cermet Resistive
50 W Power Resistor, Thick Film Technology, TO-220
50 W Power Resistor, Thick Film Technology, TO-220 DESIGN SUPPORT TOOLS click logo to get started FEATURES 50 W at 25 C heatsink mounted Adjusted by sand trimming Leaded or surface mount versions High
RATIOMETRIC, LINEAR HALL-EFFECT SENSORS
UGN3503 HLL EFFECT SENSOR The UGN3503LT, UGN3503U, and UGN3503U Hall-effect sensors accurately track extremely small changes in magnetic flux density changes generally too small to operate Hall-effect
Minimum lever wobble and high precision characteristics combined with good operational feel.
for Fader Control of s Master Type K Fader RS K Series Minimum lever wobble and high precision characteristics combined with good operational feel. Typical Specifications Items tolerance Specifications
Provides a superior operational feel with high-speed tracking in motor drive mode.
for Fader Control of s Motor-driven Master TypeMotor N Fader, Motor K Fader RSNM/RS0KV Series Provides a superior operational feel with high-speed tracking in motor drive mode. Features Motor driven, low-profile
Rotary Switches AC09, 16 and 32
09, 16 and 32 igital code output type escription FUJI series rotary switches offer a wide choice of output codes. They feature sliding u-flashed contacts for high contact reliability. Inhibitor and parity
Power Resistor for Mounting onto a Heatsink Thick Film Technology
DIMENSIONS in millimeters Power Resistor for Mounting onto a Heatsink Thick Film Technology FEATURES 300 W at 85 C bottom case temperature Wide resistance range: 0.3 Ω to 900 kω E24 series Non inductive
SM-42/43 SURFACE MOUNT CERMET TRIMMERS COPAL ELECTRONICS S M - 4 T W Ω ( ) FEATURES PART NUMBER DESIGNATION.
SURFCE MOUNT CERMET TRIMMERS RoHS compliant INTERNL STRUCTURE 9 8 7 FETURES Lead-free soldering, Cadmium-free Fine adjustment is available utomatic mounting is available (Taping) Reflow soldering is available
SM-42/43 SURFACE MOUNT CERMET TRIMMERS S M - 4 T W Ω ( ) FEATURES PART NUMBER DESIGNATION. RoHS compliant
SURFCE MOUNT CERMET TRIMMERS RoHS compliant INTERNL STRUCTURE 9 8 7 FETURES RoHS compliant Fine adjustment is available utomatic mounting is available (Taping) Reflow soldering is available Sealed construction
Power Resistor for Mounting onto a Heatsink Thick Film Technology
DIMENSIONS in millimeters Power Resistor for Mounting onto a Heatsink Thick Film Technology FEATURES LPS high power: 1 W Wide resistance range: 1 Ω to 1.3 kω E24 series Non inductive Easy mounting Low
Power Resistor for Mounting onto a Heatsink Thick Film Technology
Power Resistor for Mounting onto a Heatsink FEATURES 1 % tolerance available High power rating = 200 W Wide ohmic value range = 0.046 Ωto 1 MΩ Non inductive Easy mounting Low thermal radiation of the case
Multi-Turn Surface Mount 1/4" Square Cermet Trimmers, Fully Sealed
www.vishy.om Vishy Sfernie Multi-Turn Surfe Mount /4" Squre Cermet Trimmers, Fully Seled The multiturn trimmer hs een designed for use in PCB surfe mounting pplitions. Three vritions re ville ording to
ST-32 SURFACE MOUNT CERMET TRIMMERS (SINGLE TURN) S T E T A ( 1 2 ) FEATURES PART NUMBER DESIGNATION
SURFACE MOUNT CERMET TRIMMERS (SINGLE TURN) ST- RoHS compliant INTERNAL STRUCTURE 7 6 5 4 9 8 FEATURES 4 5 6 7 8 9 Part name Wiper Cover Housing Terminal pin Base element O ring Rotor Electrode Resistive
Base S C T B
OPAL ELETRONIS ROTARY ODED SWITHES S-00/2000 RoHS compatible INTERNAL STRUTURE S-00 / 2000 series 4 2 3 6 FEATURES Lead-free soldering Fine click with metallic spring Low profile of 3.9 mm makes perfect
Power Resistor for Mounting onto a Heatsink Thick Film Technology
DIMENSIONS in millimeters Power Resistor for Mounting onto a Heatsink Thick Film Technology FEATURES 800 W at 85 C bottom case temperature Wide resistance range: 0.3 Ω to 900 kω E24 series Non inductive
100 pf to 47µF RoHS compliant & Halogen free
Product Specification August 7, 2017 V.4 DATA SHEET SURFACE MOUNT MULTILAYER CERAMIC CAPACITORS General purpose class II X6S 4 V TO 50 V 0 pf to 47µF RoHS compliant & Halogen free 2 SCOPE This specification
AUTOMOTIVE CURRENT TRANSDUCER OPEN LOOP TECHNOLOGY HC5FW 500-S
AUTOMOTIE CURRENT TRANSDUCER OPEN LOOP TECHNOLOGY Introduction The HC5FW family is for the electronic measurement of DC, AC or pulsed currents in high power and low voltage automotive applications with
Power Resistor Thick Film Technology
Power Resistor Thick Film Technology DESIGN SUPPORT TOOLS click logo to get started FEATURES 50 W at 25 C case temperature heatsink mounted Direct mounting ceramic on heatsink Broad resistance range: 0.010
Absolute encoders multiturn
elektronischer electronic multiturn, Multiturn, magnetic magnetisch Sendix M66 / M68 (shaft / hollow shaft) The Sendix M6 with Energy Harvesting Technology is an electronic multiturn encoder in miniature
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, X7R
Product Specification May 26, 2015 V.12 DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, 6.3 V TO 50 V 100 pf to 22 µf RoHS compliant & Halogen Free Product
Metal Case Hermetically-Sealed Metalized Polyester-Film Capacitors
Type 28P Metal Case Hermetically-Sealed Metalized Polyester-Film Capacitors EECTRICA SPECIFICATIONS Operating Temperature: -55 C to +25 C Capacitance Range: 0.00 μf to 2.0 μf Voltage Range: 00 VC to 400
3/8" Square (10 mm) Multi-Turn Cermet Trimmer
www.vishy.om 3/8" Squre ( mm) Multi-Turn Cermet Trimmer FEATURES Industril grde W t 70 C Vishy Spetrol Tests ording to CECC 400 or IEC 60393-1 Contt resistne vrition < 2 % Mteril tegoriztion: for definitions
SHENZHEN MOTTO TECHNOLOGY CO., LTD
-V2 20.11.26 Page : 1 Features & pplication: Product Structure * SMD Drum he for power line / signal line of various size SMD DIP Shield Unshield * ow Profile even 3x3x1.4 mm and low cost * To help you
Compact and highly reliable type available in many varieties. Typical Specifications. Output signal. Rating. Operating life
1 11mm Size Compact and highly reliable type available in many varieties Typical Specifications Items Specifications ncoders Product Line Structure Horizontal configuration Length of the shaft (mm) Torque
30 W Power Resistor Thick Film Technology
30 W Power Resistor Thick Film Technology LTO series are the extension of RTO types. We used the direct ceramic mounting design (no metal tab) of our RCH power resistors applied to semiconductor packages.
AUTOMOTIVE CURRENT TRANSDUCER OPEN LOOP TECHNOLOGY HC5FW 200-S/SP1
AUTOMOTIE CURRENT TRANSDUCER OPEN LOOP TECHNOLOGY HC5FW 200-S/SP1 Introduction The HC5FW family is for the electronic measurement of DC, AC or pulsed currents in high power and low voltage automotive applications
DATA SHEET ARRAY CHIP RESISTORS YC/TC 164 (8Pin/4R; Pb Free) 5%, 1% sizes
DATA SHEET ARRAY CHIP RESISTORS 164 (Pin/4R; Pb Free) 5%, 1% sizes 4 0603 Supersedes Date of Mar. 06, 2003 2 SCOPE This specification describes YC164 (convex) and TC164 (concave) series chip resistor arrays
Surface Mount Power Resistor Thick Film Technology
Surface Mount Power Resistor Thick Film Technology DESIGN SUPPORT TOOLS click logo to get started Models Available FEATURES AEC-Q200 qualified 35 W at 25 C case temperature Surface mounted resistor - TO-263
MKP.g. 1.0 Rated Values and Operational Data
Applications DC and AC voltages Professional Applications Tuned circuits, filters, timers Integrators, S/H Coupling / decoupling, audio Instrumentation Main Characteristics Dry film-foil based technology
Power Resistor for Mounting onto a Heatsink Thick Film Technology
DIMENSIONS in millimeters Power Resistor for Mounting onto a Heatsink Thick Film Technology FEATURES LPS high power: 1 W Wide resistance range: 1 Ω to 1.3 kω E24 series Non inductive Easy mounting Low
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, X7R
Product Specification May 12, 17 V.18 DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, 6.3 V TO 50 V 100 pf to 22 µf RoHS compliant & Halogen Free Product
Low-profile Master Type (Slim Type) The thinnest possible body contributes to reduced size, height and weight of the set product
RS NS Low-profile Master Type (Slim Type) The thinnest possible body contributes to reduced size, height and weight of the set product Typical Specifications Items Specifications tolerance ±0% Maximum
Up to 4 Poles on 1 Deck Up to 16 Positions Per Switch PC or Solder Lug Termination Positive Shaft Grounding for EMI/RFI Shielding GRAYHILL
SERIES 0 SERIES 0." iameter, 00m,.9" ehind Panel FETURES Optional Complete Seal for PC oard ssembly and Cleaning Small /" iameter Choice of., 0,,, 0 and ngles Up to Poles on eck Up to Positions Per Switch
DATA SHEET SURFACE MOUNT MULTILAYER CERAMIC CAPACITORS General purpose & High capacitance Class 2, X5R
Product Specification DATA SHEET SURFACE MOUNT MULTILAYER CERAMIC CAPACITORS General purpose & High capacitance Class 2, 4 V TO 50 V 100 pf to 220 µf RoHS compliant & Halogen free Product specification
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, Y5V
Product Specification January 12, 2016 V.6 DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, 6.3 V TO 50 V 10 nf to 47 µf RoHS compliant & Halogen Free
Protected. Main specifications. Additional specifications. Product adaptations
Protected 83 06 Double break switching Options for operation in stable positions Choice of actuators and fixing positions Main specifications Standard 83 06 0 stable lever positions 83 06 4 stable plunger
DATA SHEET. SURFACE MOUNT MULTILAYER CERAMIC CAPACITORS General purpose & High capacitance Class 2, X5R. 4 V TO 50 V 100 pf to 100 µf
Product Specification March 31, 2014 V.17 DATA SHEET SURFACE MOUNT MULTILAYER CERAMIC CAPACITORS General purpose & High capacitance Class 2, 4 V TO 50 V 100 pf to 100 µf RoHS compliant & Halogen free Product
NR ROTARY RING TABLE: FLEXIBLE IN EVERY RESPECT
NR FREELY PROGRAMMABLE ROTARY TABLES NR ROTARY RING TABLE All NR rings allow customer-specific drive motors to be connected NR ROTARY RING TABLE: FLEXIBLE IN EVERY RESPECT WHEN IT S GOT TO BE EXACT We
Thick Film Chip Resistors (CR, CJ Series)
Thick Film hip Resistors (R, J Series) Structure and material D E Features Low Noise Nickel arrier Terminations pplication General Purpose ode Structure Material oating Glass or Epoxy Resistor RuO2 Resistor
RF Power Feed-Through Capacitors with Conductor Rod, Class 1 Ceramic
DB 030088, DB 03000 RF Power Feed-Through Capacitors with Conductor Rod, Class Ceramic FEATURES Small size Geometry minimizes inductance Wide range of capacitance values APPLICATIONS Filtering purposes
ZF Maschinenantriebe GmbH Industrial Drives. Planetary gearboxes Economy Series for Servomotors
ZF Maschinenantriebe GmbH Industrial rives Planetary gearboxes Economy Series for Servomotors 2 ZF-uoplan 2K Two-speed Gearboxes ZF-Ecolift Elevator Gearboxes ZF-Servoplan G ompact Gearbox ZF-Tiratron
High Voltage MLC Chips
NEW 630V RANGE HOW TO ORDER 1808 A A 271 High value, low leakage and small size are difficult parameters to obtain in capacitors for high voltage systems. AVX special high voltage MLC chip capacitors meet
Power Resistor for Mounting onto a Heatsink Thick Film Technology
Power Resistor for Mounting onto a Heatsink Thick Film Technology FEATURES LPS high power: 1100 W Wide resistance range: 1 to 1.3 k E24 series Non inductive Easy mounting Low thermal radiation of the case
SC-1000/2000 ROTARY CODED SWITCHES S C T B FEATURES PART NUMBER DESIGNATION. Please refer to the LIST OF PART NUMBERS when placing orders.
SC-00/2000 RoHS compliant INTERNAL STRUCTURE SC-00 / 2000 series 4 2 3 6 7 5 FEATURES Part name Material Flammability Housing Metallic spring O ring Insert rotor Polyphenylenesulphide Stainless (SUS 30)
MR medium rating busbar
technical information General features MR is fully compliant with S EN 0-, specifically, the rated current of the Zucchini busbar trunking systems is always rated at the average ambient temperature of
Experiment AM Angular Momentum
Experiment AM Angular Momentum Introduction If an object, e.g., a heavy ball, comes straight at you and you catch it, you may stagger back while exerting the impulse -- some force for some time -- needed
Power Resistor Thick Film Technology
Power Resistor Thick Film Technology LTO series are the extension of RTO types. We used the direct ceramic mounting design (no metal tab) of our RCH power resistors applied to semiconductor packages. FEATURES
Minimum lever wobble and high precision characteristics combined with good operational feel. Typical Specifications. Total resistance tolerance ±20%
RS K Master (K Fader) Minimum lever wobble and high precision characteristics combined with good operational feel Typical Specifications Items Specifications tolerance ±0% Maximum operating voltage 50V
RFB Series (High R.C., Long Life) MERITEK
FEATURES Low impedance and long life withstanding 10000 hours load life. Suitable for electronic ballast, adaptor and switching power. SPECIFICATIONS Item Operating Temp Range Rated Working Voltage Capacitance
Amphenol C 091 A/B/D. Circular Connectors. Amphenol-Tuchel Electronics GmbH
Amphenol C 091 A/B/D Circular Connectors Amphenol-Tuchel Electronics GmbH General information These connectors are designed and produced in conformity with the low-voltage directive (/3/EWG) respectively
Direct Water Cooled Wirewound Resistor
Direct Water Cooled Wirewound Resistor FEATURES Direct cooling without heatsink Excellent power / volume ratio Multi resistive element option Material categorization: for definitions of compliance please
SD-1000/2000 ROTARY CODED SWITCHES S D T B FEATURES PART NUMBER DESIGNATION. Please refer to the LIST OF PART NUMBERS when placing orders.
SD-00/2000 RoHS compliant INTERNAL STRUCTURE SD-00 / 2000 series Part name Material Flammability FEATURES Housing Polyphenylenesulphide UL9V-0 Metallic spring O ring Insert rotor Base Stainless (SUS 30)
W250: Compact photoelectric switch series for a broad range of applications
W0 Photoelectric switches Photoelectric proximity switches, BGS Photoelectric reflex switches Through-beam photoelectric switches W0: Compact photoelectric switch series for a broad range of applications
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, Y5V
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, 6.3 V TO 50 V 10 nf to 47 µf RoHS compliant & Halogen Free Product Specification Product specification
Power Resistors, for Mounting onto a Heatsink Thick Film Technology
RCH Manufactured in cermet thick fi lm technology, these power resistors exhibit remarkable characteristics and the series includes 4 types ranging from 5 W to 50 W Designed to be mounted onto a heatsink,
1 Fig. 3.1 shows the variation of the magnetic flux linkage with time t for a small generator. magnetic. flux linkage / Wb-turns 1.
1 Fig. 3.1 shows the variation of the magnetic flux linkage with time t for a small generator. 2 magnetic 1 flux linkage / 0 10 2 Wb-turns 1 2 5 10 15 t / 10 3 s Fig. 3.1 The generator has a flat coil
MINIATURE MICROSWITCHES - PREMIUM
0/06 MINIATURE MICROSWITCHES - PREMIUM V - 86 High precision flexible leaf snap-action mechanism Operation without balance-point, even at extremely slow actuating speed Broad range of operating forces
Capacitors. Typical electrical characteristics of metallized polyester capacitors KEU. Type KEU Metallized polyester capacitors
Capacitors Type KEU Metallized polyester capacitors As a dielectric high quality polyester film with good electrical properties is used. Electrodes of capacitor are vacuum metallized aluminium. The thickness
Molded Metal Film High Stability (< 0.25 % after 1000 h) High Temperature (up to 175 C) Precision Resistors
Molded Metal Film High Stability (< 0.25 % after 1000 h) High Temperature (up to 175 C) Precision Resistors The performance of the resistors exceed the requirements of NF C 83230 standards. They are particularly
HTS2030SMD Temperature and Relative Humidity Sensor
Miniature Surface mount SMD package Lead free component Patented solid polymer structure Suitable for linear voltage or frequency output circuitry Fast response time and very low temperature coefficient
Metal-Case Tubular Metalized PPS Film Capacitors
Metalized Polyphenylene Sulfide Metal-Case Tubular Metalized PPS Film Capacitors Type 820P EECTRICA SPECIFICATIONS Capacitance Range: 0.01 μf to 15.0 μf C Voltage Range: 50 VC to 400 VC AC Voltage Range:
DATA SHEET SURFACE MOUNT MULTILAYER CERAMIC CAPACITORS General purpose & High capacitance Class 2, X5R
DATA SHEET SURFACE MOUNT MULTILAYER CERAMIC CAPACITORS General purpose & High capacitance Class 2, 4 V TO 50 V 100 pf to 100 µf RoHS compliant & Halogen free Product Specification Product specification
NTC Disc Thermistors ND 03/06/09 NE 03/06/09 NV 06/09 APPLICATIONS TECHNOLOGY PERFORMANCE CHARACTERISTICS OPTIONS STANDARDIZATION
ND 03/06/09 NE 03/06/09 NV 06/09 APPLICATIONS Commodity Product: 2 families ND or NE : general purpose NV : professional Alarm and temperature measurement application Temperature regulation application