SPOOL VALVES pilot operated or air operated, spool type single/dual solenoid or air (mono/bistable function) aluminium body, NAMUR style, 1/4 to 1/2

Transcription

1 SPOOL VLVS pilot operated or air operated, spool type single/dual solenoid or air (mono/bistable function) aluminium body, NMUR style, / to / / NC / 0 /-/ Series - TURS SCO/JOUCOMTIC solenoid valves satisfy all relevant C irectives The monostable spool valves, series, have TÜV certified IC 0 unctional Safety data and can be used up to SIL-/K-7 The spool valves have threaded port connections and NMUR style interface The same spool valve can be adapted for / NC or / functions for controlling double-acting and single-acting actuators ll the exhaust ports of this spool valve are pipable, providing better environmental protection, particularly recommended for sensitive areas such as clean rooms, and applications in the pharmaceutical and food processing sectors The valves offer environmental protection against the ingress of liquids, dusts or any other foreign matter (environmental-protected construction) poxy moulded coil for general service applications GNRL ifferential pressure - 0 bar [ bar 00 kpa] low (Qv at bar) / 700 l/min (NR) / - / 000 l/min fluids ( ) temperature range (TS) seal materials ( ) air, inert gas, filtered - C to +0 C NR (nitrile) + PUR (polyurethane) MTRILS IN CONTCT WITH LUI ( ) nsure that the compatibility of the fluids in contact with the materials is verified ody luminium, black anodized nd covers + interface plates Glass-filled polyamide Internal parts Zamak, stainless steel, acetal (POM), aluminium Sealing NR + PUR Core and core tube Stainless steel Shading coil Copper IR OPRT SPCIICTIONS pipe size orifice size flow coefficient Kv operating pressure differential (bar) min. max. (PS) air ( ) ( ) (mm) (m /h) (l/min) ~ Pilot air operated - spring return (monostable) optional basic catalogue number / 0,7, () /,, /,, Pilot air operated and return (bistable) / 0,7, /,, /,, UP Not vailable Ultra Low power LP Low power RP-MP,0W -,0W Reduced and Medium power P,W asic power POWR LVLS - cold electrical holding values (Watt) monostable Series Not vailable PILOT OPRT SPCIICTIONS operating pressure flow pipe orifice differential (bar) power coefficient size size Kv min. max. (PS) level air ( ) ( ) (mm) (m /h) (l/min) ~ ~/ Solenoid air pilot operated - spring return (monostable) optional solenoids TX/CNLC x d x em xm x i PV IP SC basic catalogue number / 0, RP () / 0, MP () /,, 0 0 P /,, 0 0 P Solenoid air pilot operated and return (bistable) / 0, RP / 0, MP /,, 0 0 P /,, 0 0 P Select for NPT NSI.0. or select G for ISO G (/) vailable feature () Certified IC 0 unctional Safety data, used suffix SL ll leaflets are available on: PIC--0-G 00/R0

2 SRIS -- PRIX TL description power level 7 LP RP MP P S C U Solenoid + spade plug connector, dustproof - TX (N0--) - - P V ncapsulated TX (N 00-N0--) - - S C Solenoid with spade plug connector (N 070) - - X Other special constructions - - SUIX TL suffix description power level LP RP MP P G Non-electrical, G/ x c, construction safety, gas/dust - TX (prn -) /M S Screw type manual operator - /" M Metering device (exhaust reducers,series ) - /S" S L Certified IC 0 unctional Safety data () - () Not to use with MS suffix OPTIONS & CCSSORIS catalogue spare parts exhaust protector bronze stainless steel number kit no. (set of ) ~/ (G) (G) (NPT) G... (/) () 00 () G... (/) G... (/) Select for NPT NSI.0. or select G for ISO G (/) vailable feature - Not available * TX solenoids are also approved to N 0-- (dust) and N - (non electrical valves) () Provide with «SL» suffix PROUCT SLCTION GUI STP Select basic catalogue number, including pipe thread indentification letter. Refer to the specifications table on page. xample: G00 STP Select (combination). Refer to the specifications table on page and the table on page, respect the indicated power level. ir operated version, no used. xample: PV STP Select suffix (combination) if required. Refer to the suffix table on page, respect the indicated power level. G suffix available for air operated version only (do not use MS suffix). xample: MS STP Select voltage. Refer to standard voltages on page. xample: 0 V / 0 Hz STP inal catalogue / ordering number. xample: PV G00 MS 0 V / 0 Hz ORRING XMPLS: SC G 00 MS 0V / 0 Hz SCU G 00 V / 0 Hz PV 00 V / 0 Hz SC G 00MS V / C G 0 G 0 G G 0 G SL SC G 00 SL 0V / 0 Hz pipe thread basic number voltage suffix LCTRICL CHRCTRISTICS Coil insulation class Connector specification IN 0, mm, industry, standard (type 0) or ISO 00 (type 0) Connector Spade plug (cable Ø - mm or Ø -0 mm) lectrical safety IC Standard voltages C () V - V C (~) V - V - V - 0V/0Hz; Other voltages and 0Hz are available on request power ratings operator ambient electrical replacement coil inrush holding hot/cold temperature safety code enclosure ~ ~ option range (TS) protection ~ (V) (V) (W) (W) ( C) (N 0) 0 V / 0 Hz V C type () asic power (P) SC 7 /, - to +0 N 070 moulded IP SCU 7 /, - to +0 II IP T C moulded IP - () - () 0 PV - - -/, -0 to +/0 II G/ x m IIC T(C-C) moulded IP - () - () 0 Medium Power (MP) PV,/,0-0 to +0 II G/ x m IIC T(C)/T(C) moulded IP - () - () 0 Reduced Power (RP) SC,,,/,0 - to +0 N 070 moulded IP SCU,,,/,0 - to +0 II IP T 00 C moulded IP - () - () 0 () Refer to the dimensional drawings on pages and. (ir operated versions, refer to page, types and ) () Multiple coil-kits available under TX, consult SCO/JOUCOMTIC ll leaflets are available on: /R0

3 SRIS -- ITIONL OPTIONS Other pipe threads are available on request Coil type CM with connector type 0 ISO 00 (Pg P) Polyamide coil x m (Prefix PV ) execution can be supplied in various cable lengths Compliance with "UL" standard is available on request (- ranges) Set of stainless steel mounting screws, catalogue number 7 0 (Series ) Set of two exhaust reducers, G/, catalogue number 00 (Series ) ustproof TX (SCU) with a coil and spade plug connector with lead ( m lead), TPL 0 Magnetic latch execution for series, TPL 0 INSTLLTION Installation/maintenance instructions are included with each valve The solenoid valves and air operated valves can be mounted in any position without affecting operation IC 0 unctional Safety (Suffix SL), permissible temperature range: -0 C to +0 C. Probability of failure, consult SCO/JOUCOMTIC Spool valve supplied with two interface plates with NMUR mating surfaces. epending on function (NC / or /), position one of the two plates on the spool valve body before installing on actuator It is necessary to connect pipes or fittings to the exhaust ports to protect the internal parts of the spool valve and its pneumatic operator if used outside or in harsh environments (dusts, liquids etc.) owel pin (if necessary), bolts and gaskets are standard supplied Threaded pipe connection identifiers are NPT (NSI.0.); G G (ISO /) IMNSIONS (mm), WIGHT (kg), PILOT OPRT 00 / 00 MS / 00 / 00 MS G* M H TYP 0 Prefix "SC" and «SCU» Solenoids Reduced power poxy moulded IC / x IN IP / II IP T C to T C (SCU) J** S K** TYP 0 Prefix "PV" Solenoid Medium power poxy encapsulated m lead with cores, length m N 00 and N 0-- II G/ x m II IP * + mm for connector removal ** + mm for coil removal - ( x /) ( x /) 00 / 00 MS / 00 / 00 MS G* M 0 0 J** S K** - ( x /) ( x /) H L L N M N M R O* R O* 00 / 00 MS / 00 / 00 MS 00 / 00 MS / 00 / 00 MS G* M H 0 0 I** TYP 0 Prefix "SC" and «SCU» Solenoids asic power poxy moulded IC / ISO 00 IP / II IP T C to T C (SCU) J** S P K** 7 Q TYP 0 Prefix "PV" Solenoid asic power poxy encapsulated m lead with cores, length m N 00 and N 0-- II G/ x m II IP 00 / 00 MS / 00 / 00 MS 00 / 00 MS / 00 / 00 MS G M 0 0 I** J** S P K** 7 Q ll leaflets are available on: 0 H L x / () - / () L M N R x / () - / () M N R O O* 00/R0-0-

4 SRIS -- IMNSIONS (mm), WIGHT (kg), IR OPRT TYP 0 No Prefix ("G", "SL" or "GSL" suffix) ir operated version TYP 0 No Prefix ("G" suffix) ir operated version / 0 S 0 / 0 / 0 / 0 S 0 G/ J K - ( x /) ( x /) L M G/ I J P K Q 7 0 L M 7 R mounting holes. mm dia.; Spotfacing: mm dia., depth mm mounting holes. mm dia., Spotfacing: mm dia., depth mm One mm (Series ) dia. hole for dowel pin - in position : / NC function plate (Series ) - in position : / function plate (Series ) O-ring seals (supplied) xhaust reducers G / (Series ) or protectors adaptable on orifices and Interface plates One, mm (Series -) dia. hole for dowel pin. Same position for interface plate /NC or / R x / () - / () type power G H I J K L M N O P Q R S weight () option level () () 0 () SC/SCU RP , 0, 0 () SC/SCU P, 0 0,7,,, 7, 7, 0,,,7, 0 0,, 0 () SC/SCU P, 0 0,7,, 0, 7, 7, 0,,,, 0 0,0,0 0 () PV MP, , 0,0 0 () PV MP, 0 0,7, -, 7, 7, 0, 7,,,7, 0 0,, 0 () PV MP, 0 0,7, - 0, 7, 7, 0, 7,,,, 0 0,, 0 () , 0, 0 () - -, 0 70,7 - -,, 7, - -,,7, 0 0,, 0 () - -, 0 70, ,, 7, - -,,, 0 0,, () Incl. coil(s) and connector(s) () monostable () bistable SCTIONL RWINGS monostable - Series bistable Series bistable - Series ll leaflets are available on: 00/R0-0-

5 SOLNOI VLVS pilot operated, spool type single/dual solenoid (mono/bistable function) aluminium body, NMUR style, / to / / NC / 0 /-/ Series - TURS SCO/JOUCOMTIC solenoid valves satisfy all relevant C irectives The monostable spool valves, series, have TÜV certified IC 0 unctional Safety data and can be used up to SIL-/K-7 The solenoid spool valves have threaded port connections and NMUR style interface The same spool valve can be adapted for / NC or / functions for controlling double-acting and single-acting actuators ll the exhaust ports of this solenoid spool valve are pipable, providing better environmental protection, particularly recommended for sensitive areas such as clean rooms, and applications in the pharmaceutical and food processing sectors The valves offer environmental protection against the ingress of liquids, dusts or any other foreign matter (environmental-protected construction) poxy moulded coil for general service applications Stainless steel manual operator as standard Piezotronic pilot, ultra low power level for inside application, suitable to connect to process fieldbus remote I/O or valve couplers Possibility of external air pilot supply (SCO solenoid interface) GNRL ifferential pressure - 0 bar [ bar 00 kpa] low (Qv at bar) / 700 l/min (NR) fluids ( ) / - / 000 l/min temperature range (TS) seal materials ( ) air, inert gas, filtered - C to +0 C NR (nitrile) + PUR (polyurethane) MTRILS IN CONTCT WITH LUI ( ) nsure that the compatibility of the fluids in contact with the materials is verified SCO solenoid interface CNOMO solenoid (pilot) interface ody luminium, black anodized luminium, black anodized nd cover (spring) Glass-filled polyamide Glass-filled polyamide Interface plates Glass-filled polyamide Glass-filled polyamide Spool valve internal parts Zamak, st. steel, Zamak, st. steel, acetal (POM), aluminium acetal (POM), aluminium Pilot internal parts Refer to specific Size 0 (0.0.0), Refer to solenoid catalogue catalogue pages: 7 pilot pages (CTNK) and pilot (ISSC) - Size (0..0N), Refer - to catalogue pages: - 0 pilot (CSC/CSCIS) - and 0 piezotronic - pilot (PISC/PISCIS) Pilot end-covers luminium luminium Core tube Stainless steel - Core and plugnut Stainless steel - Core spring Stainless steel - Sealings & discs NR - Top disc P (nylon) - isc holder C (cetal) - Cartridge () Welded, packless ISI 0 - Seat rass - Seat insert C (cetal) - Shading coil Copper - Riderring () PT (teflon) - UP LP 0,00W - 0,W 0,W -,7W Ultra Low power Low power RP-MP Not vailable Reduced and Medium power P,W asic power POWR LVLS - cold electrical holding values (Watt) ll leaflets are available on: /R0

6 SCO SOLNOI INTRC SPCIICTIONS operating pressure flow pipe orifice differential (bar) power coefficient size size Kv min. max. (PS) level air ( ) ( ) (mm) (m /h) (l/min) ~ ~/ Solenoid air pilot operated - spring return (monostable) PRIX TL description power level 7 LP RP MP P S C U ustproof TX (N 0--) * xplosionproof - NM,,, 7, - - M ncapsulated TX (N 00 & N 00) * - - T Threaded conduit/hole (M0 x.) - - I S S C Intrinsically safe with SC coil TX (N 000) * N lameproof - lum. TX (N 00) * N L lameproof - Cast Iron TX (N 00) * N K lameproof - lum. TX (N 00) * P V ncapsulated TX (N 00) * - - S C Solenoid with spade plug connector (N 070) - - W P Waterproof IP7 - Metal enclosure (N 070) - - W P U ustproof TX (N 0--) - Metal enclosure * W P I S I.S. with Metal IP7 enclosure TX (N 000) * W S Waterproof IP7 - SS enclosure - - W S U ustproof TX (N 0--) - SS enclosure * W S M SS "M" enclosure TX (N 00 & N 000) * - - W S N lameproof - SS TX (N 00) * Z N ncapsulated Non Sparking TX (N 00) * - - T Threaded conduit (/" NPT) - - H T Class H - High temperature, +0 C temp. ambient, only Series X Other special constructions - - SUIX TL suffix description power level LP RP MP P M O Impulse or locking type manual operator (push-turn) - - /" M Metering device (exhaust reducers), only Series - - S L Certified IC 0 unctional Safety data () - - ll leaflets are available on: NM 7 & optional solenoids TX/CNLC x d x em x m x i x n N NK M PV IS ZN SRIS -- basic catalogue number / 0, P () / 0, P H0 () / 0, LP / 0, LP H0 /,, 0 0 P /,, 0 0 P G0 /,, 0 0 LP /,, 0 0 LP G0 /,, 0 0 P /,, 0 0 P G0 /,, 0 0 LP /,, 0 0 LP G0 Solenoid air pilot operated and return (bistable) / 0, P / 0, P H0 / 0, LP / 0, LP H0 /,, 0 0 P /,, 0 0 P G0 /,, 0 0 LP /,, 0 0 LP G0 /,, 0 0 P /,, 0 0 P G0 /,, 0 0 LP /,, 0 0 LP G0 () Certified IC 0 unctional Safety data, used suffix SL OPTIONS & CCSSORIS catalogue spare parts exhaust protector kit no. bronze stainless steel number (set of ) ~/ (G) (G) (NPT) G... (/) () 00 () G... (/) G... (/) Select for NPT NSI.0. or select G for ISO G (/) vailable feature vailable feature in C only - Not available * TX solenoids are also approved to N 0-- (dust) and N - (non electrical valves) () Not to use with MO suffix () Provide with «SL» suffix () Prefix should always be used with the letter H in the basic number. IP SC PROUCT SLCTION GUI STP Select basic catalogue number, including pipe thread indentification letter. Refer to the specifications table on page. xample: G0 STP Select (combination). Refer to the specifications table on page and the table on page, respect the indicated power level. xample: M STP Select suffix (combination) if required. Refer to the suffix table on page, respect the indicated power level. xample: MO STP Select voltage. Refer to standard voltages on page 7. xample: 0V / 0Hz STP inal catalogue / ordering number. xample: M G0 MO 0 V / 0 Hz ORRING XMPLS: SC G 0 0V / 0 Hz SC G 0SL 0V / 0 Hz SC G 0MO 0V / 0 Hz SCHT 0MO 0V / 0 Hz ISSC G 0MO V / C WPIS 0 V / C M 0MO 0V / 0 Hz G H 0MS 0V / 0 Hz () pipe thread () basic number voltage suffix 00/R0

7 () Refer to the dimensional drawings on pages 0 to. () Intrinsically safe pilots: Check the electrical characteristics in the corresponding catalogue pages (ISSC/WPIS operators). () Multiple coil-kits available under TX, consult SCO/JOUCOMTIC - Not available option U i (C) ITIONL OPTIONS Valves configured for external pilot air supply with SCO solenoid interface, TPL 07 Other pipe threads are available on request x m ( "PV") execution can be supplied in various cable lengths Compliance with "UL", "CS" and other local approvals available on request /" NPT ( "T") and M0 x. ( "T") conduits (aluminium or SS) available for Series steel solenoid housing Set of stainless steel mounting screws, catalogue number 7 0 (Series ) Set of two exhaust reducers, G/, catalogue number 00 (Series ) INSTLLTION safety parameters I i P i C i L i (V) (m) (W) (µ) (mh) (LP) ISSC 00, 0 0 WPIS 00, 0 0 SRIS -- SCO SOLNOI INTRC LCTRICL CHRCTRISTICS Coil insulation class Connector Spade plug (cable Ø - 0 mm) Connector specification ISO 00 lectrical safety IC Standard voltages C () V - V C (~) V - V - V - 0V/0Hz; Other voltages and 0Hz are available on request power ratings operator ambient electrical replacement coil inrush holding hot/cold temperature safety code enclosure ~ ~ option range (TS) protection ~ (V) (V) (W) (W) ( C) (N 0) 0 V / 0 Hz V C type () asic power (P) SC 0, /, -0 to +7 N 070 moulded IP SCU 0, /, -0 to +7 II IP T C(~)/T 00 C() moulded IP - () - () 0 WP/WS 0, /, -0 to +7 N 070 steel IP WPU/WSU 0, /, -0 to +7 II IP7 T 00 C steel IP7 - () - () 0 (WS)N/NL 0, - -0 to +/0/0 II G/ x d IIC T/T/T alu/steel IP (WS)N/NL /, -0 to +0/0/7 II G/ x d IIC T/T/T alu/steel IP NK 0, /, -0 to +0/0 II G/ x d II+H T(~/) aluminium IP M/WSM 0, /, -0 to +0 II G/ x em II T steel IP PV 0, /, -0 to + II G/ x m II T(~)T() moulded IP - () - () 0 0, /, -0 to +/0 NM type 7 and NM X ZN 0, /, -0 to +0 II G/ x n II T moulded IP - () - () 0 (LP) SC,,,,7/,7-0 to +0 N 070 moulded IP WP/WS,,,,7/,7-0 to +0 N 070 steel IP M/WSM,,,,7/,7-0 to +0/ II G/ x em II T/T steel IP7 - () - () 0 PV - - -,7/,7-0 to +0 II G/ x m II T moulded IP - - () ,7/,7-0 to +0 NM type 7 and NM X - - () 0 ISSC () ,/0, -0 to +0 II G/ x ia IIC T moulded IP WPIS () ,/0, -0 to +0 II G/ x ia IIC T steel IP ZN - - -,7/,7-0 to +0 II G/ x n II T moulded IP - - () 07 Installation/maintenance instructions are included with each valve The solenoid valves can be mounted in any position without affecting operation IC 0 unctional Safety (Suffix SL), permissible temperature range: -0 C to +0 C.Probability of failure, consult SCO/JOUCOMTIC Spool valve supplied with two interface plates with NMUR mating surfaces. epending on function (NC / or /), position one of the two plates on the spool valve body before installing on actuator It is necessary to connect pipes or fittings to the exhaust ports to protect the internal parts of the spool valve and its pneumatic operator if used outside or in harsh environments (dusts, liquids etc.) owel pin (if necessary), bolts and gaskets are standard supplied Threaded pipe connection identifiers are NPT (NSI.0.); G G (ISO /) x d ( "N") enclosure is provided with a /" NPT threaded entry hole (M0 x, ( "T") optional) and is supplied without cable gland x d ( "NK") enclosure is provided with a /" NPT threaded entry hole (/ NPT ( T ) or M0 x, ( "T") optional) and is supplied without cable gland x em ( "M") execution: solenoid enclosure has a cable gland with integral strain relief for cables with an o.d. from 7 to mm and is provided with an internal and external connection facility for an earthing or bonding conductor ll leaflets are available on: /R0

8 ll leaflets are available on: SRIS -- CNOMO SOLNOI (PILOT) INTRC SPCIICTIONS operating pressure flow optional solenoids basic pipe orifice differential (bar) power coefficient catalogue size size Kv min. max. (PS) level TX/CNLC number air ( ) xd xi xi xi IP IP CNOMO CNOMO ( ) (mm) (m /h) (l/min) ~ ~/ CTNK ISSC CSCIS PISCIS CSC PISC size 0 size Solenoid air pilot operated - spring return (monostable) / 0, LP () / 0, 0 - LP () / 0, P () - / 0, LP / 0, 0 UP () /,, 0 0 LP /,, - LP /,, 0 0 P /,, 0 0 LP /,, UP /,, 0 0 LP /,, - LP /,, 0 0 P /,, 0 0 LP /,, UP Solenoid air pilot operated and return (bistable) / 0, LP / 0, 0 - LP / 0, P / 0, LP / 0, 0 UP /,, 0 0 LP /,, - LP /,, 0 0 P /,, 0 0 LP /,, UP /,, 0 0 LP /,, - LP /,, 0 0 P /,, 0 0 LP /,, UP () Certified IC 0 unctional Safety data, used suffix SL PRIX TL PROUCT SLCTION GUI description power level STP 7 UP LP RP P Select basic catalogue number, including pipe thread indentification CNOMO solenoid (pilot) interface size 0 letter. Refer to the specifications table I S S C Intrinsically safe with pilot, TX (N 000) * on page. C T N K lameproof with pilot 7, TX (N 00) * xample: G0 STP CNOMO solenoid (pilot) interface size Select (combination). Refer to C S C Solenoid with spade plug connector (N 070), 0 pilot the specifications table and the C S C I S Intrins. safe, spade plug connector, pilot 0; TX (N 000) * table on page, respect the indicated P I S C Solenoid with spade plug connector (N 070), 0 pilot power level. P I S C I S Intrinsically safe with pilot piezotronic 0; TX (N 000) * xample: CSC STP Select suffix. Suffix MO mandatory for the pilots (ISSC) and 0 (CSCIS). SUIX TL Refer to the suffix table on page, respect suffix description power level the indicated power level. xample: MO UP LP RP P STP CNOMO solenoid (pilot) interface size 0 Select TPL mandatory for the pilot 0 (PISCIS), HV C ( mw) and HV M S Screw type manual operator () C ( mw). dd X between the M O Impulse or locking type manual operator (push-turn) () PISCIS and the basic catalogue number. /" M Metering device (exhaust reducers), only Series - STP S L Certified IC 0 unctional Safety data Select voltage. Refer to standard voltages on page. CNOMO solenoid (pilot) interface size xample: 0V / 0Hz M S Screw type manual operator () STP M O Impulse manual operator / / - - inal catalogue / ordering number. /" M Metering device (exhaust reducers), only Series / - xample: S L Certified IC 0 unctional Safety data / / - - CSC G0 MO 0 V / 0 Hz OPTIONS & CCSSORIS ORRING XMPLS: catalogue spare parts exhaust protector CTNK G 0 V / 0 Hz kit no. bronze stainless steel number CTNK G 0MS V / 0 Hz (set of ) ~/ (G) (G) (NPT) CTNK G 0SL V / 0 Hz CSC G 0 0V / 0 Hz G... (/) () 00 () CSC 0MO 0V / 0 Hz G... (/) CSC G 0SLMO 0V / 0 Hz G... (/) ISSC G 0MO V / C PISCIS G 0MO V / C PISCIS G 0SLMO V / C PISCIS X G 0MO TPL0 HV /C Select for NPT NSI.0. or select G for ISO G (/) vailable feature vailable feature in C only - Not available * TX solenoids are also approved to N 0-- (dust) and N - (non electrical valves) () Not to use with «SL» suffix () Provide with «SL» suffix pipe thread basic number voltage TPL suffix 00/R0

9 ITIONL OPTIONS Used TPL number: TPL 0 (Piezotronic, PISCIS, HV ( mw)) TPL 0 (Piezotronic, PISCIS, HV ( mw)) Other pipe threads are available on request Set of stainless steel mounting screws, catalogue number 7 0 (Series ) Set of two exhaust reducers, G/, catalogue number 00 (Series ) INSTLLTION Installation/maintenance instructions are included with each valve The solenoid valves can be mounted in any position without affecting operation SRIS -- CNOMO SOLNOI (PILOT) INTRC LCTRICL CHRCTRISTICS Coil insulation class Connector Spade plug (cable Ø - 0 mm or Ø - 7 mm) Connector specification ISO 00 or size, MP,x0, -, mm (0 and piezotronic) Standard voltages () C() CTNK: V - V ; CSC: V - V - V - V ; CSCIS: V ; ISSC : V PISC: V à 70V ; PISCIS : V, V, V, V C (~) CTNK/CSC: V - V - V - 0V/0Hz; Other voltages and 0Hz are available on request PISC: V à 70V power ratings operator ambient electrical replacement coil inrush holding hot/cold temperature safety code enclosure ~ ~ option range (TS) protection ~ (V) (V) (W) (W) ( C) (N 0) 0 V / 0 Hz V C type () asic power CTNK 0, /, -0 to +0/0 II G/ x d II+H T(C/C) aluminium IP CSC,,, /, - to +0 N 070 moulded IP - - CSCIS ()() , -0 to +0 II G/ x ia IIC T moulded IP - - ISSC ()() - - -, -0 to +0 II G/ x ia IIC T moulded IP - - Ultra low power PISC ,007 0 to +0 - moulded IP - - PISCIS ()() V ,00-0 to +0 II G x ia IIC T moulded IP - - PISCIS ()() V ,0-0 to +0 II G x ia IIC T moulded IP - - PISCIS ()() LV ,0-0 to +0 II G x ia IIC T moulded IP - - PISCIS ()() HV ,0-0 to +0 II G x ia IIC T moulded IP - - PISCIS ()() LV ,0-0 to +0 II G x ia IIC T moulded IP - - PISCIS ()() HV , -0 to +0 II G x ia IIC T moulded IP - - () Refer to the dimensional drawings on pages and () Min. operating current (I ): 0,07 min () Piezotronic standards voltages: Prefix PISC, V to 70 V C/C, peak current max.: 0 m, holding current max.: m Prefix PISCIS: V C / mw V C / mw L V C / mw H V C / mw L V C / mw H V C / mw Turn ON voltage U ON :.. V 7,.. V 0,.. V 0,.. V,.. V,.. V Turn O voltage U O : V, V, V, V V V Peak current : m 0 m, m, m 0 m m Holding current : 0, m, m m,7 m, m, m Cable + max. barrier resistances (R S + R C ) : 00 Ω max. 00 Ω max. 00 Ω max. 70 Ω max. 00 Ω max. 70 Ω max. () Intrinsically safe pilots: Check the electrical characteristics in the corresponding catalogue pages (CSCIS/ISSC/PISCIS: 0//0 pilots). () CSCIS (0 pilot), V -0% +0% : I (ON) min. m; U (ON) min., V; U (max.) recommended, V; U (O) turn off, V; I (O) 0 m - Not available option U i (C) safety parameters I i P i C i L i (V) (m) (W) (µ) (mh) (LP) CSCIS 00, 0 0 ISSC, 0 0 Ultra low power (UP) PISCIS , 0 0 IC 0 unctional Safety (Suffix SL), permissible temperature range: -0 C to +0 C. Probability of failure, consult SCO/JOUCOMTIC Spool valve supplied with two interface plates with NMUR mating surfaces. epending on function (NC / or /), position one of the two plates on the spool valve body before installing on actuator It is necessary to connect pipes or fittings to the exhaust ports to protect the internal parts of the spool valve and its pneumatic operator if used outside or in harsh environments (dusts, liquids etc.) owel pin (if necessary), bolts and gaskets are standard supplied Threaded pipe connection identifiers are NPT (NSI.0.); G G (ISO /) x d ( "CTNK") enclosure is provided with a /" NPT threaded entry hole (/ NPT ( T ) or M0 x, ( "T") optional) and is supplied without cable gland Valves with suffix "SL" should be provided with of the specific exhaust protectors ll leaflets are available on: /R0

10 SRIS -- IMNSIONS (mm), WIGHT (kg) Series Series - Types 0 to Types 0 to 0 C C, / C C x / x / 7 0,7 0 I / 7, P 0 Q C x V, 7,, 7 Types to Types to C C, 07 C C x / x / ,7 0 I, P 0 Q C x V, 7,, 7 C Interface plates mounting holes. mm dia.; Spotfacing: mm dia., depth mm; screws (CHc M x ), engaged lenght: 7 mm One mm dia. hole for dowel pin - in position C: / NC function plate - in position C: / function plate O-ring seals (supplied) xhaust reducers G / (Series ) or protectors adaptable on orifices and ll leaflets are available on: C type I P Q V 0 to,,,7 / to,,,7 / 0 to,,, / to,,, / Interface plates mounting holes. mm dia.; Spotfacing: mm dia., depth mm; screws (CHc M x 0), engaged lenght: 7 mm One, mm dia. hole for dowel pin - in position C: / NC function plate - in position C: / function plate O-ring seals (supplied) 00/R0

11 SRIS -- IMNSIONS (mm), WIGHT (kg) 0 / 0 / 0 MO / 0 MO 0 / 0 / 0 MO / 0 MO 0 / 0 / 0 MO / 0 MO TYP 0 Prefix "SC", "SCU" and "ZN" Solenoid asic power poxy moulded IC / ISO 00 (SC/SCU) N 00 (ZN) IP / II IP T 00 C to T 00 C / II G/ x n II TYP 0 Prefix "N, NL and WSN" Solenoid asic power luminium, steel; epoxy coated (N and NL) ISI SS (WSN) N00 and N 0-- IP7 / II G/ x d IIC 0 / 0 / 0 MO / 0 MO 0 / 0 / 0 MO / 0 MO 0 / 0 / 0 MO / 0 MO / 0 0 C + 0 / NPT C TYP 0 Prefix "NK" Solenoid asic power luminium; epoxy coated N00 and N 0-- IP / II G/ x d II + H 0 / 0 / 0 MO / 0 MO 0 / 0 / 0 MO / 0 MO 0 / 0 / 0 MO / 0 MO TYP 0 Prefix "WP", "WS" / "WPU", "WSU" / "M", "WSM" Solenoid asic power Steel; epoxy coated (WP, WPU and M) ISI SS (WS, WSU and WSM) IC / N00 & N00 / N 0-- IP7 / II IP T C to T 00 C / II G/ x em II 0 / 0 / 0 MO / 0 MO 0 / 0 / 0 MO / 0 MO 0 / 0 / 0 MO / 0 MO / / / NPT C C + 0 0,, 00 0 TYP 0 Prefix "PV" Solenoid asic power poxy encapsulated N00 and N 0-- II G/ x m II IP 0 / 0 / 0 MO / 0 MO 0 / 0 / 0 MO / 0 MO 0 / 0 / 0 MO / 0 MO TYP 0 Prefix "" Solenoid asic power poxy encapsulated ICS- NSI / NM type 7 and NOT: applicable to solenoid only H0 / H0 / H0 MO / H0 MO G0 / G0 / G0 MO / G0 MO G0 / G0 / G0 MO / G0 MO / / 0 0 C + C + ll leaflets are available on: 00/R0-0-

12 SRIS -- IMNSIONS (mm), WIGHT (kg) TYP 07 Prefix "SC" / "ZN" Solenoid poxy moulded IC / ISO 00 (SC) N 00 (ZN) IP / II G/ x n II 0 / 0 / 0 MO / 0 MO 0 / 0 / 0 MO / 0 MO 0 / 0 / 0 MO / 0 MO TYP 0 Prefix "WP", "WS" / "M", "WSM" Solenoid Prefix "WPIS" Solenoid Metal; epoxy coated / ISI SS IC / N00 & N00 / N000 / N 0-- IP7 / II G/ x em II / II G/ x ia IIC 0 / 0 / 0 MO / 0 MO 0 / 0 / 0 MO / 0 MO 0 / 0 / 0 MO / 0 MO / NPT / NPT 0 C + 0 C TYP 0 Prefix "PV" Solenoid poxy encapsulated N00 and N 0-- II G/ x m II IP 0 / 0 / 0 MO / 0 MO 0 / 0 / 0 MO / 0 MO 0 / 0 / 0 MO / 0 MO TYP 0 Prefix "" Solenoid poxy encapsulated ICS- NSI / NM Type 7 and NOT: applicable to solenoid only H0 / H0 / H0 MO / H0 MO G0 / G0 / G0 MO / G0 MO G0 / G0 / G0 MO / G0 MO / NPT / 0 0 C + C + TYP Prefix "ISSC" Solenoid Polypropylene moulded N000 and N 0-- II G/ x ia IIC IP 0 / 0 / 0 MO / 0 MO 0 / 0 / 0 MO / 0 MO 0 / 0 / 0 MO / 0 MO TYP Prefix "CTNK" Solenoid asic power 7 pilot, light alloy luminium; epoxy coated N00 and N 0-- IP / II G/ x d II + H 0 MS / 0 MS 0 MS / 0 MS 0 MS / 0 MS C + / NPT 0 G/ / NPT 7 0 C 7 ll leaflets are available on: x,, 00 00/R0-0-

13 SRIS -- IMNSIONS (mm), WIGHT (kg) TYP Prefix "ISSC" Solenoid pilot Polyamide N000 and N 0-- II G/ x ia IIC 0 MO / 0 MO 0 MO / 0 MO 0 MO / 0 MO TYP Prefix "CSC" Solenoid 0 pilot luminium; epoxy coated IC / size (Pg 7P) IP 0 MO / 0 MO 0 MO / 0 MO 0 MO / 0 MO 0 C + M C + TYP Prefix "PISC" and "PISCIS" Solenoids Ultra low power Piezotronic pilots Polyamide, epoxy coated IC (PISC) N000 and N 0-- (PISCIS) IP / II G x ia IIC 0 MO / 0 MO 0 MO / 0 MO 0 MO / 0 MO TYP Prefix "CSCIS" Solenoid 0 pilot luminium; epoxy coated N000 and N 0-- II G/ x ia IIC 0 MO / 0 MO 0 MO / 0 MO 0 MO / 0 MO 0 0 M C + 0 M C + xtra length for disassembly, depending on model x d certified cable gland (on request) Three-core cable, length m Cable gland for unarmoured cable with 7 to mm dia. sheath Pg,P gland for to mm dia. cable Connector rotatable by 0 increments, Pg P (Ø - 0 mm) 7 Screwdriver type manual operator, suffix MS Impulse or locking (push/turn) type manual operator, suffix MO xternal pilot air supply, / pipe size 0 Connector rotatable by 0 increments, Pg 7P (Ø - 7 mm) Impulse type manual operator, suffix MO Connectable pilot exhaust port Non-connectable pilot exhaust port ll leaflets are available on: /R0

14 SRIS -- IMNSIONS (mm), WIGHT (kg) type power C weight () option level monostable bistable / / / / / 0 SC / SCU / ZN P 7, 7 07,7,,,, 00, 0,7,,,7,, 0 N P,,, 0, ,0,70,0,,, 0 NK P 7, , ,00,,0,7,7, 0 WP/WS/WSU/WPU P,, 0, ,7,7,7,,, 0 (WS)M P,, 0, ,7,7,7,,, 0 PV P 7, 0,,, 7,, 0,77,7,7,,, 0 P, 7 0, 0,, 7,, 0,7,7,7,0,, 07 SC / ZN LP, 0, 7 7 0, 0,, 7, 0, 0,7,7,77,,, 0 WP/WS/(WS)M LP,, 07, 0, ,00,,7,,, 0 WPIS LP,, 07, 0, ,00,,7,,, 0 PV LP 7, 0,,, 7,, 0,,,7,0,, 0 LP, 7 0,,, 7,, 0,7,,7,,, ISSC LP 0,,,, 0, 0,0,70,0,,, CTNK P 77, 70,7,7 - -,,,0,70,, ISSC LP 0, 07 0, 7, - - 0,,, 0,0,7, CSC LP 07, 7, - - 0,7,, 0,,, PISC/PISCIS UP 07, 00 7, - - 0,,, 0,,, CSCIS LP 07, 00 7, - - 0,,7,7 0,,7,7 () Incl. coil(s) and connector(s) CCSSORIS ø xhaust protector ronze Stainless steel / NPT ø / NPT 0 Ø Ø / NPT Pilot exhaust protector part number pilot top exhaust low power (SCO solenoid interface) Ø / / / / / / / / SCO/JOUCOMTIC reserves the right to alter the availability, design and specifications without notice. ll leaflets are available on: PIC G -- 00/R0-0-