AIR BREATHER FILTERS. Temperature from -25 to +100 C

Transcription

1 IR BRETHER FILTERS The comprehensive series of breather filters makes it possible to meet all market demands. Metal and plastic styles suitable for use on mobile equipment are available. The function of breather filters is to intercept environmental contamination. The correct use of breather filters ensures longer life of filter cartridges installed in the hydraulic circuit, and in applications where high level of contamination are present. The use of breather filters calls for the simultaneous installation of plugs for filling and topping up fluids; it is recommended to use plugs complete with strainer for correct prefiltration of the fluid. If the filler plug is equipped with a filter, the filtration degree must be the same as that of the breather filter. Temperature from 5 to +00 C Compatibility NBR seals and Cork Gasket, compatible with: Mineral oils to ISO 94 aqueous emulsions Synthetic fluids, glycol water. FPM seals, compatible with: Synthetic fluids type HSHFDRHFDSHFDU. 0

2 Metal breather filter Series T 46 T46GN...P0 With filter Breather filter T46 Example: T46 G 0 P0 Connection to reservoir G G /4 N /4 NPT Filter element 0 µm 0 0 µm Options P0 MP Standard Flow rate with Δp: 0,0 bar Filtration l/min µm 50 0 µm 00 T 46: 0,0 kg 4 Threaded connection Ø T46 G N (Materials) Cover: Chrome plated steel Breather filter: Resin impregnated cellulose Polyurethane/Stainless steel Flange: Galvanised Steel 4 Threaded connection: Phosphated Steel /F 6 (mm) Connection G N G /4 /4 NPT

3 Series T 80 Metal breather filter T80G...P0 With filter Breather filter 4 5 T80 Example: T80 G 0 P0 Connection to reservoir G 5 Options P0 MP Standard N T80G0.9P0 With antislosh feature Filter element 0 µm 0 0 µm Seal 6 0 Without NBR (pressurised only) T80G...P0 With filter and pressurisation valve 4 Valves 0 Without 0. bar pressurisation valve 0.7 bar pressurisation valve 9 ntislosh feature (only with filter element µm) Flow rate with Δp: 0,0 bar Filtration l/min µm µm 550 T80 T 80: 0,50 Kg 4 5 Threaded connection Ø 80 T80 G (Materials) Cover: Chrome plated steel Breather filter: Resin impregnated cellulose Polyurethane 55 Pressurisation valve: Nylon Galvanised Steel 6 /F 5 (mm) Connection G N NBR 4 Flange: Galvanised Steel 5 Threaded connection: Galvanised Steel 6 ntislosh feature: Galvanised Steel

4 5 Nylon breather filter Series TP 90 ir breathers TP90 Example: TP90 G 0 0 L P0 Connection to reservoir 4 Pressurisation valve TP 90 G With filter G M5x 0 Without H G / L G /4 M /4 NPT N NPT Q Filter element 0 µm 0 0 µm Seal 0 Without NBR 0. bar pressurisation valve 0.7 bar pressurisation valve 5 Variants 0 Standard With Dipstick L With Padlock Hasp F With Dipstick and Padlock Hasp 6 Options P0 MP Standard TP90 (Materials) Cover/ringnut: Nylon Breather filter: Resin impregnated cellulose Polyurethane Seal: NBR Flow rate with Δp: 0,0 bar Filtration l/min µm µm 550 TP 90: 0,0 Kg TP G With Pressurisation TP 90 for connection on weld flange 6 Ø 9 TP G With Dipstick 44 8,5 X 5 B 5 5 G H L M N Q M5x G / G /4 NPT B Ø 5,5 Ø 48,5 Ø 4

5 Series SP SP Nylon breather filter Breather filter SP 4 5 Example: SP 075 G4 L0 P0 SP (Materials) Cover: Nylon Connection: Nylon Filter element: Resin impregnated cellulose Filter element Example: 7 L0 Size Filter SP 054 G /8 G/ Filter element Connessione al serbatoio G G G SP 075 G / Filter element L0 Resin impregnated cellulose µm L0 Resin impregnated cellulose 0 µm 4 Seal NBR 5 Opzioni P0 MP Filtri G4 / NPT / NPT Flow rate with Δp: 0,0 bar G5 Filtration l/min SP 054 µm 00 0 µm 50 SP 075 µm 50 0 µm 400 s SP 054: 0,060 Kg SP 075: 0,50 Kg Connection to reservoir SP G G G G4 G G /8 G / G / / NPT / NPT H SP D H H /F (mm) H /F Ø D 054 G 054 G 054 G4 075 G 075 G 075 G4 075 G ,

6 Nylon breather filter 4 SP5 (Materials) Cover: Nylon Breather filter: Resin impregnated cellulose Inorganic microfibre Connection: Nylon 4 Seals: NBR FPM Breather filter SP5 Example: SP5 0 B P0 Filter element 7 5 Series Example: 5 0 P0 Length 5 Variants Connection G B Mx C G / Filter element L0 Resin impregnated cellulose 0 µm SP Indicator 0 Without With antislosh feature B 7 Options P0 Without Visual indicator MP Standard 4 Seals 0 Inorganic microfibre µm V NBR FPM Clogging indicator Set pressure: 0.06 bar ± 0 % Manual reset Flow rate with Δp: 0,0 bar TYPE G Flitration l/min l/min SP 5 SP 5 L SP 5 : 0,40 Kg SP 5 : 0,55 Kg Visual Indicator G / L Visual Indicator Ø 6 /F 8 Ø 6 /F Connection B C G Mx G / /F (mm)

7 Changing the filter element in breather filters series SP 5 Thoroughly clean the plug and adjacent parts. Unscrew and raise the cover. Renew the filter element and screw the cover fully home into the cartridge (DO NOT OVER TIGHTEN). a d b c SP 5 spare parts Pos. Description Q.ty Plug series SP 5 Complete plug See order table Filter Element See order table a Indicator Kit Visual indicator NBR FPM S6P0 b Seal OR 06 Ø 6,64 X,6 c Indicator securing screw d OR indicator OR Ø 8, x,78 The data in this publication are purely guideline. MP Filtri reserves the right to make changes to the models described herein at any time it deems fit in relation to technical or commercial requirements. The colours of the products shown on the cover are purely guideline. Copyright. ll rights reserved. 6

8 Series S S Breather filter S 4 5 Example: S 075 G4 L0 P0 Filter element Example: 7 L0 4 5 Size Filter Filter element Filter element Resin impregnated cellulose 0 µm L0 (06 excluded) L0 Resin impregnated cellulose 0 µm S 4 Seal 5 Options P0 Without NBR MP Standard 6 Connection to reservoir 7 G G G G4 G5 G6 S (Materials) Screw: Galvanised Steel Washer: Teflon Cover: Steel 4 Filter element: Plastisol Galvanised steel mesh Resin impregnated cellulose 5 Ring: Galvanised Steel G /4 G /4 G / G G / G / G /8 G /8 G / /4 NPT /4 NPT / NPT NPT / NPT / NPT /8 NPT /8 NPT / NPT 6 Seal: NBR 7 Connection: nodised luminium Galvanised Steel Connection to reservoir G G G G4 G5 G6 (Kg) G /4 G /4 G / G G / G / G /8 G /8 G / /4 NPT /4 NPT / NPT NPT / NPT / NPT /8 NPT /8 NPT / NPT 0,080 0,50 0,60 0,400 0,590,0 Dimension 8 /F Ø D H H G 075 G 075 G4 075 G D H H 6,5 5,5 68, ,5 /F (mm) Flow rate with Δp: 0,0 bar µm 0 µm l/min

9 Series SCS Flow rate with Δp: 0,0 bar Flitration l/min SCS 050 P SCS 070 P SCS XXX C SCS 00 P SCS XXX F SCS (Materials) Riser: Galvanised steel SCS 50 P SCS XXX C SCS XXX F Dimension SCS CS CG D H H (Kg) H 5 H Ø D H H 5 9 Ø D CS/CG050 CS/CG070 CS00 CS50 CG00 CG ,7 0,95,,6,,6 Ø D Ø D Gasket Ø 4xx (60Sh) (for SCS 00) Ø D Gasket Ø 4xx (60Sh) (for SCS 00) 60 Flange holes for SCS 00 F Flange holes for SCS 050 F 0 SCS Riser dimensions D D (Kg) Ø 7 Ø 8 Ø 6 Ø 4 Ø 5 Ø 6 SCS050...G SCS050...G SCS00...G SCS00...G UN G /4 / 6 UN ,00 0,65 0,450 0,645 9

10 Riser with Filter element SCS Example: SCS 050 F G 0 P0 Riser only SCS Example: SCS 050 F G P Filter element Example: CS P0 Filter element type Connection ISO 8 CS for SCS...G Connection.S.. CG for SCS...G Size 5 Filter element 0 Inorganic microfibre 0 Inorganic microfibre P0 Resin impregnated cellulose Riser assembly excluded Riser assembly excluded Connection to reservoir C Weld riser 6 Seal V 7 Options P0 NBR FPM MP Standard F Flange riser 4 Threaded connection G for SCS 050/070 G /4 for SCS 00/50 G with filter elements series CS UN for SCS 050/070 G / 6 UN for SCS 00/50 G with filter elements series CG 7