Features (Compare to our current 42 & 56 square size motors)
|
|
|
- Domenic Neal
- 5 years ago
- Views:
Transcription
1 Features The best magnetic balance is employed in our round type stepping motor. Motor performance is greatly improved using the latest technology of three dimensional magnetic field analysis and robust design. Features (Compare to our current 42 & 56 square size motors) Both high torque and low vibration performance were achieved. The round core provides the best magnetic balance. High torque performance is also achieved by optimizing the design with three dimensional magnetic filed analysis. More than 30% higher holding torque was achieved and pull-out torque was also improved. (Refer to Fig. 1 and 2) Fig. 1 Fig. 2 Low vibration and low rotational fluctuation were realized by reducing the detent torque using three dimensional magnetic field analysis. Rotational fluctuation was reduced about 30%. Fig. 3 Detent torque of KA60 was reduced about 40%. Current 56SQ Position accuracy was improved by minimizing the deviation of induced voltage. Position accuracy was improved about 30%. (Refer to Fig.4) Fig High torque 2. Low vibration 3. Silent operation 4. High position accuracy Position accuracy of KA60 was improved about 30%. Current 56SQ 1
2 Shaft size and mounting dimension compatibility between the 42sq. & and the 56sq. & KA60. Space Saving: High torque performance with shorter motor. All models are RoHS compliant. Three dimensional magnetic field analysis: The magnetic strength is shown three dimensionally and the highest efficiency core shape is determined. Robust design: A design method that is not influenced by the variation in parts to eliminate product performance variation. Max. Allowable Load / Runout for Motor Shaft Load for Motor Shaft Shaft Run Out ø Specification Ω 2
3 Series () Standard Specifications Model Step angle Voltage Current Resistance Inductance Holding Detent Rotor torque torque inertia Dimension degree/step V/Ø A/Ø Ω/Ø mh/ø mn m oz in mn m oz in g cm 2 oz in 2 HM HM JM JM KM KM Model Step angle Voltage Current Resistance Inductance Holding Detent Rotor torque torque inertia Dimension degree/step V/Ø A/Ø Ω/Ø mh/ø mn m oz in mn m oz in g cm 2 oz in 2 HM HM JM JM KM KM ± ± ± ± ± ± ± Connection Diagrams Rotational direction Accessories: Lead assy 3
4 Speed-Torque Characteristics HM2-501 HM2-502 JM2-501 JM2-502 KM2-501 KM2-502 HM2-551 JM2-551 KM2-551 HM2-552 JM2-552 KM
5 0 0 KA Series Semi-Standard Motor with D-cut Single Shaft (Model example) JM2-501 JM Model List KA degree/step HM KA60JM HM HM KA60JM HM JM KA60KM JM JM KA60KM JM KM KA60LM KM KM KA60LM KM HM KA60JM HM HM KA60JM HM JM KA60KM JM JM KA60KM JM KM KA60LM KM KM KA60LM KM The basic motor characteristics, connection diagrams, and accessories (lead connectors) conform to the standard specifications. ±± ± ± Single shaft specification ± ± ± ± ± ± ± ± ± ± Motor with D-cut Double Shaft (Model example) JM2-501 JM2-511 JM2-551 JM2-561 Model List KA degree/step HM2-511 KA60JM2-511 HM1-511 HM2-512 KA60JM2-512 HM1-512 JM2-511 KA60KM2-511 JM1-511 JM2-512 KA60KM2-512 JM1-512 KM2-511 KA60LM2-511 KM1-511 KM2-512 KA60LM2-512 KM1-512 HM2-561 KA60JM2-561 HM1-561 HM2-562 KA60JM2-562 HM1-562 JM2-561 KA60KM2-561 JM1-561 JM2-562 KA60KM2-562 JM1-562 KM2-561 KA60LM2-561 KM1-561 KM2-562 KA60LM2-562 KM1-562 The basic motor characteristics, connection diagrams, and accessories (lead connectors) conform to the standard specifications. ±± ± ± Double shaft specification ± ± ± ± ± ± ± ± ± ± ± ± ±± 0 0 5dia (0.20dia ) ± ± 6.35dia (0.25dia ) 9
6 Motor with Encoder (Model example) JM Channel JM2E Channel JM2E3-501 Model List KA60 Base motor 2 Channel 3 Channel Base motor 2 Channel 3 Channel HM2-501 HM2E2-501 HM2E3-501 KA60JM2-501 KA60JM2E2-501 KA60JM2E3-501 HM2-502 HM2E2-502 HM2E3-502 KA60JM2-502 KA60JM2E2-502 KA60JM2E3-502 JM2-501 JM2E2-501 JM2E3-501 KA60KM2-501 KA60KM2E2-501 KA60KM2E3-501 JM2-502 JM2E2-502 JM2E3-502 KA60KM2-502 KA60KM2E2-502 KA60KM2E3-502 KM2-501 KM2E2-501 KM2E3-501 KA60LM2-501 KA60LM2E2-501 KA60LM2E3-501 KM2-502 KM2E2-502 KM2E3-502 KA60LM2-502 KA60LM2E2-502 KA60LM2E3-502 HM2-551 HM2E2-551 HM2E3-551 KA60JM2-551 KA60JM2E2-551 KA60JM2E3-551 HM2-552 HM2E2-552 HM2E3-552 KA60JM2-552 KA60JM2E2-552 KA60JM2E3-552 JM2-551 JM2E2-551 JM2E3-551 KA60KM2-551 KA60KM2E2-551 KA60KM2E3-551 JM2-552 JM2E2-552 JM2E3-552 KA60KM2-552 KA60KM2E2-552 KA60KM2E3-552 KM2-551 KM2E2-551 KM2E3-551 KA60LM2-551 KA60LM2E2-551 KA60LM2E3-551 KM2-552 KM2E2-552 KM2E3-552 KA60LM2-552 KA60LM2E2-552 KA60LM2E3-552 ± ± ± ± ± ± ± ± Encoder specification Resolution [P/R] Power-supply voltage Output aspect Output wave form, KA DC 5V ±0.5 V 2 Channel (A, B aspect) or 3 Channel (A, B, I aspect) TTL Recommended pull-up resistor value R [Ω] 2 Channel 3 Channel 11 k 2.7 k Connection diagrams 2 Channel 3 Channel PIN No Connection GND A aspect +5 V B aspect The basic motor characteristics, connection diagrams, and accessories (lead connectors) conform to the standard specifications. PIN No I A B Connection GND +5 V aspect aspect aspect 10
Dimensional drawing face mount flange radial. R = bending radius min. 40 mm. Dimensional drawing face mount flange axial
Incremental Encoder DRS/DRS, face mount flange up to 8,2 Dimensional drawing face mount flange radial Incremental Encoder Connector or cable outlet Protection class up to IP s TTL and HTL Zero-Pulse-Teach
E6C-N. Ideal for Out-of-step Detection of Stepping Motors and Position Control of Rotors and Unloaders
Multi-turn High-precision Encoder Ideal for Out-of-step Detection of Stepping Motors and Position Control of Rotors and Unloaders Reset function for easy origin alignment when built-into equipment. Multi-turn
DRS 61: Incremental encoders, number of lines and zero pulse width freely programmable DRS 60: Incremental Encoders with Zero-Pulse-Teach
NEW DRS : Incremental encoders, number of lines and zero pulse width freely programmable DRS : s with Zero-Pulse-Teach Further highlights of this generation of encoders: Simple zero-pulse-teach by pressing
Model of a DC Generator Driving a DC Motor (which propels a car)
Model of a DC Generator Driving a DC Motor (which propels a car) John Hung 5 July 2011 The dc is connected to the dc as illustrated in Fig. 1. Both machines are of permanent magnet type, so their respective
JRE SCHOOL OF Engineering
JRE SCHOOL OF Engineering Class Test-1 Examinations September 2014 Subject Name Electromechanical Energy Conversion-II Subject Code EEE -501 Roll No. of Student Max Marks 30 Marks Max Duration 1 hour Date
EC 60 TM 200W 48V. with brushless drive. brushless small & compact maintenance-free Protection IP65. Ordering Data
EC-Servo motors with brushless drive EC 0 TM 200W 48V brushless small & compact maintenance-free Protection IP Ordering Data characteristics permanently energized -phase synchronous motor incremental position
Ring encoder with 4mm height contribute to space saving and multifunctioning. Typical Specifications. Rating. Operating life
E E mm Size encoder with mm height contribute to space saving and multifunctioning Typical Specifications Items Specifications Product Line Structure Dip ctuator l e n g t h(m m) Reflow Detent torque (mn
Mechatronics Engineering. Li Wen
Mechatronics Engineering Li Wen Bio-inspired robot-dc motor drive Unstable system Mirko Kovac,EPFL Modeling and simulation of the control system Problems 1. Why we establish mathematical model of the control
AC Synchronous Motors
AC Synchronous Motors A C S Y N C H R O N O U S M O T O R S AC Synchronous Motors Kollmorgen AC synchronous motors are high pole count motors that naturally turn at slower speeds (72 or 60 rpm). at 72
LO-COG DC Gearmotors. Series GM8000. Series GM9000. Series GM BULLETIN LCG Series GM8000, GM9000, GM Power Your Ideas
BULLETIN LCG Series GM8, GM9, GM149 LO-COG DC Gearmotors Pittman brand LO-COG brush-commutated DC gearmotors offer smooth, quiet operation and long life. LO-COG gearmotors feature sintered steel spur gears
SM-42/43 SURFACE MOUNT CERMET TRIMMERS S M - 4 T W Ω ( ) FEATURES PART NUMBER DESIGNATION. RoHS compliant
SURFCE MOUNT CERMET TRIMMERS RoHS compliant INTERNL STRUCTURE 9 8 7 FETURES RoHS compliant Fine adjustment is available utomatic mounting is available (Taping) Reflow soldering is available Sealed construction
SM-42/43 SURFACE MOUNT CERMET TRIMMERS COPAL ELECTRONICS S M - 4 T W Ω ( ) FEATURES PART NUMBER DESIGNATION.
SURFCE MOUNT CERMET TRIMMERS RoHS compliant INTERNL STRUCTURE 9 8 7 FETURES Lead-free soldering, Cadmium-free Fine adjustment is available utomatic mounting is available (Taping) Reflow soldering is available
X-LSM-E Series: Miniature motorized linear stages with built-in motor encoder and controllers
X-LSM-E Series: Miniature motorized linear stages with built-in motor encoder and controllers 25, 50, 100, 150, 200 mm travel 10 kg load capacity Up to 104 mm/s speed and up to 55 N thrust Built-in controller;
DC motors. 1. Parallel (shunt) excited DC motor
DC motors 1. Parallel (shunt) excited DC motor A shunt excited DC motor s terminal voltage is 500 V. The armature resistance is 0,5 Ω, field resistance is 250 Ω. On a certain load it takes 20 A current
3mm Surface Mount, Single-Turn, Sealed Cermet Trimmers
TOCOS POTENTIOMETERS 3mm Surface Mount, Single-Turn, Sealed Cermet Trimmers RoHS Compliant IMPROVED DESIGN Pb-Free and Cd-Free Features 3mm square SMD, single-turn, sealed cermet trimmers Available in
9mm Size Metal Shaft Multi-ganged Type. Typical Specifications. Total resistance tolerance ±20% Maximum operating voltage
K09 9mm Size Multi-ganged 9.mm width potentiometer ideal for various s of control Typical Specifications Items Specifications tolerance ±% Maximum operating voltage 0V C, V DC Total rotational angle 3
DcMotor_ Model Help File
Name of Model: DcMotor_021708 Author: Vladimir L. Chervyakov Date: 2002-10-26 Executable file name DcMotor_021708.vtm Version number: 1.0 Description This model represents a Nonlinear model of a permanent
Chapter 6. Induction Motors. Copyright The McGraw-Hill Companies, Inc. Permission required for reproduction or display.
Chapter 6 Induction Motors 1 The Development of Induced Torque in an Induction Motor Figure 6-6 The development of induced torque in an induction motor. (a) The rotating stator field B S induces a voltage
DC motor / generator. Jeffrey A. Meunier
DC motor / generator Jeffrey A. Meunier jeffm@engr.uconn.edu Electric motor An electric motor is used to convert electrical energy into mechanical energy. Electric motor An electric motor is used to convert
SM-42/43 SURFACE MOUNT CERMET TRIMMERS S M - 4 T W Ω ( ) FEATURES PART NUMBER DESIGNATION. RoHS compliant
SURFCE MOUNT CERMET TRIMMERS RoHS compliant FETURES RoHS compliant Fine adjustment is available utomatic mounting is available (Taping) Reflow soldering is available Sealed construction (Washable) INTERNL
D5.2 Type. Draw wire mechanics with incremental encoder. Measuring length max. 2 m. Compact and simple. Order code draw wire encoder
with incremental encoder Draw wire encoder A40 Traverse speed max. 0.8 m/s The draw wire system A40 with incremental encoder excels with its compact construction. RoHS Compact and simple Measuring length
SM-3/31 SURFACE MOUNT CERMET TRIMMERS. S M - 3 T W 1 k ( ) FEATURES PART NUMBER DESIGNATION
SURFCE MOUNT CERMET TRIMMERS SM-/ RoHS compliant INTERNL STRUCTURE 6 9 8 7 FETURES 6 7 8 9 Part name Housing Base element Electrode Resistive element dhesive Wiper Terminal pin Rotor gear Shaft Material
SM-42/43 SURFACE MOUNT CERMET TRIMMERS S M - 4 T W Ω ( ) FEATURES PART NUMBER DESIGNATION
SURFCE MOUNT CERMET TRIMMERS RoHS compliant INTERNL STRUCTURE 9 8 7 FETURES 7 8 9 Part name Material Flammability Housing Polyphenylenesulphide UL9V- Base element Ceramic Electrode g-pd cermet Resistive
Insulated shaft type with a wide variety of applications. Typical Specifications. Rating. Operating life. Operating temperature range.
ECE ECD mm Size shaft type with a wide variety of applications Typical Specifications Items Specifications Rating Operating life Without detent With detent 0.m V DC m V DC,000 cycles 0,000 cycles (Lightest
Servomotors Order Catalog. LSP-Servomotors with optional planetary gearbox Stall torque 0.18 to 110 Nm
Servomotors Order Catalog LSP-Servomotors with optional planetary gearbox Stall torque 0.8 to 0 Nm Order Catalogue LSP Servomotors ID no.: 08.8B.-0 Date: 0/07 Subject to technical change without notice.
Encoders. Understanding. November design for industry: Help clean up the ocean. Horizon failure forensics
November 2013 www.designworldonline.com INSIDE: design for industry: Help clean up the ocean Page 18 3D CAD: FEA aids Deepwater Horizon failure forensics Page 37 Understanding NETWORKING: Enhancing enterprise
Incremental Rotary Encoder G58
Shaft: Type S / L / H Hollow shaft: Type W Mechanical Data Housing diameter: mm Shaft:... 0 mm Hollow shaft:... mm Line counts:... 0.000 signals: S, KI, KS, HTL, TTL, O, Vpp, µapp onnector or output: axial
Absolute encoders multiturn
elektronischer electronic multiturn, Multiturn, magnetic magnetisch Sendix M66 / M68 (shaft / hollow shaft) The Sendix M6 with Energy Harvesting Technology is an electronic multiturn encoder in miniature
16mm Size Metal Shaft Type
Potentiometer 6mm Size Type RK63 Series A wide range of versatility products applicable for various types of control. Typical Specifications Items Total tolerance Maximum operating voltage Total rotational
X-LSM-SV1 Series: Low vacuum miniature motorized linear stages with built-in controllers
X-LSM-SV1 Series: Low vacuum miniature motorized linear stages with built-in controllers Vacuum compatible to 10-3 Torr 25, 50, 100, 150, 200 mm travel 10 kg load capacity Up to 100 mm/s speed and up to
1200 V 600 A IGBT Module
1200 V 600 A IGBT RoHS Features Trench-gate field stop IGBT technology Low saturation voltage and positive temperature coefficient Fast switching and short tail current Free wheeling diodes with fast and
Lesson 17: Synchronous Machines
Lesson 17: Synchronous Machines ET 332b Ac Motors, Generators and Power Systems Lesson 17_et332b.pptx 1 Learning Objectives After this presentation you will be able to: Explain how synchronous machines
RoHS. Versatile. X g. X 2 e
s IN8, - and The inclinometers of the IN8 series allow measuring inclinations in the range of ±85 or -dimensional inclinations up to 0. With their high robustness, their protection level up to max. IP9k
EDEXCEL NATIONALS UNIT 5 - ELECTRICAL AND ELECTRONIC PRINCIPLES. ASSIGNMENT No. 3 - ELECTRO MAGNETIC INDUCTION
EDEXCEL NATIONALS UNIT 5 - ELECTRICAL AND ELECTRONIC PRINCIPLES ASSIGNMENT No. 3 - ELECTRO MAGNETIC INDUCTION NAME: I agree to the assessment as contained in this assignment. I confirm that the work submitted
Digital AC Motors MHD
Digital AC Motors MHD090 8-1 8 MHD090 8.1 Technical Data Description Symbol Unit MHD090B-035 Type of cooling Natural Natural Surface Liquid Motor overtemperature 60 K 100 K 60 K/100 K 60 K/100 K Electric
Thermal-Magnetic Circuit Breaker 2210-T2...
Thermal-Magnetic Circuit Breaker 0-T... Description One, two and three pole thermal-magnetic circuit breakers with trip-free mechanism and toggle actuation (S-type TM CBE to EN 6094/IEC 94). Featuring
SC125MS. Data Sheet and Instruction Manual. ! Warning! Salem Controls Inc. Stepper Motor Driver. Last Updated 12/14/2004
SC125MS Stepper Motor Driver Salem Controls Inc. Last Updated 12/14/2004! Warning! Stepper motors and drivers use high current and voltages capable of causing severe injury. Do not operate this product
1 Linear feeder 2 Track 3 Cover 4 Side plate 5 Trim weight 6 Sub-structure. 8 Feeding technology afag.com
Linear feeder Track Cover Side plate Trim weight Sub-structure 8 Feeding technology 0 Linear feeder Linear feeder Linear feeder HLF-M Linear feeder HLF-P 8 Control devices PSG Accessory HLF Linear feeder
Gurley Model A58 Absolute Encoder
Gurley Model Absolute Encoder Motion Type: Rotary Usage Grade: Industrial Output: Absolute Resolution: - Bit The model encoder is a single-turn absolute rotary encoder with opto-electronic technology This
Linear measuring technology
Their extremely robust construction, their high IP69k protection level and their wide temperature range make these new draw wire encoders particularly reliable and durable. Their flexibility and adaptability
Definition Application of electrical machines Electromagnetism: review Analogies between electric and magnetic circuits Faraday s Law Electromagnetic
Definition Application of electrical machines Electromagnetism: review Analogies between electric and magnetic circuits Faraday s Law Electromagnetic Force Motor action Generator action Types and parts
Compact and highly reliable type available in many varieties. Typical Specifications. Output signal. Rating. Operating life
1 11mm Size ompact and highly reliable type available in many varieties. Typical Specifications Output signal Items Specifications Two phase of, B Three phase of, B and (1H) Self-return switch (11 / 10B)
Step Motor Modeling. Step Motor Modeling K. Craig 1
Step Motor Modeling Step Motor Modeling K. Craig 1 Stepper Motor Models Under steady operation at low speeds, we usually do not need to differentiate between VR motors and PM motors (a hybrid motor is
TF Series Miniature Snap-acting Switches
Features/Benefits Broad range of operating forces Ratings up to 21 AMPS Wide variety of actuator styles Quick connect terminations Typical Applications Motor controls Thermostatics Portable tools Specifications
SD-1000/2000 ROTARY CODED SWITCHES S D T B FEATURES PART NUMBER DESIGNATION. Please refer to the LIST OF PART NUMBERS when placing orders.
SD-00/2000 RoHS compliant INTERNAL STRUCTURE SD-00 / 2000 series Part name Material Flammability FEATURES Housing Polyphenylenesulphide UL9V-0 Metallic spring O ring Insert rotor Base Stainless (SUS 30)
Power Resistor for Mounting onto a Heatsink Thick Film Technology
DIMENSIONS in millimeters Power Resistor for Mounting onto a Heatsink Thick Film Technology FEATURES 300 W at 85 C bottom case temperature Wide resistance range: 0.3 Ω to 900 kω E24 series Non inductive
POWERSYNC TECHNICAL DATA
POWERSYNC TECHNICAL DATA MOTOR POWER CONNECTIONS Connection options: Flying Leads, MS Connectors, Terminal Board For all motor terminations refer to the following AC synchronous motor connection diagram
ST-32 SURFACE MOUNT CERMET TRIMMERS (SINGLE TURN) S T E T A ( 1 2 ) FEATURES PART NUMBER DESIGNATION
SURFACE MOUNT CERMET TRIMMERS (SINGLE TURN) ST- RoHS compliant INTERNAL STRUCTURE 7 6 5 4 9 8 FEATURES 4 5 6 7 8 9 Part name Wiper Cover Housing Terminal pin Base element O ring Rotor Electrode Resistive
Laboratory 11 Control Systems Laboratory ECE3557. State Feedback Controller for Position Control of a Flexible Joint
Laboratory 11 State Feedback Controller for Position Control of a Flexible Joint 11.1 Objective The objective of this laboratory is to design a full state feedback controller for endpoint position control
FPF1003A / FPF1004 IntelliMAX Advanced Load Management Products
August 2012 FPF1003A / FPF1004 IntelliMAX Advanced Load Management Products Features 1.2 V to 5.5 V Input Voltage Operating Range Typical R DS(ON) : - 30 mω at V IN =5.5 V - 35 mω at V IN =3.3 V ESD Protected:
Thermal-Magnetic Circuit Breaker 2210-S2..
Thermal-Magnetic Circuit Breaker -S.. Description One, two and three pole thermal-magnetic circuit breakers with trip-free mechanism and toggle actuation (S-type TM CBE to EN 60934/IEC 934). Designed for
Motor Specifications and Ratings 200V MDMA
Motor Specifications and Ratings 2V 1.kW to 1.kW Low inertia, Medium Capacity AC2V Motor model Applicable driver Model No. A4 A4F Frame symbol 121 12S1 121 12S1 MDDDT33 MDDDT4 MDDDT33F MDDDT4F MDDDT33
Thermal-Magnetic Circuit Breaker 2210-S2..
Thermal-Magnetic Circuit Breaker -S.. Description One, two and three pole thermal-magnetic circuit breakers with trip free mechanism and toggle actuation (S-type TM CBE to EN 6094/IEC 94). Designed for
International Journal of Advance Engineering and Research Development SIMULATION OF FIELD ORIENTED CONTROL OF PERMANENT MAGNET SYNCHRONOUS MOTOR
Scientific Journal of Impact Factor(SJIF): 3.134 e-issn(o): 2348-4470 p-issn(p): 2348-6406 International Journal of Advance Engineering and Research Development Volume 2,Issue 4, April -2015 SIMULATION
Equal Pitch and Unequal Pitch:
Equal Pitch and Unequal Pitch: Equal-Pitch Multiple-Stack Stepper: For each rotor stack, there is a toothed stator segment around it, whose pitch angle is identical to that of the rotor (θs = θr). A stator
X-LRQ-SV2 Series: High vacuum motorized linear stages with built-in controllers
X-LRQ-SV2 Series: High vacuum motorized linear stages with built-in controllers Vacuum compatible to 10-6 torr 75, 150, 300, 450, 600 mm travel 100 kg load capacity Up to 205 mm/s speed and up to 100 N
13 Amp Programmable DC/DC Regulator PTK series. 3.3VDC, 5VDC, or 12VDC Input
3.3VDC, 5VDC, or 12VDC Input 5-Bit Programmable from 1.3VDC to 3.5VDC or 1.1 to 1.85VDC at 13A Output Ultra-High Efficiency - No Heatsink Required! Remote Sense/Power Good Signal Short Circuit/Over-Voltage
Synchronous Machines
Synchronous Machines Synchronous generators or alternators are used to convert mechanical power derived from steam, gas, or hydraulic-turbine to ac electric power Synchronous generators are the primary
6) Motors and Encoders
6) Motors and Encoders Electric motors are by far the most common component to supply mechanical input to a linear motion system. Stepper motors and servo motors are the popular choices in linear motion
Power Resistor for Mounting onto a Heatsink Thick Film Technology
DIMENSIONS in millimeters Power Resistor for Mounting onto a Heatsink Thick Film Technology FEATURES LPS high power: 1 W Wide resistance range: 1 Ω to 1.3 kω E24 series Non inductive Easy mounting Low
Thermal-Magnetic Circuit Breaker 2210-S2...
Thermal-Magnetic Circuit Breaker 0-S... Description One, two and three pole thermal-magnetic circuit breakers with trip free mechanism and toggle actuation (S-type TM CBE to EN 60934/IEC 934). Designed
Thermal-Magnetic Circuit Breaker 2210-S2...
Description One, two and three pole thermal-magnetic circuit breakers with trip free mechanism and toggle actuation (S-type TM CBE to EN 6094/IEC 94). Designed for panel or plug-in mounting. Available
Exercise 5 - Hydraulic Turbines and Electromagnetic Systems
Exercise 5 - Hydraulic Turbines and Electromagnetic Systems 5.1 Hydraulic Turbines Whole courses are dedicated to the analysis of gas turbines. For the aim of modeling hydraulic systems, we analyze here
Series CCT-58S Multi-Throw DC 18 GHz, SP7T & SP8T Normally Open Coaxial Switch
PART NUMBER CCT-58S DESCRIPTION Commercial Normally Open Multi-throw, DC-18 GHz The CCT-58S/CT-58S is an internally terminated, broadband, multi-throw, electromechanical coaxial switch designed to switch
Generators for wind power conversion
Generators for wind power conversion B. G. Fernandes Department of Electrical Engineering Indian Institute of Technology, Bombay Email : bgf@ee.iitb.ac.in Outline of The Talk Introduction Constant speed
Thermal-Magnetic Circuit Breaker 2210-S2..
Thermal-Magnetic Circuit Breaker -S.. Description One, two and three pole thermal-magnetic circuit breakers with trip free mechanism and toggle actuation (S-type TM CBE to EN 60934/IEC 934). Designed for
Stepping Motors. Chapter 11 L E L F L D
Chapter 11 Stepping Motors In the synchronous motor, the combination of sinusoidally distributed windings and sinusoidally time varying current produces a smoothly rotating magnetic field. We can eliminate
TrenchT2 TM Power MOSFET
Preliminary Technical Information TrenchT2 TM Power MOSFET N-Channel Enhancement Mode Avalanche Rated V DSS I D25 R DS(on) TO-263 (IXTA) = V = A 7mΩ Symbol Test Conditions Maximum Ratings V DSS T J = 25
DATA SHEET POSITIVE TEMPERATURE COEFFICIENT AC/DC POWER SUPPLY SMD0603 series
Product specification November 05, 201 V.0 DATA SHEET AC/DC POWER SUPPLY series RoHS compliant & Halogen free 2 Positive Temperature Coefficient (PTC) Data Sheet Description The 0603 series provides miniature
X-LRT-EC Series: High-load, closed-loop stages with built-in stepper motors, motor encoders, controllers, and dust covers
X-LRT-EC Series: High-load, closed-loop stages with built-in stepper motors, motor encoders, controllers, and dust covers 100, 250, 500, 750, 1000, 1500 mm travel 500 kg load capacity High cantilever stiffness
DC Motor Position: System Modeling
1 of 7 01/03/2014 22:07 Tips Effects TIPS ABOUT BASICS INDEX NEXT INTRODUCTION CRUISE CONTROL MOTOR SPEED MOTOR POSITION SUSPENSION INVERTED PENDULUM SYSTEM MODELING ANALYSIS DC Motor Position: System
Chapter 6: Efficiency and Heating. 9/18/2003 Electromechanical Dynamics 1
Chapter 6: Efficiency and Heating 9/18/2003 Electromechanical Dynamics 1 Losses As a machine transforms energy from one form to another there is always a certain power loss the loss is expressed as heat,
Series CCR-39S Multi-Throw DC-12 GHz, SP7T & SP8T Latching Coaxial Switch
PART NUMBER CCR-39S DESCRIPTION Commercial Latching Multi-throw, DC-12GHz The CCR-39S is a broadband, multi-throw, electromechanical coaxial switch designed to switch a microwave signal from a common input
Power Resistor for Mounting onto a Heatsink Thick Film Technology
DIMENSIONS in millimeters Power Resistor for Mounting onto a Heatsink Thick Film Technology FEATURES 800 W at 85 C bottom case temperature Wide resistance range: 0.3 Ω to 900 kω E24 series Non inductive
Series CCR-39S Multi-Throw DC-12 GHz, SP9T & SP10T Latching Coaxial Switch
PART NUMBER CCR-39S DESCRIPTION Commercial Latching Multi-throw, DC-12GHz The CCR-39Sis a broadband, multi-throw, electromechanical coaxial switch designed to switch a microwave signal from a common input
Power Resistors, for Mounting onto a Heatsink Thick Film Technology
RCH Manufactured in cermet thick fi lm technology, these power resistors exhibit remarkable characteristics and the series includes 4 types ranging from 5 W to 50 W Designed to be mounted onto a heatsink,
Example: DC Motor Speed Modeling
Page 1 of 5 Example: DC Motor Speed Modeling Physical setup and system equations Design requirements MATLAB representation and open-loop response Physical setup and system equations A common actuator in
SC-1000/2000 ROTARY CODED SWITCHES S C T B FEATURES PART NUMBER DESIGNATION. Please refer to the LIST OF PART NUMBERS when placing orders.
SC-00/2000 RoHS compliant INTERNAL STRUCTURE SC-00 / 2000 series 4 2 3 6 7 5 FEATURES Part name Material Flammability Housing Metallic spring O ring Insert rotor Polyphenylenesulphide Stainless (SUS 30)
Power Resistor for Mounting onto a Heatsink Thick Film Technology
Power Resistor for Mounting onto a Heatsink Thick Film Technology FEATURES LPS high power: 1100 W Wide resistance range: 1 to 1.3 k E24 series Non inductive Easy mounting Low thermal radiation of the case
ME 3210 Mechatronics II Laboratory Lab 4: DC Motor Characteristics
ME 3210 Mechatronics II Laboratory Lab 4: DC Motor Characteristics Introduction Often, due to budget constraints or convenience, engineers must use whatever tools are available to create new or improved
TF Series Miniature Snap-acting Switches
Features/Benefits Broad range of operating forces Ratings up to 21 AMPS Wide variety of actuator styles Quick connect terminations Typical Applications Motor controls Thermostatics Portable tools Specifications
DSC HW 3: Assigned 6/25/11, Due 7/2/12 Page 1
DSC HW 3: Assigned 6/25/11, Due 7/2/12 Page 1 Problem 1 (Motor-Fan): A motor and fan are to be connected as shown in Figure 1. The torque-speed characteristics of the motor and fan are plotted on the same
Inertia Identification and Auto-Tuning. of Induction Motor Using MRAS
Inertia Identification and Auto-Tuning of Induction Motor Using MRAS Yujie GUO *, Lipei HUANG *, Yang QIU *, Masaharu MURAMATSU ** * Department of Electrical Engineering, Tsinghua University, Beijing,
MECHATRONICS ENGINEERING TECHNOLOGY. Modeling a Servo Motor System
Modeling a Servo Motor System Definitions Motor: A device that receives a continuous (Analog) signal and operates continuously in time. Digital Controller: Discretizes the amplitude of the signal and also
RESOLVER (D/R) CONVERTERS
HIGH POWER 1-BIT digital-to- RESOLVER (D/R) CONVERTERS FEATURES Make sure the next Card you purchase has... VA Drive Capacity 8-Bit/-Byte Double Buffered Transparent Latch Resolution: 1 Bits Accuracy:
ECE 5670/6670 Lab 8. Torque Curves of Induction Motors. Objectives
ECE 5670/6670 Lab 8 Torque Curves of Induction Motors Objectives The objective of the lab is to measure the torque curves of induction motors. Acceleration experiments are used to reconstruct approximately
DYNAMIC ANALYSIS OF DRIVE MECHANISM WITH FUNCTIONAL MODEL
DYNAMIC ANALYSIS OF DRIVE MECHANISM WITH FUNCTIONAL MODEL Yasunobu Uchino Department of Mechanical Engineering, Hosei University 3-7-2 Kajinocho, Koganei-shi, TOKYO, JAPAN Tatsuhito Aihara Department of
Robotics I. Classroom Test November 21, 2014
Robotics I Classroom Test November 21, 2014 Exercise 1 [6 points] In the Unimation Puma 560 robot, the DC motor that drives joint 2 is mounted in the body of link 2 upper arm and is connected to the joint
Example: Modeling DC Motor Position Physical Setup System Equations Design Requirements MATLAB Representation and Open-Loop Response
Page 1 of 5 Example: Modeling DC Motor Position Physical Setup System Equations Design Requirements MATLAB Representation and Open-Loop Response Physical Setup A common actuator in control systems is the
Revision Guide for Chapter 15
Revision Guide for Chapter 15 Contents tudent s Checklist Revision otes Transformer... 4 Electromagnetic induction... 4 Generator... 5 Electric motor... 6 Magnetic field... 8 Magnetic flux... 9 Force on
Series CCR-39S Multi-Throw DC-12 GHz, SP9T & SP10T Latching Coaxial Switch
COAX SWITCHES Series CCR-39S PART NUMBER CCR-39S DESCRIPTION Commercial Latching Multi-throw, DC-12GHz The CCR-39Sis a broadband, multi-throw, electromechanical coaxial switch designed to switch a microwave
LAB REPORT: THREE-PHASE INDUCTION MACHINE
LAB REPORT: THREE-PHASE INDUCTION MACHINE ANDY BENNETT 1. Summary This report details the operation, modelling and characteristics of a three-phase induction machine. It attempts to provide a concise overview
DGS 20, DGS 25, DGS 21/22 and DGS 35/34: Incremental Encoders for rough environmental conditions
,, 1/ and 3/34: Incremental Encoders for rough environmental conditions elect your individual encoder! Possible product variations: 1/4 and 3/8 in solid shafts with square flange or servo mount, through
Low-profile Master Type (Slim Type) The thinnest possible body contributes to reduced size, height and weight of the set product
RS NS Low-profile Master Type (Slim Type) The thinnest possible body contributes to reduced size, height and weight of the set product Typical Specifications Items Specifications tolerance ±0% Maximum
DATA SHEET WIEGAND WIRE SENSOR WS-UTS-4-U0, WS-UFS-4-U0
Wiegand Wire Sensor for energy harvesting multiturn encoders using the Wiegand effect to generate energy from a rotating magnetic field 1 Optimized for operation with the multiturn counter module ic-pmx
Wet Tantalum Capacitors, High Energy, Ultra High Capacitance, -55 C to +125 C Operation
Wet Tantalum Capacitors, High Energy, Ultra High Capacitance, -55 C to +125 C Operation FEATURES High energy, very high capacitance design All tantalum, hermetically sealed case Utilizes proven SuperTan
PTF Series Long Life Slide Potentiometer
*RoHS COMPLIANT Features Long life carbon element Assortment of resistance tapers 45 mm, 60 mm and 00 mm travel lengths Single and dual gang elements Long operational life Tracking error within ± db PTF
Chapter 3: Fundamentals of Mechanics and Heat. 1/11/00 Electromechanical Dynamics 1
Chapter 3: Fundamentals of Mechanics and Heat 1/11/00 Electromechanical Dynamics 1 Force Linear acceleration of an object is proportional to the applied force: F = m a x(t) F = force acting on an object
Texas A & M University Department of Mechanical Engineering MEEN 364 Dynamic Systems and Controls Dr. Alexander G. Parlos
Texas A & M University Department of Mechanical Engineering MEEN 364 Dynamic Systems and Controls Dr. Alexander G. Parlos Lecture 6: Modeling of Electromechanical Systems Principles of Motor Operation