Photocoupler Product Data Sheet LTV-340 series LITE-ON DCC RELEASE
|
|
- Deborah Melton
- 5 years ago
- Views:
Transcription
1 Product Data Sheet Spec No. :DS Effective Date: 0/8/08 Revision: A LITE-ON DCC RELEASE BNS-OD-FC00/A LITE-ON Technology Corp. / Optoelectronics No.90,Chien Road, Chung Ho, New Taipei City 8, Taiwan, R.O.C. Tel: Fax: /
2 .0 Amp Output Current IGBT Gate Drive Photocoupler with Rail-to-Rail Output Voltage in Stretched SO6. Description The Photocoupler is ideally suited for driving power IGBTs and MOSFETs used in motor control inverter applications and inverters in power supply system. It contains an AlGaAs LED optically coupled to an integrated circuit with a power output stage. The Photocoupler operational parameters are guaranteed over the temperature range from -0 o C ~ +0 o C.. Features.0 A maximum peak output current 0.8 A minimum peak output current Rail-to-rail output voltage Functional Diagram Pin No. and Internal connection diagram 6 00 ns maximum propagation delay 00 ns maximum propagation delay difference Under Voltage Lock-Out protection (UVLO) with hysteresis kv/us minimum Common Mode Rejection (CMR) at V CM = 00 V Wide operating range: to 0 Volts (V CC) Guaranteed performance over temperature -0 o C ~ +0 o C. SHIELD. Anode. Cathode. GND. Vo (Output) 6. Vcc MSL Level Safety approval: UL 77 recognized with 000 V RMS for minute for LTV-0P and LTV-0W VDE DIN EN Approved V IORM = 89Vpeak for LTV-0P V IORM = 0Vpeak for LTV-0W. Applications IGBT/MOSFET gate drive Uninterruptible power supply (UPS) Truth Table LED VCC-GND (Turn-ON, +ve going) VCC-GND (Turn-OFF, -ve going) OFF 0-0 V 0-0 V Low ON V 0-9. V Low ON.0 -. V 9. - V Transition ON. - 0 V - 0 V High Note: A 0.μF bypass capacitor must be connected between Pin and 6. VO Industrial Inverters AC/Brushless DC motor drives Switching power suppliers / Part No. :
3 . PACKAGE DIMENSIONS. LTV-0W. LTV-0P Notes :. Year date code.. -digit work week.. Factory identification mark (Y : Thailand).. or V for VDE option. * Dimensions are in Millimeters and (Inches). / Part No. :
4 . TAPING DIMENSIONS. LTV-0W-TA. LTV-0W-TA. LTV-0P-TA. LTV-0P-TA Description Symbol Dimension in mm (inch) For W type Dimension in mm (inch) For P type Tape wide W 6±0. (0.6) 6±0. (0.6) Pitch of sprocket holes P 0 ±0. (0.6) ±0. (0.6) Distance of compartment Distance of compartment to compartment F 7.±0. (0.) 7.±0. (0.) P ±0. (0.079) ±0. (0.079) P 6±0. (0.6) ±0. (0.7). Quantities Per Reel Package Type Quantities (pcs) 000 / Part No. :
5 . IEC/EN/DIN EN Insulation Characteristics Description Symbol LTV-0P LTV-0W Unit Climatic Classification /00/ /00/ Pollution Degree (DIN VDE 00/.89) Maximum Working Insulation Voltage V IORM 89 0 V peak Input to Output Test Voltage, Method b* V IORM x.87 = V PR, 00% Production Test with t m = sec, Partial discharge < pc Input to Output Test Voltage, Method a* V IORM x.6 = V PR, Type and Sample Test, tm = 0 sec, Partial discharge < pc Highest Allowable Overvoltage (Transient Overvoltage t ini = 60 sec) V PR 67 7 V peak V PR 6 8 V peak V IOTM V peak Safety-limiting values maximum values allowed in the event of a failure. Case Temperature T S 7 7 o C Input Current I S, INPUT 0 0 ma Output Power P S, OUTPUT mw Insulation Resistance at TS, V IO = 00 V R S >0 9 >0 9 Ω * Refer to the optocoupler section of the Isolation and Control Components Designer s Catalog, under Product Safety Regulations section, (IEC/EN/DIN EN ) for a detailed description of Method a and Method b partial discharge test profiles. Note: These optocouplers are suitable for safe electrical isolation only within the safety limit data. Maintenance of the safety data shall be ensured by means of protective circuits. Surface mount classification is Class A in accordance with CECC Insulation and Safety Related Specification Parameter Symbol LTV-0P LTV-0W Unit Test Condition Minimum External Air Gap (External Clearance) Minimum External Tracking (External Clearance) Tracking Resistance (Comparative Tracking Index) L(0) mm L(0) mm CTI >7 >7 V Measured from input terminals to output terminals, shortest distance through air. Measured from input terminals to output terminals, shortest distance DIN EN 60 (VDE 00 Teil ) / Part No. :
6 . RATING AND CHARACTERISTICS. Absolute Maximum Ratings Photocoupler Parameter Symbol Min Max Unit Note Storage Temperature T stg - + o C Operating Temperature T opr o C Output IC Junction Temperature T J o C Total Output Supply Voltage (V CC V EE) 0 V Average Forward Input Current I F ma Reverse Input Voltage V R V Peak Transient Input Current I F(TRAN).0 A High Peak Output Current I OH(PEAK).0 A Low Peak Output Current I OL(PEAK).0 A Input Current (Rise/Fall Time) t r(in) /t f(in) 00 ns Output Voltage V O(PEAK) V CC V Power Dissipation P I mw Output IC Power Dissipation P O 0 mw Total Power Dissipation P T 9 mw Lead Solder Temperature T sol 60 o C Note: Ambient temperature = o C, unless otherwise specified. Stresses exceeding the absolute maximum ratings can cause permanent damage to the device. Exposure to absolute maximum ratings for long periods of time can adversely affect reliability. Note: Note: A ceramic capacitor (0. μf) should be connected between pin 6 and pin to stabilize the operation of a high gain linear amplifier. Otherwise, this Photocoupler may not switch properly. The bypass capacitor should be placed within cm of each pin. Note : Pulse width (PW) μs, 00 pps Note : Exponential waveform. Pulse width 0. μs, f khz Note : The rise and fall times of the input on-current should be less than 00 ns. Recommended Operating Conditions Parameter Symbol Min Max Unit Operating Temperature T A -0 0 o C Supply Voltage V CC 0 V Input Current (ON) I FL(ON) 7 6 ma Input Voltage (OFF) V F(OFF) V / Part No. :
7 . ELECTRICAL OPTICAL CHARACTERISTICS Parameter Symbol Min. Typ. Max. Unit Test Condition Figure Note Input Forward Voltage V F..7.8 V I F = 0mA Input Forward Voltage Temperature Coefficient ΔV F/ ΔT -.7 mv/ O C I F = 0mA Input Reverse Voltage BV R V I R = 0μA Input Input Threshold Current (Low to High) I FLH.9 ma V CC = 0 V, V O > V 6, 7,8 Input Threshold Voltage (High to Low) V FHL 0.8 V V CC = 0 V, V O < V Input Capacitance C IN pf f = MHz, V F = 0 V High Level Supply Current Low Level Supply Current I CCH.9.0 ma I CCL.0.0 ma I F = 0 ma, V CC = 0V, V O = Open I F = 0 ma, V CC = 0V, V O = Open, High level output current I OH -0. V O = (V CC. V) A V O = (V CC V) Output Low level output current I OL 0. V O = (V EE +. V) A V O = (V EE + V) High level output voltage V OH V CC V CC - 0. V I F = 0mA, I O = -00mA,, Low level output voltage V OL V EE + 0. V EE + 0. V I F = 0mA, I O = 00mA, UVLO Threshold V UVLO V V O > V, I F = 0 ma V UVLO V V O < V, I F = 0 ma 9 UVLO Hysteresis UVLO HYS. V All Typical values at T A = C and V CC V EE = to 0 V, unless otherwise specified; all minimum and maximum specifications are at recommended operating condition. (Refer to.) Note : Maximum pulse width = 0 μs. Note : Maximum pulse width = 0 μs. 6/ Part No. :
8 6. SWITCHING SPECIFICATION Parameter Symbol Min. Typ. Max. Unit Test Condition Figure Note Propagation Delay Time to High Output Level t PLH Propagation Delay Time to t PHL Low Output Level R g = 7Ω, 8, 9, 0, C g = nf,,, Pulse Width Distortion PWD 70 f = 0 khz, 0 Propagation delay difference ns Duty Cycle = 0% between any two parts or channels PDD I F = 7 to 6 ma, V CC = to 0V Output Rise Time (0 to 90%) Tr V EE = ground Output Fall Time (90 to 0%) Tf 0 T A = C, Common mode transient immunity at high level output CM H 0 kv/μs I F = 0 to 6 ma, V CM = 00 V, V CC = 0 V T A = C, Common mode transient immunity at low level output CM L 0 kv/μs V F = 0 V, V CM = 00 V, V CC = 0 V All Typical values at T A = C and V CC V EE = to 0 V, unless otherwise specified; all minimum and maximum specifications are at recommended operating condition. (Refer to.) Note : CM H is the maximum rate of rise of the common mode voltage that can be sustained with the output voltage in the logic high state (V O > V). Note : CM L is the maximum rate of fall of the common mode voltage that can be sustained with the output voltage in the logic low state (V O < V). Note : The difference between t PHL and t PLH between any two parts series parts under same test conditions. 7/ Part No. :
9 7. ISOLATION CHARACTERISTIC Parameter Symbo Device Min. Typ. Max. Unit Test Condition Note Withstand Insulation Test Voltage V ISO LTV-0W LTV-0P 000 V RH 0%-60%, t = min, T A = o C, Input-Output Resistance R I-O 0 Ω V I-O = 00V DC Input-Output Capacitance C I-O 0.9 pf f = MHz, T A = o C All Typical values at T A = C unless otherwise specified. All minimum and maximum specifications are at recommended operating condition. (Refer to.) Note : Device is considered a two terminal device: pins, and are shorted together and pins, and 6 are shorted together. Note : According to UL77, each photocoupler is tested by applying an insulation test voltage 6000V RMS for one second (leakage current less than 0uA). This test is performed before the 00% production test for partial discharge 8/ Part No. :
10 8. TYPICAL PERFORMANCE CURVES & TEST CIRCUITS Photocoupler V OH -High Output Rail Voltage -V I F = 0 ma I OUT = -00mA V CC = 0 V V EE = 0 V TA -Temperature - o C V OH -High Output Voltage Drop -V I F = 0 ma I OUT = -00mA V CC = 0 V V EE = 0 V TA -Temperature - o C Figure : High output rail voltage vs. Temperature Figure : VOH vs. Temperature V OL -Output Low Voltage -V V F (OFF) = 0 V I out = 00 ma 0.0 V CC = 0 V V EE = 0 V T A -Temperature - o C I CC -Supply Current -ma. I F = 0 ma for I CCH 0. V F = 0V for I CCL V CC = 0 V I CCH V EE = 0 V I CCL T A -Tamperature - o C Figure : VOL vs. Temperature Figure : ICC vs. Temperature I CC -Supply Current -ma.. I F = 0 ma for I CCH 0. V F = 0V for I CCL T A = o C I CCH V EE = 0 V I CCL V CC -Supply Voltage -V V O -Output Voltage -V T A = o C V CC = 0 V V EE = 0V I FLH ON I FLH OFF I FLH -Low to High Current Threshold -ma Figure : ICC vs. VCC Figure 6: IFLH Hysteresis 9/ Part No. :
11 L FLH -Low To High Threshold -ma.... I FLH ON 0. V CC = 0 to 0 V V EE = 0 V I FLH OFF T A -Temperature - o C T P -Propagation Delay -ns I F = 8 ma, T A = o C R g = 7Ω, C g = nf Duty Cycle = 0% f = 0kHz V CC -Supply Voltage -V T PLH T PHL Figure 7: IFLH vs. Temperature Figure 8: Propagation Delays vs. VCC T P -Propagation Delay -ns V CC = 0V, V EE = 0V T A = o C R g = 7Ω, C g = nf Duty Cycle = 0% f = 0kHz I F -Forward LED Cureent -ma T PLH T PHL T P -Propagation Delay -ns I 60 F = 8mA V CC = 0V, V EE = 0V 0 R g = 7Ω, C g = nf Duty Cycle = 0% T PLH 0 f = 0kHz T PHL T A -Temperature - o C Figure 9: Propagation Delays vs. IF Figure 0: Propagation Delays vs. Temperature T P -Propagation Delay -ns I F = 8 ma, T A = o C V CC = 0 V, V EE = 0 V 80 C g = nf T Duty Cycle = 0% PLH 70 f = 0kHz T PHL R g -Series Load Resistance -Ω T P -Propagation Delay -ns I F = 8 ma, T A = o C 70 V CC = 0 V, V EE = 0 V 60 R g = 7 Ω T Duty Cycle = 0% PLH f = 0kHz T PHL C g -Series Load Capacitance -nf Figure : Propagation Delays vs. Rg Figure : Propagation Delays vs. Cg 0/ Part No. :
12 60 I F -Forward Current -ma V F -Forward Voltage -V Figure : Input Current vs. Forward Voltage mA I F =7to6mA 0.μF V OH V CC = to 0V 0.μF VOL V CC = to 0V 00mA Figure : VOH Test Circuit Figure : VOL Test Circuit 6 V Pulsed 6 I F =7to6mA 0.μF I OH V CC = to 0V 0.μF IOL V CC = to 0V.V Pulse Figure 6 : IOH Test Circuit Figure 7 : IOL Test Circuit 6 6 IF 0.μF VO>V V CC = to 0V IF I F =7to6mA 0.μF VO>V V CC Figure 8 : IFLH Test Circuit Figure 9 : UVLO Test Circuit / Part No. :
13 6 IF tr tf I F = 7 to 6mA 0kHZ 0% Duty Cycle uf 0.μF V o>v 7Ω nf VCC=0 = to to 0V + - VO tp LH tp HL VOH 90% 0% 0% VOL Figure 0 : tr, tf, tplh and tphl Test Circuit and Waveforms SW A IF B 6 0.uF VO VCC VC M 0V VO SW A: IF=0mA Δt δv δt = VC M Δt VO H VCM Ω + - VO SW B: IF=0mA VO L Figure : CMR Test Circuit and Waveforms / Part No. :
14 9. TEMPERATURE PROFILE OF SOLDERING 9. IR Reflow soldering (JEDEC-STD-00C compliant) Photocoupler One time soldering reflow is recommended within the condition of temperature and time profile shown below. Do not solder more than three times. Profile item Conditions Preheat - Temperature Min (T Smin) - Temperature Max (T Smax) - Time (min to max) (ts) 0 C 00 C 90±0 sec Soldering zone - Temperature (T L) - Time (t L) Peak Temperature (T P) Ramp-up rate Ramp-down rate 7 C 60 ~ 00 sec 60 C C / sec max. ~6 C / sec Ramp-up 0 sec TP 60 C Temperature ( C) Tsmin 0 C TL 7 C Tsmax 00 C sec tl (Soldering) Ramp-down C 60 ~ 0 sec ts (Preheat) Time (sec) / Part No. :
15 9. Wave soldering (JEDECA compliant) Photocoupler One time soldering is recommended within the condition of temperature. Temperature: 60+0/- C Time: 0 sec. Preheat temperature: to 0 C Preheat time: 0 to 80 sec. 9. Hand soldering by soldering iron Allow single lead soldering in every single process. One time soldering is recommended. Temperature: 80+0/- C Time: sec max. / Part No. :
16 0. NAMING RULE Photocoupler Part Number Options LTV-0P-TA LTV-0P-TA LTV-0W-TA LTV-0W-TA LTV0PTA-V LTV0PTA-V LTV0WTA-V LTV0WTA-V Definition of Suffix Remark "0" LiteOn model name "P" "W" "TA" "TA" "V" clearance distance 7mm typical clearance distance 8mm typical Pin location at lower right of the tape Pin location at upper left of the tape VDE approved option. Notes LiteOn is continually improving the quality, reliability, function or design and LiteOn reserves the right to make changes without further notices. The products shown in this publication are designed for the general use in electronic applications such as office automation equipment, communications devices, audio/visual equipment, electrical application and instrumentation. For equipment/devices where high reliability or safety is required, such as space applications, nuclear power control equipment, medical equipment, etc, please contact our sales representatives. When requiring a device for any specific application, please contact our sales in advice. If there are any questions about the contents of this publication, please contact us at your convenience. The contents described herein are subject to change without prior notice. Immerge unit s body in solder paste is not recommended. / Part No. :
1.0 Amp Output Current IGBT Gate Drive Photocoupler with Rail-to-Rail Output Voltage in Stretched SO6
.0 Amp Output Current IGBT Gate Drive Photocoupler with Rail-to-Rail Output Voltage in Stretched SO. Description The Photocoupler is ideally suited for driving power IGBTs and MOSFETs used in motor control
More informationPhotocoupler Product Data Sheet LTV-60L series LITE-ON DCC RELEASE
Product Data Sheet Spec No. :DS7-215-87 Effective Date: 1/18/218 Revision: B LITE-ON DCC RELEASE BNS-OD-FC1/A4 LITE-ON Technology Corp. / Optoelectronics No.9,Chien 1 Road, Chung Ho, New Taipei City 23585,
More informationPhotocoupler Product Data Sheet LTV-M601 Series LITE-ON DCC RELEASE
Product Data Sheet LTV-M61 Series Spec No. :DS7-213-2 Effective Date: 8/16/218 Revision: E LITE-ON DCC RELEASE BNS-OD-FC1/A4 LITE-ON Technology Corp. / Optoelectronics No.9,Chien 1 Road, Chung Ho, New
More informationPhotocoupler Product Data Sheet LTV-0601 Spec No.: DS Effective Date: 07/06/2016 LITE-ON DCC RELEASE
Product Data Sheet LTV-0601 Spec No.: DS70-2013-0015 Effective Date: 07/06/2016 Revision: C LITE-ON DCC RELEASE BNS-OD-FC001/A4 LITE-ON Technology Corp. / Optoelectronics No.90,Chien 1 Road, Chung Ho,
More informationPhotocoupler Product Data Sheet 6N137 series Spec No.: DS Effective Date: 04/25/2014 LITE-ON DCC RELEASE
Photocoupler Product Data Sheet Spec No.: DS70-2008-0035 Effective Date: 04/25/2014 Revision: B LITE-ON DCC RELEASE BNS-OD-FC001/A4 LITE-ON Technology Corp. / Optoelectronics No.90,Chien 1 Road, Chung
More informationPhotocoupler Product Data Sheet LTV-M601 Series Spec No.: DS Effective Date: 07/06/2016 LITE-ON DCC RELEASE
Product Data Sheet LTV-M601 Series Spec No.: DS70-2013-0020 Effective Date: 07/06/2016 Revision: D LITE-ON DCC RELEASE BNS-OD-FC001/A4 LITE-ON Technology Corp. / Optoelectronics No.90,Chien 1 Road, Chung
More informationPhotocoupler Product Data Sheet LTV-100X-G series datasheet Spec No.: DS Effective Date: 11/03/2016 LITE-ON DCC RELEASE
Product Data Sheet LTV-100X-G series datasheet Spec No.: DS70-2013-0012 Effective Date: 11/03/2016 Revision: G LITE-ON DCC RELEASE BNS-OD-FC001/A4 LITE-ON Technology Corp. / Optoelectronics No.90,Chien
More informationHIGH SPEED-10 MBit/s LOGIC GATE OPTOCOUPLERS
DESCRIPTION The / optocouplers consist of an AlGaAS LED, optically coupled to a very high speed integrated photo-detector logic gate with a strobable output. The devices are housed in a compact small-outline
More informationHIGH SPEED TRANSISTOR OPTOCOUPLERS
SINGLECHANNEL: PACKAGE SCHEMATIC N/C V CC + V CC V F + V F 7 V B _ 7 V 0 _ V O _ V 0 V F N/C 4 5 GND + 4 5 GND,,, Pin 7 is not connected in Part Number / DESCRIPTION The /, / and / optocouplers consist
More informationHIGH SPEED TRANSISTOR OPTOCOUPLERS
DESCRIPTION The HCPL05XX, and HCPL04XX optocouplers consist of an AlGaAs LED optically coupled to a high speed photodetector transistor housed in a compact pin small outline package. A separate connection
More informationFOD060L, FOD260L 3.3V/5V High Speed-10 MBit/s Logic Gate Optocouplers
FOD060L, FOD260L 3.3V/5V High Speed-0 MBit/s Logic Gate Optocouplers Features FOD060L in SO and FOD260L in -pin DIP Very high speed 0 MBit/s Superior CMR 50 kv/µs at,000v peak Fan-out of over -40 C to
More informationDistributed by: www.jameco.com -00-- The content and copyrights of the attached material are the property of its owner. HCPL-0/J/0, HCNW0 Intelligent Power Module and Gate Drive Interface Optocouplers
More informationPhotocoupler Product Data Sheet LTV-852 8D52 (M, S, S-TA1, S-TA, S-TP) Series Spec No.: DS Effective Date: 07/09/2013 LITE-ON DCC RELEASE
Photocoupler Product Data Sheet LTV-852 8D52 (M, S, S-TA1, S-TA, S-TP) Series Spec No.: DS-7-96-2 Effective Date: 7/9/213 Revision: G LITE-ON DCC RELEASE BNS-OD-FC1/A4 LITE-ON Technology Corp. / Optoelectronics
More informationOptocoupler, Photodarlington Output, High Gain, With Base Connection
End of Life January-208 - Alternative Device: CNY7 HB, HB2, HB3 Optocoupler, Photodarlington Output, High Gain, With Base Connection FEATURES A C NC 2 3 6 5 4 B C E Isolation test voltage: 4420 V RMS Coupling
More informationTLP250 TLP250. Transistor Inverter Inverter For Air Conditioner IGBT Gate Drive Power MOS FET Gate Drive. Truth Table
TOSHIB Photocoupler Gals Ired & Photo IC TLP20 Transistor Inverter Inverter For ir Conditioner IGBT Gate Drive Power MOS FET Gate Drive Unit in mm The TOSHIB TLP20 consists of a Gals light emitting diode
More informationThrough Hole Lamp Product Data Sheet LTL-403G Spec No.: DS Effective Date: 01/13/2004 LITE-ON DCC RELEASE
Through Hole Lamp Product Data Sheet LTL-403G Spec No.: DS-20-95-0001 Effective Date: 01/13/2004 Revision: A LITE-ON DCC RELEASE BNS-OD-FC001/A4 LITE-ON Technology Corp. / Optoelectronics No.90,Chien 1
More informationMOC8111 MOC8112 MOC8113
PACKAGE SCHEMATIC ANODE 6 N/C 6 6 CATHODE 2 5 COLLECTOR N/C 3 4 EMITTER 6 DESCRIPTION The MOC8X series consists of a Gallium Arsenide IRED coupled with an NPN phototransistor. The base of the transistor
More informationOptocoupler, Phototransistor Output, Single Channel, Half Pitch Mini-Flat Package
TCMT11. Series Optocoupler, Phototransistor Output, Single Channel, Half Pitch Mini-Flat Package 22628-1 C E 4 3 1 2 DESCRIPTION The TCMT11. series consist of a phototransistor optically coupled to a gallium
More informationSDT800-STR. Description. Features. Agency Approvals. Applications. Absolute Maximum Ratings. Schematic Diagram. Ordering Information
Description The consists of two phototransistors, each optically coupled to a light emitting diode for DC input operation. Optical coupling between the input IR LED and output phototransistor allows for
More informationPC410L0NIP Series. High Speed 10Mb/s, High CMR Mini-flat Package OPIC Photocoupler
PC0L0NIP Series High Speed 0Mb/s, High CMR Mini-flat Package OPIC Photocoupler Description PC0L0NIP Series contains a LED optically coupled to an OPIC chip. It is packaged in a pin mini-flat. Input-output
More informationMOCD223M Dual-channel Phototransistor Small Outline Surface Mount Optocouplers
MOCD223M Dual-channel Phototransistor Small Outline Surface Mount Optocouplers Features U.L. Recognized (File #E90700, Volume 2) VDE Recognized (File #13616) (add option V for VDE approval, i.e, MOCD223VM)
More informationGENERAL PURPOSE 6-PIN PHOTOTRANSISTOR OPTOCOUPLERS
4N37 HA HA2 HA3 HA4 HA5 WHITE PACKAGE (-M SUFFIX) SCHEMATIC 2 3 NC PIN. ANODE 2. CATHODE 3. NO CONNECTION 4. EMITTER 5. COLLECTOR. BASE 5 4 BLACK PACKAGE (NO -M SUFFIX) DESCRIPTION The general purpose
More informationPHOTOTRANSISTOR OPTOCOUPLERS
MCT MCTE MCT0 MCT7 MCT00 MCT0 MCT0 WHITE PACKAGE (-M SUFFIX) BLACK PACKAGE (NO -M SUFFIX) DESCRIPTION The MCTXXX series optoisolators consist of a gallium arsenide infrared emitting diode driving a silicon
More informationIS181 DESCRIPTION FEATURES
DESCRIPTION The IS181 series of optocoupler consists of an infrared light emitting diode optically coupled to an NPN silicon photo transistor in a space efficient Mini Flat Package. FEATURES Low Profile
More information4-PIN PHOTOTRANSISTOR OPTOCOUPLERS
PACKAGE HAA84 SCHEMATIC 4 COLLECTOR 4 2 3 EMITTER DESCRIPTION The HAA84 Series consists of two gallium arsenide infrared emitting diodes, connected in inverse parallel, driving a single silicon phototransistor
More informationOptocoupler with Transistor Output
Optocoupler with Transistor Output 17197_4 DESCRIPTION The HS817 series consists of a phototransistor optically coupled to a gallium arsenide infrared-emitting diode in a 4-lead plastic dual inline package.
More informationMOC8101, MOC8102, MOC8103, MOC8104, MOC8105 Optocoupler, Phototransistor Output, no Base Connection
MOC80, MOC80, MOC803, MOC80, MOC80 Optocoupler, Phototransistor Output, no Base Connection i79009- DESCRIPTION The MOC80, MOC80, MOC803, MOC80, MOC80 family optocoupler consisting of a gallium arsenide
More informationOptocoupler, Phototransistor Output, LSOP-4, 110 C Rated, Long Mini-Flat Package
TCLT11. Series Optocoupler, Phototransistor Output, LSOP-4, 11 C Rated, Long Mini-Flat Package 17295-5 DESCRIPTION The TCLT11. series consists of a phototransistor optically coupled to a gallium arsenide
More informationOptocoupler, Phototransistor Output, with Base Connection
Vishay Semiconductors Optocoupler, Phototransistor Output, FEATURES A 6 B Isolation test voltage 5300 V RMS Interfaces with common logic families C NC 2 3 V D E 5 4 C E Input-output coupling capacitance
More informationPHOTO SCR OPTOCOUPLERS
PACKAGE SCHEMATIC 6 6 ANODE 6 GATE CATHODE 2 5 ANODE N/C 3 4 CATHODE 6 DESCRIPTION The HC series consists of a gallium-arsenide infrared emitting diode optically coupled with a light activated silicon
More information4-PIN PHOTOTRANSISTOR OPTOCOUPLERS
PACKAGE HAA84 SCHEMATIC 4 COLLECTOR 4 2 3 EMITTER DESCRIPTION The HAA84 Series consists of two gallium arsenide infrared emitting diodes, connected in inverse parallel, driving a single silicon phototransistor
More informationGENERAL PURPOSE 6-PIN PHOTOTRANSISTOR OPTOCOUPLERS
TIL TIL-M TIL7-M MOC800-M WHITE PACKAGE (-M SUFFIX) SCHEMATIC 2 3 NC 5 4 PIN. ANODE 2. CATHODE 3. NO CONNECTION 4. EMITTER 5. COLLECTOR. BASE BLACK PACKAGE (NO -M SUFFIX) DESCRIPTION The MOC800, TIL and
More informationH11AV1-M H11AV1A-M H11AV2-M H11AV2A-M
PACKAGE OUTLINE SCHEMATIC 6 6 HAVS-M, HAV2S-M 6 HAV-M, HAV2-M 2 3 NC PIN. ANODE 2. CATHODE 3. NO CONNECTION 4. EMITTER 5. COLLECTOR 6. BASE 5 4 6 HAVA-M, HAV2A-M DESCRIPTION The general purpose optocouplers
More informationIS2805 DESCRIPTION FEATURES
DESCRIPTION The is an optically coupled isolator consists of two infrared emitting diodes in reverse parallel connection and optically coupled to an NPN silicon photo transistor. This device belongs to
More informationPHOTODARLINGTON OPTOCOUPLERS
DESCRIPTION The CNX48U, HBX, and TIL3 have a gallium arsenide infrared emitter optically coupled to a silicon planar photodarlington. CNX48U HB HB2 HB255 HB3 TIL3 FEATURES High sensitivity to low input
More informationFODM8801A, FODM8801B, FODM8801C OptoHiT Series, High-Temperature Phototransistor Optocoupler in Half-Pitch Mini-Flat 4-Pin Package
FODM88A, FODM88B, FODM88C OptoHiT Series, High-Temperature Phototransistor Optocoupler in Half-Pitch Mini-Flat 4-Pin Package Features Utilizing Proprietary Process Technology to Achieve High Operating
More informationOptocoupler, Phototransistor Output, no Base Connection
Optocoupler, Phototransistor Output, no Base Connection FEATURES A C NC 1 2 3 6 5 4 NC C E Isolation test voltage, 5 V RMS No base terminal connection for improved common mode interface immunity Long term
More informationLow Voltage 2-1 Mux, Level Translator ADG3232
Low Voltage 2-1 Mux, Level Translator ADG3232 FEATURES Operates from 1.65 V to 3.6 V Supply Rails Unidirectional Signal Path, Bidirectional Level Translation Tiny 8-Lead SOT-23 Package Short Circuit Protection
More informationLED Display Product Data Sheet LTM-0215F Spec No.: DS Effective Date: 11/12/2003 LITE-ON DCC RELEASE
LED Display Product Data Sheet LTM-0215F Spec No.: DS30-2003-205 Effective Date: 11/12/2003 Revision: - LITE-ON DCC RELEASE BNS-OD-FC001/A4 LITE-ON Technology Corp. / Optoelectronics No.90,Chien 1 Road,
More informationOptocoupler, Phototransistor Output, with Base Connection
Vishay Semiconductors Optocoupler, Phototransistor Output, 2842 DESCRIPTION i79004-4 Each optocoupler consists of gallium arsenide infrared LED and a silicon NPN phototransistor. AGENCY APPROVALS Underwriters
More informationTC74LCX08F,TC74LCX08FN,TC74LCX08FT,TC74LCX08FK
TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic TC74LCX08F/FN/FT/FK TC74LCX08F,TC74LCX08FN,TC74LCX08FT,TC74LCX08FK Low-Voltage Quad 2-Input AND Gate with 5-V Tolerant Inputs and Outputs The
More informationNC7SB3157 TinyLogic Low Voltage UHS Analog Switch 2-Channel Multiplexer/Demultiplexer (Preliminary)
September 1999 Revised November 1999 TinyLogic Low Voltage UHS Analog Switch 2-Channel Multiplexer/Demultiplexer (Preliminary) General Description The is a high performance, Analog Switch 2- channel CMOS
More informationMOC205-M MOC206-M MOC207-M MOC208-M
DESCRIPTION These devices consist of a gallium arsenide infrared emitting diode optically coupled to a monolithic silicon phototransistor detector, in a surface mountable, small outline, plastic package.
More informationPHOTOTRANSISTOR OPTOCOUPLERS
DESCRIPTION The CNY7 series consists of a Gallium Arsenide IRED coupled with an NPN phototransistor. FEATURES CNY7-/2/3 are also available in white package by specifying -M suffix (eg. CNY7-2-M) UL recognized
More informationPhototransistor. Industry Standard Single Channel 6 Pin DIP Optocoupler
Phototransistor Industry Standard Single Channel 6 Pin DIP Optocoupler DEVICE TYPES Part No. CTR % Min. Part No. CTR % Min. 4N25 2 MCT2 2 4N26 2 MCT2E 2 4N27 MCT27 5 4N28 MCT27 45 9 4N35 MCT272 75 5 4N36
More informationIs Now Part of To learn more about ON Semiconductor, please visit our website at
Is Now Part of To learn more about ON Semiconductor, please visit our website at www.onsemi.com ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC
More informationCD4028BC BCD-to-Decimal Decoder
BCD-to-Decimal Decoder General Description The is a BCD-to-decimal or binary-to-octal decoder consisting of 4 inputs, decoding logic gates, and 10 output buffers. A BCD code applied to the 4 inputs, A,
More informationSC1301A/B. 2A High Speed Low-Side MOSFET Driver in SOT-23 POWER MANAGEMENT. Applications. Typical Application Circuit
查询 SC1301B 供应商 Description The is a cost effective single-channel highspeed MOSFET driver. The driver is capable of driving a 1000pF load in 0ns rise/fall time and has a 60ns propagation delay time from
More informationCNY64/ CNY65/ CNY66. Optocoupler with Phototransistor Output. Vishay Telefunken. Description. Applications. VDE Standards
Optocoupler with Phototransistor Output Description The CNY64/ CNY65/ CNY66 consist of a phototransistor optically coupled to a gallium arsenide infrared-emitting diode in a 4-lead plastic package. The
More informationMM74C14 Hex Schmitt Trigger
MM74C14 Hex Schmitt Trigger General Description The MM74C14 Hex Schmitt Trigger is a monolithic complementary MOS (CMOS) integrated circuit constructed with N- and P-channel enhancement transistors. The
More informationMM74HC154 4-to-16 Line Decoder
4-to-16 Line Decoder General Description The MM74HC154 decoder utilizes advanced silicon-gate CMOS technology, and is well suited to memory address decoding or data routing applications. It possesses high
More informationMM74C00 MM74C02 MM74C04 Quad 2-Input NAND Gate Quad 2-Input NOR Gate Hex Inverter
MM74C00 MM74C02 MM74C04 Quad 2-Input NAND Gate Quad 2-Input NOR Gate Hex Inverter General Description The MM74C00, MM74C02, and MM74C04 logic gates employ complementary MOS (CMOS) to achieve wide power
More informationMM74HC139 Dual 2-To-4 Line Decoder
MM74HC139 Dual 2-To-4 Line Decoder General Description The MM74HC139 decoder utilizes advanced silicon-gate CMOS technology, and is well suited to memory address decoding or data routing applications.
More information9A HIGH-SPEED MOSFET DRIVERS
9A HIGH-SPEED MOSFET DRIVERS 9A HIGH-SPEED MOSFET DRIVERS FEATURES Tough CMOS Construction High Peak Output Current.................. 9A High Continuous Output Current........ 2A Max Fast Rise and Fall
More informationMM74C00 MM74C02 MM74C04 Quad 2-Input NAND Gate Quad 2-Input NOR Gate Hex Inverter
MM74C00 MM74C02 MM74C04 Quad 2-Input NAND Gate Quad 2-Input NOR Gate Hex Inverter General Description The MM74C00, MM74C02, and MM74C04 logic gates employ complementary MOS (CMOS) to achieve wide power
More informationCNY17 Series. Optocoupler with Phototransistor Output. Vishay Telefunken. Description. Applications. VDE Standards.
Optocoupler with Phototransistor Output Description The CNY7 series consists of a phototransistor optically coupled to a gallium arsenide infrared-emitting diode in a 6-lead plastic dual inline package.
More informationILD620/ 620GB / ILQ620/ 620GB
Optocoupler, Phototransistor Output, AC Input (Dual, Quad Channel) Features Identical Channel to Channel Footprint ILD620 Crosses to TLP620-2 ILQ620 Crosses to TLP620-4 High Collector-Emitter Voltage,
More informationMM74HC74A Dual D-Type Flip-Flop with Preset and Clear
MM74HC74A Dual D-Type Flip-Flop with Preset and Clear General Description The MM74HC74A utilizes advanced silicon-gate CMOS technology to achieve operating speeds similar to the equivalent LS-TTL part.
More informationCD40106BC Hex Schmitt Trigger
CD40106BC Hex Schmitt Trigger General Description The CD40106BC Hex Schmitt Trigger is a monolithic complementary MOS (CMOS) integrated circuit constructed with N and P-channel enhancement transistors.
More information74F153 Dual 4-Input Multiplexer
74F153 Dual 4-Input Multiplexer General Description The F153 is a high-speed dual 4-input multiplexer with common select inputs and individual enable inputs for each section. It can select two lines of
More informationPHOTOTRANSISTOR OPTOCOUPLERS
DESCRIPTION The CNY7 series consists of a Gallium Arsenide IRED coupled with an NPN phototransistor. FEATURES CNY7-/2/3 are also available in white package by specifying -M suffix (eg. CNY7-2-M) UL recognized
More informationMM74C908 Dual CMOS 30-Volt Relay Driver
Dual CMOS 30-Volt Relay Driver General Description The MM74C908 is a general purpose dual high voltage driver capable of sourcing a minimum of 250 ma at V OUT = V CC 3V, and T J = 65 C. The MM74C908 consists
More informationSN54HC682, SN74HC682 8-BIT MAGNITUDE COMPARATORS
SCLS0C MARCH 9 REVISED MAY 99 Compare Two -Bit Words 00-kΩ Pullup Resistors Are on the Q Inputs Package Options Include Plastic Small-Outline (DW) and Ceramic Flat (W) Packages, Ceramic Chip Carriers (FK),
More informationSY10/100EL11V. General Description. Precision Edge. Features. Pin Names. 5V/3.3V 1:2 Differential Fanout Buffer. Revision 10.0
SY10/100EL11 5/3.3 1:2 Differential Fanout Buffer Revision 10.0 General Description The SY10/100EL11 are 1:2 differential fanout gates. These devices are functionally similar to the E111A/L devices, with
More information74F109 Dual JK Positive Edge-Triggered Flip-Flop
Dual JK Positive Edge-Triggered Flip-Flop General Description The F109 consists of two high-speed, completely independent transition clocked JK flip-flops. The clocking operation is independent of rise
More informationMM74HC4020 MM74HC Stage Binary Counter 12-Stage Binary Counter
February 1984 Revised February 1999 MM74HC4020 MM74HC4040 14-Stage Binary Counter 12-Stage Binary Counter General Description The MM74HC4020, MM74HC4040, are high speed binary ripple carry counters. These
More informationMM74HC08 Quad 2-Input AND Gate
Quad 2-Input AND Gate General Description The MM74HC08 AND gates utilize advanced silicon-gate CMOS technology to achieve operating speeds similar to LS-TTL gates with the low power consumption of standard
More information74F30 8-Input NAND Gate
8-Input NAND Gate General Description This device contains a single gate, which performs the logic NAND function. April 1988 Revised October 2000 74F30 8-Input NAND Gate Ordering Code: Order Number Package
More informationTCLT10.. Series. Optocoupler with Phototransistor Output. Vishay Semiconductors. Description. Applications. VDE Standards
Optocoupler with Phototransistor Output Description The TCLT1.. Series consists of a phototransistor optically coupled to a gallium arsenide infraredemitting diode in a 4-lead SO6L package. The elements
More informationMM74HC151 8-Channel Digital Multiplexer
8-Channel Digital Multiplexer General Description The MM74HC151 high speed Digital multiplexer utilizes advanced silicon-gate CMOS technology. Along with the high noise immunity and low power dissipation
More informationRP mA, Ultra-Low Noise, Ultra-Fast CMOS LDO Regulator. General Description. Features. Applications. Ordering Information. Marking Information
RP122 3mA, Ultra-Low Noise, Ultra-Fast CMOS LDO Regulator General Description The RP122 is designed for portable RF and wireless applications with demanding performance and space requirements. The RP122
More informationNTE74HC109 Integrated Circuit TTL High Speed CMOS, Dual J K Positive Edge Triggered Flip Flop w/set & Reset
NTE74HC109 Integrated Circuit TTL High Speed CMOS, Dual J K Positive Edge Triggered Flip Flop w/set & Reset Description: The NTE74HC109 is a dual J K flip flip with set and reset in a 16 Lead plastic DIP
More informationMM74C14 Hex Schmitt Trigger
MM74C14 Hex Schmitt Trigger General Description The MM74C14 Hex Schmitt Trigger is a monolithic complementary MOS (CMOS) integrated circuit constructed with N- and P-channel enhancement transistors. The
More informationMM74HC32 Quad 2-Input OR Gate
Quad 2-Input OR Gate General Description The MM74HC32 OR gates utilize advanced silicon-gate CMOS technology to achieve operating speeds similar to LS-TTL gates with the low power consumption of standard
More informationLow Power Quint Exclusive OR/NOR Gate
100307 Low Power Quint Exclusive OR/NOR Gate General Description The 100307 is monolithic quint exclusive-or/nor gate. The Function output is the wire-or of all five exclusive-or outputs. All inputs have
More information74F174 Hex D-Type Flip-Flop with Master Reset
74F174 Hex D-Type Flip-Flop with Master Reset General Description The 74F174 is a high-speed hex D-type flip-flop. The device is used primarily as a 6-bit edge-triggered storage register. The information
More informationMM74HC175 Quad D-Type Flip-Flop With Clear
Quad D-Type Flip-Flop With Clear General Description The MM74HC175 high speed D-type flip-flop with complementary outputs utilizes advanced silicon-gate CMOS technology to achieve the high noise immunity
More informationMM74HC573 3-STATE Octal D-Type Latch
MM74HC573 3-STATE Octal D-Type Latch General Description The MM74HC573 high speed octal D-type latches utilize advanced silicon-gate P-well CMOS technology. They possess the high noise immunity and low
More information74HC1GU04GV. 1. General description. 2. Features. 3. Ordering information. Marking. 5. Functional diagram. Inverter
Rev. 5 1 July 27 Product data sheet 1. General description 2. Features 3. Ordering information The is a high-speed Si-gate CMOS device. It provides an inverting single stage function. The standard output
More informationCD4528BC Dual Monostable Multivibrator
Dual Monostable Multivibrator General Description The CD4528BC is a dual monostable multivibrator. Each device is retriggerable and resettable. Triggering can occur from either the rising or falling edge
More informationMM74HC373 3-STATE Octal D-Type Latch
3-STATE Octal D-Type Latch General Description The MM74HC373 high speed octal D-type latches utilize advanced silicon-gate CMOS technology. They possess the high noise immunity and low power consumption
More informationDS34C87T CMOS Quad TRI-STATE Differential Line Driver
DS34C87T CMOS Quad TRI-STATE Differential Line Driver General Description The DS34C87T is a quad differential line driver designed for digital data transmission over balanced lines The DS34C87T meets all
More informationTC74HC74AP,TC74HC74AF,TC74HC74AFN
TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic TC74HC74AP/AF/AFN TC74HC74AP,TC74HC74AF,TC74HC74AFN Dual D-Type Flip Flop Preset and Clear The TC74HC74A is a high speed CMOS D FLIP FLOP fabricated
More informationMM74HC138 3-to-8 Line Decoder
3-to-8 Line Decoder General Description The MM74HC138 decoder utilizes advanced silicon-gate CMOS technology and is well suited to memory address decoding or data routing applications. The circuit features
More informationPHOTOVOLTAIC SOLID-STATE RELAY OPTOCOUPLERS
PACKAGE SCHEMATIC ANODE 6 DRAIN 6 CATHODE 2 5 6 N/C 3 4 DRAIN DESCRIPTION The HSR32 and HSR42 devices consist of a AlGaAs infrared emitting diode optically coupled to a power MOSFET detector which is driven
More informationDM7404 Hex Inverting Gates
DM7404 Hex Inverting Gates General Description This device contains six independent gates each of which performs the logic INVERT function. Ordering Code: August 1986 Revised February 2000 DM7404 Hex Inverting
More informationMM74HC244 Octal 3-STATE Buffer
MM74HC244 Octal 3-STATE Buffer General Description The MM74HC244 is a non-inverting buffer and has two active low enables (1G and 2G); each enable independently controls 4 buffers. This device does not
More informationMM74HC251 8-Channel 3-STATE Multiplexer
8-Channel 3-STATE Multiplexer General Description The MM74HC251 8-channel digital multiplexer with 3- STATE outputs utilizes advanced silicon-gate CMOS technology. Along with the high noise immunity and
More informationMM74HC00 Quad 2-Input NAND Gate
MM74HC00 Quad 2-Input NAND Gate General Description The MM74HC00 NAND gates utilize advanced silicon-gate CMOS technology to achieve operating speeds similar to LS-TTL gates with the low power consumption
More informationMM74HC373 3-STATE Octal D-Type Latch
MM74HC373 3-STATE Octal D-Type Latch General Description The MM74HC373 high speed octal D-type latches utilize advanced silicon-gate CMOS technology. They possess the high noise immunity and low power
More informationCD40174BC CD40175BC Hex D-Type Flip-Flop Quad D-Type Flip-Flop
Hex D-Type Flip-Flop Quad D-Type Flip-Flop General Description The CD40174BC consists of six positive-edge triggered D- type flip-flops; the true outputs from each flip-flop are externally available. The
More informationILD1/ 2/ 5 / ILQ1/ 2/ 5
ILD/ 2/ 5 / ILQ/ 2/ 5 Optocoupler, Phototransistor Output (Dual, Quad hannel) Features urrent Transfer Ratio at I F = 0 m Isolation Test Voltage, 5300 V RMS Lead-free component omponent in accordance to
More informationMM74HC164 8-Bit Serial-in/Parallel-out Shift Register
8-Bit Serial-in/Parallel-out Shift Register General Description Ordering Code: September 1983 Revised February 1999 The MM74HC164 utilizes advanced silicon-gate CMOS technology. It has the high noise immunity
More informationMM74HC574 3-STATE Octal D-Type Edge-Triggered Flip-Flop
3-STATE Octal D-Type Edge-Triggered Flip-Flop General Description The MM74HC574 high speed octal D-type flip-flops utilize advanced silicon-gate P-well CMOS technology. They possess the high noise immunity
More informationRIGHT ANGLE SURFACE MOUNT INFRARED PHOTOTRANSISTOR
PACKAGE DIMENSIONS.16 (3.).11 (.8).43 (1.1).3 (.9) FRONT. (.).87 (.).71 (1.8).39 (1.).87 (.).71 (1.8) TOP.3 (.9) R.17 (.4) COLLECTOR MARK 1 NOTE:.16 (.4) BACK 1. Emitter. Collector 3. Tolerance of ±.1
More informationFIN1531 5V LVDS 4-Bit High Speed Differential Driver
FIN1531 5V LVDS 4-Bit High Speed Differential Driver General Description This quad driver is designed for high speed interconnects utilizing Low Voltage Differential Signaling (LVDS) technology. The driver
More informationA I DM. W/ C V GS Gate-to-Source Voltage ± 16. Thermal Resistance Symbol Parameter Typ. Max. Units
V DSS 40 V V GS Max ± 6 V R DS(on) max (@V GS = V) 56 mω G 3 D PD - 96309A HEXFET Power MOSFET R DS(on) max (@V GS = 4.5V) Application(s) Load/ System Switch DC Motor Drive 78 mω S 2 Micro3 TM (SOT-23)
More informationSGM7SZ00 Small Logic Two-Input NAND Gate
GENERAL DESCRIPTION The SGM7SZ00 is a single two-input NAND gate from SGMICRO s Small Logic series. The device is fabricated with advanced CMOS technology to achieve ultra-high speed with high output drive
More informationLogic Configuration Part Number Package Type Packing Method Quantity. IX4423N 8-Pin SOIC Tube 100 IX4423NTR 8-Pin SOIC Tape & Reel 2000
IX23-IX2-IX25 3-mpere Dual Low-Side Ultrafast MOSFET Drivers Features 3 Peak Output Current Wide Operating Voltage Range:.5V to 35V - C to +25 C Operating Temperature Range Latch-up Protected to 3 Fast
More informationBSS84 P-Channel Enhancement Mode Field-Effect Transistor
BSS8 P-Channel Enhancement Mode Field-Effect Transistor Features -. A, - V, R DS(ON) = Ω at V GS = - V Voltage-Controlled P-Channel Small-Signal Switch High-Density Cell Design for Low R DS(ON) High Saturation
More information