PHOTO SCR OPTOCOUPLERS

Size: px

Start display at page:

Download "PHOTO SCR OPTOCOUPLERS"

Sheila Lynch
5 years ago
Views:

1 PACKAGE SCHEMATIC 6 6 ANODE 6 GATE CATHODE 2 5 ANODE N/C 3 4 CATHODE 6 DESCRIPTION The HC series consists of a gallium-arsenide infrared emitting diode optically coupled with a light activated silicon controlled rectifier in a dual-in-line package FEATURES High efficiency, low degradation, liquid epitaxial LED Underwriters Laboratory (UL) recognized fl File #E90700 VDE recognized (File #94766) ordering option.300. (e.g., HC.300) 200V/400V Peak blocking voltage High isolation voltage V AC (RMS) APPLICATIONS Low power logic circuits Telecommunications equipment Portable electronics Solid state relays Interfacing coupling systems of different potentials and impedances. 0 A, T 2 L compatible, solid state relay 25 W logic indicator lamp driver 200 V symmetrical transistor coupler (HC, HC2, HC3) 400 V symmetrical transistor coupler (HC4, HC5, HC6) Page of

2 Parameter Symbol Device Value Units TOTAL DEVICE Storage Temperature T STG All -55 to +50 C Operating Temperature T OPR All -55 to +00 C Lead Solder Temperature T SOL All 260 for 0 sec C EMITTER Continuous Forward Current I F All 60 ma Reverse Voltage V R All 6 V Forward Current - Peak ( µs pulse, 300 pps) I F(pk) All 3.0 A LED Power Dissipation 00 mw P D All Derate above 25 C.33 mw/ C DETECTOR Power Dissipation (ambient) 400 mw P D All Derate linearly above 25 C ambient 5.3 mw/ C Power Dissipation (case) W P D All Derate linearly above 25 C case 3.3 mw/ C Peak Reverse Gate Voltage V GR All 6 V RMS On-State Current I DM (RMS) All 300 ma Peak On-State Current (00 µs, % duty cycle) I DM (Peak) All 0 A Surge Current (0ms) I DM (Surge) All 5 A Peak Forward Voltage V DM HC, HC2, HC3 200 V Peak Forward Voltage V DM HC4, HC5, HC6 400 V Page 2 of

3 ELECTRICAL CHARACTERISTICS (T A = 25 C Unless otherwise specified.) INDIVIDUAL COMPONENT CHARACTERISTICS Parameter Test Conditions Symbol Device Min Typ* Max Unit EMITTER Input Forward Voltage I F = 0 ma V F All.2.5 V Reverse Leakage Current V R = 3 V I R All 0 µa Capacitance V F = 0 V, f =.0 MHz C J All 50 pf DETECTOR Off-State Voltage R GK = 0kΩ, T A = 00 C, I D = 50µA HC, HC2, HC3 200 V DM R GK = 0kΩ, T A = 00 C, I D = 50µA HC4, HC5, HC6 400 R GK = 0kΩ,T A = 00 C, I R = 50µA HC, HC2, HC3 200 Reverse Voltage V RM V R GK = 0kΩ,T A = 00 C, I R = 50µA HC4, HC5, HC6 400 On-State Voltage I TM = 300 ma V TM All.2.3 V Off-State Current Reverse Current V DM = 200V, T A = 00 C, I F = 0 ma, R GK = 0kΩ V DM = 400V, T A = 00 C, I F = 0 ma, R GK = 0kΩ V RM = 200 V, T A = 00 C, I F = 0 ma, R GK = 0kΩ V RM = 400 V, T A = 00 C, I F = 0 ma, R GK = 0kΩ I DM HC, HC2, HC3 50 µa HC4, HC5, HC6 50 I RM HC, HC2, HC3 50 HC4, HC5, HC6 50 V µa TRANSFER CHARACTERISTICS (T A = 25 C Unless otherwise specified.) Characteristics Test Conditions Symbol Device Min Typ* Max Units Input Current to Trigger Coupled dv/dt, input to output (figure 8) *Typical values at T A = 25 C V AK = 50 V, R GK = 0 kω V AK = 00 V, R GK = 27 kω I FT HC,HC2, HC4, HC5 20 HC3, HC6 30 ma HC,HC2, HC4, HC5 HC3, HC6 4 dv/dt ALL 500 V/µS Page 3 of

4 ISOLATION CHARACTERISTICS Characteristic Test Conditions Symbol Min Typ* Max Units Isolation Voltage (t = min.) (note ) V ISO 5300 V Isolation Resistance (note ) (V I-O = 500 VDC) R ISO 0 Ω Isolation Capacitance (note ) (f = MHz, V I-O = 0) C I-O 0.8 pf *Typical values at T A = 25 C Note. For this test, LED pins and 2 are common, and SCR pins 4, 5 and 6 are common. Page 4 of

5 I FT, INPUT TRIGGER CURRENT, NORMALIZED I DM, OFF-STATE FORWARD CURRENT, NORMALIZED FORWARD CURRENT - IF (ma) I FT, NORMALIZED TRIGGER CURRENT PHOTO SCR OPTOCOUPLERS Figure. LED Forward Current vs. Forward Voltage Figure 2. Trigger Current vs Anode-Cathode Voltage R GK = 300 ohm 0 0 R GK = K TA = 25 C TA = 00 C TA = -40 C R GK = 0K R GK = 27K R GK = 56K FORWARD VOLTAGE - VF (V) NORMALIZED TO V AK = 50V R GK = 0K T A = 25 o C V AK, ANODE-CATHODE VOLTAGE (V) Figure 3. Input Trigger Current vs. Temperature 000 Figure 4. Off-State Current vs. Temperature R GK = 300 ohm 0 R GK = K 00 V AK = 400V R GK = 0K 0 R GK = 27K V AK = 200V NORMALIZED TO R GK = 56K T A = 25 o C R GK = 0K V AK = 50V T A, AMBIENT TEMPERATURE ( o C) V AK = 50V NORMALIZED TO o T A = 25 C V AK = 50V T A, AMBIENT TEMPERATURE ( o C) Page 5 of

6 I H, HOLDING CURRENT (µa) V DM, FORWARD BLOCKING VOLTAGE (V) ON-STATE CURRENT - ITM (ma) PHOTO SCR OPTOCOUPLERS Figure 5. Forward Blocking Voltage, V DM vs. Temperature Figure 6. On-State Characteristics R GK = 0K, 20K R GK = 50K 500 R GK = 00K TA = 25 C TA = 00 C T A, AMBIENT TEMPERATURE ( o C) ON-STATE VOLTAGE - VTM (V) Figure 7. Holding Current, I H vs. Temperature 0000 R GK = 300 ohm 000 R GK = K 00 R GK = 0K R GK = 27K R GK = 56K T A, AMBIENT TEMPERATURE ( o C) Page 6 of

7 TYPICAL APPLICATIONS 0A, T 2 L COMPATIBLE, SOLID STATE RELAY LOAD Use of the HC4 for high sensitivity, 5300 V isolation capability, provides this highly reliable solid state relay design. This design is compatible with 74, 74S and 74H series T 2 L logic systems inputs and 20V AC (HC, HC2, HC3) or 220V AC (HC4, HC5, HC6) loads up to 0A. +5V "COIL" 470 Ω HCX 56K IN5060 (4) 00 Ω SC46D 47 Ω 47 Ω 0. µf "CONTACT" 20 VAC (HC, HC2, HC3) 220 VAC (HC4, HC5, HC6) 25W, LOGIC INDICATOR LAMP DRIVER The high surge capability and non-reactive input characteristics of the HC allow it to directly couple, without buffers, T 2 L and DTL logic to indicator alarm devices, without danger of introducing noise and logic glitches. +5V LOGIC INPUT 470 Ω HCX 00 Ω INDICATOR LAMP 20 VAC (HC, HC2, HC3) 220 VAC (HC4, HC5, HC6) 56K 0. µf 200V/400V SYMMETRICAL TRANSISTOR COUPLER Use of the high voltage PNP portion of the HC provides a 400V transistor capable of conducting positive and negative signals with current transfer ratios of over %. This function is useful in remote instrumentation, high voltage power supplies and test equipment. Care should be taken not to exceed the HC 400mW power dissipation rating when used at high voltages. INPUT HCX OUTPUT Vp = 800 Volts tp =.00 Seconds f = 25 Hertz TA = 25 C +00 VAC 00 Ω + HC4 H Vp.63 Vp - Vp 0 KΩ tp dv / dt EXPONENTIAL OSCILLOSCOPE RAMP GEN. Fig. 8 Coupled dv/dt - Test Circuit Page 7 of

8 Package Dimensions (Through Hole) Package Dimensions (Surface Mount) PIN ID (8.89) (8.38) (6.86) (6.0) 3 2 PIN ID (6.86) (6.0) SEATING PLANE (.78) (.4) (8.89) (8.38) (.78) (.4) (7.62) TYP (5.08) 0.5 (2.92) (5.08) 0.65 (4.8) 0.06 (0.4) (0.20) 0.54 (3.90) 0.00 (2.54) (0.56) 0.06 (0.4) 0.00 (2.54) TYP (0.5) MIN 0.06 (0.40) (0.20) 0 to (7.62) TYP (0.56) 0.06 (0.4) (0.5) MIN 0.00 (2.54) TYP Lead Coplanarity : (0.0) MAX 0.06 (0.40) MIN 0.35 (8.00) MIN (0.30) MAX Package Dimensions (0.4 Lead Spacing) Recommended Pad Layout for Surface Mount Leadform (6.86) (6.0) (.78) (.52) (8.89) (8.38) SEATING PLANE (5.08) 0.35 (3.43) (.78) (.4) 0.45 (0.54) (7.49) 0.00 (2.54) (0.76) 0.54 (3.90) 0.00 (2.54) (0.0) MIN 0.06 (0.40) (0.20) (0.56) 0.06 (0.4) 0.00 (2.54) TYP (0.6) TYP 0 to 5 Note All dimensions are in inches (millimeters) Page 8 of

9 ORDERING INFORMATION Option Order Entry Identifier Description S.S Surface Mount Lead Bend SD.SD Surface Mount; Tape and Reel W.W 0.4" Lead Spacing VDE W.300W VDE 0884, 0.4" Lead Spacing 3S.3S VDE 0884, Surface Mount 3SD.3SD VDE 0884, Surface Mount, Tape and Reel MARKING INFORMATION HC V XX YY K Definitions Fairchild logo 2 Device number VDE mark (Note: Only appears on parts ordered with VDE 3 option See order entry table) 4 Two digit year code, e.g., 03 5 Two digit work week ranging from 0 to 53 6 Assembly package code Page 9 of

10 Carrier Tape Specifications 4.85 ± ± ± 0. Ø.55 ± ± ± ± ± ± ± ± MAX 0.30 ± 0.20 Ø.6 ± 0. User Direction of Feed NOTE All dimensions are in inches (millimeters) Reflow Profile (Black Package, No Suffix) Temperature ( C) C, 0 30 s 225 C peak Time above 83 C, sec Ramp up = 3C/sec Peak reflow temperature: 225 C (package surface temperature) Time of temperature higher than 83 C for seconds One time soldering reflow is recommended Time (Minute) Page 0 of

11 DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein:. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. Page of

MOC8111 MOC8112 MOC8113

MOC8111 MOC8112 MOC8113 PACKAGE SCHEMATIC ANODE 6 N/C 6 6 CATHODE 2 5 COLLECTOR N/C 3 4 EMITTER 6 DESCRIPTION The MOC8X series consists of a Gallium Arsenide IRED coupled with an NPN phototransistor. The base of the transistor