LED Display Product Data Sheet LTM-0215F Spec No.: DS Effective Date: 11/12/2003 LITE-ON DCC RELEASE

Size: px

Start display at page:

Download "LED Display Product Data Sheet LTM-0215F Spec No.: DS Effective Date: 11/12/2003 LITE-ON DCC RELEASE"

Kelly McDaniel
5 years ago
Views:

1 LED Display Product Data Sheet LTM-0215F Spec No.: DS Effective Date: 11/12/2003 Revision: - LITE-ON DCC RELEASE BNS-OD-FC001/A4 LITE-ON Technology Corp. / Optoelectronics No.90,Chien 1 Road, Chung Ho, New Taipei City 23585, Taiwan, R.O.C. Tel: Fax: /

2 FEATURES *4.69 inch (119.3 mm) MATRIX HEIGHT *LOW POWER REQUIREMENT *SOLID STATE RELIABILITY *16 32 ARRAY WITH X-Y SELECT *FULL COLOR DISPLAYS *1/16 DUTY DYNAMIC SCAN METHOD *CONTROL METHOD: SHIFT REGISTER TYPE *COMPATIBLE WITH USASCII AND EBCDIC CODES. *STACKABLE HORIZONTALLY. *CATEGORIZED FOR LUMINOUS INTENSITY. DESCRIPTION The LTM-0215F is a 4.69 inch (119.3 mm) matrix height dot matrix display which are full color applicable displays and addition constant current drivers. Shift register control type. This device uses RED LED chips (AlInGaP epi on a non-transparent GaAs), GREEN LED chips (InGaN epi on transparent sapphire substrade), BLUE LED chips (InGaN epi on a transparent sapphire substrate.). PART NO.: LTM-0215F PAGE: 1 of 11

3 PACKAGE DIMENSIONS NOTES: All dimensions are in millimeters. Tolerances are 0.25 mm (0.01 ) unless otherwise noted PART NO.: LTM-0215F PAGE: 2 of 11

4 INTERNAL CIRCUIT DIAGRAM LITE-ON TECHNOLOGY CORPORATION PART NO.: LTM-0215F PAGE: 3 of 11

5 PIN CONNECTION C N 1 C N 2 C N 3 1 G N D 1 G N D 1 R e x t 5 2 G N D 2 G N D 2 R e x t 1 3 A1 3 A1 3 V r e d 4 C lo c k 4 C lo c k 4 G N D 5 E n a b le 5 E n a b le 5 V g r e e n 6 G r e e n I n 6 G r e e n O u t 6 R e x t 4 7 B lu e I n 7 B lu e O u t 7 V b lu e 8 G N D 8 G N D 8 V b lu e 9 R e d I n 9 R e d O u t 9 R e x t 2 10 L a t c h 10 L a t c h 10 V g r e e n 11 A0 11 A0 11 V d d 12 A2 12 A2 12 V r e d C o n t r o l C o n t r o l 13 R e x t 3 14 G N D 14 G N D 14 R e x t 6 PART NO.: LTM-0215F PAGE: 4 of 11

6 ELECTRICAL / OPTICAL CHARACTERISTICS AT Ta=25 o C Red PARAMETER SYMBOL MIN. TYP. MAX. UNIT TEST CONDITION Average Luminous Intensity IV 5 10 mcd Ip=40mA 1/16Duty Peak Emission Wavelength p 632 nm IF=20mA Spectral Line Half-Width 20 nm IF=20mA Dominant Wavelength d 624 nm IF=20mA Forward Voltage any Dot VF V IF=20mA Reverse Current any Dot IR 100 A VR=5V Luminous Intensity Matching Ratio IV-m 2:1 Ip=32mA 1/16Duty InGaN Green PARAMETER SYMBOL MIN. TYP. MAX. UNIT TEST CONDITION Average Luminous Intensity IV mcd Ip=16mA 1/16Duty Peak Emission Wavelength p 518 nm IF=20mA Spectral Line Half-Width 35 nm IF=20mA Dominant Wavelength d 525 nm IF=20mA Forward Voltage any Dot VF V IF=20mA Reverse Current any Dot IR 100 A VR=5V Luminous Intensity Matching Ratio IV-m 2:1 Ip=16mA 1/16Duty Blue PARAMETER SYMBOL MIN. TYP. MAX. UNIT TEST CONDITION Average Luminous Intensity IV mcd Ip=40mA 1/16Duty Peak Emission Wavelength p 468 nm IF=20mA Spectral Line Half-Width 25 nm IF=20mA Dominant Wavelength d 470 nm IF=20mA Forward Voltage any Dot VF V IF=20mA Reverse Current any Dot IR 100 A VR=5V Luminous Intensity Matching Ratio IV-m 2:1 Ip=32mA 1/16Duty Note: Luminous intensity is measured with a light sensor and filter combination that approximates the CIE (Commision Internationale De L Eclairage) eye-response curve. PART NO.: LTM-0215F PAGE: 5 of 11

7 ABSOLUTE MAXIMUM RATING FOR SHIFT REGISTER AT Ta=25 o C CHARACTERISTIC SYMBOL RATING UNIT Supply Voltage VDD 0~7.0 V Input Voltage VIN -0.4~VDD+0.4 V Output Current per VOUT IOUT 120 ma Output Voltage per VOUT VCE -0.5~9.5 V Clock Frequency fck 25 MHz GND Terminal Current IGND 1920 ma Power Dissipation PD 1.27(T=25 ) 0.61(T=85 ) W Operating Temperature Topr -25 ~45 Storage Temperature Tstg -25 ~85 Solder Temperature 1/16 inch Below Seating Plane for 3 Seconds at 260 RECOMMENDED OPERATING CONDITION (T=-40 ~85 unless otherwise noted) CHARACTERISTIC SYMBOL CONDITION MIN. TYP. MAX. UNIT LED Voltage Red V LED Red V LED Voltage Green V LED Green V LED Voltage Blue V LED Blue V Supply Voltage V DD V Output Voltage V OUT V Output Current I O OUTn I OH SERIAL-OUT I OL SERIAL-OUT Input Voltage V IH 0.7V DD - V DD +0.3 V LATCH Pulse Width V IL V DD tw LAT ma ns CLOCK Pulse Width tw CLK ns Set-up Time for DATA tsetup( D) V DD =4.5~5.5V ns Hold Time for DATA thold( D) ns Set-up Time for LATCH tsetup( L) ns Clock Frequency f CLK Cascde operation - 25 MHz Power Dissipation P D T=85ºC W PART NO.: LTM-0215F PAGE: 6 of 11

8 BLOCK DIAGRAM O U T 0 O U T 1 O U T 1 5 R -E X T I-R E G E N A B L E Q Q Q L A T C H ST D ST D ST D S E R IA L -IN D Q D Q D Q D Q CK CK CK CK S E R IA L -O U T C L O C K TIMING DIAGRAM C L O C K S E R IA L -IN L A T C H E N A B L E O U T 0 O U T 1 O U T 2 5V 0V 5V 0V 5V 0V 5V 0V ON O F F ON O F F ON O F F O U T 1 5 S E R IA L -O U T ON O F F 5V 0V Latches are level sensitive( not edge triggered). Latch-terminal= H level, latches become transparent; Latch-terminal= L level, hold data. ENABLE-terminal= H level, all outputs( OUT0~15) are off. SERIAL-OUT changes state on falling edges of clock. PART NO.: LTM-0215F PAGE: 7 of 11

9 CLOCK SERIAL, OUT, OUTn t r t W C K t f 90% t W C K C L O C K 10% t s e tu p t h o ld S E R IA L IN t or t of 90% 90% O U T n (c u rre n t) 10% t plh t p H L 10% S E R IA L O U T, t p H L t plh Clock - LATCH C L O C K S E R IA L IN "L " le v e l = D A T A H O L D L A T C H t s e tu p t h o ld (L ) PART NO.: LTM-0215F PAGE: 8 of 11

10 Io ut( m A ) LITE-ON TECHNOLOGY CORPORATION ENABLE - OUTn E N A B L E t plh t p H L O U T n 100 Io u t-r e x t R e x t( o h m ) PART NO.: LTM-0215F PAGE: 9 of 11

11 74138 ELECTRICAL CHARACTERISTICS AT Ta=25 o C Function Table INPUT OUTPUT E 1 E 2 E 3 A 0 A 1 A 2 Y 0 Y 1 Y 2 Y 3 Y 4 Y 5 Y 6 Y 7 H X X X X X H H H H H H H H X H X X X X H H H H H H H H X X L X X X H H H H H H H H L L H L L L L H H H H H H H L L H H L L H L H H H H H H L L H L H L H H L H H H H H L L H H H L H H H L H H H H L L H L L H H H H H L H H H L L H H L H H H H H H L H H L L H L H H H H H H H H L H L L H H H H H H H H H H H L H= HIGH voltage level L= LOW voltage level X= don t care DC CHARACTERISTICS SYMBOL PARAMETER TEST CONDITIONS MIN. TYP. MAX UNIT OTHER Vcc (V) V IH Input High voltage V V IL Input LOW voltage V V OH Output HIGH voltage V I =V IH or V IL ; V I o = -8mA V OL Output LOW voltage- V I =V IH or V IL ; V I o = 8mA PART NO.: LTM-0215F PAGE: 10 of 11

12 74138 AC CHARACTERISTICS LITE-ON TECHNOLOGY CORPORATION SYMBOL PARAMETER TEST CONDITION MIN. TYP. MAX. UNIT. t PHL /t PLH Propagation delay E3 to Yn C L =15pF ns Propagation delay An to Yn Vcc=5.0V ns Propagation delay E1, E2 to Yn ns AC Waveforms A n, E 3 in p u t E 1, E 2 in p u t t P H L t P L H t P H L t P L H Yn Yn PART NO.: LTM-0215F PAGE: 11 of 11

Through Hole Lamp Product Data Sheet LTL-403G Spec No.: DS Effective Date: 01/13/2004 LITE-ON DCC RELEASE

Through Hole Lamp Product Data Sheet LTL-403G Spec No.: DS-20-95-0001 Effective Date: 01/13/2004 Revision: A LITE-ON DCC RELEASE BNS-OD-FC001/A4 LITE-ON Technology Corp. / Optoelectronics No.90,Chien 1