SGM48752 CMOS Analog Multiplexer
|
|
- Nelson Holmes
- 5 years ago
- Views:
Transcription
1 CMOS nalog Multiplexer GENERL DESCRIPTION The is a CMOS analog IC configured as two 4-channel multiplexers. This CMOS device can operate from 2.5V to 5.5V single supplies. Each switch can handle rail-to-rail analog signals. The off-leakage current is only 1n (TYP) at +25. ll digital inputs can support 1.8V logic control I/O. The is available in Green SOIC-16, SSOP-16, TSSOP-16 and TQFN L packages. It operates over an ambient temperature range of -40 to +85. FETURES Guaranteed On-Resistance 48Ω (TYP) with +5V Supply Guaranteed On-Resistance Match Between Channels Low Off-Leakage Current 1n (TYP) at +25 Low On-Leakage Current 1n (TYP) at +25 Optimized Rise Time and Fall Time of, B Control Pins to Reduce Clock Feedthrough Effect 2.5V to 5.5V Single-Supply Operation 1.8V Logic Compatible Low Distortion: 0.7% (R L = 600Ω, f = 20Hz to 20kHz) High Off-Isolation: -83dB (R L =, f = 1MHz) Low Crosstalk: -110dB (f = 1MHz) -40 to +85 Operating Temperature Range vailable in Green SOIC-16, SSOP-16, TSSOP-16 and TQFN L Packages PPLICTIONS Battery-Operated Equipment udio and Video Signal Routing Low-Voltage Data-cquisition Systems Communications Circuits utomotive REV.. 2
2 CMOS nalog Multiplexer PCKGE/ORDERING INFORMTION MODEL PCKGE DESCRIPTION SPECIFIED TEMPERTURE RNGE ORDERING NUMBER PCKGE MRKING PCKING OPTION SOIC to +85 YS16G/TR YS16 XXXXX Tape and Reel, 2500 SSOP to +85 YQS16G/TR TSSOP to +85 YTS16G/TR YQS16 XXXXX YTS16 XXXXX Tape and Reel, 3000 Tape and Reel, 4000 TQFN L -40 to +85 YTQ16G/TR 48752TQ XXXXX Tape and Reel, 4000 NOTE: XXXXX = Date Code and Vendor Code. Green (RoHS & HSF): defines "Green" to mean Pb-Free (RoHS compatible) and free of halogen substances. If you have additional comments or questions, please contact your SGMICRO representative directly. BSOLUTE MXIMUM RTINGS to V to 6V Voltage into ny Terminal (1) V to ( + 0.3V) Continuous Current into ny Terminal... ±20m Peak Current, X_, Y_ (Pulsed at 1ms, 10% duty cycle)... ±40m Junction Temperature Storage Temperature Range to +150 Lead Temperature (Soldering, 10s) ESD Susceptibility HBM MM NOTE: 1. Voltages exceeding or on any signal terminal are clamped by internal diodes. Limit forward-diode current to maximum current rating. RECOMMENDED OPERTING CONDITIONS Supply Voltage Range V to 5.5V Operating Temperature Range to +85 OVERSTRESS CUTION Stresses beyond those listed may cause permanent damage to the device. Functional operation of the device at these or any other conditions beyond those indicated in the operational section of the specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability. ESD SENSITIVITY CUTION This integrated circuit can be damaged by ESD if you don t pay attention to ESD protection. SGMICRO recommends that all integrated circuits be handled with appropriate precautions. Failure to observe proper handling and installation procedures can cause damage. ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more susceptible to damage because very small parametric changes could cause the device not to meet its published specifications. DISCLIMER reserves the right to make any change in circuit design, specification or other related things if necessary without notice at any time. 2
3 CMOS nalog Multiplexer PIN CONFIGURTIONS (TOP VIEW) (TOP VIEW) Y Y2 Y0 X2 Y X Y 3 14 X1 Y 1 12 X1 Y3 Y X X0 Y3 Y X X0 ENBLE NC LOGIC X3 B ENBLE 4 EP NC B 9 X3 SOIC-16/SSOP-16/TSSOP-16 TQFN L PIN DESCRIPTION PIN SOIC-16/SSOP-16/TSSOP-16 TQFN L NME FUNCTION 1, 5, 2, 4 15, 3, 16, 2 Y0, Y1, Y2, Y3 nalog Switch Y Inputs Y nalog Switch Y Output. 6 4 ENBLE Digital Enable Input. Normally connected to. 7 5 NC No Connect. 8 6 Ground. Connect to digital ground. 9 7 B Digital ddress B Input Digital ddress Input. 12, 14, 15, 11 10, 12, 13, 9 X0, X1, X2, X3 nalog Switch X Inputs X nalog Switch X Output Positive nalog and Digital Supply Voltage Input. Exposed Pad EP Exposed Pad. Connect EP to. FUNCTION TBLE X = Don t care ENBLE SELECT INPUTS INPUT B ON SWITCHES H X X ll Switches Open L L L X-X0, Y-Y0 L L H X-X1, Y-Y1 L H L X-X2, Y-Y2 L H H X-X3, Y-Y3 NOTE: Input and output pins are identical and interchangeable. Either may be considered an input or output; signals pass equally well in either direction. 3
4 ELECTRICL CHRCTERISTICS ( = 5., Full = -40 to +85, typical values are at T = +25, unless otherwise noted.) CMOS nalog Multiplexer PRMETER SYMBOL CONDITIONS TEMP MIN TYP MX UNITS NLOG SWITCH nalog Signal Range V X_, V Y_, V X, V Y On-Resistance R ON = 5., I X, I Y = 1m On-Resistance Match Between Channels R ON = 5., I X, I Y = 1m On-Resistance Flatness R FLT(ON) = 5., I X = 1m Full V Full Full Full 28 X_, Y_ Off Leakage Current I X_(OFF), I Y_(OFF) = 5., V X_, V Y_ = 1V, 4.5V, V X, V Y = 4.5V, 1V n X, Y Off Leakage Current I X(OFF), I Y(OFF) = 5., V X_, V Y_ = 1V, 4.5V, V X, V Y = 4.5V, 1V n X, Y On Leakage Current I X(ON), I Y(ON) = 5., V X, V Y = 4.5V, 1V n DIGITL I/O Logic Input Logic Threshold High Logic Input Logic Threshold Low Input-Current High Input-Current Low DYNMIC CHRCTERISTICS ddress Transition Time V H, V BH, V ENBLE V V L, V BL, V ENBLE V I H, I BH, I ENBLE V, V B, V ENBLE = n I L, I BL, I ENBLE V, V B, V ENBLE = n t TRNS V X_, V Y_ = 3V/, R L = 300Ω, C L = 35pF, Test Circuit ns ENBLE Turn-On Time t ON V X_, V Y_ = 3V, R L = 300Ω, C L = 35pF, Test Circuit ns ENBLE Turn-Off Time t OFF V X_, V Y_ = 3V, R L = 300Ω, C L = 35pF, Test Circuit ns Internal, B Rise Time t R ns Internal, B Fall Time t F ns Break-Before-Make Time t D V X_, V Y_ = 3V, R L = 300Ω, C L = 35pF, Test Circuit ns Charge Injection Q R S = 0Ω, C L = 1nF, Test Circuit pc Off Isolation O ISO R L =, f = 1MHz, Test Circuit db Crosstalk X TLK f = 1MHz, Test Circuit db Input Off-Capacitance Output Off-Capacitance C X_(OFF), C Y_(OFF) f = 1MHz, Test Circuit pf C X(OFF), C Y(OFF) f = 1MHz, Test Circuit pf Output On-Capacitance C X(ON), C Y(ON) f = 1MHz, Test Circuit pf -3dB Bandwidth BW R L = MHz Total Harmonic Distortion THD R L = 600Ω, 5V P-P, f = 20Hz to 20kHz % POWER SUPPLY Power Supply Range Full V Power Supply Current I CC = 5.5V, V, V B, V ENBLE = or μ Ω Ω Ω 4
5 ELECTRICL CHRCTERISTICS ( = 3.3V, Full = -40 to +85, typical values are at T = +25, unless otherwise noted.) CMOS nalog Multiplexer PRMETER SYMBOL CONDITIONS TEMP MIN TYP MX UNITS NLOG SWITCH nalog Signal Range V X_, V Y_, V X, V Y On-Resistance R ON I X, I Y = 1m X_, Y_ Off Leakage Current I X_(OFF), I Y_(OFF) Full V Full 116 V X_, V Y_ = 1V, 3V, V X, V Y = 3V, 1V n X, Y Off Leakage Current I X(OFF), I Y(OFF) V X_, V Y_ = 1V, 3V, V X, V Y = 3V, 1V n X, Y On Leakage Current I X(ON), I Y(ON) V X, V Y = 3V, 1V n DIGITL I/O Logic Input Logic Threshold High Logic Input Logic Threshold Low Input-Current High Input-Current Low DYNMIC CHRCTERISTICS ddress Transition Time V H, V BH, V ENBLE V L, V BL, V ENBLE V V I H, I BH, I ENBLE V, V B, V ENBLE = n I L, I BL, I ENBLE V, V B, V ENBLE = n t TRNS V X_, V Y_ = 3V/, R L = 300Ω, C L = 35pF, Test Circuit ns ENBLE Turn-On Time t ON V X_, V Y_ = 3V, R L = 300Ω, C L = 35pF, Test Circuit ns ENBLE Turn-Off Time t OFF V X_, V Y_ = 3V, R L = 300Ω, C L = 35pF, Test Circuit ns Internal, B Rise Time t R ns Internal, B Fall Time t F ns Break-Before-Make Time t D V X_, V Y_ = 3V, R L = 300Ω, C L = 35pF, Test Circuit ns -3dB Bandwidth BW R L = MHz Charge Injection Q R S = 0Ω, C = 1nF, V S = 2.5V, Test Circuit pc POWER SUPPLY Power Supply Current I CC = 3.6V, V, V B, V ENBLE = or μ Ω 5
6 CMOS nalog Multiplexer TYPICL PERFORMNCE CHRCTERISTICS = 5., unless otherwise noted. 70 On Resistance vs. Input Voltage 0 Off Isolation vs. Frequency On Resistance (Ω) T = +85 T = -40 T = +25 Off Isolation (db) Input Voltage (V) Frequency (MHz) 6
7 TEST CIRCUITS CMOS nalog Multiplexer V,V B B X1,X2,Y1,Y2 X0,Y0 X3,Y3 3V V,V B 50% V X0,V Y0 90% 50% 90% ENBLE X,Y 300Ω 35pF t TRNS t TRNS Test Circuit 1. ddress Transition Times (t TRNS) V ENBLE B ENBLE X0,Y0 X1-X3,Y1-Y3 X,Y 300Ω 3V 35pF V ENBLE V X0,V Y0 50% 90% 50% 90% t OFF t ON Test Circuit 2. Switching Times (t ON, t OFF) V,V B B X_, Y_ 3V V,V B 50% V X,V Y 80% t R<20ns t F<20ns ENBLE X,Y 300Ω 35pF t D Test Circuit 3. Break-Before-Make Time (t D) 7
8 TEST CIRCUITS CMOS nalog Multiplexer CHNNEL SELECT { V X_, Y_ CC B V ENBLE V ENBLE ENBLE X,Y C L=1nF Δ ΔVOUT IS THE MESURED VOLTGE DUE TO CHRGE TRNSFER ERROR Q WHEN THE CHNNEL TURNS OFF. Q = ΔVOUT CL Test Circuit 4. Charge Injection (Q) CHNNEL SELECT { B 10nF X_,Y_ V IN NETWORK NLYZER OFF-ISOLTION = 20log (/V IN) ON-LOSS = 20log (/V IN) ENBLE X,Y MES. REF. CROSSTLK = 20log (/V IN) MESUREMENTS RE STNDRDIZED GINST SHORT T SOCKET TERMINLS. OFF-ISOLTION IS MESURED BETWEEN COM ND "OFF" NO TERMINL ON ECH SWITCH. ON-LOSS IS MESURED BETWEEN COM ND "ON" NO TERMINL ON ECH SWITCH. CROSSTLK IS MESURED FROM ONE CHNNEL (, B) TO LL OTHER CHNNELS. SIGNL DIRECTION THROUGH SWITCH IS REVERSED; WORST VLUES RE RECORDED. Test Circuit 5. Off Isolation, On Loss and Crosstalk CHNNEL { SELECT B X_,Y_ ENBLE X,Y 1MHz CPCITNCE NLYZER Test Circuit 6. Capacitance 8
9 PPLICTION INFORMTION Power-Supply Considerations Overview The construction is typical of most CMOS analog switch. It supports single power supply. and are used to drive the internal CMOS switches and set the limits of the analog voltage on any switch. Reverse ESD protection diodes are internally connected between each analog-signal pin and both and. If any analog signal exceeds or, one of these diodes will conduct. During normal operation, these and other reverse-biased ESD diodes leak, forming the only current drawn from or. Virtually all the analog leakage current comes from the ESD diodes. lthough the ESD diodes on a given signal pin are identical and therefore fairly well balanced, they are reverse biased differently. Each is biased by either or and the analog signal. This means their leakages will vary as the signal varies. The difference in the two diode leakages to the and pins constitutes the analog-signal-path leakage current. ll analog leakage current flows between each pin and one of the supply terminals, not to the other switch terminal. This is why both sides of a given switch can show leakage currents of either the same or opposite polarity. CMOS nalog Multiplexer VCC 100Ω 0.01μF VCC * * X,Y X_,Y_ * * *INTERNL PROTECTION DIODES Figure 1. Over-Voltage Protection Using External Resistor Over-Voltage Protection Proper power-supply sequencing is recommended for the CMOS device. Do not exceed the absolute maximum ratings because stresses beyond the listed ratings can cause permanent damage to the devices. lways sequence on first, followed by the logic inputs and analog signals. If power-supply sequencing is not possible, add one 100Ω resistor in series with the supply pin for over-voltage protection (Figure 1). 9
10 PCKGE INFORMTION PCKGE OUTLINE DIMENSIONS TSSOP-16 D E1 E e b RECOMMENDED LND PTTERN (Unit: mm) L 1 2 θ H c In Millimeters In Inches Symbol MIN MX MIN MX b c D E E e BSC BSC L H 0.25 TYP 0.01 TYP θ TX
11 PCKGE INFORMTION PCKGE OUTLINE DIMENSIONS SSOP-16 D E1 E b e RECOMMENDED LND PTTERN (Unit: mm) L 1 2 θ c In Millimeters In Inches Symbol MIN MX MIN MX b c D E E e BSC BSC L θ TX
12 PCKGE INFORMTION PCKGE OUTLINE DIMENSIONS SOIC-16 D e 1.75 E1 E RECOMMENDED LND PTTERN (Unit: mm) L b 1 2 θ c In Millimeters In Inches Symbol MIN MX MIN MX b c D E E e 1.27 BSC BSC L θ TX
13 PCKGE INFORMTION PCKGE OUTLINE DIMENSIONS TQFN L D e N16 L D1 N1 E E1 k b N5 TOP VIEW BOTTOM VIEW SIDE VIEW RECOMMENDED LND PTTERN (Unit: mm) In Millimeters In Inches Symbol MIN MX MIN MX REF REF D D E E k MIN MIN b e TYP TYP L TX
14 PCKGE INFORMTION TPE ND REEL INFORMTION REEL DIMENSIONS TPE DIMENSIONS P2 P0 W Q1 Q2 Q1 Q2 Q1 Q2 B0 Q3 Q4 Q3 Q4 Q3 Q4 Reel Diameter P1 0 K0 Reel Width (W1) DIRECTION OF FEED NOTE: The picture is only for reference. Please make the object as the standard. KEY PRMETER LIST OF TPE ND REEL Package Type Reel Diameter Reel Width W1 0 B0 K0 P0 P1 P2 W Pin1 Quadrant SOIC Q1 SSOP Q1 TSSOP Q1 TQFN L Q1 DD0001 TX
15 PCKGE INFORMTION CRTON BOX DIMENSIONS NOTE: The picture is only for reference. Please make the object as the standard. KEY PRMETER LIST OF CRTON BOX Reel Type Length Width Height Pizza/Carton DD0002 TX
SGM :1 CMOS Analog Signal Multiplexer
8:1 CMOS nalog Signal Multiplexer GENERL DESCRIPTION The is a CMOS analog IC configured as an 8-channel multiplexer. This CMOS device can operate from 2.5V to 5.5V single supplies. Each switch can handle
More informationSGM48753 CMOS Analog Switch
GENERAL DESCRIPTION The is a CMOS analog IC configured as three single-pole/double-throw (SPDT) switches. This CMOS device can operate from 2.5V to 5.5V single supplies. Each switch can handle rail-to-rail
More informationSGM Ω, High Speed, Low Voltage Analog Switch/Multiplexer
.5Ω, High Speed, Low Voltage nalog Switch/Multiplexer GENERL DESCRIPTION The SGM4782 is high-speed, low-voltage, low on-resistance, CMOS analog multiplexer/switch that configured as two 4-channel multiplexers.
More informationSGM Ω, High Speed, Low Voltage Analog Switch/Multiplexer
nalog Switch/Multiplexer GENERL DESCRIPTION The SGM84782 is high-speed, low-voltage, low on-resistance, CMOS analog multiplexer/switch that configured as two 4-channel multiplexers. It operates from a
More informationSGM Ω, High Speed, Low Voltage Analog Switch/Multiplexer
GENERL DESCRIPTION The SGM84782 is high-speed, low-voltage, low on-resistance, CMOS analog multiplexer/switch that configured as two 4-channel multiplexers. It operates from a single +1.8V to +4.2V power
More informationSGM7SZ08 Small Logic Two-Input AND Gate
GENERL DESCRIPTION The is a single two-input ND gate from SGMICRO s Small Logic series. The device is fabricated with advanced CMOS technology to achieve ultra-high speed with high output drive while maintaining
More informationSGM7SZ32 Small Logic Two-Input OR Gate
Preliminary Datasheet GENERL DESCRIPTION The is a single two-input OR gate from SGMICRO's Small Logic series. The device is fabricated with advanced CMOS technology to achieve ultra-high speed with high
More informationSGM48000/1/2 High Speed, Dual Power MOSFET Drivers
SGM000// GENERAL DESCRIPTION The SGM000// ICs are matched dual-drivers. Unique circuit design provides very high speed drivers capable of delivering peak currents of A into highly capacitive loads. Improved
More informationSGM nA, Single Rail-to-Rail I/O Operational Amplifier
GENERAL DESCRIPTION The SGM8041 is guaranteed to operate with a single supply voltage as low as 1.4V, while drawing less than 710nA (TYP) of quiescent current. This device is also designed to support rail-to-rail
More informationSGM nA, Dual Rail-to-Rail I/O Operational Amplifier
SGM842 67nA, Dual Rail-to-Rail I/O GENERAL DESCRIPTION The SGM842 is guaranteed to operate with a single supply voltage as low as 1.4V, while drawing less than 67nA (TYP) of quiescent current per amplifier.
More informationLOW HIGH OFF ON. Maxim Integrated Products 1
9-79; Rev ; /07 Low-Voltage, Quad, SPST General Description The MAX0/MAX/MAX are quad, low-voltage, single-pole/single-throw (SPST) analog switches. On-resistance (00Ω, max) is matched between switches
More informationSGM802 Low-Power, SC70/SOT µp Reset Circuit with Capacitor-Adjustable Reset Timeout Delay
Low-Power, SC70/SOT µp Reset Circuit with GENERAL DESCRIPTION The low-power micro-processor supervisor circuit monitors system voltages from 1.6V to 5V. This device performs a single function: it asserts
More informationSGM7227 High Speed USB 2.0 (480Mbps) DPDT Analog Switch
GENERAL DECRIPTION The GM7227 is a high-speed, low-power double-pole/ double-throw (DPDT) analog switch that operates from a single 1.8V to 4.3V power supply. GM7227 is designed for the switching of high-speed
More informationSGM nA, Non-Unity Gain, Dual Rail-to-Rail Input/Output Operational Amplifier
PRODUCT DESCRIPTION The SGM8046 operates with a single supply voltage as low as 1.4V, while drawing less than 670nA (TYP) of quiescent current per amplifier. This device is also designed to support rail-to-rail
More informationSGM nA, Non-Unity Gain, Quad Rail-to-Rail Input/Output Operational Amplifier
PRODUCT DESCRIPTION The SGM8048 operates with a single supply voltage as low as 1.4V, while drawing less than 690nA (TYP) of quiescent current per amplifier. This device is also designed to support rail-to-rail
More informationSGM7SZ00 Small Logic Two-Input NAND Gate
GENERAL DESCRIPTION The SGM7SZ00 is a single two-input NAND gate from SGMICRO s Small Logic series. The device is fabricated with advanced CMOS technology to achieve ultra-high speed with high output drive
More informationSGM800 Low-Power, SOT µp Reset Circuit with Capacitor-Adjustable Reset Timeout Delay
GENERAL DESCRIPTION The low-power micro-processor supervisor circuit monitors system voltages from 1.6V to 5V. This device performs a single function: it asserts a reset signal whenever the V CC supply
More informationCOM COM GND MAX4644 OFF OFF
9-7; Rev ; / High-Speed, Low-Voltage, 4, General Description The is a single-pole/double-throw (SPDT) switch that operates from a single supply ranging from +.V to +.V. It provides low 4 on-resistance
More informationMAX4638/MAX Ω, Single 8:1 and Dual 4:1, Low-Voltage Analog Multiplexers
General Description The / are single : and dual : CMOS analog multiplexers/demultiplexers (muxes/ demuxes). Each mux operates from a single +.V to +V supply or dual ±.V supplies. These devices feature.ω
More information2Ω, Quad, SPST, CMOS Analog Switches
9-73; Rev ; 4/ 2Ω, Quad, SPST, CMOS Analog Switches General Description The // quad analog switches feature.6ω max on-resistance (R ) when operating from a dual ±5V supply. R is matched between channels
More informationAOZ6135 High Performance, Low R ON, 1Ω SPDT Analog Switch
OZ6135 High Performance, Low R ON, 1Ω PDT nalog witch General Description The OZ6135 is a high performance single-pole double-throw (PDT), low power, TTL-compatible bus switch. The OZ6135 can handle analog
More informationSGM8707 Micro-Power, CMOS Input, RRIO, 1.4V, Push-Pull Output Comparator
GENERAL DESCRIPTION The is an ultra low power comparator with a typical power supply current of 3nA. It has the best-in-class power supply current versus propagation delay performance. The propagation
More informationDATASHEET HI-390. Features. Ordering Information. Pinout Switch States shown for a Logic 1 Input. Applications. Functional Diagram
HI-39 Dual SPDT CMOS nalog Switch NOT RECOMMENDED FOR NEW DESIGNS NO RECOMMENDED REPLCEMENT contact our Technical Support Center at 1-888-INTERSIL or www.intersil.com/tsc DTSHEET FN7 Rev 1. ugust The Hl-39
More informationAOZ Ω Low-Voltage Dual SPDT Analog Switch. General Description. Features. Applications AOZ6236
0.35 Ω Low-Voltage Dual PDT nalog witch General Description The OZ6236 is a 0.35 Ω low-voltage Dual ingle Pole Double Throw (PDT) analog switch. The OZ6236 operates from a single 1.65 V to 4.3 V supply.
More informationAOZ6115 High Performance, Low R ON, SPST Analog Switch
OZ6115 High Performance, Low R ON, PT nalog witch General Description The OZ6115 is a high performance single-pole single-throw (PT), low power, TTL-compatible bus switch. The OZ6115 can handle analog
More informationImproved, SPST/SPDT Analog Switches
9-0; Rev 2; 2/96 Improved, PT/PT nalog witches General escription Maxim s redesigned G7/G/G9 precision, CMO, monolithic analog switches now feature guaranteed on-resistance matching (3Ω max) between switches
More informationPowered-off Protection, 1, 1.8 V to 5.5 V, SPDT Analog Switch (2:1 Multiplexer)
DGE Powered-off Protection,,.8 V to 5.5 V, SPDT Analog Switch (: Multiplexer) DESCRIPTION The DGE is a high performance single-pole, double-throw (SPDT) analog switch designed for.8 V to 5.5 V operation
More informationAOZ Ω Low-Voltage Dual-DPDT Analog Switch
0.3Ω Low-Voltage Dual-DPDT nalog witch General Description The OZ6274 is a dual Double-Pole, Double-Throw (DPDT) analog switch that is designed to operate from a single 1.65V to 4.3V supply. The OZ6274
More informationonlinecomponents.com
a FEATURES +.8 V to +. ingle Supply 2. V ual Supply 2. ON Resistance. ON Resistance Flatness pa Leakage Currents 4 ns Switching Times Single 6-to- Multiplexer AG76 ifferential 8-to- Multiplexer AG77 28-Lead
More information1 pc Charge Injection, 100 pa Leakage CMOS 5 V/5 V/3 V 4-Channel Multiplexer ADG604
a FEATURES 1 pc Charge Injection (Over the Full Signal Range) 2.7 V to 5.5 V ual Supply 2.7 V to 5.5 ingle Supply Automotive Temperature Range: 4 C to +125 C 1 pa Max @ 25 C Leakage Currents 85 Typ On
More informationCMOS, +1.8 V to +5.5 V/ 2.5 V, 2.5 Low-Voltage, 8-/16-Channel Multiplexers ADG706/ADG707 REV. A
a FEATURES +.8 V to +. ingle Supply. V ual Supply. ON Resistance. ON Resistance Flatness pa Leakage Currents ns Switching Times Single -to- Multiplexer AG ifferential 8-to- Multiplexer AG 8-Lead TSSOP
More informationFeatures. Functional Diagrams, Pin Configurations, and Truth Tables
Features Low On-Resistance (Ω typ) Minimizes Distortion and Error Voltages Low Glitching Reduces Step Errors in Sample-and-Holds. Charge Injection, pc typ Single-Supply Operation (+.V to +1V) Improved
More informationUNISONIC TECHNOLOGIES CO., LTD R070LD10
UNISONIC TECHNOLOGIES CO., LTD VOLTGE REGULTOR DESCRIPTION s the UTC linear integrated LDO, the UTC shows a high current, high accuracy, low-dropout voltage which built in on/off function. The features
More informationDescription. For Fairchild s definition of Eco Status, please visit:
FSA2357 Low R ON 3:1 Analog Switch Features 10µA Maximum I CCT Current Over an Expanded Control Voltage Range: V IN=2.6V, V CC=4.5V On Capacitance (C ON): 70pF Typical 0.55Ω Typical On Resistance (R ON)
More informationHigh-Speed, Low-Voltage, CMOS Analog Multiplexers/Switches
9-52; Rev ; 7/99 igh-speed, ow-voltage, CMOS nalog General Description The are high-speed, lowvoltage, CMOS analog ICs configured as an 8-channel multiplexer (M467), two 4-channel multiplexers (M468),
More informationMAX4636EUB -40 C to +85 C 10 µmax 1 NO1 IN1 GND. 3 x 3 THIN QFN OFF ON ON OFF SWITCHES SHOWN FOR "0" INPUT. Maxim Integrated Products 1
9-79; Rev ; /3 Fast, Low-Voltage, Dual 4 SPDT General Description The are fast, dual 4 singlepole/double-throw (SPDT) analog switches that operate with supply voltages from +.8V to +.V. High switching
More informationPowered-off Protection, 6, 1.8 V to 5.5 V, SPDT Analog Switch (2:1 Multiplexer)
Powered-off Protection,, 1. V to 5.5 V, SPDT Analog Switch (:1 Multiplexer) DESCRIPTION The is a high performance single-pole, double-throw (SPDT) analog switch designed for 1. V to 5.5 V operation with
More informationLC2 MOS 4-/8-Channel High Performance Analog Multiplexers ADG408/ADG409
a FEATURES 44 upply Maximum Ratings to Analog Signal Range Low On Resistance ( max) Low Power (I SUPPLY < 75 A) Fast Switching Break-Before-Make Switching Action Plug-in Replacement for G408/G409 APPLICATIONS
More information35Ω, Low-Voltage, SPST/SPDT Analog Switches in UCSP Package
19-1994; Rev 3; 2/3 35, Low-Voltage, SPST/SPDT General Description The low on-resistance (R ON ), low-voltage analog switches operate from a single +2.V to +5.5V supply. The / are single-pole/single-throw
More informationMAX14753 V DD INA0 INA1 INA2 INA3 OUT INB0 INB1 INB2 INB3
19-4255; Rev 3; 7/10 8-Channel/Dual 4-Channel General Description The are 8-to-1 and dual 4-to-1 high-voltage analog multiplexers. Both devices feature 60Ω (typ) on-resistance with 0.03Ω (typ) on-resistance
More informationLow-Leakage, CMOS Analog Multiplexers
/ General Description The / are monolithic, CMOS analog multiplexers (muxes). The 8-channel is designed to connect one of eight inputs to a common output by control of a 3-bit binary address. The dual,
More informationPrecision, 8-Channel/Dual 4-Channel, High-Performance, CMOS Analog Multiplexers
9-027; Rev 2; 8/02 Precision, 8-Channel/Dual 4-Channel, General Description The / precision, monolithic, CMOS analog multiplexers (muxes) offer low on-resistance (less than 0Ω), which is matched to within
More informationPrecision, 16-Channel/Dual 8-Channel, Low-Voltage, CMOS Analog Multiplexers
/ Precision, 6-Channel/Dual 8-Channel, General Description The / low-voltage, CMOS analog multiplexers (muxes) offer low on-resistance (Ω max), which is matched to within 6Ω between switches and remains
More informationPS381/PS383/PS385. Precision, 17V Analog Switches. Features. Applications. Functional Diagrams, Pin Configurations, and Truth Tables
79797979797979797979797979 Features Low On-Resistance (Ω typ) Minimizes Distortion and Error Voltages Low Glitching Reduces Step Errors in Sample-and-Holds. Charge Injection, pc typ Single Supply (+V to
More informationDLA LAND AND MARITIME COLUMBUS, OHIO TITLE MICROCIRCUIT, LINEAR, CMOS SPDT SWITCH, MONOLITHIC SILICON REVISIONS
REVISIONS LTR DESCRIPTION DTE PPROVED Prepared in accordance with SME Y14.24 Vendor item drawing REV PGE REV PGE REV STTUS OF PGES REV PGE 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 PMIC N/ PREPRED BY RICK OFFICER
More information10Ω, Quad, SPST, CMOS Analog Switches
-; Rev ; / Ω, Quad, SPST, MOS nalog Switches General Description Maxim s MX/MX/MX analog switches feature low on-resistance (Ω max) and.ω on-resistance matching between channels. These switches conduct
More informationDPDT CMOS Analog Switch
DPDT CMOS nalog Switch HI-5046/883 This CMOS analog switch offers low-resistance switching performance for analog voltages up to the supply rails and for signal currents up to 70m. ON resistance is low
More informationCMOS ±5 V/+5 V/+3 V Triple SPDT Switch ADG633
CMOS ±5 V/+5 V/+3 V Triple SPT Switch AG633 FEATURES ±2 V to ±6 V ual Supply 2 V to 12 ingle Supply Automotive Temperature Range 4 o C to +125 o C
More informationLow-Voltage Single SPDT Analog Switch
Low-Voltage Single SPDT Analog Switch DG22 DESCRIPTION The DG22 is a single-pole/double-throw monolithic CMOS analog switch designed for high performance switching of analog signals. Combining low power,
More informationQUICK REFERENCE DATA GND = 0 V; T amb =25 C; t r =t f = 6 ns. TYPICAL SYMBOL PARAMETER CONDITIONS 74HC00 74HCT00 UNIT
FETURES Complies with JEDEC standard no. 8-1 ESD protection: HBM EI/JESD22-114- exceeds 2000 V MM EI/JESD22-115- exceeds 200 V Specified from 40 to +85 C and 40 to +125 C. DESCRIPTION The 74HC00/74HCT00
More informationQUICK REFERENCE DATA GND = 0 V; T amb =25 C; t r =t f = 6 ns. TYPICAL SYMBOL PARAMETER CONDITIONS 74HC00 74HCT00 UNIT
Quad 2-input NND gate FETURES Complies with JEDEC standard no. -1 ESD protection: HBM EI/JESD22-114- exceeds 2000 V MM EI/JESD22-115- exceeds 200 V Specified from 40 to +5 C and 40 to +125 C. DESCRIPTION
More informationImproved Quad CMOS Analog Switches
Improved Quad CMOS Analog Switches DG211B, DG212B DESCRIPTION The DG211B, DG212B analog switches are highly improved versions of the industry-standard DG211, DG212. These devices are fabricated in proprietary
More information8-Ch/Dual 4-Ch High-Performance CMOS Analog Multiplexers
8-Ch/ual 4-Ch High-Performance CMOS Analog Multiplexers Low On-Resistance r S(on) : Low Charge Injection Q: pc Fast Transition Time t TRANS : 6 ns Low Power I SUPPLY : A Single Supply Capability 44-V Supply
More informationBCT4223 Low-Voltage, 0.4Ω Dual-SPDT Analog Switch
BCT4223 General Description The BCT4223 is a high-performance, dual single-pole double-throw (SPDT) analog switch. Specified over a wide operating power supply voltage range, 1.65V to 5.0V, Targeted applications
More information2-Line Low Capacitance, Bidirectional and Symmetrical (BiSy) ESD-Protection Diode - Flow Through Design
VBUS5M2-HT1 2-Line Low Capacitance, Bidirectional and Symmetrical (BiSy) ESD-Protection Diode - Flow Through Design 1 22814 3 MRKING (example only) Bar = cathode marking X = date code Y = type code (see
More informationMAX14760/MAX14762/MAX14764 Above- and Below-the-Rails Low-Leakage Analog Switches
19-652; Rev ; 9/11 EVALUATION KIT AVAILABLE MAX1476// General Description The MAX1476// analog switches are capable of passing bipolar signals that are beyond their supply rails. These devices operate
More information3.5Ω (max) at +3V PART. MAX4733EUA -40 C to +85 C 8 µmax MAX4732. Pin Configurations/Functional Diagrams/Truth Tables TOP VIEW (BUMPS ON BOTTOM) NC1
9-264; Rev 2 2/6 Ω, Dual SPST Analog Switches in UCSP General Description The MAX473// low-voltage, dual, single-pole/single-throw (SPST) analog switches operate from a single +2V to +V supply and handle
More informationHigh-Speed, Low-Voltage, CMOS Analog Multiplexers/Switches
9-52; Rev 2; 3/2 General Description The are high-speed, lowvoltage, CMOS analog ICs configured as an 8-channel multiplexer (M467), two 4-channel multiplexers (), and three single-pole/double-throw (SPDT)
More informationDG211. Features. SPST 4-Channel Analog Switch. Part Number Information. Functional Block Diagrams. Pinout. Data Sheet December 21, 2005 FN3118.
Data Sheet FN3118.4 SPST 4-Channel Analog Switch The is a low cost, CMOS monolithic, Quad SPST analog switch. It can be used in general purpose switching applications for communications, instrumentation,
More information74HC4053; 74HCT4053. Triple 2-channel analog multiplexer/demultiplexer
Product data sheet 1. General description 2. Features The is a high-speed Si-gate CMOS device and is pin compatible with the HEF4053B. It is specified in compliance with JEDEC standard no. 7A. The is triple
More informationFSUSB31 Low-Power 1-Port Hi-Speed USB 2.0 (480Mbps) Switch
Low-Power 1-Port Hi-Speed USB 2.0 (480Mbps) Switch Features Low On capacitance, 3.7pF (typical) Low On resistance, 6.5Ω (typical) Low power consumption (1µA maximum) 10µA maximum I CCT over and expanded
More informationPrecision 16-Channel/Dual 8-Channel CMOS Analog Multiplexers
G6B, G7B Precision 6-Channel/ual 8-Channel CMOS nalog Multiplexers ESCRIPTION The G6B and G7B are high performance analog multiplexers. Their ultra-low switch charge injection, low channel capacitance,
More informationSmall Signal Schottky Diode FlipKY Gen 2
Small Signal Schottky Diode FlipKY Gen 2 MECHNICL DT Case: CLP0603-2M X FETURES Schottky diode for high-speed switching Very low dimensions: 0.6 mm x 0.3 mm x 0.29 mm 0.2 forward current Low forward voltage
More informationLow-Voltage Single SPDT Analog Switch
Low-Voltage Single SPDT Analog Switch DG22 DESCRIPTION The DG22 is a single-pole/double-throw monolithic CMOS analog switch designed for high performance switching of analog signals. Combining low power,
More informationCase Outline(s). The case outlines shall be designated in Mil-Std-1835 and as follows:
+SCOPE: TTL COMPATIBLE CMOS ANALOG SWITCHES Device Type Generic Number 0 DG300A(x)/883B 02 DG30A(x)/883B 03 DG302A(x)/883B 04 DG303A(x)/883B Case Outline(s). The case outlines shall be designated in Mil-Std-835
More informationFEATURES BENEFITS APPLICATIONS
0.37, Low Capacitance, Dual DPDT / Quad SPDT Analog Switch DESCRIPTION The, is a four-channel single-pole double-throw (SPDT) analog switch with two control inputs. It is also known as a two-channel double-pole
More informationFeatures Y Wide analog input voltage range g6v. Y Low on resistance 50 typ (VCC V EE e4 5V) Y Logic level translation to enable 5V logic with g5v
74VHC4051 8-Channel Analog Multiplexer 74VHC4052 Dual 4-Channel Analog Multiplexer 74VHC4053 Triple 2-Channel Analog Multiplexer General Description These multiplexers are digitally controlled analog switches
More informationVS-HFA08SD60SPbF. HEXFRED Ultrafast Soft Recovery Diode, 8 A. Vishay Semiconductors. FEATURES BENEFITS PRODUCT SUMMARY
HEXFRED Ultrafast Soft Recovery Diode, 8 2, 4 FETURES Ultrafast recovery time Ultrasoft recovery Very low I RRM 3 TO-252 (D-PK) N/C node PRODUCT SUMMRY Package TO-252 (D-PK) I F(V) 8 V R 600 V V F at I
More informationPin Configurations/Functional Diagrams/Truth Tables IN V+ GND SOT23-6* MAX4544 ON OFF OFF ON SWITCHES SHOWN FOR "0" INPUT. Maxim Integrated Products 1
9-; Rev ; / Low-Voltage, Single-Supply General Description The are precision, dual analog switches designed to operate from a single +.7V to +V supply. Low power consumption (µw) makes these parts ideal
More informationINTEGRATED CIRCUITS DATA SHEET. 74HC04; 74HCT04 Hex inverter. Product specification Supersedes data of 1993 Sep Jul 23
INTEGRTED CIRCUITS DT SHEET Supersedes data of 993 Sep 0 2003 Jul 23 FETURES Complies with JEDEC standard no. 8- ESD protection: HBM EI/JESD22-4- exceeds 2000 V MM EI/JESD22-5- exceeds 200 V. Specified
More informationINTEGRATED CIRCUITS DATA SHEET. 74HC00; 74HCT00 Quad 2-input NAND gate. Product specification Supersedes data of 1997 Aug 26.
INTEGRTED CIRCUITS DT SHEET Quad 2-input NND gate Supersedes data of 1997 ug 26 2003 Jun 30 Quad 2-input NND gate FETURES Complies with JEDEC standard no. 8-1 ESD protection: HBM EI/JESD22-114- exceeds
More informationLow-Voltage, 8-Channel/Dual 4-Channel Multiplexers with Latchable Inputs
9-396; Rev. ; 5/95 Low-Voltage, 8-Channel/Dual 4-Channel General Description The are low-voltage, CMOS, -of-8 and dual 4-channel muxes with latchable digital inputs. They feature low-voltage operation
More informationPin Configurations/Functional Diagrams/Truth Tables IN V+ GND SOT23-6* MAX4544 ON OFF OFF ON SWITCHES SHOWN FOR "0" INPUT. Maxim Integrated Products 1
9-; Rev ; / Low-Voltage, Single-Supply General Description The MAX MAX are precision, dual analog switches designed to operate from a single +.V to +V supply. Low power consumption (µw) makes these parts
More informationPART TOP VIEW. Maxim Integrated Products 1
9-96; Rev ; 2/ 45, SPDT Analog Switch in SOT23-8 General Description The is a dual-supply, single-pole/doublethrow (SPDT) analog switch. On-resistance is 45 max and flat (7 max) over the specified signal
More informationLNTA4001NT1G S-LNTA4001NT1G. Small Signal MOSFET 20 V, 238 ma, Single, N-Channel, Gate ESD Protection LESHAN RADIO COMPANY, LTD.
Small Signal MOSFET V, 38 ma, Single, N-Channel, Gate ESD Protection Features Low Gate Charge for Fast Switching Small.6 x.6 mm Footprint ESD Protected Gate Pb-Free Package is Available ESD Protected:V
More informationNC7SB3157 TinyLogic Low Voltage UHS Analog Switch 2-Channel Multiplexer/Demultiplexer (Preliminary)
September 1999 Revised November 1999 TinyLogic Low Voltage UHS Analog Switch 2-Channel Multiplexer/Demultiplexer (Preliminary) General Description The is a high performance, Analog Switch 2- channel CMOS
More informationLow Voltage 2-1 Mux, Level Translator ADG3232
Low Voltage 2-1 Mux, Level Translator ADG3232 FEATURES Operates from 1.65 V to 3.6 V Supply Rails Unidirectional Signal Path, Bidirectional Level Translation Tiny 8-Lead SOT-23 Package Short Circuit Protection
More informationON OFF PART. Pin Configurations/Functional Diagrams/Truth Tables 5 V+ LOGIC
9-88; Rev ; /7 25Ω SPST Analog Switches in SOT23-6 General Description The are dual-supply single-pole/single-throw (SPST) switches. On-resistance is 25Ω max and flat (2Ω max) over the specified signal
More informationMM74HC151 8-Channel Digital Multiplexer
8-Channel Digital Multiplexer General Description The MM74HC151 high speed Digital multiplexer utilizes advanced silicon-gate CMOS technology. Along with the high noise immunity and low power dissipation
More information1 pc Charge Injection, 100 pa Leakage, CMOS 5 V/+5 V/+3 V Quad SPST Switches ADG611/ADG612/ADG613
a FEATURE 1 pc Charge Injection 2.7 V to 5.5 V ual upply +2.7 V to +5.5 V ingle upply Automotive Temperature Range 4 C to +125 C 1 pa Max @ 25 C Leakage Currents 85 On-Resistance Rail-to-Rail witching
More informationRATIOMETRIC, LINEAR HALL-EFFECT SENSORS
UGN3503 HLL EFFECT SENSOR The UGN3503LT, UGN3503U, and UGN3503U Hall-effect sensors accurately track extremely small changes in magnetic flux density changes generally too small to operate Hall-effect
More informationHyperfast Rectifier, 2 x 15 A FRED Pt
Hyperfast Rectifier, 2 x 5 FRED Pt 3L TO-220B PRIMRY CHRCTERISTICS Base common cathode 2 2 Common node cathode node 3 Package 3L TO-220B I F(V) 2 x 5 V R 300 V V F at I F 0.85 V t rr typ. See Recovery
More informationLC 2 MOS Precision Analog Switch in MSOP ADG419-EP
LC 2 MOS Precision Analog Switch in MSOP AG49-EP FEATURES 44 V supply maximum ratings VSS to V analog signal range Low on resistance:
More informationPI4GTL bit bidirectional low voltage translator
Features 2-bit bidirectional translator Less than 1.5 ns maximum propagation delay to accommodate Standard mode and Fast mode I2Cbus devices and multiple masters Allows voltage level translation between
More informationIH5341, IH5352. Dual SPST, Quad SPST CMOS RF/Video Switches. Description. Features. Ordering Information. Applications. Pinouts.
SEMICONDUCTOR IH, IH2 December Features Description Dual SPST, Quad SPST CMOS RF/Video Switches R DS(ON) < Ω Switch Attenuation Varies Less Than db From DC to 00MHz "OFF" Isolation > 0dB Typical at 0MHz
More informationDG2707. High Speed, Low Voltage, 3, Differential 4:1 CMOS Analog Multiplexer/Switch. Vishay Siliconix FEATURES DESCRIPTION APPLICATIONS
G2707 High Speed, Low Voltage, 3, ifferential 4:1 CMOS Analog Multiplexer/Switch ESCRIPTION The G2707 is a high speed, low voltage, 3, differential 4:1 multiplexer. It operates from a 1.65 V to 4.3 V single
More informationPrecision 16-Channel/Dual 8-Channel CMOS Analog Multiplexers
G6B, G7B Precision 6-Channel/ual 8-Channel CMOS nalog Multiplexers ESCRIPTION The G6B and G7B are high performance analog multiplexers. Their ultra-low switch charge injection, low channel capacitance,
More informationDevice Type Generic Number Circuit Function 01 DG406A(x)/883B 16-Channel Analog Multiplexer 02 DG407A(x)/883B Dual 8-Channel Analog Multiplexer
SCOPE: IMPROVED 6-CHANNEL/DUAL 8-CHANNEL, HIGH PERFORMANCE CMOS ANALOG MULTIPLEXER Device Type Generic Number Circuit Function 0 DG406A(x)/883B 6-Channel Analog Multiplexer DG407A(x)/883B Dual 8-Channel
More informationLow Voltage 400 MHz Quad 2:1 Mux with 3 ns Switching Time ADG774A
a FEATURE Bandwidth >4 MHz Low Insertion Loss and On Resistance: 2.2 Typical On-Resistance Flatness.3 Typical ingle 3 V/5 upply Operation Very Low istortion:
More informationPower MOSFET D 2 PAK (TO-263) G D. PARAMETER SYMBOL LIMIT UNIT Drain-Source Voltage V DS 200 Gate-Source Voltage V GS ± 20
Power MOSFET DTW2070 PRODUCT SUMMRY V DS (V) 200 R DS(on) ( ) V GS = 0 V 0.09 Q g (Max.) (nc) 70 Q gs (nc) 3 Q gd (nc) 39 Configuration Single FETURES Halogen-free ccording to IEC 6249-2-2 Definition Surface
More informationPrecision, 16-Channel/Dual 8-Channel, High-Performance, CMOS Analog Multiplexers
9-27; Rev 3; 3/ Precision, 6-Channel/Dual 8-Channel, General Description The MA36/MA37 precision, monolithic, CMOS analog multiplexers (muxes) offer low on-resistance (less than Ω), which is matched to
More information74HC4051; 74HCT channel analog multiplexer/demultiplexer
Product data sheet 1. General description 2. Features 3. Applications The is a high-speed Si-gate CMOS device and is pin compatible with Low-power Schottky TTL (LSTTL). The device is specified in compliance
More information74HC4067; 74HCT channel analog multiplexer/demultiplexer
Product data sheet 1. General description 2. Features 3. Applications The is a high-speed Si-gate CMOS device and is pin compatible with the HEF4067B. The device is specified in compliance with JEDEC standard
More informationEN: This Datasheet is presented by the m anufacturer. Please v isit our website for pricing and availability at ore.hu.
EN: This Datasheet is presented by the m anufacturer. Please v isit our website for pricing and availability at www.hest ore.hu. INTEGRTED CIRCUITS DT SHEET Supersedes data of 1990 Dec 01 2003 Jul 25 FETURES
More informationV N (8) V N (7) V N (6) GND (5)
4-Channel Low Capacitance Dual-Voltage ESD Protection Array Features Three Channels of Low Voltage ESD Protection One Channel of High Voltage ESD Protection Provides ESD Protection to IEC61000 4 2 Level
More informationUNISONIC TECHNOLOGIES CO., LTD U74AHC1G66
UNISIC TECHNOLOGIES CO., LTD BILATERAL SWITCH DESCRIPTI The UTC is an analog switch which transmits signals from pin(y or Z) to pin (Z or Y) with an active HIGH enable input pin (E). When pin E is LOW,
More informationNLAS3158. Low Voltage Dual SPDT Analog Switch Dual 2:1 Multiplexer
Low Voltage Dual PDT nalog witch Dual 2:1 Multiplexer The NL3158 is an advanced CMO analog switch fabricated with silicon gate CMO technology. It achieves very low propagation delay and RD ON resistances
More informationPI5A3158. SOTINY TM Low Voltage Dual SPDT An a log Switch 2:1 Mux/DeMux Bus Switch. Features. Description. Connection Diagram.
PI53158 OINY M Low Voltage Dual PD n a log witch Features CMO echnology for Bus and nalog pplications Low On-Resistance: 8Ω at 3.0V Wide Range: 1.65V to 5.5V Rail-to-Rail ignal Range Control Input Overvoltage
More informationHex inverting Schmitt trigger with 5 V tolerant input
Rev. 04 15 February 2005 Product data sheet 1. General description 2. Features 3. pplications The is a high-performance, low-power, low-voltage, Si-gate CMOS device and superior to most advanced CMOS compatible
More informationT95N02R. Power MOSFET 95 Amps, 24 Volts. N Channel DPAK
NTD95NR Power MOSFET 95 mps, Volts N Channel DPK Features High Power and Current Handling Capability Fast Switching Performance Low R DS(on) to Minimize Conduction Loss Low Gate Charge to Minimize Switching
More information