SGM nA, Non-Unity Gain, Dual Rail-to-Rail Input/Output Operational Amplifier
|
|
- Monica Wilkins
- 5 years ago
- Views:
Transcription
1 PRODUCT DESCRIPTION The SGM8046 operates with a single supply voltage as low as 1.4V, while drawing less than 670nA (TYP) of quiescent current per amplifier. This device is also designed to support rail-to-rail input and output operation. This combination of features supports battery-powered and portable applications. The SGM8046 has a gain-bandwidth product of 100kHz (TYP) and is stable for gains 10. The combination of characteristics makes the SGM8046 ideal for low frequency applications, such as battery current monitoring and sensor conditioning. The SGM8046 operational amplifier is offered in dual configuration and it is specified for the extended industrial (-40 to +85 ) temperature range. The SGM8046 is available in the Green SOIC-8 and MSOP-8 packages. TYPICAL APPLICATION I S FEATURES Low Quiescent Current: 670nA/Amplifier (TYP) Rail-to-Rail Input and Output Gain-Bandwidth Product: 100kHz (TYP) Stable for Gains 10 Wide Supply Voltage Range: 1.4V to 5.5V -40 C to +85 C Operating Temperature Range Available in Green SOIC-8 and MSOP-8 Packages APPLICATIONS Toll Booth Tags Wearable Products Temperature Measurement Battery Powered System PIN CONFIGURATIONS (TOP VIEW) SGM Ω +V S V OUTA 1 8 +V S 1.4V to 5.5V SGM8046 V OUT V INA- 2 7 V OUTB 50kΩ V INA+ 3 6 V INB- I S = 1MΩ +Vs - V OUT (20V/V) (10Ω) High Side Battery Current Sensor -V S 4 SOIC-8/MSOP-8 5 V INB+ REV. A. 2
2 PACKAGE/ORDERING INFORMATION MODEL SGM8046 ORDER NUMBER PACKAGE DESCRIPTION PACKAGE OPTION MARKING INFORMATION SGM8046YS8G/TR SOIC-8 Tape and Reel, 2500 SGM8046YS8 SGM8046YMS8G/TR MSOP-8 Tape and Reel, 3000 SGM8046YMS8 ABSOLUTE MAXIMUM RATINGS Supply Voltage V Analog Inputs (V IN+, V IN ) (-V S) - 0.1V to (+V S) + 0.1V Differential Input Voltage (-V S ) - (+V S ) Storage Temperature Range to +150 Junction Temperature Operating Temperature Range to +85 Lead Temperature (Soldering 10sec) ESD Susceptibility HBM V MM V NOTE: Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. CAUTION This integrated circuit can be damaged by ESD if you don t pay attention to ESD protection. SGMICRO recommends that all integrated circuits be handled with appropriate precautions. Failure to observe proper handling and installation procedures can cause damage. ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more susceptible to damage because very small parametric changes could cause the device not to meet its published specifications. SGMICRO reserves the right to make any change in circuit design, specification or other related things if necessary without notice at any time. Please contact SGMICRO sales office to get the latest datasheet. 2
3 ELECTRICAL CHARACTERISTICS +V S = +1.4V to +5.0V, -V S = GND, T A = +25 C, A V = 10, V CM = +V S/2, V OUT +V S/2 and R L = 1MΩ to +V S/2 (1), unless otherwise noted. PARAMETER CONDITIONS MIN TYP MAX UNITS DC ELECTRICAL CHARACTERISTICS Input Offset Voltage (V OS ) V CM = +V S / mv Input Offset Voltage Drift (ΔV OS /Δ T ) V CM = +V S /2, -40 T A µv/ C Power Supply Rejection Ratio (PSRR) +V S = 1.4V to 5.5V db Input Common Mode Voltage Range (V CMR) -V S V S V Common Mode Rejection Ratio (CMRR) Large Signal Voltage Gain (A VO ) +V S = 5.0V, V CM = -0.1V to 5.1V V S = 5.0V, V CM = 2.5V to 5.1V V S = 5.0V, V CM = -0.1V to 2.5V V S = 1.4V, R L = 50kΩ, V OUT = +V S - 0.1V V S = 2.5V, R L = 50kΩ, V OUT = +V S - 0.1V 86 +V S = 5.0V, R L = 50kΩ, V OUT = +V S - 0.1V Input Bias Current (I B) 1 pa Input Offset Current (I OS ) 1 pa Maximum Output Voltage Swing Short Circuit Current (I SC) V OH V OL +V S = 1.4V, R L = 50kΩ V S = 2.5V, R L = 50kΩ V S = 5.0V, R L = 50kΩ V S = 1.4V, R L = 50kΩ V S = 2.5V, R L = 50kΩ 3.0 +V S = 5.0V, R L = 50kΩ V S = 2.5V 4.8 +V S = 5.0V Supply Voltage V Quiescent Current/Amplifier (I Q ) +V S = 1.4V 560 +V S = 2.5V 620 +V S = 5.0V db db V mv ma na 3
4 ELECTRICAL CHARACTERISTICS +V S = +1.4V to +5.0V, -V S = GND, T A = +25 C, A V = 10, V CM = +V S/2, V OUT +V S/2 and R L = 1MΩ to +V S/2, C L = 60pF (1), unless otherwise noted. PARAMETER CONDITIONS MIN TYP MAX UNITS AC ELECTRICAL CHARACTERISTICS Gain-Bandwidth Product 100 khz Slew Rate (SR) +V S = 1.4V, V OUT = 1V Step V S = 2.5V, V OUT = 1V Step V S = 5.0V, V OUT = 2V Step 14.5 Phase Margin (PM) +V S = 1.4V to 5.5V 60 Input Voltage Noise (e n p-p) Input Voltage Noise Density (e n ) NOTE1: Refer to Figure 1 and Figure 2. +V S = 1.4V, f = 0.1Hz to 10Hz 3.2 +V S = 2.5V, f = 0.1Hz to 10Hz 3.0 +V S = 5.0V, f = 0.1Hz to 10Hz 3.0 +V S = 1.4V, f = 1kHz 190 +V S = 2.5V, f = 1kHz 180 +V S = 5.0V, f = 1kHz 190 V/ms µv P-P nv/ HZ TEST CIRCUITS The test circuits used for the DC and AC tests are shown in Figure 1 and Figure 2. The bypass capacitors are laid out according to the rules discussed in Supply Bypass. +V S 0.1μF 1μF +V S 0.1μF 1μF V IN R N + SGM V OUT +V S /2 R N + SGM V OUT C L R L C L R L +V S /2 R G R F +V S /2 R G V IN +V S /2 R F Figure 1. AC and DC Test Circuit for Most Non-Inverting Gain Conditions. Figure 2. AC and DC Test Circuit for Most Inverting Gain Conditions. 4
5 TYPICAL PERFORMANCE CHARACTERISTICS T A = +25 C, +V S = +1.4V to +5.0V, -V S = GND, A V = 10, V CM = +V S/2, V OUT +V S/2 and R L = 1MΩ to +V S/2, C L = 60pF, unless otherwise noted. Large Signal Inverting Pulse Response Large Signal Non-Inverting Pulse Response V OUT (1V/div) V S = 5.0V R L = 50kΩ C L = 60pF A V = -10 V OUT (1V/div) V S =5.0V R L = 50kΩ C L = 60pF A V = +10 Time (5ms/div) Time (5ms/div) Small Signal Inverting Pulse Response Small Signal Non-Inverting Pulse Response V OUT (200mV/div) R L = 50kΩ C L = 60pF A V = -10 V OUT (200mV/div) R L = 50kΩ C L = 60pF A V = +10 Time (5ms/div) Time (5ms/div) Slew Rate (V/ms) Slew Rate vs. Temperature 35 Low to High 30 High to Low 25 V S = 5.5V V S = 1.4V Input, Output Voltage (V) No Phase Reversal V OUT V IN Time (5ms/div) Temperature ( ) 5
6 TYPICAL PERFORMANCE CHARACTERISTICS T A = +25 C, +V S = +1.4V to +5.0V, -V S = GND, A V = 10, V CM = +V S/2, V OUT +V S/2 and R L = 1MΩ to +V S/2, C L = 60pF, unless otherwise noted. Percentage of Amplifiers (%) Offset Voltage Production Distribution at +5V Samples V CM = +V S /2 Percentage of Amplifiers (%) Offset Voltage Production Distribution at +1.4V Samples V CM = +V S / Offset Voltage (mv) Offset Voltage (mv) 6
7 PACKAGE OUTLINE DIMENSIONS MSOP-8 b E1 E 4.8 e RECOMMENDED LAND PATTERN (Unit: mm) D L A A1 A2 c θ Symbol Dimensions In Millimeters Dimensions In Inches MIN MAX MIN MAX A A A b c D E E e BSC BSC L θ
8 PACKAGE OUTLINE DIMENSIONS SOIC-8 D e E1 E 5.2 b 1.27 RECOMMENDED LAND PATTERN (Unit: mm) L A A1 θ c A2 Dimensions In Millimeters Dimensions In Inches Symbol MIN MAX MIN MAX A A A b c D E E e 1.27 BSC BSC L θ
9 TAPE AND REEL INFORMATION REEL DIMENSIONS TAPE DIMENSIONS P2 P0 W Q1 Q2 Q1 Q2 Q1 Q2 B0 Q3 Q4 Q3 Q4 Q3 Q4 Reel Diameter P1 A0 K0 Reel Width (W1) DIRECTION OF FEED NOTE: The picture is only for reference. Please make the object as the standard. KEY PARAMETER LIST OF TAPE AND REEL Package Type Reel Diameter Reel Width W1 A0 B0 K0 P0 P1 P2 W Pin1 Quadrant SOIC Q1 MSOP Q1 9
10 CARTON BOX DIMENSIONS NOTE: The picture is only for reference. Please make the object as the standard. KEY PARAMETER LIST OF CARTON BOX Reel Type Length Width Height Pizza/Carton
SGM nA, Non-Unity Gain, Quad Rail-to-Rail Input/Output Operational Amplifier
PRODUCT DESCRIPTION The SGM8048 operates with a single supply voltage as low as 1.4V, while drawing less than 690nA (TYP) of quiescent current per amplifier. This device is also designed to support rail-to-rail
More informationSGM nA, Dual Rail-to-Rail I/O Operational Amplifier
SGM842 67nA, Dual Rail-to-Rail I/O GENERAL DESCRIPTION The SGM842 is guaranteed to operate with a single supply voltage as low as 1.4V, while drawing less than 67nA (TYP) of quiescent current per amplifier.
More informationSGM nA, Single Rail-to-Rail I/O Operational Amplifier
GENERAL DESCRIPTION The SGM8041 is guaranteed to operate with a single supply voltage as low as 1.4V, while drawing less than 710nA (TYP) of quiescent current. This device is also designed to support rail-to-rail
More informationSGM8707 Micro-Power, CMOS Input, RRIO, 1.4V, Push-Pull Output Comparator
GENERAL DESCRIPTION The is an ultra low power comparator with a typical power supply current of 3nA. It has the best-in-class power supply current versus propagation delay performance. The propagation
More informationSGM48000/1/2 High Speed, Dual Power MOSFET Drivers
SGM000// GENERAL DESCRIPTION The SGM000// ICs are matched dual-drivers. Unique circuit design provides very high speed drivers capable of delivering peak currents of A into highly capacitive loads. Improved
More informationSGM7SZ00 Small Logic Two-Input NAND Gate
GENERAL DESCRIPTION The SGM7SZ00 is a single two-input NAND gate from SGMICRO s Small Logic series. The device is fabricated with advanced CMOS technology to achieve ultra-high speed with high output drive
More informationSGM802 Low-Power, SC70/SOT µp Reset Circuit with Capacitor-Adjustable Reset Timeout Delay
Low-Power, SC70/SOT µp Reset Circuit with GENERAL DESCRIPTION The low-power micro-processor supervisor circuit monitors system voltages from 1.6V to 5V. This device performs a single function: it asserts
More informationSGM800 Low-Power, SOT µp Reset Circuit with Capacitor-Adjustable Reset Timeout Delay
GENERAL DESCRIPTION The low-power micro-processor supervisor circuit monitors system voltages from 1.6V to 5V. This device performs a single function: it asserts a reset signal whenever the V CC supply
More informationSGM48753 CMOS Analog Switch
GENERAL DESCRIPTION The is a CMOS analog IC configured as three single-pole/double-throw (SPDT) switches. This CMOS device can operate from 2.5V to 5.5V single supplies. Each switch can handle rail-to-rail
More informationSGM7SZ08 Small Logic Two-Input AND Gate
GENERL DESCRIPTION The is a single two-input ND gate from SGMICRO s Small Logic series. The device is fabricated with advanced CMOS technology to achieve ultra-high speed with high output drive while maintaining
More informationSGM7SZ32 Small Logic Two-Input OR Gate
Preliminary Datasheet GENERL DESCRIPTION The is a single two-input OR gate from SGMICRO's Small Logic series. The device is fabricated with advanced CMOS technology to achieve ultra-high speed with high
More informationLow Drift, Low Power Instrumentation Amplifier AD621
a FEATURES EASY TO USE Pin-Strappable Gains of 0 and 00 All Errors Specified for Total System Performance Higher Performance than Discrete In Amp Designs Available in -Lead DIP and SOIC Low Power,.3 ma
More informationSGM7227 High Speed USB 2.0 (480Mbps) DPDT Analog Switch
GENERAL DECRIPTION The GM7227 is a high-speed, low-power double-pole/ double-throw (DPDT) analog switch that operates from a single 1.8V to 4.3V power supply. GM7227 is designed for the switching of high-speed
More informationSGM Ω, High Speed, Low Voltage Analog Switch/Multiplexer
GENERL DESCRIPTION The SGM84782 is high-speed, low-voltage, low on-resistance, CMOS analog multiplexer/switch that configured as two 4-channel multiplexers. It operates from a single +1.8V to +4.2V power
More informationMaxim Integrated Products 1
19-4187; Rev 4; 7/1 μ μ PART AMPS PER PACKAGE PIN- PACKAGE + * TOP MARK MAX965AZK+ 1 5 SOT3 ADSI MAX965AZK/V+ 1 5 SOT3 ADSK MAX965AUA+ 1 8 μmax-ep* AABI MAX965ATA+ 1 8 TDFN-EP* BKX MAX9651AUA+ 8 μmax-ep*
More informationHigh-Supply-Voltage, Precision Voltage Reference in SOT23 MAX6035
19-2606; Rev 3; 11/06 High-Supply-Voltage, Precision General Description The is a high-voltage, precision micropower voltage reference. This three-terminal device is available with output voltage options
More informationSGM :1 CMOS Analog Signal Multiplexer
8:1 CMOS nalog Signal Multiplexer GENERL DESCRIPTION The is a CMOS analog IC configured as an 8-channel multiplexer. This CMOS device can operate from 2.5V to 5.5V single supplies. Each switch can handle
More informationSGM Ω, High Speed, Low Voltage Analog Switch/Multiplexer
.5Ω, High Speed, Low Voltage nalog Switch/Multiplexer GENERL DESCRIPTION The SGM4782 is high-speed, low-voltage, low on-resistance, CMOS analog multiplexer/switch that configured as two 4-channel multiplexers.
More informationRP mA, Ultra-Low Noise, Ultra-Fast CMOS LDO Regulator. General Description. Features. Applications. Ordering Information. Marking Information
RP122 3mA, Ultra-Low Noise, Ultra-Fast CMOS LDO Regulator General Description The RP122 is designed for portable RF and wireless applications with demanding performance and space requirements. The RP122
More informationAME 1.5A CMOS LDO AME8815. n General Description. n Functional Block Diagram. n Features. n Typical Application. n Applications
n General Description n Functional Block Diagram The family of linear regulators feature low quiescent current (45µA typ.) with low dropout voltage, making them ideal for battery applications. It is available
More informationRT9166B. 600mA, Ultra-Fast Transient Response Linear Regulator. General Description. Features. Ordering Information. Applications. Pin Configurations
Ordering Information Output Voltage 12 : 1.2V Note : Richtek products are : RoHS compliant and compatible with the current requirements of IPC/JEDEC J-STD-020. Suitable for use in SnPb or Pb-free soldering
More informationN.C. OUT. Maxim Integrated Products 1
19-2892; Rev 2; 11/6 Ultra-Low-Power Precision Series General Description The MAX629 micropower, low-dropout bandgap voltage reference combines ultra-low supply current and low drift in a miniature 5-pin
More informationSGM Ω, High Speed, Low Voltage Analog Switch/Multiplexer
nalog Switch/Multiplexer GENERL DESCRIPTION The SGM84782 is high-speed, low-voltage, low on-resistance, CMOS analog multiplexer/switch that configured as two 4-channel multiplexers. It operates from a
More informationUltra-Low-Power Precision Series Voltage Reference MAX6029. Features. General Description. Ordering Information. Applications.
MAX629 General Description The MAX629 micropower, low-dropout bandgap voltage reference combines ultra-low supply current and low drift in a miniature 5-pin SOT23 surface-mount package that uses 7% less
More informationAME. High PSRR, Low Noise, 600mA CMOS Regulator AME8855. n General Description. n Typical Application. n Features. n Functional Block Diagram
8855 n General Description n Typical Application The 8855 family of positive, CMOS linear regulators provide low dropout voltage(42mv@6ma), low quiescent current, and low noise CMOS LDO. These rugged devices
More informationAME. High PSRR, Low Noise, 600mA CMOS Regulator AME8855. General Description. Typical Application. Features. Functional Block Diagram.
8855 General Description Typical Application The 8855 family of positive, CMOS linear regulators provide low dropout voltage(42mv@6ma), low quiescent current, and low noise CMOS LDO. These rugged devices
More informationNCS1002A. Constant Voltage / Constant Current Secondary Side Controller
NCS00A Constant Voltage / Constant Current Secondary Side Controller Description The NCS00A is a performance upgrade from the NCS00 focused on reducing power consumption in applications that require more
More informationAME. High PSRR, Low Noise, 300mA CMOS Regulator AME8853. n General Description. n Typical Application. n Features. n Functional Block Diagram
8853 n General Description n Typical Application The 8853 family of positive, CMOS linear regulators provide low dropout voltage(220mv@300ma), low quiescent current, and low noise CMOS LDO. These rugged
More informationGENERAL DESCRIPTION The PT5128 is a dual channel low-dropout voltage regulator designed for portable and wireless applications that require high PSRR, low quiescent current and excellent line and load
More informationUltra-Low-Power Series Voltage Reference
19-257; Rev 2; 3/5 Ultra-Low-Power Series Voltage Reference General Description The micropower, low-dropout bandgap voltage reference combines ultra-low supply current and low drift in a miniature 5-pin
More informationMAX6043 Precision High-Voltage Reference in SOT23
MAX643 General Description The MAX643 precision voltage reference provides accurate preset +, +3.3V, +4.96V, +5.V, and +1V reference voltages from up to +4V input voltages. The MAX643 features a proprietary
More informationSGM48752 CMOS Analog Multiplexer
CMOS nalog Multiplexer GENERL DESCRIPTION The is a CMOS analog IC configured as two 4-channel multiplexers. This CMOS device can operate from 2.5V to 5.5V single supplies. Each switch can handle rail-to-rail
More informationLow Input Voltage, Low-Dropout 200mA Linear Regulator
Low Input Voltage, Low-Dropout 200mA Linear Regulator Description The is a CMOS low dropout, positive linear regulator with input voltage down to about 1.65V. The can deliver a guaranteed 200mA load current
More informationUNISONIC TECHNOLOGIES CO., LTD TDA7269
UNISONIC TECHNOLOGIES CO., LTD TDA7269 14W+14W STEREO AMPLIFIER WITH MUTE & STAND-BY DESCRIPTION The UTC TDA7269 is a stereo 14+14W class AB Dual Audio Power amplifier with mute and ST-BY control. This
More informationTC ma, Tiny CMOS LDO With Shutdown. General Description. Features. Applications. Package Types SOT-23 SC-70
1 ma, Tiny CMOS LDO With Shutdown Features Space-saving -Pin SC-7 and SOT-23 Packages Extremely Low Operating Current for Longer Battery Life: 3 µa (typ.) Very Low Dropout Voltage Rated 1 ma Output Current
More informationSC70, 1.6V, Nanopower, Beyond-the-Rails Comparators With/Without Reference
19-1862; Rev 4; 1/7 SC7, 1.6V, Nanopower, Beyond-the-Rails General Description The nanopower comparators in space-saving SC7 packages feature Beyond-the- Rails inputs and are guaranteed to operate down
More informationTOP VIEW. Maxim Integrated Products 1
9-2266; Rev 2; 6/3 3ppm/ C, Low-Power, Low-Dropout General Description The high-precision, low-power, low-dropout voltage reference features a low 3ppm/ C (max) temperature coefficient and a low dropout
More information3-TERMINAL POSITIVE LINEAR REGULATOR General Description. Features. Applications
General Description The series are three terminal positive regulators with several fixed output voltages. These regulators can provide local on card regulation, eliminating the distribution problems associated
More informationLow Voltage 2-1 Mux, Level Translator ADG3232
Low Voltage 2-1 Mux, Level Translator ADG3232 FEATURES Operates from 1.65 V to 3.6 V Supply Rails Unidirectional Signal Path, Bidirectional Level Translation Tiny 8-Lead SOT-23 Package Short Circuit Protection
More informationKH600. 1GHz, Differential Input/Output Amplifier. Features. Description. Applications. Typical Application
KH 1GHz, Differential Input/Output Amplifier www.cadeka.com Features DC - 1GHz bandwidth Fixed 1dB (V/V) gain 1Ω (differential) inputs and outputs -7/-dBc nd/3rd HD at MHz ma output current 9V pp into
More informationRT9184A. Dual, Ultra-Fast Transient Response, 500mA LDO Regulator. General Description. Features. Pin Configuration. Applications
RT9184A Dual, Ultra-Fast Transient Response, 500mA LDO Regulator General Description The RT9184A series are an efficient, precise dual-channel CMOS LDO regulator optimized for ultra-low-quiescent applications.
More informationPrecision, Micropower, Low-Dropout, High- Output-Current, SO-8 Voltage References
19-165; Rev ; 7/ Precision, Micropower, Low-Dropout, High- General Description The MAX6167 are precision, low-dropout, micropower voltage references. These three-terminal devices operate with an input
More informationRT9166/A. 300/600mA, Ultra-Fast Transient Response LDO Regulator. General Description. Features. Applications. Ordering Information
RT9166/A 3/6mA, Ultra-Fast Transient Response LDO Regulator General Description The RT9166/A series are CMOS low dropout regulators optimized for ultra-fast transient response. The devices are capable
More informationSY10/100EL11V. General Description. Precision Edge. Features. Pin Names. 5V/3.3V 1:2 Differential Fanout Buffer. Revision 10.0
SY10/100EL11 5/3.3 1:2 Differential Fanout Buffer Revision 10.0 General Description The SY10/100EL11 are 1:2 differential fanout gates. These devices are functionally similar to the E111A/L devices, with
More informationPT5108. High-PSRR 500mA LDO GENERAL DESCRIPTION FEATURES APPLICATIONS TYPICAL APPLICATIONS. Ripple Rejection vs Frequency. Ripple Rejection (db)
GENERAL DESCRIPTION The PT5108 is a low-dropout voltage regulator designed for portable applications that require both low noise performance and board space. Its PSRR at 1kHz is better than 70dB. The PT5108
More informationST2L Very low quiescent current dual voltage regulator. Description. Features. Applications
Very low quiescent current dual voltage regulator Description Datasheet - production data Features DFN8 (5x6 mm) V O1 : fixed V O2 : adjustable from 1.25 to V I - V DROP Guaranteed current of output 1:
More informationMAX6033 High-Precision, Low-Dropout SOT23 Series Voltage Reference
MAX633 High-Precision, Low-Dropout SOT23 Series General Description The MAX633 ultra-high-precision series voltage reference features a low 7ppm/ C (max) temperature coefficient and a low dropout voltage
More informationMAX6012/6021/6025/ 6030/6041/6045/6050. Precision, Low-Power, Low-Dropout, SOT23-3 Voltage References. General Description.
General Description The /MAX6021/MAX6025/MAX6030/MAX6041/ MAX6045/ precision, low-dropout, micropower voltage references are available in miniature SOT23-3 surface-mount packages. They feature a proprietary
More informationLOW HIGH OFF ON. Maxim Integrated Products 1
9-79; Rev ; /07 Low-Voltage, Quad, SPST General Description The MAX0/MAX/MAX are quad, low-voltage, single-pole/single-throw (SPST) analog switches. On-resistance (00Ω, max) is matched between switches
More informationPRODUCTION DATA SHEET
The positive voltage linear regulator is configured with a fixed 3.3V output, featuring low dropout, tight line, load and thermal regulation. VOUT is controlled and predictable as UVLO and output slew
More information1μA Ultra-Tiny Shunt Voltage Reference
EVALUATION KIT AVAILABLE MAX6069 General Description The MAX6069 ultra-low-power shunt references are ideal for space-critical and low-power applications. They are offered in a 4-bump wafer-level package
More informationMC MC35172 LOW POWER DUAL BIPOLAR OPERATIONAL AMPLIFIERS.. GOOD CONSUMPTION/SPEED RATIO : ONLY 200µA/Amp FOR 2.1MHz, 2V/µs
MC3372 MC3572 LOW POWER DUAL BIPOLAR OPERATIONAL AMPLIFIERS GOOD CONSUMPTION/SPEED RATIO : ONLY 200µA/Amp FOR 2MHz, 2/µs SINGLE (OR DUAL) SUPPLY OPERATION FROM +4 TO +44 (±2 TO ±22) WIDE INPUT COMMON MODE
More informationRT9403. I 2 C Programmable High Precision Reference Voltage Generator. Features. General Description. Ordering Information.
I 2 C Programmable High Precision Reference Voltage Generator General Description The RT9403 is a high precision reference voltage generating console consisting of three I 2 C programmable DACs. Each DAC
More informationLogic Configuration Part Number Package Type Packing Method Quantity. IX4423N 8-Pin SOIC Tube 100 IX4423NTR 8-Pin SOIC Tape & Reel 2000
IX23-IX2-IX25 3-mpere Dual Low-Side Ultrafast MOSFET Drivers Features 3 Peak Output Current Wide Operating Voltage Range:.5V to 35V - C to +25 C Operating Temperature Range Latch-up Protected to 3 Fast
More informationUNISONIC TECHNOLOGIES CO., LTD
UNISONIC TECHNOLOGIES CO., LTD 3-TERMINALS 1A POSITIVE VOLTAGE REGULATOR DESCRIPTION The UTC 78DXXA family is monolithic fixed voltage regulator integrated circuit. They are suitable for applications that
More informationDual High-Speed 1.5A MOSFET Drivers
19-132; Rev 2; 6/6 Dual High-Speed 1.A MOSFET Drivers General Description The are dual monolithic MOSFET drivers designed to tralate TTL/CMOS inputs to high voltage/current outputs. The MAX4426 is a dual
More informationIX4340NE. Automotive Grade 5-Ampere, Dual Low-Side MOSFET Driver INTEGRATED CIRCUITS DIVISION. Features. Description. Applications
Automotive Grade -Ampere, Dual Low-Side MOSFET Driver Features AEC-Q100 qualified Two independent drivers, each capable of sourcing and sinking A V to 20V supply voltage range AEC-Q100 Grade 1-0 C to +12
More informationRT9166/A. 300/600mA, Ultra-Fast Transient Response LDO Regulator. General Description. Features. Applications. Ordering Information
RT9166/A 300/600mA, Ultra-Fast Transient Response LDO Regulator General Description The RT9166/A series are CMOS low dropout regulators optimized for ultra-fast transient response. The devices are capable
More informationOBSOLETE - PART DISCONTINUED
General Description The series are three terminal positive regulators designed for a wide variety of applications including local, on-card regulation. The are complete with internal current limiting, thermal
More informationProduct Description. TMP01: Low Power, Programmable Temperature Controller (Temperature Sensor)
TMP0: Low Power, Programmable Temperature Controller (Temperature Sensor) Product Description The TMP0 is a temperature sensor which generates a voltage output proportional to absolute temperature and
More informationAME, Inc. 5A Low Dropout AME1084 Positive Voltage Regulator General Description Functional Block Diagram Input Current Limiting
General Description Functional Block Diagram The is a 5A low-dropout positive voltage regulator. It is available in fixed and adjustable output voltage versions. Overcurrent and thermal protection are
More information5A Low Dropout Linear Regulator
Solved by SP084 TM 5A Low Dropout Linear Regulator TO-- features INPUT Low Dropout oltage:. Typically at 5A Current Limiting and Thermal Protection Output Current: 5A Current Limit:.5A Operating Junction
More information74LS75 Quad Latch. DM74LS75 Quad Latch. General Description. Ordering Code: Logic Diagram. Connection Diagram. Function Table (Each Latch)
74LS75 Quad Latch General Description These latches are ideally suited for use as temporary storage for binary information between processing units and input/output or indicator units. Information present
More informationLDL212. High PSRR, low drop linear regulator IC. Datasheet. Features. Applications. Description
Datasheet High PSRR, low drop linear regulator IC Features Input voltage from 2.5 V to 18 V 2 V AMR Any fixed output voltages, from 1.2 V to 12 V in 1 mv steps (from 1.2 V to 6.6 V in 5 mv steps) available
More informationData Sheet, Rev. 1.1, February 2008 TLE4294GV50. Low Drop Out Voltage Regulator. Automotive Power
Data Sheet, Rev. 1.1, February 2008 TLE4294GV50 Low Drop Out Voltage Regulator Automotive Power Low Drop Out Voltage Regulator TLE4294GV50 1 Overview Features Output voltage tolerance ±4% Very low drop
More informationLD A high PSRR ultra low drop linear regulator with reverse current protection. Datasheet. Features. Applications.
Datasheet 2 A high PSRR ultra low drop linear regulator with reverse current protection Features Input voltage from 1.25 V to 6. V Ultra low drop: 13 mv (typ.) at 2 A load 1 % output accuracy at 25 C,
More informationTLE Data Sheet. Automotive Power. Low Dropout Fixed Voltage Regulator TLE42644G. Rev. 1.1,
Low Dropout Fixed Voltage Regulator TLE42644G Data Sheet Rev. 1.1, 214-7-3 Automotive Power Low Dropout Fixed Voltage Regulator TLE42644G 1 Overview Features Output Voltage 5 V ± 2 % up to Output Currents
More informationFAN ma, Low-IQ, Low-Noise, LDO Regulator
April 2014 FAN25800 500 ma, Low-I Q, Low-Noise, LDO Regulator Features V IN: 2.3 V to 5.5 V V OUT = 3.3 V (I OUT Max. = 500 ma) V OUT = 5.14 V (I OUT Max. = 250 ma) Output Noise Density at 250 ma and 10
More informationLow-Cost, Micropower, Low-Dropout, High-Output-Current, SOT23 Voltage References
19-1613; Rev 3; 3/2 Low-Cost, Micropower, Low-Dropout, General Description The are low-cost, low-dropout (LDO), micropower voltage references. These three-terminal references are available with output
More informationPART. Maxim Integrated Products 1
9-704; Rev 5; /09 Improved Precision Micropower General Description The is a precision two-terminal shunt mode, bandgap voltage reference with a fixed reverse breakdown voltage of.225v. Ideal for space-critical
More informationDescription. Part numbers. AB version C version Output voltage LD2980ABM30TR LD2980ABM33TR LD2980CM33TR 3.3 V LD2980ABM50TR LD2980CM50TR 5.
Features SOT23-5L Stable with low ESR ceramic capacitors Ultra low dropout voltage (0.12 V typ. at 50 ma load, 7 mv typ. at 1 ma load) Very low quiescent current (80 µa typ. at no load in on mode; max
More informationCA3086. General Purpose NPN Transistor Array. Applications. Pinout. Ordering Information. Data Sheet August 2003 FN483.5
Data Sheet August FN8. General Purpose NPN Transistor Array The consists of five general-purpose silicon NPN transistors on a common monolithic substrate. Two of the transistors are internally connected
More informationSHM-14 Ultra-Fast, 14-Bit Linear Monolithic Sample-Hold Amplifiers
INNOVATION and EX C ELL E N C E Ultra-Fast, 1-Bit Linear Monolithic Sample-Hold Amplifiers FEATURES Fast acquisition time: 10ns to ±0.1% 0ns to ±0.0% ns to ±0.01% ±0.001% Nonlinearity 6µV rms output noise
More informationUNISONIC TECHNOLOGIES CO., LTD LM78XX
UNISONIC TECHNOLOGIES CO., LTD LM78XX 3-TERMINAL 1A POSITIVE VOLTAGE REGULATOR 1 TO-220 DESCRIPTION The UTC LM78XX family is monolithic fixed voltage regulator integrated circuit. They are suitable for
More informationAOZ1336DI. Single Channel Smart Load Switch. Features. General Description. Applications. Typical Application AOZ1336DI
Single Channel Smart Load Switch General Description The AOZ1336DI is a single channel load switch with typical 27mΩ on-resistance in a small package. It contains an n-channel MOSFET for up to 5.5V input
More informationRT9166/A. 300/600mA, Ultra-Fast Transient Response LDO Regulator. Features. General Description. Applications
Pin Configurations RT9166/A 3/6mA, Ultra-Fast Transient Response LDO Regulator General Description The RT9166/A series are CMOS low dropout regulators optimized for ultra-fast transient response. The devices
More informationDM7404 Hex Inverting Gates
DM7404 Hex Inverting Gates General Description This device contains six independent gates each of which performs the logic INVERT function. Ordering Code: August 1986 Revised February 2000 DM7404 Hex Inverting
More informationCharge Pump. Loop Filter. VCO Divider
FEATURES PIN CONFIGURATION Low phase noise XO Input from crystal or clock at 10-27MHz. Integrated crystal load capacitor: no external load capacitor required. Output clocks up to 160MHz. Low phase noise
More informationCOM COM GND MAX4644 OFF OFF
9-7; Rev ; / High-Speed, Low-Voltage, 4, General Description The is a single-pole/double-throw (SPDT) switch that operates from a single supply ranging from +.V to +.V. It provides low 4 on-resistance
More information3-TERMINAL 0.1A NEGATIVE VOLTAGE REGULATOR
3-TERMINAL A NEGATIE OLTAGE REGULATOR FEATURES Output Current Up to 1 No External Components Internal Thermal Overload Protection Internal Short-Circuit Limiting Output oltage of 5, 6, 8, 9, 12, 15, 18
More informationV N (8) V N (7) V N (6) GND (5)
4-Channel Low Capacitance Dual-Voltage ESD Protection Array Features Three Channels of Low Voltage ESD Protection One Channel of High Voltage ESD Protection Provides ESD Protection to IEC61000 4 2 Level
More information74F174 Hex D-Type Flip-Flop with Master Reset
74F174 Hex D-Type Flip-Flop with Master Reset General Description The 74F174 is a high-speed hex D-type flip-flop. The device is used primarily as a 6-bit edge-triggered storage register. The information
More informationAdvanced Power Electronics Corp. APE mA LOW DROPOUT LINEAR REGULATOR FEATURES DESCRIPTION APPLICATIONS TYPICAL APPLICATION CIRCUIT APE8800
300mA LOW DROPOUT LINEAR REGULATOR FEATURES Low Dropout Voltage of 250mV at 300mA Guaranteed 300mA Output Current Very Low Quiescent Current at about 30uA ±2% Output Voltage Accuracy for 1.5V,1.8V, 2.5V
More informationST3L01 TRIPLE VOLTAGE REGULATOR
TRIPLE VOLTAGE REGULATOR DUAL INPUT VOLTAGE (12V AND 5V) TRIPLE OUTPUT VOLTAGE (2.6V, 3.3V, 8V) 2.6V GUARANTEED I OUT UP TO 1.2A 3.3V GUARANTEED I OUT UP TO 1.0A 8V GUARANTEED I OUT UP TO 200mA THERMAL
More informationUNISONIC TECHNOLOGIES CO., LTD
UNISONIC TECHNOLOGIES CO., LTD 1A LOW-DROPOUT POSITIE OLTAGE REGULATOR 1 DESCRIPTION The UTC is a low dropout regulator designed to provide output current up to 1A with a typically 5m dropout oltage and
More informationMAX471/MAX472 PART TEMP. RANGE PIN-PACKAGE. MAX471EPA 0 C to +70 C
19-; Rev 2; 12/96 µ µ µ µ PART TEMP. RANGE PIN-PACKAGE CPA CSA EPA C to +7 C C to +7 C -4 C to +8 C 8 Plastic DIP 8 SO 8 Plastic DIP ESA -4 C to +8 C 8 SO CPA C to +7 C 8 Plastic DIP CSA C to +7 C 8 SO
More informationLM34 - Precision Fahrenheit Temperature Sensor
- Precision Fahrenheit Temperature Sensor Features Typical Application Calibrated directly in degrees Fahrenheit Linear +10.0 mv/ F scale factor 1.0 F accuracy guaranteed (at +77 F) Parametric Table Supply
More informationMCP9700/9700A MCP9701/9701A
Low-Power Linear Active Thermistor ICs Features Tiny Analog Temperature Sensor Available Packages: SC-70-5, SOT-23-5, TO-92-3 Wide Temperature Measurement Range: - -40 C to +125 C Accuracy: - ±2 C (max.),
More informationImproved Quad CMOS Analog Switches
Improved Quad CMOS Analog Switches DG211B, DG212B DESCRIPTION The DG211B, DG212B analog switches are highly improved versions of the industry-standard DG211, DG212. These devices are fabricated in proprietary
More information74F30 8-Input NAND Gate
8-Input NAND Gate General Description This device contains a single gate, which performs the logic NAND function. April 1988 Revised October 2000 74F30 8-Input NAND Gate Ordering Code: Order Number Package
More informationAUTOMOTIVE CURRENT TRANSDUCER OPEN LOOP TECHNOLOGY HAH1BVW S/08
AUTOMOTIVE CURRENT TRANSDUCER OPEN LOOP TECHNOLOGY HAH1BVW S/08 Introduction The HAH1BVW family is for the electronic measurement of DC, AC or pulsed currents in high power and low voltage automotive applications
More informationIFX8117. Data Sheet. Standard Power. 1A Low-Dropout Linear Voltage Regulator IFX8117MEV IFX8117MEV33 IFX8117MEV50. Rev. 1.
1A Low-Dropout Linear Voltage Regulator IFX8117MEV IFX8117MEV33 IFX8117MEV5 Data Sheet Rev. 1.1, 21-7-2 Standard Power 1A Low-Dropout Linear Voltage Regulator IFX8117 1 Overview Features 5 V, 3.3 V and
More informationTLE42344G. Data Sheet. Automotive Power. Low Dropout Linear Voltage Regulator. Rev. 1.0,
Low Dropout Linear Voltage Regulator Data Sheet Rev. 1., 21-2-8 Automotive Power Low Dropout Linear Voltage Regulator 1 Overview Features Output voltage tolerance ±2% Low dropout voltage Output current
More informationLT R1. Quad Matched Resistor Network. Applications. Typical Application
Quad Matched Resistor Network Features n Excellent Matching A-Grade: 0.0% Matching B-Grade: 0.0% Matching n 0.ppm/ C Matching Temperature Drift n ±V Operating Voltage (±0V Abs Max) n ppm/ C Absolute Resistor
More informationSC1302A/B/C/D/E/F Dual High Speed Low-Side MOSFET Driver
POWER MNGEMENT Features Operating Voltage +4.5V to +16.5V Fast rise and fall times (20ns typical with 1000pf load) Dual MOSFET driver Peak drive current 2 propagation delay 40ns 8pin SOIC / MSOP lead free
More informationPowered-off Protection, 6, 1.8 V to 5.5 V, SPDT Analog Switch (2:1 Multiplexer)
Powered-off Protection,, 1. V to 5.5 V, SPDT Analog Switch (:1 Multiplexer) DESCRIPTION The is a high performance single-pole, double-throw (SPDT) analog switch designed for 1. V to 5.5 V operation with
More informationLM108/LM108AQML Operational Amplifiers
LM108/LM108AQML Operational Amplifiers General Description The LM108 is a precision operational amplifier having specifications a factor of ten better than FET amplifiers over a 55 C to +125 C temperature
More informationGM4275 GM4275 V2.03. Features. Description. Applications. Block Diagram WIDE INPUT RANGE 5V LOW DROPOUT REGULATOR WITH RESET FLAG
Description The GM4275 series of fixed output, micro-power voltage regulators is designed for applications which require wide input voltage range up to 45V. The GM4275 is an excellent choice for the use
More informationPackage Type. IXDD614PI 8-Pin DIP Tube 50 OUT 8-Lead Power SOIC with Exposed Metal Back Tube 100
IXD_64 4-Ampere Low-Side Ultrafast MOSFET Drivers Features 4A Peak Source/Sink Drive Current Wide Operating Voltage Range: 4.V to V - C to +2 C Extended Operating Temperature Range Logic Input Withstands
More informationHIGH SPEED-10 MBit/s LOGIC GATE OPTOCOUPLERS
DESCRIPTION The / optocouplers consist of an AlGaAS LED, optically coupled to a very high speed integrated photo-detector logic gate with a strobable output. The devices are housed in a compact small-outline
More information