STTH5L06RL. Turbo 2 ultrafast high voltage rectifier. Main product characteristics. Features and benefits. Order codes.

Size: px

Start display at page:

Download "STTH5L06RL. Turbo 2 ultrafast high voltage rectifier. Main product characteristics. Features and benefits. Order codes."

Julia Price
5 years ago
Views:

1 STTH5L6 Turbo 2 ultrafast high voltage rectifier Main product characteristics K I (V) 5 V RRM 6 V I R (max) 125 µ / 15 µ T j (max) 175 C V (max) 1.5 V K TO-22C STTH5L6D K TO-22PC STTH5L6P t rr (max) 95 ns K eatures and benefits Ultrafast switching Low reverse recovery current Reduces switching & conduction losses Low thermal resistance Description The STTH5L6, which uses ST Turbo 2 6V technology, is specially suited as boost diode in discontinuous or critical mode power factor corrections. This device, available in TO-22C, TO-22PC DPK and DO-21D, is also intended for use as a free wheeling diode in power supplies and other power switching applications NC Order codes Part number STTH5L6 DPK STTH5L6B STTH5L6RL STTH5L6D STTH5L6B STTH5L6B-TR STTH5L6P DO-21D STTH5L6 Marking STTH5L6 STTH5L6 STTH5L6D STTH5L6B STTH5L6B STTH5L6P March 27 Rev 2 1/1 1

2 Characteristics STTH5L6 1 Characteristics Table 1. bsolute ratings (limiting values) Symbol Parameter Value Unit V RRM Repetitive peak reverse voltage 6 V I (RMS) I (V) RMS forward current verage forward current TO-22C, TO-22PC, DO-21D 2 DPK 1 TO-22C, DPK T c = 15 C δ =.5 DO-21D T I = 5 C δ =.5 TO-22PC T c = 135 C δ =.5 5 I RM Repetitive peak forward current t p = 5 µs, = 5 khz square 65 TO-22C, TO-22PC 9 I SM Surge non repetitive forward current tp = 1 ms Sinusoidal DO-21D 11 DPK 6 T stg Storage temperature range C T j Maximum operating junction temperature C Table 2. Thermal parameters Symbol Parameter Maximu m Unit R th(j-c) Junction to case TO-22C, DPK 3.5 TO-22PC 6. R th(j-l) Junction to lead 2 R th(j-a) Junction to ambient (1) L = 1 mm DO-21D 75 C/W 1. With recommended pad layout (see igure 15) Table 3. Static electrical characteristics Symbol Parameter Tests conditions Min. Typ. Max. Unit T j = 25 C 5 I R Reverse leakage current V R = 6 V T j = 15 C TO-22C, DPK, TO-22PC DO-21D µ V orward voltage drop I = 5 T j = 25 C 1.3 T j = 15 C V To evaluate the maximum conduction losses use the following equation: 2 P =.89 x I (V) +.33 I (RMS) 2/1

3 STTH5L6 Characteristics Table 4. Dynamic electrical characteristics Symbol Parameter Tests conditions Min. Typ. Max. Unit t rr Reverse recovery time I = 1 di /dt = - 5 /µs V R = 3V T j = 25 C ns t fr orward recovery time I = 5 di /dt = 1 /µs V R = 1.1 x V max T j = 25 C 15 ns V P orward recovery time I = 5 di /dt = 1 /µs T j = 25 C 7 V igure 1. Conduction losses versus average current igure 2. orward voltage drop versus forward current 7 6 P(W) δ =.5 δ =.1 δ =.2 δ =.5 1. I M() T j=15 C (maximum values) 5 4 δ = 1 1. T j=15 C (typical values) T j=25 C (maximum values) 3 2 T 1. 1 I (V) () δ=tp/t tp V M (V) igure 3. Relative variation of thermal impedance junction to case versus pulse duration (TO-22C, DPK) igure 4. Relative variation of thermal impedance junction to case versus pulse duration (TO-22PC) 1. Z th(j-c) /Rth(j-c) 1. Z th(j-c) /Rth(j-c) δ =.5.6 δ = δ =.2 δ =.1 Single pulse t (s) p δ=tp/t 1.E-3 1.E-2 1.E-1 1.E+ T tp δ =.2 δ =.1 Single pulse t (s) p δ=tp/t 1.E-3 1.E-2 1.E-1 1.E+ 1.E+1 T tp 3/1

4 Characteristics STTH5L6 igure 5. Relative variation of thermal impedance junction ambient versus pulse duration (Epoxy R4, L leads = 1 mm) (DO-21D) igure 6. Peak reverse recovery current versus di /dt (9% confidence) Z th(j-c) /Rth(j-c) δ =.5 δ =.2 δ =.1 Single pulse t (s) p δ=tp/t 1.E-1 1.E+ 1.E+1 1.E+2 1.E+3 T tp I RM() V R=4V I =.25 x I(V) I =.5 x I(V) I=I (V) di /dt(/µs) I =2 x I(V) igure 7. Reverse recovery time versus di /dt (9% confidence) igure 8. Reverse recovery charges versus di /dt (9% confidence) 1 9 t (ns) rr V R=4V 5 45 Q (nc) rr V R=4V I =2 x I(V) I =2 x I(V) I=I (V) I =.5 x I(V) 5 4 I=I (V) I =.5 x I(V) di /dt(/µs) di /dt(/µs) igure 9. Softness factor versus di /dt (typical values) igure 1. Relative variations of dynamic parameters versus junction temperature S factor I=I (V) V R=4V.8.25 I=I (V).6 V R=4V T j( C) Reference:.4 di /dt(/µs) S factor IRM QRR 4/1

5 STTH5L6 Characteristics igure 11. Transient peak forward voltage versus di /dt (9% confidence) igure 12. orward recovery time versus di /dt (9% confidence) V P(V) I=I (V) t (ns) fr I=I (V) V R=1.1 x V max di /dt(/µs) di /dt(/µs) igure 13. Junction capacitance versus reverse voltage applied (typical values) igure 14. Thermal resistance junction to ambient versus copper surface under tab (epoxy R4, ecu = 35 µm) (DPK) 1 C(p) =1MHz V OSC=3mV T j=25 C 8 7 R th(j-a) ( C/W) V (V) R S CU(cm²) igure 15. Thermal resistance junction to ambient versus copper surface under each lead (epoxy printed circuit board R4, copper thickness: 35µm) (DO-21D) 8 R th(j-a) ( C/W) DO-21D S CU(cm²) /1

6 Package information STTH5L6 2 Package information Epoxy meets UL94, V Cooling method: by conduction (C) Recommended torque value:.8 Nm (TO-22PC) /.55 Nm (TO-22C) Maximum torque value: 1. Nm (TO-22PC) /.7 Nm (TO-22C) Table 5. TO-22C dimensions Dimensions Ref. Millimeters Inches Min. Max. Min. Max H2 Ø I C C D L2 L5 L6 L7 E G L9 L4 D M E H L typ..645 typ. L L L G L L M 2.6 typ..12 typ. Diam. I /1

7 STTH5L6 Package information Table 6. TO-22PC dimensions Dimensions Ref. Millimeters Inches Min. Max. Min. Max H B B D Dia E L3 L2 L4 1 L6 L5 D L G G H L2 16 Typ..63 Typ. L G1 E L G L L L Dia Table 7. DO-21D dimensions Dimensions Ref. Millimeters Inches Min. Max. Min. Max. B Note 1 E E Note 1 B ØD ØC Note 2 B C D E Notes 1 - The lead diameter ø D is not controlled over zone E 2 - The minimum length which must stay straight between the right angles after bending is.59"(15mm) 7/1

8 Package information STTH5L6 Table 8. DPK dimensions Dimensions Ref. Millimeters Inches Min. Max. Min. Max E B2 C L2 B H R D B C L4 G B 1 C R C D E MIN. 2 G H V2 L2.8 typ..31 typ. L V2 8 8 igure 16. DPK footprint (dimensions in mm) In order to meet environmental requirements, ST offers these devices in ECOPCK packages. These packages have a lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPCK is an ST trademark. ECOPCK specifications are available at: 8/1

9 STTH5L6 Ordering information 3 Ordering information Ordering code Marking Package Weight Base qty Delivery mode STTH5L6 STTH5L6 6 mmopack DO-21D 1.16 G STTH5L6RL STTH5L6 19 Tape & reel STTH5L6D STTH5L6D TO-22C 1.9 g 5 Tube STTH5L6B STTH5L6B 75 Tube DPK.3 g STTH5L6B-TR STTH5L6B 25 Tape & reel STTH5L6P STTH5L6P TO-22PC 1.7 g 5 Tube 4 Revision history Date Revision Changes Nov-21 1 Last release. 31-Mar-27 2 Merge with TO-22C, TO-22PC and DPK version. 9/1

10 STTH5L6 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ( ST ) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. ll ST products are sold pursuant to ST s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET ORTH IN ST S TERMS ND CONDITIONS O SLE ST DISCLIMS NY EXPRESS OR IMPLIED WRRNTY WITH RESPECT TO THE USE ND/OR SLE O ST PRODUCTS INCLUDING WITHOUT LIMITTION IMPLIED WRRNTIES O MERCHNTBILITY, ITNESS OR PRTICULR PURPOSE (ND THEIR EQUIVLENTS UNDER THE LWS O NY JURISDICTION), OR INRINGEMENT O NY PTENT, COPYRIGHT OR OTHER INTELLECTUL PROPERTY RIGHT. UNLESS EXPRESSLY PPROVED IN WRITING BY N UTHORIZED ST REPRESENTTIVE, ST PRODUCTS RE NOT RECOMMENDED, UTHORIZED OR WRRNTED OR USE IN MILITRY, IR CRT, SPCE, LIE SVING, OR LIE SUSTINING PPLICTIONS, NOR IN PRODUCTS OR SYSTEMS WHERE ILURE OR MLUNCTION MY RESULT IN PERSONL INJURY, DETH, OR SEVERE PROPERTY OR ENVIRONMENTL DMGE. ST PRODUCTS WHICH RE NOT SPECIIED S "UTOMOTIVE GRDE" MY ONLY BE USED IN UTOMOTIVE PPLICTIONS T USER S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. ll other names are the property of their respective owners. 27 STMicroelectronics - ll rights reserved STMicroelectronics group of companies ustralia - Belgium - Brazil - Canada - China - Czech Republic - inland - rance - Germany - Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of merica 1/1

STTH12R06. Turbo 2 ultrafast high voltage rectifier. Features. Description

STTH12R06. Turbo 2 ultrafast high voltage rectifier. Features. Description STTH12R6 Turbo 2 ultrafast high voltage rectifier eatures Ultrafast switching Low reverse recovery current Low thermal resistance Reduces switching losses Package insulation voltage: TO22C ins: 25 V RMS