T Series Thruster alculation onstants V IMPT VELOITY (in/sec) T Factor 9/16" 3/4" 1-1/16" 1-1/2" 2" SF TF
|
|
- Laureen Armstrong
- 5 years ago
- Views:
Transcription
1 imba bsorbers bsorber Dimensions Linear Thruster ylinders ore D E F 9/16" (2).75 # /4" (4).88 # /16" (9) 1 # D 1-1/2" (17) 1.25 # (TE) 4.75 (TE) 2" (31) 1.5 1/ (T) 5.75 (T) F E How to Size a bsorber E T (Total energy) equals the sum of E K (Kinetic energy) and E W (Work energy) Example: determine the proper shock absorber for a model T-46 Thruster mounted vertically with an attached load of 15 lbs., operating air pressure of 8 PSI, and a velocity of 2 in/sec., at a cycle rate of 3,6 per hour. P = 8 PSI V = 2 in/sec S = 6 in W U = 15 lbs = 3,6 cycles / hr From the charts for a 3/4" bore "T" series Thruster SF =.41 TF1 =.442 TF2 =.632 TF3 =.63 E K = ((15 lbs + ( (.63 x 6 in))) / 772) x (2 in/sec) 2...E K = 8.3 in-lbs E WV = ((.442 x 8 PSI) + 15 lbs + ( (.63 x 6 in))) x.41...e WV = 21.6 in-lbs E T = E K + E WV = in-lbs... E T = E T x = 15,685 in-lbs/hr hecking specifications chart: both E T and E T are less than maximum. nd per sizing graph for a model T-4: in-lbs total energy at 2 in/sec velocity, use a heavy duty model HS-4 absorbers. shock Selecting the proper shock absorber model is accomplished using the shock absorber graph given for each Thruster bore. The intersection of the total energy per stroke "E T", and velocity at shock absorber contact "V", indicates the proper shock absorber model. E T is calculated by the equation given below using values determined for: P = ir pressure (PSI) V = Velocity at impact (in/sec) S = Stroke of the Thruster (in) W U = Load attached to the Thruster mounting plate (lbs.) = ycles per hour SF = factor TF1 = Thruster factor #1 TF2 = Thruster factor #2 TF3 = Thruster factor #3 Note the Work energy calculation varies with mounting position, E WH Horizontal, or E WV Vertical. E K = ((W U + (TF2 + (TF3 x S))) / 772) x V 2...(Kinetic energy, in-lbs) E WH = TF1 x SF x P...(Work energy, in-lbs) HORIZONTL E WV = ((TF1 x P) + W U + (TF2 + (TF3 x S))) x SF...(Work energy, in-lbs) VERTIL E T = E K + E W...(Total energy per stroke, in-lbs) E T = E T x...(total energy per hour, in-lbs/hr) E T and E T...must not exceed maximum listed in specifications 82
2 T Series Thruster alculation onstants V IMPT VELOITY (in/sec) T Factor 9/16" 3/4" 1-1/16" 1-1/2" 2" SF TF TF TF (E T) Max. in.-lbs per cycle (E T - ) max. in.-lbs. per hour 36, 125, 3, 475, 622, Velocity vs. Load for bsorbers 5/16" - 7/16" ORE LS-17 HS-17 SS E TOTL ENERGY (in-lbs) T 1-1/4" - 1-1/2" ORE 2 imba bsorbers TE Series Thruster alculation onstants TE Factor 9/16" 3/4" 1-1/16" 1-1/2" 2" SF TF TF TF (E T) Max. in.-lbs per cycle (E T- ) max. in.-lbs. per hour 36, 125, 3, 475, 622, 9/16" - 3/4" ORE 7/8" - 1-1/16" ORE Flow ontrols Linear Thrusters Pneu-Turn Rotary ctuators Ultran ylinders bsorbers (Pneumatic ctuators) Pneu Moment Transition Plates Multi-xis onfigurations Position Sensing Switches pplication hecklist 83 For Technical ssistance:
3 imba bsorbers øf bsorber Dimensions For each model, dimensions and engineering specifications are the same for Light, Standard, and Heavy Duty bsorbers. (LS, SS and HS model numbers). Dimensions (in.) bsorber Selection Guide ore Ultran Ultran Slide 5/16" (7) 7/16" (1) 9/16" (2) S-2 3/4" (4) S-4 7/8" (6) 1-1/16" (9) 1-1/4" (12) 1-1/2" (17) N/ S-2 D E F G H I S /8-32 UNEF.12 N/ S /16-28 UNEF S /2-2 UNF S /4-16 UNF S UNF ød G Engineering Specifications bsorber ore S UNF 1,7 67, 1, S-4 S-9 S-9 S-17 S-17 2" (31) S-31 S-31 S-2 S-4, S-9, S-17, S-31 (S) Stroke Inches Ultran Slide and Ultran Rodless ylinders Note: Do not let shock absorbers bottom out. The shock should not be used as a stroke adjuster. stop collar is needed for the shock if stroke adjustment is required. Thread Type H øe S /8-32 UNEF 2 36, S /16-28 UNEF , S /2-2 UNF 19 3, S /4-16 UNF 4 475, øf (E T ) Max. (E T -) Max. In-Lbs. In-Lbs. Per ycle Per Hour (F p ) Max Force Lbs. ød G Nominal oil Spring Force Extension (Lbs.) ompression (Lbs.) øe (F D ) Max. Propelling Force (Lbs.) H I Weight (Oz.)
4 bsorber/stroke djustment (in.) ore D E F bsorber Dimensions 5/16" (7) /8-32 UNEF 7/16" (1) /8-32 UNEF 9/16" (2) /16-28 UNEF 3/4" (4) /16-28 UNEF 7/8" (6) /2-2 UNF 1-1/16" (9) /2-2 UNF 1-1/4" (12) /4-16 UNF 1-1/2" (17) /4-16 UNF 2" (31) UNF Note: Do not let the shock absorbers bottom out. The shock should not be used as a stroke adjuster. stop collar is needed for the shock if stroke adjustment is required. How to Size a bsorber 85 imba bsorbers Selecting the proper shock absorber model is accomplished using the shock absorber graph given for each Ultran bore. The intersection of the total energy per stroke "E T", and velocity at shock absorber contact "V", indicates the proper shock absorber model. E T is calculated by the equation given below using values determined for: P = ir pressure (PSI) V = Velocity at impact (in/sec) W U = Load attached to the Ultran mounting plate (lbs.) = ycles per hour SF = factor UF1 = Ultran factor #1 UF2 = Ultran factor #2 E T (Total energy) equals the sum of E K (Kinetic energy) and E W (Work energy) Note the Work energy calculation varies with mounting position, E WH Horizontal, or E WV Vertical. E K = ((W U + UF2) / 772) x V 2...(Kinetic energy, in-lbs) E WH = UF1 x SF x P...(Work energy, in-lbs) HORIZONTL E WV = ((UF1 x P) + W U + UF2) x SF...(Work energy, in-lbs) VERTIL Example: determine the proper shock absorber for a model Ultran Slide mounted vertically with an attached load of 15 lbs., operating air pressure of 8 PSI, and a velocity of 2 in/sec., at a cycle rate of 3,6 per hour. P = 8 PSI V = 2 in/sec S = 6 in W U = 15 lbs = 3,6 cycles / hr From the charts for a 3/4" bore Ultran Slide SF =.41 UF1 =.442 UF2 = E K = (15 lbs ) / 772) x (2 in/sec) 2...E K = 8.56 in-lbs E WV = ((.442 x 8 PSI) + 15 lbs x.41...e WV = in-lbs E T = E K + E WV = in-lbs... E T = E T x = 17,457 in-lbs/hr hecking specifications chart: both E T and E T are less than maximum. bsorber Stroke djustment nd per sizing graph for a model UGS-4: in-lbs total energy at 2 in/sec velocity, use a heavy duty model HS-4 shock absorbers. D F 1. OF DJUSTMENT D F E For Technical ssistance: Flow ontrols Linear Thrusters Pneu-Turn Rotary ctuators Ultran ylinders bsorbers (Pneumatic ctuators) Pneu Moment Transition Plates Multi-xis onfigurations Position Sensing Switches pplication hecklist
5 minute imba bsorbers Velocity vs. Load for bsorbers 5/16" - 7/16" ORE 9/16" - 3/4" ORE 2 1-1/4" - 1-1/2" ORE 7/8" - 1-1/16" ORE LS SS HS E TOTL ENERGY (in-lbs) *Ultran Maximum Velocity 2 inches per second or cycle rate not to exceed 15 per V IMPT VELOITY (in/sec) T 86
6 imba bsorbers 9.43 ÿ.43 Ø JM NUT bsorber ore.47 Ø.5 3/4-16 UNF-2 Table 3. bsorber Ratings END LOK.56 JM JM NUT (S) Stroke S S HEX JM NUT (NOT INLUDED) Dimensions (in.) 1-1/16" bore Dimensions (in.) 1-1/2" bore 1/2-2 UNF-2 UNF-2 Thread Type 1/2"-2 UNF 3/4"-16 UNF ø US US US US bsorber 1.12 HEX (E ) Max. In-Lb. Per ycle Ultran Slide & Ultran Rodless ylilnders STOP OLLR Note: The Ultran Stroke Length needs increased by the dimension in order to maintain intended stroke length. The overall length increases by the same amount. The dimension indicates maximum amount of stroke adjustment attainable. The Hex Jam Nut is included with the shock absorber ÿ.44 High Load Ultran.75 HEX (E -) Max. In-Lb. Per ycle 88 ImpactVelocity (in/sec) (F ) Max. Force Stop ollar S9 S-9 bsorber djustment Range S17 S djustment Sett ing Normal oil Spring Force (F ) Max. Propelling Extension ompression Force T T P D Weight 5 178, , Ø IMPT VELOITY (in./sec.) bsorber djustment Range END LOK SHOK SETTING High Load Ultran STOP OLLR JM NUT (INLUDED WITH SHOK) SHOK (HS 17) ø US ø1.69 US ø1.12 GRPH 5 Note: The High Load Ultran Slide needs increased by the dimension in order to maintain intended stroke length. The overall length increases by the same amount. The dimension indicates maximum amount of stroke adjustment attainable. ø
Features and Benefits
...................................................................................- Features and Benefits.............................................................................. How to Order....................................................................................
More informationRodless cylinders Series 1600
Rodless cylinders Series 00 Basic version 0.Ø.stroke.0.M Max. stroke mt.) AL AI RA RB AF TC AM L LA+stroke AH TD AE TA RV Possibility of a single feed cylinder head AI AP AB AC AD TD TE TB AG RT Left head
More informationVane Type Rotary Actuators Series Variations
Vane Type Rotary Actuators Series Variations Vane Type Exterior CRB Series 0,, 0,, CRBU Series 0,, 0,, CRB Series, 6, 80, Has a compact body with exterior dimensions that do not change regardless of the
More informationFeatures: Specification. Model. Acting type. Tube I.D.(mm) Port size. No. of port. Medium Operating pressure range
& F * eries to 3mm ore Features: qual forces on both ends of the piston. Force connection direct, torque safe. agnetic piston standard. % spacesavings. nd caps with 3 air connections and adjustable cushioning.
More informationBumper Technical Information
OMPONNT NRY ORIN PROUT ithin the family of antivibration products, we are introducing a line of NRY-ORIN PROUT. NRL In order to lend full understanding of the importance and capabilities of this product
More informationFormulae and examples of calculation
Shock absorber Formulae and examples of calculation A shock absorber decelerates linearly. Roughly 90% of shock absorber applications can be modelled if the following 4 factors are known: 1. Mass to slow
More informationShock Absorber. Absorbing impact and noise. Shock absorber. Series D- -X. Shock absorber: RB series Coolant resistant type: RBL series
hock Absorber RB eries Absorbing impact and noise Dampening to meet the high speed requirements of the modern world. hock absorber: RB series oolant resistant type: RBL series hock absorber Automatic adjustment
More informationAMORTIGUADORES DE IMPACTO
MORTUORS MPTO oto Nº ódigo escripción am. Ub. 00 01 0 0 0 0 0 mortiguador de o auto-compensado MX1 arr. MM mortiguador de o auto-compensado MX1 arr. MM mortiguador de o auto-compensado MX1 arr. MM mortiguador
More informationHigh Power Cylinder. RHC Series. ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100. REA REB REC Smooth MQ RHC RZQ D- -X. Low Speed
High Power ylinder RH Series ø, ø, ø3, ø4, ø, ø, ø8, ø RE RE RE RH 34 High power cylinder: cushioning for high speed operation (3 low/medium speed operation with heavy loads The capacity to absorb to times
More informationø6, ø10, ø15, ø20, ø25, ø32, ø40, ø50, ø63 How to Order Switch rail Nil Standard stroke Refer to page 12 for standard stroke.
Magnetically Coupled Rodless Cylinder: Direct Mount ype Series ø, ø, ø, ø, ø, ø, ø, ø0, ø Direct mount type mm mm mm mm mm mm mm 0 0 mm mm 00 MB Piping type Both sides piping type Centralized piping type
More informationDIM. A (+ 0,05 0,51) .135 ±.015 (3,43 ± 0,38) COMMON LUG INTEGRAL ASSEMBLY NUT, DO NOT REMOVE 1/4-32 UNEF-2A THREAD
Multi-Deck SERIES 0 SERIES 0 0." Diameter, / Amp, Standard, Military SR FEATURES Proven Quality in Thousands of Applications Gold-plated Contact System 0,,, 0 and 0 Angle Options MIL Qualified Versions
More informationPrecision Ball Screw/Spline
58-2E Models BNS-A, BNS, NS-A and NS Seal Outer ring Shim plate Seal Spline nut Seal Collar Shim plate Seal End cap Ball Outer ring Ball screw nut Outer ring Ball Retainer Retainer Outer ring Point of
More informationCartridge Valves Technical Information. Quick reference
Quick reference Contents CPF0... 8. CP600-5... 8. CP60-5... 8. 066 handle kit... 8.5 MP06... 8.6 MP... 8.6 X05-FD0 Traction manifold... 8.9 X05-FD6 Traction manifold... 8.0 X05-FD0 Traction manifold...
More informationhard anodized aluminum extrusion die cast aluminium acetalic resin nickel plated steel die cast aluminium nitrile rubber stainless steel 3 Version
YR Pneumatic actuators for process automation Pneumatic connections configuration: NMUR interface V/VE Top pinion: V/VE Holes for sensor box connection: V/VE ottom holes for connecting valves: SO Single
More informationSpecifications. Stroke length. Small direct mounting cylinder MDC2 Series. Port size: M3 (For 4, 6, 8 mm bore) M5 (For 10 mm bore) Descriptions
mall direct mounting cylinder 2 eries ort size: (or,, mm bore) (or mm bore) I symbol ingle acting spring return type ingle acting spring extend type ouble acting VI. pecifications escriptions ore size
More informationHDF series - PARALLEL GRIPPER
Operation specification and Ordering expression Internal structure DS Angular DM 0 Angular Specification ore size Type of operation Fluid Pressure range Range of service temperature kgf/cm (kpa) Max. operation
More informationVacuum capacitors overview Capacitor selection guides
JENNINGS TECHNOLOGY Vacuum capacitors overview Capacitor selection guides Capacitors by type Capacitor type Vacuum variable Capacity max. (pf) Test voltage / Hz Model no. series Page number 7.,, 1 CVDD-
More informationSizing caliper disc brakes can be an easy process.
Sizing caliper disc brakes can be an easy process. The goal is to determine how much braking tque is required and finding the most cost effective and efficient brake and disc diameter package. Go to the
More informationBall Reverser. Ball Reverser Actuator. FLENNOR Power Transmission Products. Patented
Ball Reverser FLENNOR Power Transmission Products Ball Reverser Actuator Patented Ball Reverser Principle General Information NORCO'S Ball Reverser Actuator is a unique actuator which provides automatic
More informationUniversal type Port size AS13 1F-M3. M3 x 0.5 M5 x 0.8 AS23 1F-01 AS23 1F-02 AS33 1F-02 AS33 1F-03 AS43 1F-04 R 1/8 R 1/4 R 1/4 R 3/8 R 1/2
Minimizes installation time and cost Reduces the mounting height and enables compact machinery design. Effective area is larger than the former model. Tube swivels 0 Universal type permits 0 piping swivel.
More informationAPEX DYNAMICS, INC. Staianless
APEX DYNAMICS, INC. HIGH PRECISION PLANETARY GEARBOXES AE / AER Series Staianless High precision high speed planetary gearboxes AE / AER series Apex Dynamics, Inc. is the world s most productive manufacturer
More informationM/60210/M Miniature rotary actuators
M/6020/M Miniature rotary actuators Double acting - Magnetic piston - Ø 2 and 20 mm Smooth operation with zero backlash Lightweight ompact envelope dimensions Integral magnets for positional feedback TEHNIL
More informationCipriani Harrison Valves Corp.
Butterfly Valve pplication Stainless steel hygienic butterfly valves are used in process piping systems for isolation and control. Butterfly valves operate either manually or automatically. Working Principle
More informationPRESSURE GAUGE SELECTORS
PRESSURE GUGE SELECORS Gauge isolator valves are designed to protect pressure gauges from pressure shocks when the pressure reading is not required; after each reading setting the selector to the closed
More informationRV SeRieS S P E C I F I C A T I O N S
SPECIFICATIONS High-Performance Precision Rotation Stages R V S e R i e S GUARANTEED The RV Series rotation stages provide high-precision angular positioning accuracy combined with high load capacity.
More informationOur classic for extreme parallel offset: Standard S series. The Schmidt-Kupplung compensates variable parallel Symbiosis of performance, com-
Schmidt-Kupplung Power Plus SK_PP_/0 The Schmidt-Kupplung series Schmidt-Kupplung Our classic for extreme parallel offset: Standard S series The Schmidt-Kupplung compensates variable parallel Symbiosis
More informationFront flange FLV. Max. [knm/stroke]
SDN 45 Safety shock absorbers SDN are a low cost alternative to industrial shock absorbers appropriate to customers requirements. Typical applications: cranes, storage and retrieval unit for highbay warehouse,
More informationCoating K = TFE wear resist, dry lubricant Kerkote X = Special coating, (Example: Kerkote with grease)
HAYD: 0 WGS0 Low Profile, Screw Driven Slide WGS0 Linear Rail with Hybrid 000 Series Size Single and Double Stacks and 000 Series Size Single and Double Stacks Kerk Motorized WGS Linear Slide utilizes
More informationRGS08 Linear Rails: RGS08 Non-Motorized With and Without Guide Screw. RGS08 Non-Motorized Linear Rails
RGS08 RGS08 Non-Motorized With and Without Guide RGS08 Non-Motorized Linear Rails RG Series linear rails are available: RGS08 Non-Motorized, -driven linear rail RGS08 Non-Motorized linear rail without
More informationCV3000 Series. Characterized Insert Control Valves
CV3000 Series Characterized Insert Control Valves The CV3000 Series is a v-type control valve for precise control allowing high pressure drop capability with straight-through flow and bubble-tight shut
More informationSelection Calculations For Linear & Rotary Actuators
H-8 For Electric Linear Slides and Electric Cylinders First determine your series, then select your product. Select the actuator that you will use based on the following flow charts: Selection Procedure
More informationOur policy is one of continued research and development. We therefore reserve the right to
D/99000, D/99000 ompact cylinders on-magnetic and magnetic piston Double acting Ø 12 to 160 mm ight weight ompact design, which is considerably shorter than IS/VDA or FA equivalent. ow friction characteristics
More informationBettis RGS F-Series. Quarter-Turn Spring-Return (SR) and Double-Acting (DA) Pneumatic Actuators. Product Data Sheet RGS Rev.
Bettis RGS F-Series Quarter-Turn Spring-Return (SR) and Double-Acting (DA) Pneumatic Actuators Output Torques to 500,000 in-lb (56,492 N m) Ductile Iron or Stainless-Steel Construction Temperatures from
More informationEngineering Reference
Engineering Reference Sizing and Selection of Exlar Linear and Rotary Actuators Move Profiles The first step in analyzing a motion control application and selecting an actuator is to determine the required
More informationBore size: 4, 6, 8, 10. Double acting. Double acting Compressed air Withstanding pressure Ambient temperature Port size
*2 2 2 G 2 V2 /V2 V 2 * * U U G U2 2 U 2 G pecifications troke length ore size ylinder switch specifications escriptions pplications utput method ower voltage oad voltage oad current urrent consumption
More information35P-3 HH 3 HH 2 35P-3. f32 f40. f50 f63. f80 f100. Switch Set. Type Standard type Switch Set
f f f f f f Kind of piston seal U seal Slipper Seal U seal Slipper Seal Nominal pressure. MPa Maximum allowable pressure. MPa Proof test pressure MPa Minimum operating pressure. MPa or less Working speed
More informationApplication PN 16 / 40 DN Product features. Compact overall height Body shape gives optimum flow characteristic
pplication Control of gases, vapours and liquids. The modular concept of valve, multi spring actuator and digital FOXBORO/Eckardt positioner Type SRD 992 facililates trouble free expansion to allow for
More informationPneumatic Valves. Valve Actuators
Air Preparation Units Symbol Description Pneumatic Valves Symbol Description Symbol Cylinders Description Filter / Separator with manual drain 3-Position, 4-Way, APB ports closed, center pos. Standard
More informationPN LINE. PN Line. PX Line. PA Line. PU Line PX LINE. PV Line PA LINE & TUBINGS PU LINE PV LINE. Brass Push-in fittings
I NDEX PV LINE PX LINE PU LINE PA LINE & TUBINGS PN LINE Brass Push-in fittings Stainless Steel Push-in fittings Brass Standard fittings and Flexible Hoses Couplings and Multiple Connectors Function fittings
More informationRotary modules.
Rotary modules www.comoso.com www.comoso.com Rotary modules ROTARY MODULES Series Size Page Rotary modules RM swivel unit 156 RM 08 160 RM 10 162 RM 12 164 RM 15 168 RM 21 172 RM rotor 176 RM 50 180 RM
More informationIdentification system for short product names. Changes/amendments at a glance. 2 Bosch Rexroth AG OBB omega modules R ( )
Omega Modules OBB 2 OBB omega modules R9990079 (206-05) Identification system for short product names Short product name Example: O B B - 085 - N N - System = Omega module Guideway = Ball Rail System Drive
More informationPNEUMATIC AND HYDRAULIC MULTI-MOTION ACTUATOR
PNUT N YU UT-TN TUT ajor enefits Provides independent rotary and linear motion from one output shaft. deal for part transfer, positioning, and orientation. ealed shaft ball bearings on rotary section provide
More informationWith buffer. Vacuum entry port Mounting. Female. thread VAC. Barb. fitting. One-touch fitting VAC. One-touch. fitting VAC. Barb.
Type 13-11-2 to 13-11-2 Series ZPT Vertical vacuum entry 13-11-2 to 13-11-3 Series ZPR Lateral vacuum entry with One-touch fitting 13-11- to 13-11- Series ZP Lateral vacuum entry with arb fitting Pad form
More informationThe 505F Series 3/4/5-Way Ball Valve. Standard Features and Benefits. Operating Conditions. Specifications. Options
The 505F Series //5-Way Ball Valve The 505F is a true multi-way ball valve with balanced fourseat construction. This full port valve is available in a variety of flow plans which can replace multiple two-way
More informationBOLT SIZE Rec.Torque Ft/Lbs. Max Torque Ft/Lbs
BOLT SIZE Rec.Torque Ft/Lbs Max Torque Ft/Lbs "-0 5 "- "- "- 5 "- "-0 () 7 (9) (5) 5 (0) 9 () 5 () 50 () 70 (95) 00 () 5 (70) 5 (70) 5 () Material Add Suffix to P/N P09 THRU P PIPE CLAMPS FOR RIGID STEEL
More information1. About Linear Ball Bearing
1. bout inear all MM Specifications M Series Specifications (Standard) M Series Specifications (engten) Ød Ø Ø Ød Ø Ø W W W W INR RING d (m) M4UU 4 2 MUU 1 1.1.. 2.7 21 27 MUU 24 1.1.3 17. 3. 27 41 1 MUU
More informationBEARINGS Pillow Blocks
The bearing size is usually selected according to the required bearing life and reliability under a specified type of load charged on the bearing. The load applied to the bearing operating under a static
More information11.1 Virtual Work Procedures and Strategies, page 1 of 2
11.1 Virtual Work 11.1 Virtual Work rocedures and Strategies, page 1 of 2 rocedures and Strategies for Solving roblems Involving Virtual Work 1. Identify a single coordinate, q, that will completely define
More informationSelection Calculations For Motorized Actuators
Selection Calculations/ Selection Calculations For Linear Slides and Cylinders Select from the EZS Series, EZS Series for Cleanroom Use, EZC Series First determine your series, then select your model.
More informationLinear Actuators Catalog. R2A - R4 Series Rodless Actuators
Linear Actuators Catalog R2A - R4 Series Rodless Actuators Kollmorgen: Your partner. In Motion. Every solution comes from a real understanding of the challenges facing machine designers and users. Innovators
More informationPlain diffuser. Dimensions
Dimensions Ø U Ød B C Ø E Ø A Description is a circular diffuser with an unperforated adjustable face plate and can be used for both supply and extract air. The diffuser can be switched between horizontal
More informationHRN/HRN-C Series Hydraulic Vane Rotary Actuators
HRN/ Hydraulic Vane Rotary Actuators Vane Actuators Tork-Mor HRN Contents Features... 2 Ordering Information... Engineering Data / Specifications... Dimensions... Features... 1 Ordering Information...12
More informationSRL3. Rodless cylinder. Rodless type. ø12 ø16 ø20 ø25 ø32 ø40 ø50 ø63 ø80 ø100
Overview High load and long service life. that can operate at high speeds. Ample variation with sizes available from ø to ø00. eatures lat cylinder lat piston with a structure that could take on the load.
More informationDMHP3(4)L(T)2A00 Series
STANDARDS Valve body: ASME B16.34 Material certification: EN10204-3.1 MTR Quality assurance: ISO 9001:2008 Steel casting: MSS SP-55 Valve marking: MSS SP-25 Valve test: API 598 Direct mount: ISO 5211 End
More informationRGS06 Linear Rails: RGS06 Non-Motorized With and Without Guide Screw. RGS06 Non-Motorized Linear Rails
on-motorized With and Without Guide on-motorized Linear Rails RG Series linear rails are available: on-motorized, -driven linear rail on-motorized, Wide format, -driven linear rail on-motorized, Wide format,
More informationAPPENDIX. SELECTING THE SureServo SERVO SYSTEM. In This Appendix... Selecting the SureServo Servo System...B 2. Leadscrew - Example Calculations...
SELECTING THE SureServo SERVO SYSTEM APPENDIX B In This Appendix... Selecting the SureServo Servo System............B 2 The Selection Procedure......................................B 2 How many pulses
More informationMechanics Lab & Problem Sheet 2: Structures ( )
Mechanics Lab & Problem Sheet 2: Structures (2009-2010) Name (please print): P/1 Tutor (please print): Lab group Notes In the session you will be divided into small groups (about five per group). For the
More informationProduct Description. Further highlights. Outstanding features. 4 Bosch Rexroth Corporation Miniature Linear Modules R310A 2418 (2009.
4 Bosch Rexroth orporation Miniature Linear Modules R310A 2418 (2009.05) Product Description Outstanding features Rexroth Miniature Linear Modules are precise, ready-to-install linear motion systems that
More informationTINIUS OLSEN Testing Machine Co., Inc.
Interpretation of Stress-Strain Curves and Mechanical Properties of Materials Tinius Olsen has prepared this general introduction to the interpretation of stress-strain curves for the benefit of those
More informationConfigurations & Parts Identification
Suspension Series Configurations & Parts Identification Advancing the Practical Application of Suspension Technology Springfield, MO n (800) 654-8824 n (417) 862-5012 Fax (417) 862-2317 n www.hutchensindustries.com
More informationBall screw. Linear. Coupling cover. 1Positioning table of a structure with enhanced sealing property. 3 High corrosion resistance
Cleanroom Precision Positioning Table TC Ball screw TC EB Slide table inear Way Side cover Stainless sheet Motor bracket inear Coupling cover Pipe threads for suction connector Points ight weight, low
More informationIts modular concept allows to build up a ball valve for any degree of automation and any kind of application
Type 2657...59 DN 10 up to 80 mm; Plastic; 2/2 way dvantages/benefits ntegrated pilot valves, position feed-back and limit switches available Customized system solutions with Burkert valves & sensors With
More informationPoints. Precision Positioning Table TU. Variation. Major product specifications With flange
9 0 Precision Positioning Table Ball screw inear Points lide table with high accuracy and high rigidity in a single structure lide table Compact and slim type positioning table with an original U-shaped
More informationZF Maschinenantriebe GmbH Industrial Drives. Planetary gearboxes Economy Series for Servomotors
ZF Maschinenantriebe GmbH Industrial rives Planetary gearboxes Economy Series for Servomotors 2 ZF-uoplan 2K Two-speed Gearboxes ZF-Ecolift Elevator Gearboxes ZF-Servoplan G ompact Gearbox ZF-Tiratron
More informationA wide selection of pipe and orifice sizes is offered. Valves are available with threaded ports in brass and stainless steel.
Solenoid Valve Waterhammer-Free, 0- PSI /-Way; NPT - NPT; 0- PSI Advantages/Benefits Type 63 Waterhammer-free Low noise Zero differential pressure ompact design with high flow rates Low maintenance oil
More information210H-3 HA 289 HA H-3. f80 f160. f140. f125. f50. Type. Standard type. Adaptable fluid. Seal material. Phosphate ester fluid. Water in oil fluid
288 28 Type Nominal pressure Maximum allowable pressure roof test pressure Minimum operating pressure orking speed range orking temperature range (ambient/fluid temperature) Structure of cushioning Adaptable
More informationCompendium Screw Jacks
Compendium Screw Jacks Screw Jack Technology Overview of chapters Useful information Project planning Screw jacks Bevel gear boxes Lifting screw protective covers Couplings and connecting shafts Accessories
More informationSelecting the SureStep Stepping System...C 2
SELECTING THE SureStep STEPPING SYSTEM APPENDIX C In This Appendix... Selecting the SureStep Stepping System.............C 2 The Selection Procedure..............................C 2 How many pulses from
More informationCooling Water Flow Regulator
Temperature controlled, indirectly and directly actuated diaphragm valves / seat valves Port size G 3/8 to G DN 0 to DN 0 ontinuous regulation High accuracy No auxiliary energy required Technical data
More informationSelection table for guided systems (crank driven)
Selection table for guided systems (crank driven) One mass shaker brute-force system One mass shaker natural frequency system Two mass shaker fast-runner system with reaction force-compensation Single
More informationCheck-Q-meter. Table of contents. Features. Functions. RE 27551/ /10 Replaces: Type FD
Check-Q-meter RE /0.0 /0 Replaces: 09.9 Type FD Nominal size... Series ax. Operating pressure 0 bar ax. Flow 0 l/min K9/ Table of contents Contents Page Features Functions Ordering details Symbols Functional
More informationOin Figure 2. The peak gun launch pressure is 43,000 psi, which results in MAR
'N GUN LAUNCH DYNAMICS OF THE NAVY S-INCH GUIDED PROJECTILE George Fotieo Martin Marietta Aerospace Orlando, Florida ABSTRACT,The design and qualification of the Navy 5-inch guided projectile components
More informationThe basic dynamic load rating C is a statistical number and it is based on 90% of the bearings surviving 50 km of travel carrying the full load.
Technical data Load Rating & Life Under normal conditions, the linear rail system can be damaged by metal fatigue as the result of repeated stress. The repeated stress causes flaking of the raceways and
More informationR310EN 2403 ( ) The Drive & Control Company
Feed Modules VKK R310EN 2403 (2008.09) The Drive & Control Company Linear Motion and Assembly Technologies Ball Rail Systems Roller Rail Systems Linear Bushings and Shafts Ball Screw Drives Linear Motion
More informationShafts. Fig.(4.1) Dr. Salah Gasim Ahmed YIC 1
Shafts. Power transmission shafting Continuous mechanical power is usually transmitted along and etween rotating shafts. The transfer etween shafts is accomplished y gears, elts, chains or other similar
More informationU.S. Patents 6,290,217 6,244,579
CR CR Series Overview U.S. Patents 6,90,7 6,,579 For the best in vibration isolation capabilities, choose Enidine s. Smaller than traditional wire ropes, these unique isolators provide cost-effective,
More information3.2 HP 114 HIGH PERFORMANCE BUTTERFLY VALVE HP 114 TECHNICAL DATA
ug type butterfly valve in double-eccentric construction. Reliable sealing even with extreme temperature and pressure conditions. TECHNICA DATA Nominal diameter: 0 larger nominal diameter on request Face-to-face:
More informationSingle Socket and Horizontal Metering
idwest lectric Products Single Socket and Horizontal etering G pproved Single Socket etering G pproved pplication Information idwest s Single Socket etering products are designed for residential use. They
More information( ) Calculating the Nominal Life. Nominal Life Equation for an LM Guide Using Balls. Nominal Life Equation for the Oil-Free LM Guide L = ( C L =
Point of Selection The service life of an LM Guide is subject to variations even under the same operational conditions. Therefore, it is necessary to use the nominal life defi ned below as a reference
More informationHigh Pressure Ball Valves
High Pressure all Valves 0,, 0, 0,000 psi (0 bar),000 psi (0 bar) 0,000 psi ( bar) ITOK Group ITOK GmbH (Headquarter) Sprendlinger Landstr., 0 Offenbach am Main, Germany Tel.: + 00 ax: + 00 ITOK, Inc.
More informationHD 049 HD 069 HD 172 HD 319 HD 419 HD 619. Operating pressure up to 8700 psi Nominal flow rate up to gpm us
H i g h P re s s u re i l t e r K i t s H 049 H 069 H 172 H 319 H 419 H 619 Operating pressure up to 8700 psi Nominal flow rate up to 118.9 gpm 40.95-3us e s c r i p t i o n pplication In the high pressure
More informationSECTION 1 - WHAT IS A BTU METER? BTU's = Flow x ΔT Any ISTEC BTU Meter System consists of the following main components:
SECTION 1 - WHAT IS A BTU METER? ISTEC BTU Meters measure energy usage by multiplying flow rate and temperature difference. As the water (or other liquid) passes through these lines, the multi-wing turbine
More informationModel Selection 1. Process Valves. Air. Vacuum
Process Valves Model Selection For product specifications such as maximum operating pressure differentials and operating temperature ranges, refer to the relevent pages of each product. Air One-touch fittings
More informationDynamics Kinetics of a particle Section 4: TJW Force-mass-acceleration: Example 1
Section 4: TJW Force-mass-acceleration: Example 1 The beam and attached hoisting mechanism have a combined mass of 1200 kg with center of mass at G. If the inertial acceleration a of a point P on the hoisting
More information2/2-way ball valve with electric rotary actuator, ball valve in plastic, DN 10-50
/way ball valve with electric rotary actuator, ball valve in plastic, N 50 Suitable for aggressive media High flow rate value Actuator with adjustable limit switches Visual position indicator Type 0 can
More informationSimple Machines. Changes effort, displacement or direction and magnitude of a load 6 simple machines. Mechanical Advantage
Simple Machine Simple Machines Changes effort, displacement or direction and magnitude of a load 6 simple machines Lever Incline plane Wedge Screw Pulley Wheel and Axle Mechanical Advantage Ideal: IMA
More informationINSTALLATION INSTRUCTIONS ATV Plow Blade Part Number: (50 ), (54 ), or (60 ) Application: All Terrain Vehicles
INSTALLATION INSTRUCTIONS ATV Plow Blade Part Number: 78950 (50 ), 78954 (54 ), or 78960 (60 ) Application: All Terrain Vehicles Your safety, and the safety of others, is very important. To help you make
More informationA. B. C. D. E. v x. ΣF x
Q4.3 The graph to the right shows the velocity of an object as a function of time. Which of the graphs below best shows the net force versus time for this object? 0 v x t ΣF x ΣF x ΣF x ΣF x ΣF x 0 t 0
More informationGripper modules GM GMQ 12 - GMQ 32 & GMK 20 - GMK 32
Table of contents: GM Gripper modules GM GMQ - GMQ & GMK 0 - GMK Gripper modules GM GMQ Gripper actuator & gripper GM GMK 0 GMQ 0 Gripper actuator & gripper GMK/GMQ 0 GMK GMQ 0 Gripper actuator & gripper
More informationExam 2 October 17, 2013
Exam 2 Instructions: You have 60 minutes to complete this exam. This is a closed-book, closed-notes exam. You are allowed to use an approved calculator during the exam. Usage of mobile phones and other
More informationSteel Post Load Analysis
Steel Post Load Analysis Scope The steel posts in 73019022, 73019024, and 73019025, are considered to be traditional building products. According to the 2015 International Building Code, this type of product
More informationBulkhead Fitting Product Guide
1/2" TO 3" PV OMPRSSION FITTING * oes not come with bulkhead fitting MTRILS Robust PV Upper and Lower ody onstruction PV ell lass 12454 per STM 1784 Stainless Steel Wave Spring 17-7 PH Stainless Steel Fits
More informationA 954 C HD. Technical Description Hydraulic Excavator. Machine for Industrial Applications
Technical Description Hydraulic Excavator A 95 C HD litronic` Machine for Industrial Applications Operating Weight 165,800 170,0 lb Engine Output 36 hp (0 kw) Technical Data Engine Rating per ISO 99 0
More informationAir distribution systems. Adjustable induction outlet IN-V...
ir distribution systems djustable induction outlet IN-V... DS E 0. Construction and function Preliminary remarks In addition to its induction outlet with preset discharge direction ), KRNTZ KOMPONENTEN
More informationTable of Contents SC Series Features and Benefits
Table of Contents SC Series...................................................... -6 Features and Benefits.................................................................................. How To Order........................................................................................
More information3.1 HP 111 HIGH-PERFORMANCE BUTTERFLY VALVE HP 111 TECHNICAL DATA
HIGH-PERFORMANCE BUTTERFY VAVE HP 111 Wafer type butterfly valve in double-eccentric construction. Reliable sealing even with extreme temperature and pressure conditions. TECHNICA DATA Nominal diameter:
More informationMULTI-MOTION ACTUATORS SERIES , SERIES AIR/OIL TANDEM AND MULTI-POSITION
MULT-MOTON TUTOS SS 000-, SS 000- /OL M N MULTOSTON ombined Linear and otary Motions from a Single Output Shaft or Tool Plate NX: Series 000- Pages - to - Series 000- ir/oil Tandem Pages -8 to - Series
More informationEmerson Climate Technologies (India) Private Limited Karad Dhebewadi Road Karad INDIA
merson limate echnologies (ndia) rivate Limited MRR MDL merson limate echnologies (ndia) rivate Limited Karad Dhebewadi Road Karad - 415 110 D ote: ales compressor drawing number and compressor model name
More informationCalculating the Applied Load
The LM Guide is capable of receiving loads and moments in all directions that are generated due to the mounting orientation, alignment, gravity center position of a traveling object, thrust position and
More informationAA TM 3200 Thermal Sliding Doors
JNURY, 1-1 TM 30 Thermal Sliding oors FTURS 1 Features TM 30HP (High Performance) meets: M / WM / S 1 / I.S.2 / 0-0 W-PG-S TM 30IR (Hurricane Resistant) meets: STM 1/ 1, FLORI UILING O (F) TS 1/3 Small
More information