PN LINE. PN Line. PX Line. PA Line. PU Line PX LINE. PV Line PA LINE & TUBINGS PU LINE PV LINE. Brass Push-in fittings
|
|
|
- Darrell Dixon
- 5 years ago
- Views:
Transcription
1 I
2 NDEX PV LINE PX LINE PU LINE PA LINE & TUBINGS PN LINE Brass Push-in fittings Stainless Steel Push-in fittings Brass Standard fittings and Flexible Hoses Couplings and Multiple Connectors Function fittings PN Line PX Line PA Line PU Line PV Line 7_18 19_24 25_28 29_34 35_46
3 PN LINE PN LINE PN 11 PN 13 PN 14 PN 15 PN 17 PN 18 PN 20 PN 23 PN 25 PN 26 PN 27 PN 28 PN 29 PN 31 PN 32 PN 35 PN 37 PN 38 PN 39 PN 40 PN 43 PN 48 Technical remarks 8_9 10_13 PN 11 PN 13 PN 14 PN 15 PN 17 PN 18 PN 20 PN 23 PN 25 PN 26 PN 27 PN 28 PN 29 PN 31 PN 32 PN 35 PN 37 PN 38 PN 39 PN 40 PN 43 PN 48 13_15 15_17 7
4 PN LINE Body and Release Ring Tightness Ring Gripping collet Protection Ring O-Ring Brass UNI EN CW614N - UNI EN CW617N Nickel Plated Acetal Resin (POM) Stainless steel AISI 301 Acetal Resin (POM) NBR (FPM on request) ZOOM IN All our NPT threads are PTFE pre-applied. Identification mark for inch sizes. Identification mark for NPTF threads. THE PN LINE PN is C.MATIC highly performing, extremely compact push-in full metal fitting. Our PN fittings are ready for use as all threads are PTFE pre-applied and no tools are requested to guarantee tight and pressure resistant assemblies. The hose connection is made possible by the presence of a stainless steel gripper and by an O-ring inside of the fitting. To connect, simply push the tubing until it bottoms; the stainless steel teeth grip onto the tubing and holds it captive. The great advantage of our special PTFE coating on threads makes sure that the fitting can be used several times without peeling off. It is a full metal fitting and this makes of it the suitable fitting for the heaviest duty pneumatic applications. DATA SHEET Recommended tubings: PA 6, PA 11, PA 12, Polyethylene, Polyurethane (95 durometer or above) Acceptable tubing tolerances: +/-.003 Application fields: Pneumatic circuits. Working pressure: Depending on tubings used and always within: 0 psi 217 psi Vacuum rating: to 28 Hg Working temperature: -4 F 160 F 8
5 Threads Threads Specifications NPTF threads ANSI/ASME B NPTF pre-coated threads ANSI/ASME B UNF parallel threads with seal ANSI/ASME B Tightening Torque (lb-ft) /8" 1/4" 3/8" 1/2" Our tapered male straight connector is provided with an inner hex allowing for easy assembly when no space is available. PN LINE ASSEMBLY INSTRUCTIONS 1. Cut the tube square (by means of a tube cutter i.e. our PA 34) making sure that no burrs are left and that the tube is not oval. 2. Push the tubing until it bottoms. Tube release 3. While pressing on the release ring, pull out the tube from the fitting. 9
6 PN 11 Male Connector Tube OD D1 UNF D2 L1 L2 HEX1 HEX2 oz 11 1/ / /16 3/ ( 7 ) ( 5 ) ( 16.5 ) ( 7.93 ) ( 2.38 ) ( 2.5 ) 11 5/ / /8 3/ ( 9 ) ( 5 ) ( 19.5 ) ( 9.52 ) ( 2.38 ) ( 5 ) 11 1/ / /2 3/ ( 12 ) ( 5 ) ( 23 ) ( 12.7 ) ( 2.38 ) ( 8.5 ) Tube OD D1 NPTF D2 L1 L2 HEX1 HEX2 oz 11 1/8 1/8 1/8 1/ /16 3/ ( 7 ) ( 8.5 ) ( 18.5 ) ( 11.1 ) ( 2.38 ) ( 9.5 ) 11 5/32 1/8 5/32 1/ /16 1/8.317 ( 9 ) ( 8.5 ) ( 19 ) ( ) ( 3.17 ) ( 9 ) 11 5/32 1/4 5/32 1/ /16 1/8.705 ( 9 ) ( 13 ) ( 23.5 ) ( ) ( 3.17 ) ( 20 ) 11 1/4 1/8 1/4 1/ /2 5/ ( 12 ) ( 8.5 ) ( 21.5 ) ( 12.7 ) ( 4 ) ( 10 ) 11 1/4 1/4 1/4 1/ /16 5/ ( 12 ) ( 13 ) ( 24 ) ( ) ( 4 ) ( 18 ) 11 5/16 1/8 5/16 1/ /16 1/4.529 ( 14 ) ( 8.5 ) ( 26 ) ( ) ( 6.35 ) ( 15 ) 11 5/16 1/4 5/16 1/ /16 1/4.564 ( 14 ) ( 13 ) ( 25 ) ( ) ( 6.35 ) ( 16 ) 11 5/16 3/8 5/16 3/ /16 1/4.987 ( 14 ) ( 13 ) ( 24.5 ) ( ) ( 6.35 ) ( 28 ) 11 3/8 1/8 3/8 1/ /16 1/4.794 ( 16 ) ( 8.5 ) ( 27.5 ) ( ) ( 6.35 ) ( 22.5 ) 11 3/8 1/4 3/8 1/ /16 5/ ( 16 ) ( 13 ) ( 31 ) ( ) ( 8 ) ( 27 ) 11 3/8 3/8 3/8 3/ /16 5/ ( 16 ) ( 13 ) ( 24.5 ) ( ) ( 8 ) ( 25 ) 11 3/8 1/2 3/8 1/ /8 5/ ( 16 ) ( 17 ) ( 29.5 ) ( ) ( 8 ) ( 56 ) 11 1/2 1/4 1/2 1/ /16 5/ ( 19 ) ( 13 ) ( 33 ) ( ) ( 8 ) ( 35 ) 11 1/2 3/8 1/2 3/ /16 13/ ( 19 ) ( 13 ) ( 28.5 ) ( ) ( ) ( 27.5 ) 11 1/2 1/2 1/2 1/ /8 13/ ( 19 ) ( 17 ) ( 29.5 ) ( ) ( ) ( 46 ) PN 13 Female Connector Tube OD D1 NPTF D2 L1 L2 HEX 13 5/32 1/8 5/32 1/ / ( 9 ) ( 8.5 ) ( 24.5 ) ( ) ( 12 ) 13 1/4 1/8 1/4 1/ / ( 12 ) ( 8.5 ) ( 26.5 ) ( ) ( 14 ) 13 1/4 1/4 1/4 1/ / ( 12 ) ( 13 ) ( 31 ) ( ) ( 26.5 ) 13 5/16 1/8 5/16 1/ / ( 14 ) ( 8.5 ) ( 26.4 ) ( ) ( 20 ) 13 5/16 1/4 5/16 1/ / ( 14 ) ( 13 ) ( 31 ) ( ) ( 28.5 ) 13 3/8 1/4 3/8 1/ / ( 16 ) ( 13 ) ( 33 ) ( ) ( 33 ) 13 3/8 3/8 3/8 3/ / ( 16 ) ( 13 ) ( 33 ) ( ) ( 38 ) oz 10
7 PN 14 Male Elbow PN 15 Swivel Male Elbow Tube OD D1 NPTF D2 L1 L2 L3 HEX oz 14 5/32 1/8 5/32 1/ ( 9 ) ( 8.5 ) ( 15.5 ) ( 17 ) ( 8 ) ( 9 ) 14 1/4 1/8 1/4 1/ ( 12 ) ( 8.5 ) ( 16 ) ( 20 ) ( 10 ) ( 13 ) 14 1/4 1/4 1/4 1/ ( 12 ) ( 11 ) ( 20 ) ( 20 ) ( 10 ) ( 17 ) 14 5/16 1/8 5/16 1/ ( 14 ) ( 8.5 ) ( 17 ) ( 21.5 ) ( 12 ) ( 20.5 ) 14 5/16 1/4 5/16 1/ ( 14 ) ( 11 ) ( 21 ) ( 21.5 ) ( 12 ) ( 22.5 ) 14 3/8 1/4 3/8 1/ ( 16 ) ( 11 ) ( 22.5 ) ( 24 ) ( 14 ) ( 29.5 ) 14 3/8 3/8 3/8 3/ ( 16 ) ( 11 ) ( 22.5 ) ( 24 ) ( 14 ) ( 33.5 ) PN LINE Tube OD D1 UNF D2 L1 L2 L3 HEX oz 15 1/ / /8.282 ( 7 ) ( 5 ) ( 16.5 ) ( 14.5 ) ( 9.52 ) ( 8 ) 15 5/ / /8.353 ( 9 ) ( 5 ) ( 16.5 ) ( 17 ) ( 9.52 ) ( 10 ) Tube OD D1 NPTF D2 L1 L2 L3 HEX oz 15 1/8 1/8 1/8 1/ / ( 7 ) ( 8.5 ) ( 18.5 ) ( 14.5 ) ( ) ( 10.5 ) 15 5/32 1/8 5/32 1/ / ( 9 ) ( 8.5 ) ( 18.5 ) ( 17 ) ( ) ( 12.5 ) 15 5/32 1/4 5/32 1/ / ( 9 ) ( 13 ) ( 26 ) ( 19 ) ( ) ( 22.5 ) 15 1/4 1/8 1/4 1/ /2.688 ( 12 ) ( 8.5 ) ( 21 ) ( 21.5 ) ( 12.7 ) ( 19.5 ) 15 1/4 1/4 1/4 1/ / ( 12 ) ( 13 ) ( 26 ) ( 21.5 ) ( ) ( 25 ) 15 5/16 1/8 5/16 1/ /2.811 ( 14 ) ( 8.5 ) ( 21 ) ( 22 ) ( 12.7 ) ( 23 ) 15 5/16 1/4 5/16 1/ / ( 14 ) ( 13 ) ( 26 ) ( 22 ) ( ) ( 28.5 ) 15 5/16 3/8 5/16 3/ / ( 14 ) ( 13 ) ( 28.5 ) ( 22.5 ) ( ) ( 40 ) 15 3/8 1/8 3/8 1/ / ( 16 ) ( 8.5 ) ( 24 ) ( 25 ) ( ) ( 39 ) 15 3/8 1/4 3/8 1/ / ( 16 ) ( 13 ) ( 28.5 ) ( 25 ) ( ) ( 42 ) 15 3/8 3/8 3/8 3/ / ( 16 ) ( 13 ) ( 28.5 ) ( 25 ) ( ) ( 43 ) 15 3/8 1/2 3/8 1/ / ( 16 ) ( 17 ) ( 34 ) ( 25 ) ( ) ( 62 ) 15 1/2 1/4 1/2 1/ / ( 19 ) ( 13 ) ( 32 ) ( 27.5 ) ( ) ( 66.5 ) 15 1/2 3/8 1/2 3/ / ( 19 ) ( 13 ) ( 32 ) ( 27.5 ) ( ) ( 63 ) 15 1/2 1/2 1/2 1/ / ( 19 ) ( 17 ) ( 36.5 ) ( 27.5 ) ( ) ( 75.5 ) 11
8 PN 17 Swivel Female Elbow PN 18 Swivel fitting with banjo ring Tube OD D1 NPTF D2 L1 L2 L3 HEX oz 17 5/32 1/8 5/32 1/ / ( 9 ) ( 8.5 ) ( 19.5 ) ( 19 ) ( ) ( 21 ) 17 1/4 1/8 1/4 1/ / ( 12 ) ( 8.5 ) ( 19.5 ) ( 21.5 ) ( ) ( 23 ) 17 1/4 1/4 1/4 1/ / ( 12 ) ( 13 ) ( 23.5 ) ( 21.5 ) ( ) ( 32 ) 17 5/16 1/8 5/16 1/ / ( 14 ) ( 8.5 ) ( 19.5 ) ( 22 ) ( ) ( 26.5 ) 17 5/16 1/4 5/16 1/ / ( 14 ) ( 13 ) ( 23.5 ) ( 22 ) ( ) ( 35.5 ) 17 3/8 1/4 3/8 1/ / ( 16 ) ( 13 ) ( 25.5 ) ( 25 ) ( ) ( 44.5 ) 17 3/8 3/8 3/8 3/ / ( 16 ) ( 13 ) ( 25.5 ) ( 25 ) ( ) ( 49 ) Tube OD D1 NPTF D2 L1 L2 L3 L4 HEX1 HEX2 oz 18 5/32 1/8 5/32 1/ /16 1/ ( 9 ) ( 8.5 ) ( 20 ) ( 20 ) ( 30.5 ) ( ) ( 3.17 ) ( 28.5 ) 18 1/4 1/8 1/4 1/ /16 1/ ( 12 ) ( 8.5 ) ( 20 ) ( 22.5 ) ( 30.5 ) ( ) ( 3.17 ) ( 30 ) 18 1/4 1/4 1/4 1/ /16 3/ ( 12 ) ( 13 ) ( 26 ) ( 23.5 ) ( 37.5 ) ( ) ( 4.76 ) ( 49 ) 18 5/16 1/8 5/16 1/ /16 1/8 ( 14 ) ( 8.5 ) ( 20 ) ( 22.5 ) ( 30.5 ) ( ) ( 3.17 ) 18 5/16 1/4 5/16 1/ /16 3/16 ( 14 ) ( 13 ) ( 26 ) ( 24 ) ( 37.5 ) ( ) ( 4.76 ) 18 5/16 3/8 5/16 3/ /16 1/4 ( 14 ) ( 13 ) ( 28 ) ( 26 ) ( 41 ) ( ) ( 6.35 ) 18 3/8 1/4 3/8 1/ /16 3/ ( 16 ) ( 13 ) ( 26 ) ( 26 ) ( 37.5 ) ( ) ( 4.76 ) ( 52 ) 18 3/8 3/8 3/8 3/ /16 1/ ( 16 ) ( 13 ) ( 28 ) ( 28 ) ( 41 ) ( ) ( 6.35 ) ( 84 ) PN 20 Swivel Tee Tube OD D1 NPTF D2 L1 L2 L3 HEX oz 20 1/8 1/8 1/8 1/ / ( 7 ) ( 8.5 ) ( 18.5 ) ( 29 ) ( ) ( 19 ) 20 5/32 1/8 5/32 1/ /2.776 ( 9 ) ( 8.5 ) ( 21 ) ( 38 ) ( 12.7 ) ( 22 ) 20 5/32 1/4 5/32 1/ / ( 9 ) ( 13 ) ( 26 ) ( 38 ) ( ) ( 27.5 ) 20 1/4 1/8 1/4 1/ /2.917 ( 12 ) ( 8.5 ) ( 21 ) ( 43 ) ( 12.7 ) ( 26 ) 20 1/4 1/4 1/4 1/ / ( 12 ) ( 13 ) ( 26 ) ( 43 ) ( ) ( 30.5 ) 20 5/16 1/8 5/16 1/ / ( 14 ) ( 8.5 ) ( 21 ) ( 44 ) ( 12.7 ) ( 31.5 ) 20 5/16 1/4 5/16 1/ / ( 14 ) ( 13 ) ( 26 ) ( 44 ) ( ) ( 37 ) 20 3/8 1/4 3/8 1/ / ( 16 ) ( 13 ) ( 28.5 ) ( 50 ) ( ) ( 54 ) 20 3/8 3/8 3/8 3/ / ( 16 ) ( 13 ) ( 28.5 ) ( 50 ) ( ) ( 55 ) 20 1/2 3/8 1/2 3/ / ( 19 ) ( 13 ) ( 32 ) ( 55 ) ( ) ( 78 ) 20 1/2 1/2 1/2 1/ / ( 19 ) ( 17 ) ( 36.5 ) ( 55 ) ( ) ( 90 ) 12
9 PN 23 Swivel Male Run Tee Tube OD D1 NPTF D2 L1 L2 L3 L4 HEX oz 23 1/8 1/8 1/8 1/ / ( 7 ) ( 8.5 ) ( 18.5 ) ( 16.5 ) ( 37.5 ) ( ) ( 19.5 ) 23 5/32 1/8 5/32 1/ /2.811 ( 9 ) ( 8.5 ) ( 21 ) ( 19 ) ( 40 ) ( 12.7 ) ( 23 ) 23 5/32 1/4 5/32 1/ / ( 9 ) ( 13 ) ( 26 ) ( 19 ) ( 45 ) ( ) ( 28 ) 23 1/4 1/8 1/4 1/ /2.935 ( 12 ) ( 8.5 ) ( 21 ) ( 21.5 ) ( 42.5 ) ( 12.7 ) ( 26.5 ) 23 1/4 1/4 1/4 1/ / ( 12 ) ( 13 ) ( 26 ) ( 21.5 ) ( 47.5 ) ( ) ( 31 ) 23 5/16 1/8 5/16 1/ / ( 14 ) ( 8.5 ) ( 21 ) ( 22 ) ( 43 ) ( 12.7 ) ( 32 ) 23 5/16 1/4 5/16 1/ / ( 14 ) ( 13 ) ( 26 ) ( 22 ) ( 48 ) ( ) ( 37 ) 23 3/8 1/4 3/8 1/ / ( 16 ) ( 13 ) ( 28.5 ) ( 25 ) ( 53.5 ) ( ) ( 54 ) 23 3/8 3/8 3/8 3/ / ( 16 ) ( 13 ) ( 28.5 ) ( 25 ) ( 53.5 ) ( ) ( 55 ) 23 1/2 3/8 1/2 3/ / ( 19 ) ( 13 ) ( 32 ) ( 27.5 ) ( 59.5 ) ( ) ( 77.5 ) 23 1/2 1/2 1/2 1/ / ( 19 ) ( 17 ) ( 36.5 ) ( 27.5 ) ( 64 ) ( ) ( 89 ) PN LINE PN 25 Reducer Tube OD D1 D2 L1 oz 25 1/8 5/32 1/8 5/ ( 7 ) ( 29 ) ( 2.5 ) 25 5/32 1/4 5/32 1/ ( 9 ) ( 31 ) ( 7.5 ) 25 1/4 5/16 1/4 5/ ( 12 ) ( 33 ) ( 11.5 ) 25 1/4 3/8 1/4 3/ ( 12 ) ( 35 ) ( 13.5 ) 25 1/4 1/2 1/4 1/ ( 12 ) ( 35 ) ( 25 ) 25 5/16 3/8 5/16 3/ ( 14 ) ( 35 ) ( 15.5 ) 25 3/8 1/2 3/8 1/ ( 16 ) ( 36 ) ( 24.5 ) PN 26 Union Tube OD1 Tube OD1 D2 L1 oz 26 1/8 1/8 1/8 1/ ( 7 ) ( 22 ) ( 3 ) 26 5/32 5/32 5/32 5/ ( 9 ) ( 27 ) ( 7.5 ) 26 1/4 1/4 1/4 1/ ( 12 ) ( 33 ) ( 13.5 ) 26 5/16 5/16 5/16 5/ ( 14 ) ( 33 ) ( 18 ) 26 3/8 3/8 3/8 3/ ( 16 ) ( 37 ) ( 25 ) 26 1/2 1/2 1/2 1/ ( 19 ) ( 39 ) ( 40 ) 13
10 PN 27 Bulkhead union PN 28 Union Elbow Tube OD D1 L1 L2 HEX oz 27 1/8 1/8 1/8 M10x ( 22 ) ( 8 ) ( 14 ) ( 13.5 ) 27 5/32 5/32 5/32 M12x ( 27 ) ( 11 ) ( 16 ) ( 23 ) 27 1/4 1/4 1/4 M14x ( 33 ) ( 16 ) ( 18 ) ( 32.5 ) 27 5/16 5/16 5/16 M16x ( 33 ) ( 17 ) ( 20 ) ( 39 ) 27 3/8 3/8 3/8 M18x ( 37 ) ( 19 ) ( 22 ) ( 53 ) 27 1/2 1/2 1/2 M20x ( 39 ) ( 20 ) ( 24 ) ( 55 ) PN 29 Union Tee Tube OD D2 L1 oz 28 1/8 1/8 1/ ( 7 ) ( 15 ) ( 4.5 ) 28 5/32 5/32 5/ ( 9 ) ( 17 ) ( 9.5 ) 28 1/4 1/4 1/ ( 12 ) ( 20 ) ( 15.5 ) 28 5/16 5/16 5/ ( 14 ) ( 21.5 ) ( 23.5 ) 28 3/8 3/8 3/ ( 16 ) ( 24.5 ) ( 32 ) 28 1/2 1/2 1/ ( 19 ) ( 25.5 ) ( 51.5 ) PN 31 Simple Screw Tube OD D2 L1 L2 oz 29 1/8 1/8 1/ ( 7 ) ( 15 ) ( 30 ) ( 5.5 ) 29 5/32 5/32 5/ ( 9 ) ( 17 ) ( 34 ) ( 12.5 ) 29 1/4 1/4 1/ ( 12 ) ( 20 ) ( 40 ) ( 20.5 ) 29 5/16 5/16 5/ ( 14 ) ( 21.5 ) ( 43 ) ( 28 ) 29 3/8 3/8 3/ ( 16 ) ( 24.5 ) ( 49 ) ( 42 ) 29 1/2 1/2 1/ ( 19 ) ( 25.5 ) ( 51 ) ( 59 ) D1 BSP L1 L2 L3 HEX oz G1/ ( 5 ) ( 23 ) ( 27 ) ( 14 ) ( 14 ) G1/ ( 6.5) ( 26.5 ) ( 31.5 ) ( 17 ) ( 26.5 ) G3/ ( 7 ) ( 30 ) ( 36 ) ( 20 ) ( 45 ) 14
11 PN 32 Double Screw D1 BSP L1 L2 L3 HEX oz G1/ ( 5 ) ( 39.5 ) ( 42.5 ) ( 14 ) ( 20 ) G1/ ( 6.5 ) ( 45 ) ( 50 ) ( 17 ) ( 39.5 ) G3/ ( 7 ) ( 51.5 ) ( 57.5 ) ( 20 ) ( 61.5 ) PN LINE PN 35 Banjo Ring Tube OD D1 D2 D3 L1 L2 oz 35 5/32 1/8 5/ ( 10) ( 9 ) ( 14 ) ( 15 ) ( 20 ) ( 14 ) 35 1/4 1/8 1/ ( 10 ) ( 12 ) ( 14 ) ( 15 ) ( 22.5 ) ( 15.5 ) 35 1/4 1/4 1/ ( 13.2 ) ( 12 ) ( 17 ) ( 17 ) ( 23.5 ) 35 5/16 1/8 5/ ( 10 ) ( 14 ) ( 14 ) ( 15 ) ( 22.5 ) ( 19 ) 35 5/16 1/4 5/ ( 13.2) ( 14 ) ( 17 ) ( 17 ) ( 24 ) 35 5/16 3/8 5/ ( 17 ) ( 14 ) ( 21 ) ( 20 ) ( 26 ) 35 3/8 1/4 3/ ( 13.2 ) ( 16 ) ( 17 ) ( 17 ) ( 26 ) 35 3/8 3/8 3/ ( 17 ) ( 16 ) ( 21 ) ( 20 ) ( 28 ) ( 36 ) PN 37 Union Y Connector Tube OD D2 L1 L2 oz 37 1/8 1/8 1/ ( 7 ) ( 22 ) ( 7 ) ( 18 ) 37 5/32 5/32 5/ ( 9 ) ( 28.5 ) ( 9.5 ) ( 13.5 ) 37 1/4 1/4 1/ ( 12 ) ( 35 ) ( 12.5 ) ( 31 ) 37 5/16 5/16 5/ ( 14 ) ( 37.5 ) ( 14.5 ) ( 42 ) 15
12 PN 38 Stem adaptor D1 UNF D2 L1 L2 HEX oz 38 5/ / ( 5 ).984 ( 25 ) 5/16 ( 7.93 ).088 ( 2.5 ) D1 NPTF D2 L1 L2 HEX oz 38 5/32 1/8 1/8 5/ / ( 8.5 ) ( 28.5 ) ( ) ( 7 ) 38 5/32 1/4 1/4 5/ / ( 13 ) ( 33.5 ) ( ) ( 14 ) 38 1/4 1/8 1/8 1/ / ( 8.5 ) ( 30.5 ) ( ) ( 8.5 ) 38 1/4 1/4 1/4 1/ / ( 13 ) ( 35.5 ) ( ) ( 15 ) 38 5/16 1/8 1/8 5/ / ( 8.5 ) ( 32.5 ) ( ) ( 9 ) 38 5/16 1/4 1/4 5/ / ( 13 ) ( 37.5 ) ( ) ( 15.5 ) 38 3/8 1/4 1/4 3/ / ( 13 ) ( 39.5 ) ( ) ( 16.5 ) 38 3/8 3/8 3/8 3/ / ( 13 ) ( 40 ) ( ) ( 23 ) 38 1/2 3/8 3/8 1/ / ( 13 ) ( 43 ) ( ) ( 25.5 ) 38 1/2 1/2 1/2 1/ / ( 17 ) ( 48 ) ( ) ( 43 ) PN 39 Extention Piece D1 L1 oz 39 5/32 5/32 5/ ( 30 ) ( 2.5 ) 39 1/4 1/4 1/ ( 35 ) ( 5 ) 39 5/16 5/16 5/ ( 35 ) ( 7.5 ) 39 3/8 3/8 3/ ( 40 ) ( 8.5 ) 39 1/2 1/2 1/ ( 42 ) ( 14 ) PN 40 Plug D1 L1 oz 40 1/8 00 1/ ( 20 ) ( 1.3 ) 40 5/ / ( 25 ) ( 2.5 ) 40 1/4 00 1/ ( 30 ) ( 6.5 ) 40 5/ / ( 30 ) ( 12.5 ) 40 3/8 00 3/ ( 35 ) ( 20.5 ) 40 1/2 00 1/ ( 38 ) ( 42 ) 16
13 PN 43 Plug-in Elbow Tube OD D1 L1 L2 oz 43 5/ /32 5/ ( 25.5 ) ( 17 ) 43 1/4 00 1/4 1/ ( 29.5 ) ( 21.5 ) 43 5/ /16 5/ ( 29.5 ) ( 22 ) 43 3/8 00 3/8 3/ ( 33.5 ) ( 25 ) PN LINE PN 48 Press-in Cartridge Tube OD D1 L1 oz 48 5/ / ( 9 ) ( 11.5 ) 48 1/4 00 1/ ( 12 ) ( 13 ) 48 5/ / ( 14 ) ( 13.5 ) 48 3/8 00 3/ ( 16 ) ( 15.3 ) 48 1/2 00 1/ ( 20 ) ( 16.5 ) Pls always specify if body's material housing cartridges differs from plastics. Cartridges seat drilling plan Tube OD D1 D2 L1 5/ ( 9 ) ( 3 ) ( 11.5 ) 1/ ( 12 ) ( 5 ) ( 13 ) 5/ ( 14 ) ( 7 ) ( 13.5 ) 3/ ( 16 ) ( 9 ) ( 15.3 ) 1/ ( 20 ) ( 11 ) ( 16.5 ) 17
14 PX LINE PX 11 PX 15 PX 20 PX 25 PX 26 PX 28 PX 29 Technical remarks 20_21 22_23 PX 11 PX 15 PX 20 PX 25 PX 26 PX 28 PX 29 PX LINE
15 PX LINE Body Release ring Tightness ring Gripping collet Protection ring O-Ring Stainless steel AISI 316L Stainless steel AISI 316L Stainless steel AISI 316L Stainless steel AISI 301 Stainless steel AISI 316L FPM/FKM ZOOM IN Identification mark for inch sizes. Identification mark for NPTF threads. THE PX LINE PX is our new stainless steel fittings line. Suitable for all those applications where brass nickel-plated and acetal fittings are banned, the new AISI 316L fitting is conceived to withstand corrosive environments (substances), to channel aggressive fluids and to be used in the food, pharmaceutical and chemical industries. PX comes with FPM seals to guarantee the best performance at the highest temperatures. DATA SHEET Recommended tubings: PVDF, PTFE Acceptable tubing tolerances: +/-.003 Application fields: Food, chemical, pharmaceutical, oil and pakaging industry. Working pressure: Pressure varies depending on the tubing used and in any case it never has to exceed 217 psi. In case of application with fluids, pls follow instructions below: Constant pressure: Max pressure 217 psi Pulse pressure: Max pressure 145 psi Vacuum rating: to 28 Hg Working temperature: 4 F 302 F depending on the materials and tube diameters used. 20
16 Threads Threads Specifications NPTF threads ANSI/ASME B NPTF pre-coated threads ANSI/ASME B UNF parallel threads with seal ANSI/ASME B Tightening Torque (lb-ft) /8" 1/4" 3/8" 1/2" Our tapered male straight connector is provided with an inner hex allowing for easy assembly when no space is available. PX LINE ASSEMBLY INSTRUCTIONS 1. Cut the tube square (by means of a tube cutter i.e. our PA 34) making sure that no burrs are left and that the tube is not oval. 2. Push the tubing until it bottoms. Tube release 3. While pressing on the release ring, pull out the tube from the fitting. 21
17 PX 11 Male Connector Tube OD D1 NPTF D2 L1 L2 HEX 1 (mm) HEX2 oz 11 5/32 1/8 5/32 1/ /8 ( 9 ) ( 8.5 ) ( 19 ) ( 3.17 ) 11 1/4 1/8 1/4 1/ /32 ( 12 ) ( 8.5 ) ( 21.5 ) ( 4 ) 11 1/4 1/4 1/4 1/ /32 ( 12 ) ( 13 ) ( 24 ) ( 4 ) 11 5/16 1/4 5/16 1/ /4 ( 14 ) ( 13 ) ( 25 ) ( 6.35 ) 11 3/8 1/4 3/8 1/ /16 ( 16 ) ( 13 ) ( 31 ) ( 8 ) 11 3/8 3/8 3/8 3/ /16 ( 16 ) ( 13 ) ( 24.5 ) ( 8 ) 11 1/2 3/8 1/2 3/ /32 ( 19 ) ( 13 ) ( 28.5 ) ( ) 11 1/2 1/2 1/2 1/ , /32 ( 19 ) ( 17 ) ( 29.5 ) ( 10.31) PX 15 Swivel Male Elbow Tube OD D1 NPTF D2 L1 L2 L3 HEX (mm) oz 15 5/32 1/8 5/32 1/ ( 9 ) ( 8.5 ) ( 18.5 ) ( 17 ) 15 1/4 1/8 1/4 1/ ( 12 ) ( 8.5 ) ( 21 ) ( 21.5 ) 15 1/4 1/4 1/4 1/ ( 12 ) ( 13 ) ( 26 ) ( 21.5 ) 15 5/16 1/4 5/16 1/ ( 14 ) ( 13 ) ( 26 ) ( 22 ) 15 3/8 1/4 3/8 1/ ( 16 ) ( 13 ) ( 28.5 ) ( 25 ) 15 3/8 3/8 3/8 3/ ( 16 ) ( 13 ) ( 28.5 ) ( 25 ) 15 1/2 3/8 1/2 3/ ( 19 ) ( 13 ) ( 32 ) ( 27.5 ) 15 1/2 1/2 1/2 1/ ( 19 ) ( 17 ) ( 36.5 ) ( 27.5 ) PX 20 Swivel Tee Tube OD D1 NPTF D2 L1 L2 L 3 HEX (mm) oz 20 5/32 1/8 5/32 1/ ( 9 ) ( 8.5 ) ( 23 ) ( 34 ) 20 1/4 1/8 1/4 1/ ( 12 ) ( 8.5 ) ( 23 ) ( 41 ) 20 1/4 1/4 1/4 1/ ( 12 ) ( 13 ) ( 30.5 ) ( 41 ) 20 5/16 1/4 5/16 1/ ( 14 ) ( 13 ) ( 30.5 ) ( 42 ) 20 3/8 1/4 3/8 1/ ( 16 ) ( 13 ) ( 32 ) ( 46 ) 20 3/8 3/8 3/8 3/ ( 16 ) ( 13 ) ( 32 ) ( 46 ) 22
18 PX 25 Reducer Tube OD D1 D2 L1 oz 25 5/32 1/4 5/32 1/ ( 9 ) ( 31 ) 25 1/4 5/16 1/4 5/ ( 12 ) ( 34 ) 25 1/4 3/8 1/4 3/ ( 12 ) ( 34 ) 25 5/16 3/8 5/16 3/ ( 14 ) ( 36 ) PX 26 Union Tube OD1 Tube OD2 D2 L1 oz 26 5/32 5/32 5/32 5/ ( 9 ) ( 27 ) 26 1/4 1/4 1/4 1/ ( 12 ) ( 33 ) 26 5/16 5/16 5/16 5/ ( 14 ) ( 33 ) 26 3/8 3/8 3/8 3/ ( 16 ) ( 37 ) 26 1/2 1/2 1/2 1/ ( 19 ) ( 39 ) PX LINE PX 28 Union Elbow Tube OD D2 L1 oz 28 5/32 5/32 5/ ( 9 ) ( 17 ) 28 1/4 1/4 1/ ( 12 ) ( 20 ) 28 5/16 5/16 5/ ( 14 ) ( 21.5 ) 28 3/8 3/8 3/ ( 16 ) ( 24.5 ) 28 1/2 1/2 1/ ( 19 ) ( 26 ) PX 29 Union Tee Tube OD D2 L1 L2 oz 29 5/32 5/32 5/ ( 9 ) ( 17 ) ( 34 ) 29 1/4 1/4 1/ ( 12 ) ( 20 ) ( 40 ) 29 5/16 5/16 5/ ( 14 ) ( 21.5 ) ( 43 ) 29 3/8 3/8 3/ ( 16 ) ( 24.5 ) ( 49 ) 29 1/2 1/2 1/ ( 19 ) ( 26 ) ( 52 ) 23
19 PA LINE PA 14 PA 16 PA 17 PA 19 PA 34 PA 37 TUBING Technical remarks 26_26 27_28 PA 14 PA 16 PA 17 PA 19 PA 34 PA 37 TUBING PA LINE & TUBING
20 Body PA LINE 1 Brass UNI EN CW614N Nickel Plated 1 1 Threads Threads Specifications NPTF threads ANSI/ASME B NPTF pre-coated threads ANSI/ASME B UNF parallel threads with seal ANSI/ASME B Tightening Torque (lb-ft) /8" 1/4" 3/8" 1/2" THE PA LINE PA is our range of accessories, a complement line to the Push-in and the flow control fittings. All components are brass nickel-plated. DATA SHEET Max working pressure: 870 psi Application fields: Pneumatic, hydraulic, oleodynamic and hydropneumatic installations. 26
21 PA 14 Taper female-male reducing connector PA 16 Adaptor male-female, taper D1 NPTF D2 NPTF L1 L2 HEX oz / UNF ( 8.5 ) ( 15 ) ( 12 ) 14 1/4 1/8 1/4 1/ ( 13 ) ( 19 ) ( 14 ) ( 12.5 ) 14 3/8 1/8 3/8 1/ ( 13 ) ( 19 ) ( 18 ) 14 3/8 1/4 3/8 1/ ( 13 ) ( 19 ) ( 18 ) ( 18 ) 14 1/2 1/4 1/2 1/ ( 17 ) ( 24 ) ( 22 ) 14 1/2 3/8 1/2 3/ ( 17 ) ( 24 ) ( 22 ) PA 17 Adaptor male-female, parallel D1 NPTF D2 BSP L1 L2 HEX oz M UNF M5x ( 5 ) ( 12 ) ( 8 ) 16 1/8 1/8 1/8 G1/ ( 8.5 ) ( 19 ) ( 18 ) ( 12 ) 16 1/4 1/4 1/4 G1/ ( 13 ) ( 27 ) ( 18 ) ( 27 ) 16 3/8 3/8 3/8 G3/ ( 13 ) ( 27 ) ( 22 ) ( 39 ) 16 1/2 1/2 1/2 G1/ ( 17 ) ( 34 ) ( 27 ) ( 65.5 ) D1 NPTF D2 BSP L1 L2 HEX oz 17 1/8 1/8 1/8 G1/ ( 6 ) ( 18 ) ( 14 ) ( 12.5 ) 17 1/4 1/4 1/4 G1/ ( 8 ) ( 24 ) ( 17 ) ( 27 ) 17 3/8 3/8 3/8 G3/ ( 9 ) ( 25 ) ( 22 ) ( 39 ) 17 1/2 1/2 1/2 G1/ ( 10 ) ( 30 ) ( 24 ) ( 49.5 ) PA LINE & TUBING PA 19 Male plug D1 NPTF L1 L2 HEX oz /8 1/ ( 8.5 ) ( 12.5 ) ( 12 ) ( 6 ) /4 1/ ( 13 ) ( 18 ) ( 14 ) ( 14 ) /8 3/ ( 13 ) ( 18 ) ( 18 ) ( 24 ) /2 1/ ( 17 ) ( 23 ) ( 22 ) 27
22 PA 34 Hose Cutter PA 37 Spare Blades L Tube OD L oz from 1/8" to 1/2" ( 130 ) ( 99.5 ) from 1/2" to 1" ( 185 ) ( 293 ) Tube OD from 1/8" to 1/2" from 1/2" to 1" POLYAMIDE 12 FLEXIBLE TUBING Limited humidity absorption, great dimensional stability at high temperatures and good chemical resistance are the major features of the C.MATIC Polyamide 12, highly recommended for all standard industrial applications. Working temperature: -40 F to +212 F Vacuum rating: To 28 Hg Hardness: 64 Shore D Working Pressure: 4 to 1 Safety Factor Water absorption: 1% Diameter Tolerances: +/-.002 Pressure variation (%) in relation with temperature change 68 F 104 F 140 F 176 F 212 F 100% 85% 60% 40% 35% POLYURETHAN 95 DUROMETER FLEXIBLE TUBING C.MATIC ether based Polyurethan resists attack with moisture, humidity and fungus. It is highly abrasion and UV resistant. Its flexibility allows for assemblies in reduced spaces and for very narrow bending radius and makes of our Polyurethan 95 one of the most popular choices. Pressure variation (%) in relation with temperature change 68 F 86 F 104 F 122 F 140 F 100% 83% 72% 64% 47% Diameter Pressure at 75 F OD (in) ID (in) Bend Radius (in) Working pressure (psi) Bursting point (psi) colour 1/ colour 5/ colour 1/ colour 5/ colour 3/ colour 1/ Reel length: 100 feet. Colours available: Neutral (N), Blue (B) and Black (BK) on stock. Other colours available upon request. Working temperature: -40 F to +140 F. Vacuum rating: To 28 Hg Hardness: 95 Shore A Working Pressure: 3 to 1 Safety Factor Diameter Tolerances: +/-.003 Diameter Pressure at 75 F OD (in) ID (in) Bend Radius (in) Working pressure (psi) Bursting point (psi) colour 1/ / colour 5/32 3/32 3/ colour 1/ / colour 5/ / colour 3/ / colour 1/ / Reel length: 100 feet. Colours available: Neutral (N), Blue (B) and Black (BK) on stock. Other colours available upon request. PA11 and PTFE tubings available upon request. 28
23 PU LINE PU PU PU PU P 113 P 213 M U LT I P L E C O N N E C T O R Technical remarks 30_30 31_33 PU PU PU PU P 113 P 213 PU LINE
24 MULTI PROFILE QUICK COUPLER-INDUSTRIAL INTERCHANGE Body Balls O-Ring Spring Plug Brass UNI EN CW614N Nickel Plated Stainless steel AISI420 NBR Stainless steel AISI302 Hardened zinc plated steel Suitable with following plugs profiles Flow rate at 87 psi actual size MIL C4109 Profile 46 SCFM ARO 210 Profile 41 SCFM German Profile 56.5 SCFM ISO 6150 B Profile 45 SCFM Standard Swedisch Profile 45 SCFM Standard Italian Profile 38 SCFM MULTI PROFILE QUICK COUPLER C.MATIC single shut off coupler is Industrial Interchangeable and suitable with the most common European plugs profiles. DATA SHEET Application fields: Pneumatic equipment, Air tools Working pressure: psi Working temperature: - 4 F 158 F 30
25 PU 10 Male couplig D2 D1 NPTF D2 L1 L2 HEX oz / ( 23.5 ) ( 13 ) ( 55 ) ( 20 ) / ( 23.5 ) ( 13 ) ( 55 ) ( 20 ) / ( 23.5 ) ( 17 ) ( 58 ) ( 24 ) PU 10 Female couplig D1 NPTF D2 L1 L2 HEX oz / ( 23.5 ) ( 13 ) ( 59 ) ( 20 ) / ( 23.5 ) ( 13 ) ( 60 ) ( 20 ) / ( 23.5 ) ( 14 ) ( 63 ) ( 24 ) PU 10 Male plug D1 NPTF L1 HEX oz / ( 42 ) ( 14 ) / ( 42 ) ( 18 ) / ( 47 ) ( 22 ) PU 10 Female plug D1 NPTF L1 HEX oz / ( 40 ) ( 17 ) / ( 40 ) ( 22 ) / ( 44 ) ( 24 ) PU LINE 31
26 MULTIPLE CONNECTOR Multiple connector sheath Couplings support O-Ring Push-in fittings Light die cast alloy Aluminium NBR PN Push-In fittings Hoses Plug Plug cap Push-in fittings Push-in fittings system Socket Socket with cap MULTIPLE CONNECTOR The multiple connector is made of a fixed part to be connected to the control device of pneumatic powered machines and a mobile part to be assembled to the air distribution equipment. The big advantage offered by it, is that a bundle of hoses, varying from min 10 to max 20 tubings, can be rapidly and safely connected and disconnected. Our multiple connector is manufactured in such a way that the reverse assembly of the two parts is not possible. DATA SHEET Application fields: Pneumatic installations Recommended tubing: PA 6,PA 11, PA 12 Polyethylene, Polyurethane (95 durometer or above). Working pressure: psi Working temperature: - 4 F 158 F 32
27 P 113 Equipped with push-in fittings Tube OD Couplings n oz 113 5/ /4 10 5/32 1/ P 213 Equipped with push-in fittings Tube OD Couplings n oz 213 5/ /4 14 5/32 1/ Type A B C D E F G H L Ø P ( 93 ) ( 100 ) ( 45 ) ( 113 ) ( 103 ) ( 32 ) ( 28 ) ( 86 ) ( 36 ) ( 4.5 ) P ( 120 ) ( 100 ) ( 45 ) ( 140 ) ( 130 ) ( 32 ) ( 28 ) ( 113 ) ( 36 ) ( 4.5 ) Plug D Ø H B Ø F E L PU LINE Socket housing C F G C Socket A E 33
28 PV LINE PV 18 PV 41 PV 21 PV 23 PV 33 PV 26 PV 22 PV 27 PV 45 PV 46 PV 11-FE PV 11-BE Technical remarks 36_36 37_41 PV 18 PV 41 PV 21 PV 23 PV 33 PV 26 PV 22 PV 27 PV 45 PV 46 PV 11-FE PV 11-BE 42_45 PV LINE
29 FLOW CONTROLS Working pressure Working temperature from 0 up to 145 psi from 32 F up to 158 F /C = Meter Out /V = Meter In /B = Bidirectional IN IN IN CONTROLLED FLOW FREE FLOW CONTROLLED FLOW IN FREE FLOW CONTROLLED FLOW IN CONTROLLED FLOW IN FLOW CONTROLS C.MATIC flow controls can adjust the flow in pneumatic circuit or control the speed of a pneumatic cylinder. Depending on the flow control version used, the setting can be made both ways ( Bidirectional version), or just one way ( Meter Out or Meter In version). The One way version is particulary used to adjust the speed of pneumatic cylinders. DATA SHEET Recommended tubing: according to the fitting connected to the flow control. Application field: pneumatic installations fed with filtered, lubricated air. Threads Threads Specifications NPTF threads ANSI/ASME B NPTF pre-coated threads ANSI/ASME B UNF parallel threads with seal ANSI/ASME B Tightening Torque (lb-ft) /8" 1/4" 3/8" 1/2" PV18 PV41 Body Banjo ring O-Ring Brass UNI EN CW614N Nickel plated Brass UNI EN CW617N Nickel plated NBR PV21 Body Adjusting screw, nut and knob O-Ring Anodized aluminium Brass UNI EN CW614N Nickel plated NBR 36
30 PV 18 Flow control with swivel push-in fitting Tube OD D1 UNF L1 L2 L3 L4 HEX oz 18 5/ / ( 5 ).590 ( 15 ).708 ( 18 ) ( 32 ) 3/8 ( 9.52 ) Tube OD D1 NPTF L1 L2 L3 L4 HEX oz 18 5/32 1/8 5/32 1/ / ( 8.5 ) ( 22 ) ( 20 ) ( 43 ) ( ) ( 33 ) 18 1/4 1/8 1/4 1/ / ( 8.5 ) ( 22 ) ( 22 ) ( 43 ) ( ) ( 35 ) 18 1/4 1/4 1/4 1/ / ( 13 ) ( 27 ) ( 24 ) ( 51 ) ( ) ( 60 ) 18 5/16 1/8 5/16 1/ /16 ( 8.5 ) ( 22 ) ( 23 ) ( 43 ) ( ) 18 5/16 1/4 5/16 1/ / ( 13 ) ( 27 ) ( 24 ) ( 51 ) ( ) ( 61 ) 18 3/8 1/4 3/8 1/ / ( 13 ) ( 27 ) ( 26 ) ( 51 ) ( ) ( 65.5 ) Available as: /C = Meter Out /V = Meter In /B = Bidirectional PV 41 Flow control with swivel push-in fitting and handwheel adjustment Tube OD D1 UNF L1 L2 L3 41 5/ / ( 5 ).590 ( 15 ).708 ( 18 ) ( 43 ) 3/8 ( 9.52 ) Tube OD D1 NPTF L1 L2 L3 L4 HEX 41 5/32 1/8 5/32 1/ /16 ( 8.5 ) ( 22 ) ( 20 ) ( 54 ) ( ) 41 1/4 1/8 1/4 1/ / ( 8.5 ) ( 22 ) ( 22 ) ( 54 ) ( ) ( 38 ) 41 1/4 1/4 1/4 1/ / ( 13 ) ( 27 ) ( 24 ) ( 64 ) ( ) ( 66.5 ) 41 5/16 1/8 5/16 1/ /16 ( 8.5 ) ( 22 ) ( 23 ) ( 54 ) ( ) 41 5/16 1/4 5/16 1/ / ( 13 ) ( 27 ) ( 24 ) ( 64 ) ( ) ( 67 ) 41 3/8 1/4 3/8 1/ / ( 13 ) ( 27 ) ( 26 ) ( 64 ) ( ) ( 70 ) Available as: /C = Meter Out /V = Meter In /B = Bidirectional L4 HEX oz oz 37 PV LINE
31 PV 21 In Line Flow Control - Needle Valve D1 NPTF D2 D3 L1 L2 L3 L4 L5 S oz / ( 4.5 ) ( 12 ) ( 21 ) ( 56 ) ( 34 ) ( 24 ) ( 8 ) ( 16 ) ( 15 9 ( 49 ) / ( 6.5 ) ( 18 ) ( 30 ) ( 75 ) ( 50 ) ( 35 ) ( 12 ) ( 25 ) ( 22 9 ( 164 ) / ( 6.5 ) ( 18 ) ( 30 ) ( 75 ) ( 58 ) ( 40 ) ( 12 ) ( 25 ) ( 22 ) / ( 6.5 ) ( 22 ) ( 40 ) ( 92 ) ( 65 ) ( 50 ) ( 17 ) ( 30 ) ( 26 ) ( 301 ) HEX Available as: /U = One way /B = Bidirectional 38
32 CHECK VALVE Body Spring O-Ring Working temperature Cracking pressure Working pressure Brass UNI EN CW614N Nickel plated Stainless Steel AISI 302 NBR from 14 F up to 158 F. 2.9 psi from 29 psi up to 145 psi IN OUT IN OUT IN IN Meter Out Version CHECK VALVE DATA SHEET The flow is allowed only in one way (the arrow direction engraved on the body) and stopped in the reverse way. Recommended tubing according to the fitting connected to the valve. Application field: Pneumatic installation fed with filtered, lubricated air. PV 23 Check Valve PV 33 Straight connection with check valve / ( 38 ) ( 13 ) / ( 42 ) ( 16 ) / ( 52 ) ( 20 ) / ( 62 ) ( 24 ) Flow at 87 psi: PV : 33 SCFM PV : 57 SCFM PV : 86 SCFM PV : 124 SCFM D1 NPTF L1 HEX oz Tube OD D1 NPTF L1 L2 HEX oz 33 1/4 1/8 1/4 1/ ( 8.5 ) ( 28.5 ) ( 13 ) 33 1/4 1/4 1/4 1/ ( 13 ) ( 32 ) ( 14 ) Meter Out Version 39 PV LINE
33 SLIDE VALVE Body Sleeve O-Ring Working pressure Working temperature Brass UNI EN CW614N Chrome plated Anodized aluminium NBR From 0 up to 217 psi From 14 F up to158 F IN IN OFF ON VENTING OUT SLIDE VALVE The valve is used to section a pneumatic installation. Sliding the sleeve on the rod, both ON and OFF positions can be achieved. When the sleeve is against the rod hexagon, the flow goes in the arrow direction (ON); pushing it backwards the air supply is cut off and the installation is vented (OFF) DATA SHEET Recommended tubing: according to the fitting connected to the valve. Application field: pneumatic installation fed with filtered, lubricated air. PV 26 Slide valve D1 NPTF D2 L1 HEX oz 26 1/8 1/8 1/ ( 25 ) ( 48 ) ( 14 ) ( 50 ) 26 1/4 1/4 1/ ( 30 ) ( 58 ) ( 17 ) ( 85 ) 26 3/8 3/8 3/ ( 35 ) ( 68 ) ( 22 ) 26 1/2 1/2 1/ ( 40 ) ( 80 ) ( 27 ) 40
34 PV22 QUICK EXHAUST VALVE Body Lip ring Muffler Working pressure Working temperature Brass UNI EN CW614N Nickel plated PU Stainless Steel AISI316 from 29 psi up to 145 psi from 14 F up to 158 F PV27 Body Lip ring Gasket Working pressure Working temperature IN Brass UNI EN CW617N Nickel plated PU PA66 IN from 29 psi up to 145 psi from 14 F up to 158 F VENTING OUT CIRCUIT AIR FLOW PV 22 PV 27 OUT QUICK EXHAUST VALVE This valve can easily vent the air flowing in the circuit in case of an air supply failure. lf assembled on the cylinder port, it increases the cylinder speed. PV 22 In Line Quick Exhaust valve CIRCUIT AIR FLOW DATA SHEET Recommended tubing: according to the fitting connected to the valve. Application field: pneumatic installation fed with filtered, lubricated air. VENTING Tube OD D1 NPTF L1 L2 HEX oz 22 1/4 1/4 1/4 1/ ( 13 ) ( 53 ) ( 18 ) 22 3/8 3/8 3/8 3/ ( 13 ) ( 64.5 ) ( 27 ) 22 1/2 1/2 1/2 1/ ( 17 ) ( 76 ) ( 34 ) PV 27 Quick Exhaust valve D1 NPTF L1 L2 HEX oz 27 1/8 1/8 1/ ( 27 ) ( 42 ) ( 15 ) ( 95 ) 27 1/4 1/4 1/ ( 35 ) ( 54 ) ( 19 ) ( 158 ) 27 3/8 3/8 3/ ( 35 ) ( 55 ) ( 21 ) ( 160 ) 27 1/2 1/2 1/ ( 45 ) ( 72 ) ( 26 ) ( 325 ) 41 PV LINE
35 PILOT OPERATED CHECK VALVE Body Piston Spring O-Ring Working pressure Working temperature Brass UNI EN CW614N Nickel plated Stainless Steel AISI 304 Stainless Steel AISI 302 NBR-PU 29 psi to 145 psi 23 F to 158 F /U = One Way PILOT PRESSURE (P) B B A A A /B = Bidirectional PILOT PRESSURE (P) B B A A PILOT OPERATED CHECK VALVE The Pilot Operated check valve allows the flow only when a pilot signal is applied to the pilot port; if assembled in pair on the cylinder ports, in case of sudden pressure drops the pilot Opereted Check Valve immediatly stops the cylinder piston stroke. DATA SHEET Recommended tubing: according to the fitting connected to the pilot operated check valve. Application field: pneumatic circuits fed with filtered, lubricated air. 42
36 PV 45 Piloted Operated Check valve Tube OD D1 NPTF D2 L1 L2 L3 HEX oz 45 1/4 1/8 1/4 1/ ( 8.5 ) ( 17.5 ) ( 43 ) ( 13 ) 45 1/4 1/4 1/4 1/ ( 13 ) ( 23.5 ) ( 50 ) ( 17 ) 45 3/8 3/8 3/8 3/8 1/ ( 13 ) ( 25 ) ( 56.5 ) ( 20 ) 45 1/2 1/2 1/2 1/2 1/ ( 17 ) ( 31 ) ( 67.5 ) ( 25 ) Available as: /U = One way /B = Bidirectional 43 PV LINE
37 PNEUMATIC SWITCH Pneumatic switch Spring O-Ring Working pressure Working temperature Flow rate at 87 psi Brass UNI EN CW614N Nickel plated Stainless Steel AISI 302 NBR 0 psi to 217 psi 14 F to 158 F PV 46 1/4 1/8: 21.5 SCFM PV 46 1/4 1/4: 30 SCFM 2/2 ON OFF 3/2 ON OFF VENTING IN IN OUT IN OUT IN PNEUMATIC SWITCH The PV 46 is a pneumatic switch. It is available in a 2/2 and 3/2-way version. The goal of the 2/2 way switch is to cut off the flow in the circuit whenever needed by simply operating the lever. The 3/2 way valve cuts off the flow and vents to atmosphere the terminal part of the circuit DATA SHEET Recommended tubing: according to the fitting connected to the pressure control. Application field: pneumatic circuits fed with filtered, lubricated air. PV 46 Pneumatic switch Tube OD D1 NPTF L1 L2 L3 HEX1 HEX2 oz 46 1/4 1/8 1/4 1/ ( 8.5 ) ( 17 ) ( 55 ) ( 14 ) ( 15 ) 46 1/4 1/4 1/4 1/ ( 13 ) ( 22.5 ) ( 62 ) ( 17 ) ( 15 ) 2 WAYS 3 WAYS 44
38 PV11-FE MUFFLER Body Muffler Working pressure Brass UNI EN CW614N Nickel plated Stainless Steel AISI psi to 174 psi Working temperature 14 F to 158 F PV11-BE Brass UNI EN CW614N Sintered bronze 0 psi to 174 psi 14 F to 158 F Noise level at 87 psi Type 1/8 1/4 3/8 1/2 PV11 -FE 74 db 72 db 88 db 90 db PV11 -BE 75 db 81 db 82 db 85 db Filtration threshold Type PV11 -FE µm PV11 -BE 35 µm PV 11-FE Air muffler with stainless steel wire D1 NPTF L1 L2 HEX oz FE 1/ ( 6 ) ( 15 ) ( 13 ) FE 1/ ( 11 ) ( 22 ) ( 16 ) FE 3/ ( 11 ) ( 23 ) ( 19 ) FE 1/ ( 13 ) ( 25 ) ( 24 ) PV 11-BE Sintered bronze air muffler D1 NPTF L1 L2 HEX oz BE 1/ ( 6 ) ( 29 ) ( 13 ) BE 1/ ( 11 ) ( 36 ) ( 16 ) BE 3/ ( 11 ) ( 43 ) ( 19 ) BE 1/ ( 13 ) ( 49 ) ( 24 ) 45 PV LINE
Nickel-Plated Brass Push-In Fittings - NPTF/INCH
/INCH Tube Connections: External /8, 5/32, /4, 5/6, 3/8, /2 Thread Connections 0-32 UNF, /8, /4, 3/8, /2 Reusable thread seal, PTFE seal ring (Teflon ) - Pro-Fit Standard - Camozzi s all metal fittings
Connection Solutions for Industrial Fluids
PRODUT GUIDE Parker Legris connectic products are available from MARYLAND METRIS P.O. Box Owings Mills, MD 1 USA ph: ()35-30 ()3-130 fx: ()35-312 ()2-9329 email: sales@mdmetric.com web: http://mdmetric.com
Inch Size Uni One-touch Fittings. Applicable Tubing. Tubing material. Specifications. Fluid Note 3)
Courtesy of C/Flodyne/ydradyne otion Control ydraulic Pneumatic Electrical echanical (00) 2-50 www.cmafh.com Guide Chuck Suitable for use with nylon and urethane. arge retaining force. The chuck provides
ED 701 General Industry Pressure Transmitter
ED 701 General Industry Pressure Transmitter Standard industrial process connections Complete range of electrical connections 4... 20 ma and Voltage outputs Accuracy: 0.1%, 0.2% and 0.4% FS Quick response
Universal type Port size AS13 1F-M3. M3 x 0.5 M5 x 0.8 AS23 1F-01 AS23 1F-02 AS33 1F-02 AS33 1F-03 AS43 1F-04 R 1/8 R 1/4 R 1/4 R 3/8 R 1/2
Minimizes installation time and cost Reduces the mounting height and enables compact machinery design. Effective area is larger than the former model. Tube swivels 0 Universal type permits 0 piping swivel.
Body (Black) O-ring Stud. Effective when piping in a confined space. The body and the threaded portion can rotate (For positioning to some extent).
Antistatic One-touch Fittings Tubing: Metric Size/Connection Thread: M, Rc, G, NPT, NPTF Series KA RoS One-touch fitting with antistatic prevention. One-touch IN/OUT connection. Possible to use from vacuum
Cartridge Valves Technical Information. Quick reference
Quick reference Contents CPF0... 8. CP600-5... 8. CP60-5... 8. 066 handle kit... 8.5 MP06... 8.6 MP... 8.6 X05-FD0 Traction manifold... 8.9 X05-FD6 Traction manifold... 8.0 X05-FD0 Traction manifold...
Its modular concept allows to build up a ball valve for any degree of automation and any kind of application
Type 2657...59 DN 10 up to 80 mm; Plastic; 2/2 way dvantages/benefits ntegrated pilot valves, position feed-back and limit switches available Customized system solutions with Burkert valves & sensors With
Body (Black) O-ring. Effective when piping in a confined space. The body and the threaded portion can rotate (For positioning to some extent).
Antistatic One-touch Fittings ubing: etric Size/Connection hread:, Rc, G, NP, NPF Series RoS One-touch fitting with antistatic prevention. One-touch IN/OU connection. Possible to use from vacuum ( 0 kpa.
DN 1/4" to 4" Male, Female BSP - 10 C C Max Pressure : 30 Bars (up to DN1") Specifications : Anti blow-out stem PTFE packing Full bore
Size : Ends : Min Temperature : Max Temperature : DN 1/4" to 4" Male, Female BSP - 10 C + 120 C Max Pressure : 30 Bars (up to DN1") Specifications : Anti blow-out stem PTFE packing Full bore Materials
DN 1/4" to 4" Male, Female BSP - 10 C C Max Pressure : 40 Bars Specifications : Anti blow-out stem PTFE packing Full bore.
Size : Ends : Min Temperature : Max Temperature : DN 1/4" to 4" Male, Female BSP - 10 C + 120 C Max Pressure : 40 Bars Specifications : Anti blow-out stem PTFE packing Full bore Materials : Brass Page
ø6, ø10, ø15, ø20, ø25, ø32, ø40, ø50, ø63 How to Order Switch rail Nil Standard stroke Refer to page 12 for standard stroke.
Magnetically Coupled Rodless Cylinder: Direct Mount ype Series ø, ø, ø, ø, ø, ø, ø, ø0, ø Direct mount type mm mm mm mm mm mm mm 0 0 mm mm 00 MB Piping type Both sides piping type Centralized piping type
Flow rates to 750 l/min
FP Maximum pressure 0 bar Flow rates to 70 l/min Technical data Filter housing (Materials) ead: Cast iron (chemical heat treatment) ousing: Steel (chemical heat treatment) Bypass valve: AISI L (FP 00-0)
Size : Ends : Min Temperature : Max Temperature : Materials : Brass
Size : Ends : Min Temperature : Max Temperature : DN 1/2" to 1 Free nut BSP, male or female - 10 C + 120 C Max Pressure : 25 Bars Specifications : Before or after water meter PTFE packing With free nut
IBV Series Z Alloy Steel Inverted Bucket Vertical Steam Trap
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
IBV Series C Carbon Steel Inverted Bucket Vertical Steam Trap
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
Flow rates to 750 l/min
FP Maximum pressure 0 bar Flow rates to 70 l/min Technical data Filter housing (Materials) ead: Cast iron (chemical heat treatment) ousing: Steel (chemical heat treatment) Bypass valve: AISI L (FP 0-0)
5. DRIVE 1. SAFETY 2. PREPARATION 3. FRAME 4. TRANSMISSION 6. ROW UNIT 7. OPTIONAL EQUIPMENT
TABLE OF CONTENTS 1. SAFETY 2. PREPARATION 3. FRAME 4. TRANSMISSION 5. DRIVE 6. ROW UNIT 7. OPTIONAL EQUIPMENT DRIVE Standard Turbofan 540, 450 & 1000 RPM with PTO Drive Your Monosem planter will be equipped
Direct-operated 2/2-way solenoid valves Type EV210B
Data sheet Direct-operated 2/2-way solenoid valves Type EV20B EV20B covers a wide range of direct-operated 2/2-way solenoid valves for universal use. EV20B is a very robust valve program with high performance
AIR PREPARATION. ELECTRONICALLY CONTROLLED PRESSURE REGULATING VALVE (PROPORTIONAL PRESSURE REGULATING VALVE) SERIES control
AIR PREPARATION ELECTRONICALLY CONTROLLED PRESSRE REGLATING ALE (PROPORTIONAL PRESSRE REGLATING ALE) SERIES control Description Abb. Port size Recommended Type Data Sheet No. flow (l/min)* airfit tecno
A wide selection of pipe and orifice sizes is offered. Valves are available with threaded ports in brass and stainless steel.
Solenoid Valve Waterhammer-Free, 0- PSI /-Way; NPT - NPT; 0- PSI Advantages/Benefits Type 63 Waterhammer-free Low noise Zero differential pressure ompact design with high flow rates Low maintenance oil
ATEX/IECEx RTD temperature probe
Page 1/8 ATEX/IECEx RTD temperature probe with connecting cable acc. to DIN EN 60751 For temperatures from -100 to +600 C As single, double, or triple RTD temperature probe In two-wire, three-wire, or
Size : Ends : Min Temperature : Max Temperature : Materials : Brass
Size : Ends : Min Temperature : Max Temperature : DN 1/2" to 1 Free nut BSP, male or female - 10 C + 120 C Max Pressure : 20 Bars Specifications : Before or after water meter PTFE packing With free nut
Pneumatic Universal. Actuator MOTORIZED VALVES USE TECHNICAL FEATURES OF THE ACTUATOR. Data sheet
Data sheet. - 8 USE The motorized valve is specifically used for the interception and regulation of fluids in: systems using alternative energy industrial systems in general using hot and cold fluids automation
Bettis RGS F-Series. Quarter-Turn Spring-Return (SR) and Double-Acting (DA) Pneumatic Actuators. Product Data Sheet RGS Rev.
Bettis RGS F-Series Quarter-Turn Spring-Return (SR) and Double-Acting (DA) Pneumatic Actuators Output Torques to 500,000 in-lb (56,492 N m) Ductile Iron or Stainless-Steel Construction Temperatures from
Made in Italy HOSE REELS CATALOGUE TECHNOLOGY FOR FLUIDYNAMICS. No. E14/A1
Made in Italy HOSE REELS CATALOGUE TECHNOLOGY FOR FLUIDYNAMICS No. E14/A1 The complete range of our products is presented in the specific catalogues: HOSE REELS CATALOGUE No. E14/A2 HOSE REELS CATALOGUE
VOLUMEC. Valve Position Indicator 5
VOLUMEC Valve Position Indicator 5 2 KRACHT CORP. 8600 S Wilkinson Way Unit A Perrysburg, OH 43551 USA P +1 419 874 1000 F +1 419 874 1006 flowmeters@krachtcorp.com www.krachtcorp.com VOLUMEC Valve Position
Maximum pressure 420 bar Flow rate to 152 l/min. 560 bar. 140 l/min. Flow rate l/min FMM 050 1/2 1,50 3/4 1,00. Δp bar 0,50 0,00 FHA 051 1,50 1,00
FMM 00 Maximum pressure 0 bar Flow rate to l/min FHA 0 Maximum pressure 60 bar Flow rate to 0 l/min Technical data FMM 00 Filter housing (Materials) Head: Cast iron (chemical heat treatment) Housing: Steel
Part /Assy Parts List. Production Order. Badge, Perkins/Sabre M215C. Description
Badge, Perkins/Sabre M215C Part /Assy 5242 S000000 0002 2 X X 33213 BADGE, HEADER TANK, PERKINS/SABRE M21 S000000 1 P Badge, manifold, Perkins/Sabre(34314) Part /Assy 6696 S000000 0001 1 X X 34314 BADGE,
Temperature Measurement
Temperature Measurement 157 12 Precise and reliable measurements even in aggressive liquids all probes are encapsulated with PTFE for maximum chemical resistance. PRODUCT TIPS Page 161: 143 PT100 Temperature
Serie B2.1. Flanged ductile iron ball valve. made in. Application fields. Shut-off valves E U R O P E. 18
erie B. Flanged ductile iron ball valve BRanDOni made in E U R O P E Application fields WATER CONdITIONING GA EATING INdUTRY FIRE FIGTING www.brandoni.it erie B. eries B. valves are shut-off ball valves
Cooling Water Flow Regulator
Temperature controlled, indirectly and directly actuated diaphragm valves / seat valves Port size G 3/8 to G DN 0 to DN 0 ontinuous regulation High accuracy No auxiliary energy required Technical data
Check-Q-meter. Table of contents. Features. Functions. RE 27551/ /10 Replaces: Type FD
Check-Q-meter RE /0.0 /0 Replaces: 09.9 Type FD Nominal size... Series ax. Operating pressure 0 bar ax. Flow 0 l/min K9/ Table of contents Contents Page Features Functions Ordering details Symbols Functional
HEAVY DUTY SWING-OUT VALVE
ISO 900 REGISTERED COMPANY Akron Brass Company. 20 All rights reserved. No portion of this can be reproduced without the express written consent of Akron Brass Company. We will not be responsible for:
Pressure Transmitter ED 701
Pressure Transmitter ED 701 Hygienic and industrial process connections Zero setting function Accuracy < 0.1% FS Quick response time < 25 ms High long-term stability Excellent repeatability Active compensation
Direct-operated 2/2-way compact solenoid valves Type EV210A
Data sheet Direct-operated 2/2-way compact solenoid valves Type EV210A EV210A covers a wide range of small, directoperated 2/2-way solenoid valves for use in industrial machinery. The compact design together
AIR BREATHER FILTERS. Temperature from -25 to +100 C
IR BRETHER FILTERS The comprehensive series of breather filters makes it possible to meet all market demands. Metal and plastic styles suitable for use on mobile equipment are available. The function of
Chemistry Instrumental Analysis Lecture 31. Chem 4631
Chemistry 4631 Instrumental Analysis Lecture 31 High Performance Liquid Chromatography (HPLC) High Performance Liquid Chromatography (HPLC) High Performance Liquid Chromatography (HPLC) Solvent Delivery
Amphenol C 091 A/B/D. Circular Connectors. Amphenol-Tuchel Electronics GmbH
Amphenol C 091 A/B/D Circular Connectors Amphenol-Tuchel Electronics GmbH General information These connectors are designed and produced in conformity with the low-voltage directive (/3/EWG) respectively
CV3000 Series. Characterized Insert Control Valves
CV3000 Series Characterized Insert Control Valves The CV3000 Series is a v-type control valve for precise control allowing high pressure drop capability with straight-through flow and bubble-tight shut
HEAVY DUTY SWING-OUT VALVE
ISO 900 REGISTERED COMPANY HEAVY DUTY SWING-OUT VALVE 52 53 23 5 2 2 3 28 39 NOT USED WITH SZ HANDLE 2 NOT USED WITH SZ HANDLE 5 2 3 7 9 9 Premier Farnell Corporation. 20 All rights reserved. No portion
Rotary modules.
Rotary modules www.comoso.com www.comoso.com Rotary modules ROTARY MODULES Series Size Page Rotary modules RM swivel unit 156 RM 08 160 RM 10 162 RM 12 164 RM 15 168 RM 21 172 RM rotor 176 RM 50 180 RM
Flow Meter FVone-NP-CA. FVone-NP-CA 11 (Plug-in type) (Screw-in type) Recommended for: DN 20 DN 80 Required accessory: Cable type 31.
FVone-NP- 00/ (Push-in type) Recommended for: DN and bigger Required accessory: Threaded installation bush able type Optional accessory: PTFE sealing ring Locking set FVone-NP- 0/0 (Screw-in type) Recommended
5/2-5/3 SPOOL VALVES MULTIFUNCTION air operated or solenoid air operated with subbase ISO 5599/1 sizes 1, 2 and 3
/ - / SPOOL VALVES MULTIFUNCTION air operated or solenoid air operated with subbase ISO 99/ sizes, and Series Fluids air or inert gas, filtered, lubricated or not Operating pressure Pilot pressure Ambient
PR CYCLONE SECONDARY SHUTOFF
EN PR CYCLONE SECONDARY SHUTOFF ORIGINAL INSTRUCTIONS CYCLONE SECONDARY SHUTOFF PR530 CYCLONE SECONDARY SHUTOFF PR330 CYCLONE SECONDARY SHUTOFF PR200-250 CYCLONE SECONDARY SHUTOFF PR150 TECHNICAL DATA
Antistatic One-touch Fittings. Packing. Can be used for a wide range of pressures from low vacuum up to a pressure of 1.0MPa.
Antistatic One-touch Fittings Series KA One-touch loading and unloading Possible to use in vacuum (ax. 0kPa) Can be used in copper-free application Flame resistance (UL- standard, V-0) Surface resistance
Connector~Tech Providing Harsh Environment Connector
Connector~Tech www.connectortech.com.au Providing Harsh Environment Connector SOLUTIONS Tajimi TC18 series connectors are water-pro up to 30 meters in depth. Economical and highly reliable construction
/2" Heavy Duty Swing-Out
Premier Farnell Corporation. 0 All rights reserved. No portion of this can be reproduced without the express written consent of Premier Farnell Corporation. ISO 900 REGISTERED COMPANY We will not be responsible
Solenoid valves 2/2-way direct-operated type EV210A
MAKING MODERN LIVING POSSIBLE Data sheet Solenoid valves 2/2-way direct-operated type EV210A EV210A covers a wide range of small, direct-operated 2/2-way solenoid valves for use in industrial machinery.
M O D U L E - 3A Model A10V0 Piston Pump Manual A10V0 PUMP. Features
T E C H N I C A L I N F O R M A T I O N M A N U A L F O R T H E A 1 0 V 0 V A R I A B L E D I S P L A C E M E N T P U M P S A10V0 PUMP Features High Efficiency through load sensing (= fuel savings) Maximum
Size : Ends : Min Temperature : Max Temperature : Materials : Brass
Size : Ends : Min Temperature : Max Temperature : DN 1/2" to 2 Free nut BSP, male or female - 10 C + 120 C Max Pressure : 20 Bars up to DN1 1/2, 16 bars over Specifications : Before or after water meter
Cam Roller Guides. The Drive and Control Company. Service Automation. Electric Drives and Controls. Linear Motion and Assembly Technologies
Industrial Hydraulics Electric Drives and Controls Linear Motion and Assembly Technologies Pneumatics Service Automation Mobile Hydraulics Cam Roller Guides The Drive and Control Company Linear Motion
Conversion Kit for: 7620 and 7820 Swing-Out Valves ft-lbs ft-lbs 8835/ ft-lbs
ISO 900 REGISTERED COMPANY HEAVY DUTY SWING-OUT VALVE 52 53 23 5 2 2 3 28 39 NOT USED WITH SZ HANDLE 2 NOT USED WITH SZ HANDLE 5 2 3 7 9 9 Premier Farnell Corporation. 20 All rights reserved. No portion
The FLUX F 430 with mechanical seal
The FLUX F 0 with mechanical seal Flexible coupling between motor and pump The pump must be used with many varying liquids, consequently the smallest residual left within the pump is unacceptable. You
Zero-point clamping. Changeover in seconds! SAFE. patented collet lock
Zero-point clamping Changeover in seconds! SAFE patented collet lock Zero-point clamping since 1995 AG Company headquarters in Dübendorf Switzerland AG Werkzeug- und Spanntechnik Im Schossacher 17 CH-8600
MADILL MBT GRAPPLE RETURN TO INDEX
MADILL MBT GRAPPLE RETURN TO INDEX MBT CONTROL VALVE Additional Parts Breakdown for: - Outrigger Sections - Rotate Section - End Plate E 00- page Valve section Basic element without additional functions
Rotary Joints. Series DP
Rotary Joints Series DP Rotary Joints Series DP DP rotary joints are suitable for: hot and cold water modified design -00 for thermal oil Small Series also for hydraulic oil and compressed air high speeds
air and solenoid air operated 5/2-5/3 ISO 5599/01 - Size 2
Series 4/PH MULTIFUNCTION SPOOL VALV air and solenoid air /-/ ISO 99/0 - Size ports / positions SPCIFICATIONS FLUID : or neutral gas, filtered, lubricated or not PRSSUR : 0,90 to + bar (can be used with
SECTION 1 - WHAT IS A BTU METER? BTU's = Flow x ΔT Any ISTEC BTU Meter System consists of the following main components:
SECTION 1 - WHAT IS A BTU METER? ISTEC BTU Meters measure energy usage by multiplying flow rate and temperature difference. As the water (or other liquid) passes through these lines, the multi-wing turbine
Rodless cylinders Series 1600
Rodless cylinders Series 00 Basic version 0.Ø.stroke.0.M Max. stroke mt.) AL AI RA RB AF TC AM L LA+stroke AH TD AE TA RV Possibility of a single feed cylinder head AI AP AB AC AD TD TE TB AG RT Left head
KM-1600SWH KM-1600SRH KM-1600SWH3 KM-1600SRH3
NO. ISSUED: REVISED: 71193 OCT. 2, 2001 JAN. 27, 2003 HOSHIZAKI STACKABLE CRESCENT CUBER MODELS KM-1600SWH KM-1600SRH KM-1600SWH3 KM-1600SRH3 PARTS LIST KM-1600SWH L-0 June, 2001 M-0 Feb., 2002 M-1 Feb.,
Flow rates to 475 l/min
FMP Maximum pressure 0 bar Flow rates to 7 l/min Technical data PRSSUR FILTR Filter housing (Materials) ead: Cast iron (chemical heat treatment) ousing: Steel (chemical heat treatment) Bypass valve: Brass
Free Mount Cylinder Double Acting, Double Rod. ø6, ø10, ø16, ø20, ø25, ø32. How to Order. Action. D Double acting. Standard stroke (mm)
ouble Acting, ouble Rod eries CUW ø, ø, ø1, ø, ø2, ø How to Order CUW With auto switch CUW MBW Built-in magnet ouble rod 1 2 mm mm 1 mm mm 2 mm mm Action ouble acting Number of auto switches Nil 2 pcs.
Metal oil filler and air breather filler caps. Bayonet connection. Reservoir holes. TA46 B (Materials)
Metal oil filler and air Series T 46 4 5 6 4 ayonet connection Ø 46 7 8 46 Reservoir holes T46 (Materials) M5 - Cover: Chrome Plated Steel - Filter element: Impregnated paper Polyurethane 64-6 - Flange:
Series Shrink Boot Adapters. Series Shrink Boot, EMI/RFI, Strain Relief. Series Shrink Boot, EMI/RFI, Shield Sock
Product Selection Guide How For a complete Table of Contents please see the last page of this book Series 310 - Shrink Boot Adapters The adapters in this section are designed to accommodate lipped-type
Ex-Floodlight PXLED. (Ex-Zone 1, 2, 21 and 22)
Ex-Floodlight PXLED (Ex-Zone 1, 2, 21 and 22) Lighting under harsh conditions The new modular LED floodlight series PXLED is suited for nearly every kind of lighting task in hazardous areas, including
AIR BREATHER FILTERS. Temperature from -25 C to +100 C
IR RETHER FILTERS The comprehensive series of breather filters makes it possible to meet all market demands. Metal and plastic styles suitable for use on mobile equipment are available. The function of
Type M4 - SON - SO - MS
9. REV. Type M - SON - SO - MS Aircaps Tank venting and water excluding aircaps. For installation on service tank air pipes. Inerted void spaces and ballast tanks In order to maintain inert gas pressure
BASE. Rotary limit switch. OptiOnS. FEAtuRES. CERtiFiCAtiOnS
Rotary limit switch BASE Rotary limit switch used to control and measure the movement of industrial machines. Its compact size make it suitable for use in narrow spaces. FEAtuRES It consists of a gear
hard anodized aluminum extrusion die cast aluminium acetalic resin nickel plated steel die cast aluminium nitrile rubber stainless steel 3 Version
YR Pneumatic actuators for process automation Pneumatic connections configuration: NMUR interface V/VE Top pinion: V/VE Holes for sensor box connection: V/VE ottom holes for connecting valves: SO Single
Pressure Measurement. Transmitters for basic requirements SITRANS P MPS (submersible sensor) Transmitter for hydrostatic level 2/27
Overview Siemens AG 011 Function s are for measuring the liquid levels in wells, tanks, channels and dams. Diaphragm p Sensor U const. U + (brown) I EM I -1 (blue) 0, U B s are submersible sensors for
Flow rates to 590 l/min
LM 400-40 - 4 Maximum pressure bar Flow rates to 590 l/min Technical data housing (Materials) ead: nodized luminium ousing: nodized luminium Manifolds: Steel - Painted black ypass valve: Steel -way ball
S E G N A L F E IP P
9 8 PIPE FLANGES an excellence in engineering www.jbj.co.uk/ portflanges.html SAE standard, and 6, series flanges for screw or weld connection. Available for straight connection, fixed or swivel elbow
E 094 E 103 E 143. Tank top mounting Connection up to G1 Nominal flow rate up to 135 l/min e
R e t u r n F i l t e rs E 094 E 103 E 143 Tank top mounting Connection up to G1 Nominal flow rate up to 135 l/min 20.30-5e D e s c r i p t i o n Application In the return line circuits of hydraulic systems.
Flow rates to 485 l/min
FB Maximum pressure 0 bar Flow rates to 8 l/min Technical data Filter housing (Materials) ead: Cast iron (chemical heat treatment) ousing: Steel (chemical heat treatment) Bypass valve: Steel Check valve:
Series P0 Electronic Metering Pump. Specification Sheet and Assembly Details Manual No : 1934, 1843 Rev. : C, D Rev. Date : 6/01, 10/2015
INJECTION CHECK VALVE COUPLING NUT DISCHARGE TUBING 4 FUNCTION VALVE SPACER, E.P.U PUMP HEAD RETURN LINE (PRESSURE RELIEF) METERING PUMP HOUSING STROKE KNOB SUCTION FITTING SUCTION TUBING WEIGHT POWER
xanik API 6D Trunnion Ball Valves
API 6D Trunnion Ball Valves BV - XANIK SIDE ENTRY TRUNNION BALL VALVES table of contents BALL VALVES INDEX BV - XANIK SIDE ENTRY TRUNION BALL VALVES BV - 3 XANIK BALL VALVE DESIGN FEATURES BV - 4 thru
compact ejector, Series ECS with release valve with silencer with non-return valve, With filter vacuum switch: electronic 1x PNP and 1x analog
with release valve with silencer with non-return valve, With filter vacuum switch: electronic x PNP and x analog Ambient temperature min./max. +0 C / +0 C Medium temperature min./max. +0 C / + C Working
Edition 3 September Air Angle Wrench and Nut Runner. QA6 and QA8 Series. Parts Information. Save These Instructions
660072 Edition 3 September 2007 Air Angle Wrench and Nut Runner QA6 and QA8 Series Parts Information Save These Instructions Module Exploded Diagram 7 5 9 7 2 9 50 3 8 3 38 39 8 9 20 2 33 22 23 3 2 3 37
Thermal-Magnetic Circuit Breaker 2210-S2..
Thermal-Magnetic Circuit Breaker -S.. Description One, two and three pole thermal-magnetic circuit breakers with trip-free mechanism and toggle actuation (S-type TM CBE to EN 60934/IEC 934). Designed for
Pressure transmitters for industrial applications MBS 32 and MBS 33
Data sheet Pressure transmitters for industrial applications MBS 32 and MBS 33 The standard pressure transmitters MBS 32 and MBS 33 are designed for use in almost all industrial applications, and offer
High Pressure fi lters. FMP 039 series. Maximum pressure up to 110 bar - Flow rate up to 80 l/min. High Pressure fi lters
High Pressure fi lters FMP 09 series Maximum pressure up to 0 bar Flow rate up to 80 l/min 7 High Pressure fi lters FILTER SIZING The correct filter sizing have to be based on the variable pressure drop
Thermal-Magnetic Circuit Breaker 2210-S2..
Thermal-Magnetic Circuit Breaker -S.. Description One, two and three pole thermal-magnetic circuit breakers with trip free mechanism and toggle actuation (S-type TM CBE to EN 6094/IEC 94). Designed for
1.2 Z 014-A LUG TYPE BUTTERFLY VALVE Z 014-A TECHNICAL DATA:
TECNICA DATA: ug type butterfly valve with threaded holes. This type enables the one-sided lugging of pipes. Nominal diameter: Face-to-face: EN Series (DIN T ) ISO Series API 0 Table BS Series NF E -0.
Viega PureFlow Press Zero Lead Fittings with Attached Sleeves For Use with Viega PureFlow PEX Tubing. Potable Water. Residential Fire Sprinkler.
Viega PureFlow Press Zero Lead Fittings with Attached Sleeves For Use with Viega PureFlow PEX Tubing Project: Engineer: Contractor: Submitted By: Potable Water Residential Fire Sprinkler Other 1 of 18
G-FIRE FLANGE ADAPTERS
G-FIRE FLANGE ADAPTERS 21 G-FIRE FLANGE ADAPTERS Pictorial Table of Contents MATERIAL SPECIFICATIONS Issue 03, 04, 07 Cert No. 570, 669, 673 For detailed Listing and Approval information see pages 101-10
M/60210/M Miniature rotary actuators
M/6020/M Miniature rotary actuators Double acting - Magnetic piston - Ø 2 and 20 mm Smooth operation with zero backlash Lightweight ompact envelope dimensions Integral magnets for positional feedback TEHNIL
DM70 Hand-Held Dewpoint Meter for Spot-Checking Applications
DM70 Hand-Held Dewpoint Meter for Spot-Checking Applications The Vaisala DRYCAP Hand-Held Dewpoint Meter DM70 offers accurate and fast measurement for industrial dewpoint applications, such as compressed
Thermal-Magnetic Circuit Breaker 2210-S2...
Description One, two and three pole thermal-magnetic circuit breakers with trip free mechanism and toggle actuation (S-type TM CBE to EN 6094/IEC 94). Designed for panel or plug-in mounting. Available
Thermal-Magnetic Circuit Breaker 2210-S2...
Thermal-Magnetic Circuit Breaker 0-S... Description One, two and three pole thermal-magnetic circuit breakers with trip free mechanism and toggle actuation (S-type TM CBE to EN 60934/IEC 934). Designed
Amphenol. Amphenol-Tuchel Electronics GmbH. Circular Connectors C 091 A/B/D Series
Amphenol Amphenol-Tuchel Electronics GmbH Circular Connectors C 09 A/B/D Series The Company Amphenol-Tuchel Electronics GmbH is a member of the USA based Amphenol Corporation. With our own global presence
Thermal-Magnetic Circuit Breaker 2210-S2..
Thermal-Magnetic Circuit Breaker -S.. Description One, two and three pole thermal-magnetic circuit breakers with trip free mechanism and toggle actuation (S-type TM CBE to EN 60934/IEC 934). Designed for
Vane Type Rotary Actuators Series Variations
Vane Type Rotary Actuators Series Variations Vane Type Exterior CRB Series 0,, 0,, CRBU Series 0,, 0,, CRB Series, 6, 80, Has a compact body with exterior dimensions that do not change regardless of the
High Pressure fi lters. FHA 051 series. Maximum working pressure up to 56 MPa (560 bar) - Flow rate up to 140 l/min. High Pressure fi lters
High Pressure fi lters FHA 0 series Maximum working pressure up to 6 MPa (60 bar) Flow rate up to 0 l/min 99 High Pressure fi lters Introduction FILTER SIZG DEX CALCULATION CORRECTIVE FACTOR Page Introduction
Element description. Multipass test in compliance ISO Contaminant ISO MTD. A - Microfibre
Style FZ Stainless Steel Pressure filter Technical data element Style In-Line filter: FZ 00-0 FZP 0 FZ 0 FZP 6 FZX 0 Manifold mounting: FZ 0 FZM 0 Max. working pressure: 700 bar Max. working pressure:
THE ANSWER TO PROBLEMS OF: CORROSION, ABRASION, GRANULATED MATERIALS, POWDERS, SLUDGE, GAS ETC.
P PINC VLVE Mod. S pag. Mod. S pag. Mod. S pag. Mod. SD pag. Mod. S pag. Mod. S pag. 0 Mod. S pag. Mod. S pag. Mod. S pag. Mod. S0 pag. Mod. S pag. 0 Mod. S pag. Mod. S pag. Mod. S pag. Mod. S pag. TE
barmesapumps.com SELF-PRIMING CENTRIFUGAL TRASH PUMP SPECIFICATIONS Series: SH8-U Suction: 8" Discharge: 8" Spherical solids handling: 3"
SELF-PRIMING CENTRIFUGAL TRASH PUMP Series: SH-U Suction: " Discharge: " Spherical solids handling: 3" SIZE BEARING - PUMP END " x " NPT, lbs., female flange. Open single ball, radial load. LIQUID TEMPERATURE
SINGLE IMPELLER CENTRIFUGAL ELECTRIC PUMPS in cast iron
Cast iron self-priming electric pumps. APPLICATIONS Pressure boosting domestic plants Small-scale irrigation Moving non-aggressive liquids for civil and industrial use Washing plants Washing vehicles CMA-B-C-D
2.9. Namur Valves 2.9. page 175. Namur 1/4 also called Namur 1 in accordance to VDI / VDE Namur 1/2 also called Namur 2.
2.9 page 175 Namur 1/4 also called Namur 1 in accordance to VDI / VDE 3845. Namur 1/2 also called Namur 2. 2.9 Namur Valves + Selected models are available for low temperature application. Temperature-range:
Flow rates to 485 l/min
FB Maximum pressure 0 bar Flow rates to 8 l/min Technical data Filter housing (Materials) ead: Cast iron (chemical heat treatment) ousing: Steel (chemical heat treatment) Bypass valve: Steel Check valve: