Contents. Microfluidics - Jens Ducrée Physics: Laminar and Turbulent Flow 1
|
|
- Emma Rice
- 6 years ago
- Views:
Transcription
1 Contents 1. Introduction 2. Fluids 3. Physics of Microfluidic Systems 4. Microfabrication Technologies 5. Flow Control 6. Micropumps 7. Sensors 8. Ink-Jet Technology 9. Liquid Handling 10.Microarrays 11.Microreactors 12.Analytical Chips 13.Particle-Laden Fluids a. Measurement Techniques b. Fundamentals of Biotechnology c. High-Throughput Screening Microfluidics - Jens Ducrée Physics: Laminar and Turbulent Flow 1
2 3. Physics of Microfluidic Systems 1. Navier-Stokes Equations 2. Laminar and Turbulent Flow 3. Fluid Dynamics 4. Fluid Networks 5. Energy Transport 6. Interfacial Surface Tension 7. Electrokinetics Microfluidics - Jens Ducrée Physics: Laminar and Turbulent Flow 2
3 3.2. Laminar and Turbulent Flow 1. Critical Reynolds Number 2. Shear-Driven Laminar Flow 3. Couette Flow 4. Laminar PDF through a Tube 5. Laminar PDF through a Gap 6. Irrotational Flow 7. Centrifugal-Force Driven Flow 8. Effects in Laminar Flows 9. Turbulent Flows Microfluidics - Jens Ducrée Physics: Laminar and Turbulent Flow 3
4 Three types of flow conditions Laminar Low flow velocities Smooth sliding of adjacent layers Field of velocity vectors constant in time Turbulent Curling of field lines Mixing between adjacent layers Unpredictable" development of field of velocity vectors Flow patterns increasingly turbulent towards high velocities Sometimes laminar flow preserved up to higher velocities Periodic flow 3rd flow regime Surface waves Acoustic waves Critical Reynolds Number All three flow types solutions of NS-equation Microfluidics - Jens Ducrée Physics: Laminar and Turbulent Flow 4
5 Perturbation Analysis Transition from laminar to turbulent flow regime Mathematical perturbation analysis Prediction whether velocity distribution belongs to distinct flow regime Ansatz Known solution of NS-equation (guessed or measured) Superimposing small perturbation Product of - Amplitude - Oscillatory factor - Exponential term Microfluidics - Jens Ducrée Physics: Laminar and Turbulent Flow 5
6 Perturbation Analysis Properties Locally varying amplitude A and constant for given problem Insertion of perturbed solution in NS as initial velocity field Result: First order equations of and Sign of indicates decay of perturbation into v 0 Microfluidics - Jens Ducrée Physics: Laminar and Turbulent Flow 6
7 Critical Reynolds Number Condition = 0 defines critical Reynolds number Re* Re < Re * Perturbations damped in time Re > Re* Exponential growth of perturbations in time Perturbation theory not valid Unpredictable behavior of velocity field Transition point Re = Re* Flow oscillates between two flow regimes As Re increases further, turbulent character of flow increases Microfluidics - Jens Ducrée Physics: Laminar and Turbulent Flow 7
8 Critical Reynolds Number Re* ranges between 1 and 100,000 Re* depends on Material properties (density, viscosity) Boundary conditions Critical velocity Microdevice l = 100 µm v* = 25 m s -1 Hardly reached in microdevices Re* geometries Sphere: 2320 Flow parallel to plate: Re * = 500,000 Microfluidics - Jens Ducrée Physics: Laminar and Turbulent Flow 8
9 3.2. Laminar Flow Microfluidics - Jens Ducrée Physics: Laminar and Turbulent Flow 9
10 Critical Reynolds Number Transition point also depends on Initial velocity field Experimental environment Domain Re < Re* No survival of initial turbulences Domain Re > Re* Laminar flow still possible under certain conditions Turbulences hampered by - Smooth walls - Smooth endings at orifices Laminar conditions up to Re = 100,000 Re > 100,000 - Thermal motion of molecules sufficient to trigger transition to turbulence Microfluidics - Jens Ducrée Physics: Laminar and Turbulent Flow 10
11 Shift of Re* in MF Systems In MF-systems Channel diameter 100 µm Flow velocity v = 10 mm s -1 Flow rate Av = 6 µl min -1 Re ~ 1 << Re * ~ 2300 Always laminar flow in MF-systems? Departure of Reynolds theory in microworld Much higher surface-to-volume ratios Higher sensitivity to surface roughness Reliable results only with smooth surfaces and stabilized pumping Some results indicate early departure from laminar flow regime < Re * < 900 or 200 < Re * < 700 Avoiding artificially induced nucleation of turbulence - Smooth walls - Steady pumping Microfluidics - Jens Ducrée Physics: Laminar and Turbulent Flow 11
12 3.2. Laminar and Turbulent Flow 1. Critical Reynolds Number 2. Shear-Driven Laminar Flow 3. Couette Flow 4. Laminar PDF through Tube 5. Laminar PDF through Gap 6. Irrotational Flow 7. Centrifugal-Force Driven Flow 8. Effects in Laminar Flows 9. Turbulent Flows Microfluidics - Jens Ducrée Physics: Laminar and Turbulent Flow 12
13 Shear-Driven Laminar Flow Flow imposed on fluid by mere shear forces Viscous fluid sandwiched between two plates Wall at x = 0 at rest Wall at x = d moving at speed v 0 = const. in z-direction Viscous force density Stationary flow Microfluidics - Jens Ducrée Physics: Laminar and Turbulent Flow 13
14 Shear-Driven Laminar Flow Boundary conditions Linear flow profile Microfluidics - Jens Ducrée Physics: Laminar and Turbulent Flow 14
15 Shear-Driven Laminar Flow Microfluidics - Jens Ducrée Physics: Laminar and Turbulent Flow 15
16 Prandtl Boundary Layer d increases until Re > Re* Turbulent regime Laminar regime restricted to Tiny layer < d near moving body "Prandtl layer" Diffusion-limited mass and heat transfer Decisive impact on mass and heat exchange in macrosystems Estimate for thickness by energy analysis Viscous work Spent when body traveling at v 0 covers distance of its own length l Microfluidics - Jens Ducrée Physics: Laminar and Turbulent Flow 16
17 Prandtl Boundary Layer Setting adjacent fluid into motion requires kinetic energy Assuming linear flow profile within Prandtl layer Setting equal kinetic energy and viscous work yields Typical MF-values: l = 1cm, d = 100 µm and Re = 1 1 cm >> d Fully developed Prandtl layer therefore not found in MF systems Attention - Re increases with speed of flow Microfluidics - Jens Ducrée Physics: Laminar and Turbulent Flow 17
18 3.2. Laminar and Turbulent Flow 1. Critical Reynolds Number 2. Shear-Driven Laminar Flow 3. Couette Flow 4. Laminar PDF through Tube 5. Laminar PDF through Gap 6. Irrotational Flow 7. Centrifugal-Force Driven Flow 8. Effects in Laminar Flows 9. Turbulent Flows Microfluidics - Jens Ducrée Physics: Laminar and Turbulent Flow 18
19 Couette Flow Azimuthal symmetry Purely azimuthal fluid motion Cylindrical coordinates (r,, z) Velocity field v(r) Pressure distribution p Symmetry reduces NS-equations and continuity equation to Microfluidics - Jens Ducrée Physics: Laminar and Turbulent Flow 19
20 Azimuthal symmetry Purely azimuthal fluid motion Cylindrical coordinates (r,, z) Velocity field v(r) Ansatz Couette Flow Solution small ~ r Microfluidics - Jens Ducrée Physics: Laminar and Turbulent Flow 20
21 3.2. Laminar and Turbulent Flow 1. Critical Reynolds Number 2. Shear-Driven Laminar Flow 3. Couette Flow 4. Laminar PDF through Tube 5. Laminar PDF through Gap 6. Irrotational Flow 7. Centrifugal-Force Driven Flow 8. Effects in Laminar Flows 9. Turbulent Flows Microfluidics - Jens Ducrée Physics: Laminar and Turbulent Flow 21
22 Laminar PDF through Tube Pressure-driven flow Important phenomenon in nature E.g., transport of nutrients in plants and animals by heart Law of Hagen-Poisseuille Pressure drop Throughput Symmetry Parabolic flow profile Cylindrical symmetry Microfluidics - Jens Ducrée Physics: Laminar and Turbulent Flow 22
23 Laminar PDF through Tube Pressure forces Viscous forces Relationship for stationary flow (dv z /dt = 0) F p = F Microfluidics - Jens Ducrée Physics: Laminar and Turbulent Flow 23
24 Laminar PDF through Tube Integration Extension of auxiliary cylinder of radius r to tube radius r 0 Flow velocity profile Microfluidics - Jens Ducrée Physics: Laminar and Turbulent Flow 24
25 Laminar PDF through Tube Maximum velocity (in center at r = 0) Average velocity Microfluidics - Jens Ducrée Physics: Laminar and Turbulent Flow 25
26 Flow Rate Volumetric flow I V determined by integration of v z (r) da over r 0 Law of Hagen-Poiseuille I V scales with r 4 Average velocity Alternative expression for Reynolds number Microfluidics - Jens Ducrée Physics: Laminar and Turbulent Flow 26
27 Throughput I V ~ r 4 = A 2 Hagen-Poiseuille A 0 /4 A 0 I 0,V ~ A 0 2 I V ~ 4 (A 0 / 4) 2 = ¼ I 0V I V ~ N (A 0 / N) 2 = (1/N) I 0V Microfluidics - Jens Ducrée Physics: Laminar and Turbulent Flow 27
28 Hydraulic Diameter Based on law of Hagen-Poiseuille for cylindrical geometry PDF through duct with non-circular cross-section Equivalent hydraulic diameter Microfluidics - Jens Ducrée Physics: Laminar and Turbulent Flow 28
29 Hydraulic Diameter Round tube Square tube Edge length Annular geometry Microfluidics - Jens Ducrée Physics: Laminar and Turbulent Flow 29
30 3.2. Laminar and Turbulent Flow 1. Critical Reynolds Number 2. Shear-Driven Laminar Flow 3. Couette Flow 4. Laminar PDF through Tube 5. Laminar PDF through Gap 6. Irrotational Flow 7. Centrifugal-Force Driven Flow 8. Effects in Laminar Flows 9. Turbulent Flows Microfluidics - Jens Ducrée Physics: Laminar and Turbulent Flow 30
31 Laminar PDF through Gap Pressure-driven flow No (external) shear or volume forces Parallel plates Laminar regime Pressure gradient antiparallel to direction of flow No-slip conditions Microfluidics - Jens Ducrée Physics: Laminar and Turbulent Flow 31
32 Laminar PDF through Gap Rectangular element Width 2x Length l Depth b Cross section A x = b l Fore-part A z = 2 x b Total velocity gradient across element 2 dv / dx +/-x Microfluidics - Jens Ducrée Physics: Laminar and Turbulent Flow 32
33 Differential relationship Laminar PDF through Gap Parabolic flow profile Peak velocity Overall volume flow rate I V per channel width y Microfluidics - Jens Ducrée Physics: Laminar and Turbulent Flow 33
34 3.2. Laminar and Turbulent Flow 1. Critical Reynolds Number 2. Shear-Driven Laminar Flow 3. Couette Flow 4. Laminar PDF through Tube 5. Laminar PDF through Gap 6. Irrotational Flow 7. Centrifugal-Force Driven Flow 8. Effects in Laminar Flows 9. Turbulent Flows Microfluidics - Jens Ducrée Physics: Laminar and Turbulent Flow 34
35 Irrotational Flows Vorticity Vanishes in irrotational flows Vector identity Vanishing divergence of vorticity For vanishing vorticity, i.e. irrotational flow, v can be written Microfluidics - Jens Ducrée Physics: Laminar and Turbulent Flow 35
36 Potential Flow Theory Basic building blocks Set of special flow schemes Analogous to multipole concept in electrodynamics Mathematical point of view Special instances of Green s function Microfluidics - Jens Ducrée Physics: Laminar and Turbulent Flow 36
37 Velocity Potentials (2-dim.) Simplification 2-dim. velocity field v = (v x, v y ) Velocity potential Scalar Stream function Scalar monopole dipole Microfluidics - Jens Ducrée Physics: Laminar and Turbulent Flow 37
38 Hele-Shaw Table Visualization of basic 2-dim. flows Uniform stream over floor to drain Bottles Raised or lowered to adjust gravitational pressure Connected to through holes 2-dim. flow (top view) Sources and drains (monopoles) Holes Doublets (dipoles) Source and sink very close to each other Bottles spaced by same distance above and below floor Sometimes transparent cover to ensure uniform depth Microfluidics - Jens Ducrée Physics: Laminar and Turbulent Flow 38
39 Continuity equation Irrotational flow Navier-Stokes Rewritten Bernoulli Equation Using vector analysis General form of Bernoulli Integration in space vanishing vorticity Bernoulli Stationary conditions Integration in space Microfluidics - Jens Ducrée Physics: Laminar and Turbulent Flow 39
40 3.2. Laminar and Turbulent Flow 1. Critical Reynolds Number 2. Shear-Driven Laminar Flow 3. Couette Flow 4. Laminar PDF through Tube 5. Laminar PDF through Gap 6. Irrotational Flow 7. Centrifugal-Force Driven Flow 8. Effects in Laminar Flows 9. Turbulent Flows Microfluidics - Jens Ducrée Physics: Laminar and Turbulent Flow 40
41 Centrifugal-Force Driven Flow Flow Profile Laminar flow only driven by centrifugal forces Fluidic duct with radius r 0, angular frequency Stationary conditions, incompressible fluids No-slip boundary conditions Neglecting inertia and pressure effects Solution: z-dependent flow profile At center r z Velocity profile typically more flat than in PDF Microfluidics - Jens Ducrée Physics: Laminar and Turbulent Flow 41
42 Comparison to PDF CD PDF Parabolic velocity profiles Relation between steepness of velocity profiles Example - z = l = 1 cm - = 1000 kg m -3 (water) p = 1000 hpa - = 500 rpm (single speed CD player) v^ PDF profile much steeper Microfluidics - Jens Ducrée Physics: Laminar and Turbulent Flow 42
43 3.2. Laminar and Turbulent Flow 1. Critical Reynolds Number 2. Shear-Driven Laminar Flow 3. Couette Flow 4. Laminar PDF through Tube 5. Laminar PDF through Gap 6. Irrotational Flow 7. Centrifugal-Force Driven Flow 8. Effects in Laminar Flows 9. Turbulent Flows Microfluidics - Jens Ducrée Physics: Laminar and Turbulent Flow 43
44 Taylor Dispersion Axial dispersion of solute in laminar flow Dispersion of drugs in blood flow Situation Steady state flow Round tube Hypothetical absence of diffusion Solute follows flow profile Molecular diffusion Counteracts dispersion Axial spreading at D eff t Radial diffusion exchanges solute molecules between layers MF example v = 1 mm s -1, r 0 = 100 µm, D = 3 x 10-9 m 2 s -1 Second term prevails over unity Effective constant for axial diffusion ~ D(1 + c D 2 ) Microfluidics - Jens Ducrée Physics: Laminar and Turbulent Flow 44
45 Hydrodynamic Focusing Situation Microscopic tip at end of capillary Sucking in liquid from larger vessel Laminar regime Full solid angle projected onto tiny orifice cross section Microfluidics - Jens Ducrée Physics: Laminar and Turbulent Flow 45
46 Example: Hydrodynamic Focusing Ink dispenser near orifice of capillary Vertical position within capillary adjusts to transversal shift of dispenser Microfluidics - Jens Ducrée Physics: Laminar and Turbulent Flow 46
47 Reversed Experiment Fluid plug expelled from orifice of capillary into larger tank Small velocity Laminar High velocity Turbulent Microfluidics - Jens Ducrée Physics: Laminar and Turbulent Flow 47
48 Application to Cytometry and Mixing Microfluidics - Jens Ducrée Physics: Laminar and Turbulent Flow 48
49 3.2. Laminar and Turbulent Flow 1. Critical Reynolds Number 2. Shear-Driven Laminar Flow 3. Couette Flow 4. Laminar PDF through Tube 5. Laminar PDF through Gap 6. Irrotational Flow 7. Centrifugal-Force Driven Flow 8. Effects in Laminar Flows 9. Turbulent Flows Microfluidics - Jens Ducrée Physics: Laminar and Turbulent Flow 49
50 Turbulent Flows Turbulent flow in tube for Re > Re crit Turbulent profile Velocity vectors unpredictably oscillating in time Time-averaged profile Much flatter profile than laminar flow Tendency for flattening grows with Re Microfluidics - Jens Ducrée Physics: Laminar and Turbulent Flow 50
51 Turbulent Flows Throughput according to Blasius ( ) Approximations well above 3Re * Laminar p l r Mean velocity p l r Microfluidics - Jens Ducrée Physics: Laminar and Turbulent Flow 51
52 Scaling of Mean Velocity Turbulent Laminar Pressure gradient Radius Density Viscosity Same pressure gradient applied to tube Smaller turbulent flow velocity Turbulent velocity varies with density Flow energy dissipated by turbulent mixing Laminar flow Viscous forces between smoothly sliding layers Turbulent regime Enhanced flow resistance Microfluidics - Jens Ducrée Physics: Laminar and Turbulent Flow 52
53 Entrance Effects Laminar Turbulent Microfluidic systems Re ~1 and r 0 = 100 µm z devel = 10 µm (laminar) Microfluidics - Jens Ducrée Physics: Laminar and Turbulent Flow 53
54 Surface roughness Local eddy formation Darcy-Weissbach relation Pressure loss Flow velocity Friction factor Friction Losses f = const. for smooth tube and laminar conditions Microfluidics - Jens Ducrée Physics: Laminar and Turbulent Flow 54
55 Roughness-Viscosity Model Surface roughness induces turbulence in boundary layer Surface roughness height Roughness viscosity Adding to bulk viscosity Surface roughness Reynolds number Empirical factor Microfluidics - Jens Ducrée Physics: Laminar and Turbulent Flow 55
Microfluidics 1 Basics, Laminar flow, shear and flow profiles
MT-0.6081 Microfluidics and BioMEMS Microfluidics 1 Basics, Laminar flow, shear and flow profiles 11.1.2017 Ville Jokinen Outline of the next 3 weeks: Today: Microfluidics 1: Laminar flow, flow profiles,
More informationBasic Fluid Mechanics
Basic Fluid Mechanics Chapter 6A: Internal Incompressible Viscous Flow 4/16/2018 C6A: Internal Incompressible Viscous Flow 1 6.1 Introduction For the present chapter we will limit our study to incompressible
More informationLecture 2: Hydrodynamics at milli micrometer scale
1 at milli micrometer scale Introduction Flows at milli and micro meter scales are found in various fields, used for several processes and open up possibilities for new applications: Injection Engineering
More informationPrinciples of Convection
Principles of Convection Point Conduction & convection are similar both require the presence of a material medium. But convection requires the presence of fluid motion. Heat transfer through the: Solid
More informationTable of Contents. Foreword... xiii. Preface... xv
Table of Contents Foreword.... xiii Preface... xv Chapter 1. Fundamental Equations, Dimensionless Numbers... 1 1.1. Fundamental equations... 1 1.1.1. Local equations... 1 1.1.2. Integral conservation equations...
More informationShell Balances in Fluid Mechanics
Shell Balances in Fluid Mechanics R. Shankar Subramanian Department of Chemical and Biomolecular Engineering Clarkson University When fluid flow occurs in a single direction everywhere in a system, shell
More informationBoundary-Layer Theory
Hermann Schlichting Klaus Gersten Boundary-Layer Theory With contributions from Egon Krause and Herbert Oertel Jr. Translated by Katherine Mayes 8th Revised and Enlarged Edition With 287 Figures and 22
More informationCONVECTIVE HEAT TRANSFER
CONVECTIVE HEAT TRANSFER Mohammad Goharkhah Department of Mechanical Engineering, Sahand Unversity of Technology, Tabriz, Iran CHAPTER 4 HEAT TRANSFER IN CHANNEL FLOW BASIC CONCEPTS BASIC CONCEPTS Laminar
More informationDetailed Outline, M E 320 Fluid Flow, Spring Semester 2015
Detailed Outline, M E 320 Fluid Flow, Spring Semester 2015 I. Introduction (Chapters 1 and 2) A. What is Fluid Mechanics? 1. What is a fluid? 2. What is mechanics? B. Classification of Fluid Flows 1. Viscous
More informationV/ t = 0 p/ t = 0 ρ/ t = 0. V/ s = 0 p/ s = 0 ρ/ s = 0
UNIT III FLOW THROUGH PIPES 1. List the types of fluid flow. Steady and unsteady flow Uniform and non-uniform flow Laminar and Turbulent flow Compressible and incompressible flow Rotational and ir-rotational
More informationChapter 10 Flow in Conduits
Chapter 10 Flow in Conduits 10.1 Classifying Flow Laminar Flow and Turbulent Flow Laminar flow Unpredictable Turbulent flow Near entrance: undeveloped developing flow In developing flow, the wall shear
More informationUNIT II CONVECTION HEAT TRANSFER
UNIT II CONVECTION HEAT TRANSFER Convection is the mode of heat transfer between a surface and a fluid moving over it. The energy transfer in convection is predominately due to the bulk motion of the fluid
More information1. Introduction, tensors, kinematics
1. Introduction, tensors, kinematics Content: Introduction to fluids, Cartesian tensors, vector algebra using tensor notation, operators in tensor form, Eulerian and Lagrangian description of scalar and
More informationENGINEERING FLUID MECHANICS. CHAPTER 1 Properties of Fluids
CHAPTER 1 Properties of Fluids ENGINEERING FLUID MECHANICS 1.1 Introduction 1.2 Development of Fluid Mechanics 1.3 Units of Measurement (SI units) 1.4 Mass, Density, Specific Weight, Specific Volume, Specific
More informationTable of Contents. Preface... xiii
Preface... xiii PART I. ELEMENTS IN FLUID MECHANICS... 1 Chapter 1. Local Equations of Fluid Mechanics... 3 1.1. Forces, stress tensor, and pressure... 4 1.2. Navier Stokes equations in Cartesian coordinates...
More informationChemical and Biomolecular Engineering 150A Transport Processes Spring Semester 2017
Chemical and Biomolecular Engineering 150A Transport Processes Spring Semester 2017 Objective: Text: To introduce the basic concepts of fluid mechanics and heat transfer necessary for solution of engineering
More informationFluid Dynamics Exercises and questions for the course
Fluid Dynamics Exercises and questions for the course January 15, 2014 A two dimensional flow field characterised by the following velocity components in polar coordinates is called a free vortex: u r
More informationUNIT IV BOUNDARY LAYER AND FLOW THROUGH PIPES Definition of boundary layer Thickness and classification Displacement and momentum thickness Development of laminar and turbulent flows in circular pipes
More informationFluid Mechanics II Viscosity and shear stresses
Fluid Mechanics II Viscosity and shear stresses Shear stresses in a Newtonian fluid A fluid at rest can not resist shearing forces. Under the action of such forces it deforms continuously, however small
More informationFluid Mechanics. Chapter 9 Surface Resistance. Dr. Amer Khalil Ababneh
Fluid Mechanics Chapter 9 Surface Resistance Dr. Amer Khalil Ababneh Wind tunnel used for testing flow over models. Introduction Resistances exerted by surfaces are a result of viscous stresses which create
More informationINSTITUTE OF AERONAUTICAL ENGINEERING Dundigal, Hyderabad AERONAUTICAL ENGINEERING QUESTION BANK : AERONAUTICAL ENGINEERING.
Course Name Course Code Class Branch INSTITUTE OF AERONAUTICAL ENGINEERING Dundigal, Hyderabad - 00 0 AERONAUTICAL ENGINEERING : Mechanics of Fluids : A00 : II-I- B. Tech Year : 0 0 Course Coordinator
More informationPart A: 1 pts each, 10 pts total, no partial credit.
Part A: 1 pts each, 10 pts total, no partial credit. 1) (Correct: 1 pt/ Wrong: -3 pts). The sum of static, dynamic, and hydrostatic pressures is constant when flow is steady, irrotational, incompressible,
More informationMOMENTUM TRANSPORT Velocity Distributions in Turbulent Flow
TRANSPORT PHENOMENA MOMENTUM TRANSPORT Velocity Distributions in Turbulent Flow Introduction to Turbulent Flow 1. Comparisons of laminar and turbulent flows 2. Time-smoothed equations of change for incompressible
More informationThe Reynolds experiment
Chapter 13 The Reynolds experiment 13.1 Laminar and turbulent flows Let us consider a horizontal pipe of circular section of infinite extension subject to a constant pressure gradient (see section [10.4]).
More informationFigure 3: Problem 7. (a) 0.9 m (b) 1.8 m (c) 2.7 m (d) 3.6 m
1. For the manometer shown in figure 1, if the absolute pressure at point A is 1.013 10 5 Pa, the absolute pressure at point B is (ρ water =10 3 kg/m 3, ρ Hg =13.56 10 3 kg/m 3, ρ oil = 800kg/m 3 ): (a)
More informationHeat Transfer Convection
Heat ransfer Convection Previous lectures conduction: heat transfer without fluid motion oday (textbook nearly 00 pages) Convection: heat transfer with fluid motion Research methods different Natural Convection
More informationConvection Heat Transfer. Introduction
Convection Heat Transfer Reading Problems 12-1 12-8 12-40, 12-49, 12-68, 12-70, 12-87, 12-98 13-1 13-6 13-39, 13-47, 13-59 14-1 14-4 14-18, 14-24, 14-45, 14-82 Introduction Newton s Law of Cooling Controlling
More informationPhysical Properties of Fluids
Physical Properties of Fluids Viscosity: Resistance to relative motion between adjacent layers of fluid. Dynamic Viscosity:generally represented as µ. A flat plate moved slowly with a velocity V parallel
More informationLiquid or gas flow through pipes or ducts is commonly used in heating and
cen58933_ch08.qxd 9/4/2002 11:29 AM Page 419 INTERNAL FORCED CONVECTION CHAPTER 8 Liquid or gas flow through pipes or ducts is commonly used in heating and cooling applications. The fluid in such applications
More informationDetailed Outline, M E 521: Foundations of Fluid Mechanics I
Detailed Outline, M E 521: Foundations of Fluid Mechanics I I. Introduction and Review A. Notation 1. Vectors 2. Second-order tensors 3. Volume vs. velocity 4. Del operator B. Chapter 1: Review of Basic
More informationConvective Mass Transfer
Convective Mass Transfer Definition of convective mass transfer: The transport of material between a boundary surface and a moving fluid or between two immiscible moving fluids separated by a mobile interface
More informationPHYSICAL MECHANISM OF CONVECTION
Tue 8:54:24 AM Slide Nr. 0 of 33 Slides PHYSICAL MECHANISM OF CONVECTION Heat transfer through a fluid is by convection in the presence of bulk fluid motion and by conduction in the absence of it. Chapter
More informationFORMULA SHEET. General formulas:
FORMULA SHEET You may use this formula sheet during the Advanced Transport Phenomena course and it should contain all formulas you need during this course. Note that the weeks are numbered from 1.1 to
More informationFriction Factors and Drag Coefficients
Levicky 1 Friction Factors and Drag Coefficients Several equations that we have seen have included terms to represent dissipation of energy due to the viscous nature of fluid flow. For example, in the
More informationLecture 30 Review of Fluid Flow and Heat Transfer
Objectives In this lecture you will learn the following We shall summarise the principles used in fluid mechanics and heat transfer. It is assumed that the student has already been exposed to courses in
More informationCONVECTIVE HEAT TRANSFER
CONVECTIVE HEAT TRANSFER Mohammad Goharkhah Department of Mechanical Engineering, Sahand Unversity of Technology, Tabriz, Iran CHAPTER 3 LAMINAR BOUNDARY LAYER FLOW LAMINAR BOUNDARY LAYER FLOW Boundary
More informationContents. I Introduction 1. Preface. xiii
Contents Preface xiii I Introduction 1 1 Continuous matter 3 1.1 Molecules................................ 4 1.2 The continuum approximation.................... 6 1.3 Newtonian mechanics.........................
More informationFluid Dynamics: Theory, Computation, and Numerical Simulation Second Edition
Fluid Dynamics: Theory, Computation, and Numerical Simulation Second Edition C. Pozrikidis m Springer Contents Preface v 1 Introduction to Kinematics 1 1.1 Fluids and solids 1 1.2 Fluid parcels and flow
More informationCONVECTION HEAT TRANSFER
CONVECTION HEAT TRANSFER THIRD EDITION Adrian Bejan J. A. Jones Professor of Mechanical Engineering Duke University Durham, North Carolina WILEY JOHN WILEY & SONS, INC. CONTENTS Preface Preface to the
More informationFluid Flow, Heat Transfer and Boiling in Micro-Channels
L.P. Yarin A. Mosyak G. Hetsroni Fluid Flow, Heat Transfer and Boiling in Micro-Channels 4Q Springer 1 Introduction 1 1.1 General Overview 1 1.2 Scope and Contents of Part 1 2 1.3 Scope and Contents of
More information2. FLUID-FLOW EQUATIONS SPRING 2019
2. FLUID-FLOW EQUATIONS SPRING 2019 2.1 Introduction 2.2 Conservative differential equations 2.3 Non-conservative differential equations 2.4 Non-dimensionalisation Summary Examples 2.1 Introduction Fluid
More informationV (r,t) = i ˆ u( x, y,z,t) + ˆ j v( x, y,z,t) + k ˆ w( x, y, z,t)
IV. DIFFERENTIAL RELATIONS FOR A FLUID PARTICLE This chapter presents the development and application of the basic differential equations of fluid motion. Simplifications in the general equations and common
More informationChapter 6: Incompressible Inviscid Flow
Chapter 6: Incompressible Inviscid Flow 6-1 Introduction 6-2 Nondimensionalization of the NSE 6-3 Creeping Flow 6-4 Inviscid Regions of Flow 6-5 Irrotational Flow Approximation 6-6 Elementary Planar Irrotational
More informationFluid Mechanics Theory I
Fluid Mechanics Theory I Last Class: 1. Introduction 2. MicroTAS or Lab on a Chip 3. Microfluidics Length Scale 4. Fundamentals 5. Different Aspects of Microfluidcs Today s Contents: 1. Introduction to
More informationNPTEL Quiz Hydraulics
Introduction NPTEL Quiz Hydraulics 1. An ideal fluid is a. One which obeys Newton s law of viscosity b. Frictionless and incompressible c. Very viscous d. Frictionless and compressible 2. The unit of kinematic
More informationCONVECTION HEAT TRANSFER
CONVECTION HEAT TRANSFER SECOND EDITION Adrian Bejan J. A. Jones Professor of Mechanical Engineering Duke University Durham, North Carolina A WILEY-INTERSCIENCE PUBUCATION JOHN WILEY & SONS, INC. New York
More informationCENG 501 Examination Problem: Estimation of Viscosity with a Falling - Cylinder Viscometer
CENG 501 Examination Problem: Estimation of Viscosity with a Falling - Cylinder Viscometer You are assigned to design a fallingcylinder viscometer to measure the viscosity of Newtonian liquids. A schematic
More informationContents. 2. Fluids. 1. Introduction
Contents 1. Introduction 2. Fluids 3. Physics of Microfluidic Systems 4. Microfabrication Technologies 5. Flow Control 6. Micropumps 7. Sensors 8. Ink-Jet Technology 9. Liquid Handling 10.Microarrays 11.Microreactors
More informationConvection. forced convection when the flow is caused by external means, such as by a fan, a pump, or atmospheric winds.
Convection The convection heat transfer mode is comprised of two mechanisms. In addition to energy transfer due to random molecular motion (diffusion), energy is also transferred by the bulk, or macroscopic,
More informationCalculate the total volumes of the following typical microfluidic channel dimensions.
Microfluidics and BioMEMS, 2018, Exercise 1. Unit conversions and laminar flow. (Note: this version, both the assignment and the model solutions, is now fixed (18.1.2018) so that the flow rate is 0.25µl/min
More informationFluid Mechanics Prof. T.I. Eldho Department of Civil Engineering Indian Institute of Technology, Bombay. Lecture - 17 Laminar and Turbulent flows
Fluid Mechanics Prof. T.I. Eldho Department of Civil Engineering Indian Institute of Technology, Bombay Lecture - 17 Laminar and Turbulent flows Welcome back to the video course on fluid mechanics. In
More informationFE Fluids Review March 23, 2012 Steve Burian (Civil & Environmental Engineering)
Topic: Fluid Properties 1. If 6 m 3 of oil weighs 47 kn, calculate its specific weight, density, and specific gravity. 2. 10.0 L of an incompressible liquid exert a force of 20 N at the earth s surface.
More informationExperiment (4): Flow measurement
Experiment (4): Flow measurement Introduction: The flow measuring apparatus is used to familiarize the students with typical methods of flow measurement of an incompressible fluid and, at the same time
More informationChapter 10. Solids and Fluids
Chapter 10 Solids and Fluids Surface Tension Net force on molecule A is zero Pulled equally in all directions Net force on B is not zero No molecules above to act on it Pulled toward the center of the
More informationCE 6303 MECHANICS OF FLUIDS L T P C QUESTION BANK 3 0 0 3 UNIT I FLUID PROPERTIES AND FLUID STATICS PART - A 1. Define fluid and fluid mechanics. 2. Define real and ideal fluids. 3. Define mass density
More informationLecture 1. Hydrodynamic Stability F. H. Busse NotesbyA.Alexakis&E.Evstatiev
Lecture Hydrodynamic Stability F. H. Busse NotesbyA.Alexakis&E.Evstatiev Introduction In many cases in nature, like in the Earth s atmosphere, in the interior of stars and planets, one sees the appearance
More informationCFD Analysis of Forced Convection Flow and Heat Transfer in Semi-Circular Cross-Sectioned Micro-Channel
CFD Analysis of Forced Convection Flow and Heat Transfer in Semi-Circular Cross-Sectioned Micro-Channel *1 Hüseyin Kaya, 2 Kamil Arslan 1 Bartın University, Mechanical Engineering Department, Bartın, Turkey
More informationCLASS SCHEDULE 2013 FALL
CLASS SCHEDULE 2013 FALL Class # or Lab # 1 Date Aug 26 2 28 Important Concepts (Section # in Text Reading, Lecture note) Examples/Lab Activities Definition fluid; continuum hypothesis; fluid properties
More informationThe Turbulent Rotational Phase Separator
The Turbulent Rotational Phase Separator J.G.M. Kuerten and B.P.M. van Esch Dept. of Mechanical Engineering, Technische Universiteit Eindhoven, The Netherlands j.g.m.kuerten@tue.nl Summary. The Rotational
More informationFLUID MECHANICS PROF. DR. METİN GÜNER COMPILER
FLUID MECHANICS PROF. DR. METİN GÜNER COMPILER ANKARA UNIVERSITY FACULTY OF AGRICULTURE DEPARTMENT OF AGRICULTURAL MACHINERY AND TECHNOLOGIES ENGINEERING 1 5. FLOW IN PIPES 5.1.3. Pressure and Shear Stress
More informationFLUID MECHANICS. Chapter 9 Flow over Immersed Bodies
FLUID MECHANICS Chapter 9 Flow over Immersed Bodies CHAP 9. FLOW OVER IMMERSED BODIES CONTENTS 9.1 General External Flow Characteristics 9.3 Drag 9.4 Lift 9.1 General External Flow Characteristics 9.1.1
More informationExperiment- To determine the coefficient of impact for vanes. Experiment To determine the coefficient of discharge of an orifice meter.
SUBJECT: FLUID MECHANICS VIVA QUESTIONS (M.E 4 th SEM) Experiment- To determine the coefficient of impact for vanes. Q1. Explain impulse momentum principal. Ans1. Momentum equation is based on Newton s
More informationFundamentals of Fluid Mechanics
Sixth Edition Fundamentals of Fluid Mechanics International Student Version BRUCE R. MUNSON DONALD F. YOUNG Department of Aerospace Engineering and Engineering Mechanics THEODORE H. OKIISHI Department
More informationMYcsvtu Notes HEAT TRANSFER BY CONVECTION
www.mycsvtunotes.in HEAT TRANSFER BY CONVECTION CONDUCTION Mechanism of heat transfer through a solid or fluid in the absence any fluid motion. CONVECTION Mechanism of heat transfer through a fluid in
More informationMicroscopic Momentum Balance Equation (Navier-Stokes)
CM3110 Transport I Part I: Fluid Mechanics Microscopic Momentum Balance Equation (Navier-Stokes) Professor Faith Morrison Department of Chemical Engineering Michigan Technological University 1 Microscopic
More informationEXPERIMENT No.1 FLOW MEASUREMENT BY ORIFICEMETER
EXPERIMENT No.1 FLOW MEASUREMENT BY ORIFICEMETER 1.1 AIM: To determine the co-efficient of discharge of the orifice meter 1.2 EQUIPMENTS REQUIRED: Orifice meter test rig, Stopwatch 1.3 PREPARATION 1.3.1
More informationLesson 6 Review of fundamentals: Fluid flow
Lesson 6 Review of fundamentals: Fluid flow The specific objective of this lesson is to conduct a brief review of the fundamentals of fluid flow and present: A general equation for conservation of mass
More informationProblem 4.3. Problem 4.4
Problem 4.3 Problem 4.4 Problem 4.5 Problem 4.6 Problem 4.7 This is forced convection flow over a streamlined body. Viscous (velocity) boundary layer approximations can be made if the Reynolds number Re
More informationMicrofluidic Devices. Microfluidic Device Market. Microfluidic Principles Part 1. Introduction to BioMEMS & Medical Microdevices.
Introduction to BioMEMS & Medical Microdevices Microfluidic Principles Part 1 Companion lecture to the textbook: Fundamentals of BioMEMS and Medical Microdevices, by Prof., http://saliterman.umn.edu/,
More information2. Modeling of shrinkage during first drying period
2. Modeling of shrinkage during first drying period In this chapter we propose and develop a mathematical model of to describe nonuniform shrinkage of porous medium during drying starting with several
More information150A Review Session 2/13/2014 Fluid Statics. Pressure acts in all directions, normal to the surrounding surfaces
Fluid Statics Pressure acts in all directions, normal to the surrounding surfaces or Whenever a pressure difference is the driving force, use gauge pressure o Bernoulli equation o Momentum balance with
More informationInterphase Transport in Isothermal Systems
Transport Phenomena Interphase Transport in Isothermal Systems 1 Interphase Transport in Isothermal Systems 1. Definition of friction factors 2. Friction factors for flow in tubes 3. Friction factors for
More informationVisualization of flow pattern over or around immersed objects in open channel flow.
EXPERIMENT SEVEN: FLOW VISUALIZATION AND ANALYSIS I OBJECTIVE OF THE EXPERIMENT: Visualization of flow pattern over or around immersed objects in open channel flow. II THEORY AND EQUATION: Open channel:
More informationR09. d water surface. Prove that the depth of pressure is equal to p +.
Code No:A109210105 R09 SET-1 B.Tech II Year - I Semester Examinations, December 2011 FLUID MECHANICS (CIVIL ENGINEERING) Time: 3 hours Max. Marks: 75 Answer any five questions All questions carry equal
More informationPhysics 3 Summer 1990 Lab 7 - Hydrodynamics
Physics 3 Summer 1990 Lab 7 - Hydrodynamics Theory Consider an ideal liquid, one which is incompressible and which has no internal friction, flowing through pipe of varying cross section as shown in figure
More informationOE4625 Dredge Pumps and Slurry Transport. Vaclav Matousek October 13, 2004
OE465 Vaclav Matousek October 13, 004 1 Dredge Vermelding Pumps onderdeel and Slurry organisatie Transport OE465 Vaclav Matousek October 13, 004 Dredge Vermelding Pumps onderdeel and Slurry organisatie
More informationIntroduction to Turbulence AEEM Why study turbulent flows?
Introduction to Turbulence AEEM 7063-003 Dr. Peter J. Disimile UC-FEST Department of Aerospace Engineering Peter.disimile@uc.edu Intro to Turbulence: C1A Why 1 Most flows encountered in engineering and
More informationFluid dynamics - viscosity and. turbulent flow
Fluid dynamics - viscosity and Fluid statics turbulent flow What is a fluid? Density Pressure Fluid pressure and depth Pascal s principle Buoyancy Archimedes principle Fluid dynamics Reynolds number Equation
More informationChapter 8 Flow in Conduits
57:00 Mechanics of Fluids and Transport Processes Chapter 8 Professor Fred Stern Fall 013 1 Chapter 8 Flow in Conduits Entrance and developed flows Le = f(d, V,, ) i theorem Le/D = f(re) Laminar flow:
More informationCALIFORNIA POLYTECHNIC STATE UNIVERSITY Mechanical Engineering Department ME 347, Fluid Mechanics II, Winter 2018
CALIFORNIA POLYTECHNIC STATE UNIVERSITY Mechanical Engineering Department ME 347, Fluid Mechanics II, Winter 2018 Date Day Subject Read HW Sept. 21 F Introduction 1, 2 24 M Finite control volume analysis
More informationChapter Four fluid flow mass, energy, Bernoulli and momentum
4-1Conservation of Mass Principle Consider a control volume of arbitrary shape, as shown in Fig (4-1). Figure (4-1): the differential control volume and differential control volume (Total mass entering
More informationModeling of turbulence in stirred vessels using large eddy simulation
Modeling of turbulence in stirred vessels using large eddy simulation André Bakker (presenter), Kumar Dhanasekharan, Ahmad Haidari, and Sung-Eun Kim Fluent Inc. Presented at CHISA 2002 August 25-29, Prague,
More information4.2 Concepts of the Boundary Layer Theory
Advanced Heat by Amir Faghri, Yuwen Zhang, and John R. Howell 4.2 Concepts of the Boundary Layer Theory It is difficult to solve the complete viscous flow fluid around a body unless the geometry is very
More informationIran University of Science & Technology School of Mechanical Engineering Advance Fluid Mechanics
1. Consider a sphere of radius R immersed in a uniform stream U0, as shown in 3 R Fig.1. The fluid velocity along streamline AB is given by V ui U i x 1. 0 3 Find (a) the position of maximum fluid acceleration
More information10.52 Mechanics of Fluids Spring 2006 Problem Set 3
10.52 Mechanics of Fluids Spring 2006 Problem Set 3 Problem 1 Mass transfer studies involving the transport of a solute from a gas to a liquid often involve the use of a laminar jet of liquid. The situation
More informationFluid Mechanics. Spring 2009
Instructor: Dr. Yang-Cheng Shih Department of Energy and Refrigerating Air-Conditioning Engineering National Taipei University of Technology Spring 2009 Chapter 1 Introduction 1-1 General Remarks 1-2 Scope
More informationMECHANICAL PROPERTIES OF FLUIDS:
Important Definitions: MECHANICAL PROPERTIES OF FLUIDS: Fluid: A substance that can flow is called Fluid Both liquids and gases are fluids Pressure: The normal force acting per unit area of a surface is
More informationWilliam В. Brower, Jr. A PRIMER IN FLUID MECHANICS. Dynamics of Flows in One Space Dimension. CRC Press Boca Raton London New York Washington, D.C.
William В. Brower, Jr. A PRIMER IN FLUID MECHANICS Dynamics of Flows in One Space Dimension CRC Press Boca Raton London New York Washington, D.C. Table of Contents Chapter 1 Fluid Properties Kinetic Theory
More informationIntroduction to Marine Hydrodynamics
1896 1920 1987 2006 Introduction to Marine Hydrodynamics (NA235) Department of Naval Architecture and Ocean Engineering School of Naval Architecture, Ocean & Civil Engineering First Assignment The first
More informationVortex Induced Vibrations
Vortex Induced Vibrations By: Abhiroop Jayanthi Indian Institute of Technology, Delhi Some Questions! What is VIV? What are the details of a steady approach flow past a stationary cylinder? How and why
More informationOutlines. simple relations of fluid dynamics Boundary layer analysis. Important for basic understanding of convection heat transfer
Forced Convection Outlines To examine the methods of calculating convection heat transfer (particularly, the ways of predicting the value of convection heat transfer coefficient, h) Convection heat transfer
More informationExperimental and Theoretical Investigation of Hydrodynamics Characteristics and Heat Transfer for Newtonian and Non-newtonian Fluids
International Journal of Energy Science and Engineering Vol. 2, No. 3, 2016, pp. 13-22 http://www.aiscience.org/journal/ijese ISSN: 2381-7267 (Print); ISSN: 2381-7275 (Online) Experimental and Theoretical
More informationvector H. If O is the point about which moments are desired, the angular moment about O is given:
The angular momentum A control volume analysis can be applied to the angular momentum, by letting B equal to angularmomentum vector H. If O is the point about which moments are desired, the angular moment
More informationM E 320 Supplementary Material Pralav Shetty
M E 320 Supplementary Material Pralav Shetty Note: In order to view the demonstrations below, you must first download CDF player to your PC/Mac/Linux. Link for CDF player http://www.wolfram.com/cdf-player/
More informationThe Bernoulli Equation
The Bernoulli Equation The most used and the most abused equation in fluid mechanics. Newton s Second Law: F = ma In general, most real flows are 3-D, unsteady (x, y, z, t; r,θ, z, t; etc) Let consider
More informationNumerical Heat and Mass Transfer
Master Degree in Mechanical Engineering Numerical Heat and Mass Transfer 15-Convective Heat Transfer Fausto Arpino f.arpino@unicas.it Introduction In conduction problems the convection entered the analysis
More informationUNIT I FLUID PROPERTIES AND STATICS
SIDDHARTH GROUP OF INSTITUTIONS :: PUTTUR Siddharth Nagar, Narayanavanam Road 517583 QUESTION BANK (DESCRIPTIVE) Subject with Code : Fluid Mechanics (16CE106) Year & Sem: II-B.Tech & I-Sem Course & Branch:
More informationSimulating Drag Crisis for a Sphere Using Skin Friction Boundary Conditions
Simulating Drag Crisis for a Sphere Using Skin Friction Boundary Conditions Johan Hoffman May 14, 2006 Abstract In this paper we use a General Galerkin (G2) method to simulate drag crisis for a sphere,
More informationGeneral introduction to Hydrodynamic Instabilities
KTH ROYAL INSTITUTE OF TECHNOLOGY General introduction to Hydrodynamic Instabilities L. Brandt & J.-Ch. Loiseau KTH Mechanics, November 2015 Luca Brandt Professor at KTH Mechanics Email: luca@mech.kth.se
More informationChapter 3 Bernoulli Equation
1 Bernoulli Equation 3.1 Flow Patterns: Streamlines, Pathlines, Streaklines 1) A streamline, is a line that is everywhere tangent to the velocity vector at a given instant. Examples of streamlines around
More information