D a t a s h e e t. T o r q u e s t a n d a r d. S e r i e s D m - T N. ( 1 N m N m ) Benefits/Application. Options/Accessories
|
|
|
- Jennifer Summers
- 6 years ago
- Views:
Transcription
1 D a t a s h e e t T o r q u e s t a n d a r d S e r i e s D m - T N ( 1 N m N m ) Benefits/Application Class VN (better class 0,05 acc. DIN 51309) For highest precision requirements Easy adaption For static moments Insensitive against parasitic forces and moments Standardised connection dimensions Options/Accessories Bending moment circuits Temperature measurement with PT Serie Dm-TN (eng.) 1/05/017
2 T e c h n i c a l d a t a C l a s s V N Rated Torque M nom N m Torque measurement range % 40 - Interpolation error f c % ± 0,05 Reversibility error v % 0,063 Metrological Data Reproducibility error in different mounting positions Repeatability error in unchanged mounting position b, b rg % 0,01 b', b rv % 0,005 Zero error f 0 % 0,006 Creep % 0,004 characteristic value per 10 K TK C %/10 K 0,01 TK 0 %/10 K 0,008 Rated characteristic value C nom mv/v Electrical Data Input resistance R e Ω > 350 Output resistance R a Ω > 300 Insulation resistance R is Ω > 10 9 Operating range of excitation voltage B U, G V 5-1 V Protection (DIN EN 6059) 54 Mass m kg 0,4 1, 4,6 15, Limits Torque limit % 110 Rated temperature range B T, nom C 17-7 Operating temperature range B T, G C ) Size 1 5 N m: ca. 1,8 mv/v; nominal value is specified on the type label. Size 10 N m: mv/v Serie Dm-TN (eng.) 1/05/017 Page of 9
3 T e c h n i c a l d a t a C l a s s 0, 0 5 Rated Torque M nom N m Torque measurement range % 0 - Interpolation error f c % ± 0,05 Reversibility error v % 0,063 Metrological Data Reproducibility error in different mounting positions Repeatability error in unchanged mounting position b, b rg % 0,05 b', b rv % 0,05 Zero error f 0 % 0,015 Creep % 0,008 characteristic value per 10 K TK C %/10 K 0,01 TK 0 %/10 K 0,008 Rated characteristic value C nom mv/v 1) Electrical Data Input resistance R e Ω > 350 Output resistance R a Ω > 300 Insulation resistance R is Ω > 10 9 Operating range of excitation voltage B U, G V 5-1 V Protection (DIN EN 6059) 54 Mass m kg 0,3 0,4 1, 4,6 15, Limits Torque limit % 110 Rated temperature range B T, nom C 17-7 Operating temperature range B T, G C ) Size 1 5 N m: ca. 1,8 mv/v; nominal value is specified on the type label. Size 10 N m: mv/v Serie Dm-TN (eng.) 1/05/017 Page 3 of 9
4 T e c h n i c a l d a t a C l a s s 0, 1 Rated Torque M nom N m Torque measurement range % 0 - Interpolation error f c % ± 0,05 Reversibility error v % 0,15 Metrological Data Reproducibility error in different mounting positions Repeatability error in unchanged mounting position b, b rg % 0,1 b', b rv % 0,05 Zero error f 0 % 0,05 Creep % 0,01 characteristic value per 10 K TK C %/10 K 0,01 TK 0 %/10 K 0,01 Rated characteristic value C nom mv/v 1) Electrical Data Input resistance R e Ω > 350 Output resistance R a Ω > 300 Insulation resistance R is Ω > 10 9 Operating range of excitation voltage B U, G V 5-1 V Protection (DIN EN 6059) 54 Mass m kg 0,3 0,4 1, 4,6 15,8 36,5 37 Limits Torque limit % 110 Rated temperature range B T, nom C 17-7 Operating temperature range B T, G C ) Size 1 5 N m: ca. 1,8 mv/v; nominal value is specified on the type label. Size 10 N m: mv/v Serie Dm-TN (eng.) 1/05/017 Page 4 of 9
5 T e c h n i c a l d a t a C l a s s 0, Rated Torque M nom N m Torque measurement range % 0 - Interpolation error f c % ± 0,1 Reversibility error v % 0,5 Metrological Data Reproducibility error in different mounting positions Repeatability error in unchanged mounting position b, b rg % 0, b', b rv % 0,1 Zero error f 0 % 0,05 Creep % 0,0 characteristic value per 10 K TK C %/10 K 0,0 TK 0 %/10 K 0,0 Rated characteristic value C nom mv/v 1) Electrical Data Input resistance R e Ω > 350 Output resistance R a Ω > 300 Insulation resistance R is Ω > 10 9 Operating range of excitation voltage B U, G V 5-1 V Protection (DIN EN 6059) 54 Mass m kg 0,3 0,4 1, 4,6 15,8 36,5 37 Limits Torque limit % 110 Rated temperature range B T, nom C 17-7 Operating temperature range B T, G C ) Size 1 5 N m: ca. 1,8 mv/v; nominal value is specified on the type label. Size 10 N m: mv/v Serie Dm-TN (eng.) 1/05/017 Page 5 of 9
6 C a b l e c o n n e c t i o n x x Permanent connection end connected 1)3)4) Connection pluggable 1))5) 7-pin LEMO Series 1 Female 3) 7-pin LEMO Series 0 Female: - Male: Connection Pin Pin Supply voltage (+) U in+ 3 3 Supply voltage (-) U in- Measurement signal (+) U out+ 1 1 Measurement signal (-) U out- 4 4 Sense (+) Sense+ 5 5 Sense (-) Sense- 6 6 Shielding Housing Housing 1) View to welding side ) Female LEMO S.A. Typ: EGG.1B.307.CLL; Male: FGG.1B.307.CLA.D7 3) Starting from size 10 N m 4) Cable length: 0.5 m 5) Starting from size 0 N m available Permanent connection end connected (up to size 10 N m) Connection pluggable Available types of connectors for the cable: D-Sub 9 pol ;D-Sub 15pol ; M-S 7pol ;LEMO Series1 7pol Configuration with customer defined connection is possible Serie Dm-TN (eng.) 1/05/017 Page 6 of 9
7 O p t i o n : B e n d i n g m o m e n t Rated torque M nom N m Temperature effect on characteristic value per 10 K TK C %/10 K 0, TK 0 %/10 K 0, The bending moment measuring circuits Mx and My can with use of a multi-channel measuring amplifier be used, to check the force transmission point. More information is available on request. O p t i o n s : T e m p e r a t u r e s e n s o r Temperature sensors types: PT Serie Dm-TN (eng.) 1/05/017 Page 7 of 9
8 M a t i n g d i m e n s i o n s u p t o N m Typ: 1 N m - 10 N m Typ: 0 N m - N m Rated Torque M nom N m Diameter ØD 1 mm Diameter ØD mm 15h7 0h7 Height H 1 mm Height H mm 63 66,5 Height H 3 mm 63 66,5 Height H 4 mm Height H 5 mm Serie Dm-TN (eng.) 1/05/017 Page 8 of 9
9 M a t i n g d i m e n s i o n s u p t o N m Typ: 00 N m N m Rated Torque M nom N m Diameter ØD 1 mm Diameter ØD mm 30h7 50h7 70h7 110h7 Height H 1 mm Height H mm Height H 3 mm Änderungen vorbehalten. Alle Angaben beschreiben unsere Produkte in allgemeiner Form. Sie stellen keine vereinbarte Beschaffenheit im Sinne des 434 Abs. 1 BGB dar. GTM Testing and Metrology GmbH Philipp-Reis-Straße 4-6, Bickenbach, Germany Phone +49(0) , Fax +49(0) contact@gtm-gmbh.com
Benefits/Application. Very high-cycle fatigue resistant up to 80 % of nominal load. Easy assembling, lots of possibilities. Options/Accessories
D a t a s h e e t T o r q u e T r a n s d u c e r S e r i e s M ( 2 N m 1 0 0 0 0 N m ) Benefits/Application For static and dynamic moments Non-rotational construction Very high-cycle fatigue resistant
Benefits/Application. For static and dynamic tensile and compressive forces. Easy assembling, lots of possibilities. Options/Accessories
D a t a s h e e t F o r c e T r a n s d u c e r S e r i e s R F ( 2 5 k N 0 M N ) Benefits/Application For static and dynamic tensile and compressive forces Outstanding overload-tolerance Very high-cycle
Benefits/Application. Very high-cycle fatigue resistant up to 100 % of nominal load. Extremely robust against side forces and bending moments
Data sheet Force transducer Series RF-I (160 kn 4000 kn) Benefits/Application Accuracy class 0,05 For static and dynamic tensile and compressive forces Very high-cycle fatigue resistant up to 100 of nominal
D a t a s h e e t. F o r c e T r a n s d u c e r. S e r i e s K. ( 4 k N k N ) Benefits/Application. Options/Accessories
D a t a s h e e t F o r c e T r a n s d u c e r S e r i e s K ( k N 6 3 0 k N ) Benefits/Application For static and dynamic tensile and compressive forces Hermetically sealed Very small force application
T e c h n i c a l L e x i c o n
T e c h n i c a l L e x i c o n T e r m s f r o m F o r c e a n d t o r q u e m e a s u r e m e n t t e c h n o l o g y a n d G T M d a t a s h e e t s Technisches Lexikon (eng.) 16/10/14 Introduction
TOP Transfer. Data Sheet. Force transfer standard. Special characteristics. D 20.TOPTRANS.10 en
TOP Transfer Force transfer standard Data Sheet Special characteristics Ultimate precision force transducer for international comparative measurements Tensile/compressive force transducer Nominal forces
TOP Transfer. Data sheet. Force transfer standard. Special features. B en
TOP Transfer Force transfer standard Data sheet Special features - Force transducer with ultimate precision for international comparison measurements - Tensile/compressive force transducer - Nominal forces
Z7A. Load cells. Special features. Data sheet. Wiring code
Z7A Load cells Special features - Complies with OIML R60 regulations up to 3000 d - Max. capacities: 500 kg... 10 t - Fulfills EMC requirements in accordance to EN 45 501 - Low transducer height - Robust
Single point load cells
SP4M Single point load cells Special features Maximum capacities: kg 200 kg Aluminum High ratio of minimum verification Offcenter load compensation Shielded connection cable Explosion protection and other
ZF Series Force Transducers
Data Sheet Series Force Transducers FEATURES 1 kn to 00 kn High accuracy For tensile or pressure forces Made of stainless steel Enclosure protection IP 67 DESCRIPTION The force transducers of the series
Industrial Pressure Transmitter
ECT 87 Industrial Pressure Transmitter Swiss based Trafag is a leading international supplier of high quality sensors and monitoring instruments for measurement of and temperature. The economical transmitter
Hydraulic Pressure NAH Applications. Features. New generation available - refer to
NAH 8 Hydraulic Pressure Transmitter New generation available - refer to www.trafag.com/h70 Swiss based Trafag is a leading international supplier of high quality sensors and monitoring instruments for
Level Sensor PanCake PR 6251 and Mounting Kit PR 6051
Level Sensor PanCake PR 6251 and Mounting Kit PR 6051 The space-saving solution for simple applications The sensors of the PR 6251 series have been specially designed for simple weighing of silos and horizontal
Dimensional drawing face mount flange radial. R = bending radius min. 40 mm. Dimensional drawing face mount flange axial
Incremental Encoder DRS/DRS, face mount flange up to 8,2 Dimensional drawing face mount flange radial Incremental Encoder Connector or cable outlet Protection class up to IP s TTL and HTL Zero-Pulse-Teach
Industrial Pressure Transmitter
ECT 87 Industrial Pressure Transmitter Swiss based Trafag is a leading international supplier of high quality sensors and monitoring instruments for measurement of and temperature. The economical transmitter
T20WN. Data Sheet. Torque transducers. Special features. Installation example with bellows couplings. B en
T20WN Torque transducers Data Sheet Special features - Nominal (rated) torques 0.1 N m, 0.2 N m, 0. N m, 1 N m, 2 N m, N m, 10 N m, 20 N m, 0 N m, 100 N m, 200 N m - Accuracy class: 0.2 - Contactless transmission
TF 202 / TF 202-Ex. Field mounted temperature transmitters, FOUNDATION Fieldbus (H1), Pt 100 (RTD), thermocouples, 1 or 2 independent channels
TF 0 / TF 0-Ex Field mounted temperature transmitters, FOUNDATION Fieldbus (H), Pt 00 (RTD), thermocouples, or independent channels 0/-8.69 EN USA Input Resistance thermometer (,, wire circuit) Thermocouples
DS 300. Electronic Pressure Switch. with IO-Link interface. Stainless Steel Sensor. accuracy according to IEC 60770: 0.35 % FSO.
DS 00 Electronic Pressure Switch with IO-Link interface Stainless Steel Sensor accuracy according to IEC 60770: 0.5 % FSO Nominal pressure from 0... 00 mbar up to 0... 600 bar Digital output signal IO-Link
Ring-Torsion Load Cells RTB
Ring-Torsion Load Cells RTB % PTB & OIML approved as suitable for trade use (up to 6000 d and 7500 d in case of multi-divisional scales) % High accuracy, even for very small utilisation ranges (down to
Imformation of C091D series
Imformation of C09D series The QTY of contacts is -pin to -pin, the connection method for the thread type, pinhole connections for welding type, press-fit and PCB type. This series of connectors to prevent
Pressure transmitters for industrial applications MBS 32 and MBS 33
Data sheet Pressure transmitters for industrial applications MBS 32 and MBS 33 The standard pressure transmitters MBS 32 and MBS 33 are designed for use in almost all industrial applications, and offer
DRS 61: Incremental encoders, number of lines and zero pulse width freely programmable DRS 60: Incremental Encoders with Zero-Pulse-Teach
NEW DRS : Incremental encoders, number of lines and zero pulse width freely programmable DRS : s with Zero-Pulse-Teach Further highlights of this generation of encoders: Simple zero-pulse-teach by pressing
TB2. Data Sheet. Torque reference transducer. Special features. B en
T2 Torque reference transducer Data heet pecial features tandard version ptional: rotection I67 - ccuracy class 0.03 - s 100 m, 200 m, 500 m, 1 k m, 2 k m, 3 k m, 5 k m and 10 k m - High permissible oscillation
DMP 331P. Industrial Pressure Transmitter. Process Connections With Flush Welded Stainless Steel Diaphragm
DMP P Industrial Pressure Transmitter Process Connections With Flush Welded Stainless Steel accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 % FSO Nominal pressure from 0... 00 mbar up
NYY-J/-o 34 NYCWY 36 NYCY 37 NAYY 38
NYY-J/-o 34 NYCWY 36 NYCY 37 NAYY 38 NYY-J/-O Energy and control cable acc. to DIN VDE 0276 and HD 603 Application Indoor and outdoor installation, laying in ducts and underground, for power stations,
Load Cells. 3/2 Introduction. 3/3 Mounting components 3/3 Introduction
Siemens AG 2018 /2 Introduction / Mounting components / Introduction /4 Single point load cells /4 Overview /5 SIWAREX WL260 SP-S AA /5 - Load cell /6 SIWAREX WL260 SP-S AB /6 - Load cell /7 SIWAREX WL260
Non-Contact Safety Systems CMS
Selection table for non-contact safety system // Evaluation units Connection Desi Read head contact assembly Assured switch-on distance S ao [mm] Assured switch-on distance S ar [mm] Number of outputs
BTE5000 / PTE5000 / PTU5000 Series Precision differential pressure transmitters
FEATURES 5 mbar to 0 bar, 0. to 50 psi differential pressure...6 or...0 ma Precision temperature compensated and calibrated Rugged aluminium housing Female /8" BSP and /8" NPT fittings MEDIA COMPATIBILITY
Amphenol Amphenol-Tuchel Electronics GmbH. C 091 A/B/D Series. Circular Connectors.
mphenol mphenol-tuchel Electronics GmbH C 09 //D Series Circular Connectors www.industrial-amphenol.com Note from the CEO Ladies and Gentlemen, For over years mphenol has enjoyed success as the interconnection
Load Washers. Force kn until kn. Type 9101A A
Force Load Washers 0... 20 kn until 0... 700 kn Type 9101A... 9107A Force sensor for measuring quasistatic and dynamic forces in industrial monitoring tasks. F z The force sensors are delivered uncalibrated
DMP 331. Industrial Pressure Transmitter for Low Pressure. Stainless Steel Sensor
DMP Industrial Pressure Transmitter for Low Pressure Stainless Steel Sensor accuracy according to IEC 60770: : 0.5 % FSO option: 0.5 / 0. % FSO Nominal pressure from 0... 00 mbar up to 0... 60 bar Output
HVM 061 Page 1/4 Elektrohydraulic Servovalves Typ HVM 061 Symbol A B P T L Special features: high reliability easy service robust construction high dy
HVM 6 Page /4 Elektrohydraulic Servovalves Typ HVM 6 Symbol A B P T L Special features: high reliability easy service robust construction high dynamic response relatively insensitive to contamination variable
Load Washers. Force. for Forces of 7, kn. F z. Type 9001A A 9081B, 9091B
Force Load Washers for Forces of 7,5... 1 200 kn Type 9001A... 9071A 9081B, 9091B 1-component force sensor for measuring dynamic and quasistatic forces in z direction. F z Calibrated measuring range 100
D5.2 Type. Draw wire mechanics with incremental encoder. Measuring length max. 2 m. Compact and simple. Order code draw wire encoder
with incremental encoder Draw wire encoder A40 Traverse speed max. 0.8 m/s The draw wire system A40 with incremental encoder excels with its compact construction. RoHS Compact and simple Measuring length
Amphenol. Amphenol-Tuchel Electronics GmbH. Circular Connectors C 091 A/B/D Series
Amphenol Amphenol-Tuchel Electronics GmbH Circular Connectors C 09 A/B/D Series The Company Amphenol-Tuchel Electronics GmbH is a member of the USA based Amphenol Corporation. With our own global presence
Amphenol C 091 A/B/D. Circular Connectors. Amphenol-Tuchel Electronics GmbH
Amphenol C 091 A/B/D Circular Connectors Amphenol-Tuchel Electronics GmbH General information These connectors are designed and produced in conformity with the low-voltage directive (/3/EWG) respectively
TF 212 / TF 212-Ex. Field mounted temperature transmitters, PROFIBUS PA, Pt 100 (RTD), thermocouples, 1 or 2 independent channels 10/11-8.
TF / TF -Ex Field mounted temperature transmitters, PROFIBUS PA, Pt 00 (RTD), thermocouples, or independent channels 0/-8.70 EN P R O F I PROCESS FIELD BUS B U S Input Resistance thermometer (,, -wire
INVESTIGATION OF THE CALIBRATION CAPABILITIES OF A 1 KN M AND 10 KN M REFERENCE CALIBRATION MACHINE
IMEKO 23 rd TC3, 13 th TC5 and 4 th TC22 International Conference 30 May to 1 June, 2017, Helsinki, Finland INVESTIGATION OF THE CALIBRATION CAPABILITIES OF A 1 KN M AND 10 KN M REFERENCE CALIBRATION MACHINE
Operating limits and tolerances of platinum resistance thermometers per EN 60751: 2008
Technical information Operating limits and tolerances of platinum resistance thermometers per EN 60751: 2008 WIKA data sheet IN 00.17 General information Temperature is a measurement for the thermal state
Load cell. Special features. Data sheet
Z6 Load cell Special features - Welded on metal bellows - (rated) loads: 5 kg 1 t - Load cells and installation aids made of rust resistant materials - Verifiable up to 6000 divisions, test report as per
Electric amplifiers. RE 30044/02.12 Replaces: Type VT-VRPA X/V0/RTS-2STV. Component series 2X 1/8
Electric amplifiers RE 30044/02.12 Replaces: 11.02 1/8 Type VT-VRPA1-527-2X/V0/RTS-2STV Component series 2X Table of contents Contents Page Features 1 Ordering code, accessories 2 Front plate 2 Block diagram
Rail Guide Modular Linear Actuators DSM
Roller Guide Modular Linear Actuators DLM, DLVM Rail Guide Modular Linear Actuators DSM nookindustries.com toll-free (800) 32-7800 25 DLM 20, 60, 200 Linear Motor Drive Specifications Function: This unit
Incremental Rotary Encoder G58
Shaft: Type S / L / H Hollow shaft: Type W Mechanical Data Housing diameter: mm Shaft:... 0 mm Hollow shaft:... mm Line counts:... 0.000 signals: S, KI, KS, HTL, TTL, O, Vpp, µapp onnector or output: axial
DATA SHEET. Thermocouple module with digital I²C-Interface - THMOD-I²C. Characteristic features. Areas of application. Features.
Description Characteristic features Industrial temperature measuring method Wide measuring range, -270...+1360 C Digital I²C-interface Simple integration to micro-controller Scope of supply with thermocouple,
Absolute encoders multiturn
elektronischer electronic multiturn, Multiturn, magnetic magnetisch Sendix M66 / M68 (shaft / hollow shaft) The Sendix M6 with Energy Harvesting Technology is an electronic multiturn encoder in miniature
SKA COMPACT. ALL IN ONE Linear Axes
SKA COMPACT ALL IN ONE Linear Axes Cutting-edge all in one linear axis based on iron core technology. A range of three sizes with aluminium carrying structure. The power components, moving coil and magnetic
DS 200 DS 200 DRUCK & TEMPERATUR LEITENBERGER GMBH. Electronic Pressure Switch. Stainless Steel Sensor. Electronic Pressure Switch
DRUCK & TEMPERATUR LEITENBERGER GMBH DS 00 Electronic Pressure Switch Stainless Steel Sensor accuracy according to IEC 00: standard: 0. % FSO option: 0. % FSO Nominal pressure: from 0... 00 mbar up to
FLOW SENSOR FOR LIQUID MEDIA Serie 210
FLOW SENSOR FOR LIQUID MEDIA Serie 0 Flow range 0.... 0 l/min Nominal diameters DN 6 / 8 / 0 / / 0 / Temperature measurement -0... + ÀC In comparison to the OEM flow sensor (type 00), the type 0 is available
SCTP20 Programmable 2-Wire Temperature Transmitter, Head Mount
20 Programmable 2-Wire Temperature Transmitter, Head Mount Configurable Transmitters Description Each 20 2-wire transmitter is designed for measuring temperature using thermocouples or RTDs. The input
OEM Flow sensor for liquid media type 200
OEM Flow sensor for liquid media type 200 Flow range 0.5... 150 l/min Nominal diameters DN 6 / 8 / 10 / 15 / 20 / 25 Temperature measurement -40... +125 ÀC The flow sensor type 200 is based on the Kármán
TEMPERATURE AND HUMIDITY DEPENDENCE ON STABILITY OF TORQUE MEASURING DEVICES Tassanai Sanponpute and Nittaya Arksonnarong
IMEKO 22 nd TC3, 15 th TC5 and 3 rd TC22 International Conferences 3 to 5 February, 2014, Cape Town, Republic of South Africa TEMPERATURE AND HUMIDITY DEPENDENCE ON STABILITY OF TORQUE MEASURING DEVICES
ISA-PLAN - Präzisionswiderstände precision resistors Typ / type BVS
ISA-PLAN - Präzisionswiderstände precision resistors Typ / type BVS Technische Daten / technical data Widerstandswerte resistance values 0.3, 0.5, 1, 2, 3 mohm Toleranz tolerance 1 %, 2 %, 5 % Temperaturkoeffizient
Pressure Transmitter ED 701
Pressure Transmitter ED 701 Hygienic and industrial process connections Zero setting function Accuracy < 0.1% FS Quick response time < 25 ms High long-term stability Excellent repeatability Active compensation
AC axial compact fan
ebm-papst Mulfingen GmbH & Co. KG Bachmühle D-767 Mulfingen Phone +9 798 8- Fax +9 798 8- info@de.ebmpapst.com www.ebmpapst.com Limited partnership Headquarters Mulfingen County court Stuttgart HRA 59
Flow sensor for liquid media type 210
Flow sensor for liquid media type 0 Flow range 0.... 0 l/min Nominal diameters DN 6 / 8 / 0 / / 0 / Temperature measurement -0... + ÀC In comparison to the OEM flow sensor (type 00), the type 0 is available
EC 60 TM 200W 48V. with brushless drive. brushless small & compact maintenance-free Protection IP65. Ordering Data
EC-Servo motors with brushless drive EC 0 TM 200W 48V brushless small & compact maintenance-free Protection IP Ordering Data characteristics permanently energized -phase synchronous motor incremental position
AIR PREPARATION. ELECTRONICALLY CONTROLLED PRESSURE REGULATING VALVE (PROPORTIONAL PRESSURE REGULATING VALVE) SERIES control
AIR PREPARATION ELECTRONICALLY CONTROLLED PRESSRE REGLATING ALE (PROPORTIONAL PRESSRE REGLATING ALE) SERIES control Description Abb. Port size Recommended Type Data Sheet No. flow (l/min)* airfit tecno
Installation guide 862 MIT / MIR
Installation guide 862 MIT / MIR in combination with: 864 MTT or 863 MRT or (dual) spot element November 2005 Part no. 4416.232_Rev3 Enraf BV PO Box 812 2600 AV Delft Netherlands Tel. : +31 15 2701 100
Check-Q-meter. Table of contents. Features. Functions. RE 27551/ /10 Replaces: Type FD
Check-Q-meter RE /0.0 /0 Replaces: 09.9 Type FD Nominal size... Series ax. Operating pressure 0 bar ax. Flow 0 l/min K9/ Table of contents Contents Page Features Functions Ordering details Symbols Functional
RoHS. Versatile. X g. X 2 e
s IN8, - and The inclinometers of the IN8 series allow measuring inclinations in the range of ±85 or -dimensional inclinations up to 0. With their high robustness, their protection level up to max. IP9k
Usage limitations and accuracies of platinum resistance thermometers (DIN EN 60751:2009) in industrial applications
Technical information Usage limitations and accuracies of platinum resistance thermometers (DIN EN 60751:2009) in industrial applications WIKA data sheet IN 00.17 General information Temperature is a measurement
Linear measuring technology
Their extremely robust construction, their high IP69k protection level and their wide temperature range make these new draw wire encoders particularly reliable and durable. Their flexibility and adaptability
Preliminary Product Information. LIC 4000 Series Exposed Absolute Linear Encoders
Preliminary Product Information LIC 4000 Series Exposed Absolute Linear Encoders April 2009 LIC 4000 Series Exposed absolute linear encoders Measuring lengths up to 27 m Measuring steps to 0.001 µm (1
DS 200P. Electronic Pressure Switch. Pressure Ports And Process Connections With Flush Welded Stainless Steel Diaphragm
Pressure Ports And Process Connections With Flush Welded Stainless Steel Diaphragm accuracy according to IEC 600: standard: 0. % FSO option: 0. % FSO Nominal pressure from 0... 00 mbar up to 0... 0 bar
Metallized PPS Capacitors for extreme capacitance stability. 1 min / 23 C B
Replaces CKM 501 B series Applications & Characteristics Railway signalling High-temperature (125 C) High capacitance stability Harmonized circuits Filtering High-reliability circuits Security applications
Amphenol. Amphenol-Tuchel Electronics GmbH. Series C 146 Heavy Duty Connectors Core Programme
Amphenol Amphenol-Tuchel Electronics GmbH Series C 146 Heavy Duty Connectors Core Programme The Company General information These connectors are designed and produced in conformity with the voltage directive
DMP 331Pi. Precision Pressure Transmitter. pressure ports and process connections with flush welded stainless steel diaphragm
DMP Pi Precision Pressure Transmitter pressure ports and process connections with flush welded stainless steel diaphragm accuracy according to IEC 600: 0, % FSO Nominal pressure from 0... 00 mbar up to
Best color perception in spotlighting and downlighting
Best color perception in spotlighting and downlighting Benefits Best color perception for vivid white and colors in shop lighting (even compared to HID solutions) New OSRAM true color technology optimized
Size A DIN EN
Size A DIN EN 70-0 Actuators 0 series DIN EN 70-0 +, + ow and high housing Degree of protection IP6 Wired versions Moulded versions Degree of protection IP67 Contacts Thread Cable outlet Ordering-No. Female
Temperature Measurement
Temperature Measurement 157 12 Precise and reliable measurements even in aggressive liquids all probes are encapsulated with PTFE for maximum chemical resistance. PRODUCT TIPS Page 161: 143 PT100 Temperature
Type UB1 Load Cell. Option Stainless steel cable gland
Type UB1 Load Cell IP68 APPROVED Product Description Type UB1 is a stainless steel universal load cell which allows for tension and compression loading. Its complete hermetic sealing makes it suitable
PRODUCT SPECIFICATIONS
FEATURES AND BENEFITS* Up to 14 year DC life 56V DC working voltage Resistive cell balancing Overvoltage outputs High power density 4U, half-rack package UL registered TYPICAL APPLICATIONS UPS systems
OEM Flow sensor for liquid media type 200
OEM Flow sensor for liquid media type 200 Flow range 0.5... 150 l/min Nominal diameters DN 6 / 8 / 10 / 15 / 20 / 25 Temperature measurement -40... +125 ÀC The flow sensor type 200 is based on the ármán
DMP 331Pi. Precision Pressure Transmitter. pressure ports and process connections with flush welded stainless steel diaphragm
DMP Pi Precision Pressure Transmitter pressure ports and process connections with flush welded stainless steel diaphragm accuracy according to IEC 600: 0, % FSO Nominal pressure from 0... 00 mbar up to
K04 TYPE -40 C +85 C 20000H
K04 TYPE -40 C +85 C 20000H Extended life. Surge-proof capacitor in aluminium can with insulation sleeve. To be mounted with ring clips or with threaded stud. Designed for high resistances to voltage spikes.
AC axial fan. Limited partnership Headquarters Mulfingen Amtsgericht (court of registration) Stuttgart HRA
ebm-papst Mulfingen GmbH & Co. KG Bachmühle D-767 Mulfingen Phone +9 798 8-0 Fax +9 798 8-0 info@de.ebmpapst.com www.ebmpapst.com Limited partnership Headquarters Mulfingen Amtsgericht (court of registration)
MEASUREMENT UNCERTAINTY OF ROTATING TORQUE TRANSDUCERS WHEN USED IN PARTIAL LOAD RANGES
XVIII IMEKO WORLD CONGRESS Metrology for a Sustainable Development September, 17, 006, Rio de Janeiro, Brazil MEASUREMENT UNCERTAINTY OF ROTATING TORQUE TRANSDUCERS WHEN USED IN PARTIAL LOAD RANGES Georg
EA-10/14. EA Guidelines on the Calibration of Static Torque Measuring Devices. Publication Reference PURPOSE
Publication Reference EA-10/14 EA Guidelines on the Calibration of Static Torque Measuring Devices PURPOSE This document has been produced by EA to improve harmonisation in determining the calibration
KMT32B Magnetic Angle Sensor
TDFN SO8 SM8 AMR Sensor with 80 period for the use at moderate field strengths high accuracy tiny TDFN package various packages available DESCRIPTION The KMT3B is a magnetic field sensor based on the anisotropic
BTEL5000 / PTUL5000 Series Precision very low differential pressure transmitters
FETURES to, to differential pressure...6 or... m Precision temperature compensated and calibrated Rugged aluminium housing Female /8" BSP and /8" NPT fittings MEDI CMPTIBILITY Pressure inlet: Non-corrosive,
Guidelines on the Calibration of Static Torque Measuring Devices
European Association of National Metrology Institutes Guidelines on the Calibration of Static Torque Measuring Devices EURAMET/cg-14/v.01 Previously EA-10/14 July 2007 Calibration Guide EURAMET/cg-14/v.01
KM-70 Panel-mounting Thermostat
KM-70 Panel-mounting Thermostat B 60.2045.0 Operating Instructions 2008-10-24/00073778 Please read these Operating Instructions before commissioning the instrument. Keep the manual in a place that is accessible
MANUFACTURE OF STRAIN GAUGES & TRANSDUCERS
MANUFACTURE OF STRAIN GAUGES & TRANSDUCERS We produce sensors fitted with semiconductor or metal strain gauges for measuring forces, mass, pressure, torque, acceleration. We supply semiconductor silicon
MANUFACTURE OF STRAIN GAUGES & TRANSDUCERS
MANUFACTURE OF STRAIN GAUGES & TRANSDUCERS We produce sensors fitted with semiconductor or metal strain gauges for measuring forces, mass, pressure, torque, acceleration. We supply semiconductor silicon
W 9 L: Laser photoelectric switches: small, light and reliable
W 9 Laser photoelectric switches Photoelectric proximity switches, BGS Photoelectric reflex switches Through-beam photoelectric switches W 9 L: Laser photoelectric switches: small, light and reliable The
Silicon Temperature Sensors KT 100 KT 110 KT 130 KT 210 KT 230. KTY 11-x KTY 13-x KTY 21-x KTY 23-x KTY 19-6 KTY 16-6
Silicon Temperature Sensors KT 100 KT 110 KT 130 KT 210 KT 230 KTY 16-6 KTY 10-x KTY 11-x KTY 13-x KTY 21-x KTY 23-x KTY 19-6 Features Temperature dependent resistor with positive temperature coefficient
INSULATORS INSULATORS
INSULATORS INSULATORS INSULATORS CONTENTS > INDOOR INSULATORS 0 /02 Post Insulators 03 /04/0 Capacitive Divider Insulators 0 Wall Bushings /07 08 Bolt Bushings /0 GENERAL INFORMATION ON INSULATORS Rated
KMT32B Magnetic Angle Sensor
TDFN SO8 AMR Sensor with 80 period high accuracy high resolution for the use at moderate field strengths tiny TDFN package ROHS & REACH compliant DESCRIPTION The KMT3B is a magnetic field sensor based
S95.3U01 / S95.3U11. Head mounted temperature transmitters, programmable, Pt 100 (RTD), thermocouples, electrical isolation
S95.U0 / S95.U Head mounted temperature transmitters, programmable, Pt 00 (RTD), thermocouples, electrical isolation Resistance thermometer (,, wire circuit) Thermocouples Resistance remote signalling
AC axial compact fan
ebm-papst Mulfingen GmbH & Co. KG Bachmühle D-7467 Mulfingen Phone +49 798 8-0 Fax +49 798 8-0 info@de.ebmpapst.com www.ebmpapst.com Limited partnership Headquarters Mulfingen County court Stuttgart HRA
Surface-mounting thermostats Series ATH
JUMO GmbH & Co. KG Delivery address:mackenrodtstraße 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 E-mail: mail@jumo.net Internet: www.jumo.net
Flow sensor for liquid media type 230
Flow sensor for liquid media type 0 Flow range.8... 0 l/min Nominal diameters DN 0 / / 0 / Temperature measurement -0... + ÀC The flow sensor type 0 is based on the Kármán vortex trail. You can choose
OEM Flow sensor type 235 for liquid media
OEM Flow sensor type 235 for liquid media Flow range 0.9... 240 l/min Nominal diameters DN 8 / 10 / 15 / 20 / 25 / 32 Temperature measurement -40... +125 ÀC The type 235 is based on the type 200 but incorporates
PHOENIX CONTACT - 04/2016. Features
Signal conditioner Data sheet 100238_de_06 1 Description PHOENIX CONTACT - 04/2016 Features The MCR-C-UI-UI(-450)-DCI(-NC) 3-way isolation amplifier is used to electrically isolate and convert analog signals.
ABB SpA COMEM Operating Unit Strada Regionale 11, Signolo Montebello Vicentino (VI) - ITALY
ABB SpA COMEM Operating Unit Strada Regionale 11, Signolo 22 36054 Montebello Vicentino (VI) - ITALY www.abb.com/transformercomponents The information contained in this document is for general information
ED 701 General Industry Pressure Transmitter
ED 701 General Industry Pressure Transmitter Standard industrial process connections Complete range of electrical connections 4... 20 ma and Voltage outputs Accuracy: 0.1%, 0.2% and 0.4% FS Quick response
Turbine Meter TRZ 03 PRODUCT INFORMATION. Reliable Measurement of Gas
Turbine Meter TRZ 0 PRODUCT INFORMATION Reliable Measurement of Gas TURBINE METER TRZ 0 Method of operation, Construction Method of operation The TRZ 0 turbine meter is a flow meter suitable for gas measurement
Welcome. Functionality and application of RTD Temperature Probes and Thermocouples. Dipl.-Ing. Manfred Schleicher
Welcome Functionality and application of RTD Temperature Probes and Thermocouples Dipl.-Ing. Manfred Schleicher This presentation informs about the basics of RTD Temperature Probes and thermocouples Functionality
UNI EN ISO 9001:2008 UNI EN ISO 14001:2004 BS OHSAS 18001:2007 EC DIRECTIVE 2014/34/EU (ATEX) CERTIFIED MANAGEMENT SYSTEM
EN ISM-BSM CERTIFIED Technology Made in Italy Since 1955 the Varvel Group has been making speed reducers and variators for light industry applications. Reliable partner in power transmission equipment
Servomotors Order Catalog. LSP-Servomotors with optional planetary gearbox Stall torque 0.18 to 110 Nm
Servomotors Order Catalog LSP-Servomotors with optional planetary gearbox Stall torque 0.8 to 0 Nm Order Catalogue LSP Servomotors ID no.: 08.8B.-0 Date: 0/07 Subject to technical change without notice.