TOP Transfer. Data Sheet. Force transfer standard. Special characteristics. D 20.TOPTRANS.10 en
|
|
|
- Lindsey Watson
- 5 years ago
- Views:
Transcription
1 TOP Transfer Force transfer standard Data Sheet Special characteristics Ultimate precision force transducer for international comparative measurements Tensile/compressive force transducer Nominal forces 100 N kn Excellent rel. reproducibility and repeatability errors Good long-term stability Nominal force Order number TOP Z N 200 N 500 N 1 kn 2 kn 5 kn 10 kn TOP Z30/100 N TOP Z30/200 N TOP Z30/500 N TOP Z30/1000 N TOP Z30/2 kn TOP Z30/5 kn TOP Z30/10 kn TOP Z4A 20 kn 50 kn 100 kn 200 kn 500 kn TOP Z4A/20 kn TOP Z4A/50 kn TOP Z4A/100 kn TOP Z4A/200 kn TOP Z4A/500 kn
2 ompressive force specifications TOP-Z30 TOP-Z4A Data according to VDI standards 2638 Nominal force F nom kn Nominal sensitivity nom mv/v 2 2 rel. sensitivity deviation d c % rel. tensile/compressive force sensitivity diff. d zd % Zero signal tolerance rel. zero point compensation (zero signal return) 1) Rel. range (0.2F nom to F nom ) at: 1) d s,o f o mv/v % unchanged mounting position b i % different mounting positions b ompressive force Tensile force % % Rel. range of inversion (0.2F nom to F nom ) 1) u % ) ubic interpolation error (0.2F nom to F nom ) 1) f c % Effect of temperature/10k by reference to nominal sensitivity on sensitivity on zero signal TK c % TK 0 % Effect of transverse forces (transverse forces 10% F nom ) 2) d Q % Effect of eccentricity per mm d E % Rel. creep over 20 min d crf+e % Input resistance R e Ω >345 >690 >345 Output resistance R a Ω " Isolation resistance R is Ω > > Reference excitation voltage U ref V 5 5 Operating range of the excitation voltage U,G V Nominal temperature range t,nom Operating temperature range t,g Storage temperature range t,s Reference temperature t ref +22 Max. operational force (F G ) % Limit force (F L ) % reaking force (F ) % Static lateral limit force (F Q ) % Rel. permissible vibrational stress F rb % Plug connection Radial and axial encl. connector (male) inder o. Series 723 able length, six-wire connection m 6 Degree of protection to DIN EN IP50 IP 67 TOP-Z30 TOP-Z4A Nominal force F nom kn Limit torque M G Nm Nominal displacement S nom mm t0.4 approx Fundam. resonance frequ. f G khz Weight kg approx. 0.9 approx ) Specifications to EN or ISO376 2) applies in the case of the TOP-Z4A half pin height 3) in the case of tensile force TOP Z4A/500 kn: 0.07% TOP Transfer force transducers are available only in connection with a DKD calibration acc. to EN or ISO 376 (not supplied). Order no.: K AL FD... HM 2
3 TOP-Z30 Dimensions (in mm) 100 N... 1 kn Male connector with protecting cap 2kN... 10kN Male connector 7-pin Male connector 7-pin with protecting cap Angle variable according to mounting Male connector 7-pin TOP-Z4A Dimensions (in mm) Tapped hole for carrying handle (2x180 ) M8 x 12 deep 50 long Size ( octagonal ) / Order no. j A j f7 D E F G H J K L M N R j S f7 T j U V X a./f. TOP-Z4A/20kN M TOP-Z4A/50kN M20x TOP-Z4A/100kN M30x TOP-Z4A/200kN M6 6 M39x TOP-Z4A/500kN M M72x HM
4 Accessories for TOP-Z30 Force introduction parts for tensile loading Knuckle eyes ZGW/ZGUW Tensile force introduction ZKM acc. to DIN EN , ISO 376 D f a W Upper/lower knuckle eyes Order number a f W j TOP-Z30/100N 1000N 1 U1R/200kg/ZGW H7 TOP-Z30/2kN 10kN 1 U2A/1t/ZGUW H7 ZKM Order number min max jd TOP-Z30/2kN 10kN 1 Z30/10kN/ZKM Load button for compressive loading nominal load 100 N 1 kn nominal load 2 kn 10 kn all R D "0,1 D 0,1 0,8 A E all R A E Load button A D E R TOP-Z30/100N 1000N 1 U1R/200kg/ZL 8 15 M TOP-Z30/2kN 10kN M HM 4
5 Accessories for TOP-Z30 Thrust piece EDO4/EDO3 F 45 o groove 5 x 0.5 deep D A α View from below E Thrust piece Weight (kg) j A j D E F a TOP-Z30/100 N 1000 N EDO3/1 kn approx o TOP-Z30/2 kn 10 kn EDO4/50 kn o arrying case for 4 TOP-Z30 force transducers and accessories, Order no.: 1 Z30/OX Size: 440 x 320 x 147mm Accessories (not supplied): onnection cable TOP-Z30 inder female cable connector and pigtails (6m) Order number: 1 KA139A 6 5 HM
6 Accessories for TOP-Z4A Force introduction parts to DIN EN resp. ISO 376 F 45 o EDO4 Tensile force introduction ZKM D A groove 5 x 0.5 deep cut according to hardness E D α Thrust piece Order no. Weight (kg) j A j D E F a TOP-Z4A/20kN 1 EDO4/20kN TOP-Z4A/50kN 1 EDO4/50kN TOP-Z4A/100kN 1 EDO4/100kN 30.2 TOP-Z4A/200kN 1 EDO4/200kN TOP-Z4A/500kN 1 EDO4/500kN o o ZK Order no. Weight (kg min max D TOP-Z4A/20kN 1 Z4/20kN/ZKM TOP-Z4A/50kN 1 Z4/50kN/ZKM TOP-Z4A/100kN 1 Z4/100kN/ZKM TOP-Z4A/200kN 1 Z4/200kN/ZKM TOP-Z4A/500kN 1 Z4/500kN/ZKM HM 6
7 Accessories for TOP-Z4A Knuckle eyes ZGOW/ZGUW W f a TOP-Z4A/20 kn TOP-Z4A/50 kn TOP-Z4A/100 kn TOP-Z4A/200 kn TOP-Z4A/500 kn Upper knuckle eye a f Weight Lower knuckle eye (kg) min max min max Order no. approx. approx. approx. approx. 1 Z4/20kN/ZGOW 1 Z4/20kN/ZGUW 1 U2A/2t/ZGOW 1 U2A/2t/ZGUW 1 Z4/100kN/ZGOW 1 Z4/100kN/ZGUW 1 U2A/10t/ZGOW 1 U2A/10t/ZGUW 1 Z4/500kN/ZGOW 1 Z4/500kN/ZGUW W M A (Nm) H H H ) ) 1) secured with 2 screws to prevent rotation; underside with inner thread 2) for pivot side only (outer thread) Pin assignment for the TOP-Z4A and TOP-Z30 (for connection cable KA139A 6) wh (white) bk (black) rd (red) bl (blue) gn (green) gy (gray) Shield Measurement signal (+) U A Excitation voltage ( ) U Measurement signal ( ) U A Excitation voltage (+) U Sensor circuit (+) Sensor circuit ( ) able shielding, connected to housing Pin on inder male connector (no function) TOP-Z30 Top view HM
8 We reserve the right to modify products without prior notice. All product descriptions are for general information only. They are not to be understood as express warranty and do not constitute any liability whatsoever. Hottinger aldwin Messtechnik GmbH Postfach , D Darmstadt Im Tiefen See 45, D Darmstadt Tel.: +49/ 61 51/ ; Fax: +49/ 61 51/ support@hbm.com
TOP Transfer. Data sheet. Force transfer standard. Special features. B en
TOP Transfer Force transfer standard Data sheet Special features - Force transducer with ultimate precision for international comparison measurements - Tensile/compressive force transducer - Nominal forces
Z7A. Load cells. Special features. Data sheet. Wiring code
Z7A Load cells Special features - Complies with OIML R60 regulations up to 3000 d - Max. capacities: 500 kg... 10 t - Fulfills EMC requirements in accordance to EN 45 501 - Low transducer height - Robust
T20WN. Data Sheet. Torque transducers. Special features. Installation example with bellows couplings. B en
T20WN Torque transducers Data Sheet Special features - Nominal (rated) torques 0.1 N m, 0.2 N m, 0. N m, 1 N m, 2 N m, N m, 10 N m, 20 N m, 0 N m, 100 N m, 200 N m - Accuracy class: 0.2 - Contactless transmission
TB2. Data Sheet. Torque reference transducer. Special features. B en
T2 Torque reference transducer Data heet pecial features tandard version ptional: rotection I67 - ccuracy class 0.03 - s 100 m, 200 m, 500 m, 1 k m, 2 k m, 3 k m, 5 k m and 10 k m - High permissible oscillation
Benefits/Application. Very high-cycle fatigue resistant up to 100 % of nominal load. Extremely robust against side forces and bending moments
Data sheet Force transducer Series RF-I (160 kn 4000 kn) Benefits/Application Accuracy class 0,05 For static and dynamic tensile and compressive forces Very high-cycle fatigue resistant up to 100 of nominal
D a t a s h e e t. F o r c e T r a n s d u c e r. S e r i e s K. ( 4 k N k N ) Benefits/Application. Options/Accessories
D a t a s h e e t F o r c e T r a n s d u c e r S e r i e s K ( k N 6 3 0 k N ) Benefits/Application For static and dynamic tensile and compressive forces Hermetically sealed Very small force application
Benefits/Application. For static and dynamic tensile and compressive forces. Easy assembling, lots of possibilities. Options/Accessories
D a t a s h e e t F o r c e T r a n s d u c e r S e r i e s R F ( 2 5 k N 0 M N ) Benefits/Application For static and dynamic tensile and compressive forces Outstanding overload-tolerance Very high-cycle
BSD MODULFLEX R Torsionally Rigid Couplings
BSD MODULFLEX R Torsionally Rigid Couplings for T1F Torque Flange View B Thread opening turned in sectionel plane b b 6 b 7 b 2 b 8 b 3 b za View A A B NVm 1 NVm View A btot Reference dimension X X 2 NVm
ZF Series Force Transducers
Data Sheet Series Force Transducers FEATURES 1 kn to 00 kn High accuracy For tensile or pressure forces Made of stainless steel Enclosure protection IP 67 DESCRIPTION The force transducers of the series
Benefits/Application. Very high-cycle fatigue resistant up to 80 % of nominal load. Easy assembling, lots of possibilities. Options/Accessories
D a t a s h e e t T o r q u e T r a n s d u c e r S e r i e s M ( 2 N m 1 0 0 0 0 N m ) Benefits/Application For static and dynamic moments Non-rotational construction Very high-cycle fatigue resistant
D a t a s h e e t. T o r q u e s t a n d a r d. S e r i e s D m - T N. ( 1 N m N m ) Benefits/Application. Options/Accessories
D a t a s h e e t T o r q u e s t a n d a r d S e r i e s D m - T N ( 1 N m 0 0 0 0 N m ) Benefits/Application Class VN (better class 0,05 acc. DIN 51309) For highest precision requirements Easy adaption
Single point load cells
SP4M Single point load cells Special features Maximum capacities: kg 200 kg Aluminum High ratio of minimum verification Offcenter load compensation Shielded connection cable Explosion protection and other
Load cell. Special features. Data sheet
Z6 Load cell Special features - Welded on metal bellows - (rated) loads: 5 kg 1 t - Load cells and installation aids made of rust resistant materials - Verifiable up to 6000 divisions, test report as per
Dimensional drawing face mount flange radial. R = bending radius min. 40 mm. Dimensional drawing face mount flange axial
Incremental Encoder DRS/DRS, face mount flange up to 8,2 Dimensional drawing face mount flange radial Incremental Encoder Connector or cable outlet Protection class up to IP s TTL and HTL Zero-Pulse-Teach
D5.2 Type. Draw wire mechanics with incremental encoder. Measuring length max. 2 m. Compact and simple. Order code draw wire encoder
with incremental encoder Draw wire encoder A40 Traverse speed max. 0.8 m/s The draw wire system A40 with incremental encoder excels with its compact construction. RoHS Compact and simple Measuring length
DS 300. Electronic Pressure Switch. with IO-Link interface. Stainless Steel Sensor. accuracy according to IEC 60770: 0.35 % FSO.
DS 00 Electronic Pressure Switch with IO-Link interface Stainless Steel Sensor accuracy according to IEC 60770: 0.5 % FSO Nominal pressure from 0... 00 mbar up to 0... 600 bar Digital output signal IO-Link
DMP 331. Industrial Pressure Transmitter for Low Pressure. Stainless Steel Sensor
DMP Industrial Pressure Transmitter for Low Pressure Stainless Steel Sensor accuracy according to IEC 60770: : 0.5 % FSO option: 0.5 / 0. % FSO Nominal pressure from 0... 00 mbar up to 0... 60 bar Output
DRS 61: Incremental encoders, number of lines and zero pulse width freely programmable DRS 60: Incremental Encoders with Zero-Pulse-Teach
NEW DRS : Incremental encoders, number of lines and zero pulse width freely programmable DRS : s with Zero-Pulse-Teach Further highlights of this generation of encoders: Simple zero-pulse-teach by pressing
Absolute encoders multiturn
elektronischer electronic multiturn, Multiturn, magnetic magnetisch Sendix M66 / M68 (shaft / hollow shaft) The Sendix M6 with Energy Harvesting Technology is an electronic multiturn encoder in miniature
DMP 331P. Industrial Pressure Transmitter. Process Connections With Flush Welded Stainless Steel Diaphragm
DMP P Industrial Pressure Transmitter Process Connections With Flush Welded Stainless Steel accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 % FSO Nominal pressure from 0... 00 mbar up
T e c h n i c a l L e x i c o n
T e c h n i c a l L e x i c o n T e r m s f r o m F o r c e a n d t o r q u e m e a s u r e m e n t t e c h n o l o g y a n d G T M d a t a s h e e t s Technisches Lexikon (eng.) 16/10/14 Introduction
Load Washers. Force. for Forces of 7, kn. F z. Type 9001A A 9081B, 9091B
Force Load Washers for Forces of 7,5... 1 200 kn Type 9001A... 9071A 9081B, 9091B 1-component force sensor for measuring dynamic and quasistatic forces in z direction. F z Calibrated measuring range 100
Load Washers. Force kn until kn. Type 9101A A
Force Load Washers 0... 20 kn until 0... 700 kn Type 9101A... 9107A Force sensor for measuring quasistatic and dynamic forces in industrial monitoring tasks. F z The force sensors are delivered uncalibrated
DMP 331Pi. Precision Pressure Transmitter. pressure ports and process connections with flush welded stainless steel diaphragm
DMP Pi Precision Pressure Transmitter pressure ports and process connections with flush welded stainless steel diaphragm accuracy according to IEC 600: 0, % FSO Nominal pressure from 0... 00 mbar up to
DS 200P. Electronic Pressure Switch. Pressure Ports And Process Connections With Flush Welded Stainless Steel Diaphragm
Pressure Ports And Process Connections With Flush Welded Stainless Steel Diaphragm accuracy according to IEC 600: standard: 0. % FSO option: 0. % FSO Nominal pressure from 0... 00 mbar up to 0... 0 bar
Pressure transmitters for industrial applications MBS 32 and MBS 33
Data sheet Pressure transmitters for industrial applications MBS 32 and MBS 33 The standard pressure transmitters MBS 32 and MBS 33 are designed for use in almost all industrial applications, and offer
Applying the Wheatstone Bridge Circuit
Applying the Wheatstone Bridge Circuit by Karl Hoffmann W1569-1.0 en Applying the Wheatstone Bridge Circuit by Karl Hoffmann Contents: 1 Introduction...1 2 Elementary circuits with strain gages...5 2.1
ED 701 General Industry Pressure Transmitter
ED 701 General Industry Pressure Transmitter Standard industrial process connections Complete range of electrical connections 4... 20 ma and Voltage outputs Accuracy: 0.1%, 0.2% and 0.4% FS Quick response
Level Sensor PanCake PR 6251 and Mounting Kit PR 6051
Level Sensor PanCake PR 6251 and Mounting Kit PR 6051 The space-saving solution for simple applications The sensors of the PR 6251 series have been specially designed for simple weighing of silos and horizontal
DMP 331Pi. Precision Pressure Transmitter. pressure ports and process connections with flush welded stainless steel diaphragm
DMP Pi Precision Pressure Transmitter pressure ports and process connections with flush welded stainless steel diaphragm accuracy according to IEC 600: 0, % FSO Nominal pressure from 0... 00 mbar up to
Industrial Pressure Transmitter
ECT 87 Industrial Pressure Transmitter Swiss based Trafag is a leading international supplier of high quality sensors and monitoring instruments for measurement of and temperature. The economical transmitter
W 9 L: Laser photoelectric switches: small, light and reliable
W 9 Laser photoelectric switches Photoelectric proximity switches, BGS Photoelectric reflex switches Through-beam photoelectric switches W 9 L: Laser photoelectric switches: small, light and reliable The
Load Cells. 3/2 Introduction. 3/3 Mounting components 3/3 Introduction
Siemens AG 2018 /2 Introduction / Mounting components / Introduction /4 Single point load cells /4 Overview /5 SIWAREX WL260 SP-S AA /5 - Load cell /6 SIWAREX WL260 SP-S AB /6 - Load cell /7 SIWAREX WL260
I nllk 08018/18 I nllk I nllk 08036/36 I nllk I I nllk 08058/58 I
I nllk / I x W x W x W x W x W Technical data Cooper Crouse-Hinds - all rights reserved nllk / nllk nllk / nllk nllk / Marking to //EC II G Ex na II T / II D td A IP T C EC Conformity Statement PTB ATEX
Incremental Rotary Encoder G58
Shaft: Type S / L / H Hollow shaft: Type W Mechanical Data Housing diameter: mm Shaft:... 0 mm Hollow shaft:... mm Line counts:... 0.000 signals: S, KI, KS, HTL, TTL, O, Vpp, µapp onnector or output: axial
Silicon Temperature Sensors KT 100 KT 110 KT 130 KT 210 KT 230. KTY 11-x KTY 13-x KTY 21-x KTY 23-x KTY 19-6 KTY 16-6
Silicon Temperature Sensors KT 100 KT 110 KT 130 KT 210 KT 230 KTY 16-6 KTY 10-x KTY 11-x KTY 13-x KTY 21-x KTY 23-x KTY 19-6 Features Temperature dependent resistor with positive temperature coefficient
Industrial Pressure Transmitter
ECT 87 Industrial Pressure Transmitter Swiss based Trafag is a leading international supplier of high quality sensors and monitoring instruments for measurement of and temperature. The economical transmitter
Hydraulic Pressure NAH Applications. Features. New generation available - refer to
NAH 8 Hydraulic Pressure Transmitter New generation available - refer to www.trafag.com/h70 Swiss based Trafag is a leading international supplier of high quality sensors and monitoring instruments for
SlimLine Sensors (SLS)
Force SlimLine Sensors (SLS) Measurement of Dynamic and Quasistatic Forces, 0 3 kn up to 0 80 kn Quartz sensor series with extremely flat design for measuring dynamic and quasistatic forces. High resolution,
RoHS. Versatile. X g. X 2 e
s IN8, - and The inclinometers of the IN8 series allow measuring inclinations in the range of ±85 or -dimensional inclinations up to 0. With their high robustness, their protection level up to max. IP9k
BTE5000 / PTE5000 / PTU5000 Series Precision differential pressure transmitters
FEATURES 5 mbar to 0 bar, 0. to 50 psi differential pressure...6 or...0 ma Precision temperature compensated and calibrated Rugged aluminium housing Female /8" BSP and /8" NPT fittings MEDIA COMPATIBILITY
Linear measuring technology
Their extremely robust construction, their high IP69k protection level and their wide temperature range make these new draw wire encoders particularly reliable and durable. Their flexibility and adaptability
Ring-Torsion Load Cells RTB
Ring-Torsion Load Cells RTB % PTB & OIML approved as suitable for trade use (up to 6000 d and 7500 d in case of multi-divisional scales) % High accuracy, even for very small utilisation ranges (down to
Type UB1 Load Cell. Option Stainless steel cable gland
Type UB1 Load Cell IP68 APPROVED Product Description Type UB1 is a stainless steel universal load cell which allows for tension and compression loading. Its complete hermetic sealing makes it suitable
TF 202 / TF 202-Ex. Field mounted temperature transmitters, FOUNDATION Fieldbus (H1), Pt 100 (RTD), thermocouples, 1 or 2 independent channels
TF 0 / TF 0-Ex Field mounted temperature transmitters, FOUNDATION Fieldbus (H), Pt 00 (RTD), thermocouples, or independent channels 0/-8.69 EN USA Input Resistance thermometer (,, wire circuit) Thermocouples
Linear actuator Econom 2. Our intelligent model: Econom 2. Econom 2
Linear actuator Econom 2 Our intelligent model: Econom 2 Econom 2 Linear actuators Econom 2 Description Applications Facts The users of the Econom 2 come from many different industries: From architects
Strain Gauges and Accessories
Strain Gauges and Accessories Nurgül Er nurguel.er@hbm.com www.hbm.com 19.03.2008, Folie 1 Hottinger Baldwin Messtechnik GmbH Nurgül Er How to find the right strain gauge a wide range of of strain gauges
E6C-N. Ideal for Out-of-step Detection of Stepping Motors and Position Control of Rotors and Unloaders
Multi-turn High-precision Encoder Ideal for Out-of-step Detection of Stepping Motors and Position Control of Rotors and Unloaders Reset function for easy origin alignment when built-into equipment. Multi-turn
4/4-way servo solenoid directional control valves, directly operated, with electrical position feedback and on-board electronics (OBE)
4/4-way servo solenoid directional control valves, directly operated, with electrical position feedback and on-board electronics (OBE) RE 9035/. Replaces: 05. 1/1 Type 4WRPEH 6 Size 6 Unit series X Maximum
Imformation of C091D series
Imformation of C09D series The QTY of contacts is -pin to -pin, the connection method for the thread type, pinhole connections for welding type, press-fit and PCB type. This series of connectors to prevent
Pressure Transmitter ED 701
Pressure Transmitter ED 701 Hygienic and industrial process connections Zero setting function Accuracy < 0.1% FS Quick response time < 25 ms High long-term stability Excellent repeatability Active compensation
AIR PREPARATION. ELECTRONICALLY CONTROLLED PRESSURE REGULATING VALVE (PROPORTIONAL PRESSURE REGULATING VALVE) SERIES control
AIR PREPARATION ELECTRONICALLY CONTROLLED PRESSRE REGLATING ALE (PROPORTIONAL PRESSRE REGLATING ALE) SERIES control Description Abb. Port size Recommended Type Data Sheet No. flow (l/min)* airfit tecno
35RP2 35RP2 HM 2 HM 3 35RP2. Type. Series Variation. Rack and pinion type Bore (mm) Rotating angle Angle adjustment.
2 3 Type Series Variation Rack and pinion type (mm) 3243 1 ngle adjustment Rated torque 32Nm 4Nm 22Nm (at 3. MPa) 343Nm 4Nm Maximum allowable pressure 3. MPa Proof test pressure MPa Minimum operating pressure.
EX-EMERGENCY LIGHT FITTINGS
EX-EMERGENCY LIGHT FITTINGS nllk 0...N 1-36 W Plastic version for Zone 2 and Zone 21/22 The explosion-protected light fittings of the series nllk 0 N are conform to the requirements of the ATEX-Directive
Size A DIN EN
Size A DIN EN 70-0 Actuators 0 series DIN EN 70-0 +, + ow and high housing Degree of protection IP6 Wired versions Moulded versions Degree of protection IP67 Contacts Thread Cable outlet Ordering-No. Female
Preliminary Product Information. LIC 4000 Series Exposed Absolute Linear Encoders
Preliminary Product Information LIC 4000 Series Exposed Absolute Linear Encoders April 2009 LIC 4000 Series Exposed absolute linear encoders Measuring lengths up to 27 m Measuring steps to 0.001 µm (1
Amphenol C 091 A/B/D. Circular Connectors. Amphenol-Tuchel Electronics GmbH
Amphenol C 091 A/B/D Circular Connectors Amphenol-Tuchel Electronics GmbH General information These connectors are designed and produced in conformity with the low-voltage directive (/3/EWG) respectively
HR-Z SERIES Mild Radiation Resistance LVDT
SERIES Mild Radiation Resistance LVDT SPECIFICATIONS Mild Radiation Resistant High Reliability Large core-to-bore clearance Stroke ranges from ± 0.05 to ±10 inches AC operation from 400Hz to 5kHz Stainless
DS 200 DS 200 DRUCK & TEMPERATUR LEITENBERGER GMBH. Electronic Pressure Switch. Stainless Steel Sensor. Electronic Pressure Switch
DRUCK & TEMPERATUR LEITENBERGER GMBH DS 00 Electronic Pressure Switch Stainless Steel Sensor accuracy according to IEC 00: standard: 0. % FSO option: 0. % FSO Nominal pressure: from 0... 00 mbar up to
HR-Z SERIES Mild Radiation Resistance LVDT
SERIES Mild Radiation Resistance LVDT SPECIFICATIONS Mild Radiation Resistant High Reliability Large core-to-bore clearance Stroke ranges from ± 0.05 to ±10 inches AC operation from 400Hz to 5kHz Stainless
W 30 Photoelectric proximity switches: Clear signals even with low remission
W 0 Photoelectric proximity switches Photoelectric proximity switches, BGS Photoelectric proximity switches, energetic W 0 Photoelectric proximity switches: Clear signals even with low remission In addition,
Increased Requirements for Higher Nominal Forces, Necessities and Possibilities to Measure Them
B 3.1 Increased Requirements for Higher Nominal Forces, Necessities and Possibilities to Measure Them Dr. Schäfer, André Hottinger Baldwin Messtechnik GmbH Im Tiefen See 45, 64293 Darmstadt andre.schaefer@hbm.com
MANUFACTURE OF STRAIN GAUGES & TRANSDUCERS
MANUFACTURE OF STRAIN GAUGES & TRANSDUCERS We produce sensors fitted with semiconductor or metal strain gauges for measuring forces, mass, pressure, torque, acceleration. We supply semiconductor silicon
MANUFACTURE OF STRAIN GAUGES & TRANSDUCERS
MANUFACTURE OF STRAIN GAUGES & TRANSDUCERS We produce sensors fitted with semiconductor or metal strain gauges for measuring forces, mass, pressure, torque, acceleration. We supply semiconductor silicon
BTEL5000 / PTUL5000 Series Precision very low differential pressure transmitters
FETURES to, to differential pressure...6 or... m Precision temperature compensated and calibrated Rugged aluminium housing Female /8" BSP and /8" NPT fittings MEDI CMPTIBILITY Pressure inlet: Non-corrosive,
Sales: Malux Finland Oy, P.O.Box 69, FI Porvoo, Phone , Fax ,
E X - L I G H T F I T T I N G S nllk 0... 1 - W All-plastic design for Zone 2 and Zone 21/22 The explosion-protected light fittings of the series nllk 0 conform to the requirements of the ATEX-Directive
Operating Instructions for Digital Manometer. Model: MAN-SD
Operating Instructions for Digital Manometer Model: MAN-SD 1. Contents 1. Contents...2 2. Note...3 3. Instrument Inspection...3 4. Regulation Use...4 5. Operating Principle...4 6. Mechanical Connection...5
Amphenol. Amphenol-Tuchel Electronics GmbH. Circular Connectors C 091 A/B/D Series
Amphenol Amphenol-Tuchel Electronics GmbH Circular Connectors C 09 A/B/D Series The Company Amphenol-Tuchel Electronics GmbH is a member of the USA based Amphenol Corporation. With our own global presence
FLOW SENSOR FOR LIQUID MEDIA Serie 210
FLOW SENSOR FOR LIQUID MEDIA Serie 0 Flow range 0.... 0 l/min Nominal diameters DN 6 / 8 / 0 / / 0 / Temperature measurement -0... + ÀC In comparison to the OEM flow sensor (type 00), the type 0 is available
TF 212 / TF 212-Ex. Field mounted temperature transmitters, PROFIBUS PA, Pt 100 (RTD), thermocouples, 1 or 2 independent channels 10/11-8.
TF / TF -Ex Field mounted temperature transmitters, PROFIBUS PA, Pt 00 (RTD), thermocouples, or independent channels 0/-8.70 EN P R O F I PROCESS FIELD BUS B U S Input Resistance thermometer (,, -wire
SINEAX VK 636 Programmable Temperature Transmitter with PROFIBUS-PA protocol
with PROFIBUS-PA procol for installation in the terminal head of a temperature sensor DIN 79, shape B Application 00 II () G FISCO The SINEAX VK 66 is a temperature transducer for use in aumation systems
INVESTIGATION OF THE CALIBRATION CAPABILITIES OF A 1 KN M AND 10 KN M REFERENCE CALIBRATION MACHINE
IMEKO 23 rd TC3, 13 th TC5 and 4 th TC22 International Conference 30 May to 1 June, 2017, Helsinki, Finland INVESTIGATION OF THE CALIBRATION CAPABILITIES OF A 1 KN M AND 10 KN M REFERENCE CALIBRATION MACHINE
PRODUCT CATALOGUE PREssURE switch
PRODUCT CATALOGUE PREssURE switch w w w. p a a b. c o m Pressure AT THe HIGHesT LeVeL Successful mediumsized companies are not successful because they are active in many areas, but rather because they
Thermal-Magnetic Circuit Breaker 2210-S2..
Thermal-Magnetic Circuit Breaker -S.. Description One, two and three pole thermal-magnetic circuit breakers with trip free mechanism and toggle actuation (S-type TM CBE to EN 6094/IEC 94). Designed for
V 12: Miniature photoelectric switches in M 12 housings
Lichtschranken Photoelectric Baureihe switcheswl 7- Photoelectric proximity switches Photoelectric reflex switches : iniature photoelectric switches in housings Through-beam photoelectric switches They
Thermal-Magnetic Circuit Breaker 2210-S2...
Thermal-Magnetic Circuit Breaker 0-S... Description One, two and three pole thermal-magnetic circuit breakers with trip free mechanism and toggle actuation (S-type TM CBE to EN 60934/IEC 934). Designed
Thermal-Magnetic Circuit Breaker 2210-S2...
Description One, two and three pole thermal-magnetic circuit breakers with trip free mechanism and toggle actuation (S-type TM CBE to EN 6094/IEC 94). Designed for panel or plug-in mounting. Available
Check-Q-meter. Table of contents. Features. Functions. RE 27551/ /10 Replaces: Type FD
Check-Q-meter RE /0.0 /0 Replaces: 09.9 Type FD Nominal size... Series ax. Operating pressure 0 bar ax. Flow 0 l/min K9/ Table of contents Contents Page Features Functions Ordering details Symbols Functional
Example of Calculating the Nominal Life
Condition (Horizontal Installation) Assumed model number : KR 5520A LM Guide unit (C = 800N, C 0 = 6900N) Ball Screw unit (C a = 620N, C 0a = 9290N) Bearing unit(fixed Side) (C a = 7600N, P 0a = 990N)
Thermal-Magnetic Circuit Breaker 2210-S2..
Thermal-Magnetic Circuit Breaker -S.. Description One, two and three pole thermal-magnetic circuit breakers with trip free mechanism and toggle actuation (S-type TM CBE to EN 60934/IEC 934). Designed for
Pressure Measurement. Transmitters for basic requirements SITRANS P MPS (submersible sensor) Transmitter for hydrostatic level 2/27
Overview Siemens AG 011 Function s are for measuring the liquid levels in wells, tanks, channels and dams. Diaphragm p Sensor U const. U + (brown) I EM I -1 (blue) 0, U B s are submersible sensors for
Electric amplifiers. RE 30044/02.12 Replaces: Type VT-VRPA X/V0/RTS-2STV. Component series 2X 1/8
Electric amplifiers RE 30044/02.12 Replaces: 11.02 1/8 Type VT-VRPA1-527-2X/V0/RTS-2STV Component series 2X Table of contents Contents Page Features 1 Ordering code, accessories 2 Front plate 2 Block diagram
Field IT 50T Series Transmitters
Data Sheet SS/G/A_ Field IT 0T Series Transmitters gauge/absolute pressure transmitter Ranges: -00 to 0000kPa - to 00bar -. to 6000psi Base accuracy : 0.% (BFSL) Chemical Vapour Deposition (CVD) technology
ABB SpA COMEM Operating Unit Strada Regionale 11, Signolo Montebello Vicentino (VI) - ITALY
ABB SpA COMEM Operating Unit Strada Regionale 11, Signolo 22 36054 Montebello Vicentino (VI) - ITALY www.abb.com/transformercomponents The information contained in this document is for general information
Servomotors Order Catalog. LSP-Servomotors with optional planetary gearbox Stall torque 0.18 to 110 Nm
Servomotors Order Catalog LSP-Servomotors with optional planetary gearbox Stall torque 0.8 to 0 Nm Order Catalogue LSP Servomotors ID no.: 08.8B.-0 Date: 0/07 Subject to technical change without notice.
Thermal-Magnetic Circuit Breaker 2210-T2...
Thermal-Magnetic Circuit Breaker 0-T... Description One, two and three pole thermal-magnetic circuit breakers with trip-free mechanism and toggle actuation (S-type TM CBE to EN 6094/IEC 94). Featuring
CTV series CHARACTERISTICS LINEAR UNITS
CTV series CHARACTERISTICS The CTV series describes s with a precision ball screw drive and two parallel, integrated, Zerobacklash rail guides. Compact dimensions allow high performance features such as,
E8EB-N0C2B E8EB-N0B2B
Slim Sensor CSM DS_E 1 Ideal for Workpiece Position and Original Checking The to 1 kpa model can be used for workpiece position checking. The to 1MPa model is ideal for original pressure checking. Degree
Turbine Meter TRZ 03 PRODUCT INFORMATION. Reliable Measurement of Gas
Turbine Meter TRZ 0 PRODUCT INFORMATION Reliable Measurement of Gas TURBINE METER TRZ 0 Method of operation, Construction Method of operation The TRZ 0 turbine meter is a flow meter suitable for gas measurement
MKV AC Capacitors Damping B High dielectric strength High peak-current capability Especially suitable for snubber circuits
MKV AC Capacitors B 25 835 High dielectric strength High peak-current capability Especially suitable for snubber circuits Construction Self-healing Plastic dielectric Oil-impregnated tubular windings (no
OPERATION MANUAL. Acceleration, Velocity RMS measurement, Metric & Imperial unit PEN VIBRATION METER Model : PVB-820
Acceleration, Velocity RMS measurement, Metric & Imperial unit PEN VIBRATION METER Model : PVB-820 Your purchase of this PEN VIBRATION METER marks a step forward for you into the field of precision measurement.
Precision Ball Screw/Spline
58-2E Models BNS-A, BNS, NS-A and NS Seal Outer ring Shim plate Seal Spline nut Seal Collar Shim plate Seal End cap Ball Outer ring Ball screw nut Outer ring Ball Retainer Retainer Outer ring Point of
Usage limitations and accuracies of platinum resistance thermometers (DIN EN 60751:2009) in industrial applications
Technical information Usage limitations and accuracies of platinum resistance thermometers (DIN EN 60751:2009) in industrial applications WIKA data sheet IN 00.17 General information Temperature is a measurement
Thermal-Magnetic Circuit Breaker 2210-S2..
Thermal-Magnetic Circuit Breaker -S.. Description One, two and three pole thermal-magnetic circuit breakers with trip-free mechanism and toggle actuation (S-type TM CBE to EN 60934/IEC 934). Designed for
Surface-mounting thermostats Series ATH
JUMO GmbH & Co. KG Delivery address:mackenrodtstraße 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 E-mail: mail@jumo.net Internet: www.jumo.net
Digital AC Motors MHD
Digital AC Motors MHD090 8-1 8 MHD090 8.1 Technical Data Description Symbol Unit MHD090B-035 Type of cooling Natural Natural Surface Liquid Motor overtemperature 60 K 100 K 60 K/100 K 60 K/100 K Electric
2-way proportional throttle valve for block installation
-way proportional throttle valve for block installation Types FES; FESE Sizes to Component series X Maximum operating pressure bar Maximum flow 800 l/min at Δp = 0 bar Table of contents Contents Page Features
THE NEW 1.1 MN m TORQUE STANDARD MACHINE OF THE PTB BRAUNSCHWEIG/GERMANY
THE NEW 1.1 MN m TORQUE STANDARD MACHINE OF THE PTB BRAUNSCHWEIG/GERMANY D. Peschel 1, D. Mauersberger 1, D. Schwind 2, U. Kolwinski 2 1 Solid mechanics department, PTB, Germany 2 Gassmann Theiss Messtechnik
Operating limits and tolerances of platinum resistance thermometers per EN 60751: 2008
Technical information Operating limits and tolerances of platinum resistance thermometers per EN 60751: 2008 WIKA data sheet IN 00.17 General information Temperature is a measurement for the thermal state
XL-580. Liste de pièces Lista de Piezas Parts List Copyright SVP Worldwide - All rights reserved
0 Copyright SVP Worldwide - All rights reserved XL-0 Liste de pièces Lista de Piezas Parts List 0-6 0 March 0 A 0 0 6 6 Singer XL-0 Pos Part No Description 0 0 THRUST WASHER 60 MAIN SHAFT WITH BALANCER