SUMICRYSTAL CD blanks are Single Crystal Diamond blanks for Wire Drawing Dies. Wire Drawing Die Blanks

Size: px

Start display at page:

Download "SUMICRYSTAL CD blanks are Single Crystal Diamond blanks for Wire Drawing Dies. Wire Drawing Die Blanks"

Georgia Brooks
5 years ago
Views:

1 SUMICRYSA CD SUMICRYSA CD blanks are Single Crystal Diamond blanks for Wire Drawing Dies Wire Drawing Die Blanks

$Features : High purity synthetic single crystal diamond blanks Constant high quality Excellent fracture resistance resulting in superior Die life time High thermal conductivity, about double that of$ the precision of the orientation is less than 1 No grinding necessary, since the parallelism between top and bottom faces is created by cleavage.

the precision of the orientation is less than 1 No grinding necessary, since the parallelism between top and bottom faces is created by cleavage.

he uniform shape facilitates the setting process. Also very suitable for the production of Nozzles and Wire Guides. CD1006(111) 1.0 ± 0.1 0.6 ± 0.1 CD1008(111) 1.0 ± 0.1 0.8 ± 0.1 CD1210(111) 1.2 ± 0.

2 Features : High purity synthetic single crystal diamond blanks Constant high quality Excellent fracture resistance resulting in superior Die life time High thermal conductivity, about double that of Natural Diamonds Virtually free of impurities, inclusions and cracks that are commonly found in Natural Diamonds Precise Crystal Orientation: the top and bottom faces are in the (111) orientation and the precision of the orientation is less than 1 No grinding necessary, since the parallelism between top and bottom faces is created by cleavage. SUMICRYSA CD Product Number Shape Rectangular shape produced by aser cutting of the outer circumference op and bottom surfaces are produced by cleavage. he uniform shape facilitates the setting process. Also very suitable for the production of Nozzles and Wire Guides. CD1006(111) 1.0 ± ± 0.1 CD1008(111) 1.0 ± ± 0.1 CD1210(111) 1.2 ± ± 0.1 CD1411(111) 1.4 ± ± 0.1 CD1512(111) 1.5 ± ± 0.1 CD1814(111) 1.8 ± ± 0.1 CD2016(111) 2.0 ± ± 0.1 CD2318(111) 2.3 ± ± 0.1 CD2520(111) 2.5 ± ± 0.1 / in mm aser Cut Surface Cleaved Surface Other applications : In addition to the well-known Wire Drawing applications, SUMICRYSA CD is also used for the production of Nozzles (e. g. for Water Jet Cutting) and Wire Guides (EDM Wire Cutting). SUMIOMO EECRIC Hartmetall GmbH Siemensring Willich Germany Phone: +49(0) Fax: +49(0)

3 SUMICRYSA PD SUMICRYSA PD blanks are Single Crystal Diamond blanks for High Precision Dressing ools Dresser Blanks

Features PD and PDX : Revolutionary Unique Elongated Shape Constant high quality Consistent cross - section allows constant dressing performance during the whole tool life Elongated shape drastically

shape which facilitates to find the most abrasive resistant direction in the tool. PD0220 0.2 ± 0.05 0.2 ± 0.05 2 ~ 2.5 PD0420 0.4 ± 0.05 0.4 ± 0.05 2 ~ 2.5 PD0630K 0.6 ± 0.1 0.6 ± 0.1 3 ~ 4 PD0640K 0.

1 ± 0.1 1.1 ± 0.1 4 ~ 5 W Cleaved face ( 110 ) < 110 > Abrasive resistance direction 55 (211) aser-cut face PD0630K 0.6 ± 0.1 0.6 ± 0.1 3 ~ 4 PD0640K 0.6 ± 0.1 0.6 ± 0.1 4 ~ 5 PD0830K 0.8 ± 0.

1 4 ~ 5 / W / in mm Cleaved face (111) ( 110 ) aser-cut face (211) ( 110 ) 55 ( 211 ) Abrasive resistance direction ype with pre-determind abrasive resistance direction KK ype SUMICRYSA PDX aser-cut

4 Features PD and PDX : Revolutionary Unique Elongated Shape Constant high quality Consistent cross - section allows constant dressing performance during the whole tool life Elongated shape drastically reduces Diamond Pull Out compared with Natural Diamond SUMICRYSA PD Product No W Shape At least one end is laser-cut (K-type) KK- type has both end-faces cut with laser he - type PD shows up a unique shape which facilitates to find the most abrasive resistant direction in the tool. PD ± ± ~ 2.5 PD ± ± ~ 2.5 PD0630K 0.6 ± ± ~ 4 PD0640K 0.6 ± ± ~ 5 PD0650K 0.6 ± ± ~ PD0830K 0.8 ± ± ~ 4 PD0840K 0.8 ± ± ~ 5 PD0850K 0.8 ± ± ~ PD1130K 1.1 ± ± ~ 4 PD1140K 1.1 ± ± ~ 5 W Cleaved face ( 110 ) < 110 > Abrasive resistance direction 55 (211) aser-cut face PD0630K 0.6 ± ± ~ 4 PD0640K 0.6 ± ± ~ 5 PD0830K 0.8 ± ± ~ 4 PD0840K 0.8 ± ± ~ 5 PD1130K 1.1 ± ± ~ 4 PD1140K 1.1 ± ± ~ 5 / W / in mm Cleaved face (111) ( 110 ) aser-cut face (211) ( 110 ) 55 ( 211 ) Abrasive resistance direction ype with pre-determind abrasive resistance direction KK ype SUMICRYSA PDX aser-cut aser-cut Product No W Shape New product with modified Face Orientation Superior performance (Abrasion Resistance) Setting Process facilitated At least one end is laser-cut K - type has both end - faces cut with laser PDX ± ± ± 0.1 PDX ± ± ± 0.1 PDX ± ± ± 0.1 PDX ± ± ± 0.5 PDX ± ± ± 0.5 PDX ± ± ± 0.5 PDX ± ± ± 0.5 PDX ± ± ± 0.5 PDX ± ± ± 0.5 / W / in mm K ype W Cleaved face < 110 > Abrasive resistance direction ( 211) (110) aser-cut face aser-cut aser-cut SUMIOMO EECRIC Hartmetall GmbH Siemensring Willich Germany Phone: +49(0) Fax: +49(0)

5 SUMICRYSA UP SUMICRISA UP blanks are Single Crystal Diamond blanks for High Precision and Ultra-High Precision Cutting ools Cutting ool Blanks Cutting ool Blanks

Features (Standard ype and Economy ype): High purity synthetic single crystal diamond blanks Constant high quality Excellent wear resistance Good chipping resistance Standard ype Product

Precision of Face Orientation and Machined Surfaces is within 3. UP282512 2.8 ~ 3.5 2.5 ~ 3.5 ~ 0.8 1.2 ± 0.1 UP282515 2.8 ~ 3.5 2.5 ~ 3.5 ~ 0.8 1.5 ± 0.1 UP303015 3.0 ~ 3.5 3.0 ~ 3.5 ~ 0.3 1.

5 ~ 4.0 3.5 ~ 4.0 ~ 0.4 1.7 ± 0.1 UP351717 3.5 ~ 4.0 1.7 ~ 2.0 ~ 0.4 1.7 ± 0.1 / W / C1;C2 / in mm W C1 C2 Economy ype Product No D * * Half stone Shape More economic type compared with standard type due to less aser machining.

For bigger sizes half stones are available and offer even more economical benefits. UP1510 1.5 1.0 - UP1512 1.5 1.2 - UP2010 2.0 1.0 - UP2012 2.0 1.2 - UP2510 2.5 1.0 - UP2512 2.5 1.2 - UP2515 2.

0 2.0 Available UP4512 4.5 1.2 Available UP4515 4.5 1.5 Available UP4520 4.5 2.0 Available UP5010 5.0 1.0 Available UP5012 5.0 1.2 Available UP5015 5.0 1.5 Available UP5020 5.0 2.0 Available * minimum guaranteed dimensions; D / in mm D ( 100 ) SUMIOMO EECRIC Hartmetall GmbH Siemensring 84 47877 Willich Germany Phone: +49(0)2154-4992- 0 Fax: +49(0)2154-41072 www.

6 Features (Standard ype and Economy ype): High purity synthetic single crystal diamond blanks Constant high quality Excellent wear resistance Good chipping resistance Standard ype Product No W C1; C2 Shape Rectangular shape produced by aser cutting of all 6 faces. Face orientations are all (100) except for the corners. Precision of Face Orientation and Machined Surfaces is within 3. UP ~ ~ 3.5 ~ ± 0.1 UP ~ ~ 3.5 ~ ± 0.1 UP ~ ~ 3.5 ~ ± 0.1 UP ~ ~ 1.7 ~ ± 0.1 UP ~ ~ 4.0 ~ ± 0.1 UP ~ ~ 4.0 ~ ± 0.1 UP ~ ~ 4.0 ~ ± 0.1 UP ~ ~ 4.0 ~ ± 0.1 UP ~ ~ 2.0 ~ ± 0.1 / W / C1;C2 / in mm W C1 C2 Economy ype Product No D * * Half stone Shape More economic type compared with standard type due to less aser machining. Periphery and growth face of the upper face are not machined. arge size and low cost compared with standard type. Extremely precise Face Orientation of the growth face (within 0.3 ). For bigger sizes half stones are available and offer even more economical benefits. UP UP UP UP UP UP UP UP Available UP Available UP Available UP Available UP Available UP Available UP Available UP Available UP Available UP Available UP Available UP Available UP Available UP Available UP Available * minimum guaranteed dimensions; D / in mm D ( 100 ) SUMIOMO EECRIC Hartmetall GmbH Siemensring Willich Germany Phone: +49(0) Fax: +49(0)

T1500Z. General Purpose Coated Cermet for Steel Turning

T1500Z. General Purpose Coated Cermet for Steel Turning TOOLING NEWS E-125 P M K N S H General Purpose Coated Cermet for Steel Turning Brilliant Coat for glossy finished surface and excellent wear resistance Expanded chip breaker lineup with newly developed