Integration of Historic Building Information Modeling (HBIM) and 3D GIS for Recording and Managing Cultural Heritage Sites
|
|
- Walter Carson
- 6 years ago
- Views:
Transcription
1 Dublin Institute of Technology Conference papers School of Surveying and Construction Management 2012 Integration of Historic Building Information Modeling (HBIM) and 3D GIS for Recording and Managing Cultural Heritage Sites Conor Dore Dublin Institute of Technology, Maurice Murphy Dublin Institute of Technology, Follow this and additional works at: Part of the Historic Preservation and Conservation Commons Recommended Citation Dore, C., Murphy, M., (2012), Integration of Historic Building Information Modeling and 3D GIS for Recording and Managing Cultural Heritage Sites, 18th International Conference on Virtual Systems and Multimedia: "Virtual Systems in the Information Society", 2-5 September, 2012, Milan, Italy, pp This Conference Paper is brought to you for free and open access by the School of Surveying and Construction Management at It has been accepted for inclusion in Conference papers by an authorized administrator of For more information, please contact
2 Integration of Historic Building Information Modeling (HBIM) and 3D GIS for Recording and Managing Cultural Heritage Sites C. Dore, M. Murphy School of Construction Dublin Institute of Technology Bolton Street Campus, Dublin 1, Ireland Abstract This paper outlines a two stage approach for digitally recording cultural heritage sites. This approach involves a 3D modeling stage and the integration of the 3D model into a 3D GIS for further management and analysis. The modeling stage is carried out using a new concept; Historic Building Information Modeling (HBIM) which has been developed at the Dublin Institute of Technology [12]. Historic Building Information Modeling is a system for modeling historic structures from laser scan and photogrammetric data using Building Information Modeling (BIM) software. The HBIM process involves a reverse engineering solution whereby parametric objects representing architectural elements are mapped onto laser scan or photogrammetric survey data. A library of parametric architectural objects has been designed from historic manuscripts and architectural pattern books. These parametric objects were built using an embedded scripting language within the BIM software called Geometric Descriptive Language (GDL). These objects are combined and mapped onto the survey data to build the entire model. After the 3D model has been created the next stage involves integrating the 3D model into a 3D GIS for further analysis. The international framework for 3D city modeling, CityGML has been adopted for this purpose. CityGML provides an interoperable framework for modeling 3D geometries, semantics, topology and appearance properties [13]. The aim of this research is to bridge the gap between parametric CAD modeling and 3D GIS while using benefits from both systems to help document and analyze cultural heritage sites. Keywords - Laser Scanning; Parametric Modeling; BIM; Semantic Modeling; 3D GIS; CityGML, Cultural Heritage I. INTRODUCTION The generation of 3D cultural heritage models has become a topic of great interest in recent years. One reason for this is the more widespread use of laser scanning and photogrammetry for recording cultural heritage sites. These technologies have made it possible to efficiently and accurately record complex structures remotely that would not have been possible with previous survey methods. In addition to these developments, digital information systems are evolving for the presentation, analysis and archival of heritage documentation. These new digital information systems allow for the production of multi-purpose nd models that can be used for more than just visualization. This paper presents a design framework for the integration of two new developments in this area, Historic Building Information Modeling (HBIM) and CityGML. HBIM provides a solution for parametric modeling of historic buildings/objects from laser scan or photogrammetric survey data. HBIM includes a plug in library of architectural objects for Building Information Modeling software platforms and a system for plotting these objects to laser scan or photogrammetric survey data. After a HBIM model has been created the next stage involves the integration of the 3D model into a 3D GIS for further management and analysis. CityGML, an Open Geospatial Consortium (OGC) standard 3D data format has been adopted for this purpose. CityGML has a detailed semantic framework for city objects and enables further information to be stored as attributes or external references. The aim of this paper is to build on the new concept of Historic Building Information Modeling (HBIM) and to investigate the integration of HBIM into a 3D GIS environment using the CityGML framework for the purpose of cultural heritage modeling. Section II of this paper contains a literature review for the main topics involved with this research. Section III contains a methodology for the proposed workflow and includes a case study which demonstrates the entire process from laser scan/image survey to HBIM, to 3D GIS as seen in Fig. 1 below. Section IV describes the next stages of work to be carried out in this area and finally section V contains the conclusions to date. Figure 1. Workflow /12/$ IEEE 369
3 II. LITERATURE REVIEW A. Building Information Modeling Building Information Modeling (BIM) is a recent advancement in computer aided design (CAD) systems. BIM differs from traditional CAD systems because it is based on information enhanced parametric building elements, which are combined to create whole buildings within a virtual environment. In addition to 3D visualization and animations, BIM can automate the production of digital documentation (3D, orthographic projections cut sections, details) and design schedules for economic, structural, environmental and energy functions. The parametric objects (such as windows, doors, walls, roofs etc.) store data relating to the object and its relationship to the whole building and are not defined singularly but as systems using interaction with other objects. B. Historic Building Information Modelling Historic Building Information Modeling (HBIM) as plug-in for BIM is a novel prototype library of parametric objects built from historic data and a system for mapping the parametric objects onto a point cloud and image survey data. The HBIM process begins with remote collection of survey data using terrestrial laser scanning or digital photo modeling. A library of parametric objects were designed and constructed which are based on the manuscripts ranging from Vitruvius to 18th century architectural pattern books. In building parametric objects, the problem of file format and exchange of data has been overcome by using geometric descriptive language (GDL). The scripting in GDL allows for sharing and editing of the parametric objects at different levels. The plotting of parametric objects onto the laser scan or other survey data as building components to create or form the entire building is the final stage in the reverse engineering process. 1) Related Research With the exception of [7], very little work has been done in relation to modeling historic buildings and also generating BIM models from laser scan survey data. Their work concentrated on the problems associated with combining laser scanning and BIM and plotting generic library objects onto the scan in a BIM environment. Within the research areas of both procedural and parametric modeling the use of architectural knowledge to inform the creation of models has now developed into a common part of the design approach. Existing research [5], [3] in the area of parametric modeling of architectural heritage has initiated a new direction by examining how architectural historic rules can be exploited to build computer models of structures and their elements. While these works inform the HBIM approach they differ in their way of approach to the analysis of historic data and parametric design. C. 2D & 3D Geographic Information Systems A Geographic Information System (GIS) is used for storing, visualizing and analyzing geographic data. Spatial features are stored as geometry and referenced with map projections and coordinates. Attributes stored in tables are then associated with spatial features to allow for spatial analysis of data. GIS has traditionally been used with 2D mapping to analyze data over large areas. However, as a result of technological advancements, the principles of 2D GIS are now being applied to 3D spatial data to enable more complex analyses, visualization and documentation. This enables complex analysis to be carried out for many applications such as 3D cadaster, planning, disaster management, noise mapping and also cultural heritage. D. CityGML CityGML is an international standard data format for representing 3D urban objects. It facilitates the exchange of 3D data and supports the sustainability and interoperability of 3D objects [14]. CityGML is an Extensible Markup Language (XML) format which is an application of the Geographic Markup Language 3 (GML3). Unlike many other 3D data formats, CityGML can store more than just 3D geometries. CityGML describes objects in relation to their geometrical, topological, semantical and appearance properties [8]. This allows for many more applications of 3D models. In the past 3D models have been used primarily for visualization purposes. With the addition of topology and semantic information complex analysis and 3D spatial queries can be carried out in a GIS environment. CityGML has a detailed framework defined for modeling the most important city elements. This framework includes core modules for buildings, relief, vegetation, transportation, water bodies, city furniture and land use. Each module has a framework defining semantic classes, attributes and relationships (topology) that are used to model city objects. By using this CityGML framework for modeling city objects, it ensures the interoperability of the model and adds many capabilities to the model. These capabilities include: The ability to semantically classify and divide a model into its sub elements. The ability to define attributes and external references within the file which are associated with semantic elements in the model. Capabilities for integration of CityGML files into a database for efficient management and analysis. Web capabilities for sharing data as format is structured and coded in xml. Great geo-referencing capabilities as mapping projections and coordinate reference systems can be defined at the start of the CityGML file. All geometric objects are stored using coordinates relative to the defined coordinate reference system. Representation at five different levels of detail depending on the application. Capabilities for complex analysis of geometry, semantic classes, attributes, external references and topologies in a GIS platform. 1) Applications of CityGML Current applications of CityGML are focused around city modeling for planning, disaster management [8], 3D cadaster [10] and other applications. Although CityGML was designed for city modeling, because of its capabilities and interoperable design it would also be suitable for 3D heritage modeling. With the exception of [4] and [6] very little research has been carried out applying CityGML for cultural heritage applications. Research in [4] focused on future perspectives for archaeological documentation where CityGML was assessed for the management of spatial and geographic documents. In 370
4 this research modifications were made to the CityGML profile for archaeological purposes. This included an extension to the schema topology_xsd to represent stratigraphical units. In [6] CityGML is adopted as an approach to semantic modeling of cultural heritage objects. An extension was also developed for the CityGML framework by these authors to accommodate for intervention and monitoring of cultural heritage sites. Although both of these contributions to semantic cultural heritage modeling with CityGML are very beneficial they have not shown the full capabilities of CityGML for heritage modeling that were mentioned previously. Both research works have shown that an extension to the existing CityGML framework is needed for cultural heritage modeling to define additional semantic classes and attributes that would be unique for cultural heritage applications. In this paper a more detailed extension is proposed for accurate semantic modeling of architectural detail in the CityGML framework. To date such an extension has not been developed and would be very beneficial for extending CityGML for the application of heritage modeling. E. Combining BIM and GIS There are many advantages of combining CAD products and GIS. CAD is mostly used for engineering applications and the products are generally detailed and accurate drawings or models of small objects or sites. GIS on the other hand is seen as cartographic tool for mapping and analyzing data over larger areas. Spatial data for GIS would not be considered as accurate or detailed as spatial data created in CAD systems. By combing both systems the capabilities and advantages of both CAD and GIS can be utilized. This would result in accurate and detailed CAD products used in a GIS platform that could be linked to additional data to perform complex analysis and spatial queries. For the application of cultural heritage, detailed and accurate 3D models are required. In order to develop a 3D GIS for this purpose it is necessary to integrate CAD and GIS as detailed 3D models cannot be created in most GIS platforms. One of the main problems with this is interoperability problems with CAD and GIS datasets. Unlike standard CAD products, BIM products which are based on the international standard Industry Foundation Class (IFC), has great capabilities for integration into a GIS platform. This is because IFC is an interoperable standard format that is object orientated and semantically classified. This is crucial for a GIS and CityGML as the model contains more than just geometry and it enables the IFC semantic classes to be converted into suitable GIS/CityGML classes with attributes and further information. Existing work in this area [1] has shown the capabilities of integrating BIM and GIS for planning, 3D cadaster, environmental simulations and disaster management. In this research CityGML was also adopted and an extension to CityGML was created for integrating BIM models into CityGML. BIM and IFC concentrate on modeling buildings and as a result have very detailed semantics for buildings. CityGML on the other hand is more focused on city modeling so it does not have the same level of semantics for buildings. For this reason authors of [1] developed a BIM extension to CityGML which added new semantic classes for buildings. This research has shown it is possible to integrate BIM models into CityGML and extend the CityGML model for a specific application. III. METHODOLOGY In this section a methodology is presented for the initial stages carried out in further developing the HBIM process and the integration of HBIM into CityGML for heritage modeling. A case study is also presented to show the entire process applied to a heritage site located in Dublin, Ireland. This research is still in progress so only the initial results are presented in this paper. The next stages of research to be carried out are described in section IV. A. Historic Building Information Modelling A number of developments have been made to the existing HBIM process developed [12] which was described in section II. These developments are to assist the integration of HBIM to CityGML and also to increase the level of automation in the process. These developments are described in the following sections. 1) Integrating Survey Data The first development is to improve the methods for integrating data from a laser scan/photogrammetric survey. BIM software is normally used to model new proposed buildings as opposed to existing buildings. For this reason precise geo-referencing of objects is not crucial in most BIM models. Products from the laser scan/photogrammetric survey that are imported into the HBIM environment include orthographic imagery, segmented point clouds and cut sections. Previously these products were imported and aligned together using a best fit alignment method and did not maintain their true geo-referenced position. Datasets were placed in a new arbitrary coordinate reference system within the BIM software. This process has been changed so that all datasets are now capable of being imported using their true coordinates into a HBIM environment. Firstly this ensures there is no loss in accuracy when joining multiple datasets as products are positioned precisely with their true coordinates. This also enables geo-referencing to be later utilized in a 3D GIS which is a key part of CityGML and the GIS paradigm. Because BIM is not designed for importing laser scan or survey data, a number of steps were developed to import 3D survey data. An orthographic image representing a building façade or plan is an important tool for HBIM modeling. This was previously imported in 2D and aligned to other datasets in elevation. This can results in inaccuracies and a build-up of errors when aligning multiple orthographic images. A new method was developed to accurately integrate 3D ortho images in their true geo-referenced position. This involved using the embedded scripting language within the BIM software to create a textured 3D plane that can be positioned based on the true coordinates of the image. Using correctly positioned 3D orthographic images ensures objects mapped to multiple images will be in their correct relative and absolute positions. Other survey products such as segmented point clouds can be imported and used to generate a ground terrain model. This can be carried out using a mesh command within the embedded scripting language. This enables ground points from the survey data to be imported in their true position from their 3D coordinates and a mesh surface generated. As seen in Fig. 2 below all survey datasets are easily and accurately integrated when referenced with their true coordinates. 371
5 so this geometric and semantic information is very valuable for further analysis in a 3D GIS. Figure 2. Accurate Integration of Scan Data into HBIM 2) Parametric Libraries A library of parametric architectural objects has been created which are based on the manuscripts ranging from Vitruvius to 18th century architectural pattern books. Classical architectural buildings are made up of decoration in the form of moldings (Fig. 3) which are combined with cylindrical and planer objects and are brought together, based on a series of rules in relation to space, geometry and aesthetics to create a whole structure. By starting with the design of parametric moldings as the smallest building block, followed by the parametric design of elements such as columns, pediments, walls, windows, roofs etc. a design framework based on parametric design and shape rules is presented. The library objects were created using an embedded scripting language within the BIM software called Geometric Descriptive Language (GDL). GDL provides access to modeling of objects through a BASIC like language; these objects are specifically constructed for one or many uses and carry the required parametric information for the object s function. Shapes are scripted, based on primitives that represent the simplest solid objects; these are the building blocks of GDL and culminate to create the more complex parts. Figure 3. Combined Primitives for Doric Column The previous HBIM libraries (Murphy et al. 2009) focused on objects for historical buildings. As stated by Boehler and Heinz (1999), it is equally important to record topography and other objects surrounding a heritage object/building to provide context. For this reason the HBIM libraries have been extended to include further elements that may surround historic buildings. New parametric objects and new procedures have been developed for modeling terrain, roads, footpaths, walls, railings, steps and street furniture as seen in Fig. 4. A framework for these features is also well defined in CityGML Figure 4. Extending HBIM with new library objects for elements surrounding buildings. 3) Plotting Parametric Objects onto Laser Scan/Image Data Mapping objects directly onto a point cloud is not practical as the data size of the point cloud can be very large which will slow down data processing. In addition accuracy is affected by mapping in 3D space, as it is difficult to locate an object s exact position within a 3D point cloud. The proposed solution is to map the objects in 2D onto segmented point clouds and orthographic images in elevation, plan and section. Before placing a library object in HBIM the default parameters of the object can be edited, changing the object s shape, size or other properties to correspond with the survey data. When library objects are brought into HBIM they are first positioned in plan using ortho imagery or cut sections through the point cloud. The height of the object is specified by a parameter for its formation level. Objects are then more precisely positioned in front and side elevation from further ortho imagery and cut sections. The positioning and plotting of objects can be further automated by making improvements to the parametric design. Using the embedded scripting language an entire external wall or building façade can be treated as a single library object. The positioning of window openings can be set up from rules of proportion outlined in architectural pattern books. A typical panel of a Georgian façade is modeled on the left side of Fig. 5. A series of openings are established using a GDL script for cutting the openings in the wall panel. The modular wall panel contains a series of openings laid out in the typical classical proportion. There are two large openings represented by two circles, one medium opening represented by intersecting circles and one small opening represented by one circle. The width of the window A (the circle s diameter) is a common factor in setting up the proportions, and is used to establish the position of the openings in the wall as detailed in the section of GDL script on the right of Fig Figure 5. Wall Façade as a GDL Object
6 Using GDL it is possible to add further parameters (by means of editable 3D hotspots) that can be used to interactively edit the position of window openings that don t match to survey data within HBIM either in 2D or in 3D (Fig. 6). This is necessary as all buildings won t conform exactly to the rules of proportion. However by first constructing an ideal façade the process of combining library part will be much faster. The ideal façade can then be overlaid with scan data such as orthographic imagery. If the automatic position of window openings does not match the survey data, then the user can simply move points interactively in 3D or 2D to fit the survey data as seen in Fig. 6. Figure 6. Interactively Modifying Position of Window Openings B. Integration of HBIM to CityGML As discussed in section II there are many advantages for integrating the results of a HBIM model into a 3D GIS. This section outlines the methods currently tested for converting HBIM models to CityGML. 1) Conversion to CityGML There are a number of different methods available for converting models to CityGML. Because HBIM models are based on the IFC format the model is already classified into semantic classes. This object orientated model makes the conversion into CityGML much easier as the geometry does not have to be classified into objects. The IFC semantic classes simply have to be mapped to the relevant CityGML class. An initial method for converting models to CityGML was tested using a plug-in for Google SketchUp software which has capabilities for converting SketchUp models into CityGML. Both the Google SketchUp software and the plug in are open source and can be freely downloaded. It also possible to export the HBIM model into in the required format (.skp) for Google SketchUp so there are no interoperability problems between the two software platforms. An advantage of this method is that the geometry is automatically converted to CityGML. However, a disadvantage is that the semantic information from the BIM model is not retained and so it requires the manual association of semantic classes within Google SketchUp. The plug in converts objects into CityGML semantic classes based on layer names. For this reason it is necessary to place elements of the model into appropriate layers and named according to the CityGML semantic class. For example a wall surface that is part of a building should be in a layer named Buildng.Wall. A window which is an opening of a wall should be named Buildng.Wall.Window. Numbers can also be used to accommodate for multiple elements within a model for example Buildng1.Wall. Once the layers are correctly set up the plug-in can be used to convert the model into a CityGML file. This will then be saved as an xml file and can be opened in any CityGML viewers. Because CityGML is an open standard there are many free viewers available to download, such as the FZK viewer designed at the Karlsruhe Institute of Technology. Next stages of research will be to test other more automated methods of conversion such as using the open source building information model server based on IFC which has export functionality from IFC directly to CityGML. 2) Linking Data Once the model has been converted to CityGML the next stage involves adding additional information to the model. This is done by editing the xml file directly and adding the required attributes. CityGML has a number of predefined attributes for each semantic class. For heritage applications the building attributes for year of construction and year of demolition are very useful for documenting the chronology of a building or building parts. This allows for modeling the changes of a heritage object over time. This is crucial to assist with conservation and restoration of heritage objects. CityGML also allows for external resources to be connected to a model or specific parts of a model as illustrated in Fig. 7. External resources can include databases or websites. This is very beneficial for heritage documentation as it allows for existing heritage records to be linked to the 3D heritage model. Figure 7. External References attached to parts of a Building [13]. 3) New Capabilities After converting the model from a BIM model to CityGML the dataset can now be managed an analyzed in a GIS environment. The model is semantically classified into various objects which can all contain attribute information and references to external data sources. This information can contain historical information about the creation, origin and chronology of the heritage object. Further historical documents can be linked to elements in the model for a complete documentation. The model can also be used for tourism applications and easily shared over the web for visualization. Various levels of detail can be defined for objects in the xml file so that the model can be represented at different detail as required. 373
7 C. Case Study of Henrietta Street A case study has been undertaken to show the application of HBIM and CityGML for modeling and analyzing a heritage site. The heritage site chosen is an 18 th century Georgian street located in Dublin, Ireland (Fig.8). The street known as Henrietta Street is one of the earliest Georgian streets in Dublin and is of great historical significance. The street was developed by Luke Gardiner and constructed between 1730 and The buildings on Henrietta Street show great classical style architecture and was originally seen city palaces. During the 19 th and 20 th century s the street fell into disrepair and despite recent restoration work there are still a number of buildings that need urgent attention. TABLE I. REGISTRATION RESULTS Figure 10. Registration of First Three Scans Figure 8. Henrietta Street Dublin The final products from the laser scan and image survey that would be used in the subsequent HBIM stage included segmented point clouds, orthographic imagery (Fig. 12), cut sections, elevations and plans. 1) Laser Scan Survey In order to show how the efficiency of modeling using HBIM the entire street was recorded using laser scanning and image acquisition methods. Eight scans were carried out with 10mm resolution using a Trimble GS200 terrestrial laser scanner as seen in Fig. 9. Common targets were surveyed at a higher resolution (2mm) in common areas between scans for registration of scans. Five to eight common targets were surveyed to ensure accurate registration results during processing. Figure 11. Point Cloud and Mesh Model from Laser Scan Survey. Figure 9. Trimble GS200 Laser Scanner A number of pre-processing steps were carried out on the scan data before modeling using HBIM. These pre-processing steps included registration, segmentation/filtering, triangulation, texturing, ortho photo creation and the generation of cut sections. All processing of scan data was carried out using Trimble Realworks software. For registration two different methods were used, a cloud based registration and also registration using common points. The results from this can be seen in Table 1. The first three registered scans are shown in Fig. 10. Other pre-processing stages and final point clouds can be seen in Fig. 11. Figure 12. Ortho Imagery from Laser Scan Survey. 374
8 2) Modeling with HBIM Next the survey products were imported into the BIM platform ArchiCAD and the HBIM process was applied. 3D Orthographic images were imported in their true position for façade elevations and plans along with ground points and sections. The first stage involved building walls from the plan data (Fig. 13). Next library objects were added for windows, doors, columns and all other building elements. Parameters for library parts were measured from survey data and applied to library part before mapping to survey data. Figure 16. Automated 2D Heritage Documentation Figure 13. Extruded Walls Library objects were placed in plan and positioned in elevations and sections (Fig. 14). The model for each building was completed by combining all the required library parts included in the HBIM plug-in. The surrounding road and footpaths were created as mesh models directly from segmented laser scan points. The resulting HBIM model can be seen in Fig. 15. After the model has been created automatic 2D heritage documentation can be created in the form of plans, elevations and sections (Fig. 16). 3) Conversion to CityGML The final stage of documentation for this case study involved converting the HBIM model for Henrietta Street into CityGML for further GIS analysis. The steps previously described in section 3 were used for this. The HBIM model was imported into Google SketchUp and converted with the CityGML plug-in for SketchUp. This converted geometry and semantic classes as seen in Fig. 17 below. Further attributes were then added to the xml file. These attributes included function, class, year of construction, description and address for buildings. Attributes for a road class can be seen in Fig. 18 below. The addition of these attributes allows the model to be used as an information system for heritage applications. This model is in an interoperable format that enables sharing of data which is crucial for heritage modeling. This model can be imported into various GIS packages such as ArcGIS to perform further analysis on geometry, semantics, attributes, external references and topology. Figure 14. Mapping Parametric Objects to Survey Data. Figure 17. CityGML Model Showing Semantic Classes. Figure 18. Road Feature Class Showing Associated Attributes. Figure 15. Final HBIM Model 375
9 The use of laser scanning and photogrammetry can record very high and accurate levels of detail in the field for heritage documentation. The HBIM process can automate and speed up the modeling stage by using accurate parametric objects that can be altered and mapped to heritage survey data. As a result of HBIM automated conservation documents such as plans, section and elevation can be produced. Finally the integration to CityGML can provide further capabilities for linking the 3D heritage model to information systems. The CityGML model can be integrated into GIS platforms for efficient management and analysis that is required for maintaining important cultural heritage sites. Figure 19. CityGML Objects IV. NEXT STAGE The stages discussed in the previous section outlined the work done to date on these research areas. Some of the next stages of research are discussed in this section. A. CityGML Extension for HBIM Library Objects One of the problems with using CityGML for heritage applications is that the current feature classes and semantics are not detailed enough for describing heritage/architectural detail. For this reason an extension to the CityGML framework will be developed for HBIM objects and relevant necessary attributes. This extension will be implemented as an Application Domain Extension (ADE). This extension will be different to the ADEs previously developed as the proposed ADE will be specific for architectural heritage and will be more detailed than existing ADEs which do not contain the detailed objects that are contained in the HBIM libraries. This ADE will be very beneficial for semantically modeling detailed heritage objects and their attributes that will be interoperable among many software applications. B. Database Integration Another stage of the research will include the development of a database management system for storing, managing and querying CityGML models. As a result of the CityGML structure the data in the xml file can be converted into tables and stored in tables that can be easily queried and served over the web for sharing data. A database management system also facilitates the efficient storage of a large number of heritage models that could be queried. Finally the database could be used to store additional information such as metadata, original survey data such as laser scan point clouds, orthographic imagery and surface models. V. CONCLUSION The initial results from this research have shown the capabilities for semantic modeling and analysis from the proposed workflow from Laser scan, HBIM to CityGML. The workflow provides new tools and methods for 3D virtual heritage modeling, documentation, management and analysis. REFERENCES [1] Berlo, Lv & Laat, Rd 2010, 'Integration of BIM and GIS: The Development of the CityGML GeobBIM Extension', paper presented to 5th International 3D GeoInfo Conference, November 3-4, 2010,, Berlin, Germany, Berlin, Germany. [2] Boehler, W & Heinz, G 1999, 'Documentation, Surveying, Photogrammetry', paper presented to XVII CIPA Symposium, Olinda, Brazil, 3rd - 6th October 1999,< [3] Chevrier, C, Charbonneau, N, Grussenmeyer, P & Perrin, J-P 'Parametric Documenting of Built Heritage: 3D Virtual Reconstruction of Architectural Details', International Journal of Architectural Computing, vol. 08, no. 02, pp [4] D'Andrea, A 2008, 'Sharing 3D Archaeological Data: Tools and Semantic Approaches', paper presented to 14th International Conference on Virtual Systems and Multimedia, Limassol, Cyprus, October 20th - 25th, [5] De Luca, L 2012, 'Methods, Formalisms and Tools for the Semantic- Based Surveying and Representation of Architectural Heritage', Applied Geomatics, no , pp [6] Delgado, F, Martínez, R, Hurtado, A & Finat, J 2010, 'Extending functionalities of Management Systems to CityGML', in ework and ebusiness in Architecture, Engineering and Construction, CRC Press, pp [7] Fai, S, Graham, K, Duckworth, T, Wood, N & Attar, R 2011, 'Building Information Modelling and Heritage Documentation', paper presented to XXIII CIPA International Symposium, Prague, Czech Republic, 12th- 16th September, < [8] Kolbe, T, Gröger, G & Plümer, L 2005, 'CityGML Interoperable Access to 3D City Models', paper presented to International Symposium on Geo-information for Disaster Management, Delft, The Netherlands, March [9] Kolbe, T 2007, 'CityGML Tutorial', Technical University Berlin. < lbe_internet.pdf> [10] McEnroe, GD 2009, 'A Feasibility Study on CityGML for Cadastral Purposes', Eindhoven University Of Technology. < [11] Murphy M, McGovern E & Pavia, S 2011, 'Historic Building Information Modelling - Adding Intelligence to Laser and Image Based Surveys', paper presented to 4th ISPRS International Workshop, 3D- ARCH 2011: "3D Virtual Reconstruction and Visualization of Complex Architectures" Trento, Italy, 2-4 March [12] Murphy, M, McGovern, E & Pavia, S 2009, 'Historic Building Information Modelling (HBIM)', Structural Survey, vol. 27, no. 4, pp [13] Open Geospatial Consortium Inc. 2008, OpenGIS City Geography Markup Language (CityGML) Encoding Standard, Open Geospatial Consortium Inc., Berlin. < [14] Ulm, K 2010, 'Virtual 3D City Models - satisfaction through sustainability', Geomatics World, vol. 18, no. 6, pp
GIS-based Smart Campus System using 3D Modeling
GIS-based Smart Campus System using 3D Modeling Smita Sengupta GISE Advance Research Lab. IIT Bombay, Powai Mumbai 400 076, India smitas@cse.iitb.ac.in Concept of Smart Campus System Overview of IITB Campus
A Digital Atlas for the Byzantine and Post Byzantine Churches of Troodos Region (central Cyprus)
CAA'2010 Fusion of Cultures Francisco Contreras & Fco. Javier Melero (Editors) A Digital Atlas for the Byzantine and Post Byzantine Churches of Troodos Region (central Cyprus) Agapiou A. 1, Georgopoulos
3D City/Landscape Modeling Non-Building Thematic: Vegetation
3D City/Landscape Modeling Non-Building Thematic: Vegetation Presenter: Shafarina Wahyu Trisyanti shafarina.wahyu@gmail.com Co-Author: Deni Suwardhi, Agung Budi Harto dsuwardhi@kk-insig.org, agung@gd.itb.ac.id
CITYGML MODELLING FOR SINGAPORE 3D NATIONAL MAPPING
CITYGML MODELLING FOR SINGAPORE 3D NATIONAL MAPPING K. H. Soon* and V. H. S. Khoo Land Survey Division, Singapore Land Authority, 55 Newton Road, #12-01, 307987 Singapore - (soon_kean_huat, victor_khoo)@sla.gov.sg
Features and Benefits
Autodesk LandXplorer Features and Benefits Use the Autodesk LandXplorer software family to help improve decision making, lower costs, view and share changes, and avoid the expense of creating physical
GIS-based Smart Campus System using 3D Modeling
GIS-based Smart Campus System using 3D Modeling Hardik Panchal & Rizwan Khan, Smita Sengupta, GISE Advance Lab, Indian Institute of Technology, Bombay, India N.L. Sarda, Dept. Of Computer Science, Indian
Overview of CityGML. Dave Capstick, Ordnance Survey Research Department
Overview of CityGML Dave Capstick, Ordnance Survey Research Department Introduction Why is citygml necessary CityGML development who is responsible? Ordnance Surveys interest 3D modelling basic concepts
GIS Visualization: A Library s Pursuit Towards Creative and Innovative Research
GIS Visualization: A Library s Pursuit Towards Creative and Innovative Research Justin B. Sorensen J. Willard Marriott Library University of Utah justin.sorensen@utah.edu Abstract As emerging technologies
CityGML XFM Application Template Documentation. Bentley Map V8i (SELECTseries 2)
CityGML XFM Application Template Documentation Bentley Map V8i (SELECTseries 2) Table of Contents Introduction to CityGML 1 CityGML XFM Application Template 2 Requirements 2 Finding Documentation 2 To
European Spatial Data Research. EuroSDR. Prof. Dr. Ir. Joep Crompvoets. General Assembly CLGE Tirana 18 March
EuroSDR Prof. Dr. Ir. Joep Crompvoets General Assembly CLGE - 2016 Tirana 18 March 2016 INTRODUCTORY QUESTIONS Who knows what is EuroSDR? Who does NOT know what is EuroSDR? Who is employed at mapping agencies?
Developing 3D Geoportal for Wilayah Persekutuan Iskandar
Developing 3D Geoportal for Wilayah Persekutuan Iskandar Dionnald Beh BoonHeng and Alias Abdul Rahman Department of Geoinformatics, Faculty of Geoinformation Engineering and Sciences, Universiti Teknologi
AUTOMATIC GENERATION OF 3D CITY MODELS AND RELATED APPLICATIONS
International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences, Vol. XXXIV-5/W10 AUTOMATIC GENERATION OF 3D CITY MODELS AND RELATED APPLICATIONS Y. Takase a, *, N. Sho a,
12th AGILE International Conference on Geographic Information Science 2009 page 1 of 9 Leibniz Universität Hannover, Germany
12th AGILE International Conference on Geographic Information Science 2009 page 1 of 9 A Framework for the Generalization of 3D City Models Richard Guercke and Claus Brenner Institute of Cartography and
Imagery and the Location-enabled Platform in State and Local Government
Imagery and the Location-enabled Platform in State and Local Government Fred Limp, Director, CAST Jim Farley, Vice President, Leica Geosystems Oracle Spatial Users Group Denver, March 10, 2005 TM TM Discussion
Pushing the Standards Edge: Collaborative Testbeds to Accelerate Standards Development and Implementation
Pushing the Standards Edge: Collaborative Testbeds to Accelerate Standards Development and Implementation Mark E. Reichardt President mreichardt@opengeospatial.org 31 October 2006 2006 Open Geospatial
Virtual 3D Cities. Chapter VIII. Virtual 3D Cities. 8.1 Introduction. Components. Chapter VIII: Virtual 3D Cities 1
Chapter VIII Virtual 3D Cities 8.1 Introduction 8.2 CityGML 8.3 Google Earth 8.4 Virtual Earth 8.5 Conclusions Virtual 3D Cities 8.1 Introduction 3D Visualization of cities Languages such as CityGML New
3D Cadastre Web Map: Prospects and Developments
3D Cadastre Web Map: Prospects and Developments Trias Aditya, Febri Iswanto, Ade Irawan, Dany Laksono Dept. of Geodesy and Geomatics Engineering Universitas Gadjah Mada (UGM) UGM Why doing 3D Survey &
A Model of GIS Interoperability Based on JavaRMI
A Model of GIS Interoperability Based on Java Gao Gang-yi 1 Chen Hai-bo 2 1 Zhejiang University of Finance & Economics, Hangzhou 310018, China 2 College of Computer Science and Technology, Zhejiang UniversityHangzhou
May 2011 Oracle Spatial User Conference
May 2011 Oracle Spatial User Conference Oracle Spatial User Conference! May 19, 2011 Ronald Reagan Building and International Trade Center Washington, DC USA May 2011 Oracle Spatial User Conference Francois
3D BUILDING MODELS IN GIS ENVIRONMENTS
A. N. Visan 3D Building models in GIS environments 3D BUILDING MODELS IN GIS ENVIRONMENTS Alexandru-Nicolae VISAN, PhD. student Faculty of Geodesy, TUCEB, alexvsn@yahoo.com Abstract: It is up to us to
Innovation. The Push and Pull at ESRI. September Kevin Daugherty Cadastral/Land Records Industry Solutions Manager
Innovation The Push and Pull at ESRI September 2004 Kevin Daugherty Cadastral/Land Records Industry Solutions Manager The Push and The Pull The Push is the information technology that drives research and
Data Conversion to I3S for 3D Modeling from CityGML. Christian Dahmen (con terra GmbH) Satish Sankaran (Esri)
Data Conversion to I3S for 3D Modeling from CityGML Christian Dahmen (con terra GmbH) Satish Sankaran (Esri) 3D Across the ArcGIS Platform Manage Multiscale 3D Models 3D Geodesign ArcGIS for 3D Cities
DATA SOURCES AND INPUT IN GIS. By Prof. A. Balasubramanian Centre for Advanced Studies in Earth Science, University of Mysore, Mysore
DATA SOURCES AND INPUT IN GIS By Prof. A. Balasubramanian Centre for Advanced Studies in Earth Science, University of Mysore, Mysore 1 1. GIS stands for 'Geographic Information System'. It is a computer-based
GIS = Geographic Information Systems;
What is GIS GIS = Geographic Information Systems; What Information are we talking about? Information about anything that has a place (e.g. locations of features, address of people) on Earth s surface,
Large Scale Mapping Policy for the Province of Nova Scotia
Large Scale Mapping Policy for the Province of Nova Scotia December, 2005 Version 1.0 TABLE OF CONTENTS PAGE BACKGROUND...3 POLICY...5 Policy 1.0 Large Scale Mapping Program...5 Policy 2.0 Service Offering...5
Investigating the practical relationship between GIS and BIM; then relating that to a 3D cadastre. J. Gabriel van Wyk, Johan Nel
Investigating the practical relationship between GIS and BIM; then relating that to a 3D cadastre. J. Gabriel van Wyk, Johan Nel Overview So exactly what is BIM? Available BIM offerings in the market Traditional
Web georeference of historical maps
Vassilios Tsioukas Web georeference of historical maps Keywords: Historical maps, Georeference, Cartography, Cartographic Heritage Summary The creation of an application to perform the geo-referencing
3D Urban Information Models in making a smart city the i-scope project case study
UDC: 007:528.9]:004; 007:912]:004; 004.92 DOI: 10.14438/gn.2014.17 Typology: 1.04 Professional Article 3D Urban Information Models in making a smart city the i-scope project case study Dragutin PROTIĆ
Enabling the Image Analyst (IA) to use the geodatabase
Enabling the Image Analyst (IA) to use the geodatabase Rick Racine, BAE Systems, Reston, VA Stewart Walker, BAE Systems, San Diego, CA 2008 ESRI Federal User Conference, Washington, D.C., 21 February 2610020508
CityGML in Detail Part 2
CityGML in Detail Part 2 Prof. Dr. Thomas H. Kolbe Institute for Geodesy and Geoinformation Science Berlin University of Technology kolbe@igg.tu-berlin.de May 2008 EduServ6 Course on CityGML Copyright
Chapter 10: BIM for Facilitation of Land Administration Systems in Australia
Chapter 10: BIM for Facilitation of Land Administration Systems in Australia Sam Amirebrahimi Introduction With the introduction of the concept of 3D Cadastre and extensive efforts in this area, currently
ESRI Survey Summit August Clint Brown Director of ESRI Software Products
ESRI Survey Summit August 2006 Clint Brown Director of ESRI Software Products Cadastral Fabric How does Cadastral fit with Survey? Surveyors process raw field observations Survey measurements define high-order
GENERATION OF 3D CITY MODELS FROM TERRESTRIAL LASER SCANNING AND AERIAL PHOTOGRAPHY: A CASE STUDY
GENERATION OF 3D CITY MODELS FROM TERRESTRIAL LASER SCANNING AND AERIAL PHOTOGRAPHY: A CASE STUDY Hakan KARABORK 1, Fatih SARI 1 1 Selcuk University in Konya, Faculty of Engineering and Architecture Konya,
5A.10 A GEOSPATIAL DATABASE AND CLIMATOLOGY OF SEVERE WEATHER DATA
5A.10 A GEOSPATIAL DATABASE AND CLIMATOLOGY OF SEVERE WEATHER DATA Steve Ansari * and Stephen Del Greco NOAA National Climatic Data Center, Asheville, North Carolina Mark Phillips University of North Carolina
Semantic 3D City Models for Strategic Energy Planning in Berlin & London
Semantic 3D City Models for Strategic Energy Planning in Berlin & London The content of this presentation is provided by Zhihang Yao, Robert Kaden, and Thomas H. Kolbe Chair of Geoinformatics, TU München
The File Geodatabase API. Craig Gillgrass Lance Shipman
The File Geodatabase API Craig Gillgrass Lance Shipman Schedule Cell phones and pagers Please complete the session survey we take your feedback very seriously! Overview File Geodatabase API - Introduction
Web-based Exploration of and Interaction with Large and Deeply Structured Semantic 3D City Models using HTML5 and WebGL
Web-based Exploration of and Interaction with Large and Deeply Structured Semantic 3D City Models using HTML5 and WebGL KANISHK CHATURVEDI 1, ZHIHANG YAO 2 & THOMAS H. KOLBE 1 Abstract: The aim of the
Kentucky Collaborates in GeoMAPP Project: The Advantages and Challenges of Archiving in a State with a Centralized GIS
Kentucky Collaborates in GeoMAPP Project: The Advantages and Challenges of Archiving in a State with a Centralized GIS Geospatial Multistate Archive and Preservation Partnership By Glen McAninch Best Practices
Introduction To A New Geo-Referenced Street Level Content: 3D GEOPANO
Free and Open Source Software for Geospatial (FOSS4G) Conference Proceedings Volume 15 Seoul, South Korea Article 10 2015 Introduction To A New Geo-Referenced Street Level Content: 3D GEOPANO Boram Yoon
3D MAPS SCALE, ACCURACY, LEVEL OF DETAIL
26 th International Cartographic Conference August 25 30, 2013 Dresden, Germany 3D MAPS SCALE, ACCURACY, LEVEL OF DETAIL Prof. Dr. Temenoujka BANDROVA Eng. Stefan BONCHEV University of Architecture, Civil
GENERALIZATION IN THE NEW GENERATION OF GIS. Dan Lee ESRI, Inc. 380 New York Street Redlands, CA USA Fax:
GENERALIZATION IN THE NEW GENERATION OF GIS Dan Lee ESRI, Inc. 380 New York Street Redlands, CA 92373 USA dlee@esri.com Fax: 909-793-5953 Abstract In the research and development of automated map generalization,
Esri UC2013. Technical Workshop.
Esri International User Conference San Diego, California Technical Workshops July 9, 2013 CAD: Introduction to using CAD Data in ArcGIS Jeff Reinhart & Phil Sanchez Agenda Overview of ArcGIS CAD Support
VISUALIZING THE SMART CITY 3D SPATIAL INFRASTRUCTURE GEOSMART ASIA- 30 SEP, 2015
www.aamgroup.com VISUALIZING THE SMART CITY 3D SPATIAL INFRASTRUCTURE GEOSMART ASIA- 30 SEP, 2015 Agenda AAM What is a Smart City? Data Acquisition 3D Modelling Benefits Questions AAM AAM is a Geospatial
Teaching GIS for Land Surveying
Teaching GIS for Land Surveying Zhanjing (John) Yu Evergreen Valley College, San Jose, California James Crossfield California State University at Fresno, Fresno California 7/13/2006 1 Outline of the Presentation
Experiences and Directions in National Portals"
FIG Seminar on e-land Administration Innsbruck/Austria 2-4 June 2004 "ESRI's Experiences and Directions in National Portals" Kevin Daugherty Cadastral/Land Records Manager ESRI Topic Points Technology
Important note To cite this publication, please use the final published version (if applicable). Please check the document version above.
Delft University of Technology Building Information Modelling: essentials and issues The need to Integrate BIM and Geoinformation Zlatanova, Sisi; Isikdag, Umit Publication date 2016 Document Version Early
Geographic information for Strasbourg : from historical land register to 3D GIS city modelling 09/07/2017
Geographic information for Strasbourg : from historical land register to 3D GIS city modelling 09/07/2017 Table of contents 1. Introduction of Strasbourg 2. A century of land surveying and cadastre 3.
Reprint of article that appeared in Hydro INTERNATIONAL November 2006 Volume 10 Issue 9
Reprint of article that appeared in Hydro INTERNATIONAL November 2006 Volume 10 Issue 9 While Google Earth is the best known 3D web-mapping viewer currently in the public domain, there are alternative
DP Project Development Pvt. Ltd.
Dear Sir/Madam, Greetings!!! Thanks for contacting DP Project Development for your training requirement. DP Project Development is leading professional training provider in GIS technologies and GIS application
Bentley Map Advancing GIS for the World s Infrastructure
Bentley Map Advancing GIS for the World s Infrastructure Presentation Overview Why would you need Bentley Map? What is Bentley Map? Where is Bentley Map Used? Why would you need Bentley Map? Because your
Strategies for Integrating CAD and BIM in ArcGIS. Don Kuehne Esri 3D Product Manager: CAD/BIM/AEC
Strategies for Integrating CAD and BIM in ArcGIS Don Kuehne Esri 3D Product Manager: CAD/BIM/AEC CAD Digital Drawing CAD in ArcGIS Desktop CAD in Desktop CAD as Data CAD as a Map EXPORT TO CAD Create and
QGIS FLO-2D Integration
EPiC Series in Engineering Volume 3, 2018, Pages 1575 1583 Engineering HIC 2018. 13th International Conference on Hydroinformatics Karen O Brien, BSc. 1, Noemi Gonzalez-Ramirez, Ph. D. 1 and Fernando Nardi,
Iowa Department of Transportation Office of Transportation Data GIS / CAD Integration
Iowa Department of Transportation Office of Transportation Data GIS / CAD Integration From GIS data to CAD graphics - Iowa DOT's workflow utilizing GeoMedia and MicroStation to develop map products. Mark
Using CAD data in ArcGIS
Using CAD data in ArcGIS Phil Sanchez and Jeff Reinhart Esri UC 2014 Technical Workshop Agenda Overview of ArcGIS CAD Support Using CAD Datasets in ArcMap Georeferencing CAD data for ArcGIS Loading CAD
a system for input, storage, manipulation, and output of geographic information. GIS combines software with hardware,
Introduction to GIS Dr. Pranjit Kr. Sarma Assistant Professor Department of Geography Mangaldi College Mobile: +91 94357 04398 What is a GIS a system for input, storage, manipulation, and output of geographic
Canadian Board of Examiners for Professional Surveyors Core Syllabus Item C 5: GEOSPATIAL INFORMATION SYSTEMS
Study Guide: Canadian Board of Examiners for Professional Surveyors Core Syllabus Item C 5: GEOSPATIAL INFORMATION SYSTEMS This guide presents some study questions with specific referral to the essential
Geoinformation Science at TU Berlin
Technische Universität Berlin Department of Geoinformation Science Geoinformation Science at TU Berlin Prof. Dr. Thomas H. Kolbe Institute for Geodesy and Geoinformation Science Berlin University of Technology
WEB-BASED SPATIAL DECISION SUPPORT: TECHNICAL FOUNDATIONS AND APPLICATIONS
WEB-BASED SPATIAL DECISION SUPPORT: TECHNICAL FOUNDATIONS AND APPLICATIONS Claus Rinner University of Muenster, Germany Piotr Jankowski San Diego State University, USA Keywords: geographic information
ISO Series Standards in a Model Driven Architecture for Landmanagement. Jürgen Ebbinghaus, AED-SICAD
ISO 19100 Series Standards in a Model Driven Architecture for Landmanagement Jürgen Ebbinghaus, AED-SICAD 29.10.2003 The Company 100% SIEMENS PTD SIEMENS Business Services Shareholder & Strategic Business
International 3D Developments. Jantien Stoter Professor 3D GeoInformation
International 3D Developments Jantien Stoter Professor 3D GeoInformation European Spatial Data Research EuroSDR 3D Special Interest Group Active participants: Swisstopo, Ordnance Survey UK, Ordnance Survey
ENV208/ENV508 Applied GIS. Week 1: What is GIS?
ENV208/ENV508 Applied GIS Week 1: What is GIS? 1 WHAT IS GIS? A GIS integrates hardware, software, and data for capturing, managing, analyzing, and displaying all forms of geographically referenced information.
Bentley Map V8i (SELECTseries 3)
Bentley Map V8i (SELECTseries 3) A quick overview Why Bentley Map Viewing and editing of geospatial data from file based GIS formats, spatial databases and raster Assembling geospatial/non-geospatial data
The Next Generation GIS/LIS A Surveys Information System Integrated within a GIS
The Next Generation GIS/LIS A Surveys Information System Integrated within a GIS Michael F. WEIR, USA Key words: Linking, Snapping, GIS, Measurements, Measurement Data, GIS Features, Spatial Quality. SUMMARY
Web-GIS based Framework for Solid Waste Complaint Management for Sustainable and Smart City
Cloud Publications International Journal of Advanced Remote Sensing and GIS 2016, Volume 5, Issue 10, pp. 1930-1936 ISSN 2320-0243, DOI: 10.23953/cloud.ijarsg.71 Research Article Open Access Web-GIS based
From BIM to GIS at the Smithsonian Institution
From BIM to GIS at the Smithsonian Institution Detlef Günther-Diringer a a University of Applied Sciences, Karlsruhe, Germany; Smithsonian Fellow March August 2016; detlef.guenther-diringer@hskarlsruhe.de
CityGML 3D Geospatial and Semantic Modelling of Urban Structures
Technische Universität Berlin CityGML 3D Geospatial and Semantic Modelling of Urban Structures Prof. Dr. Thomas H. Kolbe Institute for Geodesy and Geoinformation Science Berlin University of Technology
ArcGIS Pro 3D Workflows. Zena Pelletier
ArcGIS Pro 3D Workflows Zena Pelletier 3D as a GIS capability Core part of the platform Desktop Web Device Combine 2D and 3D in the same web GIS architecture Reuse dynamic services across clients Securely
Japan Construction Information Center
Japan Construction Information Center A Framework for Data Coordination Method of Maintenance Data and 3D Conceptual Model on CIM Based Database July 2016 Japan Construction Information Center Foundation
Steve Pietersen Office Telephone No
Steve Pietersen Steve.Pieterson@durban.gov.za Office Telephone No. 031 311 8655 Overview Why geography matters The power of GIS EWS GIS water stats EWS GIS sanitation stats How to build a GIS system EWS
A Technique for Importing Shapefile to Mobile Device in a Distributed System Environment.
A Technique for Importing Shapefile to Mobile Device in a Distributed System Environment. 1 Manish Srivastava, 2 Atul Verma, 3 Kanika Gupta 1 Academy of Business Engineering and Sciences,Ghaziabad, 201001,India
Safe to Save? Archive Options for Geodatabases. Jeff Essic North Carolina State University Libraries
Safe to Save? Archive Options for Geodatabases Jeff Essic North Carolina State University Libraries 2011 ESRI International Users Conference July 13, 2011 GeoMAPP Geospatial Multistate Archive and Preservation
K. Zainuddin et al. / Procedia Engineering 20 (2011)
Available online at www.sciencedirect.com Procedia Engineering 20 (2011) 154 158 The 2 nd International Building Control Conference 2011 Developing a UiTM (Perlis) Web-Based of Building Space Management
FUNDAMENTALS OF GEOINFORMATICS PART-II (CLASS: FYBSc SEM- II)
FUNDAMENTALS OF GEOINFORMATICS PART-II (CLASS: FYBSc SEM- II) UNIT:-I: INTRODUCTION TO GIS 1.1.Definition, Potential of GIS, Concept of Space and Time 1.2.Components of GIS, Evolution/Origin and Objectives
Administering your Enterprise Geodatabase using Python. Jill Penney
Administering your Enterprise Geodatabase using Python Jill Penney Assumptions Basic knowledge of python Basic knowledge enterprise geodatabases and workflows You want code Please turn off or silence cell
CAD: Introduction to using CAD Data in ArcGIS. Kyle Williams & Jeff Reinhart
CAD: Introduction to using CAD Data in ArcGIS Kyle Williams & Jeff Reinhart What we will accomplish today Overview of ArcGIS CAD Support Georeferencing CAD data for ArcGIS How Mapping Specification for
Design and Development of a Large Scale Archaeological Information System A Pilot Study for the City of Sparti
INTERNATIONAL SYMPOSIUM ON APPLICATION OF GEODETIC AND INFORMATION TECHNOLOGIES IN THE PHYSICAL PLANNING OF TERRITORIES Sofia, 09 10 November, 2000 Design and Development of a Large Scale Archaeological
From Geographics Stella to Bentley Map Stella Map. Kimmo Soukki, Account Manager Bentley Finland
From Geographics Stella to Bentley Map Stella Map Kimmo Soukki, Account Manager Bentley Finland This presentation Stella? Why migrate? New Bentley Stella Map - How it is done? Data migration Bonuses? What
Key Words: geospatial ontologies, formal concept analysis, semantic integration, multi-scale, multi-context.
Marinos Kavouras & Margarita Kokla Department of Rural and Surveying Engineering National Technical University of Athens 9, H. Polytechniou Str., 157 80 Zografos Campus, Athens - Greece Tel: 30+1+772-2731/2637,
GIS-T 2010 Building a Successful Geospatial Data Sharing Framework: A Ohio DOT Success Story
GIS-T 2010 Building a Successful Geospatial Data Sharing Framework: A Ohio DOT Success Story ODOT District 2 GIS John Puente District 1 GIS Coordinator\ Planning Administrator 2 Interoperability 3 District
3D Laser Scanning for Digital Preservation and Dissemination of Cultural Heritage
3D Laser Scanning for Digital Preservation and Dissemination of Cultural Heritage Main scanned objects - Four Temples of Different Religions in Sofia Eng. Zlatan Zlatanov, Eng. Milush Blagoev, Irina Nikoevska
The Conversion from CityGML to 3D Property Units
Shen YING, Fengzan JIN, Renzhong GUO, Lin LI, Jie YANG and Yujie ZHOU, China Key words: 3D Property Unit, CityGML, 3D Cadastre, Data Conversion SUMMARY Due to the fast growth of building construction technology
You are Building Your Organization s Geographic Knowledge
You are Building Your Organization s Geographic Knowledge And Increasingly Making it Available Sharing Data Publishing Maps and Geo-Apps Developing Collaborative Approaches Citizens Knowledge Workers Analysts
OBJECT BASED IMAGE ANALYSIS FOR URBAN MAPPING AND CITY PLANNING IN BELGIUM. P. Lemenkova
Fig. 3 The fragment of 3D view of Tambov spatial model References 1. Nemtinov,V.A. Information technology in development of spatial-temporal models of the cultural heritage objects: monograph / V.A. Nemtinov,
Data Aggregation with InfraWorks and ArcGIS for Visualization, Analysis, and Planning
Data Aggregation with InfraWorks and ArcGIS for Visualization, Analysis, and Planning Stephen Brockwell President, Brockwell IT Consulting, Inc. Join the conversation #AU2017 KEYWORD Class Summary Silos
Trimble s ecognition Product Suite
Trimble s ecognition Product Suite Dr. Waldemar Krebs October 2010 Trimble Geospatial in the Image Processing Chain Data Acquisition Pre-processing Manual/Pixel-based Object-/contextbased Interpretation
Geospatial Products V8i (SELECTseries 1)
Geospatial Products V8i (SELECTseries 1) Keith Raymond Product Manager Geospatial Desktop Products Presentation Overview What are the various products? Why would you need them? Demonstrations 2 WWW.BENTLEY.COM
Digital Map of Mexico Platform and MxSIG. March 2017
Digital Map of Mexico Platform and MxSIG March 2017 1 I. Digital Map of Mexico Platform Concept Evolution II. Digital Map of Mexico online Concept Capabilities Information available Other state units information
Themes for Geomatics Conference. Geodesy Themes
Themes for Geomatics Conference Geodesy Themes Geodynamics o Modeling the Deformation of the Earth s Crust o Recent Advances in Geometric Approaches to Deformation Analysis o Monitoring Systems (Sensors
USAGE OF OLD MAPS AND THEIR DISTRIBUTION WITHIN THE FRAME OF WEB MAP SERVICES
USAGE OF OLD MAPS AND THEIR DISTRIBUTION WITHIN THE FRAME OF WEB MAP SERVICES Jiri Cajthaml, Jiri Krejci Czech Technical University in Prague, Faculty of Civil Engineering, Department of Mapping and Cartography,
Questions and Answers
AUTODESK LANDXPLORER SOFTWARE FAMILY Questions and Answers The Autodesk LandXplorer 3D city model software family can help you create, analyze, and visualize digital city models. Contents Autodesk Landxplorer
STEREO ANALYST FOR ERDAS IMAGINE Stereo Feature Collection for the GIS Professional
STEREO ANALYST FOR ERDAS IMAGINE Stereo Feature Collection for the GIS Professional STEREO ANALYST FOR ERDAS IMAGINE Has Your GIS Gone Flat? Hexagon Geospatial takes three-dimensional geographic imaging
These modules are covered with a brief information and practical in ArcGIS Software and open source software also like QGIS, ILWIS.
Online GIS Training and training modules covered are: 1. ArcGIS, Analysis, Fundamentals and Implementation 2. ArcGIS Web Data Sharing 3. ArcGIS for Desktop 4. ArcGIS for Server These modules are covered
New Methods for GeoDesign with ArcGIS and CityEngine. Dr. Özgür Ertac, Prof. Dr. Jörg Schaller, Cristina Mattos Tech. Uni. Munich, Esri Germany
New Methods for GeoDesign with ArcGIS and CityEngine Dr. Özgür Ertac, Prof. Dr. Jörg Schaller, Cristina Mattos Tech. Uni. Munich, Esri Germany Agenda Evolution in 3D Introduction 3D Across the ArcGIS Platform
Charter for the. Information Transfer and Services Architecture Focus Group
for the Information Transfer and Services Architecture Focus Group 1. PURPOSE 1.1. The purpose of this charter is to establish the Information Transfer and Services Architecture Focus Group (ITSAFG) as
Karsten Vennemann, Seattle. QGIS Workshop CUGOS Spring Fling 2015
Karsten Vennemann, Seattle 2015 a very capable and flexible Desktop GIS QGIS QGIS Karsten Workshop Vennemann, Seattle slide 2 of 13 QGIS - Desktop GIS originally a GIS viewing environment QGIS for the
DEVELOPMENT OF GPS PHOTOS DATABASE FOR LAND USE AND LAND COVER APPLICATIONS
DEVELOPMENT OF GPS PHOTOS DATABASE FOR LAND USE AND LAND COVER APPLICATIONS An Ngoc VAN and Wataru TAKEUCHI Institute of Industrial Science University of Tokyo 4-6-1 Komaba, Meguro-ku, Tokyo 153-8505 Japan
EXPLORING SUBSET PROFILE AND VALIDATION PROCEDURES OF GEOGRAPHICAL MARKUP LANGUAGE (GML) FOR 3D AREAL PLAN INFORMATION.
www.sgem.org Geoinformatics EXPLORING SUBSET PROFILE AND VALIDATION PROCEDURES OF GEOGRAPHICAL MARKUP LANGUAGE (GML) FOR 3D AREAL PLAN INFORMATION. Assoc. Prof Dr Erling Onstein 1 Assist. Prof Sverre Stikbakke
3D-geodata infrastructure in the city of coburg - Origin process und vision. INGeoForum e.v. Open Geospatial Consortium
INGeoForum e.v. Open Geospatial Consortium at Fraunhofer Institut for Computer Graphics in Darmstadt 3D-geodata infrastructure in the city of coburg - Origin process und vision 29. September 2009 Requirements
This tutorial is intended to familiarize you with the Geomatica Toolbar and describe the basics of viewing data using Geomatica Focus.
PCI GEOMATICS GEOMATICA QUICKSTART 1. Introduction This tutorial is intended to familiarize you with the Geomatica Toolbar and describe the basics of viewing data using Geomatica Focus. All data used in
Geodatabase Programming with Python
DevSummit DC February 11, 2015 Washington, DC Geodatabase Programming with Python Craig Gillgrass Assumptions Basic knowledge of python Basic knowledge enterprise geodatabases and workflows Please turn