NPG-151 IPC-4101C//127

Transcription

1 New: 2014/04/30 Glass cloth base epoxy resin flame retardant copper clad laminate NPG-151 FEATURES Halogen, antimony, and red phosphorous free Flammability meets UL 94 V-0 Excellent thermal resistance and reliability U.L file number E98983 Excellent CAF resistance (Anti-migration) Lower C.T.E will provide excellent through-hole reliability IPC-4101C//127 PERFORMANCE LIST Characteristics Unit Conditioning Typical Values SPEC Test Method Volume resistivity MΩ-cm C-96/35/ x Surface resistivity MΩ C-96/35/ x Permittivity 1 MHZ - C-24/23/ Permittivity 1 GHZ - C-24/23/ Loss Tangent 1 MHZ - C-24/23/ Loss Tangent 1 GHZ - C-24/23/ Arc resistance SEC D-48/50+D-0.5/ Dielectric breakdown KV D-48/ Moisture absorption % D-24/ Flammability - C-48/23/50 94V0 94V0 UL94 Peel strength 1 oz Ib/in 288 x10 solder floating Thermal stress SEC 288 solder dipping Glass transition temp DSC 150 N/A Dimensional stability X-Y axis % E 4/ Coefficient of thermal expansion X-Y axis Z-axis before Tg N/A Z-axis after Tg Decomposition Temperature (Td 5% TGA 380 N/A W/L) NOTE: The average value in the table refers to samples of.020 1/1 Test method per IPC-TM

2 CONSTRUCTION AND 1GHz-10GHz Dk/Df: Mil mm Construction Dk±0.25 DF± GHz 3GHz 5GHz 10GHz 1GHz 3GHz 5GHz 10GHz * * * SP 1067* SR 106* * P 1078* SP 1067* * P 1086* * * * * SP 2116* * * * * * * * * * *1+7628* * * * * * * * Above data shown are nominal values for reference only. PRODUCT SIZE & THICKNESS THICKNESS INCH(mm) COPPER CLADDING OZ (μm) INCH SIZE mm THICKNESS TOLERANCE (0.05) to (1.0) T (12) H (17) 2.0 (70) 1.0 (35) 3.0 (105) 48.8 x x x x x x 1080 IPC-4101C SPEC CLASS C/M Keeping the core and prepreg in the same grain direction is crucial to ensure the flatness of multilayer boards. Grain direction is shown on the Certificate of Conformance. 43

3 Glass cloth base epoxy resin flame retardant prepreg NPG -151B FEATURES Rheology of resin controlled to benefit the lamination of the boards. Modified phosphorous epoxy provides excellent heat and chemical resistance. Other properties are similar to standard FR-4 PERFORMANCE LIST Specification : IPC-4101C is applicable Glass style RC% RF% ± 3 39 ± 5 GT sec (171 ) VC% Dk±0.25 DF± GHz 3GHz 5GHz 10GHz 1GHz 3GHz 5GHz 10GHz MR 74± 3 48 ± HR 76± 3 51 ± / MR 1037MR 106HR 1037HR 70 ± 3 38 ± ± 3 47 ± ± 3 50 ± ± 3 41 ± MR 74 ± 3 50 ± HR 76 ± 3 55 ± ± 3 39 ± MR 67 ± 3 45 ± ± HR 70 ± 3 49 ± ± 3 39 ± MR 67 ± 3 45 ± HR 70 ± 3 49 ± ± 3 38 ± ± 3 34 ± ± 3 28 ± MR 56 ± 3 35 ± HR 60 ± 3 40 ± ± 3 28 ± MR 54 ± 3 35 ± ± 3 22 ± MR 49 ± 3 27 ± HR 52 ± 3 32 ±

4 After Pressed Theoretical Thickness of prepreg (per ply) Copper thickness of inner layer Hoz/1oz/2oz Press Thk Per Ply Hoz Cu (um) 1oz Cu (um) Type RC% 100% 70% 50% 30% 70% 50% 30% % MR 74% HR 76% / % MR/1037MR 74% HR/1037HR 76% % MR 74% HR 76% % MR 67% HR 70% % MR 67% HR 70% % % % % MR 56% HR 60% % MR 54% % MR 49% HR 52% :Considered to be difficult to fill the Cu pattern. You should carefully examine the to mability of prepreg before mass production 2. Due to the pressed thickness could be effected by press related condition, the table showed for reference only. 3. The glass cloth minimum thickness customer must be concerned Storage Condition: 20 50% RH for 3 months. Max 5 for 6 months 45

5 Recommended press cycles: Suggestions: 1. Heating rate of material between 70 (158 ) and 140 (284 ). 1-3 /min (1.8~5.4 /min) is acceptable /min (2.7~4.5 /min) would be better. 2. Temperature of material over 170 (338 ) must be held for at least 60 min to allow resin to fully cure. 3.The pressure should be kept below 100psi during cooling to ambient temperature. 4. Cooling rate of material should be kept under 2.5 /min (4.5 /min) when the temperature of material is over 100 (212 ), in order to avoid introducing twist. CERTIFICATION UL UL File No. : E98983 ANSI TYPE:FR-4.1 UL 746 Recognition Minimum Clad cond. Max. Material Thickness Area Thickness min. max. Diameter Max. Sold Lts UL 94 Inch mils mils inch Operating Temp Time Flame (mm) (mic) (mic) (mm) Temp sec class (0.051) (17) (102) 2.0 (50.8) V-0 46