Interlaboratory Comparison & Proficiency Testing Program
|
|
- Alexandrina Armstrong
- 5 years ago
- Views:
Transcription
1 Extended scope for the organization of proficiency tests in accordance with the requirements of ISO/IEC VSL, the Dutch Metrology Institute, has significantly extended the scope for their accreditation with registration number R006, the organisation of proficiency tests in accordance with the requirements of ISO/IEC VSL has more than 30 years of experience in interlaboratory comparisons. We organize interlaboratory comparisons and proficiency testing (PT) schemes in many different fields, from pressure, mass and viscosity to chemical analysis, and from temperature and humidity to electricity, length and gas flow. As from September 25 th, 2013, the relevant accreditation scope includes all of our calibration capabilities across all technological fields which are listed in our ISO/IEC accredited calibration scope with registration number K999. This means that VSL is now accredited by the Dutch Accreditation Council (RvA) to organize proficiency testing schemes for almost any field. Furthermore VSL can also offer customised service at an unprecedented level. With this new extended scope we have optimized our capabilities to assist (calibration) laboratories to improve and maintain the quality of their services. Intercompany Comparison Service: Comparisons based on your organization's unique needs. With our Intercompany Comparison Service you can organize your own unique interlaboratory comparison for your company, region or country. VSL's Intercompany Comparison Service combines the need for traceability and participating in an interlaboratory Comparisons to your requirements. December Page 1 of 13
2 Chemistry: Gas Analysis O 2 in N 2 (10-22 %) 3 Autumn 2015 Yes SO 2 in N 2 ( ppm) 4 Autumn 2015 Yes NH 3 in N 2 ( ppm) 1 Winter 2015 Yes HCl in N 2 ( ppm) Pilot Winter 2015 No Ethanol in N 2 ( ppm) 1 Winter 2015 Yes Composition of (Liquefied) Natural Gas 33 Spring 2015 Yes 34 Winter 2015 Yes Determination of sulphur compounds in Natural Gas 34 Cancelled Yes 35 Winter 2015 Yes Biogas Pilot Winter 2015 No December Page 2 of 13
3 Chemistry: Gas Analysis Composition of Stack Gas 14 In Progress Yes 15 Winter 2015 Yes Composition of Refinery Gas 14 In Progress Yes 15 Winter 2015 Yes December Page 3 of 13
4 Electrical DC/LF Time & Frequency : Counter 1 Completed No Time & Frequency : Oscillator/generator Yes Calibration of a Digital Multimeter 2 In Progress Yes Simulator for Temperature Sensors 1 Autumn 2015 Yes Calibration of a LCR meter 1 Spring 2015 Yes Calibration of a Power meter 2 In Progress Yes Inductance /2016 Yes Resistance 1 Summer 2015 Yes December Page 4 of 13
5 Electrical HF HF Power 1 Completed No 2 Autumn 2015 Yes RF-S parameters 2 Spring 2015 Applied December Page 5 of 13
6 Environmental Volatile Organic Compounds 10 In Progress Yes 11 Winter 2015 Yes Semi Volatile Organic Compounds Pilot Autumn 2015 Applied 36 In Progress No ROAS - Asbestos fibre counting 37 Spring 2015 No 38 Winter 2015 No 60 In Progress No 61 Spring 2015 No RIAB - Asbestos Identification in Raw Materials 62 Summer 2015 No 63 Autumn 2015 No 64 Winter 2015 No December Page 6 of 13
7 Mass Weights of OIML Class F1 (2 kg, 200g, 50 g, 1 g, 200 mg) Weights of OIML class F1 and M1 (100 g, 2 kg, 5 kg, 20 kg) Non Automatic Weighing Instruments (NAWI) Calibration of a balance (0 60 kg) Non Automatic Weighing Instruments (NAWI) Calibration of a balance (0 10 kg) 2 Completed No 3 Spring 2015 Open for registration Yes 1 Completed No 2 Winter 2014/2015 Open for registration No December Page 7 of 13
8 Temperature Temperature Block Calibrator 2 Completed Yes 3 Spring 2016 Yes Type S thermocouple 2 Completed Yes 3 Winter 2015 Yes Liquid-in-glass thermometer 2 Completed ( -80 C ; +400 C) Yes 3 Summer 2015 Yes Dew point meter 2 Closed Yes 3 Summer 2015 No brochure yet available Yes Data logger (Relative humidity & temperature) 2 Completed Yes 3 In Progress Yes December Page 8 of 13
9 Temperature Digital thermometer & IPRT 2 Completed Yes 3 In Progress ( -80 C ; +400 C) Yes Pt Winter 2015 Yes December Page 9 of 13
10 Pressure Calibration of a pressure gauge, range (0 200) hpa g 1 Completed Yes 2 Summer 2016 Yes Calibration of a barometer - ( ) hpa a 3 In Progress Yes (10 100) MPa g 1 Summer 2015 Yes (0 5) MPa 2 Completed Yes 3 Winter 2015 Yes December Page 10 of 13
11 Optical Gasflow Flow of Liquids Coriolis flowmeter ( L/min) 1 Spring 2015 Yes December Page 11 of 13
12 Ionising radiation and radioactivity Personal Dosemeter (ISO 4037) - Continues Yes Photon beam (1-25 MV) - Continues On site Applied Radiochromic film and phantom - Continues Applied Dimensional Calibration of gauge blocks 1 In Progress Yes Laser Distance Measurer 1 Winter 2015 Applied Complete 2015 schedule not yet determined December Page 12 of 13
13 Volume Micropipettes 3 Completed No 4 Spring 2015 No Pycnometer 1 Spring 2015 Yes Volumetric flask 1 Spring 2015 Yes Force Calibration of a Force transducer 1 Summer 2015 No December Page 13 of 13
Interlaboratory Comparison & Proficiency Testing Program
Extended scope for the organization of proficiency tests in accordance with the requirements of ISO/IEC 17043 VSL, the Dutch Metrology Institute, has significantly extended the scope for their accreditation
More informationInterlaboratory Comparison & Proficiency Testing Program
Extended scope for the organization of proficiency tests in accordance with the requirements of ISO/IEC 17043 VSL, the Dutch Metrology Institute, has significantly extended the scope for their accreditation
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Compania Nacional de Metrologia S.A.S - Conamet
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Laboratory locations: Schedule of Accreditation 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Unit 1G Kilroot Business Park Carrickfergus Co Antrim BT38 7PR Contact: Mr R E Hughes Tel:
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 CONTROL COMPANY 12554 Galveston Road Suite B230 Webster, TX 77598 Aaron Judice Phone: 281 482 1714 CALIBRATION Valid To: March 31, 2018
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: Palenque 1 A, Bello Horizonte,. (Hereinafter called
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. 705.00 Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc., has assessed the Laboratory of: (Hereinafter called the Organization) and
More informationQuality assurance for sensors at the Deutscher Wetterdienst (DWD)
Quality assurance for sensors at the Deutscher Wetterdienst (DWD) Quality assurance / maintenance / calibration Holger Dörschel, Dr Tilman Holfelder WMO International Conference on Automatic Weather Stations
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of:. Av. Rio Consulado # 2614, Col. San Juan de Aragón
More informationCALIBRATION CENTER. Republic of Turkey. Ministry of Forestry and. Water Affairs. Turkish State Meteorological Service.
Republic of Turkey Ministry of Forest and Water Affairs Republic of Turkey Ministry of Forestry and Water Affairs Turkish State Meteorological Service CALIBRATION CENTER Turkish State Meteorological Service
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: Asesoría Industrial en Mantenimiento y Calibración
More informationCertificate of Accreditation to ISO/IEC 17025:2005
United States Department of Commerce National Institute of Standards and Technology Certificate of Accreditation to ISO/IEC 17025:2005 NVLAP LAB CODE: 200508-0 Insco Metrology, Inc. Miami, FL is accredited
More informationGuidelines on the Calibration of Automatic Instruments for Weighing Road Vehicles in Motion and Measuring Axle Loads AWICal WIM Guide May 2018
Guidelines on the Calibration of Automatic Instruments for Weighing Road Vehicles in Motion and Measuring Axle Loads AWICal WIM Guide May 2018 Guidelines on the Calibration of Automatic Instruments for
More informationPortuguese Institute for Quality. Contents
Instituto Português da PORTUGUESE INSTITUTE FOR QUALITY ualidade Final Report Bilateral comparison of a 500 µl micropipette EUROMET Project no. 1004 IPQ Coordinator of the comparison Elsa Batista September
More informationIntroduction of RIC Tsukuba (Japan, RAII)
Introduction of RIC Tsukuba (Japan, RAII) 20 March, 2018 Kouichi NAKASHIMA Scientific Officer Regional Instrument Centre Tsukuba Observing Division, Observing Department Outline 1. Overview of Organization
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: AMC LABS S.A de C.V (Hereinafter called the Organization)
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: Guadalupe, Nuevo León, México. C.P. 67110 (Hereinafter
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of:. (Hereinafter called the Organization) and hereby
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: Ciudad Madero, Tamaulipas, México. C.P. 89520 (Hereinafter
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares
More informationQuality assurance for sensors at the Deutscher Wetterdienst (DWD)
Paper submitted to ICAWS 2017: Topic 3 Sustainability of the measurements: Calibration, intercomparisons, laboratory and field performance tests, quality assurance and control assessment for traceable
More informationCalibration, traceability, uncertainty and comparing measurement results. Workshop 16 March 2015 VSL, Delft The Netherlands
Calibration, traceability, uncertainty and comparing measurement results Workshop 16 March 2015 VSL, Delft The Netherlands 1 Calibration Calibrating an instrument involves comparing the measurements of
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Hards Laboratories cc, t/a Technology Solutions
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 EQUIPMENT SERVICES GROUP, LLC 3269 Hilton Rd. Ferndale, MI 48220 Michael Macauley Phone: 248 227 5310 CALIBRATION Valid To: December
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 & ANSI/NCSL Z540.3-2006 JEM PRECISION 9615 56 Avenue NW Edmonton, Alberta T6E 0B2 Canada Robert Korthuis Phone: 780-440 1933 CALIBRATION
More informationAckred. nr 1678 Kalibrering ISO/IEC 17025
Calibration Tvinnargatan 25 SE-507 30 Brämhult SWEDEN Phone: +4633 22 56 30 info@kalibrera.se www.kalibrera.se Ackred. nr 1678 Kalibrering ISO/IEC 17025 Our calibration lab is accredited by Swedac for:
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 PROTEMP MECHANICAL, INC. 3350 Scott Blvd, Bldg. #3 Santa Clara, CA 95054 Martin L. Reich Phone: 408 244 9821 CALIBRATION Valid To: August
More informationCALIBRATION CERTIFICATE # 503
CALIBRATION CERTIFICATE # 503 Calibration date : 2011-02-23 Certificate issued : 2012-04-18 Company name Company address City, Province, Canada CLAS 2009-02 Calibration of Mass flow meter Micro Motion
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. ADVANCED TECHNOLOGY SERVICES HMA 1800 Honda Drive Lincoln, AL Lasheila Hayes Phone:
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ADVANCED TECHNOLOGY SERVICES HMA 1800 Honda Drive Lincoln, AL 35096 Lasheila Hayes Phone: 205 505 0296 CALIBRATION Valid to: April 30, 2019 Certificate Number:
More informationA61-02 CALA Guidance on Traceability Revision 1.2 October 15, 2012
Revision 1.2 October 15, 2012 PAGE II TABLE OF CONTENTS TABLE OF CONTENTS... 1 GUIDANCE...2 1.0 Introduction... 2 2.0 Uncertainty and Traceability... 2 3.0 Need for Traceability... 3 3.1 What does traceability
More informationTS02 - Pre-Instructional Survey
TS02 - Pre-Instructional Survey 1. Which type of drawing provides detailed piping and process information, including wire terminations? a. Loop Wiring Diagrams b. Piping and Instrument Diagrams (P&IDs)
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: AMC LABS S.A de C.V Av. México # 329 Col. Valle De
More informationMeasurements & Instrumentation. Module 3: Temperature Sensors
Measurements & Instrumentation PREPARED BY Academic Services Unit August 2013 Institute of Applied Technology, 2013 Module Objectives Upon successful completion of this module, students should be able
More informationDetermination of Total Bromine and Iodine Emission Spectrometric Method (ICP-OES) EuSalt/AS
Determination of Total Bromine and Iodine Page 2 of 5 1. SCOPE AND FIELD OF APPLICATION The present EuSalt Analytical Standard describes an inductively coupled plasma optical emission spectrometry method
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 FLORIDA METROLOGY, LLC 645 NW Enterprise Dr. Port St. Lucie FL 34986 Ron Kupper Phone: (772)212-7158 CALIBRATION Valid To: October 31,
More informationWorld Meteorological Organization
World Meteorological Organization CIMO/WIGOS EXPLORATORY WORKSHOP: IMPROVING SURFACE-BASED DATA QUALITY THOUGH IMPROVED STANDARDIZATION OF PRACTICES AND PROCEDURES Langen, Germany, 5-3 December 2014 Regional
More informationRECENT ILC ACTIVITY IN ROMANIAN MASS MEASUREMENTS
The Fifth International Proficiency Testing Conference Timisoara, Romania () th 8 th September, 0 RECENT ILC ACTIVITY IN ROMANIAN MASS MEASUREMENTS Adriana Vâlcu, Sterică Baicu National Institute of Metrology,
More informationNEW VSL Conditioning plate!
Calibration of Prover Tanks using a Coriolis Mass Flow Meter as the Master Meter. Is this possible for Pipe Prover calibration too? Erik Smits (fsmits@vsl.nl) 2 nd European Flow Measurement Workshop Sintra,
More informationNew Thermometer Guidance Document from AASHTO Accreditation Program. Maria Knake Asphalt Binder ETG Meeting May 10, 2018
New Thermometer Guidance Document from AASHTO Accreditation Program Maria Knake Asphalt Binder ETG Meeting May 10, 2018 Background Mercury reduction initiatives have hastened the need to find suitable
More informationJ3/2006. Mass Comparison: 610 g laboratory balance. Kari Riski Leena Stenlund Mittatekniikan keskus
J3/2006 Mass Comparison: 610 g laboratory balance Kari Riski Leena Stenlund Mittatekniikan keskus Espoo 2006 Publication J3/2006 Mass Comparison: 610 g laboratory balance Kari Riski Leena Stenlund Mittatekniikan
More informationA Sub-millikelvin Calibration Facility in the Range 0 C to 30 C
Int J Thermophys (2017) 38:37 DOI 10.1007/s10765-016-2171-9 TEMPMEKO 2016 A Sub-millikelvin Calibration Facility in the Range 0 C to 30 C R. Bosma 1 A. Peruzzi 1 R. Van Breugel 1 C. Bruin-Barendregt 1
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 AMERICAN INSTRUMENT CORPORATION Crossroads Centre 702 Rose Drive Hartland, WI 53029 Jeff Quinn Phone: 262 367 4409 CALIBRATION Valid
More informationMason Technology Ltd
Mason Technology Ltd 228 South Circular Road, Dublin 8 Calibration Laboratory Registration number: 043C is accredited by the Irish National Board (INAB) to undertake calibration as detailed in the Schedule
More informationReference Materials and Proficiency Testing. CropLife International Meeting October 2015 Gina M. Clapper
Reference Materials and Proficiency Testing CropLife International Meeting 15-16 October 2015 Gina M. Clapper Approaches to Improving and Demonstrating Method and Laboratory Performance Analytical quality
More informationFor the National Voluntary Laboratory Accreditation Program
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 Additel Corporation 2900 Saturn Street Brea, CA 92821 Eric Chavier Phone: 714-998-6899 Fax: 714-998-6999 E-mail: eric.chavier@additel.com URL: http://additel.com
More information: INSTRUMENTATION AND PROCESS CONTROL COURSE CODE : 6071 COURSE CATEGORY : A PERIODS/ WEEK : 5 PERIODS/ SEMESTER : 75 CREDIT : 5 TIME SCHEDULE
COURSE TITLE : INSTRUMENTATION AND PROCESS CONTROL COURSE CODE : 6071 COURSE CATEGORY : A PERIODS/ WEEK : 5 PERIODS/ SEMESTER : 75 CREDIT : 5 TIME SCHEDULE MODULE TOPIC PERIODS 1 Measuring Instruments
More informationScope of Accreditation For ISOLAB Inc. Calibration
Scope of Accreditation For ISOLAB Inc 6260 Hawthorne Dr Windsor, ON N8T 1J9 Pradip Jansari 519-948-8371 In recognition of a successful assessment to ISO/IEC 17025:2005 to the following and Measurement
More informationProblem 1 in the section "self-thinking" Team «MG 12»
Problem 1 in the section "self-thinking" Team «MG 12» 1 Problem 1 in the section "self-thinking" Calculate the error in the measurement of mass of object by balance, taking into account external factors.
More informationH1: Metrological support. Milena Horvat, Polona Vreča, Tea Zuliani, Radojko Jaćimović, Radmila Milačič
H1: Metrological support Milena Horvat, Polona Vreča, Tea Zuliani, Radojko Jaćimović, Radmila Milačič Basic requirement How to ensure appropriate measurements and monitor changes in time and space? Analytical
More informationCONTENT 2. ORGANIZATION 3. SERVICES. instruments. (3)Activities of RIC Tsukuba
1 CONTENT 1. INTRODUCTION 2. ORGANIZATION 3. SERVICES (1)Quality assurance of meteorological instruments (2)Research and development (3)Activities of RIC Tsukuba 2 Meteorological Instruments Center (MIC)
More informationCOMPARISON OF INMETRO AND INTI HUMIDITY STANDARDS. Final Report
SIM.T-K6.4 INMETRO / INTI Final Report COMPARISON OF INMETRO AND INTI HUMIDITY STANDARDS Final Report Instituto Nacional de Metrologia, Qualidade e Tecnologia (INMETRO) Instituto Nacional de Tecnología
More information2.1. Accuracy, n- how close the indication of the thermometer is to the true value.
AASHTO Accreditation Policy and Guidance on Thermometer Selection and Records Revised: January 25, 2018 Revision #: 0 1. Objective 1.1. The purpose of this document is to clearly define acceptance criteria
More informationChapter 1 - Basic Concepts. Measurement System Components. Sensor - Transducer. Signal-conditioning. Output. Feedback-control
Chapter 1 - Basic Concepts Measurement System Components Sensor - Transducer Signal-conditioning Output Feedback-control MeasurementSystemConcepts.doc 8/27/2008 12:03 PM Page 1 Example: Sensor/ Transducer
More informationHp(0.07) Photon and Beta Irradiations for the EURADOS Extremity Dosemeter Intercomparison 2015
Hp(0.07) Photon and Beta Irradiations for the EURADOS Extremity Dosemeter Intercomparison 2015 Leon de Prez and Frans Bader VSL - The Netherlands www.vsl.nl P 1 Contents - Introduction to VSL and Ionizing
More information792A AC/DC Transfer Standard
92A AC/DC Transfer Standard Technical Data Support for your most demanding ac measurement requirements ppm total uncertainty Traceable to national standards range: 2 mv to 00 V Frequency range: Hz to 1
More information792A AC/DC Transfer Standard
92A AC/DC Transfer Standard Technical Data Support for your most demanding ac measurement requirements ppm total uncertainty Traceable to national standards range: 2 mv to 00 V Frequency range: Hz to 1
More informationSERVICES OF DMDM I CALIBRATION MASS PRESSURE... 21
SERVICES OF DMDM I CALIBRATION... 2 1. MASS... 2 2. PRESSURE... 2 3. LENGHT & ANGLE... 3 4. ACOUSTICS... 4 5. TIME, FREQUENCY & VELOCITY... 5 6. VOLUME... 6 7. TEMPERATURE... 7 8. HUMIDITY... 9 9. ELECTIRICITY/DC
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 QAL-TEK ASSOCIATES 3998 Commerce Circle Idaho Falls, ID 83401 Travis Snowder Phone: 208 523 5557 CALIBRATION Valid To: January 31, 2019
More information1. Mark the correct statement(s)
1. Mark the correct statement(s) Figure to the right shows a mass measurement scale using a spring. 1.1 The span of the scale is a) 16 kg b) 21 kg c) 11 kg d) 5-16 kg 1.2 The range of the scale is a) 16
More informationTraining Benefits Adding Values to Your Systems/ Organization through: Potential Attendees These Courses have been designed for;
Potential Attendees These Courses have been designed for; Calibration engineers and Technicians. Training Benefits Adding Values to Your Systems/ Organization through: Planning Engineers and decision makers.
More informationSupplementary comparison SIM.M.FF-S12. Final Report for Volume of Liquids at 20 L
Supplementary comparison SIM.M.FF-S12 Final Report for Volume of Liquids at 20 L Pilot: M. Maldonado (CENAM, Mexico) mmaldona@cenam.mx km 4.5 Carretera a los Cués, El Marqués, Qro 76241, Mexico Participants:
More informationOverviewofRIC Tsukuba (Japan,RAII )
OverviewofRIC Tsukuba (Japan,RAII ) 7Nov.2016 Hiroshi Yoshimura Scientific Officer Regional Instrument Centre Tsukuba Observing Division, Observing Department Outline 1. WMO Regional Instrument Center
More informationGaseous CEMS technology
GAS CEMS EXTRACTIVE IN-SITU COLD DRY HOT WET DRY DILUTION PROBE/ POINT IN-STACK CROSS STACK OUT OF STACK Gaseous CEMS technology Probe (at stack) Heated filter Heated sample line Condenser Pump Analyzers
More informationSeries tore word. Acknowledgements
Series tore word p. xi Preface p. xiii Acknowledgements p. xv Disclaimer p. xvii Introduction p. 1 The instrumental age p. 2 Measurements and the climate record p. 2 Clouds and rainfall p. 3 Standardisation
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 RS CALIBRATION SERVICES, INC. 1047 Serpentine Lane Pleasanton, CA 94566 Mr. Ralph Sabiel Phone: 925 462 4217 CALIBRATION Valid To: April
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 POLYMER TESTING INSTRUMENTS, INC. 10 National Drive Fletcher, NC 28732 Larry Eisner Phone: 828 252 1326 CALIBRATION Valid To: June 30,
More informationEURAMET Project no Inter-comparison of a 1000 L proving tank
EURAMET Project no. 1157 Inter-comparison of a 1000 L proving tank Final Report IPQ (Elsa Batista) Coordinator of the comparison VSL (Erik Smits) Pilot and coordinator of the comparison September 2013
More informationAcoustics and Ionising Radiation Formulation and Strategy. 13 November 2008 Alan DuSautoy
Acoustics and Ionising Radiation Formulation and Strategy 13 November 2008 Alan DuSautoy Contents What is the future of Programme Formulation? What is Rolling Formulation? Programme Overview Roadmaps Future
More informationLaboratory ID. Laboratory Name. Address. Phone. Lab Manager/Supervisor. QA Officer. Analyst(s) Auditor. Date(s) of Audit
Method(s): Laboratory ID Laboratory Name Address Phone Lab Manager/Supervisor QA Officer Analyst(s) Auditor Date(s) of Audit NEW JERSEY DEPARTMENT OF ENVIRONMENTAL PROTECTION OFFICE OF QUALITY ASSURANCE
More informationEvaluating New Generation Vibrating Tube Sensor for Density Measurement under Process Conditions
Products Solutions Services Evaluating New Generation Vibrating Tube Sensor for Density Measurement under Process Conditions Dr. Alfred Rieder, Slide 1 Overview Introduction Process meter Features Working
More informationExperimentation. Third Edition. Wheeler. Ahmad R. Ganji. School of Engineering. With Third Edition contributions by. V. V. Krishnan. Brian S.
Introduction to Engineering Experimentation Third Edition Anthony J. Ahmad R. Wheeler Ganji School of Engineering San Francisco State University With Third Edition contributions by V. V. Krishnan San Francisco
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 POLYMER TESTING INSTRUMENTS, INC. 74 Patton Ave. Asheville, NC 28801 Greg Skory Phone: 828 252 1326 CALIBRATION Valid To: June 30, 2017
More informationCommissioning of the Beta Secondary Standard (BSS2)
Commissioning of the Beta Secondary Standard (BSS2) Speaker / Author: R.W. Thoka* Co-author: S. Jozela* * National Metrology Institute of South Africa (NMISA), Private Bag X 34, Lynnwood Ridge, Pretoria,
More informationTowards SI traceable humidity measurements with radiosondes
VTT TECHNICAL RESEARCH CENTRE OF FINLAND LTD Centre for Metrology MIKES MIKES METROLOGY Towards SI traceable humidity measurements with radiosondes GRUAN ICM-9, MeteoMet Training Course FMI, Helsinki,
More informationOA03 UNCERTAINTY OF MEASUREMENT IN CHEMICAL TESTING IN ACCORDANCE WITH THE STANDARD SIST EN ISO/IEC Table of contents
UNCERTAINTY OF MEASUREMENT IN CHEMICAL TESTING IN ACCORDANCE WITH THE STANDARD SIST EN ISO/IEC 17025 Table of contents 1 GENERAL... 2 2 THE STANDARD SIST EN ISO/IEC 17025... 2 3 SA'S POLICY IN IMPLEMENTING
More informationSTATISTIQUE DE PERFORMANCE
INTERCOMPARISON OF STANDARD CALIBRATION, METHODS AND MEASUREMENTS FOR PRESSURE, TEMPERATURE AND HUMIDITY BETWEEN RIC CASABLANCA, MOROCCO AND RIC Ljubljana SLOVENIA 3(10) azizmounir@gmail.com The operators
More informationEstablishing traceability and estimating measurement uncertainty in physical, chemical and biological measurements
Establishing traceability and estimating measurement uncertainty in physical, chemical and biological measurements Experimental Design 8.2.2013 Doc. Martti Heinonen etunimi.sukunimi@mikes.fi Outline 1.
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: CONMED LABMET S. de R.L. de C.V. (Hereinafter called
More informationCalibration Models and Uncertainty Analysis of the Euroloop Liquid Hydrocarbon Flow Facility
Calibration Models and Uncertainty Analysis of the Euroloop Liquid Hydrocarbon Flow Facility Jos van der Grinten 1 and Bart van der Stap 2 1 NMi EuroLoop, Petroleumweg 36, 3196 KD Rotterdam-Vondelingenplaat,
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. ALLOMETRICS, INC Bayport Blvd. Seabrook, TX Terry Baldwin Phone: CALIBRATION
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ALLOMETRICS, INC. 2500 Bayport Blvd. Seabrook, TX 77586 Terry Baldwin Phone: 281 474 3329 CALIBRATION Valid To: April 30, 2019 Certificate Number: 2039.01 In
More informationCALIBRATION. Calibration. General Principles & Theory, Equipment Considerations. Copyright Caltech 2014
Calibration General Principles & Theory, Equipment Considerations Metrological Principles Accurate but not Precise Calibration A A+ Correction = Precise but not Accurate Correction B Ref Std (Radio Link
More informationSTATUS OF THE WIGOS DEMONSTRATION PROJECTS
STATUS OF THE WIGOS DEMONSTRATION PROJECTS Demonstration Project Morocco Strengthening Moroccan RIC Capacities (Submitted by Rabia Merrouchi, National Meteorological Service of Morocco (DMN)) February
More information55 Acid base titration: Polyprotic acids, determination of the molar concentration of phosphoric acid in cola
Sensors: Loggers: Drop / Bubble counter, ph Any EASYSENSE Biology Logging time: EasyLog Teacher s notes 55 Acid base titration: Polyprotic acids, determination of the molar concentration of phosphoric
More informationAPPENDIX G EVALUATION OF MEASUREMENT UNCERTAINTY
APPENDIX G EVALUATION OF MEASUREMENT UNCERTAINTY Table of Contents 1. SCOPE... 2 2. REFERENCES... 2 3. TERMS AND DEFINITIONS... 2 4. BACKGROUND... 4 5. EVALUATION OF MEASUREMENT UNCERTAINTY POLICY... 5
More informationTechnical Protocol of the Bilateral Comparison in Primary Angular Vibration Calibration CCAUV.V-S1
Technical Protocol of the Bilateral Comparison in Primary Angular Vibration Calibration CCAUV.V-S1 Updated at 12-December-2012 Task and Purpose of the Comparison According to the rules set up by the CIPM
More informationIntroductions to RIC-Beijing. NAN Xuejing, CUI Xiai Meteorological Observation Center China Meteorological Administration March,2018
Introductions to RIC-Beijing NAN Xuejing, CUI Xiai China Meteorological Administration March,2018 Contents 1. China Meteorological Administration (CMA) Organization 2. (MOC) Functional Structure Responsibilities
More informationบร การสอบเท ยบ และทดสอบเคร องม อว ด
NSCTISITIS70 CALIBRATION 0008 บร การสอบเท ยบ และทดสอบเคร องม อว ด http://www.tpa.or.th/ce/ สมาคมส งเสร มเทคโนโลย (ไทยญ ป น) Technology Promotion Association (ThailandJapan) Accredited Laboratory ISO/IEC
More informationThis annex is valid from: to Replaces annex dated: Location(s) where activities are performed under accreditation
Wiltonstraat 25 3905 KW Veenendaal The Netherlands Location(s) where activities are performed under accreditation Head Office Location Abbreviation/ location Main Location Wiltonstraat 25 3905 KW Veenendaal
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 MTS FIELD SERVICE 14000 Technology Drive Eden Prairie, MN 55344 Hugh Casper Phone: 518 852 3977 CALIBRATION Valid To: September 30,
More informationINTERNATIONAL OIML D 25 DOCUMENT. Vortex meters used in measuring systems for fluids ORGANISATION INTERNATIONALE INTERNATIONAL ORGANIZATION
INTERNATIONAL OIML D 25 DOCUMENT Edition 1996 (E) Vortex meters used in measuring systems for fluids Compteurs à vortex utilisés dans les ensembles de mesurage de fluides OIML D 25 Edition 1996 (E) ORGANISATION
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 ARCONIC POWER AND PROPULSION RESEARCH CENTER 1500 S. Warner St. Whitehall, MI 49461-1895 Michelle McDonald Phone: 231 894 7586 CALIBRATION
More informationMICHELL TECHNOLOGIES FOR MOISTURE. Calibration. General Principles & Theory, Equipment Considerations
Calibration General Principles & Theory, Equipment Considerations Metrological Principles Accurate but not Precise Calibration A A+ Correction = Precise but not Accurate Correction B Ref Std (Radio Link
More informationMason Technology Ltd
Mason Technology Ltd 228 South Circular Road, Dublin 8 Calibration Laboratory Registration number: 043C is accredited by the Irish National Board (INAB) to undertake calibration as detailed in the Schedule
More informationREPORT issued by an Accredited Testing Laboratory
issued by an Accredited Testing Laboratory Contact person RISE Tobias Eriksson 2017-03-02 6P07577-25-rev1 1 (3) Energy and circular economy +46 10 516 57 07 tobias.eriksson@ri.se Camfil AB Industrigatan
More informationINSTITUTE OF AERONAUTICAL ENGINEERING (Autonomous) Dundigal, Hyderabad
INSTITUTE OF AERONAUTICAL ENGINEERING (Autonomous) Dundigal, Hyderabad -500 043 MECHANICAL ENGINEERING TUTORIAL QUESTION BANK Name : INSTRUMENTATION AND CONTROL SYSTEMS Code : A70343 Class : IV B. Tech
More informationProject: CООМЕТ 390/BY/07. SUPPLEMENTARY COMPARISON OF STANDARDS OF THE UNIT FOR LENGTH (METRE) IN THE MEASUREMENT RANGE FROM 0,1 TO 100 mm
September 2011 Proect: CООМЕТ 390/BY/07 SUPPLEMENTARY COMPARISON OF STANDARDS OF THE UNIT FOR LENGTH (METRE) IN THE MEASUREMENT RANGE FROM 0,1 TO 100 mm COOMET.L-S7 DRAFT B REPORT Pilot laboratory: Belarusian
More informationMASS AND VOLUME COMPARISONS AT MIKES
MITTATEKNIIKAN KESKUS CENTRE FOR METROLOGY AND ACCREDITATION Julkaisu J4/2000 MASS AND VOLUME COMPARISONS AT MIKES Additional results to the EA intercomparison of weights 1 mg 100 g (Ma1) and to the EUROMET
More information