Introduction of RIC Tsukuba (Japan, RAII)

Transcription

1 Introduction of RIC Tsukuba (Japan, RAII) 20 March, 2018 Kouichi NAKASHIMA Scientific Officer Regional Instrument Centre Tsukuba Observing Division, Observing Department

2 Outline 1. Overview of Organization Main services Quality Assurance of Meteorological Instruments Research and Development Responsibilities as WMO/RIC Tsukuba 2. Introduction of RIC Tsukuba RIC website Collaboration between RICs Services for Members Future plan,etc.

3 Outline 1. Overview of Organization Main services Quality Assurance of Meteorological Instruments Research and Development Responsibilities as WMO/RIC Tsukuba 2. Introduction of RIC Tsukuba RIC website Collaboration between RICs Services for Members Future plan,etc.

4 Location of MIC Tsukuba AIST NMIJ Meteorological Research Institute Aerological Observatory GRUAN WMO/RRC Tokyo MIC WMO/RIC Tsukuba Tokyo MIC Test Field Japan

5 Development of MIC A unique institution responsible for development of the meteorological instrumentation of JMA Former MIC, 1956 Present MIC, Established 1975 Moved to Tsukuba 2012 Acquired ISO/IEC accreditation MIC had produced meteorological instruments Designated as WMO/RIC Tsukuba

6 Organizational structure of JMA Director-General Deputy Director-General Headquarters Field Offices Auxiliary Organs Administration Department Administration Division Regional Headquarters Meteorological Research Institute Forecast Department Observation Department Seismology and Volcanology Department Global Environment and Marine Department Office of Data and Information Services Observation Division Office of Observing Systems Operation Meteorological Instrument Center Office of Aviation Weather Observation Local Meteorological Offices Weather Stations Aviation Weather Service Centers Aviation Weather Stations Meteorological Satellite Center Aerological Observatory Magnetic Observatory Satellite Program Division Meteorological College 6

7 Organizational structure of MIC Director Deputy Director Administration Section Senior Scientific Officer Inspection Section 1 Senior Instrument Inspector Inspection Section 2 Inspection Section 3 Test Section 1 Test Section 2 ( Total 22 staffs ) RIC Section

8 Main Services of MIC Quality Assurance of Meteorological Instruments To inspect meteorological equipment and to maintain standard instruments and their traceability, to ensure highprecision meteorological observations in Japan. Research and Development (R&D) To carry out research and development of instruments and suitable methods and environment for observation. Responsibilities as WMO/RIC Tsukuba To assist Members of RA II (Asia) through calibration and comparison with meteorological instruments, and to conduct training for the Members for fostering specialists in the instrument.

9 Main Services of MIC Quality Assurance of Meteorological Instruments To inspect meteorological equipment and to maintain standard instruments and their traceability, to ensure highprecision meteorological observations in Japan. Research and Development (R&D) To carry out research and development of instruments and suitable methods and environment for observation. Responsibilities as WMO/RIC Tsukuba To assist Members of RA II (Asia) through calibration and comparison with meteorological instruments, and to conduct training for the Members for fostering specialists in the instrument.

10 Traceability of Meteorological Instruments in Japan BIPM International Standard (SI unit) NMIJ National Primary Standard (National Metrology Institute of Japan) JMA National meteorological standard (JMA standard) Working standards (JMA sub-standard) Working instruments (Observation sites) MIC MIC is accredited to ISO/IEC17025 Temperature Pressure Humidity In Japan, the Meteorological Service Act requires all meteorological instruments used for public to meet certain technical and performance standards.

11 Calibration equipment - Standard instruments of JMA - Standard thermometer Platinum resistance thermometer sensor and alternating current bridge Standard hygrometer Dew point meter (electronic cooling type) and platinum resistance thermometer Standard barometer Air piston gauge type Other Standard Wind speed, Radiation, Precipitation, etc. 11

12 Chamber for thermometers Calibration chambers Chamber for hygrometers Chamber for barometers Liquid bath type Range: - 85 ~ +50 Wet and dry air mixing type Range: 15 ~ 95%RH Range: 4 ~ 1050 hpa Air chamber type Wet and dry air mixing type Range: -40 ~ +50 Range: 10 ~ 95%RH,-10 ~

13 Maintenance and Inspection of Instruments in JMA Site maintenance Overhaul at MIC (every 5 years) MIC inspects about 1,600 units of instrument per year

14 Main Services of MIC Quality Assurance of Meteorological Instruments To inspect meteorological equipment and to maintain standard instruments and their traceability, to ensure highprecision meteorological observations in Japan. Research and Development (R&D) To carry out research and development of instruments and suitable methods and environment for observation. Responsibilities as WMO/RIC Tsukuba To assist Members of RA II (Asia) through calibration and comparison with meteorological instruments, and to conduct training for the Members for fostering specialists in the instrument.

15 Investigation and Experimentation on Observation Methods and Instruments In order to make more suitable observation Study of site environment and methods of observation Improvement of meteorological instruments Summary of study and improvement in recent years 2014 Research on environmental conditions with low hedges around observation fields Study of substitutes for Assmann aspiration psychrometer 2015 Research on environmental conditions with low hedges around observation field Technical study of Assmann aspiration psychrometer Study of improvement of the lower part of shelters/screens 2016 Study of substitutes for Assmann aspiration psychrometer Study of weighing precipitation gauges and disdrometers for Dual- polarization radar Wind tunnel and field test of some sonic anemometers Field test of some shelters/screens

16 Intercomparison of Thermometer Screens/Shields in

17 Field Experiment on the Effects of a Nearby Asphalt Road on Temperature Measurement 17

18 Field experiments to determine the effect of boundary fences on temperature observation

19 Main Services of MIC Quality Assurance of Meteorological Instruments To inspect meteorological equipment and to maintain standard instruments and their traceability, to ensure highprecision meteorological observations in Japan. Research and Development (R&D) To carry out research and development of instruments and suitable methods and environment for observation. Responsibilities as WMO/RIC Tsukuba To assist Members of RA II (Asia) through calibration and comparison with meteorological instruments, and to conduct training for the Members for fostering specialists in the instrument.

20 Outline 1. Overview of Organization Main services Quality Assurance of Meteorological Instruments Research and Development Responsibilities as WMO/RIC Tsukuba 2. Introduction of RIC Tsukuba RIC website Collaboration between RICs Services for Members Future plan,etc.

21 WMO Survey of Calibration of Meteorological Instruments in RA II Questionnaire on Meteorological Instruments, Calibration and Training in Regional Association II (Asia) Member : RIC Tsukuba, RIC Beijing, RRC Tokyo, RRC Pune Date:12 December 2011 Survey on Meteorological Instruments, Calibration and Training, Regional Association II (Asia), WMO IOM Report No publications-iom-series.html

22 WMO Survey on meteorological instruments, calibration and training in RA II Pressure Temperature National meteorological standards 16 National meteorological standards 14 Superior standards (traceable to international standard) 9 Superior standards (traceable to international standard) 6 Traveling standards 12 Traveling standards 9 Maintenance of standards and traceability to an international standard (N = 21) Mercury barometers Electronic barometers Pressure balances(dead weight testers) Platinum resistance thermometers Liquid-in-glass thermometers 5 7 Others 2 Others 4 Instrument type/method used for national meteorological standards Meteorological instrument calibration was not conducted properly in many cases; fewer than half of the Members responding to the questionnaire had national meteorological standards that were traceable to international standards. Conventional instruments such as mercury barometers and liquid-in-glass thermometers were still used rather than electrical instruments for most meteorological parameters in operational use. (N = 21)

23 Traceability in meteorological instruments Non radiation International Standard (SI unit) National Primary Standard (National metrology institute) Temperature, Humidity, Pressure, Radiation WMO standard RRC(Regional Radiation Centre) standard National meteorological standard National meteorological standard NMHS Working standards NMHS Working standards Working instruments (Observation sites) Working instruments (Observation sites)

24 Traceability in meteorological instruments Non radiation International Standard (SI unit) Temperature, Humidity, Pressure, National Primary Standard (National metrology institute) National meteorological standard NMHS Working standards Working instruments (Observation sites)

25 Traceability in meteorological instruments Non radiation International Standard (SI unit) National Primary Standard (National metrology institute) Temperature, Humidity, Pressure, National Primary Standard RIC of a foreign country RIC Laboratory Manufacture of instruments NMHS National meteorological standard Working standards Working instruments (Observation sites) Calibration certificates are better to be published by accredited laboratories for ISO/IEC17025 (General requirements for the competence of testing and calibration laboratories).

26 How to get information of RICs? ->RIC Website

27 How to get information of RICs? ->RIC Website

28 RIC Tsukuba s own website - Overview of RIC Tsukuba - Standard instruments - Calibration facilities - ISO/IEC Activities - Reports on instrument experiments - Contact information,etc.

29 JMA/WMO Training Workshop on Calibration and Maintenance of Meteorological Instruments in RA II (ASIA) (19-22 February 2013 Tokyo, Tsukuba, Japan)

30 Collaboration between RICs RIC-Tsukuba and RIC-Beijing conducted reciprocal visits of their experts (2010) Cooperation between RIC-Tsukuba and RIC-Manila (2016)

31 Calibration list at RIC Tsukuba Month/year Country/region Standard instruments calibrated Mar Thailand Barometer, thermometer Oct Republic of Korea Anemometer Aug Philippines Pyranometer Apr Thailand Barometer, thermometer Dec Hong Kong, China Barometer Jun Thailand Barometer, thermometer, anemometer Feb Sultanate of Oman Barometer, thermometer, hygrometer Nov Indonesia Barometer, thermometer, hygrometer Oct Bangladesh Barometer, thermometer, hygrometer Jan Hong Kong, China Anemometer May 2015 Indonesia Pyranometer Jun Fiji Barometer, thermometer,hygrometer Nov Philippines Barometer Jan Mozambique Barometer, thermometer Jan Sri Lanka Barometer Jun Fiji Barometer, thermometer,hygrometer Jan Philippines Anemometer Note: Red characters show the ISO/IEC (General requirements for the competence of testing and calibration laboratories) calibration.

32 Calibration of pyranometer of Indonesia (RIC Tsukuba, July, 2015)

33 Technical Cooperation and Capacity Development to Establish International Traceability Forimprovingthequali tyofmeteorological data BIPM Training for Bangladesh staff (Bangladesh, Nov,. 2013) Training for Mozambique staff (RIC Tsukuba, Feb., 2016) NMHSs Training for 10 Pacific Island Countries staff (Fiji, Nov., 2015) Training for Sri Lanka staff (RIC Tsukuba, Feb., 2016)

34 Flow of RIC Tsukuba Package JMA JICA Survey Preliminary survey of calibration capacity Provision Provision of standard instruments and/or inspection equipment Training Training sessions Follow-up Follow up activities Improvement of technical capacity of NMHS To ensure traceability of meteorological instruments. To improve quality of surface observation.

35 RIC Tsukuba Package for Bangladesh in 2013 RIC Tsukuba Package Improves Quality of Surface Observation Survey Provision Follow-up Training (in Japan and Bangladesh)

36 Training for Pacific Island Countries (Fiji, Oct.- Nov., 2015)

37 Training for Fiji (RIC Tsukuba, July, 2016)

38 Training for Fiji (FMS, Nov.- Dec., 2016)

39 Training for Mozambique (RIC Tsukuba, Dec., 2015)

40 Training for Mozambique (Mozambique, Aug., 2016)

41 Training for Sri Lanka staff (RIC Tsukuba, Feb., 2016)

42 Training for Sri Lanka (Sri Lanka, June, 2017)

43 WMO/CIMO Expert Team Meeting of the CIMO Expert Team on Regional Instrument Centres, Calibration and Traceability (First Session) Sep.2013, Nairobi (Kenya) Meeting of the CIMO Expert Team on Operational Metrology, First Session 1-4 Dec. 2015, Ljubljana (Slovenia)

44 WMO/CIMO Expert Team Second session of the CIMO Expert Team on Operational Metrology (Tokyo, Japan, November 2017)

45 Future plan Interlaboratory comparison among RAII, RA V and RA VI in 2018 RICs Terms of Reference (TOR) / Capabilities: (f) A RIC must participate in, or organize, inter-laboratory comparisons of standard calibration instruments and methods;

46 Summary Traceability and Calibration of instruments are essential for quality assurance of observation data. RICs can assist and advise Members in these areas. Feel free to contact RICs if you have any questions. Thank you for your attention! Mascot of JMA Harerun