SUBMERSIBLE PUMPS FOR SEWAGE
|
|
- Dorothy Bennett
- 6 years ago
- Views:
Transcription
1 FK SUBMERSIBLE PUMPS FOR SEWGE
2
3 FK SUBMERSIBLE PUMPS FOR SEWGE TECNICL DT Impeller Type: Vortex ; Single channel. Solid andling: 6 1 mm. Nominal Power: 1,1 11. Outlet : DN 6 / / 1 / 1. Perfomance Range: from.3 to 2 m 3 /h with 1 meters head. Fluid : wastewater and sewage from buildings and sites in private, commercial, industrial areas. Fluid P: Fluid Temperature Range: from to + C. for higher temperature please contact our sale offices. Max installation Depth: 2mt ( with a proper cable length ). Type of installation: fixed by Coupling Unit, portable in vertical position with pedestal. Continuous working with total submerged applications, or discontinuous S3 with respect of minimum levels. pprovals: EN 12-1 e Ex (TEX, IECEx). PPLICTIONS Design for the pumping of wastewater and sewage from buildings and sites in private, commercial, industrial areas in accordance with European Standard EN vailable in Ex version for use in potentially explosive atmosphere (TEX certifications: II2G Ex db k IIB T or IECEx: Ex db IIB T Gb) PUMP CONSTRUCTION Vortex impeller with maximum solids handling with new no-clogging shape, Single channel impeller with high efficency and compliance with European Stadard EN Single-unit cartridge seal with double mechanical seals, SiC-SiC at the pump side, SiC-C at the motor side. ll seals are independent of rotation direction. DN 6, DN, DN 1, DN1 radial slot EN flange discharge. Liquid Viscosity : 1mm2/s MOTOR CONSTRUCTION Premium Efficiency IE3, three-phase, squirrel-cage motor. Continuously S1 rated motor in submerged applications, or discontinuous S3 according to minimum levels. Seal monitoring by a moisture sensor in the seal chamber, which signals an inspection alert if there is leakage at the mechanical seals ( Optional ). Bi-metallic switch in stator windings, with max temperature ( 13 C ). Start-up: = direct on line (DOL); = stardelta (Y/ ). Lubricated-for-life bearings with a calculated lifetime of minimum, hrs. Stainless steel shaft. Designed with high resistance fatigue fracture. Degree of protection : IP 6. Insulation class : F. Max starting /hours : 2. MTERILS N PRTS MTERILS 1 1 andle Stainless Steel ( ISI 3 ) 2 Electric cable 7RN-F 3 3 Screws STINLESS STEEL ( ISI 3 ) OR NBR 2 Mechanical seal pump side Mechanical seal motor side SiC/SiC SiC/Carbon Ring Seal* NBR 6 Motor Shaft Stainless Steel ( ISI 2 ) 7 Pump body / motor Cast Iron ( EN GJL 2 ) Impeller Cast Iron ( EN GJL 2) 9 Wear ring Cast Iron ( EN GJL 1) 1 Coating crylic Two-component µm * only from 3 poles and from 2 poles DB PUMPS reserves the right to make modifications without notice 3
4 - DENOMINTION INDEX (example) FK C T 23D Ex S DIGITS FK C V Technical pump range name Single channel impeller Vortex impeller Outlet diameter pproximate nominal power x1 (a, b, c, d in case of different curve at same power) Number of poles T EX S 2,3, Three-phase Tension frequency = hz - 6 = 6hz D.O.L. D.O.L. D.O.L. D.O.L. Y/D Y/D Y/D Y/D Tension rate & Start method No explosion proof Explosion proof (TEX) No sensor version (moisture sensor) Sensor version (moisture sensor) NOT for Ex version Cable lenght 1m Specific cable lenght STNDRD ND OPTIONS STNDRD OPTIONS MINS VOLTGE 3 x V~ 3 x 23 V~ VOLTGE TOLERNCE + 6 % / -1 %, z - TEMPERTURE MONITORING BY BI-METLLIC SWITC IN TE STTOR WINDINGS 1 C - MECNICL SEL (T PUMP SIDE) SiC/SiC - MECNICL SEL (T MOTOR SIDE) SiC/Carbon - MOISTURE SENSOR - YES CBLE LENGT (M) PPROVLS EN 12-1 Ex (TEX, IECEx ) O-RING NBR FKM (Viton ) INSTLLTION Wet well - DB PUMPS reserves the right to make modifications without notice
5 PERFORMNCE RNGE The performance curves are based on kinematic viscosity values = 1 mm 2 /s and density equal to 1 kg/m 3. Curve tolerance according to ISO 996. GRPIC SELECTION TBLE FK RNGE SUBMERSIBLE PUMPS FOR SEWGE kpa m FKV Q US gpm Q IMP gpm ft FKV FKC FKV 6 FKC 6 FKV 1 FKC FKC 1 FKC Q m 3 /h Q l/s Q l/min SELECTION TBLE FKV 6 Q=m 3 /h 7,2 1, 21,6 2, 36 3,2, 7,6 6, 72 79,2 6, 93,6 1, 1 Q=l/min FKV T D 9,1,7 7,9 6,7,3, 2,7 1, FKV T D 16, 1,3 11, 9,1 6,6,3 2,7 FKV T D (m) 21,1 19, 17,1 1,2 11,1,1, 3, 2,3 FKV 6.2 T D 27,2 26, 2, 21,3 1,3 1,1 11,, 6,2,2 3, SELECTION TBLE FKV Q=m 3 /h 7,2 1, 21,6 2, 36 3,2, 7,6 6, 72 79,2 6, 93,6 1, 1 Q=l/min FKV 11. T D 7, 6,7 6,1,3, 3,6 2,7 1,9 1,3 FKV 1. T D 9, 9,3,9,1 7,2 6,1, 3,9 3, 2,3 1,9 FKV 22. T D 11, 11,6 11,3 1, 1, 9,1, 6,9,,7 3,7 2, FKV. T D 17, 17,1 16, 1,7 1,9 1, 13,1 12,1 11,1 1, 9,,1 7,1 FKV.2 T D (m) 22,1 21,1 19, 17,3 1,9 12,2 9,7 7,3,2 3,7 2,9 FKV 6.2 T Y/D 29,1 2, 27, 2,1 22, 2,3 17,6 1, 12,2 9, 7,3, FKV 7.2 T Y/D 32,1 31, 3, 29,1 27, 2, 21, 1,9 16, 13,2 1,6, 6,6, FKV 92.2 T Y/D 36,2 3,9 3,1 33,7 31,7 29,2 26, 23, 2,3 17,3 1,3 11,7 9, 7,7 6,6 FKV 11.2 T Y/D 1,2 1,, 39,2 37, 3,2 32,6 29,7 26,6 23, 2,3 17,3 1,6 12,1 1,, DB PUMPS reserves the right to make modifications without notice
6 SELECTION TBLE FKV 1 SELECTION TBLE FKC 6 FK RNGE SUBMERSIBLE PUMPS FOR SEWGE Q=m 3 /h, 1, 2, 3,2 7,6 72, 6, 1, 11,2 129,6 1, Q=l/min, FKV 1 3. T D 11, 1,9 9,7,2 6,,9 3, 2,3 FKV 1. T D 1, 13,2 12, 1,6 9, 7,,,3 3,1 FKV 1. T Y/D (m) 1,9 1,6 1,9 13, 12,6 11,1 9,6, 6,, FKV 1 7. T Y/D 19, 1, 1,3 17, 16, 1,2 13,9 12, 1, 9,2 7,7 Q=m 3 /h 7,2 1, 21,6 2, 36 3,2, 7,6 6, 72 79,2 6, 93,6 1, 1 Q=l/min FKC T D 2, 17, 17, 1,9 1,3 12, 11,6 1, 9,3,3 7,2 6,1,9 3,6 FKC T D (m) 26, 23, 23, 2,9 1,6 16,7 1,1 13,7 12, 11,2 1,1 9, 7, 6,,1 3, SELECTION TBLE FKC Q=m 3 /h Q=l/min FKC 1. T D,9 7,9 6,9 6,1,3, 3,6 2, 1,9 FKC 22. T D 13,9 12, 1, 9,2, 7, 6,, 3,9 2,6 FKC 3. T D 13,9 12, 11,1 1, 9,,1 7,2 6,,, 3,3 FKC. T D (m) 17, 1,7 1,3 13, 11,9 1,9 1, 9,2,3 7, 6,,3 FKC. T Y/D 2, 19,1 17,6 16,2 1,9 13,7 12,7 11,6 1,6 9,7,7 7,6 6,6, FKC 7. T Y/D 2,6 22, 21,2 19,7 1,3 17,1 1, 1,7 13,6 12,6 11,6 1,6 9,6,7 7,7 SELECTION TBLE FKC 1 Q=m 3 /h Q=l/min FKC 1 1. T D,9 7,3 6,,7 3, 2,2 FKC T D 1,1 11, 9, 7, 6,3, 3,1 FKC 1 3. T D 9, 9,2, 7, 6,9 6,,1,2 3,3 2, FKC 1. T D (m) 13,1 11, 1,7 9,, 7, 6,,, 3,3 FKC 1. T Y/D 17, 1,7 1,1 12,7 11, 1,3 9,3,2 7,1 6,,9 3, 2,1 FKC 1 7. T Y/D 22, 2,7 19, 17, 16, 1,6 13,2 11,9 1,6 9,3,1 6,,,1 SELECTION TBLE FKC 1 Q=m 3 /h Q=l/min FKC 1 3. T D 9,7 9,1, 7, 7,1 6,3,,7 3, 3, 2,1 FKC 1. T D 12, 11, 1,6 9,7, 7,9 7, 6,1,2,2 3,2 2,2 FKC 1. T Y/D (m) 16, 1, 13,7 12, 11, 1,3 9,2,2 7,1 6,1,1,2 3,2 2,3 FKC 1 7. T Y/D 2,9 19,2 17,7 16,3 1, 13, 12,6 11,6 1, 9,,6 7,6 6,6,, DB PUMPS reserves the right to make modifications without notice 6
7 FKV 6-2/ POLES - SUBMERSIBLE PUMPS FOR SEWGE Fluid temperature range: from to + C. For higher temperature please contact our sale offices. P kpa m Q US gpm Q IMP gpm ft DN Min submersibility under S1 Min submersibility under S3 D Q m 3 /h P 6 C B DN1 M Q m 3 /h % idr Q m 3 /h Q l/s DN2 n xm16 16 Delivery Flange PN16 1 Q l/min The performance curves are based on kinematic viscosity values = 1 mm 2 /s and density equal to 1 kg/m 3. Curve tolerance according to ISO 996. RTED VOLTGE z P1 ELECTRICL DT NOMINL In Is η % S3 * % MOTOR P EMERGED MOTOR RTED SPEED rpm/min STRTING FKV T D 3 x V~ 1,3 1,1 1, 3,3 9,9,% 1% S1 1 DOL 1mt G1.+3x1 FKV T D 3 x V~ 2, 2,2 3,, 19,1 7,% 1% S1 29 DOL 1mt G1.+3x1 FKV T D 3 x V~ 3,3 3,,,7 19,1 7,7% 1% S1 29 DOL 1mt G1.+3x1 FKV 6.2 T D 3 x V~,6,, 7, 27, 9,1% 1% S1 29 DOL 1mt G1.+3x1 Models available in explosion proof version. TEX: II2G Ex db k IIB T or IECEx: Ex db IIB T Gb. Only with pump completely submerged. * %S3 indicates the percentage of duty in a cycle from 1 up to 6 minutes; 1% S1 means continuous duty. CBLE SOLIDS NDLING B C D S1 S3 DN2 FLNGE DIMENSION EN PN16 PCKGING DIMENSION DN1 M N OLES L/ L/B WEIGT Kg FKV T D FKV T D FKV T D FKV 6.2 T D DB PUMPS reserves the right to make modifications without notice 7
8 FKV - POLES - SUBMERSIBLE PUMPS FOR SEWGE Fluid temperature range: from to + C. For higher temperature please contact our sale offices. P kpa m Q US gpm Q IMP gpm ft DN Min submersibility under S1 Min submersibility under S3 D Q m 3 /h P 6 C B M DN Q m 3 /h % idr Q m 3 /h 1 2 Q l/s DN2 n xm16 16 Delivery Flange PN Q l/min The performance curves are based on kinematic viscosity values = 1 mm 2 /s and density equal to 1 kg/m 3. Curve tolerance according to ISO 996. RTED VOLTGE z P1 ELECTRICL DT NOMINL In Is η % S3 * % MOTOR P EMERGED MOTOR RTED SPEED rpm/min STRTING FKV 11. T D 3 x V~ 1,3 1,1 1, 3, 11,,2% 1% S1 1 DOL 1mt G1.+3x1 FKV 1. T D 3 x V~ 1, 1, 2, 3, 11, 7,2% 1% S1 1 DOL 1mt G1.+3x1 FKV 22. T D 3 x V~ 2, 2,2 3,,7 11, 7,% 1% S1 1 DOL 1mt G1.+3x1 FKV. T D 3 x V~,,,,6 2,,% 1% S1 1 DOL 1mt G1.+3x1 Models available in explosion proof version. TEX: II2G Ex db k IIB T or IECEx: Ex db IIB T Gb. Only with pump completely submerged. * %S3 indicates the percentage of duty in a cycle from 1 up to 6 minutes; 1% S1 means continuous duty. CBLE SOLIDS NDLING B C D S1 S3 DN2 FLNGE DIMENSION EN PN16 PCKGING DIMENSION DN1 M N OLES L/ L/B WEIGT Kg FKV 11. T D FKV 1. T D FKV 22. T D FKV. T D DB PUMPS reserves the right to make modifications without notice
9 FKV - 2 POLES - SUBMERSIBLE PUMPS FOR SEWGE Fluid temperature range: from to + C. For higher temperature please contact our sale offices. P kpa m Q US gpm Q IMP gpm 11.2 ft DN Min submersibility under S1 Min submersibility under S3 C B D Q m 3 /h P 12 n xm16 E DN2 M DN1 1 % idr Q m 3 /h Q m 3 /h Q l/s Delivery Flange PN Q l/min The performance curves are based on kinematic viscosity values = 1 mm 2 /s and density equal to 1 kg/m 3. Curve tolerance according to ISO 996. RTED VOLTGE z P1 ELECTRICL DT NOMINL In Is η % S3 * % MOTOR P EMERGED MOTOR RTED SPEED rpm/min STRTING FKV.2 T D 3 x V~,6,, 7,7 27,,2% 1% S1 29 DOL 1mt G1.+3x1 FKV 6.2 T Y/D 3 x V~ 6,9 6,,2 11,7 3,,% % 29 Y/ 1mt 7G2,+3x1 FKV 7.2 T Y/D 3 x V~,3 7, 1,2 13,7 1,2 9,7% % 29 Y/ 1mt 7G2,+3x1 FKV 92.2 T Y/D 3 x V~ 1,2 9,2 12, 1, 119, 9,% % 29 Y/ 1mt 7G2,+3x1 FKV 11.2 T Y/D 3 x V~ 12,1 11, 1, 21, 121, 91,2% % 29 Y/ 1mt 7G2,+3x1 Models available in explosion proof version. TEX: II2G Ex db k IIB T or IECEx: Ex db IIB T Gb. Only with pump completely submerged. * %S3 indicates the percentage of duty in a cycle from 1 up to 6 minutes; 1% S1 means continuous duty. CBLE SOLIDS NDLING B C D S1 S3 DN2 FLNGE DIMENSION EN PN16 PCKGING DIMENSION DN1 M N OLES L/ L/B WEIGT Kg FKV.2 T D FKV 6.2 T Y/D FKV 7.2 T Y/D FKV 92.2 T Y/D FKV 11.2 T Y/D DB PUMPS reserves the right to make modifications without notice 9
10 FKV 1 - POLES - SUBMERSIBLE PUMPS FOR SEWGE Fluid temperature range: from to + C. For higher temperature please contact our sale offices. P kpa m Q US gpm Q IMP gpm ft DN Min submersibility under S1 Min submersibility under S3 n xm16 E DN2 C B DN1 M D x % idr Q m 3 /h Q m 3 /h Q m 3 /h Q l/s P Q l/min Delivery Flange PN16 The performance curves are based on kinematic viscosity values = 1 mm 2 /s and density equal to 1 kg/m 3. Curve tolerance according to ISO 996. RTED VOLTGE z P1 ELECTRICL DT NOMINL In Is η % S3 * % MOTOR P EMERGED MOTOR RTED SPEED rpm/min STRTING FKV 1 3. T D 3 x V~ 3, 3,,, 2,7 7,% 1% S1 1 DOL 1mt G1.+3x1 FKV 1. T D 3 x V~,,,,9 2,,% 1% S1 1 DOL 1mt G1.+3x1 FKV 1. T Y/D 3 x V~ 6,2, 7, 11,3,3 9,% % 1 Y/ 1mt 7G2,+3x1 FKV 1 7. T Y/D 3 x V~,3 7, 1, 1,3, 9,6% 6% 1 Y/ 1mt 7G2,+3x1 Models available in explosion proof version. TEX: II2G Ex db k IIB T or IECEx: Ex db IIB T Gb. Only with pump completely submerged. * %S3 indicates the percentage of duty in a cycle from 1 up to 6 minutes; 1% S1 means continuous duty. CBLE SOLIDS NDLING B C D S1 S3 DN2 FLNGE DIMENSION EN PN16 PCKGING DIMENSION DN1 M N OLES L/ L/B WEIGT Kg FKV 1 3. T D FKV 1. T D FKV 1. T Y/D FKV 1 7. T Y/D DB PUMPS reserves the right to make modifications without notice 1
11 FKC 6-2 POLES - SUBMERSIBLE PUMPS FOR SEWGE Fluid temperature range: from to + C. For higher temperature please contact our sale offices. P kpa m Q US gpm Q IMP gpm ft DN Min. submersibility sommergibilità under in regime S1 S1 Min. sommergibilità submersibility under in regime S3 S3 1% C B D Q m 3 /h P n xm E DN2 DN1 M x 1 % idr Q m 3 /h Q m 3 /h Q l/s Q l/min Flangia Delivery di Flange mandata PN16 PN16 The performance curves are based on kinematic viscosity values = 1 mm 2 /s and density equal to 1 kg/m 3. Curve tolerance according to ISO 996. RTED VOLTGE z P1 ELECTRICL DT NOMINL In Is η % S3 * % MOTOR P EMERGED MOTOR RTED SPEED rpm/min STRTING FKC T D 3 x V~ 2,6 2,2 3,, 19,1 7,3% 1% S1 29 DOL 1mt G1.+3x1 FKC T D 3 x V~ 3, 3,,, 19,1 7,% 1% S1 29 DOL 1mt G1.+3x1 Models available in explosion proof version. TEX: II2G Ex db k IIB T or IECEx: Ex db IIB T Gb. Only with pump completely submerged. * %S3 indicates the percentage of duty in a cycle from 1 up to 6 minutes; 1% S1 means continuous duty. CBLE SOLIDS NDLING B C D S1 S3 DN2 FLNGE DIMENSION EN PN16 PCKGING DIMENSION DN1 M N OLES L/ L/B WEIGT Kg FKC T D FKC T D DB PUMPS reserves the right to make modifications without notice 11
12 FKC - POLES - SUBMERSIBLE PUMPS FOR SEWGE Fluid temperature range: from to + C. For higher temperature please contact our sale offices. P kpa m Q US gpm Q IMP gpm 7. ft 2 2. DN 1 1. Min. submersibility sommergibilità under in regime S1 S1 Min. submersibility sommergibilità under in regime S3 S3 1% n xm E DN2 C B DN1 M x 1 D Q m 3 /h P Q m 3 /h % idr Q m 3 /h Q l/s Q l/min Flangia Delivery di mandata Flange PN16 PN16 The performance curves are based on kinematic viscosity values = 1 mm 2 /s and density equal to 1 kg/m 3. Curve tolerance according to ISO 996. RTED VOLTGE z P1 ELECTRICL DT NOMINL In Is η % S3 * % MOTOR P EMERGED MOTOR RTED SPEED rpm/min STRTING FKC 1. T D 3 x V~ 1, 1, 2, 3, 11, 7,2% 1% S1 1 DOL 1mt G1.+3x1 FKC 22. T D 3 x V~ 2,6 2,2 3,,7 11, 7,3% 1% S1 1 DOL 1mt G1.+3x1 FKC 3. T D 3 x V~ 3,6 3,, 7,6 2,7 7,9% 1% S1 1 DOL 1mt G1.+3x1 FKC. T D 3 x V~,7,,,9 2,,6% 1% S1 1 DOL 1mt G1.+3x1 FKC. T Y/D 3 x V~ 6,3, 7,,6,3 9,% % 1 Y/ 1mt 7G2,+3x1 FKC 7. T Y/D 3 x V~,1 7, 1, 1,1, 9,7% 6% 1 Y/ 1mt 7G2,+3x1 Models available in explosion proof version. TEX: II2G Ex db k IIB T or IECEx: Ex db IIB T Gb. Only with pump completely submerged. * %S3 indicates the percentage of duty in a cycle from 1 up to 6 minutes; 1% S1 means continuous duty. CBLE SOLIDS NDLING B C D S1 S3 DN2 FLNGE DIMENSION EN PN16 PCKGING DIMENSION DN1 M N OLES L/ L/B WEIGT Kg FKC 1. T D FKC 22. T D FKC 3. T D FKC. T D FKC. T Y/D FKC 7. T Y/D DB PUMPS reserves the right to make modifications without notice 12
13 FKC 1 - POLES - SUBMERSIBLE PUMPS FOR SEWGE Fluid temperature range: from to + C. For higher temperature please contact our sale offices. P kpa m Q US gpm Q IMP gpm ft 2 2 DN Min. submersibility sommergibilità under in regime S1 S1 Min. submersibility sommergibilità under in regime S3 S3 1% D Q m 3 /h P 12 n xm E DN2 C B DN1 M x Q m 3 /h % idr Q m 3 /h Q l/s Q l/min Flangia Delivery di Flange mandata PN16 PN16 The performance curves are based on kinematic viscosity values = 1 mm 2 /s and density equal to 1 kg/m 3. Curve tolerance according to ISO 996. RTED VOLTGE z P1 ELECTRICL DT NOMINL In Is η % S3 * % MOTOR P EMERGED MOTOR RTED SPEED rpm/min STRTING FKC 1 1. T D 3 x V~ 1, 1, 2, 3,9 11, 7,2% 1% S1 1 DOL 1mt G1.+3x1 FKC T D 3 x V~ 2,6 2,2 3,,7 11, 7,3% 1% S1 1 DOL 1mt G1.+3x1 FKC 1 3. T D 3 x V~ 3,7 3,, 7,7 2,7,% 1% S1 1 DOL 1mt G1.+3x1 FKC 1. T D 3 x V~,,,,6 2, 9,6% 1% S1 1 DOL 1mt G1.+3x1 FKC 1. T Y/D 3 x V~ 6,1, 7, 11,,3 9,9% % 1 Y/ 1mt 7G2,+3x1 FKC 1 7. T Y/D 3 x V~, 7, 1, 1,6, 9,% 6% 1 Y/ 1mt 7G2,+3x1 Models available in explosion proof version. TEX: II2G Ex db k IIB T or IECEx: Ex db IIB T Gb. Only with pump completely submerged. * %S3 indicates the percentage of duty in a cycle from 1 up to 6 minutes; 1% S1 means continuous duty. CBLE SOLIDS NDLING B C D S1 S3 DN2 FLNGE DIMENSION EN PN16 PCKGING DIMENSION DN1 M N OLES L/ L/B WEIGT Kg FKC 1 1. T D FKC T D FKC 1 3. T D FKC 1. T D FKC 1. T Y/D FKC 1 7. T Y/D DB PUMPS reserves the right to make modifications without notice 13
14 FKC 1 - POLES - SUBMERSIBLE PUMPS FOR SEWGE Fluid temperature range: from to + C. For higher temperature please contact our sale offices. P kpa m Q US gpm Q IMP gpm ft 2 2 DN Min. submersibility sommergibilità under in regime S1 S1 Min. submersibility sommergibilità under in regime S3 S3 1% D Q m 3 /h P n xm E DN2 C B DN1 M x 1 2 % idr Q m 3 /h Q m 3 /h Q l/s Q l/min Flangia Delivery di mandata Flange PN16 PN16 The performance curves are based on kinematic viscosity values = 1 mm 2 /s and density equal to 1 kg/m 3. Curve tolerance according to ISO 996. RTED VOLTGE z P1 ELECTRICL DT NOMINL In Is η % S3 * % MOTOR P EMERGED MOTOR RTED SPEED rpm/min STRTING FKC 1 3. T D 3 x V~ 3,7 3,, 7, 2,,% 1% S1 1 DOL 1mt G1.+3x1 FKC 1. T D 3 x V~,,,,7 2,,% 1% S1 1 DOL 1mt G1.+3x1 FKC 1. T Y/D 3 x V~ 6,, 7, 11,3,3 9,% % 1 Y/ 1mt 7G2,+3x1 FKC 1 7. T Y/D 3 x V~, 7, 1, 1,7, 9,6% 6% 1 Y/ 1mt 7G2,+3x1 Models available in explosion proof version. TEX: II2G Ex db k IIB T or IECEx: Ex db IIB T Gb. Only with pump completely submerged. * %S3 indicates the percentage of duty in a cycle from 1 up to 6 minutes; 1% S1 means continuous duty. CBLE SOLIDS NDLING B C D S1 S3 DN2 FLNGE DIMENSION EN PN16 PCKGING DIMENSION DN1 M N OLES L/ L/B WEIGT Kg FKC 1 3. T D FKC 1. T D FKC 1. T Y/D FKC 1 7. T Y/D DB PUMPS reserves the right to make modifications without notice 1
15 FK - RINGSTND The Ringstand is useful for portable installation when a rapid pump positioning in the tank is needed, ensuring high stability thanks to a large contact surface. FKV 6 FKV FKC 1 PCKGING DIMENSION WEIGT DESCRIPTION GENERL FETURES FKC 6 FKC FKV 1 fino 2.2 L/ L/B Kg RINGSTND Ø32 FK - EN GJL2 x 1, RINGSTND Ø33 FK - Screws Stainless Steel 2 x , RINGSTND Ø3 FK - Two Component Coating x x x 11, R1 R2 R3 R R S1 S3 FLNGE DIMENSION EN PN16 DN1 M N OLES FKV T D FKV T D FKV T D FKV 6.2 T D FKV 11. T D FKV 1. T D FKV 22. T D FKV. T D FKV.2 T D FKV 6.2 T Y/D FKV 7.2 T Y/D FKV 92.2 T Y/D FKV 11.2 T Y/D FKV 1 3. T D FKV 1. T D FKV 1. T Y/D FKV 1 7. T Y/D FKC T D FKC T D FKC 1. T D FKC 22. T D FKC 3. T D FKC. T D FKC. T Y/D FKC 7. T Y/D FKC 1 1. T D FKC T D FKC 1 3. T D FKC 1. T D FKC 1. T Y/D FKC 1 7. T Y/D FKC 1. T D FKC 1. T D FKC 1. T Y/D FKC 1 7. T Y/D DN 6 DN / DN 1 R3 Min. Min sommergibilità submersibility in regime under S3 S3 1% Min. Min sommergibilità submersibility in under regime S1 S1 R1 R2 R DN1 M Flangia Delivery di Flange mandata PN16 PN16 1 M DN1 1 Delivery Flangia di Flange mandata PN16 PN16 R DB PUMPS reserves the right to make modifications without notice 1
16 FK - COUPING UNIT WIT VERTICL OUTLET D-V (DN6 DN1) The coupling unit devices for fixed installation facilitate the ascent and descent of the pump in the tank. They come complete with all necessary components for installation with the exception of guide rails. DESCRIPTION GENERL FETURES FKV - FKC 6 FKV - FKC FKV - FKC 1 FKC 1 PCKGING DIMENSION L/ L/B WEIGT Kg D-V6 COUPLING UNIT DN6 x 2 D-V COUPLING UNIT DN - EN GJL2 - Screws Stainless Steel 2 x 31, D-V1 COUPLING UNIT DN1 - Two Component Coating - NBR Rubber Seal x 6 D-V1 COUPLING UNIT DN1 x 96 DN P1 P3 P P P6 P7 P P9 P1 P11 P12 P13 P1 P1 P16 P17 P1 P19 1 S1 S3 FKV T D 6 1 xø " 1/ FKV T D 6 1 xø " 1/ FKV T D 6 1 xø " 1/ FKV 6.2 T D 6 1 xø " 1/ FKV 11. T D 1+16 xø19+xø " 1/ FKV 1. T D 1+16 xø19+xø " 1/ FKV 22. T D 1+16 xø19+xø " 1/ FKV. T D 1+16 xø19+xø " 1/ FKV.2 T D 1+16 xø19+xø " 1/ FKV 6.2 T Y/D 1+16 xø19+xø " 1/ FKV 7.2 T Y/D 1+16 xø19+xø " 1/ FKV 92.2 T Y/D 1+16 xø19+xø " 1/ FKV 11.2 T Y/D 1+16 xø19+xø " 1/ FKV 1 3. T D 1 1 xø " FKV 1. T D 1 1 xø " FKV 1. T Y/D 1 1 xø " FKV 1 7. T Y/D 1 1 xø " DB PUMPS reserves the right to make modifications without notice 16
17 DN P1 P3 P P P6 P7 P P9 P1 P11 P12 P13 P1 P1 P16 P17 P1 P19 1 S1 S3 FKC T D 6 1 xø " 1/ FKC T D 6 1 xø " 1/ FKC 1. T D 1+16 xø19+xø " 1/ FKC 22. T D 1+16 xø19+xø " 1/ FKC 3. T D 1+16 xø19+xø " 1/ FKC. T D 1+16 xø19+xø " 1/ FKC. T Y/D 1+16 xø19+xø " 1/ FKC 7. T Y/D 1+16 xø19+xø " 1/ FKC 1 1. T D xø FKC T D xø FKC 1 3. T D 1 1 xø " FKC 1. T D 1 1 xø " FKC 1. T Y/D 1 1 xø " FKC 1 7. T Y/D 1 1 xø " FKC 1 3. T D 1 2 xø " FKC 1. T D 1 2 xø " FKC 1. T Y/D 1 2 xø " FKC 1 7. T Y/D 1 2 xø " P7 P P P9 P1 P P19 P16 1 P3 P13 P1 P1 DN Vite Screw M16 M16 P17 P P9 P Tubi guida P3 P13 P1 DN DN 6 P1 P1 P12 Min. submersibility sommergibilità in regime under S3 S3 1% Min. Min sommergibilità submersibility in regime under S1 P11 P3 P13 P1 P DN P Vite Screw M16 M16 P9 P1 DN 1 DN 1 P6 P1 DN Vite Screw M16 M16 DB PUMPS reserves the right to make modifications without notice 17
18 FK - COUPING UNIT WIT ORIZONTL OUTLET D-O (DN6) The coupling unit devices for fixed installation facilitate the ascent and descent of the pump in the tank. They come complete with all necessary components for installation with the exception of guide rails. DESCRIPTION GENERL FETURES FKV - FKC 6 FKV - FKC FKV - FKC 1 FKC 1 PCKGING DIMENSION L/ L/B WEIGT Kg - EN GJL2 D-O6 COUPLING UNIT DN6 - Screws Stainless Steel 2 - Two Component Coating x , DN P3 P P P6 P7 P P9 P1 P11 P12 P1 S1 S3 FKV T D Rp 2" 1/ FKV T D Rp 2" 1/ FKV T D Rp 2" 1/ FKV 6.2 T D Rp 2" 1/ FKC T D Rp 2" 1/ FKC T D Rp 2" 1/ P7 6 P 3 31 DN6-O 1. 3/" P P P9 P1 DN 3 Tubi guida P12 Min. submersibility sommergibilità in regime under S3 S3 1% Min. submersibility sommergibilità under in regime S1 S1 P11 P3 Screw Vite M1 P1 DN 6 P6 DB PUMPS reserves the right to make modifications without notice 1
19 FK - CONTROL PNEL/PUMP SELECTION MTRIX PUMP P1 MX KW P In CONTROL PNEL ED 1 PUMP CONTROL PNEL ED 2 PUMPS CONTROL PNEL ED 3 PUMPS ELECTRONIC CONTROL PNEL 2 PUMPS CONTROL PNEL CONTROL PNEL CONTROL PNEL CONTROL PNEL CONTROL PNEL CONTROL PNEL CODE CODE CODE e.box PLUS e.box PLUS D FKV T D 1,3 1,1 1, 3, ED1,T 132 E2D3T 133 E3D,T FKV T D 2, 2,2 3,, 1323 ED2,T 1326 E2DT 6112 E3D7,T FKV T D 3,3 3,,, ED2,T 1326 E2DT 6112 E3D7,T FKV 6.2 T D,6,, 7, 617 EDT E2DT E3D12T FKV 11. T D 1,3 1,1 1, 3, 1323 ED1,T 132 E2D3T 133 E3D,T FKV 1. T D 1, 1, 2, 3, 1323 ED1,T 132 E2D3T 133 E3D,T FKV 22. T D 2, 2,2 3,, ED2,T 1326 E2DT 6112 E3D7,T FKV. T D,,,,6 617 EDT E2DT E3D12T FKV.2 T D,6,, 7,7 617 EDT E2DT E3D12T FKV 6.2 T Y/D 6,9 6,,2 11,7 132 ED7,T SD 6177 E2D1T SD 6171 E3D22,T SD FKV 7.2 T Y/D,3 7, 1,2 13,7 132 ED7,T SD 6177 E2D1T SD 6171 E3D22,T SD FKV 92.2 T Y/D 1,2 9,2 12, 1, 6177 ED1T SD 6176 E2D3T SD E3DT SD FKV 11.2 T Y/D 12,1 11, 1, 21, 6177 ED1T SD 6176 E2D3T SD E3DT SD FKV 1 3. T D 3, 3,,, 617 EDT E2DT E3D12T FKV 1. T D,,,,9 617 EDT E2DT E3D12T FKV 1. T Y/D 6,2, 7, 11,3 132 ED7,T SD 6177 E2D1T SD 6171 E3D22,T SD FKV 1 7. T Y/D,3 7, 1, 1,3 132 ED7,T SD 6177 E2D1T SD 6171 E3D22,T SD FKC T D 2, 2,2 3,, 1323 ED2,T 1326 E2DT 6112 E3D7,T x x FKC T D 3,3 3,,, ED2,T 1326 E2DT 6112 E3D7,T x x FKC 1. T D 1, 1, 2, 3, 1323 ED1,T 132 E2D3T 133 E3D,T x x FKC 22. T D 2, 2,2 3,, ED2,T 1326 E2DT 6112 E3D7,T x x FKC 3. T D 3, 3,,, 617 EDT E2DT E3D12T x x FKC. T D,,,,9 617 EDT E2DT E3D12T x x FKC. T Y/D 6,2, 7, 11,3 132 ED7,T SD 6177 E2D1T SD 6171 E3D22,T SD FKC 7. T Y/D,3 7, 1, 1,3 132 ED7,T SD 6177 E2D1T SD 6171 E3D22,T SD FKC 1 1. T D 1, 1, 2, 3, 1323 ED1,T 132 E2D3T 133 E3D,T x x FKC T D 2, 2,2 3,, ED2,T 1326 E2DT 6112 E3D7,T x x FKC 1 3. T D 3, 3,,, 617 EDT E2DT E3D12T x x FKC 1. T D,,,,9 617 EDT E2DT E3D12T x x FKC 1. T Y/D 6,2, 7, 11,3 132 ED7,T SD 6177 E2D1T SD 6171 E3D22,T SD FKC 1 7. T Y/D,3 7, 1, 1,3 132 ED7,T SD 6177 E2D1T SD 6171 E3D22,T SD FKC 1. T D,,,,9 617 EDT E2DT E3D12T x x FKC 1. T Y/D 6,2, 7, 11,3 132 ED7,T SD 6177 E2D1T SD 6171 E3D22,T SD FKC 1 7. T Y/D,3 7, 1, 1,3 132 ED7,T SD 6177 E2D1T SD 6171 E3D22,T SD DB PUMPS reserves the right to make modifications without notice 19
20 DB PUMPS reserves the right to make modifications without notice 2 NOTES
21 CCESSORIES 21
22 CCESSORIES SUBMERSIBLE PUMPS DESCRIPTION GENERL FETURES FKV FKC 6 FKV FKC FKC FKV 1 FKC 1 PCKGING DIMENSION WEIGT Kg 1" L/B 13 KIT CIN W/SCKLE 3MT 316 MX 1KG - 2 schakles EN 139:29: ISI Chain 3mt: ISI MX Load: 1 Kg B 2, C D 6 L ø 2 KIT CIN W/SCKLE 3MT 316 MX 7KG -2 schakles EN 139:29: ISI Chain 3mt: ISI MX Load: 7 Kg B 3 C 1, D 12 L ø FLYGT COUPLING DPTER DN ,2 FLYGT COUPLING DPTER DN - EN GJL ,2 - Screws M16x7 : INOX 2 FLYGT COUPLING DPTER DN1 - Two Component Coating ,6 FLYGT COUPLING DPTER DN ,6 COUPLING SYSTEM DPTOR FK6 - FEK COUPLING SYSTEM DPTOR FK - FEK 3, COUPLING SYSTEM DPTOR FK1 - FEK COUPLING SYSTEM DPTOR FK 6 - FEK 3 COUPLING SYSTEM DPTOR FK - FEK COUPLING SYSTEM DPTOR FK 1- FEK 6 - EN GJL2 - Screws M16x : INOX 2 - Water Painting, ,, 13,3 DN PN Threaded KIT FLNGE DN 6 PN " 1/2, Galvanized Steel KIT FLNGE DN PN ",9 - Screws M16x7 KIT FLNGE DN1 PN " ,7 DB PUMPS reserves the right to make modifications without notice 22
23
24 Via Marco Polo, 1-33 Mestrino (PD) Italy - Tel Fax On-line selection tool DB PUMPS LTD. Unit and, Stortford all Industrial Park, Dunmow Road, Bishops Stortford, erts CM23 GZ - UK salesuk@dwtgroup.com Tel Fax DB PUMPS B.V. Brusselstraat 1 B-172 Groot-Bijgaarden - Belgium info.belgium@dwtgroup.com Tel Fax DB PUMPS B.V. lbert Einsteinweg, 11 DL Drunen - Nederland info.netherlands@dwtgroup.com Tel Fax DB PUMPS IBERIC S.L. venida de Castilla nr.1 Local San Fernando De enares - Madrid Spain info.spain@dwtgroup.com Tel Fax: DB PRODUCTION UNGRY KFT. - Nagykanizsa, Buda Ernó u. ungary Tel DB PUMPS POLND Sp. z o.o. Mokotow Marynarska ul. Postępu 1C Warszawa - Poland Tel DB UKRINE Representative Office Regus orizon Park M. rinchenka St, suit Kiev - Ukraine Tel DB PUMPS INC Benchmark Drive Ladson, SC US info.usa@dwtgroup.com Tel Toll Free DB (322) Fax DWT SOUT FRIC Podium at Menlyn, 3rd Floor, Unit 31b, 3 Ingersol Road, C/O Lois and tterbury street, Menlyn, Pretoria, 11 - South-frica info.sa@dwtgroup.com Tel Fax DB PUMPS CIN No. Kaituo Road, Qingdao Economic & Technological Development Zone Qingdao City, Shandong Province - China PC: 266 info.china@dwtgroup.com Tel Fax DB PUMPEN DEUTSCLND Gmb Tackweg 11 D Tönisvorst - Germany info.germany@dwtgroup.com Tel Fax OOO DB PUMPS Novgorodskaya str. 1, block G office 3, 12727, Moscow - Russia info.russia@dwtgroup.com Tel Fax DB PUMPS DE MÉXICO, S.. DE C.V. v Gral Álvaro Obregón 27, oficina 3 ipódromo, Cuauhtémoc 61 México, D.F. Tel /216
ELECTRONIC WET ROTOR CIRCULATORS
ELECTRONIC WET ROTOR CIRCULATORS TECNICAL DATA EVOTRON WET ROTOR ELECTRONIC CIRCULATORS Operating range: from, -, m/h with head of up to metres. Pumped liquid temperature range: from -1 C to +11 C. Working
More informationELECTRONIC WET ROTOR CIRCULATORS
ELECTRONIC WET ROTOR CIRCULTORS Technical Sheet ELECTRONIC CIRCULTORS FOR ETING ND IR CONDITIONING SYSTEMS Energ ia e y GENERL DT compliant with the 3 and european directive ErP 9//EC (ex EuP) pplications
More informationELECTRONIC CIRCULATORS FOR HEATING AND COOLING SYSTEMS. ErP. eady
ELECTRONIC CIRCULATORS OR EATING AND COOLING SYSTEMS ErP eady TECNICAL DATA EVOSTA 2 WET ROTOR ELECTRONIC CIRCULATORS Operating range:,-3,6 m 3 /h with head up to 6,9 metres. Pumped liquid temperature
More informationK DOUBLE-IMPELLER DOUBLE-IMPELLER ELECTRIC PUMPS
K DOUBLE-IMPELLER DOUBLE-IMPELLER ELECTRIC PUMPS ENERGY EFFICIENCY 7.5 TECHNICL DT Operating range: from,2 to 3 m 3 /h with head up to 97 metres. Pumped liquid: clean, free of solids and abrasives, non-viscous,
More informationEVOTRON WET ROTOR ELECTRONIC CIRCULATORS TECHNICAL DATA APPLICATIONS ADVANTAGES
TECNICAL DATA EVOTRON Operating range: from, -, m3/h with head of up to metres. Pumped liquid temperature range: from - C to + C. Working pressure: bar ( kpa). Protection class: IP X. Insulation class:
More informationELECTRONIC CIRCULATORS FOR HEATING AND COOLING SYSTEMS
EECTRONIC CIRCUTORS OR ETING ND COOING SYSTEMS EVOST ET ROTOR EECTRONIC CIRCUTORS EVOST ET ROTOR EECTRONIC CIRCUTORS in line with European Directive ErP 9//EC (formerly EuP) of TECNIC DT PPICTIONS ow energy
More information50 Hz n= 2900 rpm. Standardised EN 733 centrifugal pumps INSTALLATION AND USE. PERFORMANCE RANGE Flow rate up to 6000 l/min (360 m³/h) Head up to 98 m
F Standardised EN 733 centrifugal pumps Hz n= 9 rpm Clean water Industrial use PERFORMNCE RNGE Flow rate up to (3 ) Head up to 9 m PPLICTION LIMITS Manometric suction lift up to 7 m Liquid temperature
More informationbarmesapumps.com SELF-PRIMING CENTRIFUGAL TRASH PUMP SPECIFICATIONS Series: SH8-U Suction: 8" Discharge: 8" Spherical solids handling: 3"
SELF-PRIMING CENTRIFUGAL TRASH PUMP Series: SH-U Suction: " Discharge: " Spherical solids handling: 3" SIZE BEARING - PUMP END " x " NPT, lbs., female flange. Open single ball, radial load. LIQUID TEMPERATURE
More informationP U M P S. The quality standard for hydraulic efficiency and suction lift. PERIPHERAL PUMPS TEP/ TSP - SERIES 50Hz
P U M P S THE BENCHMARK FOR PERFORMANCE The quality standard for hydraulic efficiency and suction lift. PERIPHERAL PUMPS TEP/ TSP - SERIES 5Hz I N D E X TEP / TSP SERIES - PERIPHERAL PUMPS Page No. General
More informationTPH. 60Hz. Standard mode TPH 4T 2K. Code TPH 4T 2K S F A H
C US NSF/ANSI TPH Applications: The TPH Series are modernly designed with quiet and high efficient operation pumps, suitable for dependable water transfer, circulating or booster service. -Industrial circulation
More informationP U M P S. The quality standard for hydraulic efficiency and suction lift. PERIPHERAL PUMPS TEP/ TSP - SERIES 50Hz
P U M P S THE BENCHMARK FOR PERFORMANCE The quality standard for hydraulic efficiency and suction lift. PERIPHERAL PUMPS TEP/ TSP - SERIES 5Hz I N D E X TEP / TSP / TRP SERIES - PERIPHERAL PUMPS Page
More informationHigh-efficiency Circulator Pump. Rio-Eco N / Rio-Eco Z N. Type Series Booklet
High-efficiency Circulator Pump Rio-Eco N / Rio-Eco Z N Type Series Booklet Legal information/copyright Type Series Booklet Rio-Eco N / Rio-Eco Z N KSB Aktiengesellschaft All rights reserved. The contents
More informationNKVE VERTICAL AXIS MULTISTAGE CENTRIFUGAL PUMPS WITH MCE/P INVERTER
NKVE 1-1--3--6-9 VERTICAL AIS MULTISTAGE CENTRIFUGAL PUMPS WIT MCE/P INVERTER TECNICAL DATA Operating range: fro to 118 3 /h with head up to 31 etres. Puped liquid: clean, free of solids and abrasives,
More informationCalio-Therm NC Type Series Booklet
High-efficiency Drinking Water Pump Type Series Booklet Legal information/copyright Type Series Booklet All rights reserved. The contents provided herein must neither be distributed, copied, reproduced,
More informationDOMESTIC HOT WATER PUMPS WITH FIXED-SPEED MOTOR, 3x400V AP-, AKP- and AEP- series, threaded G1/2 G1 ¼ LOREM IPSUM JE ZULT MAAR 60 HZ.
LOREM IPSUM JE ZULT MAAR HZ m Head m/s m/s m/s m/s m/s Ø m Ø Ø Ø Ø l/s Flow kw Shaft power P Ø m/h Ø 9 Ø Ø kw 9 Total input power P Ø DOMESTIC HOT WATER PUMPS WITH FIXED-SPEED MOTOR, xv AP-, AKP- and AEP-
More informationLinear Motors with ATEX and IECEx Certification
Linear Motors with EX Linear Motors with TEX and IECEx Certification Designed for explosion proof environement Categories: gas zones 1/2, dust zones 21/22 Stainless steel housing EN1.444 / ISI 316 Completely
More informationDEBEM IM VERTICAL CENTRIFUGAL PUMPS.
IM VERTICA CENTRIFUGA PUMPS The IM series of resin-encased vertical centrifugal pumps features high-performance pumps for fixed installations with pump immersed directly in the tank and operated by a directdrive
More informationSubmersible Pump in Discharge Tube. Amacan P. 60 Hz. Type Series Booklet
Amacan P Hz Type Series Booklet Legal information/copyright Type Series Booklet Amacan P All rights reserved. The contents provided herein must neither be distributed, copied, reproduced, edited or processed
More informationContents. Performance Curves/Technical Data. General Data Performance Range Sectional Drawing TPH 2T TPH 4T TPH 8T TPH 12T TPH 25T TPH 50T
Contents General Data Performance Range Sectional Drawing Performance Curves/Technical Data T T T T T 8T T T T T T T 7 9 T Series Multistage Centrifugal Pump Hz Power:.. kw Head: Up to 7M Flow: Up to L/min
More informationAir Cooler Industry AC-LN 1-7 / ACA-LN 2-7 / ACAF-LN 2-7
ir ooler Industry -LN -7 / -LN -7 / F-LN -7 Symbol General The -LN -7 air cooler series can be used in all areas where either oil or water-glycol is to be cooled with air. The coolers with an axial fan
More informationKLME - KLPE / DKLME - DKLPE IN-LINE CONSTANT PRESSURE PUMPS
KLME - KLE / DKLME - DKLE IN-LINE CONSTNT RESSURE UMS CIRCULTORS ND IN-LINE UMS ENERGY EFFICIENCY ETING, IR CONDITIONING SYSTEMS, SOLR NEL ND OT TER SYSTEMS Circulator for hot or cold water with in-line
More informationABB SpA COMEM Operating Unit Strada Regionale 11, Signolo Montebello Vicentino (VI) - ITALY
ABB SpA COMEM Operating Unit Strada Regionale 11, Signolo 22 36054 Montebello Vicentino (VI) - ITALY www.abb.com/transformercomponents The information contained in this document is for general information
More informationMX Series COMPACT AND USER FRIENDLY. Metal Tube Type Variable Area Flowmeter OUTLINE STANDARD SPECIFICATION MODEL CODE MX-400, MX-71 MX-52E
OMPT ND USER FRIENDLY MX Series Metal Tube Type Variable rea Flowmeter OUTLINE MX Series flowmeter is the metal tube type variable area flowmeter having the unified face-to-face dimension. The compact
More informationGRUNDFOS DATA BOOKLET MAGNA, UPE. Series 2000 circulator pumps
GRUNDFOS DATA BOOKLET MAGNA, UPE Series circulator pumps Contents Product data MAGNA and UPE 3 Duty range 3 Characteristic features 3 Benefits 3 Applications 3 eating systems 3 Pumped liquids Type key
More information143 EEX gerotor pump unit. For use in oil circulation systems in gas- and dust-ex-atmospheres
1 EEX gerotor pump unit For use in oil circulation systems in gas- and dust-ex-atmospheres Gerotor pump series 1 EEX The 1 EEX product series has been specifically designed for centralized lubrication
More informationCME / CM-GE / DCME IN-LINE CONSTANT PRESSURE PUMPS. TECHNICAL DATA - CME/CM-GE single flanged
CIRCUTORS ND IN-INE UMS ENERGY EFFICIENCY Circulation pups with in-line ports, suitable for installation in heating and air conditioning, refrigeration, and doestic hot water systes. Extreely versatile
More informationLES. Single-stage end-suction pumps Identification Type key
Contents Singlestage endsuction pumps Identification Type key Product data Introduction Applications Features and benefits Performance range pole pole 6 pole Construction Sectional drawing Construction
More informationGRUNDFOS DATA BOOKLET MAGNA, UPE. Series 2000 circulator pumps
GRUNDFOS DATA BOOKLET Series circulator pumps Contents Product data MAGNA and UPE 3 Duty range 3 Characteristic features 3 Benefits 3 Applications 3 eating systems 3 Pumped liquids 3 Type key Performance
More informationSingle Phase Motors Technical Datasheets
Single Phase Motors Technical Datasheets EN A dynamic, strong and ambitious Group: Orange1 Holding is an international renown Group, one of the most important European manufacturers of single-phase and
More informationNM, NMD 60 Hz NM, NMD. Close Coupled Centrifugal Pumps with threaded ports
, D z Close Coupled Centrifugal ups Construction Close-coupled, centrifugal pups; electric otor with extended sha directly connected to the pup. : single-ipeller D: with two back-to-back ipellers (with
More informationGRUNDFOS DATA BOOKLET MAGNA, UPE. Series 2000 circulator pumps
GRUNDFOS DATA BOOKLET Series circulator pumps Contents Product data MAGNA and UPE 3 Duty range 3 Characteristic features 3 Benefits 3 Applications 3 eating systems 3 Pumped liquids Type key 5 Performance
More informationDBS315 1-phase SIDE CHANNEL BLOWERS
DBS15/ 1-phase DESCRIPTION Dutair blowers for pressure and vacuum are compact machines consisting of an electric motor with a built-on pump housing. The rotational speed of the impeller creates a high
More informationGRUNDFOS DATA BOOKLET MAGNA, UPE. Series 2000 circulator pumps
GRUNDFOS DATA BOOKLET MAGNA, UPE Series circulator pumps Contents Product data MAGNA/UPE 3 Duty range 3 Characteristic features 3 Benefits 3 Applications 3 eating systems 3 Pumped liquids 3 Type key Performance
More informationVOLUMEC. Valve Position Indicator 5
VOLUMEC Valve Position Indicator 5 2 KRACHT CORP. 8600 S Wilkinson Way Unit A Perrysburg, OH 43551 USA P +1 419 874 1000 F +1 419 874 1006 flowmeters@krachtcorp.com www.krachtcorp.com VOLUMEC Valve Position
More informationTPH Series 50Hz Multi-stage Centrifugal Pump
WLRUS PUMP T Series Hz Multistage Centrifugal Pump ll specifications are subject to change without notice. 9 T Product data pplications Page Standard mode Page Operation conditions Page Pump construction
More informationCHINA MP FILTRI P.O. Box Shanghai Phone: Fax:
FMP 038 uk 6-07-006 9:34 Pagina (,) New Headquarters : MP FILTRI S.p.A. Italy Via Maggio, n. 3 0060 Pessano con Bornago (Milano) Italy Tel. +39.0/95703. Fax +39.0/9574497-9574088 email: sales@mpfiltri.com
More informationContents. Identification LHC. Horizontal split case pumps. Type key. Identification Type key
Contents dentification Type key Product data ntroduction Applications Features and benefits Performance range pole pole pole Construction Sectional drawing Construction features Test pressure Operating
More informatione-mp Series MPA, MPR, MPD, MPV Lenntech 50 Hz Tel Fax
Hz e-mp Series MPA, MPR, MPD, MPV HIGH PRESSURE MULTISTAGE PUMPS ACCORDING TO ISO 199 Lenntech info@lenntech.com Tel. +31-1-1-9 www.lenntech.com Fax. +31-1-1-9 Cod. 1911 Rev. A Ed.3/17 Xylect TM Xylect
More informationSERIES. Maximum pressure 8 bar
SERIES Maximum pressure 8 bar F l o w r a t e s t o 0 0 l / m i n OLD MPF 00 NEW MPF 00 8 75 80 5-6 5,5 5,5 Nr. holes Ø 8,5 55 55 Nr. slots Ø 8,5 Up to: G NPT SAE 6 Up to: G / SAE 0 DIFFERENCE BETWEEN...
More informationHD 049 HD 069 HD 172 HD 319 HD 419 HD 619. Operating pressure up to 8700 psi Nominal flow rate up to gpm us
H i g h P re s s u re i l t e r K i t s H 049 H 069 H 172 H 319 H 419 H 619 Operating pressure up to 8700 psi Nominal flow rate up to 118.9 gpm 40.95-3us e s c r i p t i o n pplication In the high pressure
More informationCMA - B - C - D - CMR
Cast iron self-priming electric pumps. APPLICATIONS Pressure boosting domestic plants Small-scale irrigation Moving non-aggressive liquids for civil and industrial use Washing plants Washing vehicles CMA-B-C-D
More informationSVH with HYDROVAR (HVL range)
SVH with HYDROVAR (HVL range) SVH-HVL Rev. B Ed.9/1 (EN) SVH SERIES (e-sv WITH HYDROVAR) Background and context For all pumping needs in commercial or residential building and in industry applications,
More informationUNI EN ISO 9001:2008 UNI EN ISO 14001:2004 BS OHSAS 18001:2007 EC DIRECTIVE 2014/34/EU (ATEX) CERTIFIED MANAGEMENT SYSTEM
EN ISM-BSM CERTIFIED Technology Made in Italy Since 1955 the Varvel Group has been making speed reducers and variators for light industry applications. Reliable partner in power transmission equipment
More informationThe FLUX F 430 with mechanical seal
The FLUX F 0 with mechanical seal Flexible coupling between motor and pump The pump must be used with many varying liquids, consequently the smallest residual left within the pump is unacceptable. You
More informationPrima range. Alifter range. magnetical driven pumps in thermoplastic materials TMP TMA. centrifugal. self-priming
Prima range TMP centrifugal Alifter range magnetical driven pumps in thermoplastic materials TMA self-priming Prima - Alifter In this catalog Argal proposes the range of PRIMA pumps, magnetical driven,
More informationMade in Italy HOSE REELS CATALOGUE TECHNOLOGY FOR FLUIDYNAMICS. No. E14/A1
Made in Italy HOSE REELS CATALOGUE TECHNOLOGY FOR FLUIDYNAMICS No. E14/A1 The complete range of our products is presented in the specific catalogues: HOSE REELS CATALOGUE No. E14/A2 HOSE REELS CATALOGUE
More informationSubmersible Pump in Discharge Tube. Amacan K. 60 Hz. Type Series Booklet
Submersible Pump in Discharge Tube Amacan K Hz Type Series Booklet Legal information/copyright Type Series Booklet Amacan K All rights reserved. The contents provided herein must neither be distributed,
More informationSERIES INLINE FILTERS LMP 210. Maximum pressure 60 bar Maximum flow to l / mi n
SERIES INLINE FILTERS LMP 0 Maximum pressure 60 bar Maximum flow to 0 0 l / mi n SERIES LMP 0 Working pre s s u re 60 bar Style S Style B B B D.I. D.I. A A Technical data Filter housing ( M a t e r i a
More informationALUMINIUM CENTRIFUGAL FANS. 4 x M6 x OUTLET x M6 x 20
DESCRIPTION Dutair LK-series industrial ventilators consist of a robust body made from die-cast aluminium alloy. Impellers are made of extruded aluminium. The asynchronous electric motors are maintenance
More informationALUMINIUM CENTRIFUGAL FANS x M6 x x M6 x 16
LK4 DESCRIPTION Dutair LK-series industrial ventilators consist of a robust body made from die-cast aluminium alloy. Impellers are made of extruded aluminium. The asynchronous electric motors are maintenance
More informationDMP 331P. Industrial Pressure Transmitter. Process Connections With Flush Welded Stainless Steel Diaphragm
DMP P Industrial Pressure Transmitter Process Connections With Flush Welded Stainless Steel accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 % FSO Nominal pressure from 0... 00 mbar up
More informationMULTISTAGE CENTRIFUGAL PUMP TPH 2/4/8/12/25/50T. 50Hz. WALRUS PUMP ISO 9001 Certified
MULTISTAGE CENTRIFUGAL PUMP TPH /////T Hz WALRUS PUMP ISO Certified TPH Applications The WALRUS TPH Series is horizontal multistage centrifugal pump, suitable for clean water/liquid without abrasive matters.
More informationCartridge Valves Technical Information. Quick reference
Quick reference Contents CPF0... 8. CP600-5... 8. CP60-5... 8. 066 handle kit... 8.5 MP06... 8.6 MP... 8.6 X05-FD0 Traction manifold... 8.9 X05-FD6 Traction manifold... 8.0 X05-FD0 Traction manifold...
More informationHigh Pressure fi lters. FHB series. Maximum working pressure up to 32 MPa (320 bar) - Flow rate up to 485 l/min
High Pressure fi lters FHB series Maximum working pressure up to MPa (0 bar) - Flow rate up to 8 l/min High Pressure fi lters Introduction FILTER SIZING INDEX CALCULATION CORRECTIVE FACTOR Page Introduction
More informationStandardized Chemical Pumps to EN /ISO 2858/ISO 5199 sealless, with magnetic drive. Fields of Application. Designation. Design.
Type series booklet.5/- G2 Magnochem Standardized Chemical Pumps to EN 5/ISO 25/ISO 99 sealless, with magnetic drive Automation products available: PumpExpert Hyamaster hyatronic Fields of Application
More informationSingle Phase Motors Technical Datasheets
Single Phase Motors Technical Datasheets EN A dynamic, strong and ambitious Group: Orange1 Holding is an international renown Group, one of the most important European manufacturers of single-phase and
More informationFlow rates to 485 l/min
FB Maximum pressure 0 bar Flow rates to 8 l/min Technical data Filter housing (Materials) ead: Cast iron (chemical heat treatment) ousing: Steel (chemical heat treatment) Bypass valve: Steel Check valve:
More informationStandardized Chemical Pumps. Fields of Application. Designation. Design. Operating Data. Type Series Booklet /7-10 G2 CPK-H
Type Series Booklet.5/7-0 G CPK-H Standardized Chemical Pumps to EN 5/ISO 5/ISO 599, heatable Automation products available: Hya-Drive Hyamaster hyatronic Fields of Application CPK-H pumps are used for
More informationEx-Floodlights of the series FMV LED / NFMV / NSSFMV. Stainless steel NSSFMV floodlights for particularly. in harsh environments
.13 Ex-Floodlights of the series / / (Zone 2, 21, 22) The powerful LED floodlights FMV/nFMV LED The new series of energy-saving FMV floodlights in LED technology are ideal for all ge neral lighting applications
More informationJET SELF-PRIMING CENTRIFUGAL PUMPS DIMENSIONS AND WEIGHTS JET JET
JET SELFRIMING CENTRIFUGL UMS JET M JET T JET M JET T JET M JET T JET M JET T JET M JET T JET M JET T JET M JET T JET M JET T JET M JET T JET M JET T VOLTGE z x V~ x V~ x V~ x V~ x V~ x V~ x V~ x V~ x
More informationSerie B2.1. Flanged ductile iron ball valve. made in. Application fields. Shut-off valves E U R O P E. 18
erie B. Flanged ductile iron ball valve BRanDOni made in E U R O P E Application fields WATER CONdITIONING GA EATING INdUTRY FIRE FIGTING www.brandoni.it erie B. eries B. valves are shut-off ball valves
More informationAbsolute encoders multiturn
elektronischer electronic multiturn, Multiturn, magnetic magnetisch Sendix M66 / M68 (shaft / hollow shaft) The Sendix M6 with Energy Harvesting Technology is an electronic multiturn encoder in miniature
More informationMaximum pressure 420 bar Flow rate to 152 l/min. 560 bar. 140 l/min. Flow rate l/min FMM 050 1/2 1,50 3/4 1,00. Δp bar 0,50 0,00 FHA 051 1,50 1,00
FMM 00 Maximum pressure 0 bar Flow rate to l/min FHA 0 Maximum pressure 60 bar Flow rate to 0 l/min Technical data FMM 00 Filter housing (Materials) Head: Cast iron (chemical heat treatment) Housing: Steel
More informationJETINOX SELF-PRIMING CENTRIFUGAL ELECTRIC PUMPS
JETINOX SELF-RIMIN ENTRIFUL ELETRI UMS TENIL DT Operating range: fro. to 1. /h with head up to etres. Liquid quality requireents: clean, free fro solid or abrasive containants, non-viscous, non-aggressive,
More informationSubmersible Pump in Discharge Tube. Amacan P. 50 Hz. Type Series Booklet
Amacan P 50 Hz Type Series Booklet Legal information/copyright Type Series Booklet Amacan P All rights reserved. The contents provided herein must neither be distributed, copied, reproduced, edited or
More information4.13. Ex-Floodlights of the series FMV LED / NSSFMV. (Zone 2, 22) service life and a high level of efficiency. NFMV floodlights for highpressure
.13 Ex-Floodlights of the series / (Zone 2, 22) The powerful LED floodlights FMV LED The new series of energy-saving FMV floodlights in LED technology are ideal for all general lighting applications in
More informationVariable Displacement Plug-In Motor A6VE. Series 6, for open and closed circuits Axial tapered piston, bent axis design
rueninghaus Hydromatik Series 6, for open and closed circuits xial tapered piston, bent axis design Size 28...20 Nom. pressure up to 400 bar Peak pressure up to 40 bar RE 9606/0.97 RE 9606/0.97 replaces
More informationTangential Fans Series TW Impeller diameter 150 mm and 200 mm
Tangential Fans Series TW Impeller diameter mm and 0 mm 105 Corporate Drive, Suite E Spartanburg, SC 293 PO Box 2889, Spartanburg, SC 294 USA Tel: 864-599-63 Fax: 864-599-6344 e-mail: info@ltg-inc.net
More informationFlow rates to 475 l/min
FMP Maximum pressure 0 bar Flow rates to 7 l/min Technical data PRSSUR FILTR Filter housing (Materials) ead: Cast iron (chemical heat treatment) ousing: Steel (chemical heat treatment) Bypass valve: Brass
More informationALUMINIUM CENTRIFUGAL FANS M20 4 x M5 x 10 INLET. 4 x M5 x 12
BCT61 DESCRIPTION Dutair BCT-series aluminium centrifugal fans with open die-cast aluminium impellers and forward curved blades are suitable for material transport and high pressure applications. The asynchronous
More informationLinear actuator Econom 2. Our intelligent model: Econom 2. Econom 2
Linear actuator Econom 2 Our intelligent model: Econom 2 Econom 2 Linear actuators Econom 2 Description Applications Facts The users of the Econom 2 come from many different industries: From architects
More informationALUMINIUM CENTRIFUGAL FANS. 4 x M6 x 16
DESCRIPTION Dutair BCT-series aluminium centrifugal fans with open die-cast aluminium impellers and forward curved blades are suitable for material transport and high pressure applications. The asynchronous
More informationDigital AC Motors MHD
Digital AC Motors MHD090 8-1 8 MHD090 8.1 Technical Data Description Symbol Unit MHD090B-035 Type of cooling Natural Natural Surface Liquid Motor overtemperature 60 K 100 K 60 K/100 K 60 K/100 K Electric
More information4.2. Ex-Ceiling light fittings AB 80 / AB 05 LED / AB 05 / AB 12 NAV 70. (Zone 1, 2, 21, 22)
.2 Ex-Ceiling light fittings AB 8 / AB 5 LED / AB 5 / AB 12 NAV 7 (Zone 1, 2, 21, 22) The wall and ceiling light fixtures for particularly difficult operating conditions The impact-resistant and flameproof
More informationZ7A. Load cells. Special features. Data sheet. Wiring code
Z7A Load cells Special features - Complies with OIML R60 regulations up to 3000 d - Max. capacities: 500 kg... 10 t - Fulfills EMC requirements in accordance to EN 45 501 - Low transducer height - Robust
More informationTurbine Meter TRZ 03 PRODUCT INFORMATION. Reliable Measurement of Gas
Turbine Meter TRZ 0 PRODUCT INFORMATION Reliable Measurement of Gas TURBINE METER TRZ 0 Method of operation, Construction Method of operation The TRZ 0 turbine meter is a flow meter suitable for gas measurement
More informationPneumatic Universal. Actuator MOTORIZED VALVES USE TECHNICAL FEATURES OF THE ACTUATOR. Data sheet
Data sheet. - 8 USE The motorized valve is specifically used for the interception and regulation of fluids in: systems using alternative energy industrial systems in general using hot and cold fluids automation
More informationFlow rates to 750 l/min
FP Maximum pressure 0 bar Flow rates to 70 l/min Technical data Filter housing (Materials) ead: Cast iron (chemical heat treatment) ousing: Steel (chemical heat treatment) Bypass valve: AISI L (FP 00-0)
More informationIL series. Centrifugal marine IN-LINE pumps
IL series Centrifugal marine IN-LINE pumps DESCRIPTION Vertically built centrifugal IN-LINE pumps are made with standardized DIN-22 parts, with in-line suction and discharge flanges. This arrangement requires
More information50/60 Hz. ecocirc XL and XLplus. high efficiency WET ROTOR circulators. ErP 2009/125/EC
/ Hz ecocirc XL and XLplus high efficiency WET ROTOR circulators FOR COMMERCIAL HEATING AND COOLING applications ErP 9/1/EC Cod. 1971 Rev. C Ed.11/1 Lowara, ecocirc, Xylect are trademarks of Xylem Inc.
More informationSINGLE IMPELLER CENTRIFUGAL ELECTRIC PUMPS in cast iron
Cast iron self-priming electric pumps. APPLICATIONS Pressure boosting domestic plants Small-scale irrigation Moving non-aggressive liquids for civil and industrial use Washing plants Washing vehicles CMA-B-C-D
More informationProduct Data CNPVP, CNPVT, CNPVU, CNRVU EVAPORATOR COIL N COIL - CASED AND UNCASED UPFLOW, DOWNFLOW
CNPVP, CNPVT, CNPVU, CNRVU EVPORTOR COIL N COIL - CSED ND UNCSED UPFLOW, DOWNFLOW Product Data CNPVP CNPVT (Transition) CN(P,R)VU 06008 06007 06004 This vertical design N -coil is a furnace coil designed
More informationAir distribution systems. Adjustable radial outlet RA-V...
Air distribution systems Adjustable radial outlet RA-V... DS E 0.2013 Construction design Preliminary remarks KRANTZ KOMPONENTEN has developed its wellknown, successful radial outlet into an adjustable
More informationFull Metal Variable Area Flow Meter and Counter
Full Metal Variable rea Flow Meter and Counter for horizontal and vertical mounting measuring monitoring analysing Special versions up to 600 bar Measuring range: 10-100...00-000 L/h water 0.3-3.0...-0
More informationHigh Pressure fi lters. FHA 051 series. Maximum working pressure up to 56 MPa (560 bar) - Flow rate up to 140 l/min. High Pressure fi lters
High Pressure fi lters FHA 0 series Maximum working pressure up to 6 MPa (60 bar) Flow rate up to 0 l/min 99 High Pressure fi lters Introduction FILTER SIZG DEX CALCULATION CORRECTIVE FACTOR Page Introduction
More information14:1400 (0206) KRAL Volumeter - OMG
14:1400 (0206) KRAL Volumeter - OMG OMG - Universal OMG The flowmeter for a wide range of applications Operating Conditions and Materials Flow Range: 0.1 to 7,500 l/min Max. Pressure: 250 bar Temperature
More informationField IT 50T Series Transmitters
Data Sheet SS/G/A_ Field IT 0T Series Transmitters gauge/absolute pressure transmitter Ranges: -00 to 0000kPa - to 00bar -. to 6000psi Base accuracy : 0.% (BFSL) Chemical Vapour Deposition (CVD) technology
More information4/3, 4/2 and 3/2 directional valve with wet-pin AC or DC solenoid
01/0 /3, / nd 3/ directionl vlve with wet-pin AC or DC solenoid Type WE...L7X.11 Size (NG) Up to 315 br Up to 0 L/min Contents Function nd configurtions Specifictions Symbols 03 Technicl dt 03 Electric
More informationA wide selection of pipe and orifice sizes is offered. Valves are available with threaded ports in brass and stainless steel.
Solenoid Valve Waterhammer-Free, 0- PSI /-Way; NPT - NPT; 0- PSI Advantages/Benefits Type 63 Waterhammer-free Low noise Zero differential pressure ompact design with high flow rates Low maintenance oil
More informationIts modular concept allows to build up a ball valve for any degree of automation and any kind of application
Type 2657...59 DN 10 up to 80 mm; Plastic; 2/2 way dvantages/benefits ntegrated pilot valves, position feed-back and limit switches available Customized system solutions with Burkert valves & sensors With
More informationAir distribution systems. Radial outlet RA-N2...
Air distribution systems Radial outlet RA-N... DS E 0.01 Radial outlet RA-N Preliminary remark KRANTZ KOMPONENTEN radial outlets RA-N have fixed radial vanes and are available with circular or square face.
More informationAT SERIES OFF CIRCUIT TAP CHANGERS
T SERIES OFF CIRCUIT TP CHNGERS THE CHOICE COE S.P.. PUTS ON THE RKET THE NEW T SERIES OFF CIRCUIT TP CHNGERS. T COE: THE CHOICE Comem S.p.. makes use of four main characteristics in order to be successful
More informationAPEX DYNAMICS, INC. Staianless
APEX DYNAMICS, INC. HIGH PRECISION PLANETARY GEARBOXES AE / AER Series Staianless High precision high speed planetary gearboxes AE / AER series Apex Dynamics, Inc. is the world s most productive manufacturer
More informationTSK. Flap-Type Flowmeter. Range: to GPM Accuracy: ± 2.5% of Full Scale P max. : 580 PSI T max
Flap-Type Flowmeter measuring monitoring analyzing TSK Range: 6.6...26.4 to 880...6600 GPM Accuracy: ± 2.5% of Full Scale P max : 580 PSI T max : -40 572 F Connection: Wafer Flange 1.5" 20" ASME Material:,
More information60 Hz. e-nsc Series HORIZONTAL CENTRIFUGAL ELECTRIC PUMPS EQUIPPED WITH IE3 MOTORS
6 Hz e-nsc Series HORIZONTAL CENTRIFUGAL ELECTRIC PUMPS EQUIPPED WITH IE3 MOTORS Cod. 19112831 Rev. B Ed.7/217 Xylect TM Xylect TM is a pump solution software with an extensive online database of product
More informationCipriani Harrison Valves Corp.
Butterfly Valve pplication Stainless steel hygienic butterfly valves are used in process piping systems for isolation and control. Butterfly valves operate either manually or automatically. Working Principle
More informationTransmitters for basic requirements SITRANS P MPS (submersible sensor) Transmitter for hydrostatic level
Overview Function s are for measuring the liquid levels in wells, tanks, channels and dams. Sensor Diaphragm p U const. U +2 (brown) I EM I - (blue) 0, U B s are submersible sensors for hydrostatic level
More informationPressure Measurement. Transmitters for basic requirements SITRANS P MPS (submersible sensor) Transmitter for hydrostatic level 2/27
Overview Siemens AG 011 Function s are for measuring the liquid levels in wells, tanks, channels and dams. Diaphragm p Sensor U const. U + (brown) I EM I -1 (blue) 0, U B s are submersible sensors for
More informationOEM Flow sensor for liquid media type 200
OEM Flow sensor for liquid media type 200 Flow range 0.5... 150 l/min Nominal diameters DN 6 / 8 / 10 / 15 / 20 / 25 Temperature measurement -40... +125 ÀC The flow sensor type 200 is based on the Kármán
More informationPro-V Multivariable Flowmeter Model M23 Insertion Vortex
Pro-V Multivariable Flowmeter Model M23 Insertion Vortex Pro-V TM Advantage: Volumetric or mass flow monitoring of most liquids, gases, and steam Multivariable meter delivers mass flow, temperature, pressure,
More information