50 Hz n= 2900 rpm. Standardised EN 733 centrifugal pumps INSTALLATION AND USE. PERFORMANCE RANGE Flow rate up to 6000 l/min (360 m³/h) Head up to 98 m

Size: px
Start display at page:

Download "50 Hz n= 2900 rpm. Standardised EN 733 centrifugal pumps INSTALLATION AND USE. PERFORMANCE RANGE Flow rate up to 6000 l/min (360 m³/h) Head up to 98 m"

Transcription

1 F Standardised EN 733 centrifugal pumps Hz n= 9 rpm Clean water Industrial use PERFORMNCE RNGE Flow rate up to (3 ) Head up to 9 m PPLICTION LIMITS Manometric suction lift up to 7 m Liquid temperature between - C and +9 C mbient temperature between - C and + C Max. pressure in pump body bar (PN) Continuous service S1 CONSTRUCTION ND SFETY STNDRDS EN 33-1 EN 3-1 IEC 33-1 IEC 3-1 CEI 1-1 CEI -3 Pump body dimensions in compliance with EN 733 EU REGULTION N. 7/1 INSTLLTION ND USE Water supply Pressure boosting Irrigation Water circulation in airconditioning units Cleaning sets Firefighting sets Industrial applications gricultural applications The pump should be installed in an enclosed environment or sheltered from inclement weather. OPTIONS VILLE ON REUEST Counter flange KIT complete with bolts, nuts and washers Special mechanical seal Other voltages or Hz frequency Compatibility with hotter or colder liquids Compatibility with hotter or colder environments CERTIFICTIONS Company with management system certified DNV ISO 91: ULITY ISO 11: ENVIRONMENT 13

2 PERFORMNCE RNGE Hz n= 9 rpm / / / / / / F 3 Head H (metres) 3 1 3/ / 3/1 /1 /1 / /1 /1 / /1 /1 / /1 / / Flow rate PERFORMNCE DT Hz n= 9 rpm POWER (P) PERFORMNCE Three-phase kw HP H metres F 3/1C F 3/1. 3 IE F 3/ F 3/C. 31. F 3/. 7. IE3 1 3 F 3/ 7. 7 F 3/H IE3 F 3/H. 3 F 3/C F 3/ 11 1 IE3 7 7 F 3/ 1 97 F /1C F /1 1. IE3. 9 F / F /1C F /1 3 IE3 3 F / F / IE3 F / F /C F / 11 1 IE F / F /1C F /1 3 IE F / F /1C F /1. 7. IE F / F /C F / IE3 F / F /R F /D F /C F / 1 IE F / F /R POWER (P) PERFORMNCE Three-phase kw HP H metres F /1C F /1. 7. IE F / F /1C F / IE F /1 1. F / 1 3. F / 1. IE3 3. F /R 3 7 F /C F / 37 IE3 7 F / 9 F /1D 11 1 F /1C IE3 F / F /1 3 F / IE3 F / F / 3 77 IE3 F / F /1C-N F /1-N 1. IE F /1-N F /C F / 37 IE F / F / IE3 F / = Flow rate H = Total manometric head Tolerance of characteristic curves in compliance with EN ISO 99 Grade 3. Performance class of the three-phase motor (IEC-3-3) 13

3 F 3/ 1 CHRCTERISTIC CURVES ND PERFORMNCE DT Hz n= 9 rpm HS= m 7 F3/ Head H (metres) bsorbed power P (kw) MEI. F3/1 F3/1C Flow rate 7 C η = % P (HP) NPSH () H () POWER (P) Single-phase Three-phase kw HP Fm 3/1C F 3/1C Fm 3/1 F 3/1. 3 H metres F 3/ = Flow rate H = Total manometric head HS = Suction height Tolerance of characteristic curves in compliance with EN ISO 99 Grade 3. 13

4 F 3/ CHRCTERISTIC CURVES ND PERFORMNCE DT Hz n= 9 rpm HS= m F3/ F3/ 3 η = % 17 Head H (metres) bsorbed power P (kw) MEI. F3/C Flow rate C P (HP) NPSH () H () POWER (P) Three-phase kw HP F 3/C F 3/. 7. H metres F 3/ = Flow rate H = Total manometric head HS = Suction height Tolerance of characteristic curves in compliance with EN ISO 99 Grade

5 F 3/H CHRCTERISTIC CURVES ND PERFORMNCE DT Hz n= 9 rpm HS= m 7 Head H (metres) bsorbed power P (kw) MEI. F3/H F3/H η = 3.% 1 Flow rate 1. H H P (HP) NPSH () H () POWER (P) Three-phase kw HP F 3/H H metres F 3/H. 7. = Flow rate H = Total manometric head HS = Suction height Tolerance of characteristic curves in compliance with EN ISO 99 Grade 3. 13

6 F 3/ CHRCTERISTIC CURVES ND PERFORMNCE DT Hz n= 9 rpm HS= m F3/ 3 Head H (metres) bsorbed power P (kw) F3/ F3/C MEI C η =.% P (HP) NPSH () H () 1 3 Flow rate POWER (P) Three-phase kw HP F 3/C F 3/ 11 1 H metres F 3/ = Flow rate H = Total manometric head HS = Suction height Tolerance of characteristic curves in compliance with EN ISO 99 Grade

7 F /1 CHRCTERISTIC CURVES ND PERFORMNCE DT Hz n= 9 rpm HS= m Head H (metres) bsorbed power P (kw) ,. MEI. F/1 F/1 F/1C η = 9% Flow rate C P (HP) NPSH () H () POWER (P) Single-phase Three-phase kw HP 3 7 Fm /1C F /1C Fm /1 F /1 1. H metres F / = Flow rate H = Total manometric head HS = Suction height Tolerance of characteristic curves in compliance with EN ISO 99 Grade 3. 1

8 F /1 CHRCTERISTIC CURVES ND PERFORMNCE DT Hz n= 9 rpm HS= m 1 1 F/1 1 Head H (metres) bsorbed power P (kw) MEI. F/1 F/1C Flow rate η = % 3 C P (HP) NPSH () H () POWER (P) Single-phase Three-phase kw HP Fm /1C F /1C F /1 3 H metres F / = Flow rate H = Total manometric head HS = Suction height Tolerance of characteristic curves in compliance with EN ISO 99 Grade 3. 11

9 F / CHRCTERISTIC CURVES ND PERFORMNCE DT Hz n= 9 rpm HS= m 1 1 Head H (metres) bsorbed power P (kw) MEI. F/ F/ η = % Flow rate P (HP) NPSH () H () POWER (P) Three-phase kw HP F / H metres F / = Flow rate H = Total manometric head HS = Suction height Tolerance of characteristic curves in compliance with EN ISO 99 Grade 3. 1

10 F / CHRCTERISTIC CURVES ND PERFORMNCE DT Hz n= 9 rpm HS= m F/ 3 Head H (metres) bsorbed power P (kw) MEI. F/ F/C 3 7 η = 3% Flow rate C 1 1 P (HP) NPSH () H () POWER (P) Three-phase kw HP F /C F / 11 1 H metres F / = Flow rate H = Total manometric head HS = Suction height Tolerance of characteristic curves in compliance with EN ISO 99 Grade 3. 13

11 F /1 CHRCTERISTIC CURVES ND PERFORMNCE DT Hz n= 9 rpm HS= m 3 F/1 F/ Head H (metres) bsorbed power P (kw) F/1C MEI. η = 7% Flow rate 73 7 C P (HP) NPSH () H () POWER (P) Single-phase Three-phase kw HP Fm /1C F /1C F /1 3 H metres F / = Flow rate H = Total manometric head HS = Suction height Tolerance of characteristic curves in compliance with EN ISO 99 Grade 3. 1

12 F /1 CHRCTERISTIC CURVES ND PERFORMNCE DT Hz n= 9 rpm HS= m 3 F/1 3 F/1 7 7 η = 71% 1 1 Head H (metres) bsorbed power P (kw) F/1C MEI Flow rate 71 7 C P (HP) NPSH () H () POWER (P) Three-phase kw HP F /1C F /1. 7. H metres F / = Flow rate H = Total manometric head HS = Suction height Tolerance of characteristic curves in compliance with EN ISO 99 Grade 3. 1

13 F / CHRCTERISTIC CURVES ND PERFORMNCE DT Hz n= 9 rpm HS= m F/R F/ η = 7% Head H (metres) bsorbed power P (kw) MEI. F/ F/C 1 P (HP) NPSH () H () Flow rate POWER (P) Three-phase kw HP F /C F / H metres F / F /R = Flow rate H = Total manometric head HS = Suction height Tolerance of characteristic curves in compliance with EN ISO 99 Grade 3. 1

14 F / CHRCTERISTIC CURVES ND PERFORMNCE DT Hz n= 9 rpm HS= m F/R 9 F/ η = 1% Head H (metres) bsorbed power P (kw) F/ F/C F/D MEI. 1 P (HP) NPSH () H () Flow rate POWER (P) Three-phase kw HP F /D F /C F / 1 H metres F / F /R = Flow rate H = Total manometric head HS = Suction height Tolerance of characteristic curves in compliance with EN ISO 99 Grade 3. 17

15 F /1 CHRCTERISTIC CURVES ND PERFORMNCE DT Hz n= 9 rpm HS= m 3 3 F/ η = 1% 7 F/1 Head H (metres) bsorbed power P (kw) F/1C MEI C P (HP) NPSH () H () Flow rate POWER (P) Three-phase kw HP F /1C F /1. 7. H metres F / = Flow rate H = Total manometric head HS = Suction height Tolerance of characteristic curves in compliance with EN ISO 99 Grade 3. 1

16 F /1 CHRCTERISTIC CURVES ND PERFORMNCE DT Hz n= 9 rpm HS= m Head H (metres) bsorbed power P (kw) F/1 F/1 F/1C MEI. 7 η = 1% Flow rate C P (HP) NPSH () H () POWER (P) Three-phase kw HP F /1C F / H metres F / = Flow rate H = Total manometric head HS = Suction height Tolerance of characteristic curves in compliance with EN ISO 99 Grade 3. 19

17 F / CHRCTERISTIC CURVES ND PERFORMNCE DT Hz n= 9 rpm HS= m 3 3 F/R F/ 1 Head H (metres) bsorbed power P (kw) F/ MEI. η = % Flow rate P (HP) NPSH () H () POWER (P) Three-phase kw HP F / F / 1. H metres F /R = Flow rate H = Total manometric head HS = Suction height Tolerance of characteristic curves in compliance with EN ISO 99 Grade 3. 1

18 F / CHRCTERISTIC CURVES ND PERFORMNCE DT Hz n= 9 rpm HS= m F/ 9 F/ Head H (metres) bsorbed power P (kw) MEI. F/C η = 73% 1 1 Flow rate C P (HP) NPSH () H () POWER (P) Three-phase kw HP F /C F / 37 H metres F / = Flow rate H = Total manometric head HS = Suction height Tolerance of characteristic curves in compliance with EN ISO 99 Grade 3. 11

19 F /1 CHRCTERISTIC CURVES ND PERFORMNCE DT Hz n= 9 rpm HS= m 3 F/1 F/ η = % 1 Head H (metres) bsorbed power P (kw) 3 1 MEI. F/1C F/1D P (HP) NPSH () H () Flow rate POWER (P) Three-phase kw HP F /1D F /1C H metres F / F / = Flow rate H = Total manometric head HS = Suction height Tolerance of characteristic curves in compliance with EN ISO 99 Grade 3. 1

20 F / CHRCTERISTIC CURVES ND PERFORMNCE DT Hz n= 9 rpm HS= m Head H (metres) bsorbed power P (kw) 3 F/ F/ MEI Flow rate 79 η = % P (HP) NPSH () H () POWER (P) Three-phase kw HP F / H metres F / = Flow rate H = Total manometric head HS = Suction height Tolerance of characteristic curves in compliance with EN ISO 99 Grade 3. 13

21 F / CHRCTERISTIC CURVES ND PERFORMNCE DT Hz n= 9 rpm HS= m F/ 3 7 Head H (metres) bsorbed power P (kw) 7 3 MEI. F/ Flow rate 7 η = 77% P (HP) NPSH () H () POWER (P) Three-phase kw HP F / H metres F / = Flow rate H = Total manometric head HS = Suction height Tolerance of characteristic curves in compliance with EN ISO 99 Grade 3. 1

22 F /1 CHRCTERISTIC CURVES ND PERFORMNCE DT Hz n= 9 rpm HS= m 1 F/1-N 1 Head H (metres) bsorbed power P (kw) MEI. F/1-N F/1C-N 7 73 η = % Flow rate 7 7 C P (HP) NPSH () H () POWER (P) Three-phase kw HP 3 F /1C-N F /1-N 1. H metres F /1-N = Flow rate H = Total manometric head HS = Suction height Tolerance of characteristic curves in compliance with EN ISO 99 Grade 3. 1

23 F / CHRCTERISTIC CURVES ND PERFORMNCE DT Hz n= 9 rpm HS= m F/ Head H (metres) bsorbed power P (kw) MEI. F/ F/C η = 1% Flow rate C P (HP) NPSH () H () POWER (P) Three-phase kw HP F /C F / 37 H metres F / = Flow rate H = Total manometric head HS = Suction height Tolerance of characteristic curves in compliance with EN ISO 99 Grade 3. 1

24 F / CHRCTERISTIC CURVES ND PERFORMNCE DT Hz n= 9 rpm HS= m F/ Head H (metres) bsorbed power P (kw) MEI. F/ η = % η = 79.% Flow rate P (HP) NPSH () H () POWER (P) Three-phase kw HP F / H metres F / = Flow rate H = Total manometric head HS = Suction height Tolerance of characteristic curves in compliance with EN ISO 99 Grade 3. 17

25 F POS. COMPONENT CONSTRUCTION CHRCTERISTICS 1 PUMP ODY Cast iron complete with flanged suction and delivery ports a ODY CKPLTE Cast iron for F3/1, F3/, F/1, F/1, F/, F/1, F/1, F/1 b MOTOR RCKET Cast iron for F3/, F/, F/, F/, F/1, F/, F/, F/1, F/, F/, F/1, F/, F/ 3 IMPELLER rass for F3/1, F3/, F/1, F/1, F/, F/1, F/1 Cast iron for F3/, F/, F/, F/, F/1, F/1, F/, F/, F/1, F/, F/, F/1, F/, F/ MOTOR SHFT Stainless steel EN MECHNICL SEL Pump Seal Shaft Materials Model Model Diameter Stationary ring Rotational ring Elastomer F3/1, F/1, F/1, /1 FN- Ø mm Graphite Ceramic NR F3/, F/, F/1, F/1 FN- Ø mm Graphite Ceramic NR F/, F/1, F/, F/1, F/1 FN-3 NU Ø 3 mm Graphite Ceramic NR F3/, F/, F/ FN-3 Ø 3 mm Graphite Ceramic NR F/, F/, F/, F/ FN- NU Ø mm Graphite Ceramic NR F/, F/ FH- NU Ø mm Graphite Ceramic NR ERINGS Pump Model Pump Model F3/1C F3/1 F/1 F/1C F/1C Fm3/1 F3/1 Fm/1C F/1 Fm/1C F/1 F/1 F/1 F3/ F/1 F/ F/1 ZZ-C3 / ZZ ZZ-C3 / ZZ 3 ZZ-C3 / ZZ-C3 37 ZZ-C3 / ZZ-C3 F3/ F/ F/ F/ F/ F/ F/ F/ F/ F/1 F/1 F/1 F/ F/ 3 ZZ-C3 / 3 ZZ-C3 31 ZZ-C3 / 1 ZZ-C3 31 ZZ-C3 / 313 ZZ-C3 7 CPCITOR Pump Capacitance Single-phase (3 V or V) Fm3/1C μf - VL Fm3/1 7 μf - VL Fm/1C 31. μf - VL Fm/1 μf - VL Fm/1C 7 μf - VL Fm/1C 7 μf - VL ELECTRIC MOTOR Fm: single-phase 3 V - Hz with thermal overload protector incorporated into the winding (up to 1. kw) F: three-phase 3/ V - Hz up to kw /9 V - Hz from. to 7 kw The three-phase pumps are fitted with high performance motors up to P=1.1kW in class IE and from P=1.kW in class IE3 (IEC 3-3) Insulation: class F Protection: IP a Single-phase version 1 3 b Three-phase version 1

26 SORPTION VOLTGE Single-phase 3 V V Fm 3/1C 11.. Fm 3/ Fm /1C. 7. Fm / Fm /1C Fm /1C VOLTGE Three-phase 3 V 1 V 9 7 V F 3/1C F 3/ F 3/ F 3/C F 3/ F 3/ 1.9. F 3/H F 3/H F 3/C F 3/ F 3/ F /1C F / F / F /1C F / F / F / F / F /C F / F / F /1C F / F / F /1C F / F / F /C F / F / 3.. F /R 1.. VOLTGE Three-phase 3 V 1 V 9 7 V F /D F /C F / F / F /R 1.. F /1C F / F / F /1C F / F / F / F / F /R F /C F /. 3. F / 79.. F /1D. 13. F /1C F /1 3.. F / F / F /. 3. F / 79.. F / F /1C-N F /1-N F /1-N.. F /C F /. 3. F / 79.. F / F /

27 F DIMENSIONS ND WEIGHT a DN f n h1 DN1 h h w1 w n1 n s DIMENSIONS mm kg Single-phase Three-phase DN1 DN a f h h1 h n n1 n w1 w s 1~ 3~ Fm 3/1C F 3/1C Fm 3/1 F 3/1 / F 3/1 37. F 3/C F 3/. 1 F 3/ F 3/H. 9 F 3/H. F 3/C. F 3/ F 3/ Fm /1C F /1C Fm /1 F / F /1 33. Fm /1C F /1C / F / F /1 3. F / F /. F /C. F / F / Fm /1C F /1C / F / F / F /1C 9. F / F /1. F /C F / F / 1. F /R F /D 1.3 F /C 3.3 F / F / 13.3 F /R F /1C F / F / F /1C F / F / F / F / F /R F /1D F /1C F / F / F /1C-N F /1-N F /1-N

28 DIMENSIONS ND WEIGHT f a DN n h1 DN1 h h3 h w m s n1 n DIMENSIONS mm kg Three-phase DN1 DN a f h h1 h h3 n n1 n w m s 3~ F /C F / F / F / F / 7 1. F / F / F /C.3 F / F / F / F / 39.3 FLNGED PORTS COUNTER FLNGES (CN E ORDERED SEPRTELY) DN K D F K D DN FLNGES D K HOLES mm mm mm N. Ø (mm) DN FLNGES F D K HOLES mm COUNTER FLNGES mm mm N. Ø (mm) 3 1¼ 1 1½ ½

K DOUBLE-IMPELLER DOUBLE-IMPELLER ELECTRIC PUMPS

K DOUBLE-IMPELLER DOUBLE-IMPELLER ELECTRIC PUMPS K DOUBLE-IMPELLER DOUBLE-IMPELLER ELECTRIC PUMPS ENERGY EFFICIENCY 7.5 TECHNICL DT Operating range: from,2 to 3 m 3 /h with head up to 97 metres. Pumped liquid: clean, free of solids and abrasives, non-viscous,

More information

DOMESTIC HOT WATER PUMPS WITH FIXED-SPEED MOTOR, 3x400V AP-, AKP- and AEP- series, threaded G1/2 G1 ¼ LOREM IPSUM JE ZULT MAAR 60 HZ.

DOMESTIC HOT WATER PUMPS WITH FIXED-SPEED MOTOR, 3x400V AP-, AKP- and AEP- series, threaded G1/2 G1 ¼ LOREM IPSUM JE ZULT MAAR 60 HZ. LOREM IPSUM JE ZULT MAAR HZ m Head m/s m/s m/s m/s m/s Ø m Ø Ø Ø Ø l/s Flow kw Shaft power P Ø m/h Ø 9 Ø Ø kw 9 Total input power P Ø DOMESTIC HOT WATER PUMPS WITH FIXED-SPEED MOTOR, xv AP-, AKP- and AEP-

More information

TPH Series WALRUS PUMP. Multi-stage Centrifugal Pump. All specifications are subject to change without notice. 014

TPH Series WALRUS PUMP. Multi-stage Centrifugal Pump. All specifications are subject to change without notice. 014 T Series WLRUS PUMP ll specifications are subject to change without notice. Multistage entrifugal Pump T T pplications The WLRUS T Series is horizontal multistage centrifugal pump, suitable for clean water/liquid

More information

TPH. 60Hz. Standard mode TPH 4T 2K. Code TPH 4T 2K S F A H

TPH. 60Hz. Standard mode TPH 4T 2K. Code TPH 4T 2K S F A H C US NSF/ANSI TPH Applications: The TPH Series are modernly designed with quiet and high efficient operation pumps, suitable for dependable water transfer, circulating or booster service. -Industrial circulation

More information

CMA - B - C - D - CMR

CMA - B - C - D - CMR Cast iron self-priming electric pumps. APPLICATIONS Pressure boosting domestic plants Small-scale irrigation Moving non-aggressive liquids for civil and industrial use Washing plants Washing vehicles CMA-B-C-D

More information

MULTISTAGE CENTRIFUGAL PUMP TPH 2/4/8/12/25/50T. 50Hz. WALRUS PUMP ISO 9001 Certified

MULTISTAGE CENTRIFUGAL PUMP TPH 2/4/8/12/25/50T. 50Hz. WALRUS PUMP ISO 9001 Certified MULTISTAGE CENTRIFUGAL PUMP TPH /////T Hz WALRUS PUMP ISO Certified TPH Applications The WALRUS TPH Series is horizontal multistage centrifugal pump, suitable for clean water/liquid without abrasive matters.

More information

SINGLE IMPELLER CENTRIFUGAL ELECTRIC PUMPS in cast iron

SINGLE IMPELLER CENTRIFUGAL ELECTRIC PUMPS in cast iron Cast iron self-priming electric pumps. APPLICATIONS Pressure boosting domestic plants Small-scale irrigation Moving non-aggressive liquids for civil and industrial use Washing plants Washing vehicles CMA-B-C-D

More information

NM, NMD 60 Hz NM, NMD. Close Coupled Centrifugal Pumps with threaded ports

NM, NMD 60 Hz NM, NMD. Close Coupled Centrifugal Pumps with threaded ports , D z Close Coupled Centrifugal ups Construction Close-coupled, centrifugal pups; electric otor with extended sha directly connected to the pup. : single-ipeller D: with two back-to-back ipellers (with

More information

TPH Series 50Hz Multi-stage Centrifugal Pump

TPH Series 50Hz Multi-stage Centrifugal Pump WLRUS PUMP T Series Hz Multistage Centrifugal Pump ll specifications are subject to change without notice. 9 T Product data pplications Page Standard mode Page Operation conditions Page Pump construction

More information

Contents. Identification LHC. Horizontal split case pumps. Type key. Identification Type key

Contents. Identification LHC. Horizontal split case pumps. Type key. Identification Type key Contents dentification Type key Product data ntroduction Applications Features and benefits Performance range pole pole pole Construction Sectional drawing Construction features Test pressure Operating

More information

EVOTRON WET ROTOR ELECTRONIC CIRCULATORS TECHNICAL DATA APPLICATIONS ADVANTAGES

EVOTRON WET ROTOR ELECTRONIC CIRCULATORS TECHNICAL DATA APPLICATIONS ADVANTAGES TECNICAL DATA EVOTRON Operating range: from, -, m3/h with head of up to metres. Pumped liquid temperature range: from - C to + C. Working pressure: bar ( kpa). Protection class: IP X. Insulation class:

More information

Contents. Performance Curves/Technical Data. General Data Performance Range Sectional Drawing TPH 2T TPH 4T TPH 8T TPH 12T TPH 25T TPH 50T

Contents. Performance Curves/Technical Data. General Data Performance Range Sectional Drawing TPH 2T TPH 4T TPH 8T TPH 12T TPH 25T TPH 50T Contents General Data Performance Range Sectional Drawing Performance Curves/Technical Data T T T T T 8T T T T T T T 7 9 T Series Multistage Centrifugal Pump Hz Power:.. kw Head: Up to 7M Flow: Up to L/min

More information

IL series. Centrifugal marine IN-LINE pumps

IL series. Centrifugal marine IN-LINE pumps IL series Centrifugal marine IN-LINE pumps DESCRIPTION Vertically built centrifugal IN-LINE pumps are made with standardized DIN-22 parts, with in-line suction and discharge flanges. This arrangement requires

More information

60 Hz. e-nsc Series HORIZONTAL CENTRIFUGAL ELECTRIC PUMPS EQUIPPED WITH IE3 MOTORS

60 Hz. e-nsc Series HORIZONTAL CENTRIFUGAL ELECTRIC PUMPS EQUIPPED WITH IE3 MOTORS 6 Hz e-nsc Series HORIZONTAL CENTRIFUGAL ELECTRIC PUMPS EQUIPPED WITH IE3 MOTORS Cod. 19112831 Rev. B Ed.7/217 Xylect TM Xylect TM is a pump solution software with an extensive online database of product

More information

GRUNDFOS DATA BOOKLET MAGNA, UPE. Series 2000 circulator pumps

GRUNDFOS DATA BOOKLET MAGNA, UPE. Series 2000 circulator pumps GRUNDFOS DATA BOOKLET MAGNA, UPE Series circulator pumps Contents Product data MAGNA and UPE 3 Duty range 3 Characteristic features 3 Benefits 3 Applications 3 eating systems 3 Pumped liquids Type key

More information

Calio-Therm NC Type Series Booklet

Calio-Therm NC Type Series Booklet High-efficiency Drinking Water Pump Type Series Booklet Legal information/copyright Type Series Booklet All rights reserved. The contents provided herein must neither be distributed, copied, reproduced,

More information

P U M P S. The quality standard for hydraulic efficiency and suction lift. PERIPHERAL PUMPS TEP/ TSP - SERIES 50Hz

P U M P S. The quality standard for hydraulic efficiency and suction lift. PERIPHERAL PUMPS TEP/ TSP - SERIES 50Hz P U M P S THE BENCHMARK FOR PERFORMANCE The quality standard for hydraulic efficiency and suction lift. PERIPHERAL PUMPS TEP/ TSP - SERIES 5Hz I N D E X TEP / TSP SERIES - PERIPHERAL PUMPS Page No. General

More information

P U M P S. The quality standard for hydraulic efficiency and suction lift. PERIPHERAL PUMPS TEP/ TSP - SERIES 50Hz

P U M P S. The quality standard for hydraulic efficiency and suction lift. PERIPHERAL PUMPS TEP/ TSP - SERIES 50Hz P U M P S THE BENCHMARK FOR PERFORMANCE The quality standard for hydraulic efficiency and suction lift. PERIPHERAL PUMPS TEP/ TSP - SERIES 5Hz I N D E X TEP / TSP / TRP SERIES - PERIPHERAL PUMPS Page

More information

CME / CM-GE / DCME IN-LINE CONSTANT PRESSURE PUMPS. TECHNICAL DATA - CME/CM-GE single flanged

CME / CM-GE / DCME IN-LINE CONSTANT PRESSURE PUMPS. TECHNICAL DATA - CME/CM-GE single flanged CIRCUTORS ND IN-INE UMS ENERGY EFFICIENCY Circulation pups with in-line ports, suitable for installation in heating and air conditioning, refrigeration, and doestic hot water systes. Extreely versatile

More information

DEBEM IM VERTICAL CENTRIFUGAL PUMPS.

DEBEM IM VERTICAL CENTRIFUGAL PUMPS. IM VERTICA CENTRIFUGA PUMPS The IM series of resin-encased vertical centrifugal pumps features high-performance pumps for fixed installations with pump immersed directly in the tank and operated by a directdrive

More information

GRUNDFOS DATA BOOKLET MAGNA, UPE. Series 2000 circulator pumps

GRUNDFOS DATA BOOKLET MAGNA, UPE. Series 2000 circulator pumps GRUNDFOS DATA BOOKLET Series circulator pumps Contents Product data MAGNA and UPE 3 Duty range 3 Characteristic features 3 Benefits 3 Applications 3 eating systems 3 Pumped liquids Type key 5 Performance

More information

barmesapumps.com SELF-PRIMING CENTRIFUGAL TRASH PUMP SPECIFICATIONS Series: SH8-U Suction: 8" Discharge: 8" Spherical solids handling: 3"

barmesapumps.com SELF-PRIMING CENTRIFUGAL TRASH PUMP SPECIFICATIONS Series: SH8-U Suction: 8 Discharge: 8 Spherical solids handling: 3 SELF-PRIMING CENTRIFUGAL TRASH PUMP Series: SH-U Suction: " Discharge: " Spherical solids handling: 3" SIZE BEARING - PUMP END " x " NPT, lbs., female flange. Open single ball, radial load. LIQUID TEMPERATURE

More information

NKVE VERTICAL AXIS MULTISTAGE CENTRIFUGAL PUMPS WITH MCE/P INVERTER

NKVE VERTICAL AXIS MULTISTAGE CENTRIFUGAL PUMPS WITH MCE/P INVERTER NKVE 1-1--3--6-9 VERTICAL AIS MULTISTAGE CENTRIFUGAL PUMPS WIT MCE/P INVERTER TECNICAL DATA Operating range: fro to 118 3 /h with head up to 31 etres. Puped liquid: clean, free of solids and abrasives,

More information

LES. Single-stage end-suction pumps Identification Type key

LES. Single-stage end-suction pumps Identification Type key Contents Singlestage endsuction pumps Identification Type key Product data Introduction Applications Features and benefits Performance range pole pole 6 pole Construction Sectional drawing Construction

More information

GRUNDFOS DATA BOOKLET MAGNA, UPE. Series 2000 circulator pumps

GRUNDFOS DATA BOOKLET MAGNA, UPE. Series 2000 circulator pumps GRUNDFOS DATA BOOKLET Series circulator pumps Contents Product data MAGNA and UPE 3 Duty range 3 Characteristic features 3 Benefits 3 Applications 3 eating systems 3 Pumped liquids 3 Type key Performance

More information

Prima range. Alifter range. magnetical driven pumps in thermoplastic materials TMP TMA. centrifugal. self-priming

Prima range. Alifter range. magnetical driven pumps in thermoplastic materials TMP TMA. centrifugal. self-priming Prima range TMP centrifugal Alifter range magnetical driven pumps in thermoplastic materials TMA self-priming Prima - Alifter In this catalog Argal proposes the range of PRIMA pumps, magnetical driven,

More information

KLME - KLPE / DKLME - DKLPE IN-LINE CONSTANT PRESSURE PUMPS

KLME - KLPE / DKLME - DKLPE IN-LINE CONSTANT PRESSURE PUMPS KLME - KLE / DKLME - DKLE IN-LINE CONSTNT RESSURE UMS CIRCULTORS ND IN-LINE UMS ENERGY EFFICIENCY ETING, IR CONDITIONING SYSTEMS, SOLR NEL ND OT TER SYSTEMS Circulator for hot or cold water with in-line

More information

High-efficiency Circulator Pump. Rio-Eco N / Rio-Eco Z N. Type Series Booklet

High-efficiency Circulator Pump. Rio-Eco N / Rio-Eco Z N. Type Series Booklet High-efficiency Circulator Pump Rio-Eco N / Rio-Eco Z N Type Series Booklet Legal information/copyright Type Series Booklet Rio-Eco N / Rio-Eco Z N KSB Aktiengesellschaft All rights reserved. The contents

More information

ELECTRONIC WET ROTOR CIRCULATORS

ELECTRONIC WET ROTOR CIRCULATORS ELECTRONIC WET ROTOR CIRCULTORS Technical Sheet ELECTRONIC CIRCULTORS FOR ETING ND IR CONDITIONING SYSTEMS Energ ia e y GENERL DT compliant with the 3 and european directive ErP 9//EC (ex EuP) pplications

More information

PR CYCLONE SECONDARY SHUTOFF

PR CYCLONE SECONDARY SHUTOFF EN PR CYCLONE SECONDARY SHUTOFF ORIGINAL INSTRUCTIONS CYCLONE SECONDARY SHUTOFF PR530 CYCLONE SECONDARY SHUTOFF PR330 CYCLONE SECONDARY SHUTOFF PR200-250 CYCLONE SECONDARY SHUTOFF PR150 TECHNICAL DATA

More information

PRESSURE GAUGE SELECTORS

PRESSURE GAUGE SELECTORS PRESSURE GUGE SELECORS Gauge isolator valves are designed to protect pressure gauges from pressure shocks when the pressure reading is not required; after each reading setting the selector to the closed

More information

UNI EN ISO 9001:2008 UNI EN ISO 14001:2004 BS OHSAS 18001:2007 EC DIRECTIVE 2014/34/EU (ATEX) CERTIFIED MANAGEMENT SYSTEM

UNI EN ISO 9001:2008 UNI EN ISO 14001:2004 BS OHSAS 18001:2007 EC DIRECTIVE 2014/34/EU (ATEX) CERTIFIED MANAGEMENT SYSTEM EN ISM-BSM CERTIFIED Technology Made in Italy Since 1955 the Varvel Group has been making speed reducers and variators for light industry applications. Reliable partner in power transmission equipment

More information

ISO-C Series chemical Pump

ISO-C Series chemical Pump Structural drawing FEATURES ISO-C series chemical process pump, this product carried out the standard o GB/T perormance and dimension o axial suction centriugal pump (bar) ISO-C series pump take in appearance

More information

Single Phase Motors Technical Datasheets

Single Phase Motors Technical Datasheets Single Phase Motors Technical Datasheets EN A dynamic, strong and ambitious Group: Orange1 Holding is an international renown Group, one of the most important European manufacturers of single-phase and

More information

GRUNDFOS DATA BOOKLET MAGNA, UPE. Series 2000 circulator pumps

GRUNDFOS DATA BOOKLET MAGNA, UPE. Series 2000 circulator pumps GRUNDFOS DATA BOOKLET MAGNA, UPE Series circulator pumps Contents Product data MAGNA/UPE 3 Duty range 3 Characteristic features 3 Benefits 3 Applications 3 eating systems 3 Pumped liquids 3 Type key Performance

More information

Standardized Chemical Pumps. Fields of Application. Designation. Design. Operating Data. Type Series Booklet /7-10 G2 CPK-H

Standardized Chemical Pumps. Fields of Application. Designation. Design. Operating Data. Type Series Booklet /7-10 G2 CPK-H Type Series Booklet.5/7-0 G CPK-H Standardized Chemical Pumps to EN 5/ISO 5/ISO 599, heatable Automation products available: Hya-Drive Hyamaster hyatronic Fields of Application CPK-H pumps are used for

More information

Single Phase Motors Technical Datasheets

Single Phase Motors Technical Datasheets Single Phase Motors Technical Datasheets EN A dynamic, strong and ambitious Group: Orange1 Holding is an international renown Group, one of the most important European manufacturers of single-phase and

More information

JETINOX SELF-PRIMING CENTRIFUGAL ELECTRIC PUMPS

JETINOX SELF-PRIMING CENTRIFUGAL ELECTRIC PUMPS JETINOX SELF-RIMIN ENTRIFUL ELETRI UMS TENIL DT Operating range: fro. to 1. /h with head up to etres. Liquid quality requireents: clean, free fro solid or abrasive containants, non-viscous, non-aggressive,

More information

ELECTRONIC WET ROTOR CIRCULATORS

ELECTRONIC WET ROTOR CIRCULATORS ELECTRONIC WET ROTOR CIRCULATORS TECNICAL DATA EVOTRON WET ROTOR ELECTRONIC CIRCULATORS Operating range: from, -, m/h with head of up to metres. Pumped liquid temperature range: from -1 C to +11 C. Working

More information

SERIES FMP. Working pressure. 280 bar. Style D Style V Style Z. Style T. Style B. Style S B B D.I. D.I. D.I. D.I. D.I. D.I.

SERIES FMP. Working pressure. 280 bar. Style D Style V Style Z. Style T. Style B. Style S B B D.I. D.I. D.I. D.I. D.I. D.I. 6 FMP SERIES FMP Working pressure 80 bar Style S Style Style T Style D Style V Style Z 7 Technical data Filter body (Materials) ead: Cast iron (chemical heat treatment) ousing: Cast iron (chemical heat

More information

The FLUX F 430 with mechanical seal

The FLUX F 430 with mechanical seal The FLUX F 0 with mechanical seal Flexible coupling between motor and pump The pump must be used with many varying liquids, consequently the smallest residual left within the pump is unacceptable. You

More information

Working pressure. 420 bar. Style T. Style B. Style D Style V Style Z. Style S B B D.I. D.I. D.I. D.I. D.I. D.I.

Working pressure. 420 bar. Style T. Style B. Style D Style V Style Z. Style S B B D.I. D.I. D.I. D.I. D.I. D.I. 5 FP SRIS FP Working pressure 40 bar Style S Style Style T Style D Style V Style Z 5 Technical data Filter body (Materials) ead: Cast iron (chemical heat treatment) ousing: Steel (chemical heat treatment)

More information

PiB Series. PiB (Pump-in-a-Box) 4380 & 4392 Series

PiB Series. PiB (Pump-in-a-Box) 4380 & 4392 Series PiB Series PiB (Pump-in-a-Box) & 9 Series FILE NO: - DATE: July SUPERSEDES: - DATE: January 09 PiB Series Guaranteed In Stock At The Right Price! The PiB series builds on the high quality and unsurpassed

More information

CALEFFI. Modulating digital controller for heating and cooling. 161 series 01122/08 GB. replaces dp 01122/05

CALEFFI. Modulating digital controller for heating and cooling. 161 series 01122/08 GB. replaces dp 01122/05 Modulating digital controller for heating and cooling series REGI ERED SI EN ISO 00:000 Cert. n FM UNI EN ISO 00:000 Cert. n 000 0/0 G replaces dp 0/0 Function The controller can be used with three-point

More information

ALUMINIUM CENTRIFUGAL FANS. 4 x M6 x OUTLET x M6 x 20

ALUMINIUM CENTRIFUGAL FANS. 4 x M6 x OUTLET x M6 x 20 DESCRIPTION Dutair LK-series industrial ventilators consist of a robust body made from die-cast aluminium alloy. Impellers are made of extruded aluminium. The asynchronous electric motors are maintenance

More information

ALUMINIUM CENTRIFUGAL FANS x M6 x x M6 x 16

ALUMINIUM CENTRIFUGAL FANS x M6 x x M6 x 16 LK4 DESCRIPTION Dutair LK-series industrial ventilators consist of a robust body made from die-cast aluminium alloy. Impellers are made of extruded aluminium. The asynchronous electric motors are maintenance

More information

FMP :41 Pagina 5 (1,1) FMP

FMP :41 Pagina 5 (1,1) FMP FMP 6-07-006 9:4 Pagina 5 (,) FMP 6 FMP 6-07-006 9:4 Pagina 5 (,) SERIES FMP Working pressure 80 bar Style S Style Style T Style D Style V Style Z 7 FMP 6-07-006 9:4 Pagina 7 (,) Technical data Filter

More information

50 Hz. e-lne Series SINGLE IN-LINE ELECTRIC PUMPS EQUIPPED WITH IE3 MOTORS. ErP 2009/125/EC

50 Hz. e-lne Series SINGLE IN-LINE ELECTRIC PUMPS EQUIPPED WITH IE3 MOTORS. ErP 2009/125/EC Hz e-lne Series SINGLE IN-LINE ELECTRIC PUMPS EQUIPPED WITH IE3 MOTORS ErP 9/1/EC Cod. 191731 Rev. F Ed.3/16 Xylect TM Xylect TM is a pump solution software with an extensive online database of product

More information

Tangential Fans Series TW Impeller diameter 150 mm and 200 mm

Tangential Fans Series TW Impeller diameter 150 mm and 200 mm Tangential Fans Series TW Impeller diameter mm and 0 mm 105 Corporate Drive, Suite E Spartanburg, SC 293 PO Box 2889, Spartanburg, SC 294 USA Tel: 864-599-63 Fax: 864-599-6344 e-mail: info@ltg-inc.net

More information

e-mp Series MPA, MPR, MPD, MPV Lenntech 50 Hz Tel Fax

e-mp Series MPA, MPR, MPD, MPV Lenntech 50 Hz Tel Fax Hz e-mp Series MPA, MPR, MPD, MPV HIGH PRESSURE MULTISTAGE PUMPS ACCORDING TO ISO 199 Lenntech info@lenntech.com Tel. +31-1-1-9 www.lenntech.com Fax. +31-1-1-9 Cod. 1911 Rev. A Ed.3/17 Xylect TM Xylect

More information

AC axial compact fan

AC axial compact fan ebm-papst Mulfingen GmbH & Co. KG Bachmühle D-7467 Mulfingen Phone +49 798 8-0 Fax +49 798 8-0 info@de.ebmpapst.com www.ebmpapst.com Limited partnership Headquarters Mulfingen County court Stuttgart HRA

More information

JET SELF-PRIMING CENTRIFUGAL PUMPS DIMENSIONS AND WEIGHTS JET JET

JET SELF-PRIMING CENTRIFUGAL PUMPS DIMENSIONS AND WEIGHTS JET JET JET SELFRIMING CENTRIFUGL UMS JET M JET T JET M JET T JET M JET T JET M JET T JET M JET T JET M JET T JET M JET T JET M JET T JET M JET T JET M JET T VOLTGE z x V~ x V~ x V~ x V~ x V~ x V~ x V~ x V~ x

More information

Application PN 16 / 40 DN Product features. Compact overall height Body shape gives optimum flow characteristic

Application PN 16 / 40 DN Product features. Compact overall height Body shape gives optimum flow characteristic pplication Control of gases, vapours and liquids. The modular concept of valve, multi spring actuator and digital FOXBORO/Eckardt positioner Type SRD 992 facililates trouble free expansion to allow for

More information

DNM, DNP. Single-Stage End-Suction Pumps

DNM, DNP. Single-Stage End-Suction Pumps DNM, DNP ingle-tge End-uction Pums A wide rnge of comct nd directly couled end-suction ums designed for circultion of cold nd hot liquids in oen nd closed systems. TM 9 99 Contents Generl dt Performnce

More information

AT SERIES OFF CIRCUIT TAP CHANGERS

AT SERIES OFF CIRCUIT TAP CHANGERS T SERIES OFF CIRCUIT TP CHNGERS THE CHOICE COE S.P.. PUTS ON THE RKET THE NEW T SERIES OFF CIRCUIT TP CHNGERS. T COE: THE CHOICE Comem S.p.. makes use of four main characteristics in order to be successful

More information

Polígono Indutrial O Rebullón s/n Mos - España -

Polígono Indutrial O Rebullón s/n Mos - España - FP 5 Polígono Indutrial O Rebullón s/n. 646 - Mos - spaña - rodavigo@rodavigo.com SRIS FP Working pressure 40 bar Style S Style Style T Style D Style V Style Z 5 Polígono Indutrial O Rebullón s/n. 646

More information

ALUMINIUM CENTRIFUGAL FANS. 4 x M6 x 16

ALUMINIUM CENTRIFUGAL FANS. 4 x M6 x 16 DESCRIPTION Dutair BCT-series aluminium centrifugal fans with open die-cast aluminium impellers and forward curved blades are suitable for material transport and high pressure applications. The asynchronous

More information

ALUMINIUM CENTRIFUGAL FANS M20 4 x M5 x 10 INLET. 4 x M5 x 12

ALUMINIUM CENTRIFUGAL FANS M20 4 x M5 x 10 INLET. 4 x M5 x 12 BCT61 DESCRIPTION Dutair BCT-series aluminium centrifugal fans with open die-cast aluminium impellers and forward curved blades are suitable for material transport and high pressure applications. The asynchronous

More information

FMM 050 uk :26 Pagina 5 (1,1) FMM 050

FMM 050 uk :26 Pagina 5 (1,1) FMM 050 uk 6-07-006 9:6 Pagina 5 (,) 30 uk 6-07-006 9:6 Pagina 5 (3,) SRIS Working pressure 80 bar Style S Style Style T Style D 3 uk 6-07-006 9:6 Pagina 7 (,) Technical data Filter body ( M a t e r i a l s )

More information

Digital AC Motors MHD

Digital AC Motors MHD Digital AC Motors MHD090 8-1 8 MHD090 8.1 Technical Data Description Symbol Unit MHD090B-035 Type of cooling Natural Natural Surface Liquid Motor overtemperature 60 K 100 K 60 K/100 K 60 K/100 K Electric

More information

Working pressure. 320 bar. Style T. Style D. Style S. Style B B B D.I. D.I. D.I. D.I.

Working pressure. 320 bar. Style T. Style D. Style S. Style B B B D.I. D.I. D.I. D.I. 8 FB SERIES FB Working pressure 0 bar Style S Style B Style T Style D B B B B D.I. D.I. D.I. D.I. A A A A 8 Technical data Filter body (Materials) ead: Cast iron (chemical heat treatment) ousing: Steel

More information

THE ANSWER TO PROBLEMS OF: CORROSION, ABRASION, GRANULATED MATERIALS, POWDERS, SLUDGE, GAS ETC.

THE ANSWER TO PROBLEMS OF: CORROSION, ABRASION, GRANULATED MATERIALS, POWDERS, SLUDGE, GAS ETC. P PINC VLVE Mod. S pag. Mod. S pag. Mod. S pag. Mod. SD pag. Mod. S pag. Mod. S pag. 0 Mod. S pag. Mod. S pag. Mod. S pag. Mod. S0 pag. Mod. S pag. 0 Mod. S pag. Mod. S pag. Mod. S pag. Mod. S pag. TE

More information

e-sh Series Lenntech 60 Hz Tel Fax

e-sh Series Lenntech 60 Hz Tel Fax Hz e-sh Series HORIZONTAL CENTRIFUGAL ELECTRIC PUMPS ACCORDING TO EN 733 MADE IN AISI 31 STAINLESS STEEL AND EQUIPPED WITH IE3 MOTORS Lenntech info@lenntech.com Tel. +31-1-1-9 www.lenntech.com Fax. +31-1-1-89

More information

JET GENERAL DATA JET JET JET DAB PUMPS reserve the right to make modifications without prior notice

JET GENERAL DATA JET JET JET DAB PUMPS reserve the right to make modifications without prior notice JT JT - JT ----- JT - NRL DT pplications Self-priing centrifugal pup with excellent suction capacity even when there are air bubbles and sall particles of sand in the water. Used especially for supplying

More information

e-lnt Series Lenntech ErP 2009/125/EC 50 Hz Tel Fax

e-lnt Series Lenntech ErP 2009/125/EC 50 Hz Tel Fax Hz e-lnt Series TWIN IN-LINE ELECTRIC PUMPS EQUIPPED WITH IE3 MOTORS Lenntech info@lenntech.com Tel. +31-1-61-9 www.lenntech.com Fax. +31-1-616-89 ErP 9/1/EC Cod. 191731 Rev. C Ed./16 Xylect TM Xylect

More information

SVH with HYDROVAR (HVL range)

SVH with HYDROVAR (HVL range) SVH with HYDROVAR (HVL range) SVH-HVL Rev. B Ed.9/1 (EN) SVH SERIES (e-sv WITH HYDROVAR) Background and context For all pumping needs in commercial or residential building and in industry applications,

More information

Metal oil filler and air breather filler caps. Bayonet connection. Reservoir holes. TA46 B (Materials)

Metal oil filler and air breather filler caps. Bayonet connection. Reservoir holes. TA46 B (Materials) Metal oil filler and air Series T 46 4 5 6 4 ayonet connection Ø 46 7 8 46 Reservoir holes T46 (Materials) M5 - Cover: Chrome Plated Steel - Filter element: Impregnated paper Polyurethane 64-6 - Flange:

More information

ELMO-G Vacuum Pumps/Compressors, Range 2BH1, Three-Phase 50 Hz

ELMO-G Vacuum Pumps/Compressors, Range 2BH1, Three-Phase 50 Hz ELMO- Vacuum Pumps/Compressors, Range 2BH1, Three-Phase 50 Hz Selection diagram vacuum operation Selection diagram compressor operation The performance curves are valid for pumping air at 15 C at the inlet

More information

AC axial compact fan

AC axial compact fan ebm-papst Mulfingen GmbH & Co. KG Bachmühle D-767 Mulfingen Phone +9 798 8- Fax +9 798 8- info@de.ebmpapst.com www.ebmpapst.com Limited partnership Headquarters Mulfingen County court Stuttgart HRA 59

More information

Variable Displacement Plug-In Motor A6VE. Series 6, for open and closed circuits Axial tapered piston, bent axis design

Variable Displacement Plug-In Motor A6VE. Series 6, for open and closed circuits Axial tapered piston, bent axis design rueninghaus Hydromatik Series 6, for open and closed circuits xial tapered piston, bent axis design Size 28...20 Nom. pressure up to 400 bar Peak pressure up to 40 bar RE 9606/0.97 RE 9606/0.97 replaces

More information

50/60 Hz. ecocirc XL and XLplus. high efficiency WET ROTOR circulators. ErP 2009/125/EC

50/60 Hz. ecocirc XL and XLplus. high efficiency WET ROTOR circulators. ErP 2009/125/EC / Hz ecocirc XL and XLplus high efficiency WET ROTOR circulators FOR COMMERCIAL HEATING AND COOLING applications ErP 9/1/EC Cod. 1971 Rev. C Ed.11/1 Lowara, ecocirc, Xylect are trademarks of Xylem Inc.

More information

High Pressure fi lters. FHB series. Maximum working pressure up to 32 MPa (320 bar) - Flow rate up to 485 l/min

High Pressure fi lters. FHB series. Maximum working pressure up to 32 MPa (320 bar) - Flow rate up to 485 l/min High Pressure fi lters FHB series Maximum working pressure up to MPa (0 bar) - Flow rate up to 8 l/min High Pressure fi lters Introduction FILTER SIZING INDEX CALCULATION CORRECTIVE FACTOR Page Introduction

More information

DBS315 1-phase SIDE CHANNEL BLOWERS

DBS315 1-phase SIDE CHANNEL BLOWERS DBS15/ 1-phase DESCRIPTION Dutair blowers for pressure and vacuum are compact machines consisting of an electric motor with a built-on pump housing. The rotational speed of the impeller creates a high

More information

Cat. No. 140M-F M-D8E-B

Cat. No. 140M-F M-D8E-B Bulletin 0M Motor Protection Circuit Breakers Product Selection Motor Protection Circuit Breakers Short Circuit Protection Standard Magnetic Trip ( x I e ) Motor Overload Protection Trip Class Rated Operational

More information

ELECTRONIC CIRCULATORS FOR HEATING AND COOLING SYSTEMS. ErP. eady

ELECTRONIC CIRCULATORS FOR HEATING AND COOLING SYSTEMS. ErP. eady ELECTRONIC CIRCULATORS OR EATING AND COOLING SYSTEMS ErP eady TECNICAL DATA EVOSTA 2 WET ROTOR ELECTRONIC CIRCULATORS Operating range:,-3,6 m 3 /h with head up to 6,9 metres. Pumped liquid temperature

More information

Polígono Indutrial O Rebullón s/n Mos - España -

Polígono Indutrial O Rebullón s/n Mos - España - FB 8 Polígono Indutrial O Rebullón s/n. 646 - Mos - España - rodavigo@rodavigo.com SERIES FB Working pressure 0 bar Style S Style B Style T Style D B B B B D.I. D.I. D.I. D.I. A A A A 8 Polígono Indutrial

More information

AC axial fan. Limited partnership Headquarters Mulfingen Amtsgericht (court of registration) Stuttgart HRA

AC axial fan. Limited partnership Headquarters Mulfingen Amtsgericht (court of registration) Stuttgart HRA ebm-papst Mulfingen GmbH & Co. KG Bachmühle D-767 Mulfingen Phone +9 798 8-0 Fax +9 798 8-0 info@de.ebmpapst.com www.ebmpapst.com Limited partnership Headquarters Mulfingen Amtsgericht (court of registration)

More information

Chapter 3: Fundamentals of Mechanics and Heat. 1/11/00 Electromechanical Dynamics 1

Chapter 3: Fundamentals of Mechanics and Heat. 1/11/00 Electromechanical Dynamics 1 Chapter 3: Fundamentals of Mechanics and Heat 1/11/00 Electromechanical Dynamics 1 Force Linear acceleration of an object is proportional to the applied force: F = m a x(t) F = force acting on an object

More information

Chapter Four Hydraulic Machines

Chapter Four Hydraulic Machines Contents 1- Introduction. 2- Pumps. Chapter Four Hydraulic Machines (لفرع الميكانيك العام فقط ( Turbines. -3 4- Cavitation in hydraulic machines. 5- Examples. 6- Problems; sheet No. 4 (Pumps) 7- Problems;

More information

APPLICATION CONSTRUCTION

APPLICATION CONSTRUCTION Side Channel Pumps CEH... 8 CEH /... / with magnetic coupling TECHNICAL DATA Output: Delivery head: Speed: max. m³/h max. m (at rpm) max. 8 rpm Temperature: max. 8 C Casing pressure: PN / PN Shaft sealing:

More information

GRUNDFOS PRODUCT GUIDE. VersaFlo UP, UPS. Series 200 circulator pumps 60 Hz

GRUNDFOS PRODUCT GUIDE. VersaFlo UP, UPS. Series 200 circulator pumps 60 Hz GRUNDFOS PRODUCT GUIDE VersaFlo UP, UPS Series circulator pumps Hz Contents ission General data Terminal box modules Applications Pumped liquids Type key 5 Nameplate 5 Performance range UPS pumps UP pumps

More information

Direct-operated 2/2-way solenoid valves Type EV210B

Direct-operated 2/2-way solenoid valves Type EV210B Data sheet Direct-operated 2/2-way solenoid valves Type EV20B EV20B covers a wide range of direct-operated 2/2-way solenoid valves for universal use. EV20B is a very robust valve program with high performance

More information

0T 0TS S T TS T TS T TS 0T T T T T T 6T T TS 6T 6TS T TS 6T 6TS 6T 6TS 6T 6TS Frame.. 6. 6 6... 6.... B 6 6... A..... 0..0... 6.... 6.....06 6.66.. 6.0.....6 0... C 6..0 6. 6....... E.. D....... F 6............

More information

Thermal oil. Hot Water Pumps. Fields of Application

Thermal oil. Hot Water Pumps. Fields of Application Type Series ooklet 0.50 G3 Etanorm SY Thermal Oil / Hot Water Pumps Fields of pplication Etanorm SY pumps are used in heat transfer systems (DIN 75) or in hot water circulation systems. Operating Data

More information

Standardized Chemical Pumps to EN /ISO 2858/ISO 5199 sealless, with magnetic drive. Fields of Application. Designation. Design.

Standardized Chemical Pumps to EN /ISO 2858/ISO 5199 sealless, with magnetic drive. Fields of Application. Designation. Design. Type series booklet.5/- G2 Magnochem Standardized Chemical Pumps to EN 5/ISO 25/ISO 99 sealless, with magnetic drive Automation products available: PumpExpert Hyamaster hyatronic Fields of Application

More information

Direct-operated 2/2-way compact solenoid valves Type EV210A

Direct-operated 2/2-way compact solenoid valves Type EV210A Data sheet Direct-operated 2/2-way compact solenoid valves Type EV210A EV210A covers a wide range of small, directoperated 2/2-way solenoid valves for use in industrial machinery. The compact design together

More information

143 EEX gerotor pump unit. For use in oil circulation systems in gas- and dust-ex-atmospheres

143 EEX gerotor pump unit. For use in oil circulation systems in gas- and dust-ex-atmospheres 1 EEX gerotor pump unit For use in oil circulation systems in gas- and dust-ex-atmospheres Gerotor pump series 1 EEX The 1 EEX product series has been specifically designed for centralized lubrication

More information

Submersible Pump in Discharge Tube. Amacan P. 60 Hz. Type Series Booklet

Submersible Pump in Discharge Tube. Amacan P. 60 Hz. Type Series Booklet Amacan P Hz Type Series Booklet Legal information/copyright Type Series Booklet Amacan P All rights reserved. The contents provided herein must neither be distributed, copied, reproduced, edited or processed

More information

Description of operation...5. Installation...7. Choice and selection...8. SMB20, SMB30 Series Electric pump range and characteristics...

Description of operation...5. Installation...7. Choice and selection...8. SMB20, SMB30 Series Electric pump range and characteristics... SMB, SMB3 Series VARIABLE SPEED BOOSTER SETS WITH e-sm DRIVE VERTICAL MULTISTAGE ELECTRIC PUMPS SERIES e-sv SMART VERTICAL MULTISTAGE MONOLITHIC ELECTRIC PUMPS SERIES VM SMART HORIZONTAL MULTISTAGE ELECTRIC

More information

ZF Series Force Transducers

ZF Series Force Transducers Data Sheet Series Force Transducers FEATURES 1 kn to 00 kn High accuracy For tensile or pressure forces Made of stainless steel Enclosure protection IP 67 DESCRIPTION The force transducers of the series

More information

VISUAL LEVEL INDICATORS

VISUAL LEVEL INDICATORS VIUL LEVEL INDICTOR LV... The level indicators series is available for both static and mobile applications; the construction materials used make it possible to guarantee service with wide temperature variations

More information

DMP 331P. Industrial Pressure Transmitter. Process Connections With Flush Welded Stainless Steel Diaphragm

DMP 331P. Industrial Pressure Transmitter. Process Connections With Flush Welded Stainless Steel Diaphragm DMP P Industrial Pressure Transmitter Process Connections With Flush Welded Stainless Steel accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 % FSO Nominal pressure from 0... 00 mbar up

More information

Pneumatic Universal. Actuator MOTORIZED VALVES USE TECHNICAL FEATURES OF THE ACTUATOR. Data sheet

Pneumatic Universal. Actuator MOTORIZED VALVES USE TECHNICAL FEATURES OF THE ACTUATOR. Data sheet Data sheet. - 8 USE The motorized valve is specifically used for the interception and regulation of fluids in: systems using alternative energy industrial systems in general using hot and cold fluids automation

More information

Centrifugal Fans double inlet with direct drive backwardcurved true airfoil blades. Issue 1.4 September 2013

Centrifugal Fans double inlet with direct drive backwardcurved true airfoil blades. Issue 1.4 September 2013 Centrifugal Fans double inlet with direct drive backwardcurved true airfoil blades Issue 1.4 September 013 1 The overall picture will decide Complete systems by Nicotra ebhardt Depending on the model of

More information

G_Series. Gas Ring Blowers US Edition

G_Series. Gas Ring Blowers US Edition _Series as Ring Blowers US Edition History In May 2002 the Nash Engineering Company, USA, and elmo vacuum technology mbh, ermany, formerly a Siemens subsidiary, merged to create a global leader in vacuum

More information

Pumps type MP Motor pump combination for mounting into tanks for on/off service

Pumps type MP Motor pump combination for mounting into tanks for on/off service Pumps type MP Motor pump combination for mounting into tanks for on/off service For hydraulic power packs with tank suited for direct mounting of the valves, see D 700 H Pressure p max Delivery flow Q

More information

Turbine Meter TRZ 03 PRODUCT INFORMATION. Reliable Measurement of Gas

Turbine Meter TRZ 03 PRODUCT INFORMATION. Reliable Measurement of Gas Turbine Meter TRZ 0 PRODUCT INFORMATION Reliable Measurement of Gas TURBINE METER TRZ 0 Method of operation, Construction Method of operation The TRZ 0 turbine meter is a flow meter suitable for gas measurement

More information

Solenoid valves 2/2-way direct-operated type EV210A

Solenoid valves 2/2-way direct-operated type EV210A MAKING MODERN LIVING POSSIBLE Data sheet Solenoid valves 2/2-way direct-operated type EV210A EV210A covers a wide range of small, direct-operated 2/2-way solenoid valves for use in industrial machinery.

More information

e-nsc Series Lenntech ErP 2009/125/EC 50 Hz Tel Fax

e-nsc Series Lenntech ErP 2009/125/EC 50 Hz Tel Fax Hz e-nsc Series HORIZONTAL CENTRIFUGAL ELECTRIC PUMPS EQUIPPED WITH IE3 MOTORS ErP 9/1/EC Lenntech info@lenntech.com Tel. +31-1-61-9 www.lenntech.com Fax. +31-1-616-89 Cod. 19191 Rev. F Ed.3/16 Xylect

More information

Serie B2.1. Flanged ductile iron ball valve. made in. Application fields. Shut-off valves E U R O P E. 18

Serie B2.1. Flanged ductile iron ball valve. made in. Application fields. Shut-off valves E U R O P E. 18 erie B. Flanged ductile iron ball valve BRanDOni made in E U R O P E Application fields WATER CONdITIONING GA EATING INdUTRY FIRE FIGTING www.brandoni.it erie B. eries B. valves are shut-off ball valves

More information