NM, NMD 60 Hz NM, NMD. Close Coupled Centrifugal Pumps with threaded ports
|
|
|
- Magdalen Lloyd
- 5 years ago
- Views:
Transcription
1 , D z Close Coupled Centrifugal ups Construction Close-coupled, centrifugal pups; electric otor with extended sha directly connected to the pup. : single-ipeller D: with two back-to-back ipellers (with axial thrust balancing). Connections: threaded ports ISO / (S 779). The pups in bronze are supplied fully painted. pplications - For clean liquids without abrasives, which are, non-aggressive for the pup aterials ( solids content up to.%). - For water supply. - For heating, air-conditioning, cooling and circulation plants. - For civil and industrial applications. - For fire fighting applications. - For irrigation. Operating conditions Liquid teperature fro - C to +9 C. bient teperature up to C. Total suction li up to 7. Maxiu perissible working pressure up to bar ( bar for pups D /9; D /; D /). Continuous duty. Materials Coponents, D -, -D up casing Cast iron ronze Lantern bracket GJL EN G-Cu Sn EN 9 Ipeller rass - Cu Zn b UNI 7 7 Cast iron ronze GJL EN G-Cu Sn EN 9 Sha Cr steel ISI Cr Ni Mo steel Cr Ni steel ISI ISI, -, -, Mechanical seal Carbon - Ceraic - NR Motor -pole induction otor, z (n rp)., D: three-phase / V, / V. M, DM: single-phase V. With theral protector up to.. Insulation class F. rotection I. Classification schee IE for three-phase otors fro,7. Constructed in accordance with EN -; EN -. EN -, EN --. Special features on request - Other voltages. - rotection I. - Special echanical seal - igher or lower liquid or abient teperatures. - Motor suitable operation with frequency converter. Coverage chart n rp U.S. g.p.. Ip. g.p.. D / D /9 D / D / / D / / / / 7, D 9 7 /h 7 9 l/in 7 7..C
2 , D z Close Coupled Centrifugal ups erforance n rp /h l/in,,,9,,,, 7,, 9, 7,, /E- /S- /-/ /S-/ /-/ M /CE- /CE- M /E- /E- M /- /-/,7,,,,,7,,7,7,,,,,,,,, 7,,9,,, 9,, 7,,,, 9 9,,,,,,, 9 9,,,, 9,, 9,,, 7,,,7,,, 7,,,,,,, 9, 9,,, 9 7 * 9* *, * 9* * 7* 9* *,*,* *, *, * - -D D /h l/in,,,9,,,, 7,, 9, 7,, -D /-/ D /-/ -D /Z-/ D /Z-/ -D /-/ D /-/ -DM /E- DM /E- -D /E- D /E- -DM /E- DM /E- -D /E- D /E- - /E- /E- - /E- /E-,,,,7,7,,,,,,,7,,, 7 9, 77,,, 9,, 7, 9 7, 7 7 9,, 9, 7,, 7 9* 9 7, 9 7, 9 7 7*,*, 7, 9, * * - - D D /h l/in,,,, 7,, 9,,,, - /-/ /-/ - /-/ /-/ - /E- /E- - /E- /E- - /-/ /-/ - /-/ /-/ - /S-/ /S-/ -D /9C-/ D /9C-/ -D /9-/ D /9-/ -D /9-/ D /9-/,,7,7,,,,,,,,,,,, 9 9,,,,, 7 97,7,, 7,,, 7 9,, 7,, 9, 7 9 9,,, 9, 7, 7 9,, 9,,, 9,,,,, 79 7,,,, 9,, 7,,,,*,,9 7, * *, 9 7, 9, 7,* 7,,, 9,,,,,,,,,,, /h l/in, 7,, 9,,,,,9 7 /FE- /DE- /E- /SE- M /E- /E- /-/ /D-/ /C-/ /-/,,7,7,,,,,,,, 7,,, 9,, 9 7,,, 9,,,,,,,,, 7,,9 7,,, 9,,,, 7,,, 7 9,,,,,,,, 7, *,,,,, 7 9,7 * 9* * 9* 7,,
3 , D z Close Coupled Centrifugal ups erforance n rp -D D /h l/in, 9, 7,, 9,,,,,9 -D /D-/ -D /C-/ -D /-/ -D /-/ -D /D-/ -D /C-/ -D /-/ -D /-/ D /D-/ D /C-/ D /-/ D /-/ D /D-/ D /C-/ D / -/ D /-/,, 7, 7, 9,,,, 7, 7, 9,, , 9, 7, 7, 9, 79 7,, 9, 7 9,,, 9, 9, 9 * 99, 7 * 7* 9* 7, 9, 77,,, 7 7, 7,, 7,, 7, * * - /h l/in 7 7, /E- 7/E- - 7/GE- 7/GE- - 7/F-/ 7/F-/ - 7/D-/ 7/D-/,,,, 9, 9,,7,,,,, 7,7 7, 7,,, 7, 9,,,7,,*,,,*, * *, D Standard construction. -, -D ronze construction. Rated otor power output. Total head in. With single-phase otor = M - DM. Maxiu suction li -. * Tolerances according to UNI EN ISO 99:. Rated currents V ~ IN I/IN,7,,,,,,,,,7,,,7,,9,,,,,, V Δ / V Y V Δ / V Y IN IN IN I/IN,7,,7,,,,,,,,7,,9,,7,,,,,,7,,, 9,,,,, 7,, 7,7,,,, 7,, 7,,7 7,9,7 7, 7 9, 9, 9,,,7, I/IN Rated otor power output. D.O.L. starting current / Rated current 9
4 z Close Coupled Centrifugal ups Characteristic curves n rp U.S. g.p.. U.S. g.p.. Ip. g.p.. S Ø 9 Ø η % 9 7 Ip.g.p.. Ø /- 7. η % Ø /h... S..... /h /h /h U.S. g.p.. U.S. g.p.. Ip. g.p.. Ip. g.p.. S Ø /S η % ~ Ø 7 ~ ~ ~ Ø C ~ C ~ Ø Ø Ø 7 Ø 7 η % /h... S /h 7. /h C /h 7.
5 z Close Coupled Centrifugal ups Characteristic curves n rp U.S. g.p.. U.S. g.p.. Ip.g.p.. S Ø Ø η % D Ø F Ø Ip.g.p.. Ø ~ Ø ~ Ø η 7% 9 /h D F S 7 /h... ~ ~... /h /h U.S. g.p.. U.S. g.p.. 7 Ip.g.p.. 7 C D Ip. g.p.. D F 7 7, D % G 9, D %, /h D C /h D F G /h /h
6 z Close Coupled Centrifugal ups Characteristic curves n rp U.S. g.p.. U.S. g.p.. Ip.g.p.. Ip.g.p.. Ø 9 / Ø Ø / Ø, η 9% η % /h. /h /h 7.. /h U.S. g.p.. U.S. g.p.. Ip.g.p.. Ø Ø / S Ø 7 Ø Ø / η % /h 7. /h η(%) /h l/in S S /h 7. S
7 D z Close Coupled Centrifugal ups Characteristic curves n rp U.S. g.p.. U.S. g.p.. Ip.g.p.. Z / / /9 Ip.g.p.. D / D / D % / - ~ / - ~ 7/7 - ~ 7/7 - ~ D 9% /h.... Z..... /h 7. /h. ~ ~... /h 7.
8 D z Close Coupled Centrifugal ups Characteristic curves n rp U.S. g.p.. U.S. g.p Ip.g.p.. Ip.g.p.. / /, /7 / D 7% C / C / D,% D / D /9 D /, /h C /h 7. /h 9 /h 7. 9 D C U.S. g.p.. Ip.g.p.. 7/ / D / C / D / 7 D % /h C D /h 7.
9 z Close Coupled Centrifugal ups Diensions and weights M - DN a DN w fm.9.9 s l DN n n n l g b h h /E- /S- /-/ /S-/ /-/ /CE- /E- /-/ - /E- - /E- - /-/ - /-/ - /E- - /E- /-/ /-/ /S-/ - /-/ - /-/ - /S-/ /FE- /DE- /E- /SE- /E- /-/ /D-/ /C-/ /-/ - 7/E- - 7/GE- - 7/F-/ - 7/D-/ kg,7 9,,,, 9,9,7,,,, 9, 9,,,,7, kg, 9,,,,,9, 9,, 9,7,, 9,7,,,9,,, 9,,,,,,,,,, kg,,,,,7,7, 9,,,, - - /E-,E- - /-/,-/ - /E-,E- - /-/ - /-/,-S-/ - 7/GE-,E- - 7/F-/ - 7/D-/ /S-,E- /-/,S-/,-/ /E-,CE- /-/ /E-,E- /-/,-/ /E-,E- /-/ /-/,S-/ /SE-,E-,DE-,FE- /E- /-/ /D-/ /-/,C-/ 7/GE-,E- 7/F-/ 7/D-/ DN ISO G G G DN G G G G / G / G / G G / G G / G G / G G G / G G / G G / G / G / a 7 7 fm h 9 h 7 7 n 7 9 n n 7 7 b s 9, 9, l 77 7 l 9 w 7 7 7, , 7, 7, 7, 7, 7, , 9, 9, 9 9 9,, 9 9,, g
10 D z Close Coupled Centrifugal ups Diensions and weights D / D / D /9 fm 7 G 9 G 9 a DN l DN l G/ DN.9. s n n b g h h w n DM D -D kg kg kg DM D -D kg kg kg - D /-/ - D /Z-/ - D /-/,,,,, 7, - D /-/ - D /-/ - D /9C-/ - D /9-/ - D /9-/,9,7,,, 7,,7 9,7,, -D -D /E-,E- -D /9C-/ -D /9-/,-/ D D /E-,E- D /9C-/ D /9-/,-/ DN DN ISO G / G G / G a 97 fm 7 7 h h n n 9 n 7 9 b s 9, l l w g D / D / fm a l l DN DN h D kg -D kg DN w s.9.77 w b n n g h g* - D /D-/ - D /C-/ - D /-/ - D /-/ - D /D-/ - D /C-/ - D /-/ - D /-/, , , 77,, 7, -D -D /D-/ -D /-/,C-/ -D /-/ -D /D-/ -D /-/,C-/ -D /-/ D D /D-/ D /-/,C-/ D /-/ D /D-/ D /-/,C-/ D /-/ DN DN ISO G G / G G / a fm h 7 7 h n 9 9 n 9 9 w b s l l w g * * *
11 z Close Coupled Centrifugal ups Features.9. Copact Design The copact design allows for easy installtion even in confined spaces. Robustness The echanical structure of the hydraulic parts in contact with the puped liquid are diensioned to guarantee the axiu resistence to echanical stress. unique design The lantern bracket design prevents contact with the pups rotating parts, providing protection to the end user whilst allowing for inspection of the echanical seal. Reliability The bearing and sha are designed to ensure the reduction of the stress, providing high reliability under all operating conditions. 7
12 D z Close Coupled Centrifugal ups Features D.9. Flexibility The option to choose between cast iron and bronze aterias for the hydraulic parts in contact with the puped liquid allows D series pups to be selected for use with different types of liquids. Robustness The echanical structure of the hydraulic parts in contact with the puped liquid are diensioned to guarantee the axiu resistence to echanical stress. Reliability The bearing and sha are designed to ensure the reduction of the stress, providing high reliability under all operating conditions. 7
CME / CM-GE / DCME IN-LINE CONSTANT PRESSURE PUMPS. TECHNICAL DATA - CME/CM-GE single flanged
CIRCUTORS ND IN-INE UMS ENERGY EFFICIENCY Circulation pups with in-line ports, suitable for installation in heating and air conditioning, refrigeration, and doestic hot water systes. Extreely versatile
KLME - KLPE / DKLME - DKLPE IN-LINE CONSTANT PRESSURE PUMPS
KLME - KLE / DKLME - DKLE IN-LINE CONSTNT RESSURE UMS CIRCULTORS ND IN-LINE UMS ENERGY EFFICIENCY ETING, IR CONDITIONING SYSTEMS, SOLR NEL ND OT TER SYSTEMS Circulator for hot or cold water with in-line
NKVE VERTICAL AXIS MULTISTAGE CENTRIFUGAL PUMPS WITH MCE/P INVERTER
NKVE 1-1--3--6-9 VERTICAL AIS MULTISTAGE CENTRIFUGAL PUMPS WIT MCE/P INVERTER TECNICAL DATA Operating range: fro to 118 3 /h with head up to 31 etres. Puped liquid: clean, free of solids and abrasives,
JET SELF-PRIMING CENTRIFUGAL PUMPS DIMENSIONS AND WEIGHTS JET JET
JET SELFRIMING CENTRIFUGL UMS JET M JET T JET M JET T JET M JET T JET M JET T JET M JET T JET M JET T JET M JET T JET M JET T JET M JET T JET M JET T VOLTGE z x V~ x V~ x V~ x V~ x V~ x V~ x V~ x V~ x
JETINOX SELF-PRIMING CENTRIFUGAL ELECTRIC PUMPS
JETINOX SELF-RIMIN ENTRIFUL ELETRI UMS TENIL DT Operating range: fro. to 1. /h with head up to etres. Liquid quality requireents: clean, free fro solid or abrasive containants, non-viscous, non-aggressive,
KLM / KLP / DKLM / DKLP TECHNICAL DATA - KLM/KLP SINGLE WITH OVAL FLANGES HEATING, AIR CONDITIONING, SOLAR PANEL AND HOT WATER SYSTEM IN-LINE PUMPS
CIRCULATORS AND up body and otor support in cast iron. N flanged connections with threaded for control pressure gauges. Technopolyer ipeller and carbon/ceraic echanical seal. Four-pole, asynchronous otor
JET GENERAL DATA JET JET JET DAB PUMPS reserve the right to make modifications without prior notice
JT JT - JT ----- JT - NRL DT pplications Self-priing centrifugal pup with excellent suction capacity even when there are air bubbles and sall particles of sand in the water. Used especially for supplying
EVOTRON WET ROTOR ELECTRONIC CIRCULATORS TECHNICAL DATA APPLICATIONS ADVANTAGES
TECNICAL DATA EVOTRON Operating range: from, -, m3/h with head of up to metres. Pumped liquid temperature range: from - C to + C. Working pressure: bar ( kpa). Protection class: IP X. Insulation class:
50 Hz n= 2900 rpm. Standardised EN 733 centrifugal pumps INSTALLATION AND USE. PERFORMANCE RANGE Flow rate up to 6000 l/min (360 m³/h) Head up to 98 m
F Standardised EN 733 centrifugal pumps Hz n= 9 rpm Clean water Industrial use PERFORMNCE RNGE Flow rate up to (3 ) Head up to 9 m PPLICTION LIMITS Manometric suction lift up to 7 m Liquid temperature
KLME / KLPE / DKLME / DKLPE ELECTRONIC IN-LINE PUMPS FOR CIRCULATION SYSTEMS TECHNICAL DATA
KE / KE / KE / KE EETRONI IN-INE US FOR IRUTION SYSTES TENI T Operating range: fro to 7 /h with head up to,7 etres. uped liquid: clean, free of solids and abrasives, non-viscous, nonaggressive, non-crystallised
CMA - B - C - D - CMR
Cast iron self-priming electric pumps. APPLICATIONS Pressure boosting domestic plants Small-scale irrigation Moving non-aggressive liquids for civil and industrial use Washing plants Washing vehicles CMA-B-C-D
SINGLE IMPELLER CENTRIFUGAL ELECTRIC PUMPS in cast iron
Cast iron self-priming electric pumps. APPLICATIONS Pressure boosting domestic plants Small-scale irrigation Moving non-aggressive liquids for civil and industrial use Washing plants Washing vehicles CMA-B-C-D
Contents. Identification LHC. Horizontal split case pumps. Type key. Identification Type key
Contents dentification Type key Product data ntroduction Applications Features and benefits Performance range pole pole pole Construction Sectional drawing Construction features Test pressure Operating
DOMESTIC HOT WATER PUMPS WITH FIXED-SPEED MOTOR, 3x400V AP-, AKP- and AEP- series, threaded G1/2 G1 ¼ LOREM IPSUM JE ZULT MAAR 60 HZ.
LOREM IPSUM JE ZULT MAAR HZ m Head m/s m/s m/s m/s m/s Ø m Ø Ø Ø Ø l/s Flow kw Shaft power P Ø m/h Ø 9 Ø Ø kw 9 Total input power P Ø DOMESTIC HOT WATER PUMPS WITH FIXED-SPEED MOTOR, xv AP-, AKP- and AEP-
K DOUBLE-IMPELLER DOUBLE-IMPELLER ELECTRIC PUMPS
K DOUBLE-IMPELLER DOUBLE-IMPELLER ELECTRIC PUMPS ENERGY EFFICIENCY 7.5 TECHNICL DT Operating range: from,2 to 3 m 3 /h with head up to 97 metres. Pumped liquid: clean, free of solids and abrasives, non-viscous,
Production Programme BOMBAS ITUR, S.A.
Production Prograe THE COMPANY ITUR Pups was established in 9 and nowadays their head office is located in Zarautz (Spain). Fro the beginning the Copany was directed to the anufacturing of pups, going
ALUMINIUM CENTRIFUGAL FANS M20 4 x M5 x 10 INLET. 4 x M5 x 12
BCT61 DESCRIPTION Dutair BCT-series aluminium centrifugal fans with open die-cast aluminium impellers and forward curved blades are suitable for material transport and high pressure applications. The asynchronous
ALUMINIUM CENTRIFUGAL FANS. 4 x M6 x 16
DESCRIPTION Dutair BCT-series aluminium centrifugal fans with open die-cast aluminium impellers and forward curved blades are suitable for material transport and high pressure applications. The asynchronous
TPH Series WALRUS PUMP. Multi-stage Centrifugal Pump. All specifications are subject to change without notice. 014
T Series WLRUS PUMP ll specifications are subject to change without notice. Multistage entrifugal Pump T T pplications The WLRUS T Series is horizontal multistage centrifugal pump, suitable for clean water/liquid
P U M P S. The quality standard for hydraulic efficiency and suction lift. PERIPHERAL PUMPS TEP/ TSP - SERIES 50Hz
P U M P S THE BENCHMARK FOR PERFORMANCE The quality standard for hydraulic efficiency and suction lift. PERIPHERAL PUMPS TEP/ TSP - SERIES 5Hz I N D E X TEP / TSP SERIES - PERIPHERAL PUMPS Page No. General
ELECTRONIC WET ROTOR CIRCULATORS
ELECTRONIC WET ROTOR CIRCULATORS TECNICAL DATA EVOTRON WET ROTOR ELECTRONIC CIRCULATORS Operating range: from, -, m/h with head of up to metres. Pumped liquid temperature range: from -1 C to +11 C. Working
P U M P S. The quality standard for hydraulic efficiency and suction lift. PERIPHERAL PUMPS TEP/ TSP - SERIES 50Hz
P U M P S THE BENCHMARK FOR PERFORMANCE The quality standard for hydraulic efficiency and suction lift. PERIPHERAL PUMPS TEP/ TSP - SERIES 5Hz I N D E X TEP / TSP / TRP SERIES - PERIPHERAL PUMPS Page
ALUMINIUM CENTRIFUGAL FANS. 4 x M6 x OUTLET x M6 x 20
DESCRIPTION Dutair LK-series industrial ventilators consist of a robust body made from die-cast aluminium alloy. Impellers are made of extruded aluminium. The asynchronous electric motors are maintenance
LES. Single-stage end-suction pumps Identification Type key
Contents Singlestage endsuction pumps Identification Type key Product data Introduction Applications Features and benefits Performance range pole pole 6 pole Construction Sectional drawing Construction
GRUNDFOS DATA BOOKLET MAGNA, UPE. Series 2000 circulator pumps
GRUNDFOS DATA BOOKLET MAGNA, UPE Series circulator pumps Contents Product data MAGNA and UPE 3 Duty range 3 Characteristic features 3 Benefits 3 Applications 3 eating systems 3 Pumped liquids Type key
ALUMINIUM CENTRIFUGAL FANS x M6 x x M6 x 16
LK4 DESCRIPTION Dutair LK-series industrial ventilators consist of a robust body made from die-cast aluminium alloy. Impellers are made of extruded aluminium. The asynchronous electric motors are maintenance
IN-LINE ELECTRONIC ELECTRIC PUMPS FOR CIRCULATION SYSTEMS
IN-LINE ELECTRONIC ELECTRIC UMS FOR CIRCULATION SYSTEMS CERTIFICATES DAB products are appreciated for their quality, preferred for their reliability, solected for their profit. IN-LINE ELECTRONIC ELECTRIC
ELECTRONIC WET ROTOR CIRCULATORS
ELECTRONIC WET ROTOR CIRCULTORS Technical Sheet ELECTRONIC CIRCULTORS FOR ETING ND IR CONDITIONING SYSTEMS Energ ia e y GENERL DT compliant with the 3 and european directive ErP 9//EC (ex EuP) pplications
MULTISTAGE CENTRIFUGAL PUMP TPH 2/4/8/12/25/50T. 50Hz. WALRUS PUMP ISO 9001 Certified
MULTISTAGE CENTRIFUGAL PUMP TPH /////T Hz WALRUS PUMP ISO Certified TPH Applications The WALRUS TPH Series is horizontal multistage centrifugal pump, suitable for clean water/liquid without abrasive matters.
50/60 Hz. ecocirc XL and XLplus. high efficiency WET ROTOR circulators. ErP 2009/125/EC
/ Hz ecocirc XL and XLplus high efficiency WET ROTOR circulators FOR COMMERCIAL HEATING AND COOLING applications ErP 9/1/EC Cod. 1971 Rev. C Ed.11/1 Lowara, ecocirc, Xylect are trademarks of Xylem Inc.
46 A 4 2 SX. Atlas version Identification code. Atlas version Dimensions, Weight, Water content. Reference: 46A42 SIZE RANGE ATLAS ROWS
Atlas version Identification code Reference: A A SX / POLE (/ r.p..) RANGE ATLAS ROWS COIL STEEL TUBE SP COIL COPPER TUBE Atlas version Diensions, Weight, Water content Diensions () () () () () () () ()
IL series. Centrifugal marine IN-LINE pumps
IL series Centrifugal marine IN-LINE pumps DESCRIPTION Vertically built centrifugal IN-LINE pumps are made with standardized DIN-22 parts, with in-line suction and discharge flanges. This arrangement requires
GRUNDFOS DATA BOOKLET MAGNA, UPE. Series 2000 circulator pumps
GRUNDFOS DATA BOOKLET Series circulator pumps Contents Product data MAGNA and UPE 3 Duty range 3 Characteristic features 3 Benefits 3 Applications 3 eating systems 3 Pumped liquids Type key 5 Performance
Serie B2.1. Flanged ductile iron ball valve. made in. Application fields. Shut-off valves E U R O P E. 18
erie B. Flanged ductile iron ball valve BRanDOni made in E U R O P E Application fields WATER CONdITIONING GA EATING INdUTRY FIRE FIGTING www.brandoni.it erie B. eries B. valves are shut-off ball valves
PRESSURE GAUGE SELECTORS
PRESSURE GUGE SELECORS Gauge isolator valves are designed to protect pressure gauges from pressure shocks when the pressure reading is not required; after each reading setting the selector to the closed
Standardized Chemical Pumps. Fields of Application. Designation. Design. Operating Data. Type Series Booklet /7-10 G2 CPK-H
Type Series Booklet.5/7-0 G CPK-H Standardized Chemical Pumps to EN 5/ISO 5/ISO 599, heatable Automation products available: Hya-Drive Hyamaster hyatronic Fields of Application CPK-H pumps are used for
High-efficiency Circulator Pump. Rio-Eco N / Rio-Eco Z N. Type Series Booklet
High-efficiency Circulator Pump Rio-Eco N / Rio-Eco Z N Type Series Booklet Legal information/copyright Type Series Booklet Rio-Eco N / Rio-Eco Z N KSB Aktiengesellschaft All rights reserved. The contents
The FLUX F 430 with mechanical seal
The FLUX F 0 with mechanical seal Flexible coupling between motor and pump The pump must be used with many varying liquids, consequently the smallest residual left within the pump is unacceptable. You
G-FIRE GROOVED FITTINGS
G-FIRE GROOVED FITTINGS 29 Pictorial Table of Contents Figure 510 90 Cast Elbows Page 32 Figures 212 & 312 22 1 2 Elbows Page 35 Figure 501 45 Cast Elbows Page 32 Figures 211 & 311 11 1 4 Elbows Page 36
Contents. Performance Curves/Technical Data. General Data Performance Range Sectional Drawing TPH 2T TPH 4T TPH 8T TPH 12T TPH 25T TPH 50T
Contents General Data Performance Range Sectional Drawing Performance Curves/Technical Data T T T T T 8T T T T T T T 7 9 T Series Multistage Centrifugal Pump Hz Power:.. kw Head: Up to 7M Flow: Up to L/min
GRUNDFOS DATA BOOKLET MAGNA, UPE. Series 2000 circulator pumps
GRUNDFOS DATA BOOKLET Series circulator pumps Contents Product data MAGNA and UPE 3 Duty range 3 Characteristic features 3 Benefits 3 Applications 3 eating systems 3 Pumped liquids 3 Type key Performance
VOLUMEC. Valve Position Indicator 5
VOLUMEC Valve Position Indicator 5 2 KRACHT CORP. 8600 S Wilkinson Way Unit A Perrysburg, OH 43551 USA P +1 419 874 1000 F +1 419 874 1006 flowmeters@krachtcorp.com www.krachtcorp.com VOLUMEC Valve Position
GRUNDFOS DATA BOOKLET MAGNA, UPE. Series 2000 circulator pumps
GRUNDFOS DATA BOOKLET MAGNA, UPE Series circulator pumps Contents Product data MAGNA/UPE 3 Duty range 3 Characteristic features 3 Benefits 3 Applications 3 eating systems 3 Pumped liquids 3 Type key Performance
143 EEX gerotor pump unit. For use in oil circulation systems in gas- and dust-ex-atmospheres
1 EEX gerotor pump unit For use in oil circulation systems in gas- and dust-ex-atmospheres Gerotor pump series 1 EEX The 1 EEX product series has been specifically designed for centralized lubrication
TPH Series 50Hz Multi-stage Centrifugal Pump
WLRUS PUMP T Series Hz Multistage Centrifugal Pump ll specifications are subject to change without notice. 9 T Product data pplications Page Standard mode Page Operation conditions Page Pump construction
Single Phase Motors Technical Datasheets
Single Phase Motors Technical Datasheets EN A dynamic, strong and ambitious Group: Orange1 Holding is an international renown Group, one of the most important European manufacturers of single-phase and
THE ANSWER TO PROBLEMS OF: CORROSION, ABRASION, GRANULATED MATERIALS, POWDERS, SLUDGE, GAS ETC.
P PINC VLVE Mod. S pag. Mod. S pag. Mod. S pag. Mod. SD pag. Mod. S pag. Mod. S pag. 0 Mod. S pag. Mod. S pag. Mod. S pag. Mod. S0 pag. Mod. S pag. 0 Mod. S pag. Mod. S pag. Mod. S pag. Mod. S pag. TE
GRUNDFOS PRODUCT GUIDE. VersaFlo UP, UPS. Series 200 circulator pumps 60 Hz
GRUNDFOS PRODUCT GUIDE VersaFlo UP, UPS Series circulator pumps Hz Contents ission General data Terminal box modules Applications Pumped liquids Type key 5 Nameplate 5 Performance range UPS pumps UP pumps
Coriolis Mass Flow Meter and Counter
oriolis Mass Flow Meter and ounter easuring onitoring analysing Measuring range: upto 70 t/h Measuring accuracy (ass flow): iquids: ±0.35% of easured value ases: ± 0.75% of easured value pax P, tax 1 Flange...,
Thermal oil. Hot Water Pumps. Fields of Application
Type Series ooklet 0.50 G3 Etanorm SY Thermal Oil / Hot Water Pumps Fields of pplication Etanorm SY pumps are used in heat transfer systems (DIN 75) or in hot water circulation systems. Operating Data
Gear Wheel Flowmeter for viscous liquids Model DZR. (option 3):
Gear Wheel Flowmeter for viscous liquids measuring monitoring analysing DZR easuring range:. -... 3-7 l/min Accuracy: ±.3... ±1% of reading p max : bar t max : 1 C Orocess O connection: G ⅛, G ⅜, G ½,
Polígono Indutrial O Rebullón s/n Mos - España -
FP 5 Polígono Indutrial O Rebullón s/n. 646 - Mos - spaña - rodavigo@rodavigo.com SRIS FP Working pressure 40 bar Style S Style Style T Style D Style V Style Z 5 Polígono Indutrial O Rebullón s/n. 646
Maximum pressure 420 bar Flow rate to 152 l/min. 560 bar. 140 l/min. Flow rate l/min FMM 050 1/2 1,50 3/4 1,00. Δp bar 0,50 0,00 FHA 051 1,50 1,00
FMM 00 Maximum pressure 0 bar Flow rate to l/min FHA 0 Maximum pressure 60 bar Flow rate to 0 l/min Technical data FMM 00 Filter housing (Materials) Head: Cast iron (chemical heat treatment) Housing: Steel
Flow rates to 485 l/min
FB Maximum pressure 0 bar Flow rates to 8 l/min Technical data Filter housing (Materials) ead: Cast iron (chemical heat treatment) ousing: Steel (chemical heat treatment) Bypass valve: Steel Check valve:
Flow rates to 485 l/min
FB Maximum pressure 0 bar Flow rates to 8 l/min Technical data Filter housing (Materials) ead: Cast iron (chemical heat treatment) ousing: Steel (chemical heat treatment) Bypass valve: Steel Check valve:
Air Cooler Industry AC-LN 1-7 / ACA-LN 2-7 / ACAF-LN 2-7
ir ooler Industry -LN -7 / -LN -7 / F-LN -7 Symbol General The -LN -7 air cooler series can be used in all areas where either oil or water-glycol is to be cooled with air. The coolers with an axial fan
Flow rates to 485 l/min
FB Maximum pressure 0 bar Flow rates to 8 l/min Technical data Filter housing (Materials) ead: Cast iron (chemical heat treatment) ousing: Steel (chemical heat treatment) Bypass valve: Steel Check valve:
/2 way valves (solenoid actuated diaphragm with forced lifting) 1/4... 2
/ way valves (solenoid actuated diaphragm with forced lifting) /4... Damped operation Operation without differential Suitable for vacuum igh flow rate For systems with low or fluctuating Brass body Wide
Standardized Chemical Pumps to EN /ISO 2858/ISO 5199 sealless, with magnetic drive. Fields of Application. Designation. Design.
Type series booklet.5/- G2 Magnochem Standardized Chemical Pumps to EN 5/ISO 25/ISO 99 sealless, with magnetic drive Automation products available: PumpExpert Hyamaster hyatronic Fields of Application
60 Hz. e-nsc Series HORIZONTAL CENTRIFUGAL ELECTRIC PUMPS EQUIPPED WITH IE3 MOTORS
6 Hz e-nsc Series HORIZONTAL CENTRIFUGAL ELECTRIC PUMPS EQUIPPED WITH IE3 MOTORS Cod. 19112831 Rev. B Ed.7/217 Xylect TM Xylect TM is a pump solution software with an extensive online database of product
High Pressure fi lters. FHB series. Maximum working pressure up to 32 MPa (320 bar) - Flow rate up to 485 l/min
High Pressure fi lters FHB series Maximum working pressure up to MPa (0 bar) - Flow rate up to 8 l/min High Pressure fi lters Introduction FILTER SIZING INDEX CALCULATION CORRECTIVE FACTOR Page Introduction
CALEFFI. Modulating digital controller for heating and cooling. 161 series 01122/08 GB. replaces dp 01122/05
Modulating digital controller for heating and cooling series REGI ERED SI EN ISO 00:000 Cert. n FM UNI EN ISO 00:000 Cert. n 000 0/0 G replaces dp 0/0 Function The controller can be used with three-point
DS 300. Electronic Pressure Switch. with IO-Link interface. Stainless Steel Sensor. accuracy according to IEC 60770: 0.35 % FSO.
DS 00 Electronic Pressure Switch with IO-Link interface Stainless Steel Sensor accuracy according to IEC 60770: 0.5 % FSO Nominal pressure from 0... 00 mbar up to 0... 600 bar Digital output signal IO-Link
03 - measures, conversion tables
- measures, conversion tables - International system of units- tables - Conversion tables - Specific weights and melting points tables - tables - Weight tables XVI INTERNATIONAL SYSTEM OF UNITS - TABLE
Metal oil filler and air breather filler caps. Bayonet connection. Reservoir holes. TA46 B (Materials)
Metal oil filler and air Series T 46 4 5 6 4 ayonet connection Ø 46 7 8 46 Reservoir holes T46 (Materials) M5 - Cover: Chrome Plated Steel - Filter element: Impregnated paper Polyurethane 64-6 - Flange:
ELECTRONIC CIRCULATORS FOR HEATING AND COOLING SYSTEMS. ErP. eady
ELECTRONIC CIRCULATORS OR EATING AND COOLING SYSTEMS ErP eady TECNICAL DATA EVOSTA 2 WET ROTOR ELECTRONIC CIRCULATORS Operating range:,-3,6 m 3 /h with head up to 6,9 metres. Pumped liquid temperature
Direct-operated 2/2-way solenoid valves Type EV210B
Data sheet Direct-operated 2/2-way solenoid valves Type EV20B EV20B covers a wide range of direct-operated 2/2-way solenoid valves for universal use. EV20B is a very robust valve program with high performance
ISO-C Series chemical Pump
Structural drawing FEATURES ISO-C series chemical process pump, this product carried out the standard o GB/T perormance and dimension o axial suction centriugal pump (bar) ISO-C series pump take in appearance
SERIES FMP. Working pressure. 280 bar. Style D Style V Style Z. Style T. Style B. Style S B B D.I. D.I. D.I. D.I. D.I. D.I.
6 FMP SERIES FMP Working pressure 80 bar Style S Style Style T Style D Style V Style Z 7 Technical data Filter body (Materials) ead: Cast iron (chemical heat treatment) ousing: Cast iron (chemical heat
Linear Motors Stainless Steel IP69K
Linear Motors Stainless Steel IP69K Stainless Steel Motors IP69K Designed for harsh or aggressive environment Hygienic design for food industry Stainless steel housing EN1.444 / ISI 316 Completely sealed,
Working pressure. 420 bar. Style T. Style B. Style D Style V Style Z. Style S B B D.I. D.I. D.I. D.I. D.I. D.I.
5 FP SRIS FP Working pressure 40 bar Style S Style Style T Style D Style V Style Z 5 Technical data Filter body (Materials) ead: Cast iron (chemical heat treatment) ousing: Steel (chemical heat treatment)
Polígono Indutrial O Rebullón s/n Mos - España -
FB 8 Polígono Indutrial O Rebullón s/n. 646 - Mos - España - rodavigo@rodavigo.com SERIES FB Working pressure 0 bar Style S Style B Style T Style D B B B B D.I. D.I. D.I. D.I. A A A A 8 Polígono Indutrial
Level Sensor PanCake PR 6251 and Mounting Kit PR 6051
Level Sensor PanCake PR 6251 and Mounting Kit PR 6051 The space-saving solution for simple applications The sensors of the PR 6251 series have been specially designed for simple weighing of silos and horizontal
Calio-Therm NC Type Series Booklet
High-efficiency Drinking Water Pump Type Series Booklet Legal information/copyright Type Series Booklet All rights reserved. The contents provided herein must neither be distributed, copied, reproduced,
DEBEM IM VERTICAL CENTRIFUGAL PUMPS.
IM VERTICA CENTRIFUGA PUMPS The IM series of resin-encased vertical centrifugal pumps features high-performance pumps for fixed installations with pump immersed directly in the tank and operated by a directdrive
DBS315 1-phase SIDE CHANNEL BLOWERS
DBS15/ 1-phase DESCRIPTION Dutair blowers for pressure and vacuum are compact machines consisting of an electric motor with a built-on pump housing. The rotational speed of the impeller creates a high
STEEL. General Information
General Information General Information TYPICAL STRESS-STRAIN CURVE Below is a typical stress-strain curve. Each material has its own unique stress-strain curve. Tensile Properties Tensile properties indicate
TPH. 60Hz. Standard mode TPH 4T 2K. Code TPH 4T 2K S F A H
C US NSF/ANSI TPH Applications: The TPH Series are modernly designed with quiet and high efficient operation pumps, suitable for dependable water transfer, circulating or booster service. -Industrial circulation
Digital AC Motors MHD
Digital AC Motors MHD090 8-1 8 MHD090 8.1 Technical Data Description Symbol Unit MHD090B-035 Type of cooling Natural Natural Surface Liquid Motor overtemperature 60 K 100 K 60 K/100 K 60 K/100 K Electric
Flow rates to 750 l/min
FP Maximum pressure 0 bar Flow rates to 70 l/min Technical data Filter housing (Materials) ead: Cast iron (chemical heat treatment) ousing: Steel (chemical heat treatment) Bypass valve: AISI L (FP 0-0)
CE 6403 APPLIED HYDRAULIC ENGINEERING UNIT - V PUMPS
CE 6403 APPLIED HYDRAULIC ENGINEERING UNIT - V PUMPS Centrifugal pups - Miniu speed to start the pup - NPSH - Cavitations in pups Operating characteristics - Multistage pups - Reciprocating pups - Negative
REFERENCE MATERIALS
REFERENCE MATERIALS 2018.1 www.spl-labmat.cz The SPL RM divide into four groups: CRM (with the status of national CRM) RM and QCM for quality control Hi Tec candidate materials to be ultimately certified
AC axial compact fan
ebm-papst Mulfingen GmbH & Co. KG Bachmühle D-7467 Mulfingen Phone +49 798 8-0 Fax +49 798 8-0 info@de.ebmpapst.com www.ebmpapst.com Limited partnership Headquarters Mulfingen County court Stuttgart HRA
Flow rates to 750 l/min
FP Maximum pressure 0 bar Flow rates to 70 l/min Technical data Filter housing (Materials) ead: Cast iron (chemical heat treatment) ousing: Steel (chemical heat treatment) Bypass valve: AISI L (FP 00-0)
R-Plus System Frontespizio_R_PlusSystem.indd 1 11/06/ :32:02
R-Plus System R-Plus System R-Plus system R-Plus system description Fig. R-Plus system R-Plus System is Rollon s series of rack & pinion driven actuators. Rollon R-Plus System series linear units are designed
Prima range. Alifter range. magnetical driven pumps in thermoplastic materials TMP TMA. centrifugal. self-priming
Prima range TMP centrifugal Alifter range magnetical driven pumps in thermoplastic materials TMA self-priming Prima - Alifter In this catalog Argal proposes the range of PRIMA pumps, magnetical driven,
Absolute encoders multiturn
elektronischer electronic multiturn, Multiturn, magnetic magnetisch Sendix M66 / M68 (shaft / hollow shaft) The Sendix M6 with Energy Harvesting Technology is an electronic multiturn encoder in miniature
Cooler-Bypass Thermostat Valve, Size 10
Cooler-Bypass Thermostat Valve, Size Q max = l/min, p max = bar Temperature-controlled, integral relief function Description These direct acting bypass thermostat valves are size, temperature controlled,
14:1400 (0206) KRAL Volumeter - OMG
14:1400 (0206) KRAL Volumeter - OMG OMG - Universal OMG The flowmeter for a wide range of applications Operating Conditions and Materials Flow Range: 0.1 to 7,500 l/min Max. Pressure: 250 bar Temperature
Field IT 50T Series Transmitters
Data Sheet SS/G/A_ Field IT 0T Series Transmitters gauge/absolute pressure transmitter Ranges: -00 to 0000kPa - to 00bar -. to 6000psi Base accuracy : 0.% (BFSL) Chemical Vapour Deposition (CVD) technology
VDN2.. VEN2.. VUN2.. Radiator valves. Building Technologies HVAC Products ACVATIX TM. NF norm, for 2-pipe heating systems
06 EN - Straight valves VDN.. Angle valves VEN.. Reverse angle valves VUN.. ACVATIX TM Radiator valves NF norm, for -pipe heating systems VDN.. VEN.. VUN.. Valve bodies made of brass, mat nickel-plated
SOLUTIONS FOR TUTORIAL QUESTIONS COURSE TEP Ideal motor speed = 1450rev/min x 12/120 = 145 rev/min
SOLUTIONS FOR TUTORIL QUESTIONS COURSE TE 49 ) Maxiu pup diplaceent i c /rev. Motor diplaceent i c /rev. a) t full pup diplaceent: Ideal otor peed 4rev/in x / 4 rev/in The lo in otor peed due to the voluetric
Pressure transmitters for industrial applications MBS 32 and MBS 33
Data sheet Pressure transmitters for industrial applications MBS 32 and MBS 33 The standard pressure transmitters MBS 32 and MBS 33 are designed for use in almost all industrial applications, and offer
Made in Italy HOSE REELS CATALOGUE TECHNOLOGY FOR FLUIDYNAMICS. No. E14/A1
Made in Italy HOSE REELS CATALOGUE TECHNOLOGY FOR FLUIDYNAMICS No. E14/A1 The complete range of our products is presented in the specific catalogues: HOSE REELS CATALOGUE No. E14/A2 HOSE REELS CATALOGUE
Gear Wheel Flow Meter for Viscous Fluids
Gear Wheel Flow Meter for Viscous Fluis measuring monitoring analysing Measuring range:. to 5 L/min Measuring accuracy: ±.3 up to ±1% of actual flow pmax: bar tmax: C rocess connection: G 1, G 3, G 1,
Working pressure. 320 bar. Style T. Style D. Style S. Style B B B D.I. D.I. D.I. D.I.
8 FB SERIES FB Working pressure 0 bar Style S Style B Style T Style D B B B B D.I. D.I. D.I. D.I. A A A A 8 Technical data Filter body (Materials) ead: Cast iron (chemical heat treatment) ousing: Steel
Linear Motors with ATEX and IECEx Certification
Linear Motors with EX Linear Motors with TEX and IECEx Certification Designed for explosion proof environement Categories: gas zones 1/2, dust zones 21/22 Stainless steel housing EN1.444 / ISI 316 Completely
barmesapumps.com SELF-PRIMING CENTRIFUGAL TRASH PUMP SPECIFICATIONS Series: SH8-U Suction: 8" Discharge: 8" Spherical solids handling: 3"
SELF-PRIMING CENTRIFUGAL TRASH PUMP Series: SH-U Suction: " Discharge: " Spherical solids handling: 3" SIZE BEARING - PUMP END " x " NPT, lbs., female flange. Open single ball, radial load. LIQUID TEMPERATURE
Surface-mounting Thermostats ATH Type Series
Page 1/9 urface-mounting Thermostats ATH eries k enclosure protection IP 54 k tested to IN EN 14597 (replacing IN 3440) Brief description Thermostats control and monitor thermal processes. Instruments
Single Phase Motors Technical Datasheets
Single Phase Motors Technical Datasheets EN A dynamic, strong and ambitious Group: Orange1 Holding is an international renown Group, one of the most important European manufacturers of single-phase and