Gasketed Sewer Fittings SDR 35 Injection Molded in Sizes 4 12 Fabricated in Sizes 15 36
|
|
|
- Amie Logan
- 5 years ago
- Views:
Transcription
1 Gasketed Sewer Fittings SDR Injection Molded in Sizes Fabricated in Sizes G while extra heavy support is provided under the pipe stop at branch intersections for added strength. Where available, reducing branches on injection molded, 0, and tees, the reducing branch body and reducing branch hub area below the gasket race. Applications of sewage and surface water. applicable. Product Spotlights Controlled Settlement Joint The controlled settlement joint (CSJ) inhibits penetration of the riser through the lateral connection and into the waterway. The new double gasketed CSJ is a slip joint that permits a exceeding 00 lb/feet. Riser movement typically occurs from settlement forces or concentrated loads resulting from elevation changes in service connections. The controlled settlement joint that inhibits damage such as splitting, cracking, or spearing. As a result, this minimizes costly excavation and replacement of Vertical Riser Adapter (G9, G9, G9) This simple solution in conjunction with the unique integral the pipe stop. Refer to page G for pricing and available Third y Tested Short Specs Gasketed Sewer Fittings shall be manufactured in accordance with ASTM D, ASTM F, and CSA B.. They shall be injection molded from Sanitation Foundation (NSF), to meet ASTM D7. Gaskets shall be manufactured in accordance with ASTM F 77 or ASTM proper installation and to prevent dislocation or misalignment during system assembly. Gasket joints must comply with ASTM Where available, reducing branches on injection molded, 0, thickness in the reducing branch body and reducing branch hub area below the gasket race. by the International Association Of Plumbing And Municipal Standards Association (CSA) to meet CSA B.. ATTENTION:not to be used with compressed air or gases. Royal does not recommend that piping systems that include its products be tested with compressed air or gases. Royal Building Products (formerly Plastic Trends) 00 Mound Road Shelby Twp., MI Fax:.7.0
2 Straight Tee GxGxG * x *0 x *0 x *0 x 0 * x * x * x 0 * x 7 x 7 x 0 x x x x x x 7 x x 0 x x x x x x 7 x x G0 G0 G0 G0 G0 G00 G00 G00 G0 G0 G0 L0 L0 L0 L0 L07 L0 L ,009.9,.7,7.,79.,07.,7.,9.,0.,.,.,.,7.09,9.09,.0,.,9.00,.,7.,0.,7.,77.70,.9,0.,99. 7,7. 9,9.,.,7.90,79.,.,7. 7,.9 7,.7 7,.0 9,9.7 9,77.,.79,. 7,70. 7,.,. 9,9. 9,9. 9,.0,.7,99.9,.99,.,.0 9,0. 0,0.0 0,97.77,.,7.,707.7,7.,9.70,. 9,07. Degree Wye GxGxG *0 x *0 x 0 * x * x 0 * x 7 x 7 x 0 x x x x x x 7 x x 0 x x x x x x 7 x x G G G G G G0 G0 G0 G G G L L L L L7 L L ,0.,07.,.,7.79,.,97.7,970.70,0.9,0.7,7.,99.,79.0,0.,0.9,.,.7,0.,7.09,99.,7.,07.,.7,0.,0.0 7,9.,.09 0,.,0.77,.,9.,.07 7,0.9 7,9.,.0,. 9,9.7 0,9.,.9,9. 7,9.0 7,9.9 9,07.0 0,0. 0,9.9 0,9.7,7.0,.9,0.9,79.,77.7 0,0. 0,.9,.,000.9,.70,9.0,97. 7,7.9,.7,7. Page G * Denotes Molded Fitting s in Bold feature Heavy Duty Branches (SDR ) Third party tested and listed by CSA, NSF and UPC
3 Gasketed Sewer Fittings SDR G Straight Tee SxGxG x 0 x 0 x 0 x 0 x 0 x x x x 0 x 7 x 7 x 0 x x x x x x 7 x x 0 x x x x x x 7 x x G G G G L L70 L7 L7 L7 L7 L7 L77 L7 L ,.,0.,9.,99.,07.,.9,7.0,.,9.7,70.7,90.,.90,.0,9.0,009.9,9.0,0.7,70.90,7.7,0.7,9.,9.,.77,0.0,70. 0,9.0,7.,.09,.7,7.9 7,79.0,.0,.7,79. 0,7.70,. 7,0. 7,.0,.7,7. 9,. 0,70.7 0,970.,9.7,979.7,7.9 7,9.7,9. 9,9.,0.,.7,.,7.77,.,7.7 7,. 9,.,90. 9,900.0 Degree Wye SxGxG 0 x 0 x 0 x 0 x 0 x x x x 0 x 7 x 7 x 0 x x x x x x 7 x x 0 x x x x x x 7 x x G G G G G L L L L L L L7 L L , ,07.,.9,9.0,7.9,00.,0.7,.,.,.,.,.,7.,00.,7.,9.,.0,90.7,77.7 7,9.0,.,9.,7.,0.,.90,9.0,. 9,7.70,7.,.,.9 7,0. 7,.,7.7 9,.7 9,90. 9,.,9.7,.0 7,9.0 7,9.7 9,070. 9,9. 0,.77,77.,07.,.77,77.9,. 9,7. 0,07. 0,.,.7,99.,.,90.,9.9 7,. 0,.7,09.,99.,09.9 * Denotes Molded Fitting s in Bold feature Heavy Duty Branches (SDR ) Third party tested and listed by CSA, NSF and UPC Page G
4 0 x 0 x x x 0 x 0 x x x x x x x x x 0 x 0 x 0 x 0 x 0 x x x x 0 x G G G G G G0 G0 G0 G G G L Straight Tee with DWV Branch GxGxDWV G Straight Tee with DWV Branch GxGxDWV H Combo Wye & / Bend GxGxG ( Piece) ,9.,997.9,7.,9.7,9.,0.,.9, ,0.,90.7,9.0,777.,0.,9.,.7, ,., ,07.,.,.00,.9,7.0,0.,0.,.7,7.90,.07,0.79,997.,.,.,.7,09.,9.0,7. 7,0.0,7.9,.0 0,9. 0 x 0 x x x 0 x 0 x x x x x x x 0 x 0 x 0 x 0 x 0 x x x x 0 x L0 L L Degree Wye with DWV Branch GxGxDWV G Degree Wye with DWV Branch GxGxDWV H Double Degree Wye GxGxGxG ,09.0,097.,.7,09.,0.9,7.9,9., ,9.,997.9,79.,9.9,9.,.9,.9, ,0.,.,.7,07.9,.7,.,7.,.,.0,.,.0,.7,9.,.9,9.,09.,7. 7,09.,.,9.,7.9,.7,90. 0,7.,.7,.,.9 Page G * Denotes Molded Fitting s in Bold feature Heavy Duty Branches (SDR ) Third party tested and listed by CSA, NSF and UPC
5 Gasketed Sewer Fittings SDR G 0 x 0 x 0 x 0 x 0 x x x x 0 x Sanitary Tee (TY) GxGxG G G7 G G G L0 L ,.9, ,.,9.,00.0,.7,.,.07,0.79,.0,.,.7,7.7,.,9.,9.0,.9 9,99.0 9,. 0,.90 x x 0 x 0 x x x 0 x 0 x x x Sanitary Tee with DWV Branch (TY) GxGxDWV G 0 Sanitary Tee with DWV Branch (TY) GxGxDWV H ,.,.77,99.,.,9.,99.9,.,7.0, ,0.7,07.,900.,09.0,7.7,7.,0.,9.99 Sanitary Tee (TY) SxGxG 0 x 0 x 0 x 0 x 0 x x x x 0 x Way Cleanout GxGxG G7 G77 G7 G7 G7 L70 L7 G00 G , ,90.0, ,09.,.,0.,.,0.,0.,0.9,7.9,009.9,.9,.7,. 7, Tee Cross GxGxGxG x x x x x x 0 x 0 x 0 x 0 x 0 x x x x 0 x x L79 L79 L79 L790 L79 L79 L ,00.,9.,07.0,7.,.,.,.90,0.,7.0,.,.,9.9,.,9.,0.,09.7,0.,79.9,7.99,079.9,0.,.,9.7 7,.7 * Denotes Molded Fitting s in Bold feature Heavy Duty Branches (SDR ) Third party tested and listed by CSA, NSF and UPC Page G
6 * * * *0 * G0 G0 G0 G00 G / Bend (90) GxG / Bend (90) SxG * * * *0 * G G G G0 G / Bend (90) GxG Long Sweep / Bend (90) SxG Long Sweep * * * 0 7 G G7 G G0 G L0 L0 L0 L0 L07 L0 L ,.9,90.,9.9,7.70,9.9,.9 9,000.9 * * * 0 7 G7 G77 G7 G70 G7 L L L L L7 L L ,.9,90.,9.9,7.,9.9,.9 9,000.9 Deep Socket / Bend (90) H H77 H Deep Socket / Bend (90) H7 H777 H / Bend () GxG / Bend () SxG * * * *0 * 7 G0 G0 G0 G00 G0 L0 L0 L0 L0 L07 L0 L ,0.7,.7,7.9,77.0,.9,. * * * *0 * 7 G0 G0 G0 G00 G0 L0 L0 L0 L0 L07 L0 L ,0.7,.7,7.9,77.0,.9,. Deep Socket / Bend () GxG * H0 H0 H Deep Socket / Bend () SxG * H0 H0 H / Bend () GxG (Extra Long Sweep Radius) / Bend () SxG (Extra Long Sweep Radius) 0 L0 L0 L0 L00 L0 L ,90.,0.,0. 0 L90 L90 L90 L900 L90 L ,90.,0.,0. / Bend () GxG / Bend () SxG 0 7 L. L. L. L0. L. L. L. L. L. L7. L. L ,00.,0.07,99.,7.0,77.9,.9,. 0 7 L. L. L. L. L. L. L. L. L. L7. L. L ,00.,0.07,99.,7.0,77.9,.9,. Page G * Denotes Molded Fitting s in Bold feature Heavy Duty Branches (SDR ) Third party tested and listed by CSA, NSF and UPC
7 * * * *0 * 7 G70 G70 G70 G700 G70 L70 L70 L70 L70 L707 L70 L ,00.,0.07,99.,7.0,77.9,.09,. Gasketed Sewer Fittings SDR / Bend (.) GxG / Bend (.) SxG * * * *0 * 7 G7 G7 G7 G70 G7 L7 L7 L7 L7 L77 L7 L7 0 G ,00.,0.07,99.,7.,77.9,.09,. Deep Socket / Bend (.) GxG * H70 H70 H Deep Socket / Bend (.) SxG * H7 H7 H / Bend (.) GxG (Extra Long Sweep Radius) / Bend (.) SxG (Extra Long Sweep Radius) 0 L90 L90 L90 L90 L9 L ,90.,0.,0. 0 L90S L90S L90S L90S L9S L9S ,90.,0.,0. / Bend (.) GxG / Bend (.) SxG 0 7 L9 L9 L9 L9 L9 L9 L9 L9 L9 L97 L9 L ,00.,0.07,99.,7.0,77.9,.9,. 0 7 L L L L L L L L L L7 L L ,00.,0.07,99.,7.0,77.9,.9,. Cap (G) * * * *0 * 7 G0 G0 G0 G00 G0 L0 L0 L0 L0 L07 L0 L ,.99,77.,.,7.,9.77 Spigot Plug (S) * * * *0 * 7 G G G G0 G L L L L L7 L L ,.7,70.09,0.,7.,77. Stop Coupling GxG * * * *0 * 7 G0 G0 G0 G00 G0 L0 L0 L0 L0 L07 L0 L ,0.7,7.9,.,9.9,7.7,9. Repair Coupling GxG * * * *0 * 7 G G G G0 G L L L L L7 L L ,0.7,7.9,.,9.9,7.7,9. * Denotes Molded Fitting s in Bold feature Heavy Duty Branches (SDR ) Third party tested and listed by CSA, NSF and UPC Page G7
8 *0 x * x * x 0 x 0 x x x x x x 7 x 0 x x x x x x 7 x Concentric Increaser Coupling GxG ,0.,.,.,9.,0.77,9.9,0.,.9,9.,.,.,.9,0.7,7.07,0.,.0,7.9,0.,.79,.,70.,7.,0.,.9,0.0,7.,97.,9.7,.0 7,07. 9,.7 9,. 0,.0,09.00,7.9,97.,9.7,.0,7.0 9,. 9,. 0,.,.,770.,.9 *0 x * x * x 0 x 0 x x x x x x 7 x 0 x x x x x x 7 x G G9 G0 Concentric Increaser Bushing SxG ,00.,0.,0.,0.7,0.77,0.0,09.,0.,09.,.0,.0,7.9,.7,7.,0.,097.,.7,.,.,7.,9.,79.7,.99,.,.,.,9.,. 7,07. 9,.7 9,. 0,.0,09.0,0.7,.,9.,. 7,07. 9,. 9,. 0,.,.7,770.,. Controlled Settlement Joint GxG x x x H00 H00 H Controlled Settlement Joint SxG x x x H H H Page G * Denotes Molded Fitting s in Bold feature Heavy Duty Branches (SDR ) Third party tested and listed by CSA, NSF and UPC
9 Gasketed Sewer Fittings SDR G x 0 x 0 x 0 x x x x x 0 Eccentric Increaser Coupling GxG ,.,7.,90.,0.,9.0,.0,79.,.,.,7.0,.70,.9,7.7,7.9,00.0,.9,97.,.0,.0,.7,9.,09.97,.,0.0 0 x 0 x 0 x x x x x 0 Eccentric Increaser Bushing SxG ,0.0,0.0,07.0,00.79,.,9.,.,.7,9.9,.9,7.09,.,0.9,9.0,.9,0.7,.00,.7,.,9.79,.79,9.,0.0 Gasketed C900 Adapter Coupling GxG Gasket SDR Sewer Hub x Gasket C900 Hub x x x 0 x 0 x H70 H70 H70 H70 H7 H7 H7 H7 H ,7.,0.9,7.,9. Manhole Adapter without Pipe Stop SxG Sand Finish x x x 0 x 0 x 7 x 7 x x L90 L90 L90 L900 L90 L90 L90 L90 L90 L907 L90 L ,.9,.,.7,00.7 Gasketed C900 Adapter Bushing SxG Chamfer SDR Sewer Spigot x Gasket C900 Hub x x x 0 x 0 x H70 H70 H70 H70 H7 H7 H7 H7 H ,77.,0.,79.90,909. Gasketed C900 Adapter Bushing SxG C900 Spigot x SDR Gasket Hub x x x 0 x 0 x H900 H900 H900 H9000 H900 H900 H900 H900 H ,7.,00.,.7,. * Denotes Molded Fitting s in Bold feature Heavy Duty Branches (SDR ) Third party tested and listed by CSA, NSF and UPC Page G9
10 x 0 x 0 x x 0 x 0 x 0 x 0 x G G G H7 H H9 H0 H0 H H9 H9 H9 H90 H9 G9 G9 G9 L90 L9 Gasketed Sewer Adapter HxG Solvent Sewer Hub x Gasket Sewer Hub Gasketed DWV Adapter Coupling GxDWV G Gasket Sewer Hub x Gasket DWV Hub Solvent Sewer to DWV Adapter Coupling HxDWV G Solvent Sewer Hub x Gasket DWV Hub Solvent DWV Adapter Bushing SxDWV H Chamfer Sewer Spigot x Solvent DWV Hub x 0 x 7 x 7 x 0 x 0 x x x x 0 x 0 x G90 G90 G90 L900 L90 L90 L90 L90 L90 L907 H H H H90 H90 H9 G9 G9 G9 G0 G09 L00 L00 L0 Gasketed Sewer Adapter SxG Solvent Sewer Spigot x Gasket Sewer Hub Gasketed DWV Adapter Bushing SxDWV G Chamfer Sewer Spigot x Gasket DWV Hub Solvent Weld Sewer Adapter SxH Chamfer Sewer Spigot x Solvent Sewer Hub DWV Adapter Sleeve DWV SxSewer G DWV Spigot x Gasket Sewer Hub ,., Temporary Plug Polyethylene (S) * * * G G G Vertical Riser Adapter SxS G9 G9 G InLine Backwater Valve GxG 0 L00 L00 L00 L00 L0.0.,7.,.9,9.9 Terminal Backwater Valve (G) 0 L00 L00 L00 L00 L IntelliCap with M Marker * * IntelliDisc with M Marker * * Stainless Steel Clamp (QuickLock) / Width P P Recommended in lb torque, not to exceed 0in lb.0.09 Stainless Steel Clamp (Standard) 9/ Width Not to exceed 00in lb torque.. Skirt Gasket for Saddle Tee INLET INLET G00 G Skirt Gasket for Saddle Wye INLET INLET G0 G Page G0 * Denotes Molded Fitting s in Bold feature Heavy Duty Branches (SDR ) Third party tested and listed by CSA, NSF and UPC
11 Gasketed Sewer Fittings SDR G * * * * Skirt gasket included Saddle Tee with Stainless Steel Clamps Short Gasket Skirt x Gasket Inlet * * * * Skirt gasket included Saddle Wye with Stainless Steel Clamps Short Gasket Skirt x Gasket Inlet Saddle Tee with Stainless Steel Clamps Short Gasket Skirt x Gasket Inlet w/ Locator Rib Skirt gasket included Saddle Wye with Stainless Steel Clamps Short Gasket Skirt x Gasket Inlet w/ Locator Rib Skirt gasket included Saddle Tee with Stainless Steel Clamps Extended Solvent Skirt x Gasket Inlet x x x 0 x 0 x 0 x x x x x , ,0., ,7.7,.,. 0.. Saddle Wye with Stainless Steel Clamps Extended Solvent Skirt x Gasket Inlet x x x 0 x 0 x 0 x x x x x , ,7., ,0.9,.,.,..9.9 * Denotes Molded Fitting s in Bold feature Heavy Duty Branches (SDR ) Third party tested and listed by CSA, NSF and UPC Page G
12 Reducing Tee Vertical Riser Kit x x HDB0 HDB x x Reducing Degree Wye Vertical Riser Kit HDB HDB $7. $77.09 Reducing Sanitary Tee (TY) Vertical Riser Kit x x HDB HDB. 7. Locator for M Marker P POR Page G * Denotes Molded Fitting s in Bold feature Heavy Duty Branches (SDR ) Third party tested and listed by CSA, NSF and UPC
Solvent Weld DWV Fittings Injection Molded in Sizes 4" 12" Fabricated in Sizes 10" 24"
Solvent Weld DWV Fittings Injection Molded in Sizes " " Fabricated in Sizes 0" " D Applications The most complex installations require the most advanced fittings. Injection molded DWV fittings from Royal
PVC - WHITE PRESSURE FITTINGS PRODUCTS PRICE LIST INCLUDES: PVC SCHEDULE 40, CLASS 125, POOL/SPA, LASCOTITE, ULTRAFIX REPAIR COUPLINGS PRICE GROUP
PRICE GROUP DESCRIPTION 01 SCH 40 PVC through 8 91 SCH 40 PVC 10" AND LARGER 96 CLASS 125 10 & 12 09 POOL AND SPA 14 LASCOTITE 15 ULTRAFIX REPAIR COUPLING DISCOUNT MULTIPLIER PRODUCTS PVC - WHITE PRESSURE
PVC - WHITE PRESSURE FITTINGS L40P EFFECTIVE OCTOBER 1, 2018 REVISED PRODUCTS PRICE LIST
PRICE GROUP DESCRIPTION 01 SCH 40 PVC through 8 91 SCH 40 PVC 10" AND LARGER 96 CLASS 125 10 & 12 09 POOL AND SPA 14 LASCOTITE 15 ULTRAFIX REPAIR COUPLING DISCOUNT MULTIPLIER PRODUCTS PVC - WHITE PRESSURE
Sanitary Tees H x H x H Test Tees Hx H x H Vents Tees H x H x H Double Sanitary Tee H x H x H x H Long Radius Tee (Combly) H x H x H
ABS DWV Fittings a. Sanitary Tees H x H x H b. Test Tees Hx H x H c. Vents Tees H x H x H d. Double Sanitary Tee H x H x H x H e. Long Radius Tee (Combly) H x H x H f. Fitting Santee - Fitting x H x H
Protective Coatings: Non-lead orange paint RAL red (optional) non-lead paint Hot dipped galvanized conforming to ASTM A-153.
Technical Services: Tel: (66) 500-76 / Fax: (01) 71-7317 www.grinnell.com Grinnell Mechanical Products Grooved Fittings, Ductile Iron & Fabricated Steel General Description Grooved fittings provide an
AQUIFER DISTRIBUTION LTD. SASKATOON PH (306) FAX (306) REGINA PH (306) FAX (306) PVC - DWV PIPE
PVC - DWV PIPE Sec 15-11 010001 150 0001 0001 1 1/2" X 12 15 PVC DWV PIPE 2.76 010002 150 0001 0002 2" X 12 15 PVC DWV PIPE 3.72 010003 150 0001 0003 3" X 12 15 PVC DWV PIPE 7.66 010004 150 0001 0004 4"
RIGID PVC CONDUIT FITTINGS AND ACCESSORIES
AND ACCESSORIES APPLICATIONS Utilities Cable, data and communication lines Institutional, commercial, industrial buildings Residential applications, service entrances Street and highway underground feeds
ASTM upvc Schedule 80
ASTM upvc PRESSURE PIPING SYSTEM SPECIFICATION Pipes Standards & Quality Sch. 80 pipe is manufactured to comply with NSF Standard 61, CSA B 137.3 and ASTM D1785, consistently meeting the Quality Assurance
411 Steel Couplings. 411 Steel Couplings--Standard Length Sleeves 1/2 thru 12 Steel Pipe Sizes. Sleeve Thk. X Lgth. In.
Steel Couplings 0/0 Steel Couplings--Standard Length s 1/ thru Steel Pipe Sizes Nom. Pipe Size 1/ / 1 1 1 1/ Pipe.0 1.0 1. 1. 1.90.00.... Buna-N Gasket -000001-00 -00001-00 -00011-00 -00001-00 -00019001-00
Visit our website:
Visit our website: www.liansu.com Company Profile IANSU Overview Founded in 19, IANSU is one of the largest manufactures of plastic pipes, plastic fittings, and plastic extrusion machinery in China. Since
Corzan Dimensional Data & Weights
Volume II: 140 PVC & CPVC Dimensional Data & Weights Industrial Technical Manual Series S E C O N D E D I T I O N XIRTEC 140 PVC & CORZAN CPVC Dimensional Data and Weights www.ipexinc.com 140 PVC & CPVC
BLACK COUPLING RED 1/2 x1/ BLACK CROSS 3/ BLACK BUSHING 2-1/2
Inactive Inventory 9 002-000010 222830 BLACK NIPPLE 1/8 X 5-1/2 36 0 0 0.7664 27.59 55 002-000011 222840 BLACK NIPPLE 1/8 X 6 32 0 0 0.456 14.59 11 002-000508 229390 BLACK NIPPLE 3 x4-1/2 2 0 0 3.02 6.04
IBV Series C Carbon Steel Inverted Bucket Vertical Steam Trap
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
IBV Series Z Alloy Steel Inverted Bucket Vertical Steam Trap
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
HEAVY DUTY SWING-OUT VALVE
ISO 900 REGISTERED COMPANY Akron Brass Company. 20 All rights reserved. No portion of this can be reproduced without the express written consent of Akron Brass Company. We will not be responsible for:
HEAVY DUTY SWING-OUT VALVE
ISO 900 REGISTERED COMPANY HEAVY DUTY SWING-OUT VALVE 52 53 23 5 2 2 3 28 39 NOT USED WITH SZ HANDLE 2 NOT USED WITH SZ HANDLE 5 2 3 7 9 9 Premier Farnell Corporation. 20 All rights reserved. No portion
Conversion Kit for: 7620 and 7820 Swing-Out Valves ft-lbs ft-lbs 8835/ ft-lbs
ISO 900 REGISTERED COMPANY HEAVY DUTY SWING-OUT VALVE 52 53 23 5 2 2 3 28 39 NOT USED WITH SZ HANDLE 2 NOT USED WITH SZ HANDLE 5 2 3 7 9 9 Premier Farnell Corporation. 20 All rights reserved. No portion
/2" Heavy Duty Swing-Out
Premier Farnell Corporation. 0 All rights reserved. No portion of this can be reproduced without the express written consent of Premier Farnell Corporation. ISO 900 REGISTERED COMPANY We will not be responsible
Stainless Steel Sanitary Products. 3A & BPE Industry Standard Designs Without Brand Name Price. More For Less
Stainless Steel Sanitary Products 3A & BPE Industry Standard Designs Without Brand Name Price More For Less Material Inspection Certification EN 10204 3.1 Positive Material Identification ( PMI ) X-Ray
For ASME Committee use only.
ð15þ KD-232 PROTECTION AGAINST LOCAL FAILURE In addition to demonstrating protection against plastic collapse as defined in KD-231, the local failure criteria below shall be satisfied. KD-232.1 Elastic
External Pressure... Thermal Expansion in un-restrained pipeline... The critical (buckling) pressure is calculated as follows:
External Pressure... The critical (buckling) pressure is calculated as follows: P C = E. t s ³ / 4 (1 - ν ha.ν ah ) R E ³ P C = Critical buckling pressure, kn/m² E = Hoop modulus in flexure, kn/m² t s
API 11E - Specification for Pumping Units
API 11E - Specification for Pumping Units 5 Beam Pump Structure Requirements 5.1 General Requirements for beam pump structures are specified in the following sections. Only loads imposed on the structure
Royal Building Products Electrical Solutions Catalog
Royal Building Products Electrical Solutions Catalog ELECTRICAL SOLUTIONS ELECTRICAL SOLUTIONS WHO IS ROYAL BUILDING PRODUCTS? Our company is part of a new corporation, Axiall, formed by a merger of Georgia
Hydraulic Design Of Polyethylene Pipes
Hydraulic Design Of Polyethylene Pipes Waters & Farr polyethylene pipes offer a hydraulically smooth bore that provides excellent flow characteristics. Other advantages of Waters & Farr polyethylene pipes,
INSTALLATION INSTRUCTIONS ATV Plow Blade Part Number: (50 ), (54 ), or (60 ) Application: All Terrain Vehicles
INSTALLATION INSTRUCTIONS ATV Plow Blade Part Number: 78950 (50 ), 78954 (54 ), or 78960 (60 ) Application: All Terrain Vehicles Your safety, and the safety of others, is very important. To help you make
Note to reviewers: See next page for basis for the change shown on this page. L-3160 TANGENTIAL CONTACT BETWEEN FLANGES OUTSIDE THE BOLT CIRCLE
ASME BPVC.III.A-2017 ð17þ L-3160 TANGENTIAL CONTACT BETWEEN FLANGES OUTSIDE THE BOLT CIRCLE The design procedure is based on the assumption that the flanges are in tangential contact at their outside diameter
Serie B2.1. Flanged ductile iron ball valve. made in. Application fields. Shut-off valves E U R O P E. 18
erie B. Flanged ductile iron ball valve BRanDOni made in E U R O P E Application fields WATER CONdITIONING GA EATING INdUTRY FIRE FIGTING www.brandoni.it erie B. eries B. valves are shut-off ball valves
Technical Note PP TN Engineering Considerations for Temperature Change
Technical Note PP 814 - TN Engineering Considerations for Temperature Change www.performancepipe.com Like most materials, polyethylene is affected by temperature change. However, polyethylene s response
507F. Multi-Port Sanitary Ball Valve. Full Port ISO 5211 Mounting Pad. For Automated & Manual Service. Pharmaceutical. Bio-Technology.
507F Multi- Sanitary Ball Valve Full ISO 5 Mounting Pad For Automated & Manual Service Pharmaceutical Bio-Technology Cosmetic Food & Beverage The 507F Series //5-Way Sanitary Ball Valve The 507F is a true
Technical information CONCRETE / SOLID STONE. Reaction resin mortar, epoxy-acrylate-based with styrene USAGE INSTRUCTIONS
CONCRETE / SOLID STONE USAGE 1. AREAS OF APPLICATION Heavy load-carrying attachments in solid stone, concrete, porous concrete and light concrete Suitable for attachment points close to the edge, since
ProPress (304 FKM) 1.3
ProPress (304 FKM) 41 ProPress (304 FKM) Viega ProPress for stainless is engineered for harsh industrial environments where the piping systems may come into contact with corrosive cleaning liquids. A complete
CONNECTION DESIGN. Connections must be designed at the strength limit state
CONNECTION DESIGN Connections must be designed at the strength limit state Average of the factored force effect at the connection and the force effect in the member at the same point At least 75% of the
flexible couplings for pipe repair
A R P O L R E P flexible couplings for pipe repair 1 TABLE OF CONTENTS Advantages and Installation Arpol Repair Systems Nominal charts Material specifications Gaps between pipe ends Outside Diameter tolerances
G-FIRE FLANGE ADAPTERS
G-FIRE FLANGE ADAPTERS 21 G-FIRE FLANGE ADAPTERS Pictorial Table of Contents MATERIAL SPECIFICATIONS Issue 03, 04, 07 Cert No. 570, 669, 673 For detailed Listing and Approval information see pages 101-10
S E C T I O N 1 2 P R O D U C T S E L E C T I O N G U I D E - H E L I C A L S C R E W P I L E F O U N D A T I O N S
1. P R O D U C T S E L E C T I O N G U I D E - H E L I C A L S C R E W P I L E F O U N D A T I O N S Helical foundation pile includes a lead and extension(s). The lead section is made of a central steel
90/10 COPPER NICKEL ALLOY EUCARO 10 OFFSHORE APPLICATIONS
0/ COPPER NICKEL ALLOY EUCARO OFFSHORE APPLICATIONS 2 W O R L D O F COPPER N I CK E L Eucaro TABLE OF CONTENTS Technical Information Page - Pipes Page Inner Flanges Page - Outer Flanges Page Solid Slip-On
Eurocod 3: Proiectarea structurilor de oţel Partea 4-3: Conducte Anexa Naţională
ICS 23.020.01; 91.010.30; 91.080.10 SR EN 1993-4-3/NA ROMANIAN STANDARD 2011 Eurocode 3: Design of steel structures. Part 4-3: Pipelines. National Annex Eurocod 3: Proiectarea structurilor de oţel Partea
7 Revised AM001 Rev. 01/17
Spare Parts Price Book The Spare Parts Price Book will be used for procuring replacement parts under WMATA s micro purchasing method. While the Spare Parts Price Book is a mandatory submission for your
Edward C. Robison, PE, SE. 02 January Architectural Metal Works ATTN: Sean Wentworth th ST Emeryville, CA 94608
Edward C. Robison, PE, SE ks ATTN: Sean Wentworth 1483 67 th ST Emeryville, CA 94608 02 January 2013 SUBJ: 501 CORTE MADERA AVE, CORTE MADERA, CA 94925 BALCONY GUARD BASE PLATE MOUNTS The guards for the
SECTION 4 INSERT FITTINGS, PLASTIC FITTINGS, CLAMPS
Telephone: -9-9- - Toll Free: -00--3 Fax: -9-9-30 - www.boshart.com SECTION INSERT FITTINGS, PLASTIC FITTINGS, CLAMPS PRODUCT LINE PAGE METAL INSERT FITTINGS No Lead Bronze Adapters..........................................................................
Cam Roller Guides. The Drive and Control Company. Service Automation. Electric Drives and Controls. Linear Motion and Assembly Technologies
Industrial Hydraulics Electric Drives and Controls Linear Motion and Assembly Technologies Pneumatics Service Automation Mobile Hydraulics Cam Roller Guides The Drive and Control Company Linear Motion
Innovation in. Motionless Mixers
Innovation in Motionless Mixers Ross Motionless Mixers PIONEERING TECHNOLOGY. INCOMPARABLE QUALITY. WORLDWIDE LEADERSHIP. Serving all the process industries in virtually every industrialized country around
American Earthquake Joint System for Resistance to Earthquake-Induced Ground Deformation
American Earthquake Joint System for Resistance to Earthquake-Induced Ground Deformation Final Report Submitted to: Mr. David Drake American Cast Iron Pipe Company P.O. Box 2727 Birmingham, AL 35202 USA
Viega ProPress Systems
Viega ProPress Systems The global leader in plumbing, heating and pipe joining systems Viega ProPress Systems Viega... The global leader in plumbing, heating and pipe joining systems. Building on Tradition
xanik API 6D Trunnion Ball Valves
API 6D Trunnion Ball Valves BV - XANIK SIDE ENTRY TRUNNION BALL VALVES table of contents BALL VALVES INDEX BV - XANIK SIDE ENTRY TRUNION BALL VALVES BV - 3 XANIK BALL VALVE DESIGN FEATURES BV - 4 thru
Guidelines for the Installation of SYGEF Pipes, Fittings and Valves
Guidelines for the Installation of SYGEF Pipes, Fittings and Valves Calculation of Length Changes Length changes which occur in SYGEF can be calculated in the usual manner, taking into consideration the
MODULE F: SIMPLE CONNECTIONS
MODULE F: SIMPLE CONNECTIONS This module of CIE 428 covers the following subjects Connector characterization Failure modes of bolted shear connections Detailing of bolted connections Bolts: common and
Te l e p h o n e C o n d u i t & F i t t i n g s C a t a l o g
Te l e p h o n e C o n d u i t & F i t t i n g s C a t a l o g HIGHLAND VALLEY SUPPLY, INC STANDARD TERMS AND CONDITONS OF SALE Payment Terms: Payment terms are printed on every invoice. Invoices not paid
Dimensions of propulsion shafts and their permissible torsional vibration stresses
(Feb 2005) (orr.1 Mar 2012) (orr.2 Nov 2012) Dimensions of propulsion shafts and their permissible torsional vibration stresses.1 Scope This UR applies to propulsion shafts such as intermediate and propeller
Series Shrink Boot Adapters. Series Shrink Boot, EMI/RFI, Strain Relief. Series Shrink Boot, EMI/RFI, Shield Sock
Product Selection Guide How For a complete Table of Contents please see the last page of this book Series 310 - Shrink Boot Adapters The adapters in this section are designed to accommodate lipped-type
0T 0TS S T TS T TS T TS 0T T T T T T 6T T TS 6T 6TS T TS 6T 6TS 6T 6TS 6T 6TS Frame.. 6. 6 6... 6.... B 6 6... A..... 0..0... 6.... 6.....06 6.66.. 6.0.....6 0... C 6..0 6. 6....... E.. D....... F 6............
Fittings and Pipe Connections
KWD Market Report Fittings and Pipe Connections Europe 2016 Situation and Trends for Heating & Plumbing Pipe Systems Contents: 1. Fittings and pipe connections Europe 2016 page 6 2. Terms and definitions
Viega PureFlow Press Zero Lead Fittings with Attached Sleeves For Use with Viega PureFlow PEX Tubing. Potable Water. Residential Fire Sprinkler.
Viega PureFlow Press Zero Lead Fittings with Attached Sleeves For Use with Viega PureFlow PEX Tubing Project: Engineer: Contractor: Submitted By: Potable Water Residential Fire Sprinkler Other 1 of 18
ISEmax CAM40/CAS40. Technical Information
Technical Information Online measurement of nutrient parameters Ion-selective electrode system for the continuous measurement of ammonium and nitrate Application The ion-selective electrode system works
ERRATA TO THE 2000 INTERNATIONAL PLUMBING CODE. Fourth Printing, October 2002
ERRATA TO THE 2000 INTERNATIONAL PLUMBING CODE F i f t h P r i n t i n g, A u g u s t, 2 0 0 3 (Updated December 17, 2003) T a b l e 7 0 2. 2 U n d e r g r o u n d B u i l d i n g D r a i n a g e a n d
ISEmax CAS40D. Technical Information
Technical Information ISEmax CAS40D Online measurement of nutrient parameters Ion-selective electrodes for the continuous measurement of ammonium, nitrate and other ions Application The ion-selective sensor
Nickel-Plated Brass Push-In Fittings - NPTF/INCH
/INCH Tube Connections: External /8, 5/32, /4, 5/6, 3/8, /2 Thread Connections 0-32 UNF, /8, /4, 3/8, /2 Reusable thread seal, PTFE seal ring (Teflon ) - Pro-Fit Standard - Camozzi s all metal fittings
PN LINE. PN Line. PX Line. PA Line. PU Line PX LINE. PV Line PA LINE & TUBINGS PU LINE PV LINE. Brass Push-in fittings
I NDEX PV LINE PX LINE PU LINE PA LINE & TUBINGS PN LINE Brass Push-in fittings Stainless Steel Push-in fittings Brass Standard fittings and Flexible Hoses Couplings and Multiple Connectors Function fittings
DWV. ABS-DWV Pipe and Fittings. PVC-DWV Pipe and Fittings. PVC Sewer Pipe. PVC Schedule 30 DWV Thin Wall 3.25 in. O.D.
DMENONL CLOG B-DW ipe and Fittings C-DW ipe and Fittings C ewer ipe C chedule 30 DW hin Wall 3.25 in. O.D. ipe and Fittings (Updated March 23, 2011) DW DC-DW 1977-2011 Charlotte ipe and Foundry Company
SAN ANTONIO WATER SYSTEM
G:\TXC\Projects\SAWS\SAWS - Glad\03_CADD\01_Sheets\Glad_Water\01_Sheets\1 GLAD WATR CVR.dwg Sep 13, 2017-1:44pm acalderon SAN ANTONIO WATER SYSTEM SAWS WATER JOB NO. 17-5025 2017 SMP GLAD FROM PIEDMONT
PR CYCLONE SECONDARY SHUTOFF
EN PR CYCLONE SECONDARY SHUTOFF ORIGINAL INSTRUCTIONS CYCLONE SECONDARY SHUTOFF PR530 CYCLONE SECONDARY SHUTOFF PR330 CYCLONE SECONDARY SHUTOFF PR200-250 CYCLONE SECONDARY SHUTOFF PR150 TECHNICAL DATA
Laboratory Evaluation Report for: Dielectric Pipe Unions
American Society of Sanitary Engineering Seal (Certification) Program Laboratory Evaluation Report for: Dielectric Pipe Unions Tested under ASSE Standard 1079 Issued: September, 2005 Laboratory File Number
BASE. Rotary limit switch. OptiOnS. FEAtuRES. CERtiFiCAtiOnS
Rotary limit switch BASE Rotary limit switch used to control and measure the movement of industrial machines. Its compact size make it suitable for use in narrow spaces. FEAtuRES It consists of a gear
D e s i g n o f R i v e t e d J o i n t s, C o t t e r & K n u c k l e J o i n t s
D e s i g n o f R i v e t e d J o i n t s, C o t t e r & K n u c k l e J o i n t s 1. Design of various types of riveted joints under different static loading conditions, eccentrically loaded riveted joints.
Evaluation of Water Distribution Jointed Pipe Networks under Transient Ground Motions
Open Journal of Civil Engineering, 215, 5, 19-22 Published Online June 215 in SciRes. http://www.scirp.org/journal/ojce http://dx.doi.org/1.4236/ojce.215.5219 Evaluation of Water Distribution Jointed Pipe
Submittal Package. Viega PureFlow Press Polymer Fittings for Use with Viega PureFlow Tubing. Project: Engineer: Contractor: Submitted By:
Viega PureFlow Press Polymer Fittings for Use with Viega PureFlow Tubing Project: Engineer: Contractor: Submitted By: Potable Water Residential Fire Sprinkler Other of 2 Viega PureFlow Press Polymer Fittings
CV3000 Series. Characterized Insert Control Valves
CV3000 Series Characterized Insert Control Valves The CV3000 Series is a v-type control valve for precise control allowing high pressure drop capability with straight-through flow and bubble-tight shut
@Copyright 2016 SKAPS Industries.
SKAPS INDUSTRIES 571 Industrial Pkwy, Commerce, GA 30529 Phone: (706) 336 7000 Fax: (706) 336 7007 E Mail: contact@skaps.com SKAPS GEOCOMPOSITE DROP IN SPECIFICATIONS @Copyright 2016 SKAPS Industries www.skaps.com
Morehouse. Edward Lane, Morehouse Instrument Company 1742 Sixth Ave York, PA PH: web: sales:
Morehouse 1 Morehouse Edward Lane, Morehouse Instrument Company 1742 Sixth Ave York, PA 17403 PH: 717-843-0081 web: www.mhforce.com sales: edlane@mhforce.com 2 This presentation will cover the calibration
98 Series Backpressure Regulators and Relief Valves
9 Series Backpressure Regulators and Relief Valves Bulletin.:9 November 09 W TYPE 9H W TYPE 9LD Figure. Typical 9 Relief Valves Introduction W TYPE 9HD The 9 Series (Figure ) is used for backpressure or
BEARINGS Pillow Blocks
The bearing size is usually selected according to the required bearing life and reliability under a specified type of load charged on the bearing. The load applied to the bearing operating under a static
COMMON BLACK IRON & BLADE PARTS
LT RD HD SW PP 0 PP KIT, ALL BLADE LABEL 0 LABEL, BLADE CENTER 0 0 0 0 KIT, LABEL BLACK IRON COVER, HYDRAULICS 0 KIT, COTTER () / R PIN () PLOW PACK KIT, GREASE ZERK ( PACK) CONTROLS / MODULES CONTROL
ISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 21307 Second edition 2011-05-15 Plastics pipes and fittings Butt fusion jointing procedures for polyethylene (PE) pipes and fittings used in the construction of gas and water
Series 7500 Formed Metal Bellows Catalog 974C
Series 00 Formed Metal Bellows Catalog C Innovators of the industry Bellows assemblies for safety valves, control valves, and regulators. When you look for a formed bellows which is reliable, has a long
COLGED. Toptech
COLGED SPARE PARTS CATALOGUE ERSATZTEILKATALOG CATALOGUE PIECES DETACHEES CATALOGO PARTI RICAMBIO CATALOGO DE PIEZAS DE RECAMBIO CATALOGO PECAS, DE REPOSICAO Toptech -. -09-0 R L 9 0 0 0 0 9 MOD T0 MOD
8.1 Product data sheet
Schlüter -KERDI Waterproof Membrane for substrate protection 8.1 Product data sheet Application and Function Schlüter -KERDI is a crack bridging waterproof membrane made of soft polyethylene, which has
RF LOADS FIXED COAXIAL DC 22 GHz DETAIL SPECIFICATION
1/ 11 Titre / Title RF LOADS FIXED COAXIAL DC 22 GHz Rédigé par / Written by Responsabilité / Responsibility Date Signature S. POIZAT Space Project Manager Vérifié par / Verified by V. EUDELINE Space B.
The use of the Kitemark is authorized in respect of the Product(s) detailed on this Licence provided at or from the above address.
The British Standards Institution hereby grants to: Rapidrop Global Ltd Rutland Business Park Newark Road Peterborough PE1 5WA United Kingdom In respect of: BS 143 & 1256/BS EN 10242 Malleable cast iron
Summary of Bids Received For
Summary of Bids Received For Mt. Carmel Road, Vicbarb Lane & Apple Blossom Lane Local Sewer MSD ID: 10370045 Firm Name Bid Total $ $1,074,100.00 Howell Contractors Inc. $1,083,694.00 Sunesis Construction
BOLT SIZE Rec.Torque Ft/Lbs. Max Torque Ft/Lbs
BOLT SIZE Rec.Torque Ft/Lbs Max Torque Ft/Lbs "-0 5 "- "- "- 5 "- "-0 () 7 (9) (5) 5 (0) 9 () 5 () 50 () 70 (95) 00 () 5 (70) 5 (70) 5 () Material Add Suffix to P/N P09 THRU P PIPE CLAMPS FOR RIGID STEEL
Back to Basics: Realizing Cabling Determines Design. F. Patrick Mahoney, CSI CDT, RCDD Direct Supply - Aptura
Back to Basics: Realizing Cabling Determines Design F. Patrick Mahoney, CSI CDT, RCDD Direct Supply - Aptura Back to Basics: Realizing Cabling Determines Design Cabling distribution design implementation
R a t i o n a l i s e d B r a k e A c t u a t o r s
C o m m e r c i a l V e h i c l e S y s t e m s P r o d u c t C a t a l o g u e R a t i o n a l i s e d B r a k e A c t u a t o r s... for Air Disc Brake applications Disclaimer The information contained
Conductivity sensor for hygienic applications
Conductivity sensor for hygienic applications Type 8221 can be combined with Perfect for demanding applications in the hygienic industry (CIP and SIP compatible) Variants available for usage over a wide
1. Introduction. 1.1 Overview of Study:
1. Introduction 1.1 Overview of Study: Hot and cold fluid passing through long pipes causes thermal expansion and contraction in the piping system. The fluid passing through pipes also creates fluctuations
Commonwealth of Pennsylvania PA Test Method No. 729 Department of Transportation October Pages LABORATORY TESTING SECTION. Method of Test for
Commonwealth of Pennsylvania PA Test Method No. 729 Department of Transportation 14 Pages LABORATORY TESTING SECTION Method of Test for SAMPLING ROADWAY BITUMINOUS CONCRETE 1. SCOPE 1.1 This method covers
Modeling of Head Loss Components in Water Distribution to a Group of Buildings
J. Basic. Appl. Sci. Res., 3(1)34-351, 013 013, TextRoad Publication ISSN 090-4304 Journal of Basic and Applied Scientific Research www.textroad.com Modeling of Head Components in Water Distribution to
Check-Q-meter. Table of contents. Features. Functions. RE 27551/ /10 Replaces: Type FD
Check-Q-meter RE /0.0 /0 Replaces: 09.9 Type FD Nominal size... Series ax. Operating pressure 0 bar ax. Flow 0 l/min K9/ Table of contents Contents Page Features Functions Ordering details Symbols Functional
STRAPPING TABLE OF CONTENTS
STRAPPING TABLE OF CONTENTS STEEL Strapping materials - with approximately twice the breaking strength of plastic strap of a comparable cross-section. Recommended when utmost strength is required, extreme
12"CMP DIA. ELEV. PVC CI DI CMP VCP RCP RCAP LRCP LCPP STA. LA LB BM-2 ROW PI POT LF TH PVC
PLANS FOR X-REFS: FILE PATH: Z:\WEST BRANCH 3682 MAIN STREET SIDEWALK IMPROVEMENTS - PHASE 3\DRAWINGS\_PRODUCTION DRAWINGS\TITLE & INDEX PLOTTED: Thursday, May 26, 216 4:7:42 PM MAIN STREET SIDEWALK PHASE
Universal bumper to frame hitch for 27,000 33,000 lbs. GVWR trucks. Optional: carbide cutting edge, mushroom shoes, snow deflectors
DATA SPECIFICATION SHEET MEYER RP SERIES (ROAD PRO) Specifications RP-10 10 feet long by 36 inches tall, weight approximately 1600 lbs. Universal bumper to frame hitch for 27,000 33,000 lbs. GVWR trucks
20217 CLEAR STONE TON $14.20 $5, $ $ $ %
ACCOUNT NO: 10332-84-174-84300: 54250(91223) ACCOUNT NO: 10529-403-172: 54440 (91226) ACCOUNT NO: 10463-51-130: 54250 (91223) ACCOUNT NO: 10332-84-174-84300: 54250 (91223) 20217 CLEAR STONE 375.00 TON
Cat. Multi-Processors. Hydraulic Excavators. Multi-Processor/Hydraulic Excavator Compatibility. Features: Maximum Productivity.
Cat Multi-Processors Hydraulic Excavators Maximum Productivity Big challenges are reduced to small pieces, thanks to high cutting and crushing forces generated by the cross-mounted cylinder. High productivity
ZF Maschinenantriebe GmbH Industrial Drives. Planetary gearboxes Economy Series for Servomotors
ZF Maschinenantriebe GmbH Industrial rives Planetary gearboxes Economy Series for Servomotors 2 ZF-uoplan 2K Two-speed Gearboxes ZF-Ecolift Elevator Gearboxes ZF-Servoplan G ompact Gearbox ZF-Tiratron
Timber and Steel Design. Lecture 11. Bolted Connections
Timber and Steel Design Lecture 11 Bolted Connections Riveted Connections Types of Joints Failure of Joints Bearing & Friction connections Truss Joints Shear and Tension on Bolt S U R A N A R E E UNIVERSITY
RACE CATALYTIC CONVERTERS
RACE All catalytics have gr304 stainless steel bodies Our extensive history being involved in metallic converters since the introduction of this technology, means that we can supply a product that actually
Operating Instructions Validation Tool Kit, KT2 For use with USP Apparatus #1 & #2
Operating Instructions Validation Tool Kit, KT2 For use with USP Apparatus #1 & #2 P/N VALTOL-KT2 Revision 2.0 October 7, 2014 Prepared by: Quality Lab Accessories, LLC 100 Emlen Way, Suite 108 Telford,
Amphenol. Amphenol-Tuchel Electronics GmbH. Series C 146 Heavy Duty Connectors Core Programme
Amphenol Amphenol-Tuchel Electronics GmbH Series C 146 Heavy Duty Connectors Core Programme The Company General information These connectors are designed and produced in conformity with the voltage directive
Materials. Use materials meeting the following.
208.01 Section 208. SOIL EROSION AND SEDIMENTATION CONTROL 208.01 Description. Install and maintain erosion and sedimentation controls to minimize soil erosion and to control sedimentation from affecting
Mil-Stak PT/2016 PARTS MANUAL
Mil-Stak PT/0 PARTS MANUAL Mil-Stak Inc. 0 Hwy 0 West Fruitland Idaho Phone 0--0 ext - Main Assemblies ITEM PAGE P00 P00 P0 P0 PT 0 P00 Wheel Assembly Valve Block Frame Assembly PT Stackbed Assembly Receiving
Orifice Plate. Stainless Steel. Flow Data. Herz Valves UK Ltd.
Stainless Steel Orifice Plate Flow Data In this flow data manual we have endeavoured to make the information as accurate as possible. We cannot accept any responsibility should it be found that in any