Protective Coatings: Non-lead orange paint RAL red (optional) non-lead paint Hot dipped galvanized conforming to ASTM A-153.
|
|
- Gabriel Lane
- 5 years ago
- Views:
Transcription
1 Technical Services: Tel: (66) / Fax: (01) Grinnell Mechanical Products Grooved Fittings, Ductile Iron & Fabricated Steel General Description Grooved fittings provide an economical and efficient method of changing direction, adding an outlet, reducing, or capping piping systems. Grooved fittings are available in ductile iron or fabricated steel as indicated. notice The Fittings described herein must be installed and maintained in compliance with this document and the standards of any authorities having jurisdiction. Failure to do so may impair the performance of this device. The owner is responsible for maintaining their system and devices in proper operating condition. The installing contractor or manufacturer should be contacted with any questions. Technical Data Approvals: UL, FM, ULC, VdS, & LPCB. Maximum Working Pressure: See specific data sheet for rating of coupling being used. Material: Cast: Figures: 201, 210, 219, 221, 250, 251, and 260- Ductile iron conforming to ASTM A-536, Grade Fabricated Steel: Figures 301, 310, 311, 3, 31, 315, 319, 320, 321, 323, 32, 325, 327, 330, 331, 31, 32, 350, 351, 360, 372, 30, 391, 392, 393, 395, 397, 39 and 399- Carbon Steel conforming to ASTM A-53, Grade B, Sizes 1-10 Schedule 0, Sizes - 2 Standard Wall Protective Coatings: Non-lead orange paint RAL red (optional) non-lead paint Hot dipped galvanized conforming to ASTM A-153 Limited Warranty Products manufactured by Tyco Fire Suppression & Building Products (TFSBP) are warranted solely to the original Buyer for ten (10) years against defects in material and workmanship when paid for and properly installed and maintained under normal use and service. This warranty will expire ten (10) years from date of shipment by TFSBP. No warranty is given for products or components manufactured by companies not affiliated by ownership with TFSBP or for products and components which have been subject to misuse, improper installation or maintenance, corrosion, or other external sources of damage. Materials found by TFSBP to be defective shall be either repaired or replaced, at TFSBP s sole option. TFSBP neither assumes, nor authorizes any person to assume for it, any other obligation in connection with the sale of products or parts of products. TFSBP shall not be responsible for system design errors or inaccurate or incomplete information supplied by Buyer or Buyer s representatives. In no event shall TFSBP be liable, in contract, tort, strict liability or under any other legal theory, for incidental, indirect, special or consequential damages, including but not limited to labor charges, regardless of whether TFSBP was informed about the possibility of such damages, and in no event shall TFSBP s liability exceed an amount equal to the sales price. The foregoing warranty is made in lieu of any and all other warranties, express or implied, including warranties of merchantability and fitness for a particular purpose. FM For Fire Protection pressure rating, listing and approval information, contact Tyco Fire & Building Products. This limited warranty sets forth the exclusive remedy for claims based on failure of or defect in products, materials or components, whether the claim is made in contract, tort, strict liability or any other legal theory. This warranty will apply to the full extent permitted by law. The invalidity, in whole or part, of any portion of this warranty will not affect the remainder. Ordering Procedure When placing an order, indicate the full product name. Please specify the quantity, figure number, wall thickness, and size. Grinnell Mechanical Products, valves, accessories and other products are available throughout the U.S., Canada, and internationally, through a network of distribution centers. You may write directly or call for the distributor nearest you. Page 1 of 2 SEPTEMBER, 200 G10
2 Page 2 of 2 G10 Figure 1 Dimensions Figures 201 & 210 FIGURE 210 CAST 90 ELBOW FIGURE 201 CAST 5 ELBOW Pipe Size Elbows 90 Feet (m) Elbows 5 Feet (m) ANSI 1-1/ (2,) (0,3) 1-1/ (,3) 2.3 (0,7) 1.2 (0,) (60,3) / (73,0) 3.9 (1,2) (76,1).1 (1,2) (1,5) 2. (0,7) (133,0).0 (2,).0 (1,2) (2,).1 (1,3) (11,3).2 (2,5).1 (1,3) (159,0) 9.5 (2,9). (1,) (2,9). (1,) (16,3) 9.9 (3,0) 5.0 (1,5) (216,3) 13.1 (,0) (219,1) 13.1 (,0) (273,0) 16.5 (5,0).3 (2,5) (323,9) 19.9 (6,1) 9.9 (3,0) (7,0) 1.0 (5,5) (06,) 25.9 (7,9) 20.0 (6,1) (,) 23.0 (7,0) (10,1) 25.9 (7,9) (609,6) 0.0 (,2) 29.9 (9,1) Table A (1 of 2) Friction Resistance (Expressed as Equivalent Straight Pipe) Pipe Size Figure 201 Figure 210 ANSI 1-1/ (2,) 1.75 (,5) 0.9 (0,) / (,3) 1.75 (,5) (60,3) 2.00 (50,) 1. (0,) 2.0 (0,9) 2-1/ (73,0) 2.25 (57,2) (1,) 65 0 (76,1) 2.25 (57,2) (1,) (1,6) (73,0) 5.5 (2,5).75 (0,7).5 (3,9) (2,).5 (3,9) (133,0) 7.7 (3,5) 5.25 (133,) 11.3 (5,1) (3,5) 11.3 (5,1) (11,3).5 (3,9) 13.5 (6,1) (159,0) (5,) 1.6 (6,6) (5,) 1.5 (,) (16,3) (5,) 1.5 (,) (216,3) 23.0 (10,) 36.5 (16,6) (219,1) 23.0 (10,) 36.5 (16,6) (273,0).75 (0,7) 31.0 (1,1) 60.0 (27,2) (323,9) 5.25 (133,) 0.0 (1,1) 67.0 (30,)
3 G10 Page 3 of 2 Pipe Size ANSI Tee Branch Feet (m) Tee Run Feet (m) 1-1/ / / (2,) (,3) (60,3) 2.75 (73,0) 0 (76,1) (133,0) (11,3) (159,0) (16,3).500 (216,3).625 (219,1) (273,0) 10 (323,9) (06,) (609,6). (1,5) 5. (1,).0 (2,5) 9. (3,0) 10.3 (3,1).2 (3,7) 16.3 (5,0) 16.3 (5,0) 20.0 (6,1) 20.0 (6,1) 20.5 (6,3) 23. (7,2) 23. (7,2) 2. (7,6) 32. (10,0) 32. (10,0) 1.3 (,6) 9.7 (15,1) 67.9 (20,7) 7.1 (23,) 5.0 (25,9) (30,5) (35,1) (0,7) (1,2).1 (1,2).9 (1,5) (2,).0 (2,).2 (2,5) 9.5 (2,9) 9.5 (2,9) 9.9 (3,0) 13.1 (,0) 13.1 (,0) 16.5 (5,0) 19.9 (6,1) 23.0 (7,0) 25.9 (7,9) 2.9 (,) 33.1 (10,1) 0.0 (,2) For the reducing tee branches, use the value that is corresponding to the branch size. Example: For x x 2 tee, the branch value of 2 is.0 feet. For sizes not listed interpolate from the values shown. Table A (2 of 2) Friction Resistance (Expressed as Equivalent Straight Pipe) FIGURE 219 CAST TEE FIGURE 260 CAST END CAP Pipe Size Figure 219 Figure 260 ANSI / / / (33,) (2,) (,3) (60,3) 2.75 (73,0) 0 (76,1) (133,0) (11,3) (159,0) (16,3).500 (216,3).625 (219,1) (273,0) 10 (323,9).75 (0,7) 5.25 (133,) (0,) 2.7 (1,2) 5. (2,6) 5. (2,6) 7.0 (3,2) 11.5 (5,2) 11. (5,) 10.6 (,) 15.2 (6,9) 17.0 (7,7) 13.9 (6,3) 2 (11,) 2 (11,) 5.0 (20,) 5.0 (20,) 72.1 (32,7) 92.5 NPT 0. (22,) 0. (22,) 0. (22,) 0. (22,) 0. (22,) 0.9 (23,9) 0. (22,) Figure 2 Dimensions Figures 219 & (0,1) 0. (0,2) 0.6 (0,3) 0.9 (0,) 0.9 (0,) (25,) 2.6 (1,2) 0.92 (23,) 1.00 (25,).7 (2,1) 5.0 (2,3) 1.00 (25,) 1.00 (25,) 7.5 (3,) 7.5 (3,) 1.19 (30,2) 1.25 (31,) 1.25 (31,) - Available with tapped plugs. Contact Tyco Fire & Building Products.. (5,) 20.0 (9,1) 3 (16,3)
4 Page of 2 G10 FIGURE 319 FABRICATED TEE FIGURE 360 FABRICATED END CAP Pipe Size Figure 319 Figure 360* ANSI (06,) (609,6) 11.0 (279,0) (305,0) 1 (39,0) (3,0).0 (53,5) 1 (66,2) 21.0 (9,9) (5,0) (172,0).50 11,00 1 (317,5) * Available with tapped plugs. Contact Tyco Fire & Building Products. Figure 3 Dimensions Figures 319 & (20,) 50.3 (22,) 6 (29,9).0 (39,9) (5,0)
5 G10 Page 5 of 2 Pipe Size Figure 250 Figure 350 ANSI 1-1/2 x 1-1/ 0 x 32 2 x 1-1/ 50 x 32 2 x 1-1/2 50 x 0 2-1/2 x 1-1/ 65 x /2 x 1-1/2 65 x 0 2-1/2 x 2 65 x 50 3 x 1-1/ 0 x 32 3 x 1-1/2 0 x 0 3 x 2 0 x 50 3 x 2-1/2 0 x 65 x 1-1/ 100 x 32 x 1-1/2 100 x 0 x x 50 x 2-1/2 100 x 65 x x 0 5 x 1-1/2 5 x 0 5 x 2 5 x 50 5 x 2-1/2 5 x 65 5 x 3 5 x 0 5 x 5 x x x 50 6 x 2-1/2 150 x 65 6 x x 0 6 x 150 x x x 5 x x 50 x 2-1/2 200 x 65 x x 0 x 200 x 100 x x 5 x x x (,3 x 2,) x (60,3 x 2,) x (60,3 x,3) 2.75 x (73,0 x 2,) 2.75 x (73,0 x,3) 2.75 x (73,0 x 60,3) x (,9 x 2,) x (,9 x,3) x (,9 x 60,3) x 2.75 (,9 x 70,3).500 x (11,3 x 2,).500 x (11,3 x,3).500 x (11,3 x 60,3).500 x 2.75 (11,3 x 73,2).500 x (11,3 x,9) x (11,3 x,3) x (11,3 x 60,3) x 2.75 (11,3 x 73,0) x (11,3 x,9) x.500 (11,3 x 11,3) x (16,3 x 60,3) x 2.75 (16,3 x 73,0) x (16,3 x,9) x.500 (16,3 x 11,3) x (16,3 x 11,3).625 x (219,1 x 60,3).625 x 2.75 (219,1 x 73,0).625 x (219,1 x,9).625 x.500 (219,1 x 11,3).625 x (219,1 x 11,3).625 x (219,1 x 16,3) (0,7) (1,) (2,7) (2,7) (2,7) 5.9 (2,6) 5. (2,6).0 (5,5) 11.9 (5,) 11.3 (5,1) 10. (,9) 0.6 (0,3) 0. (0,) 0. (0,) (2,1).6 (2,1).5.2 (5,5).1 (5,5) FIGURE 250 CAST CONCENTRIC REDUCER FIGURE 350 FABRICATED CONCENTRIC REDUCER Figure (1 of 2) Dimensions Figure 250 & Figure 350
6 Page 6 of 2 G10 Pipe Size Figure 250 Figure 350 ANSI 10 x 250 x x x 5 10 x x x 250 x 200 x 300 x 100 x x 150 x 300 x 200 x x x x x 350 x x x x 350 x x 00 x x x x 00 x x 1 00 x x 50 x x 1 50 x x x x x x 500 x x x x x x x 50 2 x x x 600 x x x x x x x 50 2 x x x.500 (273,0 x 11,3) x (273,0 x 11,3) x (273,0 x 16,3) x.625 (273,0 x 219,1) 10 x.500 (323,9 x 11,3) 10 x (323,9 x 16,3) 10 x.625 (323,9 x 219,1) 10 x (323,9 x 273,0) 10 x (355,6 x 16,3) 10 x.625 (355,6 x 219,1) 10 x (355,6 x 273,0) 10 x 10 (355,6 x 323,9) 10 x.625 (06, x 219,1) 10 x (06, x 273,0) 10 x 10 (06, x 323,9) 10 x 10 (06, x 355,6) 10 x 10 (57,2 x 323,9) 10 x 10 (57,2 x 355,6) 10 x 10 (57,2 x 06,) 0 x (50,0 x 273,0) 0 x 10 (50,0 x 323,9) 0 x 10 (50,0 x 355,6) 0 x 10 (50,0 x 06,) 0 x 10 (50,0 x 57,2) 20 x (609,6 x 273,0) 20 x 10 (609,6 x 323,9) 20 x 10 (609,6 x 355,6) 20 x 10 (609,6 x 06,) 20 x 10 (609,6 x 57,2) 20 x 0 (609,6 x 50,0) (177,) (177,) (177,) (177,) 1 (330,2) 1 (330,2) 1 (330,2) 1 (330,2) (31,0) 1 (31,0) 1 (31,0) 21.9 (10,0) 21.6 (9,) 21.1 (9,6) 19.5 (,9) 2.0 (,7 ) 30.0 (13,6 ) 2.0 (,7 ) 33.0 (15,0 ) 5.0 (26, ) 5.5 (26,5) 59.3 (27,0) 60.0 (27,3) 6.5 (31,1) 69.5 (31,1) 70.0 (31,) 71.0 (32,3) 3.0 (37,7).0 (3,2) 5.0 (3,6) (52,3) 0.0 (5,5) 2.0 (55,5).0 (56,) 5.0 (56,) 17.0 (66,) 13.0 (62,7) 10.0 (63,6) 15.0 (65,9) 1.0 (67,3) (6,2) FIGURE 250 CAST CONCENTRIC REDUCER FIGURE 350 FABRICATED CONCENTRIC REDUCER Figure (2 of 2) Dimensions Figure 250 & Figure 350
7 G10 Page 7 of 2 FIGURE 301 FABRICATED 5 ELBOW (FULL FLOW) FIGURE 310 FABRICATED 90 ELBOW (FULL FLOW) FIGURE 3 FABRICATED 22-1/2 ELBOW FIGURE 311 FABRICATED 11-1/ ELBOW Pipe Size Figure 301 Figure 310 Figure 3 Figure 311 ANSI 1-1/ / / (2,) (,3) (60,3) 2.75 (73,0) (11,3) (16,3).625 (219,1) (273,0) 10 (323,9) (06,) (609,6) 3.3 (5,9) 7.25 (1,2) (22,3) (25,) 1 (317,5) 1 (31,0) (0,) 2.9 (1,3).6 (2,1) 7.5 (3,).5 (5,7).0 (5,) 3.0 (15,) 5 (25,) 9.0 (,5) (7,6) (52,2) 15.0 (65,) 10.0 (1,6) (133,) 3. (9,6).3 (111,3) 5.75 (16,1) 5. (19,) 7.50 (190,5) 9.50 (21,3) (273,1) 1 (31,0) (533,) (533,) 2 (609,6) 2 (65,) (3,2) 3 (91,) (0,) 2.5 (1,1) 5.0 (2,3) 6.5 (2,9) 11.7 (5,3) 21.0 (9,5) 30.0 (13,6) 60.0 (27,2) (5,) (1,6) (99,) (15,) 0.0 (217,7) 1.75 (,5) 1.75 (,5) 1. (7,) 2.00 (50,) 2.25 (57,2) 2.63 (66,) 2. (73,2) 3.13 (79,5) 3. (9,6).3 (111,3). (,0) (177.) 0. (0,2) 0.5 (0,2) 0.6 (0,3) 0.7 (0.3) (1,1).1 (1,9) 5.6 (2,5) 11.1 (5,0) 1.0 (6,) 22.0 (10,0) (20,9) 52.2 (23,7) 65.0 (29,5) 0.0 (36,3) 1.0 (50,) 1.3 (35,1) 1.3 (35,1) 1.3 (35,1) 1.50 (3,1) 1.50 (3,1) 1.75 (,5) 2.00 (50,) 2.00 (50.) 2.00 (50,) 2.13 (5,1) 2.25 (57,2) (0,2) 0.5 (0,2) 0.6 (0,3) (1,5).6 (2,1).7 (3,9) 9.1 (,1) 16.7 (7,6) 32.1 (1,6) 2.0 (19,1) 53.2 (2,2) 65.7 (29,) 9 (3,5) Figure 5 Dimensions Figures 301, 310, 3 & 311
8 Page of 2 G10 ANSI 1-1/2 x 1-1/2 x 1-1/ 0 x 0 x 32 2 x 2 x 1-1/2 50 x 50 x 0 2-1/2 x 2-1/2 x 1-1/ 65 x 65 x /2 x 2-1/2 x 1-1/2 65 x 65 x 0 2-1/2 x 2-1/2 x 2 65 x 65 x 50 3 x 3 x 1 0 x 0 x 25 3 x 3 x 1-1/2 0 x 0 x 0 3 x 3 x 2 0 x 0 x 50 3 x 3 x 2-1/2 0 x 0 x 65 x x 1-1/ 100 x 100 x 32 x x 1-1/2 100 x 100 x 0 x x x 100 x 50 x x 2-1/2 100 x 100 x 65 x x x 100 x 0 5 x 5 x 2 5 x 5 x 50 5 x 5 x 2-1/2 5 x 5 x 65 5 x 5 x 3 5 x 5 x 0 5 x 5 x 5 x 5 x x 6 x x 150 x 50 6 x 6 x 2-1/2 150 x 150 x 65 6 x 6 x x 150 x 0 6 x 6 x 150 x 150 x x 6 x x 150 x 5 x x x 200 x 50 x x x 200 x 0 x x 200 x 200 x 100 x x x 200 x 5 x x x 200 x x 10 x x 250 x x 10 x x 250 x 0 10 x 10 x 250 x 250 x x 10 x x 250 x 5 10 x 10 x x 250 x x 10 x 250 x 250 x 200 Pipe Size Figure 321 Figure x x (,3 x,3 x 2,) x x (60,3 x 60,3 x,3) 2.75 x 2.75 x (73,0 x 73,0 x 2,) 2.75 x 2.75 x (73,0 x 73,0 x,3) 2.75 x 2.75 x (73,0 x 73,0 x 60,3) x x (,9 x,9 x 33,) x x (,9 x,9 x,3) x x (,9 x,9 x 60,3) x x 2.75 (,9 x,9 x 73,0).500 x.500 x (11,3 x 11,3 x 2,).500 x.500 x (11,3 x 11,3 x,3).500 x.500 x (11,3 x 11,3 x 60,3).500 x.500 x 2.75 (11,3 x 11,3 x 73,0).500 x.500 x (11,3 x 11,3 x,9) x x (11,3 x 11,3 x 60,3) x x 2.75 (11,3 x 11,3 x 73,0) x x (11,3 x 11,3 x,9) x x.500 (11,3 x 11,3 x 11,3) x x (16,3 x 16,3 x 60,3) x x 2.75 (16,3 x 16,3 x 73,0) x x (16,3 x 16,3 x,9) x x.500 (16,3 x 16,3 x 11,3) x x (16,3 x 16,3 x 11,3).625 x.625 x (219,1 x 219,1 x 60,3).625 x.625 x (219,1 x 219,1 x,9).625 x.625 x.500 (219,1 x 219,1 x 11,1).625 x.625 x (219,1 x 219,1 x 11,3).625 x.625 x (219,1 x 219,1 x 16,3) x x (273,0 x 273,0 x 60,3) x x (273,0 x 273,0 x,9) x x.500 (273,0 x 273,0 x 11,3) x x (273,0 x 273,0 x 11,3) x x (273,0 x 273,0 x 16,3) x x.625 (273,0 x 273,0 x 219,1) 1.5 (0,7).2 (1,9).2 (1,9).2 (1,9) 5.3 (2,) 5. (2,6) 9. (,) 9.9 (,5) 10.3 (,7) 1.5 (6,6) 1. (6,7) 15.2 (6,9) 15. (7,2) 26.5 (,0) 27.0, (16,) 36.5 (16,6) 36.6 (16,6) 36. (16,7) 37.0 (16,) 57.1 (25,9) 57. (26,0) 57.6 (26,1) 57. (26,2) 5.0 (26,3) 5. (26,5) 2.7 (1,2) 5.0 (2,3) 5.5 (2,5) 9.0 (,3) 10.3 (,7) 16. (7,) 17.0 (7,7) 17.5 (7,9) FIGURE 221 CAST REDUCING TEE FIGURE 321 FABRICATED REDUCING TEE Figure 6 (1 of 2) Dimensions Figures 321 & Figures 221
9 G10 Page 9 of 2 ANSI x x x 300 x 0 x x 300 x 300 x 100 x x x 300 x 5 x x x 300 x 150 x x 300 x 300 x 200 x x x 300 x x 1 x x 350 x x 1 x 350 x 350 x x 1 x x 350 x x 1 x 350 x 350 x x 16 x 00 x 00 x x 16 x 00 x 00 x x 16 x x 00 x x 16 x 00 x 00 x x 16 x 1 00 x 00 x x 1 x 50 x 50 x x 1 x x 50 x x 1 x 50 x 50 x x 1 x 1 50 x 50 x x 1 x x 50 x x 20 x x 500 x x 20 x x 500 x x 20 x x 500 x 50 2 x 2 x x 600 x x 2 x 600 x 600 x x 2 x x 600 x x 2 x x 600 x 00 2 x 2 x x 600 x 50 2 x 2 x x 600 x 500 Pipe Size Figure 321 Figure x 10 x (323,9 x 323,9 x,9) 10 x 10 x.500 (323,9 x 323,9 x 11,3) 10 x 10 x (323,9 x 323,9 x 11,3) 10 x 10 x (323,9 x 323,9 x 219,1) 10 x 10 x.625 (323,9 x 323,9 x 219,1) 10 x 10 x (323,9 x 323,9 x 273,0) 10 x 10 x (355,6 x 355,6 x 16,3) 10 x 10 x.625 (355,6 x 355,6 x 219,1) 10 x 10 x (355,6 x 355,6 x 273,0) 10 x 10 x 10 (355,6 x 355,6 x 323,9) 10 x 10 x.500 (06, x 06, x 11,3) 10 x 10 x.625 (06, x 06, x 219,1) 10 x 10 x (06, x 06, x 273,0) 10 x 10 x 10 (06, x 06, x 323,9) 10 x 10 x 10 (06, x 06, x 355,6) 10 x 10 x.625 (57,2 x 57,2 x 219,1) 10 x 10 x (57,2 x 57,2 x 273,0) 10 x 10 x 10 (57,2 x 57,2 x 323,9) 10 x 10 x 10 (57,2 x 57,2 x 355,6) 10 x 10 x 10 (57,2 x 57,2 x 06,) 0 x 0 x 10 (50,0 x 50,0 x 355,6) 0 x 0 x 10 (50,0 x 50,0 x 06,) 0 x 0 x 10 (50,0 x 50,0 x 57,2) 20 x 20 x (609,6 x 609,6 x 273,0) 20 x 20 x 10 (609,6 x 609,6 x 323,9) 20 x 20 x 10 (609,6 x 609,6 x 355,6) 20 x 20 x 10 (609,6 x 609,6 x 57,2) 20 x 20 x 10 (609,6 x 609,6 x 06,) 20 x 20 x 0 (609,6 x 609,6 x 50,0) 1 (393,7) 1 (393,7) 1 (393,7) 1 (393,7) 1 (393,7) (50,9) (50,9) (50,9) 0.2 (36,) 0.5 (36,5) 0.7 (36,6) 0.9 (36,7) 91. (1,5) 91. (1,6) 10.0 (9,0) (9,9) (51,3) (52,2) (59,9) (6,9) 17.0 (66,7) (6,0) (7,5) (9,) (90,7) 20.0 (92,5) (155,7) (117,9) (,7) 35.0 (156,5) 37.0 (157,) (15,) (161,0) (163,3) (167,) FIGURE 221 CAST REDUCING TEE FIGURE 321 FABRICATED REDUCING TEE Figure 6 (2 of 2) Dimensions Figures 321 & Figures 221
10 Page 10 of 2 G10 ANSI Pipe Size C to LE C to SE C to LE 3 x 3 x 2 0 x 0 x 50 3 x 3 x 2-1/2 0 x 0 x x x (,9 x,9 x 60,3) x x 2.75 (,9 x,9 x 73,0) (,5) 11.5 (5,2) C to SE C to LE x x x 100 x x.500 x (11,3 x 11,3 x 60,3) (266,7) 1 (7,3) x x 2-1/2 100 x 100 x 65 x x x 100 x 0 5 x 5 x 2 5 x 5 x x.500 x 2.75 (11,3 x 11,3 x 73,0).500 x.500 x (11,3 x 11,3 x,9) x x (11,3 x 11,3 x 60,3) (266,7) (266,7) 1 (317,5) 17.0 (7,7) 1.6 (,) 23.0 (10,) FIGURE 325 FABRICATED 5 REDUCING LATERAL 5 x 5 x 2-1/2 5 x 5 x x x 2.75 (11,3 x 11,3 x 73,0) 1 (317,5) 23.5 (10,7) 5 x 5 x 3 5 x 5 x x x (11,3 x 11,3 x,9) 1 (317,5) 27.0 (,2) 5 x 5 x 5 x 5 x x x.500 (11,3 x 11,3 x 11,3) 1 (317,5) 31.0 (1,1) 6 x 6 x x 150 x x x (16,3 x 16,3 x 60,3) (15,0) 6 x 6 x 2-1/2 150 x 150 x x x 2.75 (16,3 x 16,3 x 73,0) (15,) 6 x 6 x x 150 x x x (16,3 x 16,3 x,9) (16,) 6 x 6 x 150 x 150 x x x.500 (16,3 x 16,3 x 11,3) (1,2) 6 x 6 x x 150 x x x (16,3 x 16,3 x 11,3) (20,5) x x 200 x 200 x x.625 x.500 (219,1 x 219,1 x 11,1) (27,2) x x x 200 x x.625 x (219,1 x 219,1 x 11,3) (30,9) x x x 200 x x.625 x (219,1 x 219,1 x 16,3) 1 7 (3,5) 10 x 10 x 250 x 250 x x x.500 (273,0 x 273,0 x 11,3) (520,7) 3.1 (37,7) 10 x 10 x x 250 x x x (273,0 x 273,0 x 11,3) (520,7) (5,5) 10 x 10 x x 250 x x x (273,0 x 273,0 x 16,3) (520,7) 10 (,1) 10 x 10 x 250 x 250 x x x.625 (273,0 x 273,0 x 219,1) (520,7) (53,1) x x 300 x 300 x x 10 x.500 (323,9 x 323,9 x 11,3) 2 (5,2) (177,) 13.0 (62,6) x x x 300 x 150 x x 300 x 300 x 200 x x x 300 x x 10 x (323,9 x 323,9 x 16,3) 10 x 10 x.625 (323,9 x 323,9 x 219,1) 10 x 10 x (323,9 x 323,9 x 273,0) 2 (5,2) 2 (5,2) 2 (5,2) (177,) (177,) (177,) (67,1) 16 (75,3) Figure 7 (1 of 2) Dimensions Figure 325
11 G10 Page 11 of 2 ANSI Pipe Size C to LE C to SE C to LE 1 x 1 x 350 x 350 x x 1 x x 350 x x 10 x.500 (355,6 x 355,6 x 11,3) 10 x 10 x (355,6 x 355,6 x 16,3) 2 (673,1) 2 (673,1) 7.50 (190,5) 7.50 (190,5) (0,) C to SE C to LE 1 x 1 x 350 x 350 x x 10 x.625 (355,6 x 355,6 x 219,1) 2 (673,1) 7.50 (190,5).5 (2,) 1 x 1 x x 350 x x 1 x 350 x 350 x x 16 x 6 00 x 00 x x 10 x (355,6 x 355,6 x 273,0) 10 x 10 x 10 (355,6 x 355,6 x 323,9) 10 x 10 x (06, x 06, x 16,3) 2 (673,1) 2 (673,1) 2 (736,6) 7.50 (190,5) 7.50 (190,5) (203,0) (7,5) (92,1) (9,5) FIGURE 325 FABRICATED 5 REDUCING LATERAL 16 x 16 x 00 x 00 x x 10 x.625 (06, x 06, x 219,1) 2 (736,6) (203,0) (101,2) 16 x 16 x x 00 x x 10 x (06, x 06, x 273,0) 2 (736,6) (203,0) 23.1 (106,2) 16 x 16 x 00 x 00 x x 10 x 10 (06, x 06, x 323,9) 2 (736,6) (203,0) 25. (111,3) 16 x 16 x 1 00 x 00 x x 10 x 10 (06, x 06, x 355,6) 2 (736,6) (203,0) (11,) 1 x 1 x 6 50 x 50 x x 10 x (57,2 x 57,2 x 16,3) (,) (0,2) 1 x 1 x 50 x 50 x x 10 x.625 (57,2 x 57,2 x 219,1) (,) (3,2) 1 x 1 x x 50 x x 10 x (57,2 x 57,2 x 273,0) (,) (,6) 1 x 1 x 50 x 50 x x 10 x 10 (57,2 x 57,2 x 323,9) (,) (13,3) 1 x 1 x 1 50 x 50 x x 10 x 10 (57,2 x 57,2 x 355,6) (,) (11,) 1 x 1 x x 50 x x 10 x 10 (57,2 x 57,2 x 06,) (,) (16,3) 20 x 20 x 500 x 500 x x 0 x 10 (50,0 x 50,0 x 323,9) 3 (9,0) 351. (159,) 20 x 20 x x 500 x x 0 x 10 (50,0 x 50,0 x 355,6) 3 (9,0) (167,) 20 x 20 x x 500 x 00 2 x 2 x x 600 x 00 2 x 2 x x 600 x x 0 x 10 (50,0 x 50,0 x 06,) 20 x 20 x 10 (609,6 x 609,6 x 06,) 20 x 20 x 0 (609,6 x 609,6 x 50,0) 3 (9,0) 0.00 (1016,0) 0.00 (1016,0) (172,2) 95.6 (22,) 51. (235,1) Figure 7 (2 of 2) Dimensions Figure 325
12 Page of 2 G10 H E1 E2 FIGURE 331 FABRICATED REDUCING TEE WYE G ANSI Pipe Size G H E1 E2 Approx Wt. x 3 x x 0 x x x (11,3 x,9 x,9) 1.63 (1,) 7.3 (17,5) (273,1) 5.63 (13,0) 15.9 (7,2) x 3 x 100 x 0 x x x.500 (11,3 x,9 x 11,3) (266,7) (36,2).13 (206,5) 26. (,2) 5 x 3 x 3 5 x 0 x x x (11,3 x,9 x,9) 1.25 (31,) 9.75 (27,7) (292,1) 2. (11,2) 5 x 3 x 5 5 x 0 x x x (11,3 x,9 x 11,3) 1 (317,5) (09,7).1 (20,0) 5 x x 3 5 x 100 x x.500 x (11,3 x 11,3 x,9) 1. (7,) 9.13 (231,9) 11. (301,) 6. (17,) 21.1 (9,6) 5 x x 5 x 100 x x.500 x.500 (11,3 x 11,3 x 11,3) 1. (7,) 9.13 (231,9) 1 (323,9) 7.25 (1,2) 25.6 (11,6) 6 x x x 100 x x.500 x (16,3 x 11,3 x 16,3) (63,6) (292,1) 62.0 (2,1) 6 x 5 x x 5 x x x (16,3 x 11,3 x,9) 1.25 (31,) (273,1) 1 330,2 203,2 26.7,1 6 x 5 x 150 x 5 x x x.500 (16,3 x 11,3 x 11,3) 1.25 (31,) (273,1) 13. (352,6).3 (2,9) 32.0 (1,5) x 6 x 200 x 150 x x x.500 (219,1 x 16,3 x 11,1) 1.00 (25,) 1.75 (37,7) 9.25 (235,0) (20,9) x 6 x 200 x 150 x x x.625 (219,1 x 16,3 x 219,1) 1 2 (590,6) (37,) 93.0 (2,2) Figure Dimensions Figures 331
13 G10 Page 13 of 2 E1 H G E2 FIGURE 330 FABRICATED TEE WYE ANSI 2 x 2 x 2 50 x 50 x /2 x 2-1/2 x 2-1/2 65 x 65 x 65 3 x 3 x 3 0 x 0 x 0 x x x 100 x 0 x x 100 x 100 x x 5 x 3 5 x 5 x 0 5 x 5 x 5 x 5 x x 5 x 5 5 x 5 x D5 6 x 6 x x 150 x 0 6 x 6 x 150 x 150 x x 6 x x 150 x 5 6 x 6 x x 150 x 150 x x x 200 x 0 x x 200 x 200 x 100 x x x 200 x 5 x x x 200 x 150 x x 200 x 200 x x 10 x x 250 x 0 10 x 10 x 250 x 250 x x 10 x x 250 x 5 10 x 10 x x 250 x x 10 x 250 x 250 x x 10 x x 250 x 250 x x x 300 x 0 x x 300 x 300 x 100 x x x 300 x 150 x x 300 x 300 x 200 x x x 300 x 250 x x 300 x 300 x 300 Pipe Size x x (60,3 x 60,3 x 60,3) 2.75 x 2.75 x 2.75 (73,0 x 73,0 x 73,0) x x (,9 x,9 x,9).500 x.500 x (11,3 x 11,3 x,9).500 x.500 x.500 (11,3 x 11,3 x 11,3) x x (11,3 x 11,3 x,9) x x.500 (11,3 x 11,3 x 11,3) x x (11,3 x 11,3 x 11,3) x x (16,3 x 16,3 x,9) x x.500 (16,3 x 16,3 x 11,3) x x (16,3 x 16,3 x 11,3) x x (16,3 x 16,3 x 16,3).625 x.625 x (219,1 x 219,1 x,9).625 x.625 x.500 (219,1 x 219,1 x 11,3).625 x.625 x (219,1 x 219,1 x 11,3).625 x.625 x (219,1 x 219,1 x 16,3).625 x.625 x.625 (219,1 x 219,1 x 219,1) x x (273,0 x 273,0 x,9) x x.500 (273,0 x 273,0 x 11,3) x x (273,0 x 273,0 x 11,3) x x (273,0 x 273,0 x 16,3) x x.625 (273,0 x 273,0 x 219,1) x x (273,0 x 273,0 x 273,0) 10 x 10 x (323,9 x 323,9 x,9) 10 x 10 x.500 (323,9 x 323,9 x 11,3) 10 x 10 x (323,9 x 323,9 x 16,3) 10 x 10 x.625 (323,9 x 323,9 x 219,1) 10 x 10 x (323,9 x 323,9 x 273,0) 10 x 10 x 10 (323,9 x 323,9 x 323,9) G (177.) (177.) (177.) (177.) (177.) (177.) H (177,) (266,7) (266,7) 1 (317,5) 1 (317,5) 1 (317,5) (520,7) (520,7) (520,7) (520,7) (520,7) (520,7) 2 (5,2) 2 (5,2) 2 (5,2) 2 (5,2) 2 (5,2) 2 (5,2) E (266,7) (292,1). (327,2) (36,2) 1 (362,0) (3,3) (09,7) (3,9) (,) (3,2) 1.25 (63,6) 1.19 (62,0) (536,7) 2 (590,6) 19. (505,0) (527,1) 21. (555,) 22. (51,2) (692,2) (692,2) (527,1) (56,1) 2 (603,3) 2 (660,) 2 (711,2) (77,) Figure 9, Dimensions Figure 330 E2.63 (117,6) 5.75 (16,1) 7. (200,2).13 (206,5) 9.25 (235,0) 9.63 (2,6) (261,9) (273,1) (22,7) (292,1) (355,0) (32,9) 13. (352,6) 1.3 (365,3) (37,) 1. (37,0) (37,) (00,1) (09,7) (9,0) (00,1) 1 (06,) 1 (31,) (76,3) (520,7) Approx Wt. 6.5 (2,9) 11.6 (5,3) 16.6 (7,5) 2.0 (10,9) 26.1 (11, 32.1 (1,6) 35.5 (16,1) 1.0 (1,6) 51.1 (23,2) 55.1 (25,0) 5.2 (26,) 61.0 (27,7) (5,) (50,6) 1.0 (50,) (51,3) (5,0) (59,) 13 (61,7) (63,1) 1 (66,2) (70,3) (,5) (65,) (7,) (79,) (90,7) 20.0 (10,9)
14 Page 1 of 2 G10 Pipe Size Figure 251 Figure351 ANSI 1-1/2 x 1-1/ 0 x 32 2 x 1-1/ 50 x 32 2 x 1-1/2 50 x 0 2-1/2 x 1-1/ 65 x /2 x 1-1/2 65 x 0 2-1/2 x 2 65 x 50 3 x 1-1/ 0 x 32 3 x 1-1/2 0 x 0 3 x 2 0 x 50 3 x 2-1/2 0 x 65 x 1-1/ 100 x 32 x 1-1/2 100 x 0 x x 50 x 2-1/2 100 x 65 x x 0 5 x 2 5 x 50 5 x 2-1/2 5 x 65 5 x 3 5 x 0 5 x 5 x x x 50 6 x 2-1/2 150 x 65 6 x x 0 6 x 150 x x x 5 x x 0 x 200 x 100 x x 5 x x x 250 x x (,3 x 2,) x (60,3 x 2,) x (60,3 x,3) 2.75 x (73,0 x 2,) 2.75 x (73,0 x,3) 2.75 x (73,0 x 60,3) x (,9 x 2,) x (,9 x,3) x (,9 x 60,3) x 2.75 (,9 x 73,0).500 x (11,3 x 2,).500 x (11,3 x,3).500 x (11,3 x 60,3).500 x 2.75 (11,3 x 73,0).500 x (11,3 x,9) x (11,3 x 60,3) x 2.75 (11,3 x 73,0) x (11,3 x,9) x.500 (11,3 x 11,3) x (16,3 x 60,3) x 2.75 (16,3 x 73,0) x (16,3 x,9) x.500 (16,3 x 11,3) x (16,3 x 11,3).625 x (219,1 x,9).625 x.500 (219,1 x 11,3).625 x (219,1 x 11,3).625 x (219,1 x 16,3) x.500 (273,0 x 11,3) 9.50 (21,3) 9.50 (21,3). (2,2) 5.6 (2,5) 6.7 (3,0) 7.3 (3,3) 7.9 (3,6) 11.9 (5,) (292,1) (292,1) (292,1) 13.6 (6,2) 1.9 (6,) 16.2 (7,3) (21,3) 9.50 (21,3) 9.50 (21,3) 9.50 (21,3) 9.50 (21,3) (1,1) 2.5 (1,1) 3. (1,5) 3.6 (1,6).0 (1,) (2,9) 6. (2,9) (292,1) (292,1) 9.3 (,2) 9.9 (,5) 10.7 (,9).2 (5,5). (5,) 1 (330,2) 17.9 (,1) 19.7 (9,) 21. (9,7) 23.2 (10,5) 29.7 (13,5) FIGURE 251 CAST ECCENTRIC REDUCER FIGURE 351 FABRICATED ECCENTRIC REDUCER Figure 10 (1 of 2) Dimensions Figure 251 & Figure 351
15 G10 Page 15 of 2 Pipe Size Figure 251 Figure351 ANSI 10 x x 5 10 x x x 250 x 200 x 300 x 100 x x 150 x 300 x 200 x x x x x 350 x x x x 350 x x 00 x x x x 00 x x 1 00 x x x x 50 x x 1 50 x x x x x x 500 x x x x x x x 50 2 x x x 600 x x x x x 00 2 x x 50 2 x x x (273,0 x 11,3) x (273,0 x 16,3) x.625 (273,0 x 219,1) 10 x.500 (323,9 x 11,3) 10 x (323,9 x 16,3) 10 x.625 (323,9 x 219,1) 10 x (323,9 x 273,0) 10 x (355,6 x 16,3) 10 x.625 (355,6 x 219,1) 10 x (355,6 x 273,0) 10 x 10 (355,6 x 323,9) 10 x.625 (06, x 219,1) 10 x (06, x 273,0) 10 x 10 (06, x 323,9) 10 x 10 (06, x 355,6) 10 x (57,2 x 273,1) 10 x 10 (57,2 x 323,9) 10 x 10 (57,2 x 355,6) 10 x 10 (57,2 x 06,) 0 x (50,0 x 273,0) 0 x 10 (50,0 x 323,9) 0 x 10 (50,0 x 355,6) 0 x 10 (50,0 x 06,) 0 x 10 (50,0 x 57,2) 20 x (609,6 x 273,0) 20 x 10 (609,6 x 323,9) 20 x 10 (609,6 x 355,6) 20 x 10 (609,6 x 06,) 20 x 10 (609,6 x 57,2) 20 x 0 (609,6 x 50,0) 1 (330,2) 1 (330,2) 1 (330,2) (330,2) 1 (330,2) 1 (330,2) 1 (330,2) (31,0) 1 (31,0) 1 (31,0) 1 (31,0) 31.7 (1,) 3.0 (15,) 3. (15,6). (20,3) 5.2 (20,5) 7.7 (21,6) 52.0 (23,6) 7.0 (35,) 0.0 (36,3).0 (3,1).0 (39,9) 91.0 (1,3) 9 (3,5) 99.0 (,9) 10.0 (7,2) (9,9) (51,3) (53,1) 1.0 (5,9) 15.0 (65,) 19.0 (67,6) (6,9) 15 (70,) (72,6) 17.0 (7,9) (1,2) 1.0 (3,5) 19.0 (5,7) 19.0 (,0) (90,3) FIGURE 251 CAST ECCENTRIC REDUCER FIGURE 351 FABRICATED ECCENTRIC REDUCER Figure 10 (2 of 2) Dimensions Figure 251 & Figure 351
16 Page 16 of 2 G10 FIGURE 372 FABRICATED CONCENTRIC REDUCER GROOVE x MALE THREAD FIGURE 30 FABRICATED FEMALE THREAD ADAPTER GROOVE x FEMALE THREAD Pipe Size ANSI 1-1/2 x 1 0 x 25 2 x 3/ 50 x 20 2 x 1 50 x 25 2 x 1-1/ 50 x 32 2 x 1-1/2 50 x 0 2-1/2 x 1-1/ 65 x /2 x 1-1/2 65 x 0 2-1/2 x 2 65 x 50 3 x 1 0 x 25 3 x 1-1/2 0 x 0 3 x 2 0 x 50 3 x 2-1/2 0 x /2 x 3 90 x 0 x 1-1/2 100 x 0 x x 50 x 2-1/2 100 x 65 x x 0 5 x 5 x x x 50 6 x x 0 6 x 150 x x x x (,3 x 33,7) x (63,0 x 26,7) x (63,0 x 33,7) x (63,0 x 2,) x (63,0 x,3) 2.75 x (73,0 x 2,) 2.75 x (73,0 x,3) 2.75 x (73,0 x 60,3) x (,9 x 33,7) x (,9 x,3) x (,9 x 60,3) x 2.75 (,9 x 73,0) 0 x (101,6 x,9).500 x (11,3 x,3).500 x (11,3 x 60,3).500 x 2.75 (11,3 x 73,0).500 x (11,3 x,9) x.500 (11,3 x 11,3) x (16,3 x 60,3) x (16,3 x,9) x.500 (16,3 x 11,3) x (16,3 x 11,3) (63.5) (63.5) (63.5) (63.5) (0,3) (0,) 0. (0,) 0. (0,) (0,7) 1.5 (0,7) (1,2).5. (2,7). (2,7) 5.9 (2,7) 5. (2,6) Pipe Size ANSI / / / (33,) (2,) (,3) (60,3) 2.75 (73,0) (52,) 2.3 (5,7) 2.3 (5,7) (2,5) 0.7 (0.3) 1. (0.6) 1.5 (0.7) 1.6 (0,7) 1.9 (0,9) 2.5 (1,1).5 Figure 11 Dimensions Figure 372 & Figure 30
17 G10 Page 17 of 2 ANSI 1-1/2 x 1-1/2 x 1-1/ 0 x 0 x 32 2 x 2 x 1-1/2 50 x 50 x 0 2-1/2 x 2-1/2 x 1-1/ 65 x 65 x /2 x 2-1/2 x 1-1/2 65 x 65 x 0 2-1/2 x 2-1/2 x 2 65 x 65 x 50 3 x 3 x 1-1/2 0 x 0 x 0 3 x 3 x 2 0 x 0 x 50 3 x 3 x 2-1/2 0 x 0 x 65 x x 1-1/2 100 x 100 x 0 x x x 100 x 50 x x 2-1/2 100 x 100 x 65 x x x 100 x 0 5 x 5 x 2 5 x 5 x 50 5 x 5 x 3 5 x 5 x 0 5 x 5 x 5 x 5 x x 6 x x 150 x 50 6 x 6 x 2-1/2 150 x 150 x 65 6 x 6 x x 150 x 0 6 x 6 x 150 x 150 x x 6 x x 150 x 5 x x x 200 x 50 x x x 200 x 0 x x 200 x 200 x 100 x x x 200 x 5 x x x 200 x 150 Pipe Size Figure x x (,3 x,3 x 2,) x x (60,3 x 60,3 x,3) 2.75 x 2.75 x (73,0 x 73,0 x 2,) 2.75 x 2.75 x (73,0 x 73,0 x,3) 2.75 x 2.75 x (73,0 x 73,0 x 60,3) x x (,9 x,9 x,3) x x (,9 x,9 x 60,3) x x 2.75 (,9 x,9 x 73,0).500 x.500 x (11,3 x 11,3 x,3).500 x.500 x (11,3 x 11,3 x 60,3).500 x.500 x 2.75 (11,3 x 11,3 x 73,0).500 x.500 x (11,3 x 11,3 x,9) x x (11,3 x 11,3 x 60,3) x x (11,3 x 11,3 x,9) x x.500 (11,3 x 11,3 x 11,3) x x (16,3 x 16,3 x 60,3) x x 2.75 (16,3 x 16,3 x 73,0) x x (16,3 x 16,3 x,9) x x.500 (16,3 x 16,3 x 11,3) x x (16,3 x 16,3 x 11,3).625 x.625 x (219,1 x 219,1 x 60,3).625 x.625 x (219,1 x 219,1 x,9).625 x.625 x.500 (219,1 x 219,1 x 11,1).625 x.625 x (219,1 x 219,1 x 11,3).625 x.625 x (219,1 x 219,1 x 16,3) C to GE & C to TE 2.7 (1,2) 2.7 (1,2).3.2 (1,9) (2,) 5.5 (2,5) 5. (2,6) 9.9 (,5) 10.1 (,6) 10.3 (,7) 10.5 (,) 1.5 (6,6) 15.2 (6,9) 15. (7,2) 26.3 (11,9) 26.5 (,0) 26.5 (,0) 26.6 (.1) 27.0, (16,) 36.5 (16,6) 36.6 (16,6) 36. (16,7) 37.0 (16,) FIGURE 323 FABRICATED GROOVE X GROOVE X MALE THREAD REDUCING TEE Figure (1 of 2) Dimensions Figure 323
18 Page 1 of 2 G10 ANSI 10 x 10 x x 250 x x 10 x x 250 x 0 10 x 10 x 250 x 250 x x 10 x x 250 x 5 10 x 10 x x 250 x x 10 x 250 x 250 x 200 x x x 300 x 0 x x 300 x 300 x 100 x x x 300 x 5 x x x 300 x 150 x x 300 x 300 x 200 x x x 300 x x 1 x x 350 x x 1 x 350 x 350 x x 1 x x 350 x x 1 x 350 x 350 x x 16 x 00 x 00 x x 16 x x 00 x x 16 x 00 x 00 x x 1 x 50 x 50 x x 1 x x 50 x x 1 x 50 x 50 x x 1 x 1 50 x 50 x x 1 x x 50 x 00 2 x 2 x 600 x 600 x x 2 x x 600 x x 2 x 600 x 600 x 300 Pipe Size Figure x x (273,0 x 273,0 x 60,3) x x (273,0 x 273,0 x,9) x x.500 (273,0 x 273,0 x 11,3) x x (273,0 x 273,0 x 11,3) x x (273,0 x 273,0 x 16,3) x x.625 (273,0 x 273,0 x 219,1) 10 x 10 x (323,9 x 323,9 x,9) 10 x 10 x.500 (323,9 x 323,9 x 11,3) 10 x 10 x (323,9 x 323,9 x 11,3) 10 x 10 x (323,9 x 323,9 x 219,1) 10 x 10 x.625 (323,9 x 323,9 x 219,1) 10 x 10 x (323,9 x 323,9 x 273,0) 10 x 10 x (355,6 x 355,6 x 16,3) 10 x 10 x.625 (355,6 x 355,6 x 219,1) 10 x 10 x (355,6 x 355,6 x 273,0) 10 x 10 x 10 (355,6 x 355,6 x 323,9) 10 x 10 x.625 (06, x 06, x 219,1) 10 x 10 x (06, x 06, x 273,0) 10 x 10 x 10 (06, x 06, x 323,9) 10 x 10 x.625 (57,2 x 57,2 x 219,1) 10 x 10 x (57,2 x 57,2 x 273,0) 10 x 10 x 10 (57,2 x 57,2 x 323,9) 10 x 10 x 10 (57,2 x 57,2 x 355,6) 10 x 10 x 10 (57,2 x 57,2 x 06,) 20 x 20 x.625 (609,6 x 609,6 x 219,1) 20 x 20 x (609,6 x 609,6 x 273,0) 20 x 20 x 10 (609,6 x 609,6 x 323,9) C to GE & C to TE 1 (393,7) 1 (393,7) 1 (393,7) 1 (393,7) 1 (393,7) 57.1 (25,9) 57. (26,0) 57.6 (26,1) 57. (26,2) 5.0 (26,3) 5. (26,5) 0.2 (36,) 0.5 (36,5) 0.7 (36,6) 0.9 (36,7) 91. (1,5) 91. (1,6) (9,7) (9,9) (51,3) (52,2) (6,9) 17.0 (66,7) (7,5) (9,) (90,7) (95,7) 21 (9,0) 3.0 (151,5) 35.0 (156,5) 37.0 (157,) FIGURE 323 FABRICATED GROOVE X GROOVE X MALE THREAD REDUCING TEE Figure (2 of 2) Dimensions Figure 323
19 G10 Page 19 of 2 C to LE C to SE C to LE C to LE C to SE FIGURE 31 FABRICATED 5 LATERAL FIGURE 32 FABRICATED 90 TRUE Y Pipe Size Figure 31 Figure 32 ANSI C to LE C to SE C to LE C to SE 1-1/ (2,) 1.5 (0,7) 1-1/ (,3) 1. (0,) (60,3) (177,) / (73,0) 10.1 (,6). (2,2) (5,0) (2,7) (266,7) 1.2 (,3) 10.5 (,) (11,3) 1 (317,5) 2.9 (13,1) 15.0 (6,) (16,3) 1.50 (20,9) (165,71) (9,5) (219,1) (37,6) 35.0 (15,9) (273,0) (520,7) (165,71) 7.0 (57,6) (165,71) 50.0 (22,7) (323,9) 2 (5,2) (177,) 16 (75,3) (177,) 7.7 (39,) (673,1) 7.50 (190,5) (190,5) (7.) (06,) 2 (736,6) 30.0 (15,2) 9.1 (5,6) (,) (1,2) 1 (393,7) (3,6) (9,0) (23,6) (226,) (3,2) (23,6) 225. (102,) (609,6) 0.00 (1016,0) (19,6) 30.5 (139,9) Figure 13 Dimensions Figures 31 & 32
20 Page 20 of 2 G10 FIGURE 327 FABRICATED CROSS FIGURE 31 FABRICATED FLANGE ADAPTER ANSI CLASS 150 LBS. FIGURE 32 FABRICATED FLANGE ADAPTER ANSI CLASS 300 LBS. Pipe Size Figure 327 Figures 31 & 32 Figure 31 Figure 32 ANSI Mating Flange Bolt Qty. Mating Flange Bolt Qty. 1-1/ (2,) 2.0 (0,9) 2. (1,3).6 (2,1) 1-1/ (,3) (1,5) 7.1 (3,2) (60,3) 2.7 (1,2) 5.2 (2,).2 (3,7) 2-1/ (73,0) 5.0 (2,3).0 (3,6) 11.9 (5,) (3,2) 10.2 (,6) 15.5 (7,0) (5,) 17.2 (7,) 2.0 (,7) (11,3) 17.1 (7,) 21. (9,7) 35.0 (15,9) (16,3) 27.5 (,5) 2 (11,) 50.0 (22,7) (219,1) 7.0 (21,3) 3. (17,) 73.0 (32,7) (273,0) (30,) 65.0 (29,5) (6,7) (323,9) (,5) 91.0 (1,3) (6,9) (61,) 3.0 (55,) (90,3) (06,) 1 (7,) (6,5) (155,7) (393,7) (113,) (7,) (137,) (3,2) (10,6) (93,0) (165,6) (609,6) (260,) (0,2) (29,5) Figure 1 Dimensions Figures 327, 31 & 32
21 G10 Page 21 of 2 FIGURE 397 FABRICATED SWAGED NIPPLE GROOVE X GROOVE FIGURE 39 FABRICATED SWAGED NIPPLE GROOVE X MALE THREAD FIGURE 399 FABRICATED SWAGED NIPPLE GROOVE X PLAIN ANSI 2 x 1-1/ 50 x 32 2 x 1-1/2 50 x 0 2-1/2 x 1-1/ 65 x /2 x 1-1/2 65 x 0 2-1/2 x 2 65 x 50 3 x 1-1/ 0 x 32 3 x 1-1/2 0 x 0 3 x 2 0 x 50 3 x 2-1/2 0 x 65 x 1-1/ 100 x 32 x 1-1/2 100 x 0 x x 50 x 2-1/2 100 x 65 x x 0 5 x 1-1/2 5 x 0 5 x 2 5 x 50 5 x 2-1/2 5 x 65 5 x 3 5 x 0 5 x 5 x x x 50 6 x 2-1/2 150 x 65 6 x x 0 6 x 150 x x x 5 Pipe Size x (60,3 x 2,) x (60,3 x,3) 2.75 x (73,0 x 2,) 2.75 x (73,0 x,3) 2.75 x (73,0 x 60,3) x (,9 x 2,) x (,9 x,3) x (,9 x 60,3) x 2.75 (,9 x 73,0).500 x (11,3 x 2,).500 x (11,3 x,3).500 x (11,3 x 60,3).500 x 2.75 (11,3 x 73,0).500 x (11,3 x,9) x (11,3 x,3) x (11,3 x 60,3) x 2.75 (11,3 x 73,0) x (11,3 x,9) x.500 (11,3 x 11,3) x (16,3 x 60,3) x 2.75 (16,3 x 73,0) x (16,3 x,9) x.500 (16,3 x 11,3) x (16,3 x 11,3) 397, 39 & 399 Fabricated (177,) (177,) (177,) 2.0 (0,9) 2.0 (0,9) 3.5 (1,6) 3.5 (1,6) 3.5 (1,6) 5.0 (2,3) 5.0 (2,3) 5.0 (2,3) 5.0 (2,3).0 (3,6).0 (3,6).0 (3,6).0 (3,6).0 (3,6).0 (5,).0 (5,).0 (5,).0 (5,).0 (5,) 19.0 (,6) 19.0 (,6) 19.0 (,6) 19.0 (,6) 19.0 (,6) Figure 15 Dimensions Figures 397, 39 & 399
22 Page 22 of 2 G10 C to TE C to TE C to GE FIGURE 315 FABRICATED GROOVE X MALE THREAD 90 ELBOW C to GE FIGURE 320 FABRICATED GROOVE X GROOVE X MALE THREAD TEE Pipe Size Figure 315 Figure 320 ANSI 1-1/ / / (2,) (,3) (60,3) 2.75 (73,0) (11,3) (16,3).625 (219,1) (273,0) 10 (323,9) C to GE C to TE 7.25 (1,2) (1,7) 6.5 (2,9) 11.0 (5,0) 19. (9,0) C to GE C to TE 7.25 (1,2) 1.5 (0,7) 1.9 (0,9) 3.2 (1,5).0 (1,) (2,7) 11.0 (5,0) 23.0 (10,5) 23.0 (10,5) 3.7 (17,6) 72.1 (32,) 92.5 Figure 16 Dimensions Figures 315 & 320
23 G10 Page 23 of 2 Pipe Size Figure 391, 392, & 393 Figure 395 ANSI / (33,) (2,) 0. (0,) 3.63 (92,1) 0. (0,2) 0.7 (0,3) FIGURE 391 FABRICATED ADAPTER NIPPLE GROOVE X MALE THREAD 1-1/ (,3) 0.9 (0,) 0. (0,) (60,3) (117,5) / (73,0) (101,6 1.9 (0,9) (15,) 2.5 (1,1) 5.5 (2,5) 7.25 (1,2) 3.3 (1,5) 5.5 (2,5) FIGURE 392 FABRICATED ADAPTER NIPPLE GROOVE X GROOVE (11,3) (15,) 7. (3,) 9.75 (27,7).1 (3,7) (16,3) (15,) 9.5 (,3) 13.2 (6,0) (219,1) (273,0) (15,) 1.2 (6,) 27.0 (,2) 1 (317,5) (10,9) 29.0 (13,2) FIGURE 393 FABRICATED ADAPTER NIPPLE GROOVE X PLAIN (323,9) 33.0 (15,0) 1 (06,) (20,9) Figure 17 Dimensions Figures 391, 392, 393 & 395 FIGURE 395 FABRICATED HOSE ADAPTER NIPPLE GROOVE X HOSE
24 Page 2 of 2 G10 Pipe Size 07GT Grooved x Male Thread 07T Male Thread x Male Thread ANSI Pipe End to End End to End 1/ (21,3) (0,1) 3/ (26,7) (33,7) (0,1) (0,1) 0.3 (0,1) FIGURE 07GT CLEARFLOW DIELECTRIC WATERWAY 1-1/ (2,) (0.3) (0.3) 1-1/ (,3).0 0. (0.).0 0. (0.) (60,3) (0.5) (0.5) 2-1/ (73,0) 1.6 (0.7) 1.6 (0.7) (0.9) 2.0 (0.9) 3-1/ (1.0).5 (2.0) 2.3 (1.0).5 (2.0) FIGURE 07T CLEARFLOW DIELECTRIC WATERWAY Clearflow fittings protect plumbing systems through an innovative steel-to-plastic design that establishes a dielectric waterway. The Clearflow line of dielectric fittings separates dissimilar metals in the electrolyte (waterway) eliminating the local galvanic cell. Clearflow s metal-to-metal joint design maintains external electrical continuity, thereby preventing stray current corrosion. This feature is critical when stray current is present due to intentional or non-intentional grounding of direct current (DC) sources, such as phone systems and appliances. Clearflow fittings meet the requirements of ASTM standard F-92 for continuous use at temperatures up to 230 F (110 C). Test Data/Results and Listings Data by Pittsburgh Testing Laboratory can be provided upon request. Registered Trademark of Perfection Corp. Figure 1 Dimensions Figures 07GT & 07T General Notes: It is the Designer s responsibility to select products suitable for the intended service and to ensure that pressure ratings and performance data are not exceeded. Always read and understand the installation instructions (IH-1000M). Never remove any piping component or correct or modify any piping deficiencies without first depressurizing and draining the system. Material and gasket selection should be verified to be compatible for the specific application. Certified Company 200 TYCO FIRE SUPPRESSION & BUILDING PRODUCTS, 51 North Cannon Avenue, Lansdale Pennsylvania 196
G-FIRE GROOVED FITTINGS
G-FIRE GROOVED FITTINGS 29 Pictorial Table of Contents Figure 510 90 Cast Elbows Page 32 Figures 212 & 312 22 1 2 Elbows Page 35 Figure 501 45 Cast Elbows Page 32 Figures 211 & 311 11 1 4 Elbows Page 36
More informationG-FIRE FLANGE ADAPTERS
G-FIRE FLANGE ADAPTERS 21 G-FIRE FLANGE ADAPTERS Pictorial Table of Contents MATERIAL SPECIFICATIONS Issue 03, 04, 07 Cert No. 570, 669, 673 For detailed Listing and Approval information see pages 101-10
More informationPVC - WHITE PRESSURE FITTINGS PRODUCTS PRICE LIST INCLUDES: PVC SCHEDULE 40, CLASS 125, POOL/SPA, LASCOTITE, ULTRAFIX REPAIR COUPLINGS PRICE GROUP
PRICE GROUP DESCRIPTION 01 SCH 40 PVC through 8 91 SCH 40 PVC 10" AND LARGER 96 CLASS 125 10 & 12 09 POOL AND SPA 14 LASCOTITE 15 ULTRAFIX REPAIR COUPLING DISCOUNT MULTIPLIER PRODUCTS PVC - WHITE PRESSURE
More informationPVC - WHITE PRESSURE FITTINGS L40P EFFECTIVE OCTOBER 1, 2018 REVISED PRODUCTS PRICE LIST
PRICE GROUP DESCRIPTION 01 SCH 40 PVC through 8 91 SCH 40 PVC 10" AND LARGER 96 CLASS 125 10 & 12 09 POOL AND SPA 14 LASCOTITE 15 ULTRAFIX REPAIR COUPLING DISCOUNT MULTIPLIER PRODUCTS PVC - WHITE PRESSURE
More informationAvery Dennison LW Series Retroreflective Window Sticker Film Issued: July 2013
LW series window stickers are designed to be variable printed for use inside or outside the vehicle. Reflective permit stickers provide easy verification for authenticity. Performance: L-S-300C Table IV
More informationSmall Absolute Pressure Sensor
Small Absolute Pressure Sensor SM5420E Series FEATURES Improved stability with integrated field shields Small SO8 surface-mount package 95 millivolt span Constant current or constant voltage drive or non-ported
More informationAvery Dennison LV-0700 Series Retroreflective Validation Decal Film Issued: July 2013
LV-0700 Series Reflective film is a quality, enclosed lens retorreflective material. LV- 0700 is ideal for vehicle tag and sticker requirements where low temperature application is desired such as for
More informationSmall Gage Pressure Sensor
Small Gage Pressure Sensor FEATURES Improved stability with integrated field shields Small SO8 surface-mount package 90 millivolt output Constant current or constant voltage drive Ported configuration
More informationSmall, Gauge Pressure Sensor
Small, Gauge Pressure Sensor SM5G-GG Series FEATURES Improved stability with integrated field shields Small SO8 surface-mount package 90 millivolt output Constant current or constant voltage drive Ported
More informationCAUTION: BEFORE YOU BEGIN, ALWAYS MAKE SURE THE WEAPON IS UNLOADED AND SAFE TO HANDLE.
CAUTION: BEFORE YOU BEGIN, ALWAYS MAKE SURE THE WEAPON IS UNLOADED AND SAFE TO HANDLE. ON Press either brightness button ( + or - ) to turn on the sight. The sight is also programmed to turn on when it
More informationCorzan Dimensional Data & Weights
Volume II: 140 PVC & CPVC Dimensional Data & Weights Industrial Technical Manual Series S E C O N D E D I T I O N XIRTEC 140 PVC & CORZAN CPVC Dimensional Data and Weights www.ipexinc.com 140 PVC & CPVC
More informationTemperature Profile for 36 Marker Spheres on 3M 788 ACCR Conductor 3M Company
Temperature Profile for 36 Marker Spheres on 3M 788 ACCR Conductor 3M Company NEETRAC Project Number: 07-113 June 2007 A Research Center of the Georgia Institute of Technology Requested by: Dr. Colin McCullough
More informationWELDED STEEL PIPE NIPPLE PRICE SHEET
WARD MANUFACTURING STEEL NIPPLE PRICE SHEET PRICE SCHEDULE #600917 EFFECTIVE: SEPTEMEBER 15, 2017 117 Gulick Street, Blossburg, PA 16912 www.wardmfg.com (800) 248-1027 STANDARD BLACK 1/8" 3/4" 2.88 3.50
More informationWELDED STEEL PIPE NIPPLE PRICE SHEET
WARD MANUFACTURING STEEL NIPPLE PRICE SHEET PRICE SCHEDULE #600718 EFFECTIVE: JULY 30, 2018 117 Gulick Street, Blossburg, PA 16912 www.wardmfg.com (800) 248-1027 STANDARD BLACK 1-1/2" 2" 2-1/2" 3" 3-1/2"
More informationHoke Cajon Parker 4CNP 4-CN 4-4MCN 6CNP 6-CN 6-6MCN 8CNP 8-CN 8-8MCN 12CNP 12-CN 12-12MCN. Hoke Cajon Parker
Cross Reference CLOSE NIPPLE HEX NIPPLE REDUCING NIPPLE LONG HEX NIPPLE 4CNP 4-CN 4-4MCN 6CNP 6-CN 6-6MCN 8CNP 8-CN 8-8MCN 12CNP 12-CN 12-12MCN 1NP 1-HN 1-1MHN 2NP 2-HN 2-2MHN 4NP 4-HN; 4-4MHN 6NP 6-HN
More informationSK Series BOX PLOW INSTALLATION & OWNER S MANUAL TABLE OF CONTENTS
SK Series BOX PLOW INSTALLATION & OWNER S MANUAL TABLE OF CONTENTS SAFETY... 2 INTRODUCTIONS... 5 TIPS ON PLOWING SNOW... 6 BOX PLOW ASSEMBLY PROCEDURE... 7 BOX PLOW BLADE ASSEMBLY DRAWING AND PARTS LIST...
More informationLow Pressure Sensor Amplified Analog Output SM6295-BCM-S
Low Pressure Sensor Amplified Analog Output SM6295-BCM-S-040-000 FEATURES Pressure range from 0 to 40 cmh 2 O 5.0 V operation Amplified analog output (10 to 90%Vdd) Compensated temperature range: 0 to
More informationProduct Data Sheet PD-0036-B. 3M PC Boardmount Plug and Receptacle, 2 mm 95X Series
Product Data Sheet PD-0036-B 3M PC Boardmount Plug and Receptacle, 2 mm 95X Series Page: 1 of 7 1.0 SCOPE...2 2.0 PRODUCT TESTED...2 3.0 GENERAL CONDITIONS...2 3.1 Test Specimens...2 3.2 Standard Test
More informationHEAVY DUTY SWING-OUT VALVE
ISO 900 REGISTERED COMPANY HEAVY DUTY SWING-OUT VALVE 52 53 23 5 2 2 3 28 39 NOT USED WITH SZ HANDLE 2 NOT USED WITH SZ HANDLE 5 2 3 7 9 9 Premier Farnell Corporation. 20 All rights reserved. No portion
More informationConversion Kit for: 7620 and 7820 Swing-Out Valves ft-lbs ft-lbs 8835/ ft-lbs
ISO 900 REGISTERED COMPANY HEAVY DUTY SWING-OUT VALVE 52 53 23 5 2 2 3 28 39 NOT USED WITH SZ HANDLE 2 NOT USED WITH SZ HANDLE 5 2 3 7 9 9 Premier Farnell Corporation. 20 All rights reserved. No portion
More informationLDR Series BOX PLOW INSTALLATION & OWNER S MANUAL TABLE OF CONTENTS
LDR Series BOX PLOW INSTALLATION & OWNER S MANUAL TABLE OF CONTENTS SAFETY... 2 INTRODUCTIONS... 5 TIPS ON PLOWING SNOW... 6 BOX PLOW ASSEMBLY PROCEDURE... 7 BOX PLOW BLADE ASSEMBLY DRAWING AND PARTS LIST...
More informationASTM upvc Schedule 80
ASTM upvc PRESSURE PIPING SYSTEM SPECIFICATION Pipes Standards & Quality Sch. 80 pipe is manufactured to comply with NSF Standard 61, CSA B 137.3 and ASTM D1785, consistently meeting the Quality Assurance
More informationMedium Pressure Sensor Analog Output
Medium Pressure Sensor Analog Output SM6844-015-A-B-5-S FEATURES Analog pressure calibrated and temperature compensated output Amplified analog output Compensated temperature range: 0 to 85oC Absolute
More informationProPress (304 FKM) 1.3
ProPress (304 FKM) 41 ProPress (304 FKM) Viega ProPress for stainless is engineered for harsh industrial environments where the piping systems may come into contact with corrosive cleaning liquids. A complete
More information/2" Heavy Duty Swing-Out
Premier Farnell Corporation. 0 All rights reserved. No portion of this can be reproduced without the express written consent of Premier Farnell Corporation. ISO 900 REGISTERED COMPANY We will not be responsible
More informationOEM Silicon Pressure Die
OEM Silicon Pressure Die SM9520 Series FEATURES High volume, cost effective Gauge configuration Constant current or constant voltage drive Millivolt output Available in 0.15, 0.60 & 1.50 PSIG full-scale
More informationHEAVY DUTY SWING-OUT VALVE
ISO 900 REGISTERED COMPANY Akron Brass Company. 20 All rights reserved. No portion of this can be reproduced without the express written consent of Akron Brass Company. We will not be responsible for:
More informationWHEN BRIGHTNESS COUNTS
WHEN BRIGHTNESS COUNTS CAUTION: BEFORE INSTALLATION, CONFIRM THAT FIREARM IS UNLOADED AND IN SAFE OPERABLE CONDITION. MOUNTING (Handgun Slide/Plate mount) To mount the TRU TEC MICRO on the slide of an
More informationUltra-Small Footprint N-Channel FemtoFET MOSFET Test EVM
User's Guide SLPU007 December 07 Ultra-Small Footprint N-Channel FemtoFET MOSFET Test EVM Contents Introduction... Description... Electrical Performance Specifications... 4 Schematic... 4 Test Setup....
More informationZeta Plus HT Series. Lenntech. Applications. Features and Benefi ts. Lenticular Depth Filter Cartridges
Lenntech info@lenntech.com Tel. +31-152-610-900 www.lenntech.com Fax. +31-152-616-289 Zeta Plus Series Zeta Plus Series is a charge-modifi ed depth fi lter constructed with high-tensile strength media
More informationInstruction Sheet COOL SERIES DUCT COOL LISTED H NK O. PR D C FE - Re ove r fro e c sed rea. I Page 1 Rev A
Instruction Sheet COOL SERIES DUCT COOL C UL R US LISTED H NK O you or urc s g t e D C t oroug y e ore s g / as e OL P ea e rea g product PR D C FE RES - Re ove r fro e c sed rea t m a o se e x o duct
More informationSM98A Harsh Media Backside Absolute Pressure Series
SM98A Harsh Media Backside Absolute Pressure Series SM98A Series FEATURES Pressure Range: 10 Bar (145 PSIA), 20 Bar (290 PSIA) On-Board temperature sensing diode Small die (1.2 mm x 1.33 mm) Backside entry
More informationRetroreflective Prismatic License Plate Film
Avery Dennison L-6050 Series Issued: April 2011 Avery Dennison L-6050 Series Retroreflective sheeting is a premium quality prismatic retroreflective material designed and engineered for the production
More informationCAUTION: BEFORE INSTALLATION, CONFIRM THAT THE CROSSBOW IS UNLOADED AND IS IN SAFE OPERATING CONDITION.
CAUTION: BEFORE INSTALLATION, CONFIRM THAT THE CROSSBOW IS UNLOADED AND IS IN SAFE OPERATING CONDITION. MOUNTING THE SCOPE Position the scope roughly on the optic rail of the crossbow (only gently tightening
More information2D Patterns MODULAR & EASY-TO-INSTALL. turf.design 844 TURF OMG. pat e n t pending
Adhesive Tile by 2D Patterns MODULAR & EASY-TO-INSTALL Glass walls, concrete floors, and exposed ceilings are the leading cause of poor office acoustics. Most offices want an open office feel, but often
More informationSN74LS157MEL. Quad 2 Input Multiplexer LOW POWER SCHOTTKY
Quad 2 Input Multiplexer The LSTTL/ MSI is a high speed Quad 2-Input Multiplexer. Four bits of data from two sources can be selected using the common Select and Enable inputs. The four buffered outputs
More informationWatercooled RF Power Pot Capacitors External Cooling System
Watercooled RF Power Pot Capacitors External Cooling System FEATURES High voltage, current, and power ratings Compact design reduces terminal self inductance and permit operation up to higher frequencies
More informationCHROMA Colorimeter Model 252
CHROMA Colorimeter Model 252 Operator s Manual Copyright 2004, Sherwood Scientific Ltd., All rights reserved 252 91 501 Issue 6 February 2007 ECN 440 G:\DOCUMENT CONTROL\Manuals\Chroma\25291501 M252 Operator
More informationMET ONE RAIN GAGE MODELS 380, 385, 380M, 385M
MODELS 380, 385, 380M, 385M REVISION: 2/96 COPYRIGHT (c) 1993-1996 CAMPBELL SCIENTIFIC, INC. WARRANTY AND ASSISTANCE The MET ONE RAIN GAGE--MODELS 380, 385, 380M, 385M is warranted by CAMPBELL SCIENTIFIC,
More informationOWNER S MANUAL. Daniels Wing Plow. Operating Instructions Illustrated Parts List
OWNER S MANUAL Daniels Wing Plow Operating Instructions Illustrated Parts List 1 Congratulations! By purchasing this Daniels Wing Plow, you can now benefit by owning the latest in state-of-the-art snow
More informationIntraSense TM Series 1-French Wire-Connected Pressure Sensor SMI-1A AAUU
IntraSense TM Series 1-French Wire-Connected Pressure Sensor SMI-1A-48-180-AAUU FEATURES Miniature size: 750 µm 220 µm 75 µm Fits within 1-French catheter products Typical drift
More informationDouble Metallized Polypropylene Film Capacitor Radial AC and Pulse Capacitor
End of Life September 018 - Alternative Device: MMKP8 Double Metallized Polypropylene Film Capacitor Radial AC and Pulse Capacitor FEATURES Material categorization: for definitions of compliance please
More informationSurface Mount Multilayer Ceramic Chip Capacitors for Safety Certified Applications
Surface Mount Multilayer Ceramic Chip Capacitors for Safety Certified Applications FEATURES Approved IEC 60384-14 Specialty: safety certified capacitors Wet build process Reliable Noble Metal Electrode
More information3M Pak 50 Boardmount Socket, P50 series P50-XXXS-XXX-EA. 3M Pak 50 Boardmount Plug, P50 series P50-XXXP-XXX-EA
Page of 8 3M Pak 50 Boardmount Socket, P50 series P50-XXXS-XXX-EA 3M Pak 50 Boardmount Plug, P50 series P50-XXXP-XXX-EA Product Specification 78-50-0-7 Revised 08-09- Page of 8 Table of Contents Title
More informationSolvent Weld DWV Fittings Injection Molded in Sizes 4" 12" Fabricated in Sizes 10" 24"
Solvent Weld DWV Fittings Injection Molded in Sizes " " Fabricated in Sizes 0" " D Applications The most complex installations require the most advanced fittings. Injection molded DWV fittings from Royal
More informationOwner's Manual NSL100B BUILDERS LEVEL NSL500B TRANSIT LEVEL
Owner's Manual NSL100B BUILDERS LEVEL NSL500B TRANSIT LEVEL 1 1. CONTENTS 2. Nomenclature page 3 3. Care and Maintenance page 4 4. Using your Instrument 4.1 Setting up your Instrument page 5 4.2 Stadia
More information3M Pak 10 Plug, PK10 series PK10-XXXPX-X-DA. 3M Pak 10 Socket, PK10 series PK10-XXXSX-X-DA
Page of 8 M Pak 0 Plug, PK0 series PK0-XXXPX-X-DA M Pak 0 Socket, PK0 series PK0-XXXSX-X-DA Product Specification Revised 08-0- Page of 8 Table of Contents Title Page.............................................................................
More informationSN74LS145MEL. 1 of 10 Decoder/Driver Open Collector LOW POWER SCHOTTKY
of 0 Decoder/Driver Open Collector The SN74LS45, -of-0 Decoder/Driver, is designed to accept BCD inputs and provide appropriate outputs to drive 0-digit incandescent displays. All outputs remain off for
More informationCoefficient of Thermal Expansion for 477-T16 ACCR
Coefficient of Thermal Expansion for 477-T16 ACCR Summary: The Coefficient of Thermal Expansion (CTE) was measured for a 477-T16 ACCR conductor. Thermal expansion as a function of temperature displays
More informationESB-M3G76-B2: Tape, Polyester Two Sided Pressure Sensitive. Tape Polyester Two Sided Pressure Sensitive. Technical Bulletin November, 2016
Ford 3 ESB-M3G76-B2: Tape, Polyester Two Sided Ford ESB-M3G76-B2 Tape Polyester Two Sided Technical Bulletin November, 2016 3M tested the following adhesive tapes to the Automotive OEM Spec: Ford ESB-M3G76-B2
More informationMODEL H3022 MAGNETIC BASE / DIAL INDICATOR / CALIPER COMBO OWNER'S MANUAL
MODEL H322 MAGNETIC BASE / DIAL INDICATOR / CALIPER COMBO OWNER'S MANUAL COPYRIGHT DECEMBER, 5 BY GRIZZLY INDUSTRIAL, INC. REVISED DECEMBER, 17 (HE) WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED
More informationMelton Series. Owners Manual. Lab Centrifuge. Model # s A C, A C, B C, B C, C C, C C, D C, D C
Melton Series Owners Manual Lab Centrifuge Model # s A-4-115-C, A-4-220-C, B-4-115-C, B-4-220-C, C-4-115-C, C-4-220-C, D-4-115-C, D-4-220-C Serial Numbers 85500 & Above NOTICE Wire this centrifuge according
More informationWS-7211U Wireless 433 MHz Weather Station. Instruction Manual
WS-7211U Wireless 433 MHz Weather Station Instruction Manual TABLE OF CONTENTS Topic Page Quick Setup 3-5 Inventory of Contents 6-7 Detailed Setup Guide Battery Installation 7 Setting the Time 8 Features
More information3M HDC Socket.100 Right Angle, PCB, 3 or 4-Row, Solder Tail or Press-Fit HDC Series
M HDC Socket.100 Right Angle, PCB, or 4-Row, Solder Tail or Press-Fit HDC Series High density -row version, up to 240 contacts single bay Mates with -row single plugs and headers High density 4-row version,
More informationHilti North America Installation Technical Manual Technical Data MI System Version
MIC-S10-AH-L 179517-1 Hilti North America Installation Technical Manual Technical Data MI System Version 1. 08.017 Terms of common cooperation / Legal disclaimer The product technical data published in
More information3M MetPak CP2 Press-Fit Header 2 mm Type C, 55 Signal Contacts, Left Guidance CP2 Series
M MetPak CP2 Press-Fit Header 25 mm basic system unit CompactPCI combines the benefits of PCI desktop architecture with the ruggedness of the U and 6U IEEE Eurocard form factor popularized by the VME bus
More information3WHB10K 3-WIRE HALF BRIDGE TERMINAL INPUT MODULE INSTRUCTION MANUAL
3WB10K 3-WIRE ALF BRIDGE TERMINAL INPUT MODULE INSTRUCTION MANUAL 3/96 COPYRIGT (c) 1996 CAMPBELL SCIENTIFIC, INC. This is a blank page. WARRANTY AND ASSISTANCE The 3WB10K 3-WIRE ALF BRIDGE TERMINAL INPUT
More information3M CP2 Press-Fit Header
M CP2 Press-it Header 25 mm basic system unit 8, 44 and 50 mm module 2 mm grid spacing allows for high signal density at low cost Eye of the Needle compliant pin press-fit design reduces manufacturing
More informationPolypropylene pleated graded-density fi lter cartridges featuring APT Construction for Extended Filter Lifetime
Lenntech info@lenntech.com Tel. +31-152-610-900 www.lenntech.com Fax. +31-152-616-289 Betafi ne Polypropylene pleated graded-density fi lter cartridges featuring APT Construction for Extended Filter Lifetime
More informationUser s Manual: MODEL 904-T CLINOMETER PAK
User s Manual: MODEL 904-T CLINOMETER PAK Model 904-T Serial No. Bipolar Output (±2.5 volts typical): Unipolar Output (0-5 volts typical): Model 870 Readout Module Serial No. (optional) 2007 Applied Geomechanics
More informationPower Resistor for Mounting onto a Heatsink Thick Film Technology
Power Resistor for Mounting onto a Heatsink Thick Film Technology FEATURES LPS high power: 1100 W Wide resistance range: 1 to 1.3 k E24 series Non inductive Easy mounting Low thermal radiation of the case
More informationRF Power Feed-Through Capacitors with Conductor Rod, Class 1 Ceramic
DB 030088, DB 03000 RF Power Feed-Through Capacitors with Conductor Rod, Class Ceramic FEATURES Small size Geometry minimizes inductance Wide range of capacitance values APPLICATIONS Filtering purposes
More informationFIELD GUIDE FOR HORUS SCOPES
www.horusvision.com TM FIELD GUIDE FOR HORUS SCOPES Your Horus scope combines fine-quality optics, combat-proven hardware and the patented Horus reticle to deliver speed and accuracy for all shooters.
More informationRF Power Feed-Through Capacitors with Conductor Rod, Class 1 Ceramic
DB 06030, DB 06040, DB 06060 RF Power Feed-Through Capacitors with Conductor Rod, Class Ceramic FEATURES Small size Geometry minimizes inductance Wide range of capacitance values APPLICATIONS Filtering
More informationPOLE WHEELS. Where the shaft is very large a cost-effective alternative is to add a pole band (see following section).
A pole wheel on the target shaft is required when using contactless sensors to generate a signal. Often an existing gear wheel can be used but where none is present a special gear, slotted or holed disk
More informationSN74LS157MEL LOW POWER SCHOTTKY
The LSTTL/MSI SN74LS157 is a high speed Quad 2-Input Multiplexer. Four bits of data from two sources can be selected using the common Select and Enable inputs. The four buffered outputs present the selected
More informationGasketed Sewer Fittings SDR 35 Injection Molded in Sizes 4 12 Fabricated in Sizes 15 36
Gasketed Sewer Fittings SDR Injection Molded in Sizes Fabricated in Sizes G while extra heavy support is provided under the pipe stop at branch intersections for added strength. Where available, reducing
More informationCR10TCR THERMOCOUPLE REFERENCE
CR10TCR THERMOCOUPLE REFERENCE REVISION: 12/96 COPYRIGHT (c) 1995-1996 CAMPBELL SCIENTIFIC, INC. This is a blank page. WARRANTY AND ASSISTANCE The CR10TCR THERMOCOUPLE REFERENCE is warranted by CAMPBELL
More informationMODEL 107 TEMPERATURE PROBE INSTRUCTION MANUAL
MODEL 107 TEMPERATURE PROBE INSTRUCTION MANUAL REVISION: 6/00 COPYRIGHT (c) 1983-2000 CAMPBELL SCIENTIFIC, INC. This is a blank page. Warranty and Assistance The MODEL 107 TEMPERATURE PROBE is warranted
More informationDriveline Components Catalog Center Bearings
J300P-9A Driveline Components Catalog Bearings Updated 8-30-2013 Page 17, Style 22, Column B: changed Bearing part number 212135-1x from 2.890 to 2.690 NEW! Spicer ХС Bearing lmproved Performance and Maintenance
More informationAC and Pulse Film/Foil Capacitors Radial Potted Type
KP186 AC and Pulse Film/Foil Capacitors Radial Potted Type FEATURES Material categorization: For definitions of compliance please see www.vishay.com/doc?9991 APPLICATIONS High voltage, very high current
More informationWatercooled RF Power Pot Capacitors Internal Cooling System
Watercooled RF Power Pot Capacitors Internal Cooling System TWXFZ 06266 FEATURES High voltage, current and power ratings Compact design reduces terminal self inductance and permit operation up to higher
More informationCR10XTCR THERMOCOUPLE REFERENCE
CR10XTCR THERMOCOUPLE REFERENCE REVISION: 1/03 COPYRIGHT (c) 1995-2003 CAMPBELL SCIENTIFIC, INC. This is a blank page. Warranty and Assistance The CR10XTCR THERMOCOUPLE REFERENCE is warranted by CAMPBELL
More informationSN74LS151MEL. 8 Input Multiplexer LOW POWER SCHOTTKY
8 Input Multiplexer The TTL/MSI SN74LS5 is a high speed 8-input Digital Multiplexer. It provides, in one package, the ability to select one bit of data from up to eight sources. The LS5 can be used as
More information3M Serial Attached SCSI (SAS) Connector Boardmount Through-Hole, Vertical Receptacle
M Serial Attached SCSI (SAS) Connector Boardmount Through-Hole, Vertical Receptacle SBR Series 6 Gbps input/output connector for backplane applications Two contact mating levels for early-mate and latebreak
More informationLUDLUM MODEL 42-5 NEUTRON BALL CART. August 2015 Serial Number PR and Succeeding Serial Numbers
LUDLUM MODEL 42-5 NEUTRON BALL CART August 2015 Serial Number PR149512 and Succeeding Serial Numbers LUDLUM MODEL 42-5 NEUTRON BALL CART August 2015 Serial Number PR149512 and Succeeding Serial Numbers
More informationINSTRUCTION MANUAL. Laser Diode Sarcomere Length. Aurora Scientific Inc. 360 Industrial Parkway South, Unit 4 Aurora, Ontario, Canada L4G 3V7
INSTRUCTION MANUAL Model 902A Laser Diode Sarcomere Length May 6, 2013, Revision 3 Copyright 2008-2013 Aurora Scientific Inc. Aurora Scientific Inc. 360 Industrial Parkway South, Unit 4 Aurora, Ontario,
More informationCR10XTCR THERMOCOUPLE REFERENCE
CR10XTCR THERMOCOUPLE REFERENCE REVISION: 01/01/03 COPYRIGHT (c) 1995-2003 CAMPBELL SCIENTIFIC, INC. This is a blank page. WARRANTY AND ASSISTANCE The CR10XTCR THERMOCOUPLE REFERENCE is warranted by CAMPBELL
More informationRuggedized Electrical Double Layer Energy Storage Capacitors
Ruggedized Electrical Double Layer Energy Storage Capacitors FEATURES Polarized energy storage capacitor with high capacity and energy density Rated voltage: 2.7 V Available in through-hole (radial) version
More informationSystem Data Sheet... 2 ProPress Product Instructions ProPress for ½" to 2" copper tubing... 3 ProPress XL for 2¼" to 4" copper tubing...
ProPress System Potable Water Hydronic Heating Chilled Water Compressed ir Nitrogen N 2 ow Pressure Steam Fire Protection Vacuum Corgon Oxygen 0 2 (non medical) rgon System Data Sheet.... 2 ProPress Product
More information1.1. Operating Parameters:
Propress System Description Propress and Propress XL are safe, reliable, and economical copper pipe installation systems that use modern cold press connection technology for a wide assortment of more than
More informationPower Resistor for Mounting onto a Heatsink Thick Film Technology
DIMENSIONS in millimeters Power Resistor for Mounting onto a Heatsink Thick Film Technology FEATURES 300 W at 85 C bottom case temperature Wide resistance range: 0.3 Ω to 900 kω E24 series Non inductive
More informationStainless Steel Sanitary Products. 3A & BPE Industry Standard Designs Without Brand Name Price. More For Less
Stainless Steel Sanitary Products 3A & BPE Industry Standard Designs Without Brand Name Price More For Less Material Inspection Certification EN 10204 3.1 Positive Material Identification ( PMI ) X-Ray
More informationPower Resistor for Mounting onto a Heatsink Thick Film Technology
Power Resistor for Mounting onto a Heatsink Thick Film Technology DESIGN SUPPORT TOOLS click logo to get started FEATURES 300 W at 85 C bottom case temperature Wide resistance range: 0.3 to 900 k E24 series
More informationAccumulators Virginia KMP Suction Line Accumulators
Accumulators Virginia KMP Suction Line Accumulators The Virginia KMP suction line accumulator's purpose is to prevent excessive quantities of liquid refrigerant and oil from returning to the compressor.
More informationMR medium rating busbar
technical information General features MR is fully compliant with S EN 0-, specifically, the rated current of the Zucchini busbar trunking systems is always rated at the average ambient temperature of
More informationNOVALYNX CORPORATION MODEL 110-WS-16BP BAROMETRIC PRESSURE SENSOR INSTRUCTION MANUAL
NOVALYNX CORPORATION MODEL 110-WS-16BP BAROMETRIC PRESSURE SENSOR INSTRUCTION MANUAL REVISION DATE: OCT 2005 Receiving and Unpacking Carefully unpack all components and compare to the packing list. Notify
More informationGlutathione S-Transferase (GST) Alpha ELISA
Package Insert Glutathione S-Transferase (GST) Alpha ELISA 96 Wells For Research Use Only v. 1.1 (10.19.17) Eagle Biosciences, Inc. 20A NW Blvd, Suite 112, Nashua, NH 03063 Phone: 866-419-2019 Fax: 617-419-1110
More informationWet Tantalum Capacitors, High Energy, Ultra High Capacitance, -55 C to +125 C Operation
Wet Tantalum Capacitors, High Energy, Ultra High Capacitance, -55 C to +125 C Operation FEATURES High energy, very high capacitance design All tantalum, hermetically sealed case Available Utilizes proven
More informationAvery Dennison L-3050 Series Retroreflective License Plate Film September 2013 Revision 2
Avery Dennison L-3050 Series Retroreflective sheeting is a premium quality enclosed lens retroreflective material designed and engineered for the production of high quality embossed license plates. It
More information3M CF Card Header CompactFlash Type I, Low Profile, Long Guides, SMT, Inverse
M CF Card Header CompactFlash Type I, Low Profile, Long Guides, SMT, Inverse 7E50 Series Headers mate with CompactFlash Type I cards 4.0 mm Low Profile height Inverse card polarization Extended guide rails
More information@Copyright 2016 SKAPS Industries.
SKAPS INDUSTRIES 571 Industrial Pkwy, Commerce, GA 30529 Phone: (706) 336 7000 Fax: (706) 336 7007 E Mail: contact@skaps.com SKAPS GEOCOMPOSITE DROP IN SPECIFICATIONS @Copyright 2016 SKAPS Industries www.skaps.com
More informationField Pro Operation and Installation Manual
Field Pro Operation and Installation Manual Xtreme Research Corporation SkyScan Division P.O. Box 336, Port Richey, FL 34673-0336 1-800-732-0665 Table of Contents 1. Installation 3 2. Operation 5 3. Care
More informationS3A - S3N General-Purpose Rectifiers
S3A - S3N General-Purpose Rectifiers Features Low-Profile Package Glass-Passivated Junction UL Flammability Classification: 94V-0 UL Certified, UL #E258596 SMC/DO-214AB COLOR BAND DENOTES CATHODE ELECTRICAL
More informationDirect Water Cooled Wirewound Resistor
Direct Water Cooled Wirewound Resistor FEATURES Direct cooling without heatsink Excellent power / volume ratio Multi resistive element option Material categorization: for definitions of compliance please
More informationZeta Plus LP Series. Lenntech. Applications. Features and Benefi ts. Lenticular Depth Filter Cartridges
Lenntech info@lenntech.com Tel. +3-52-6-9 www.lenntech.com Fax. +3-52-66-289 Zeta Plus LP Zeta Plus LP filter media is a depth filter composed of inorganic filter aid cationic resin and cellulose and is
More informationAutomatic and Manual Safety Pilot Kits
Automatic and Manual Safety Pilot Kits Technical Control Systems Information For Peterson Vented Gas Logs RH Peterson Co. 14724 Proctor Ave * City of Industry * CA 91746 * 1(800) 332 3973 Website: www.rhpeterson.com
More informationOperating Instructions for Digital Manometer. Model: MAN-SD
Operating Instructions for Digital Manometer Model: MAN-SD 1. Contents 1. Contents...2 2. Note...3 3. Instrument Inspection...3 4. Regulation Use...4 5. Operating Principle...4 6. Mechanical Connection...5
More informationJanuary price list. general information
January 0 STYLEX price list general information price list general INFORMATION W warranty terms delivered Freight Program C cal Compliance C com/col Information C control Options 5-6 c o n t e n t s warranty
More informationBB1 & BB2 INSTALLATION & MAINTENANCE INSTRUCTIONS
BB1 & BB2 INSTALLATION & MAINTENANCE INSTRUCTIONS DESCRIPTION / IDENTIFICATION The BB series valve uses Proportion- Air closed loop technology for pressure control. It gives an output pressure proportional
More information